154-620: The South Durham and Lancashire Union Railway (SD&LUR) built a railway line linking the Stockton and Darlington Railway near Bishop Auckland with the Lancaster and Carlisle Railway (the West Coast Main Line ) at Tebay , via Barnard Castle , Stainmore Summit and Kirkby Stephen . The line opened in 1861 and became known as the Stainmore Line . The Stockton and Darlington absorbed
308-487: A cantilever bridge , was drawn up by Sir Benjamin Baker and Sir John Fowler . The Forth Bridge was completed in 1890. Bouch also seems to have been involved in the design of pleasure piers. He designed Portobello Pier in 1869, which opened in 1871. The structure rusted badly and by 1917 was uneconomic to repair and was demolished. Thomas was a brother of William Bouch , the railway engine designer. Thomas Bouch bought
462-465: A locomotive works at Forth Street, Newcastle, from which the following year the S&;DR ordered two steam locomotives and two stationary engines. On 16 September 1825, with the stationary engines in place, the first locomotive, Locomotion No. 1 , left the works, and the following day it was advertised that the railway would open on 27 September 1825. The cost of building the railway had greatly exceeded
616-604: A 12-arch design constructed in brick, carried the Stanhope and Tyne Railway 175 feet (53 m) above Hownsgill. Today it forms part of the Sea to Sea Cycle Route . Bouch returned repeatedly to the problem of bridging the two great East Coast firths. Eventually authorisation was given to bridge both the Tay and the Forth; in both cases Bouch was the engineer selected to design the bridge. Bouch designed
770-446: A branch from Nunthorpe to Battersby opened on 1 June 1864; passengers were carried from 1 April 1868. A branch from Barnard Castle to Middleton-in-Teesdale opened on 12 May 1868. The locomotive works at Darlington operated independently under Bouch until 1875, the locomotives having been renumbered by the NER a few years earlier. A variety of locomotives were used, the most common type were
924-488: A branch to a mine at Skelton. This Stockton and Darlington Railway Amalgamation Act 1858 ( 21 & 22 Vict. c. cxvi) also authorised the merger of the S&DR with the railways it held on lease. An application to Parliament for a jetty in the following year was unsuccessful, but in 1860 the Upsall, Normanby & Ormesby Railway received permission for a line with access to the river, the S&DR claim of exclusive rights to
1078-668: A country house in Moffat , "his health", already not good, "more rapidly gave way... under the shock and distress of mind" caused by the disaster. However he kept offices in Edinburgh, at 111 George Street, his Edinburgh address being 6 Oxford Terrace, near Dean Bridge . He died at his house in Moffat on 30 October 1880 a few months after the public inquiry into the disaster finished. He is buried very close by, in Dean Cemetery . "In his death", said
1232-477: A day between Darlington and Tebay, with five trains a day between Kirkby Stephen and Penrith, and the line was also used for specials from Newcastle to Blackpool. The 1947 LNER timetable shows three trains a day between Darlington and Penrith, and another between Darlington and Kirkby Stephen, via the Darlington and Barnard Castle route. There were three trains a day from Darlington to Barnard Castle that continued on
1386-592: A direct connection between the West Cumbrian haematite mines and the area served by the Stockton and Darlington (which was behind them): His response to a toast at a dinner after the cutting of the first sod on the Eden Railway gave his philosophy on the engineering of those lines: The works were all of a light and inexpensive character, and if he gave them a first-class railway, - one upon which any speed attainable by
1540-481: A half miles ( 14 km) had been covered in two hours, and subtracting the 55 minutes accounted by the two stops, it had travelled at an average speed of 8 mph (13 km/h). Six waggons of coal were distributed to the poor, workers stopped for refreshments and many of the passengers from Brusselton alighted at Darlington, to be replaced by others. Two waggons for the Yarm Band were attached, and at 12:30 pm
1694-510: A horse to St Helen Auckland . The Bradshaw's railway guide for March 1843, after South Church opened, shows five services a day between Darlington and South Church via Shildon, with three between Shildon and St Helens. Also listed were six trains between Stockton and Hartlepool via Seaton over the Clarence Railway and the Stockton and Hartlepool Railway that had opened in 1841. By this time, Port Darlington had become overwhelmed by
SECTION 10
#17328523311061848-481: A jetty at Cargo Fleet , from where a ferry would carry the ore across the Tees to the blast furnaces. When the proposal was before Parliament the S&DR suggested that their Middlesbrough & Redcar could be extended to Saltburn , and the Tees crossed by a swing bridge. The Cleveland Railway received permission for a line from Skinningrove as far as Guisborough, and the S&DR permission for an extension to Saltburn and
2002-399: A locomotive engine could be run with perfect safety and ease - if he gave it without any extravagance, then he should only have done his duty, but if he failed then he should deserve all the obloquy and discredit attaching to the failure of light works. … Mr Whitwell had spoken of his character as a maker of cheap railways, but in giving a cheap Eden Valley railway he had relied entirely upon
2156-507: A locomotive took them forward. When returning, regulations required that the carriages run loose down the Sunniside Incline and they were let to run into Crook station, controlled by the guard using the carriage brakes. Later, a 730 feet (220 m) viaduct replaced the two inclines at Hownes Gill ravine on 1 July 1858. A deviation replacing Nanny's Mayor's Incline, as well as a curve that allowed trains from Crook direct access to Rowley,
2310-407: A man clinging to the outside of a waggon fell off and his foot was crushed by the following vehicle. As work on the final section of track to Stockton's quayside was still ongoing, the train halted at the temporary passenger terminus at St John's Well 3 hours, 7 minutes after leaving Darlington. The opening ceremony was considered a success and that evening 102 people sat down to a celebratory dinner at
2464-713: A maximum speed of 6 mph (9.7 km/h); the drivers were fined if caught travelling faster than 8 mph (13 km/h), and one was dismissed for completing the forty-mile return journey in 4 + 1 ⁄ 2 hours. On average there were about 40 coal trains a day, hauling 28 waggons with a weight of 116 tons. There were about 5,000 privately owned waggons, and at any one time about 1,000 stood at Shildon depot. The railway had modern passenger locomotives, some with four wheels. There were passenger stations at Stockton, Middlesbrough, Darlington, Shildon and West Auckland, and trains also stopped at Middlesbrough Junction, Yarm Junction, Fighting Cocks and Heighington. Some of
2618-452: A mine and the S&DR started hauling ironstone to their blast furnaces west of Bishop Auckland. By 1851 Derwent Iron had opened a mine in the area and began moving ironstone 54 miles (87 km) to Consett. The iron ore from Cleveland is high in phosphorus and needs to be mixed with purer ores, such as those on the west coast in Cumberland and Lancashire . In the early 1850s this ore
2772-472: A mine in the area and began moving ironstone 54 miles (87 km) to Consett, and the S&DR had paid the arrears on its debt and was able to pay a dividend the following year, albeit only 4 per cent; between 1849 and 1853 the traffic more than doubled. In 1852, the Leeds Northern Railway (LNR) built a line from Northallerton to a junction with the Stockton to Hartlepool line and a section of
2926-399: A population of over 2,000 and at the 2011 census had over 138,000 people. In 1830, the company opened new offices at the corner of Northgate and Union Street in Darlington. Between 1831 and 1832 a second track was laid between Stockton and the foot of Brusselton Bank. Workshops were built at Shildon for the maintenance and construction of locomotives. In 1830 approximately 50 horses shared
3080-501: A railway between England and Scotland and favoured a railway via the west coast. Railway financier George Hudson chaired a meeting of representatives of north-eastern railways that wished a railway to be built via the east coast. In the 1830s a number of railways had opened in the area between Darlington and Newcastle, and Robert Stephenson was engaged to select a route using these railways as much as possible. The Newcastle and Darlington Junction Railway (N&DJR) differed slightly from
