71-500: RPB may refer to: Racing Plast Burträsk , Swedish company Rally for the People of Burundi Reverse path broadcast , a routing method similar to reverse path forwarding Reverse penhold backhand , a grip in table tennis RPB subunits of RNA polymerase , encoded by POL genes Topics referred to by the same term [REDACTED] This disambiguation page lists articles associated with
142-408: A 70% increase). Ten-inch (254 mm) wheels were specified, so new tyres had to be developed, the initial contract going to Dunlop . Issigonis went to Dunlop stating that he wanted even smaller, 8 in (203 mm) wheels (even though he had already settled on 10-inch). An agreement was made on the 10-inch size, after Dunlop rejected the eight-inch proposition. Many features were designed into
213-404: A brief hiatus, original Minis were built for four decades and sold during five, from the last year of the 1950s into the last year of the 20th century, over a single generation, as fastbacks, estates, and convertibles. The original Mini is considered an icon of 1960s British popular culture . Its space-saving transverse engine and front-wheel drive layout – allowing 80% of the area of
284-567: A catalytic converter and produce 45 kW (60 hp; 61 PS) at 5500 rpm. Power crept up to 46 kW (62 hp; 63 PS) at 5700 rpm for the fuel injected model. An internal bonnet release was fitted from 1992. By 1991, the Cooper represented forty percent of Mini sales in the home market; the main export market was Japan. Production ended in August 1996 as the Mark VII replaced it. In
355-449: A front rubber-mounted subframe with single tower bolts and the rear frame had some larger bushings introduced, all intended to improve the car's mechanical refinement and to reduce noise levels. Twin column stalks for indicators and wipers were introduced, as were larger foot pedals. From 1977 onwards, the rear light clusters included reversing lights. In July 1979 the lower end of the Mini range
426-518: A fuel tank from Renault 10 , hinges to the front and rear hood came from Renault 4 , door handles and locks from Renault 16 , door hinges and side windows (cut to size) from the Mini , the front screen from a 1967 Chevrolet Corvette , rear and front lights were Hella universal (although the same headlight units was also used in Saab 96 , Saab 99 and Renault 16 ). In 1970 the new laws for homebuilt street cars
497-514: A hatchback. The Metro was therefore in essence, the Mini mechanicals repackaged into a larger hatchback bodyshell. Although the Mini continued to be produced after the Metro's launch, production volumes were reduced as British Leyland and its successor Rover Group concentrated on the Metro as its key supermini. The original Mini's last year in the top ten of the UK's top selling cars was 1981, as it came ninth and
568-625: A large order for plastic products for the Swedish military and the car production plans were put on hold. The Finnish mold was sold after some 20 cars were made and later changed hand several times. The last known owner was Allan Sjöbacka in Vaasa and he tried to sell them. Mini The Mini (developed as ADO15 ) is a small, two-door, four-seat car produced by the British Motor Corporation (BMC) and its successors, from 1959 until 2000. Minus
639-512: A marque in its own right. The Morris version was known to all as "the Mini" or the "Morris Mini-Minor". This seems to have been a play on words: the Morris Minor was a larger, well known, and successful car that continued in production, and minor is Latin for "lesser", so an abbreviation of the Latin word for "least" – minimus – was used for the new even smaller car. One name proposed for
710-492: A rectangular centre from the Innocenti Mini hatchback. The 1100 Special and 850 City models were phased out by 1980, and during the same year the engine was upgraded to the improved A-Plus unit from the new Metro in 998cc form, which was now the only engine available in the Mini. This was then followed by a number of incremental developments. In 1978, the Mini was one of the key cars made available to disabled motorists under
781-420: A standard model with the same name. However this was the first time a UK-market 'round-nose' (i.e. non-Clubman) Mini had been available with the 1098cc engine, and the UK limited edition was also fitted with unique Exacton alloy wheels – the first time these were fitted to a factory-produced Mini – and plastic wheelarch extensions. Inside was the 1275GT's three-dial instrument cluster and a leather-rimmed wheel with
SECTION 10
#1732852222656852-453: A very small economy car. His initial work was on the largest car, designated XC9001, with the smallest car, XC9003, having the lowest priority despite it being Issigonis' greatest personal interest. With Lord's dictum to produce a bubble car competitor and his revised design requirements being laid down in October 1956, work on XC9001 stopped and XC9003 became the priority. In addition to Issigonis,
923-648: The Authi company from 1968 onwards, mostly under the Morris name. In 1969, a fibreglass version of the Mini Mark II was developed for British Leyland's Chilean subsidiary (British Leyland Automotores de Chile, S.A., originally the independent assembler EMSSA). The bodyshell mould was created by the Peel Engineering Company . Production began in 1970 and continued for a few years; these fibreglass Minis can be recognised by
