128-458: The Midland Pullman was the name given to a former express passenger train service operating on British Railways ' old Midland Main Line between London St Pancras and Manchester Central via Leicester and Millers Dale . The train completed the journey in 3 hours 15 minutes. This service is not to be confused with the first Midland Railway Pullman coach introduced in 1874, named "Midland" which
256-650: A Scottish inventor, built a small-scale prototype of a steam road locomotive in Birmingham . A full-scale rail steam locomotive was proposed by William Reynolds around 1787. An early working model of a steam rail locomotive was designed and constructed by steamboat pioneer John Fitch in the US during 1794. Some sources claim Fitch's model was operable already by the 1780s and that he demonstrated his locomotive to George Washington . His steam locomotive used interior bladed wheels guided by rails or tracks. The model still exists at
384-461: A " Whites only " recruitment policy for guards at Euston station agreed between the local union branch and station management was dropped after the case of Asquith Xavier , a migrant from Dominica , who had been refused promotion on those grounds, was raised in Parliament and taken up by the then Secretary of State for Transport, Barbara Castle . Passenger levels decreased steadily from 1962 to
512-521: A "network for development"; the fate of the rest of the network was not discussed in the report. The basis for calculating passenger fares changed in 1964. In future, fares on some routes—such as rural, holiday and commuter services—would be set at a higher level than on other routes; previously, fares had been calculated using a simple rate for the distance travelled, which at the time was 3 d per mile second class, and 4½d per mile first class (equivalent to £0.32 and £0.48 respectively, in 2023 ). In 1966,
640-635: A (newly identified) Killingworth Billy in 1816. He also constructed The Duke in 1817 for the Kilmarnock and Troon Railway , which was the first steam locomotive to work in Scotland. In 1825, Stephenson built Locomotion No. 1 for the Stockton and Darlington Railway , north-east England, which was the first public steam railway in the world. In 1829, his son Robert built in Newcastle The Rocket , which
768-479: A Corporate Identity Manual which established a coherent brand and design standard for the whole organisation, specifying Rail Blue and pearl grey as the standard colour scheme for all rolling stock; Rail Alphabet as the standard corporate typeface, designed by Jock Kinneir and Margaret Calvert ; and introducing the now-iconic corporate Identity Symbol of the Double Arrow logo. Designed by Gerald Barney (also of
896-448: A balance has to be struck between obtaining sufficient draught for combustion whilst giving the exhaust gases and particles sufficient time to be consumed. In the past, a strong draught could lift the fire off the grate, or cause the ejection of unburnt particles of fuel, dirt and pollution for which steam locomotives had an unenviable reputation. Moreover, the pumping action of the exhaust has the counter-effect of exerting back pressure on
1024-411: A committee chaired by Sir David Serpell was published in 1983. The Serpell Report made no recommendations as such but did set out various options for the network, including, at their most extreme, a skeletal system of less than 2,000 route km (1,240 miles). The report was received with hostility within several circles, which included figures within the government, as well as amongst
1152-483: A crankpin on the driving wheel ( Main driver in the US) or to a crank on a driving axle. The movement of the valves in the steam chest is controlled through a set of rods and linkages called the valve gear , actuated from the driving axle or from the crankpin; the valve gear includes devices that allow reversing the engine, adjusting valve travel and the timing of the admission and exhaust events. The cut-off point determines
1280-429: A gauge mounted in the cab. Steam pressure can be released manually by the driver or fireman. If the pressure reaches the boiler's design working limit, a safety valve opens automatically to reduce the pressure and avoid a catastrophic accident. The exhaust steam from the engine cylinders shoots out of a nozzle pointing up the chimney in the smokebox. The steam entrains or drags the smokebox gases with it which maintains
1408-437: A grander logo for the railways. BR's second corporate logo (1956–1965), designed in consultation with Charles Franklyn and inspired by the much more detailed BTC crest, depicted a rampant lion emerging from a heraldic crown and holding a spoked wheel, all enclosed in a roundel with the "British Railways" name displayed across a bar on either side. This emblem soon acquired the nickname of the "Ferret and Dartboard". A variant of
SECTION 10
#17328553297771536-414: A lack of standardisation. At the same time, containerised freight was being developed. The marshalling yard building programme was a failure, being based on a belief in the continued viability of wagon-load traffic in the face of increasingly effective road competition, and lacking effective forward planning or realistic assessments of future freight. A 2002 documentary broadcast on BBC Radio 4 blamed
1664-481: A lower pressure in the smokebox than that under the firebox grate. This pressure difference causes air to flow up through the coal bed and keeps the fire burning. The search for thermal efficiency greater than that of a typical fire-tube boiler led engineers, such as Nigel Gresley , to consider the water-tube boiler . Although he tested the concept on the LNER Class W1 , the difficulties during development exceeded