3234-596: A railway that could be used by anyone with suitably built vehicles on payment of a toll, that was closed at night, and with which land owners within 5 miles (8 km) could build branches and make junctions; no mention was made of steam locomotives. This new railway initiated the construction of more railway lines, causing significant developments in railway mapping and cartography, iron and steel manufacturing, as well as in any industries requiring more efficient transportation. Concerned about Overton's competence, Pease asked George Stephenson , an experienced enginewright of
SECTION 20
#17328523311063388-538: A rebuilt Darlington Bank Top station, rejoining the route to Stockton from a junction south of Darlington and a new line to Oak Tree Junction. An extension from Stanhope to Wearhead opened in 1895, and the line over Stainmore to Tebay was doubled by the end of the century. From 1913 former S&DR lines were electrified with 1,500 VDC overhead lines and electric locomotives hauled coal trains between Shildon and Erimus Marshalling Yard , which had opened in 1908 between Middlesbrough and Thornaby. The trains took
3542-845: A route from the East Coast Main Line (ECML) at Northallerton via Richmond , Barnard Castle , the Tees Valley , Stainmore and the Eden Valley to the L&;CR at Clifton . A rival scheme, the Yorkshire & Glasgow Union Railway, left the ECML at Thirsk , crossed the Pennines to Hawes , then Kirkby Stephen , Appleby and so reached Clifton. The Leeds and Carlisle left the Leeds Northern Railway near Headingley and passed through Wharfedale to Hawes and
3696-509: A route that bypassed Darlington and Yarm, and a meeting was held in Yarm to oppose the route. The Welsh engineer George Overton was consulted, and he advised building a tramroad. Overton carried out a survey and planned a route from the Etherley and Witton Collieries to Shildon , and then passing to the north of Darlington to reach Stockton . The Scottish engineer Robert Stevenson was said to favour
3850-494: A ship's hold could discharge coal from the bottom. About 18,500 tons of coal was transported to ships in the year ending June 1827, and this increased to over 52,000 tons the following year, 44.5% of the total carried. The locomotives were unreliable at first. Soon after opening, Locomotion No. 1 broke a wheel, and it was not ready for traffic until 12 or 13 October; Hope , the second locomotive, arrived in November 1825 but needed
4004-502: A short section of the former SD&LUR line west of the main station building, which has also been restored by volunteers. Public passenger services were launched in August 2011 as part of a Stainmore 150 gala, which celebrated 150 years since the SD&;LUR was opened. As part of this celebration, a replica Stainmore Summit sign was cast and was erected in the position of the original. Parts of
4158-419: A southwards facing junction was built at Tebay after protracted negotiations with the L&CR. A new station was built to replace the terminus at Barnard Castle. A mineral train ran between Barnard Castle and Barras on 26 March 1861, and mineral traffic worked through to Tebay from 4 July 1861. After an opening ceremony on 7 August 1861, the SD&LUR was open to passengers the following day. Stations opened on
4312-469: A speed of 42 mph (68 km/h) was recorded. Over 200,000 passengers were carried in the year to 1 October 1838, and in 1839 there were twelve trains each day between Middlesbrough and Stockton, six trains between Stockton and Darlington, and three between Darlington and Shildon, where a carriage was fitted with Rankine 's self-acting brake, taken over the Brussleton Inclines , and then drawn by
4466-577: A station until confirmation had been received that the line was clear. By 1857, a blast furnace had opened close to the Durham coalfield on the north side of the Tees. Backed by the rival West Hartlepool Harbour & Railway , the Durham & Cleveland Union Railway proposed a line from the mines in Skinningrove and Staithes , via Guisborough and a bridge over the Middlesbrough & Redcar Railway to
4620-606: A stationary engine. Sponsored by the Derwent Iron Company, the 10-mile (16 km) line was built by the S&DR and opened on 16 May 1845. A passenger service started to Hownes Gill and Stanhope (Crawley) on 1 September 1845; the Stanhope service was withdrawn at the end of 1846. Travelling north from Crook the carriages and waggons were drawn up the Sunniside Incline, a locomotive hauled the mixed train to Waskerley Park Junction, then they were let down Nanny Mayor's Incline and
4774-445: A stop and was run down by a locomotive. The rule book stated that locomotive-hauled trains had precedence over horse-drawn trains, but some horse drivers refused to give way and on one occasion a locomotive had to follow a horse-drawn train for over 2 miles (3 km). The committee decided in 1828 to replace horses with locomotives on the main line, starting with the coal trains, but there was resistance from some colliery owners. After
South Durham and Lancashire Union Railway - Misplaced Pages Continue
4928-400: A usable line could be built within the bounds of the act of Parliament, but another route would be shorter by 3 miles (5 km) and avoid deep cuttings and tunnels. Overton had kept himself available, but had no further involvement and the shareholders elected Stephenson Engineer on 22 January 1822, with a salary of £660 per year. On 23 May 1822 a ceremony in Stockton celebrated the laying of
5082-427: A week and a one-way journey on Tuesdays and Saturdays. In April 1826, the operation of the coach was contracted for £200 a year; by then the timetabled journey time had been reduced to 1 hour 15 minutes, and passengers were allowed to travel on the outside for 9d. A more comfortable coach, Express , started the same month and charged 1s 6d for travel inside. Innkeepers began running coaches, two to Shildon from July, and
5236-410: A week to ready it for the line – the cast-iron wheels were a source of trouble. Two more locomotives of a similar design arrived in 1826; that August, 16s 9d was spent on ale to motivate the men maintaining the engines. By the end of 1827, the company had also bought Chittaprat from Robert Wilson and Experiment from Stephenson. Timothy Hackworth , locomotive superintendent, used the boiler from
5390-491: The Bishop Auckland and Weardale Railway Act 1837 ( 7 Will. 4 & 1 Vict. c. cxxii) of July 1837 to build an 8 + 1 ⁄ 4 -mile (13.3 km) line from South Church to Crook . The line opened on 8 November 1843 with a station at Bishop Auckland . The Stanhope and Tyne Railway , a 33 + 3 ⁄ 4 -mile (54.3 km) line between South Shields and Stanhope had opened in 1834. Steam locomotives worked
5544-493: The Middlesbrough and Guisborough Railway Act 1852 ( 15 & 16 Vict. c. lxxiii) on 17 June 1852; Pease had to guarantee dividends to raise the finance needed. The 9 + 1 ⁄ 2 -mile (15.3 km) single-track railway was worked by the S&DR, and opened to minerals on 11 November 1853 and passengers on 25 February 1854. With electric telegraph installed between stations, passenger trains were not permitted to leave
5698-660: The Wear Valley Railway Act 1845 ( 8 & 9 Vict. c. clii), was the Wear Valley Railway, a 12-mile (19 km) line from the Bishop Auckland & Weardale line to Frosterley . The line opened on 3 August 1847, and the act also gave the S&DR permission for the Bishopley branch, over which 500,000 tons of limestone travelled in 1868. The line was extended in 1862 from Frosterley to Stanhope . Just before
5852-517: The 0-6-0 s used on mineral trains. Later locomotives were of the Stephenson long boilered type. Most passenger locomotives were 2-4-0 s, though some were 2-2-2 s. Bouch designed two 4-4-0 locomotives for the line over Stainmore in 1860, and another fourteen with this wheel arrangement had been built by 1874. S&DR services and those on the ECML called at different stations in Darlington until 1887, when S&DR trains were diverted through
6006-533: The Belah Viaduct , 1,040 feet (320 m) long and 196 feet (60 m) high. A new station was built to replace the terminus at Barnard Castle. A mineral train ran between Barnard Castle and Barras on 26 March 1861, and mineral traffic worked through to Tebay from 4 July 1861. There was an opening ceremony on 7 August 1861 and the SD&LUR west of Barnard Castle opened to passengers the following day. Two 4-4-0 locomotives with enclosed cabs had been built for