994-563: The Ford GT40 and made for a Volkswagen Beetle chassis. It sold 40 kits in less than a year, but some customers found it difficult to assemble the cars. In 1969 the RPB-GT was introduced. Prices started at 3800 SEK. The design was similar to the Piraya, but had normal front hinged doors. The kit was made easier to assemble for the customer. The GT sold well, most as kits, but some as completed cars. It used
1065-399: The Mini name . Retrospectively, the car is known as the "Classic Mini" to distinguish it from the modern, BMW-influenced MINI family of vehicles produced since 2000. The Mini came about because of a fuel shortage caused by the 1956 Suez Crisis . Petrol was once again rationed in the UK, sales of large cars slumped, and the market for German bubble cars boomed, even in countries such as
1136-466: The 10-foot (3.0 m) length; and the engine, for reasons of cost, should be an existing unit. Alec Issigonis , who had been working for Alvis , had been recruited back to BMC in 1955 with a brief from Lord to design a range of technically advanced family cars in the same innovative spirit as his earlier Morris Minor to complement BMC's existing conventional models. Issigonis had set out design projects for three cars – large and small family cars and
1207-467: The ADO15's interior to maximise its passenger and luggage space on top of the major savings allowed by the transverse engine and 10-inch wheels. Sliding windows allowed single-skin doors to be fitted, improving elbow room and reducing costs. A bracing bar was fitted across the door frame to brace the single skin and this was later adapted into a large storage bin on each door. Issigonis later said that he had sized
1278-721: The Austin Partner (until 1964) and Morris Mascot (until 1981). It was introduced in Australia as Morris 850 only (not "Austin"), and then later as Morris Cooper and Morris Cooper S versions, as well. The Morris name Mini (Mini-Minor) was first used for Austin's version by BMC in 1961 when the Austin Seven was rebranded as the Austin Mini, somewhat to the surprise of the Sharp's Commercials car company (later known as Bond Cars), who had been using
1349-554: The BMC must have been losing around £30 per car, so decided to produce a larger car – the Cortina , launched in 1962 – as its competitor in the budget market. BMC insisted that the way company overheads were shared out, the Mini always made money. Larger profits came from the popular De Luxe models and from optional extras such as seat belts, door mirrors, a heater, and a radio, which would be considered necessities on modern cars, as well as
1420-508: The City was the new 850 SDL (Super Deluxe), which had the same specification as the standard Mini 1000 but with the smaller engine. For August 1979 the Mini's 20th anniversary was marked by the introduction of the first true limited-edition Mini, which was the Mini 1100 Special. This was a 5,000-car run with the 1098cc engine, broadly to the specification already in production for the European market as
1491-516: The Clubman). The most obvious changes were larger doors with concealed hinges. Customer demand led to the sliding windows being replaced with winding windows, although all Australian-manufactured Mark I Minis had adopted this feature in 1965 (with opening quarterlight windows). The suspension reverted from hydrolastic to rubber cones as a cost-saving measure. (The 1275 GT and Clubman retained the hydrolastic system until June 1971, when they, too, switched to
SECTION 20
#17328522226561562-535: The Metro was fifth. The arrival of the Metro also had production of the larger Allegro pruned back before it was finally discontinued in 1982. In 1982, BL made 56,297 Minis and over 175,000 Metros. Due to their common powertrain package, the Mini received many mechanical upgrades in the early 1980s which were shared with the Metro, such as the A-Plus engine , 12-inch wheels with front disc brakes, improved soundproofing and quieter, stronger transmissions. This not only modernised
1633-661: The Mini was produced by Innocenti in Milan and it was sold under the "Innocenti Mini" marque. Innocenti was also producing Lambretta scooters at that time. The Mini Mark I had three major UK updates: the Mark II, the Clubman, and the Mark III. Within these was a series of variations, including an estate car , a pick-up , a van, and the Mini Moke , a jeep -like buggy. The performance versions,
1704-661: The Mini Cooper and Cooper "S", were successful as both race and rally cars , winning the Monte Carlo Rally in 1964, 1965, and 1967. In 1966, the first-placed Mini (along with nine other cars) was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. In August 1959, the Mini was marketed under the Austin and Morris names, as the Austin Seven and Morris Mini-Minor. The Austin Seven