6160-490: The Duke of Cleveland between Bishop Auckland and Barnard Castle, and it was a condition of the enabling Act that work on the two lines must be simultaneous. Attempts in 1847 and 1848 to repeal this clause failed and the company failed to raise the necessary finance to start work, its powers lapsed and was wound up. In summer 1850 Henry Bolckow and John Vaughan discovered a seam of iron ore at Eston , North Yorkshire. They opened
6314-526: The Earl of Darlington 's fox coverts, it was opposed and defeated by 13 votes. Overton surveyed a new line that avoided Darlington's estate and agreement was reached with Eldon, but another application was deferred early in 1820, as the death of King George III had made it unlikely a bill would pass that parliamentary year. The promoters lodged a bill on 30 September 1820, the route having changed again as agreement had not been reached with Viscount Barrington about
South Durham and Lancashire Union Railway - Misplaced Pages Continue
6468-556: The Eden Valley . These schemes came together as the Northern Counties Union Railway, which was given authority by the Northern Counties Union Railway Act 1846 ( 9 & 10 Vict. c. cclx) for a 69 miles (111 km) line from Thirsk to Clifton and a 50 + 1 ⁄ 4 miles (80.9 km) line from Bishop Auckland to Tebay . However, it would have cost £35,000 to pass through the estate of
6622-489: The Great North of England Railway (GNER), a line from York to Newcastle that used the route of the 1 + 1 ⁄ 2 -mile (2.4 km) Croft branch at Darlington. The railway was to be built in sections, and to allow both to open at the same time permission for the more difficult line through the hills from Darlington to Newcastle was to be sought in 1836 and a bill for the easier line south of Darlington to York presented
6776-498: The London & North Western Railway , to the south. The ceremonial cutting of the first sod for the SD&LUR was at Kirkby Stephen on 25 August 1857, and that for the EVR was at Appleby on 28 July 1858. Land for two tracks purchased, but a single track line was laid. Bouch had laid out an economical route that followed the contours and avoided tunnels, but there were formidable gradients up to
6930-546: The River Wear who supplied London and feared competition, and it had been necessary to restrict the rate for transporting coal destined for ships to 1 ⁄ 2 d per ton per mile, which had been assumed would make the business uneconomic. There was interest from London for 100,000 tons a year, so the company began investigations in September 1825. In January 1826, the first staith opened at Stockton, designed so waggons over
7084-466: The South Esk Viaduct , at Montrose , but after another inspection, the bridge was demolished and replaced. The remains of the original Tay bridge were demolished and replaced by an entirely new design by William Henry Barlow and his son Crawford Barlow. Some of the wrought iron girders were re-used in the new double track bridge by cutting them in half and re-welding to form wider structures for
7238-477: The Union , which served the Yarm branch from 16 October. There were no stations: in Darlington the coaches picked up passengers near the north road crossing, whereas in Stockton they picked up at different places on the quay. Between 30,000 and 40,000 passengers were carried between July 1826 and June 1827. The export of coal had become the railway's main business, but the staiths at Stockton had inadequate storage and
7392-726: The York, Newcastle and Berwick Railway , before the discovery of iron ore in Cleveland and the subsequent increase in revenue meant it could pay its debts. At the beginning of the 1860s it took over railways that had crossed the Pennines to join the West Coast Main Line at Tebay and Clifton, near Penrith . The company was taken over by the North Eastern Railway in 1863, transferring 200 route miles (320 route kilometres) of line and about 160 locomotives, but continued to operate independently as
7546-634: The ferry slip ) which led a subsequent President of the Institution of Civil Engineers to settle any dispute over priority of invention with the observation that "there was little merit in a simple conception of this kind, compared with a work practically carried out in all its details, and brought to perfection." Bouch then set up on his own as a railway engineer, working chiefly in Scotland and Northern England. Lines he designed include four connecting lines all built by separate companies, which together allowed
7700-468: The 1,370 feet (420 m) high Stainmore Summit . Valleys were crossed by viaducts, including three made from wrought-iron that crossed the Tees, Deepdale and Belah rivers and cost a total of £77,400. The viaducts at Tees Valley, Deepdale, Belah and Smardale Gill were built wide enough for two tracks. The route between West Auckland and Barnard Castle was changed after negotiations with the Duke of Cleveland, and
7854-401: The 1860s, some surviving and still carrying railway traffic. Being the engineer, Thomas Bouch was blamed for the collapse of the Tay bridge. His assistant, Charles Meik , conveyed the impression that he "was aptly named", implying that he had no real influence over the design and construction. After the inquiry, Bouch rapidly removed and reinforced similar lugs on the new bridge he had built,
SECTION 50
#17328523311068008-649: The Brusselton Inclines were bypassed by a line from the north end of Shildon Tunnel; the same year a passenger service started on the Hagger Leases branch and a mineral line opened from Crook via two inclines to Waterhouse. The section of the SD&LUR between West Auckland and Barnard Castle opened for minerals in July 1863 and passengers on 1 August 1863, together with a direct line from Bishop Auckland to West Auckland. Stations at Evenwood and Cockfield replaced stations on
8162-527: The Darlington Section until 1876. S&DR opening was seen as proof of steam railway effectiveness and its anniversary was celebrated in 1875, 1925 and 1975. Much of the original route is now served by the Tees Valley Line , operated by Northern . Coal from the inland mines in southern County Durham used to be taken away on packhorses , and then horse and carts as the roads were improved. A canal
8316-724: The Derwent Valley; by 1860 this had grown into the Newcastle, Derwent & Weardale Railway, which now bypassed the S&DR and linked with the SD&LUR, and the North British and London & North Western (LNWR) railways were providing two thirds of the capital. The LNWR proposed to build warehouses in Hartlepool and buy shares in the West Hartlepool Railway . The North Eastern Railway (NER), formed in 1854 by amalgamation, at
8470-462: The Duke of Cleveland's estate, as he had opposed an earlier railway. An application that year failed, but the Darlington and Barnard Castle Railway Act 1854 ( 17 & 18 Vict. c. cxv) was given royal assent on 3 July 1854 and the 15 + 1 ⁄ 4 -mile (24.5 km) railway opened on 8 July 1856. Cleveland iron ore is high in phosphorus and needs to be mixed with purer ores, such as those on
8624-915: The GNER route in the southern section before joining the Durham Junction Railway at Rainton and using the Pontop & South Shields Railway from Washington to Brockley Whins, where a new curve onto the Brandling Junction Railway allowed direct access to Gateshead. This required the construction of 25 + 1 ⁄ 2 miles (41.0 km) of new line, 9 miles (14 km) less than the GNER route, but trains would need to travel 7 + 1 ⁄ 2 miles (12.1 km) further. This route ran parallel to S&DR lines for 5 miles (8.0 km) and Pease argued that it should run over these as it would add only 1 + 1 ⁄ 2 miles (2.4 km). The bill
8778-474: The Hagger Leases Branch and to build a bridge across the Tees at least 72 feet (22 m) wide and 19 feet (5.8 m) above low water, so as not to affect shipping. Two members of the management committee resigned, as they felt that Stockton would be adversely affected by the line, and Meynell, the S&DR chairman, stepped down from leadership. The Clarence Railway was approved a few days later, with
8932-634: The Hagger Leases branch. In 1859, a company had been formed to link the Newcastle & Carlisle Railway with the SD&R via the Derwent Valley; by 1860 this had grown into the Newcastle, Derwent & Weardale Railway, which now bypassed the SD&R and linked with the SD&LUR, and the North British and London and North Western (LNWR) railways were providing two-thirds of the capital. The LNWR proposed to build warehouses in Hartlepool and buy shares in
9086-542: The NER than eventually becoming part of the LNWR, entered negotiations. Opposed by the NER, the Newcastle, Derwent & Weardale Railway bill was approved by the House of Commons in 1861, but the line was eventually rejected by the House of Lords. The SD&LUR and EVR were absorbed by the S&DR on 30 June 1862. With 200 route miles (320 km) of line and about 160 locomotives, the Stockton and Darlington Railway became part of
9240-474: The North Eastern Railway on 13 July 1863. Due to a clause in the act of Parliament, the railway was managed as the independent Darlington Section until 1876, when the lines became the NER's Central Division. After the restoration of the dividend in 1851, by the end of 1854 payments had recovered to 8 per cent and then had not dropped below 7 + 1 ⁄ 2 per cent. The NER had built a branch in
9394-569: The North Eastern area of the London and North Eastern Railway (LNER). The passenger service was withdrawn north of Tow Law on 1 May 1939. Britain's railways were nationalised on 1 January 1948 and the lines were placed under the control of British Railways . In the early 1950s control was split between the North Eastern and London Midland regions with Kirkby Stephen as the boundary. Local passenger trains were withdrawn between Kirkby Stephen and Tebay on 1 December 1952. The service along Weardale
SECTION 60
#17328523311069548-572: The Old Channel of the Tees. The S&DR prepared to return to Parliament but withdrew after a design for a drawbridge was agreed with the Navigation Company. The line to Middlesbrough was laid with malleable iron rails weighing 33 lb/yd (16 kg/m), resting on oak blocks. The suspension bridge had been designed to carry 150 tons, but the cast iron retaining plates split when it was tested with just 66 tons and loaded trains had to cross with
9702-502: The S&DR bought out the coach companies in August 1832, a mixed passenger and small goods service began between Stockton and Darlington on 7 September 1833, travelling at 12–14 miles per hour (19–23 km/h); locomotive-hauled services began to Shildon in December 1833 and to Middlesbrough on 7 April 1834. The company had returned the five per cent dividend that had been promised by Edward Pease, and this had increased to eight per cent by
9856-474: The S&DR had share capital of £250,000 but owed £650,000, most of this without the authority of Parliament until 1849; the debt was converted into shares in 1851. In mid-1850, Henry Bolckow and John Vaughan discovered a seam of iron ore at Eston . They opened a mine, laid a branch line to the Middlesbrough & Redcar Railway and started hauling ironstone over the S&DR to their blast furnaces west of Bishop Auckland. By 1851, Derwent Iron had opened
10010-536: The S&DR installed Alexander Bain 's "I and V" electric telegraph to regulate the passage of trains through the tunnel. The SD&R provided a 3 + 1 ⁄ 4 hour service between Darlington and Newcastle, with a four-horse omnibus from South Church to Rainton Meadows on the Durham Junction Railway , from where trains ran to Gateshead , on the south side of the River Tyne near Newcastle. By 1839,
10164-654: The S&DR introduced a service between Darlington and Coxhoe, on the Clarence Railway, where an omnibus took passengers the 3 + 1 ⁄ 2 miles (5.6 km) to the Durham & Sunderland Railway at Shincliffe. Early in 1842, the nominally independent Shildon Tunnel Company opened its 1,225-yard (1,120 m) tunnel through the hills at Shildon to the Wear basin and after laying 2 miles (3.2 km) of track to South Church station , south of Bishop Auckland , opened in May 1842. In 1846,
10318-457: The S&DR's line near today's Newton Aycliffe station with Haverton and Stockton, via a route that was 6 miles (10 km) shorter than via the route of the S&DR, and named the Clarence Railway in honour of the Duke of Clarence, later King William IV . Meetings held in Stockton in early 1828 supported the Tees Navigation and the Clarence Railway, but the S&DR received permission for its branch on 23 May 1828 after promising to complete
10472-436: The SD&LUR crossed the Pennines via Kirkby Stephen to meet the West Coast Main Line (WCML) at Tebay , on the section then controlled by the Lancaster and Carlisle Railway , and also linked Barnard Castle with West Auckland. The EVR was a branch from Kirkby Stephen to the WCML near Penrith via Appleby . The routes were surveyed by Thomas Bouch and SD&LUR received permission on 13 July 1857. The EVR route followed
10626-452: The SD&LUR, and the Stockton and Darlington became a constituent of the North Eastern Railway . The line closed in stages between 1952 and 1962. A short section of the line at Kirkby Stephen East station has been restored by the Stainmore Railway Company . When the Lancaster and Carlisle Railway (L&CR) was approved in June 1844 there were a number of schemes for a railway over the Pennines . The York & Carlisle Railway proposed
10780-451: The St Andrews Railway showed). Bouch did the initial survey for the Edinburgh Suburban and Southside Junction Railway , laid out tramway systems in Edinburgh, Glasgow, Dundee and London, and designed the Redheugh viaduct a road bridge across the Tyne at the same height as and not far upstream of Stephenson's High Level Bridge . He also designed Hownes Gill Viaduct in Consett , County Durham, which at 700 feet (210 m) long and using
10934-455: The Tees Valley Junction. The NER opened the Tees Valley Railway to Middleton-in-Teesdale in 1868. Doubling of the line to Tebay, except for Belah and Kirkby Stephen and Kirkby Stephen and Sandy Bank had been approved by 1875. The section between Belah to Kirkby Stephen was approved in 1889, and this involved the doubling of the Aitygill, Merrygill and Podgill viaducts. Smardale Gill Viaduct was built wide enough for double track, but single track
11088-640: The Town Hall. The railway that opened in September 1825 was 25 miles (40 km) long and ran from Phoenix Pit, Old Etherley Colliery, to Cottage Row, Stockton; there was also a 1 ⁄ 2 mile (800 m) branch to the depot at Darlington, 1 ⁄ 2 mile (800 m) of the Hagger Leases branch, and a 3 ⁄ 4 mile (1,200 m) branch to Yarm. Most of the track used 28 pounds per yard (13.9 kg/m) malleable iron rails, and 4 miles (6.4 km) of 57 + 1 ⁄ 2 lb/yd (28.5 kg/m) cast iron rails were used for junctions. The line
11242-469: The West Hartlepool Harbour & Railway. The North Eastern Railway (NER), formed in 1854 by amalgamation, at the time was the largest railway company in the country and controlled the East Coast Main Line from Knottingley , south of York, through Darlington to Berwick-upon-Tweed . When they approached the S&DR with a proposal to merge, the directors deciding they preferred a merger with
11396-498: The aim of increasing speed and reliability, steam trains were replaced with electric and diesel traction and Diesel Multiple Units took over local passenger services on the line in February 1958. A proposal to close the line between Barnard Castle and Penrith was published at the end of 1959. Freight was diverted via Newcastle and Carlisle from July 1960 and, despite objections, the last train ran on 20 January 1962. The passenger service
11550-460: The boundary. Local passenger trains were withdrawn between Kirkby Stephen and Tebay on 1 December 1952, although steam-hauled summer Saturday services from the north-east to Blackpool continued to use the route until the end of the 1961 holiday season. The 1955 Modernisation Plan , known formally as the "Modernisation and Re-Equipment of the British Railways", was published in December 1954. With
11704-500: The branch to Middleton in Teesdale, and two a day between Kirkby Stephen and Tebay. There were four services a day between Bishop Auckland and Barnard Castle, three of which continued to Middleton in Teesdale. Britain's railways were nationalised on 1 January 1948 and the lines were placed under the control of British Railways . In the early 1950s control was divided between the North Eastern and London Midland regions with Kirkby Stephen as
11858-412: The cabs that were unpopular with the crews. Kirkby Stephen became a junction station when the EVR opened to mineral traffic on 8 April 1862 and passengers began to be carried on 9 June 1862. The line between West Auckland and Barnard Castle opened for minerals in July 1863 and passengers on 1 August 1863. In 1859 a company had been formed to link the Newcastle & Carlisle Railway with the S&DR via