1775-423: The Mini but, because many of its major subassemblies were now shared with the Metro, made it very cost-effective to produce despite falling sales volumes. All cars had 8.4-inch (210 mm) brake discs and plastic wheel arches (Mini Special arches), but retained the same Mark IV body shell shape. The Mini's 25th anniversary fell in 1984 and British Leyland produced a 'Mini 25' limited-edition model, both to mark
1846-604: The Mini continually popular as a first car for younger drivers, and Austin-Rover introduced a steady stream of limited editions with bright paint colours, body graphics, and trim to appeal to this market. The Mini was also becoming prized as a characterful and nostalgic car in its own right, and the London Collection of limited-edition models was more upmarket and luxurious and named after affluent or fashionable parts of London. These marketing strategies proved very successful; Mini production actually had modest increases through
1917-523: The Mini platform. Bertone also created a Mini Cooper equivalent, christened the Innocenti De Tomaso , that sported a 1275-cc engine similar to the MG Metro engine, but with an 11-stud head, a special inlet manifold, and used the "A" clutch instead of the "Verto" type. It also used homokinetic shafts instead of rubber couplings. The Mini was still popular in the UK, but appeared increasingly outdated in
1988-474: The United Kingdom, where imported cars were still a rarity. Leonard Lord , the head of BMC, reportedly detested these cars so much that he vowed to rid the streets of them and design a 'proper miniature car'. He laid down some basic design requirements – the car should be contained within a box that measured 10×4×4 feet (3.0×1.2×1.2 m); and the passenger accommodation should occupy 6 feet (1.8 m) of
2059-633: The almost identical Austin version was Austin Newmarket, but it was sold as the Austin Seven (sometimes written as SE7EN in early publicity material – with the '7' using the letter V rotated anticlockwise so it approximated the number 7), which recalled the popular small Austin 7 of the 1920s and 1930s. Until 1962, the cars appeared in North America and France as the Austin 850 and Morris 850, and in Denmark as
2130-419: The bins to carry the ingredients of his favourite drink, a dry martini in the correct proportions (one bottle of vermouth and 2 of Gordon's Gin ). Similar bins were provided outboard of the rear seats, also serving a dual function of bracing the single-skin body panel. Small items could also be stowed under the rear seats, and early Minis were sold with optional wicker baskets specially shaped to slot under
2201-452: The cabin space, and required no maintenance. The conical shape gave the springs a progressive action, becoming stiffer at greater degrees of compression. This gave the ADO15 a smooth ride over small bumps, but minimised roll and pitch on more uneven surfaces. It also allowed the springs to cope with the huge variance in load between an unladen car (about 600 kg or 1300 lb) and a fully laden one (just over 1000 kg or 2240 lb, or
RPB - Misplaced Pages Continue
2272-566: The car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999, the Mini was voted the second-most influential car of the 20th century , behind the Ford Model T , and ahead of the Citroën DS and Volkswagen Beetle . The front-wheel-drive, transverse-engine layout were used in many other "supermini" style car designs such as Honda N360 (1967), Nissan Cherry (1970), and Fiat 127 (1971). The layout
2343-571: The delivered cars, but with desedigned rear and a 5 cm higher roof, and continued production for some years. RPB withdrew from car making and instead produced other plastic products such as bus interiors and snowmobile parts. In 1982 the law for amateur built cars changed so home built cars again could be made road legal. RPB decided to restart production with an updated model of the GT model. Some cars were built and showed on various exhibitions. They were well received both by media and public. But then RPB got
2414-461: The design and production of the Mini. The Mini shape had become so well known that by the 1990s, Rover Group – the heirs to BMC – were able to register its design as a trademark in its own right. The production version of the Mini was demonstrated to the press in April 1959, and by August, several thousand cars had been produced ready for the first sales. The Mini was officially announced to
2485-407: The disadvantage of feeding the radiator with air that had been heated by passing over the engine. It also exposed the entire ignition system to the direct entry of rainwater through the grille. Early prototypes used the existing 948-cc A-Series unit, but this provided the ADO15 with performance far greater than its price and purpose required – a top speed of about 80 mph (129 km/h). The engine
2556-554: The driver Bror Jaktlund managed to finished as number 3 in the European championship, even if a crash forced him to skip the last race. A second Super Formula Vee car was made in 1973 and was in use until it was sold in 1976. It then changed hands several times to owners in Sweden, Denmark and England until it came back to Sweden in late 2002. In 1968 the RPB Piraya was introduced. It was a low, two seated kit car with gullwing-doors inspired by