12012-565: The collieries of Killingworth, to meet him in Darlington. On 12 May 1821 the shareholders appointed Thomas Meynell as chairman and Jonathan Backhouse as treasurer; a majority of the managing committee, which included Thomas Richardson , Edward Pease and his son Joseph Pease , were Quakers. The committee designed a seal, showing waggons being pulled by a horse, and adopted the Latin motto Periculum privatum utilitas publica ("At private risk for public service"). By 23 July 1821 it had decided that
12166-613: The collieries to Simpasture for forwarding to Port Clarence, rather than the lower shipping rate. By July 1834, the Exchequer Loan Commissioners had taken control of the Clarence Railway. The Croft branch opened in October 1829. Construction of the suspension bridge across the Tees started in July 1829, but was suspended in October after the Tees Navigation Company pointed out the S&DR had no permission to cross
12320-457: The commissioners' steam tugs arrived. The police then kept watch on the works until they were finished. Henry Pease , a S&DR director and Quaker, visited his brother Joseph in mid-1859 at his house by the sea at Marske-by-the-Sea . Returning late for dinner, he explained he had walked to Saltburn, then a group of fisherman's cottages, where he had had a "sort of prophetic vision" of a town with gardens. With other S&DR directors he planned
12474-507: The committee then made an experimental journey to Darlington before taking the locomotive and coach to Shildon in preparation for the opening day, with James Stephenson, George's elder brother, at the controls. On 27 September, between 7 am and 8 am, 12 waggons of coal were drawn up Etherley North Bank by a rope attached to the stationary engine at the top, and then let down the South Bank to St Helen's Auckland . A waggon of flour bags
12628-418: The contractors to the railway company sacrificed safety and durability to save costs. Sloppy work practices, such as poor casting of the metal, and the re-use of girders dropped into the estuary during construction, were factors in the bridge's collapse. The inquiry concluded that the bridge was "badly designed, badly built, and badly maintained". The entire "high girders" section, in which trains ran inside
12782-523: The detailed engineering of the Belah viaduct piers (and described the viaduct as one of the lightest and cheapest of the kind that had ever been erected.) Elsewhere, Bouch's forte was cheapness, and an ability to construct branch lines at a capital cost that might allow them to pay their way, especially if operated frugally (In 1854 Bouch advised the directors of the Peebles Railway that the company should work
12936-524: The east bank of the River Eden , a mile longer than a more expensive route on the west bank, and its act received royal assent on 21 May 1858. Bouch had laid out an economical route that followed the contours and avoided tunnels, but there were formidable gradients up to the 1,370-foot-high (420 m) Stainmore Summit . Land for two tracks was purchased, and a single track line was laid; valleys were crossed by viaducts, three made from wrought iron, including
13090-519: The easy district, and not on inferiority of the works. The line would be carried out in the most permanent and substantial manner possible. He made considerable use of lattice girder bridges, both with conventional masonry piers and with iron lattice piers; the most notable examples of the latter being on the Stainmore line: the Deepdale and Belah Viaducts . A contemporary treatise on iron bridges praised
13244-479: The estimates. By September 1825, the company had borrowed £60,000 in short-term loans and needed to start earning an income to ward off its creditors. A railway coach, named Experiment , arrived on the evening of 26 September 1825 and was attached to Locomotion No. 1 , which had been placed on the rails for the first time at Aycliffe Lane station following the completion of its journey by road from Newcastle earlier that same day. Pease, Stephenson and other members of
13398-581: The first Tay Rail Bridge while working for the North British Railway, and the official opening took place in May 1878. Queen Victoria travelled over it in late June 1879, and she awarded him a knighthood in recognition of his achievement. The bridge collapsed on 28 December 1879, in the Tay Bridge disaster , when it was hit by strong side winds. A train was travelling over it at the time, and 75 people died. The subsequent public inquiry revealed that
13552-447: The first track at St John's Well, the rails 4 ft 8 in ( 1,422 mm ) apart, the same gauge used by Stephenson on his Killingworth Railway . Stephenson advocated the use of steam locomotives on the line. Pease visited Killingworth in mid-1822 and the directors visited Hetton colliery railway , on which Stephenson had introduced steam locomotives. A new bill was presented, requesting Stephenson's deviations from
13706-411: The following year. Pease specified a formation wide enough for four tracks, so freight could be carried at 30 miles per hour (48 km/h) and passengers at 60 mph (97 km/h), and George Stephenson had drawn up detailed plans by November. The Act for the 34 + 1 ⁄ 2 miles (55.5 km) from Newcastle to Darlington was given royal assent on 4 July 1836, but little work had been done by
13860-541: The foreshore having been rejected. The jetty was also opposed by the Tees Conservancy Commissioners and they moored barges along the foreshore to obstruct construction. In what became known as the Battle of the Tees, a fight broke out when a steam tug sent by the commissioners interrupted men moving the barges. The barges were successfully moved, but a more serious fight developed the following night when three of
14014-403: The formal opening of the new dock took place on 12 May 1842. The S&DR provided most of the finance, and the dock was absorbed by the company in 1849. The GNER had authority for a railway from York to Newcastle; it opened to Darlington in 1841 having spent all of its authorised capital and could not start work on the extension to Newcastle. At the time Parliament was considering the route of
14168-481: The former S&DR line from Shildon to Simpasture Junction, joining the former Clarence Railway line to Carlton, where a later line allowed access to the Stockton to Middlesbrough extension. The locomotives operated for 20 years, but then coal traffic had reduced, which made it uneconomical to maintain the electrification system. As a result of the Railways Act 1921 , on 1 January 1923 the North Eastern Railway became
14322-524: The girders rather than on top of them, fell during the accident, taking the train with it. Analysis of the archives has shown that the design, which featured cast-iron columns with integral lugs holding the tie bars, was a critical mistake, because cast iron is brittle under tension. Many similar bridges had been built using cast-iron columns and wrought iron tie bars, but none used that particular design detail. Gustave Eiffel built many such bridges in France in
14476-473: The horse downhill, allowing it to rest while the train descended under gravity. The S&DR made their use compulsory from November 1828. Passenger traffic started on 10 October 1825, after the required licence was purchased, using the Experiment coach hauled by a horse. The coach was initially timetabled to travel from Stockton to Darlington in two hours, with a fare of 1s, and made a return journey four days
14630-481: The late 1850s from Durham to Bishop Auckland, but used a separate station in the town until December 1867, when all services began to use the S&DR station. The Sunniside Incline was replaced by a deviation, albeit with gradients of 1 in 51 and 1 in 52, which opened for mineral traffic on 10 April 1867 and for passengers on 2 March 1868; after 1868 trains on this line were extended to serve Benfieldside station (later known as Blackhill and then Consett ). In Cleveland,
14784-472: The line at: The S&DR worked traffic from the start, and initially two return services a day were provided between Redcar (except one early morning that started from Middlesbrough) and Tebay via Darlington. Two locomotives, No. 160 Brougham and No. 161 Lowther, had been built for the line in 1860 by Stephenson and Co. with a 4-4-0 wheel arrangement and enclosed cab. William Bouch designed four more that were made in 1862; these were similar but without
14938-702: The line have also been preserved as public footpaths by the Northern Viaduct Trust , who also care for Smardale Gill, Podgill and Merrygill viaducts which all survive. Another small section of the line, in close proximity to the current operating limits of the Stainmore Railway Company, has been converted into Waitby Greenriggs Nature Reserve , which is owned and operated by the Cumbria Wildlife Trust . Stockton and Darlington Railway The Stockton and Darlington Railway ( S&DR )
15092-456: The line in 1860 by Stephenson and Co, and the S&DR worked traffic from the start: two return services a day were provided for passengers. The EVR opened to mineral traffic on 8 April 1862 and passengers on 9 June 1862, to the south-facing junction at Clifton (later Clifton & Lowther ). The S&DR had presented a bill in 1861 to provide better connections for passengers on the WCML by extending
15246-472: The line opened on 22 July 1847, the Wear Valley Railway absorbed the Shildon Tunnel, Bishop Auckland & Weardale Railway, Weardale Extension Railway and Wear & Derwent Railway and then the S&DR leased the Wear Valley Railway and Middlesbrough & Redcar Railways for 999 years. This required a payment of £47,000 each year, exceeding the SD&R's net revenue; traffic from the Derwent Iron Company
15400-502: The line passing over his land. The railway was unopposed this time, but the bill nearly failed to enter the committee stage as the required four-fifths of shares had not been sold. Pease subscribed £7,000; from that time he had considerable influence over the railway and it became known as "the Quaker line". The Stockton and Darlington Railway Act 1821 ( 1 & 2 Geo. 4 . c. xliv), which received royal assent on 19 April 1821, allowed for
15554-514: The line themselves, as they could do so much more economically than a large undertaking.) Examples included branches to St Andrews , to Leven , and to Peebles , the Peebles line being described in his obituary as "long the pattern for cheap construction". This could leave over-optimistic clients with a railway designed and built to a price and not making enough money to support proper maintenance (and hence laying up problems for itself as an accident on
15708-651: The line up to Penrith , and to link up with the Cockermouth, Keswick and Penrith Railway to provide access for mineral traffic to Cumberland. The L&CR agreed to allow the S&DR running rights over its line and services were extended to Penrith from 1 August 1863. In 1854, there were five or six trains a day between Darlington and Redcar and three a day between Darlington and Frosterley. Travelling at average speeds of 19–24 miles per hour (31–39 km/h), passengers were charged from 1d per mile for third class to 2.2d per mile for first. Horses were still used on trains in
15862-408: The line would be a railway with edge rails, rather than a plateway , and appointed Stephenson to make a fresh survey of the line. Stephenson recommended using malleable iron rails, even though he owned a share of the patent for the alternative cast iron rails, and both types were used. Stephenson was assisted by his 18-year-old son Robert during the survey, and by the end of 1821 had reported that
16016-484: The locomotive started for Stockton, now hauling 31 vehicles with 550 passengers. On the 5 miles (8 km) of nearly level track east of Darlington the train struggled to reach more than 4 mph (6.4 km/h). At Eaglescliffe near Yarm crowds waited for the train to cross the Stockton to Yarm turnpike. Approaching Stockton, running alongside the turnpike as it skirted the western edge of Preston Park , it gained speed and reached 15 mph (24 km/h) again, before
16170-593: The mid-1850s: a horse-drawn coach was still independently operated between Middlesbrough and Stockton in 1854 on Sundays, as the only S&DR services that run on that day were the mail trains, and locomotives replaced horses on passenger trains to West Auckland in 1856. The S&DR opened a carriage works south of Darlington North Road station in 1853 and later it built a locomotive works nearby to replace its works at Shildon. Designed by William Bouch , who had taken over from Hackworth as Locomotive Supervisor in 1840, it completed its first locomotive in 1864. In 1858
16324-441: The modified road coaches were still in use, but there were also modern railway carriages, some first class with three compartments each seating eight passengers, and second class carriages that seated up to 40. Luggage and sometimes the guard travelled on the carriage roof; a passenger travelling third class suffered serious injuries after falling from the roof in 1840. Passenger trains averaged 22–25 mph (35–40 km/h), and
16478-507: The opening celebration on 18 June 1844, through services ran from London to Gateshead the following day. The N&DJR made an offer to lease the GNER and buy it within five years, and GNER shares increased in value by 44 per cent as the N&;DJR took over on 1 July 1845; the N&DJR became part of the larger York, Newcastle and Berwick Railway (YN&BR) in 1847. The Bishop Auckland & Weardale Railway (BA&WR) received permission in
16632-667: The original route and the use of "loco-motives or moveable engines", and this received royal assent on 23 May 1823 as the Stockton and Darlington Railway Act 1823 ( 4 Geo. 4 . c. xxxiii). The line included embankments up to 48 feet (15 m) high, and Stephenson designed an iron truss bridge to cross the River Gaunless . The Skerne Bridge over the River Skerne was designed by the Durham architect Ignatius Bonomi . In 1823, Stephenson and Pease opened Robert Stephenson and Company ,
16786-413: The price of coal dropped from 18 to 12 shillings , and by the beginning of 1827 was 8 shillings 6 pence (8s 6d). At first, the drivers had been paid a daily wage, but after February 1826 they were paid 1 ⁄ 4 d per ton per mile; from this they had to pay assistants and fireman and to buy coal for the locomotive. The 1821 act of Parliament had received opposition from the owners of collieries on
16940-419: The procession. The train stopped when the waggon carrying the company surveyors and engineers lost a wheel; the waggon was left behind and the train continued. The train stopped again, this time for 35 minutes to repair the locomotive and the train set off again, reaching 15 mph (24 km/h) before it was welcomed by an estimated 10,000 people as it came to a stop at the Darlington branch junction. Eight and
17094-524: The quay until 1848, when it was replaced by a station on the Middlesbrough line on the other side of the Tees. Before May 1829, Thomas Richardson had bought about 500 acres (200 ha) near Port Darlington, and with Joseph and Edward Pease and others he formed the Owners of the Middlesbrough Estate to develop it. Middlesbrough had only a few houses before the coming of the railway, but a year later had
17248-511: The railway, and the Quaker Edward Pease supported it at a public meeting in Darlington on 13 November 1818, promising a five per cent return on investment. Approximately two-thirds of the shares were sold locally, and the rest were bought by Quakers nationally. A private bill was presented to Parliament in March 1819, but as the route passed through Earl of Eldon 's estate and one of
17402-400: The remaining locomotives as soon as possible. In 1828, two locomotive boilers exploded within four months, both killing the driver and both due to the safety valves being left fixed down while the engine was stationary. Horses were also used on the line, and they could haul up to four waggons. The dandy waggon was introduced in mid-1828; it was a small cart at the end of the train that carried
17556-484: The return journey, the assisting locomotive then running light from the summit to Barnard Castle. Snow could a problem on the line, especially between the summit and Belah, and the line was closed by the weather in 1942, 1947 and 1955. As a result of the Railways Act 1921 , on 1 January 1923 the North Eastern Railway became part of the London and North Eastern Railway (LNER). Until 1932 there were three passenger trains
17710-515: The river and proposed that the railway delay application to Parliament, but, despite opposition, at a meeting in January 1828 it was decided to proceed. A more direct northerly route from Auckland to the Tees had been considered since 1819, and the Tees & Weardale Railway had applied unsuccessfully to Parliament for permission for such a line in 1823, 1824 and 1825. This now became a 11 + 1 ⁄ 2 -mile (18.5 km) line linking Simpasture on