2627-471: The drivetrain and suspension for the front and rear. This also simplified production, as both subframes could be built up independently and then mated to the already-completed bodyshell. It also opened up the possibility of easily producing variants on the ADO15 as a body of any shape or design could be used provided it could accommodate the subframes. In 1959, BMC and Alec Issigonis won the Dewar Trophy , for
2698-429: The engine-oil lubricated, four-speed transmission in the sump , and by employing front-wheel drive . Drive was taken down to the transmission via a conventional clutch coupled to a set of primary gears on the end of the crankshaft which gave rise to the characteristic transmission "whine" for which the Mini became famous. Almost all small front-wheel drive cars developed since have used a similar configuration, except with
2769-423: The face of newer and more practical rivals. Since the late 1960s, plans had been in place for a newer and more practical supermini to replace it, though the Mini was still the only car of this size built by British Leyland for the home market. The Mark IV was introduced in 1976, though by this stage British Leyland was working on a new small car which was widely expected to replace the Mini before much longer. It had
2840-515: The front seat occupants . To further simplify construction, the hinges for the doors and boot lid were mounted externally. This also saved a small amount of cabin space. It also made the ADO15 very easy to assemble from complete knock-down kits in overseas markets with only basic industry. Cars could be assembled with minimal use of jigs as the external seams made the panels largely 'self-aligning'. They also allowed panels to be stacked flat on top of one other for easy shipping. As originally built, all
2911-412: The layouts). Together, by July 1957, they had designed and built the original XC9003 prototype, which was affectionately named the "Orange Box" because of its colour. Leonard Lord approved the car for production on 19 July and XC9003 became project ADO15 . The ADO15 used a conventional BMC A-Series four-cylinder, water-cooled engine, but departed from tradition by mounting it transversely , with
RPB - Misplaced Pages Continue
2982-399: The mechanically interconnected Citroën 2CV suspension at that time (according to an interview by Moulton with Car Magazine in the late 1990s), which inspired the design of the hydrolastic suspension system for the Mini and Morris/Austin 1100, to try to keep the benefits of the 2CV system (ride comfort, body levelling, keeping the roadwheel under good control and the tyres in contact with
3053-599: The mid-1980s, from 34,974 Minis in 1984 to 35,280 in 1985 and 39,800 in 1986. In 1990, the Mini Cooper was relaunched - 20 years after the demise of the original model - which saw Mini production pass 40,000. Once again, it featured the long-running 1275-cc engine which had featured on the original Mini Cooper S. In 1988, Austin Rover decided to keep the Mini in production for as long as it was viable to do so, putting an end to reports that it would be discontinued by 1991, by which time
3124-460: The missing body seams and by larger panel gaps. The Chilean market was never very large and the Arica plant was closed in 1974. The reason for the fibreglass body was to enable Leyland to meet very strict requirements for local sourcing, increasing to 70.22% in 1971. The Mark III Mini had a modified bodyshell with enough alterations to see the factory code change from ADO15 to ADO20 (which it shared with
3195-414: The name Minicar for their three-wheeled vehicles since 1949. However, legal action was somehow averted, and BMC used the name "Mini" thereafter. In 1964, the suspension of the cars was replaced by another Moulton design, the hydrolastic system. The new suspension gave a softer ride, but it also increased weight and production cost. In 1971, the original rubber suspension reappeared and was retained for
3266-718: The new Motability scheme. Reports of the Mini's imminent demise surfaced again in 1980 with the launch of the Austin Mini-Metro (badging with the word "mini" in all lowercase). Faced with competition from a new wave of modern superminis like the Ford Fiesta , Renault 5 , and Volkswagen Polo , the Mini was beginning to fall out of favour in many export markets, with the South African, Australian, and New Zealand markets all stopping production around this time. Buyers of small cars now wanted modern and practical designs, usually with
3337-516: The occasion and to publicise the recent upgrades to the model. This marked the start of a turnaround in the Mini's fortunes. Basic models such as the City and the City E (using the economy-tuned drivetrain from the Metro HLE) filled in the bottom of the Austin-Rover range and still found buyers who wanted a compact city car that was easy to park and cheap to run. Low purchase and running costs also made
3408-625: The original Metro would also be replaced. With the larger Metro being redesigned in 1990 to take the new K-Series engine, the Mini became the sole recipient of the classic A-Series engine with transmission-in-sump layout. The engine mounting points were moved forward to take 1275-cc power units, and includes the later Horizontal Integral Float version of the SU carb , and also the single-point fuel-injection version, which came out in November 1991. The 998-cc power units were discontinued. Early, carburetted Coopers had