17864-448: The route ran parallel to the S&DR alongside the Yarm to Stockton Road. The S&DR was originally on the east side of the road, but the LNR built its line with four tracks on the other side of the road, leasing two to the S&DR for a rental of 1s a year. On 25 January 1853, the LNR and SD&R opened a joint station at Eaglescliffe with an island platform between the tracks, and one side
18018-407: The same gauge as the S&DR. The route of the Clarence Railway was afterwards amended to reach Samphire Batts, later known as Port Clarence , and traffic started in August 1833; by the middle of 1834 Port Clarence had opened and 28 miles (45 km) of line was in use. The S&DR charged the 2 + 1 ⁄ 4 d per ton per mile landsale rate for coal it carried the 10 miles (16 km) from
18172-437: The saving using locomotives was 30 per cent. Young also showed that Pease and Richardson were both concerned about their investment in the Newcastle works and Pease unsuccessfully tried to sell his share to George Stephenson. New locomotives were ordered from Stephenson's, but the first was too heavy when it arrived in February 1828. It was rebuilt with six wheels and hailed as a great improvement, Hackworth being told to convert
18326-471: The section east of Annfield, and in the western section inclines were worked by stationary engines or gravity, with horses hauling waggons over level track. The lime kilns and the line between Stanhope and Carrhouse closed in 1840, and with the Stanhope to Annfield section losing money, the insolvent railway company was dissolved on 5 February 1841. The northern section became the Pontop and South Shields Railway and
18480-411: The size of ships was limited by the depth of the Tees. A branch from Stockton to Haverton, on the north bank of the Tees, was proposed in 1826, and the engineer Thomas Storey proposed a shorter and cheaper line to Middlesbrough , south of the Tees in July 1827. Later approved by George Stephenson, this plan was ratified by the shareholders on 26 October. The Tees Navigation Company was about to improve
18634-494: The southern section from Stanhope to Carrhouse was bought by the newly formed Derwent Iron Company at Consett, renamed the Wear & Derwent Railway , and used to transport limestone from quarries in the Stanhope area to its works at Consett. The Weardale Extension Railway ran from Waskerley on the Wear & Derwent to Crook on the BA&;WR and included the Sunniside Incline worked by
18788-420: The start, passengers were carried in coaches drawn by horses until carriages hauled by steam locomotives were introduced in 1833. The S&DR was involved in building the East Coast Main Line between York and Darlington, but its main expansion was at Middlesbrough Docks and west into Weardale and east to Redcar . It suffered severe financial difficulties at the end of the 1840s and was nearly taken over by
18942-448: The time he retired in 1832. When the treasurer Jonathan Backhouse retired in 1833 to become a Quaker minister, he was replaced by Joseph Pease. On 13 October 1835, the York and North Midland Railway (Y&NMR) was formed to connect York to London by a line to a junction with the planned North Midland Railway . Representatives of the Y&;NMR and S&DR met two weeks later and formed
19096-560: The time the 43 miles (69 km) from Croft to York received permission on 12 July the following year. In August a general meeting decided to start work on the southern section, but construction was delayed, and after several bridges collapsed the engineer Thomas Storey was replaced by Robert Stephenson. The S&DR sold its Croft branch to the GNER, and the railway opened for coal traffic on 4 January 1841 using S&DR locomotives. The railway opened to passengers with its own locomotives on 30 March. Between November 1841 and February 1842,
19250-429: The time was the largest railway company in the country and controlled the East Coast Main Line from Knottingley , south of York, through Darlington to Berwick-upon-Tweed . When they approached the S&DR with a proposal to merge, the S&DR deciding they preferred a merger with the NER than eventually become part of the LNWR, entered negotiations. Opposed by the NER, the Newcastle, Derwent & Weardale Railway bill
19404-479: The town, with gardens and Zetland Hotel by the station, and bought a house at 5 Britannia Terrace, where he stayed for a few weeks every summer. The extension opened in 1861, a station on the through line replacing the terminus at Redcar. A railway to serve Barnard Castle , from the S&DR at a junction near North Road station and along the River Tees, was proposed in 1852; this route bypassed as far as possible
19558-401: The track had been upgraded with rails weighing 64 lb/yd (32 kg/m). The railway had about 30 steam locomotives, most of them six coupled , that ran with four-wheeled tenders with two water butts, each capable of holding 600 imperial gallons (2,700 L; 720 US gal) of water. The line descended from Shildon to Stockton, assisting the trains that carried coal to the docks at
19712-472: The track. The brick and masonry piers from the old bridge were left as breakwaters for the new piers, which were monocoques of wrought iron and steel. Bouch's design for a suspension bridge to take a railway across the Firth of Forth , had been accepted and the foundation stone laid, but the project was cancelled following the Tay Bridge disaster . One of the piers still remains at the site. A different design,
19866-417: The traffic with 19 locomotives, but travelled at different speeds, so to help regulate traffic horse-drawn trains were required to operate in groups of four or five. This had led to horses, startled by a passing locomotive and coming off their dandy cart, being run down by the following train. On one occasion a driver fell asleep in the dandy cart of the preceding train and his horse, no longer being led, came to
20020-413: The train left carrying between 450 and 600 people, most travelling in empty waggons but some on top of waggons full of coal. Brakesmen were placed between the waggons, and the train set off, led by a man on horseback with a flag. It picked up speed on the gentle downward slope and reached 10 to 12 miles per hour (16 to 19 km/h), leaving behind men on field hunters (horses) who had tried to keep up with
20174-466: The unsuccessful Chittaprat to build the Royal George in the works at Shildon; it started work at the end of November. John Wesley Hackworth later published an account stating that locomotives would have been abandoned were it not for the fact that Pease and Thomas Richardson were partners with Stephenson in the Newcastle works, and that when Timothy Hackworth was commissioned to rebuild Chittaprat it
20328-403: The volume of imports and exports and work started in 1839 on Middlesbrough Dock, which had been laid out by William Cubitt , capable of holding 150 ships, and built by resident civil engineer George Turnbull . The suspension bridge across the Tees was replaced by a cast iron bridge on masonry piers in 1841. After three years and an expenditure of £122,000 (equivalent to £9.65m at 2011 prices),
20482-402: The waggons split into groups of four linked by a 9-yard-long (8.2 m) chain. For the opening ceremony on 27 December 1830, "Globe", a new locomotive designed by Hackworth for passenger trains, hauled people in carriages and waggons fitted with seats across the bridge to the staiths at Port Darlington, which had berths for six ships. Stockton continued to be served by a station on the line to
20636-593: The west coast in Cumberland and Lancashire . In the early 1850s, this ore was travelling the long way round over the Newcastle & Carlisle Railway to the Barrow-in-Furness area, and Durham coke was returning. Both the South Durham & Lancashire Union Railway (SD&LUR) and the Eden Valley Railway (EVR) companies were formed on 20 September 1856. Taking advantage of the new railway at Barnard Castle,
20790-542: The workers could be paid. By August 1827 the company had paid its debts and was able to raise more money; that month the Black Boy branch opened and construction began on the Croft and Hagger Leases branches. During 1827 shares rose from £120 at the start to £160 at the end. The line was initially used to carry coal to Darlington and Stockton, carrying 10,000 tons in the first three months and earning nearly £2,000. In Stockton,
20944-435: The world. Subsequently as a consulting engineer, he helped develop the caisson and popularised the use of lattice girders in railway bridges. He was knighted after the successful completion of the first Tay Railway Bridge , but his reputation was destroyed by the subsequent Tay Bridge disaster , in which 75 people are believed to have died as a result of defects in design, construction and maintenance, for all of which Bouch
21098-402: Was "as a last experiment" to "make an engine in his own way". Both Tomlinson and Rolt state this claim was unfounded and the company had shown earlier that locomotives were superior to horses, Tomlinson showing that coal was being moved using locomotives at half the cost of horses. Robert Young states that the company was unsure as to the real costs as they reported to shareholders in 1828 that
21252-536: Was a railway company that operated in north-east England from 1825 to 1863. The world's first public railway to use steam locomotives , its first line connected collieries near Shildon with Darlington and Stockton in County Durham, and was officially opened on 27 September 1825. The movement of coal to ships rapidly became a lucrative business, and the line was soon extended to a new port at Middlesbrough. While coal waggons were hauled by steam locomotives from
21406-415: Was approved by the House of Commons in 1861, although the line was eventually rejected by the House of Lords. The SD&LUR and EVR merged with the S&DR on 30 June 1862, and the S&DR and North Eastern Railway merged on 13 July 1863. Traffic increased rapidly and the line was doubled, starting with the section from Bowes to the summit at Stainmore in 1866, followed by the line from Barnard Castle to
21560-540: Was attached and horses hauled the train across the Gaunless Bridge to the bottom of Brusselton West Bank , where thousands watched the second stationary engine draw the train up the incline. The train was let down the East Bank to Mason's Arms Crossing at Shildon Lane End, where Locomotion No. 1 , Experiment and 21 new coal waggons fitted with seats were waiting. The directors had allowed room for 300 passengers, but
21714-733: Was for four years one of the Resident Engineers on the Stockton and Darlington Railway , leaving in 1849 to become manager and engineer of the Edinburgh and Northern Railway , one of the precursors of the North British Railway . He introduced the first roll-on roll-off train ferries in the world, across the Firth of Forth from Granton to Burntisland in Fife (3 February 1850.) Others had had similar ideas, but Bouch put them into effect, and did so with an attention to detail (such as design of
21868-410: Was given royal assent on 3 July 1854 and the railway opened on 8 July 1856. Both the South Durham & Lancashire Union Railway (SD&LUR) and the Eden Valley Railway (EVR) companies were formed on 20 September 1856. The SD&LUR route left the Stockton & Darlington Railway Haggerleases branch west of West Auckland, then crossed the Pennines to Tebay via Barnard Castle, Kirkby Stephen. The route
22022-498: Was held responsible. He died within 18 months of being knighted. Bouch's father (a retired sea-captain) kept the Ship Inn at Thursby and Thomas was educated locally (Thursby and then Carlisle) before at the age of 17 beginning his civil engineering career as assistant to one of the engineers constructing the Lancaster and Carlisle Railway . After a short spell working in Leeds (1844–45) he
22176-410: Was laid to ease the curve. At the end of the 19th century the line would be typically used by twenty freight trains, mostly mineral traffic. Westbound, 'double load' trains of 32 wagons would be assisted on the rising gradient by a locomotive at the rear. At the summit, where there was a reservoir to provide water, trains would be split into two for the descent. Up to 50 empty wagons could be managed on
22330-498: Was opened for freight on 23 May 1859 and for passenger traffic on 4 July 1859. The Middlesbrough & Redcar Railway , a short extension to Redcar, received permission on 21 July 1845 in the Middlesbrough and Redcar Railway Act 1845 ( 8 & 9 Vict. c. cxxvii). The line branched off before the Middlesbrough terminus, which was closed and a new through station opened with the line on 4 June 1846. Also authorised in July 1845, by
22484-434: Was presented unchanged to Parliament in 1842, and was opposed by the S&DR. Despite this, the Newcastle and Darlington Junction Railway Act 1842 ( 5 & 6 Vict. c. lxxx) received royal assent on 18 June 1842, and a second act of Parliament the following year, the Great North of England Railway Act 1843 ( 6 & 7 Vict. c. viii), secured the deviations from the GNER route in the south recommended by Stephenson. After
22638-406: Was proposed by George Dixon in 1767 and again by John Rennie in 1815, but both schemes failed. The harbour of Stockton-on-Tees invested considerably during the early 19th century in straightening the Tees in order to improve navigation on the river downstream of the town and was subsequently looking for ways to increase trade to recoup those costs. A few years later, a canal was proposed on
22792-533: Was reduced during a period of financial difficulty and the Black Boy colliery switched to sending its coal to Hartlepool. No dividend was paid in 1848 and the next few years; lease payments were made out of reserves. The S&DR announced a bill in November 1848 to permit a lease by and amalgamation with the YN&;BR, but this was withdrawn after the YN&BR share price crashed and its chairman Hudson resigned after questions were raised about his share dealings. In 1850
22946-542: Was single track with four passing loops each mile; square sleepers supported each rail separately so that horses could walk between them. Stone was used for the sleepers to the west of Darlington and oak to the east; Stephenson would have preferred all of them to have been stone, but the transport cost was too high as they were quarried in the Auckland area. The railway opened with the company owing money and unable to raise further loans; Pease advanced money twice early in 1826 so
23100-471: Was surveyed by Thomas Bouch and the company received permission on 13 July 1857. The EVR had a choice of following the east and west bank of the Eden and the cheaper route on the east bank was chosen even though it was a mile longer. An Act received Royal Assent on 21 May 1858, the line turning south as it joined the main line at Clifton on the insistence of the L&CR so it could not be used to bypass its allies,
23254-451: Was travelling the long way round via Newcastle and Carlisle from the Barrow-in-Furness area, and Durham coke was returning. A railway to serve Barnard Castle was proposed in 1852 that bypassed the Duke of Cleveland's estate, running from junction near North Road station and following the River Tees to Barnard Castle. An application in 1852 failed, but the 15 + 1 ⁄ 4 -mile (24.5 km) Darlington and Barnard Castle Railway Act 1854
23408-464: Was used by S&DR trains and the other by the LNR. Rather than allow trains to approach the platform line from either direction, the Board of Trade inspecting officer ruled that trains approaching on a line without a platform must first pass through and then reverse into the platform line. The Middlesbrough & Guisborough Railway, with two branches into the iron-rich hills, was approved by Parliament in
23562-466: Was withdrawn on 29 June 1953 and services north of Crook on 11 June 1956. Thomas Bouch Sir Thomas Bouch ( / ˈ b aʊ tʃ / ; 25 February 1822 – 30 October 1880) was a British railway engineer . He was born in Thursby , near Carlisle , Cumberland , and lived in Edinburgh . As manager of the Edinburgh and Northern Railway he introduced the first roll-on/roll-off train ferry service in
23716-637: Was withdrawn on the remaining section of the former SD&LUR between Bishop Auckland and Barnard Castle on 12 June 1962. In 1963 Dr Beeching published his report "The Reshaping of British Railways", which recommended closing the network's least used stations and lines. This listed the route Darlington–Barnard Castle–Middleton-in-Teesdale and the former Darlington and Barnard Castle Railway and Tees Valley Railway to Middleton in Teesdale closed to passengers on 30 November 1964 and completely on 5 April 1965. The Stainmore Railway Company , based at Kirkby Stephen East station, were formed in 2000. They have re-instated
#105894