3479-460: The original shelf, internal bonnet release. Introduction of airbag on driver's side. The basic Mini was the 1.3i, the other model in the range being the Mini Cooper. The end of production in October 2000 not only signalled the end of original Mini production after 41 years, but also brought about the demise of the 1275-cc engine which had powered the Mini and numerous other BL/BMC/ARG cars for more than 35 years. The Metro had ceased production two and
3550-718: The public on 26 August 1959. Some 2,000 cars had already been sent abroad and were displayed that day in almost 100 countries. The key dimensions were: The first example, a Morris Mini-Minor with the registration 621 AOK, is on display at the Heritage Motor Centre in Warwickshire. Another early example from 1959 is on display at the National Motor Museum in Hampshire . The Mini was marketed under BMC's two main brand names, Austin and Morris, until 1969, when it became
3621-495: The remaining life of the Mini. From October 1965, the option of the unique Automotive Products designed four-speed automatic transmission became available. Cars fitted with this became the Mini-Matic. Slow at the outset, Mark I sales strengthened across most of the model lines in the 1960s, and production totalled 1,190,000. Ford purchased a Mini and dismantled it to see if they could offer an alternative. Ford determined that
SECTION 50
#17328522226563692-519: The road), but with added roll stiffness that the 2CV lacked. The short development time of the car meant this was not ready in time for the Mini's launch. The system intended for the Mini was further developed and the hydrolastic system was first used on the Morris 1100 , launched in 1962; the Mini gained the system later in 1964. As launched, the Mini had simpler suspension made from conical springs of solid rubber. These were compact, saving on intrusion into
3763-494: The rubber cone suspension of the original Minis. ) In 1969, the simple name Mini completely replaced the separate Austin and Morris brands. In April 1974, a heater became standard equipment on the entry-level Mini 850, as well, having by then already been included in the standard specification of the other models for some time. In the late 1970s, Innocenti introduced the Innocenti 90 and 120 , Bertone -designed hatchbacks based on
3834-404: The rubber cone system gave a raw and bumpy ride accentuated by the woven-webbing seats, but the rigidity of the rubber cones, together with the wheels' positioning at the corners of the car, gave the Mini go kart -like handling. Initially, an interconnected fluid system was planned, similar to the one that Alec Issigonis and Alex Moulton were working on in the mid-1950s at Alvis. They had assessed
3905-406: The seats. The fixed rear parcel shelf contributed to the rigidity of the body shell, although it did preclude fitting the ADO15 with a hatchback . The boot lid was hinged at the bottom so that the car could be driven with it open to increase luggage space. On early cars, the number plate , together with its light, was hinged at the top so that it could swing down to remain visible when the boot lid
3976-421: The structural body panels were welded to the top of the single floor pressing, but this caused major problems with water entering the cabin and was quickly changed in the first months of production. Early prototypes were fully unitary in construction, but the cars broke apart under the high loads from the large lever ratios used with the rubber cone suspension. The design was changed to use steel subframes to carry
4047-558: The summer of 1991, 21 years after the fibreglass Mini built in Chile was produced, another fibreglass bodied Mini again entered production, this time in Venezuela. The producer, Facorca, intended to sell the car in the Caribbean and Central America, and also had plans for Brazilian assembly. This was the final version, twin point injection with front-mounted radiator. Full-width dashboard replaces
4118-455: The team that developed the Mini included John Sheppard (who had worked with Issigonis at Alvis), Jack Daniels (who had worked with Issigonis on the Morris Minor), Chris Kingham (also from Alvis), Charles Griffin (from Cowley), Vic Everton (from the body—jig shop), Ron Dovey (who built the bodies), Dick Gallimore (who laid out the experimental bodies), and George Cooper (whose job was to check
4189-481: The title RPB . If an internal link led you here, you may wish to change the link to point directly to the intended article. Retrieved from " https://en.wikipedia.org/w/index.php?title=RPB&oldid=1179857655 " Category : Disambiguation pages Hidden categories: Short description is different from Wikidata All article disambiguation pages All disambiguation pages Racing Plast Burtr%C3%A4sk Racing Plast Burträsk (RPB)
4260-408: The transmission separately enclosed rather than using the engine oil and mounted directly onto the end of the crankshaft, but with unequal length driveshafts. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so that it blew air into the natural low pressure area under the front wing. This location saved vehicle length, but had
4331-570: The various Cooper and Cooper S models. The Mini entered into popular culture in the 1960s with well-publicised purchases by film and music stars. The Cooper S version was also used by some British police forces as both a uniform and plainclothes car. The Mark II Mini was launched at the 1967 British Motor Show , and featured a redesigned grille, a larger rear window and numerous cosmetic changes. A total of 429,000 Mk II Minis were produced. A variety of Mini types were made in Pamplona , Spain, by
SECTION 60
#17328522226564402-539: Was a Swedish company in Burträsk that made racing cars and kit cars . It was founded in 1965 by Kjell Lindskog. Starting in 1966 the company produced two Formula Vee cars, Broke that was a copy of the American Beach Car and Dolling FVe that was a design by Willy Dolling. The Dolling was made in three versions between 1966 and 1967, in total 52 cars were built. In 1967 RPB started making their own Formula Vee car. It
4473-856: Was also adapted for larger subcompact designs. This distinctive two-door car was designed for BMC by Sir Alec Issigonis . It was manufactured at the Longbridge plant in Birmingham, England located next to BMC's headquarters and at the former Morris Motors plant at Cowley near Oxford, in the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney , Australia, and later also in Spain ( Authi ), Belgium, Italy ( Innocenti ), Chile, Malta, Portugal, South Africa, Uruguay, Venezuela, and Yugoslavia ( IMV ). The Italian version of
4544-491: Was altered. The basic Mini 850 (which had featured in various forms since the original launch 20 years before) was withdrawn. Its place was taken by two models at slightly lower and slightly higher price points. The new base model was the Mini City, with black-painted bumpers, an untrimmed lower facia rail, part-fabric seats and wing mirror and sun visor only on the driver's side, plus unique 'City' body graphics and boot badge. Above
4615-404: Was better than many other economy cars of the time. The suspension system, designed by Issigonis's friend Alex Moulton at Moulton Developments Limited , used compact rubber cones instead of conventional springs. This space-saving design also featured rising progressive-rate springing of the cones, and provided some natural damping, in addition to the normal dampers. Built into the subframes,
4686-500: Was changed and required a mandatory crash test making kit cars virtually impossible to get street legal. Production for export, mostly to Finland and Norway, continued for a while. In May 1971 a fire destroyed the factory and the molds and it was not possible to restart production. The dealer in Finland had orders for more cars so he bought the rights to the RPB GT and made new molds from one of
4757-507: Was open. This feature was later discontinued after it was discovered that exhaust gases could leak into the cockpit when the boot was open. The Mini was designed as a monocoque shell with welded seams visible on the outside of the car running down the A and C pillars , and between the body and the floor pan. Those that ran from the base of the A-pillar to the wheel well were described as 'everted' (lit., 'turned outward') to provide more room for
4828-486: Was reduced to a new 848-cc capacity with a shorter stroke . This reduced power from 37 to 33 bhp and caused a significant drop in torque , so provided more realistic performance, especially when the ADO15 body was widened by 2 inches (5.08 cm) over the XC9003 prototype, which blunted the car's top speed while improving its stability and roadholding. Even so, the ADO15 had a top speed of 75 mph (121 km/h), which
4899-503: Was renamed Austin Mini in January 1962 and Mini became a marque in its own right in 1969. In 1980, it once again became the Austin Mini, and in 1988, just "Mini" (although the "Rover" badge was applied on some models exported to Japan). BMW acquired the Rover Group (formerly British Leyland ) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using
4970-586: Was simple to make and inexpensive. It sold well and did well in races. In 1968 the chassis was improved to make it more rigid and give it a more adjustable rear axle design. In 1969 the car was redesigned again, this time to increase performance, but only six were made due to rumours about changes in the Formula Vee rules. In 1970 the new rules came and they allowed a more wedge like shape and a longer and narrower car. 13-15 cars were made. The RPB cars were very successful and they won 14 out of 18 competitions. One of them
5041-412: Was still winning races in 1978. The same model continued to be built in 1971 and 1972, but only in small numbers. In 1971 RPB cars made 22 European track records. In 1971 a Formula Super Vee car was made. This time using a monocoque chassis. The prototype car did well in races, but was plagued with engine problems and the rear end of the chassis had to be redesigned. After the redesign it worked better and
#655344