1792-433: A lower reciprocating mass than three, four, five or six coupled axles. They were thus able to turn at very high speeds due to the lower reciprocating mass. A trailing axle was able to support a huge firebox, hence most locomotives with the wheel arrangement of 4-4-2 (American Type Atlantic) were called free steamers and were able to maintain steam pressure regardless of throttle setting. The chassis, or locomotive frame ,
1920-630: A number of Swiss steam shunting locomotives were modified to use electrically heated boilers, consuming around 480 kW of power collected from an overhead line with a pantograph . These locomotives were significantly less efficient than electric ones ; they were used because Switzerland was suffering a coal shortage because of the War, but had access to plentiful hydroelectricity . A number of tourist lines and heritage locomotives in Switzerland, Argentina and Australia have used light diesel-type oil. Water
2048-456: A number of important innovations that included using high-pressure steam which reduced the weight of the engine and increased its efficiency. Trevithick visited the Newcastle area in 1804 and had a ready audience of colliery (coal mine) owners and engineers. The visit was so successful that the colliery railways in north-east England became the leading centre for experimentation and development of
2176-470: A platform of revising many of the cuts, Tom Fraser instead authorised the closure 1,071 mi of railway lines, following the recommendations from the Beeching Report even lines not considered closing. After he resigned in 1967, his replacement Barbara Castle continued the line and station closures but introduced the first Government rail subsidies for socially necessary but unprofitable railways in
2304-722: A private heritage railway. Other preserved lines, or heritage railways , have reopened lines previously closed by British Rail. These range from picturesque rural branch lines like the Keighley and Worth Valley Railway to sections of mainline such as the Great Central Railway . Many have links to the National Rail network, both at station interchanges, for example, the Severn Valley Railway between Kidderminster and Kidderminster Town , and physical rail connections like
2432-525: A programme of closures began almost immediately after nationalisation. However, the general financial position of BR became gradually poorer until an operating loss was recorded in 1955. The Executive itself had been abolished in 1953 by the Conservative government, and control of BR transferred to the parent Commission. Other changes to the British Transport Commission at the same time included
2560-459: A rigid frame with a 30% weight reduction. Generally, the largest locomotives are permanently coupled to a tender that carries the water and fuel. Often, locomotives working shorter distances do not have a tender and carry the fuel in a bunker, with the water carried in tanks placed next to the boiler. The tanks can be in various configurations, including two tanks alongside ( side tanks or pannier tanks ), one on top ( saddle tank ) or one between
2688-401: A tank in the locomotive tender or wrapped around the boiler in the case of a tank locomotive . Periodic stops are required to refill the tanks; an alternative was a scoop installed under the tender that collected water as the train passed over a track pan located between the rails. While the locomotive is producing steam, the amount of water in the boiler is constantly monitored by looking at
SECTION 20
#17328553297772816-468: A working railway, in 1948 the line was principally a tourist attraction . British Rail operated the line using steam locomotives long after the withdrawal of standard-gauge steam. The line's three steam locomotives were the only ones to receive TOPS serial numbers and be painted in BR Rail Blue livery with the double arrow logo. The Vale of Rheidol Railway was privatised in 1989 and continues to operate as
2944-533: A year later when the BTC was abolished the name of the force was amended to the British Transport Police. This name and its role within policing on the rail network was continued post-1994. Despite its nationalisation in 1947 "as one of the 'commanding heights' of the economy", according to some sources British Rail was not profitable for most (if not all) of its history. Newspapers reported that as recently as
3072-475: Is crucial to the efficiency of any steam locomotive, and the internal profiles of the chimney (or, strictly speaking, the ejector ) require careful design and adjustment. This has been the object of intensive studies by a number of engineers (and often ignored by others, sometimes with catastrophic consequences). The fact that the draught depends on the exhaust pressure means that power delivery and power generation are automatically self-adjusting. Among other things,
3200-419: Is directed upwards out of the locomotive through the chimney, by way of a nozzle called a blastpipe , creating the familiar "chuffing" sound of the steam locomotive. The blastpipe is placed at a strategic point inside the smokebox that is at the same time traversed by the combustion gases drawn through the boiler and grate by the action of the steam blast. The combining of the two streams, steam and exhaust gases,
3328-470: Is fuelled by burning combustible material (usually coal , oil or, rarely, wood ) to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels. In most locomotives, the steam is admitted alternately to each end of its cylinders in which pistons are mechanically connected to the locomotive's main wheels. Fuel and water supplies are usually carried with
3456-415: Is the principal structure onto which the boiler is mounted and which incorporates the various elements of the running gear. The boiler is rigidly mounted on a "saddle" beneath the smokebox and in front of the boiler barrel, but the firebox at the rear is allowed to slide forward and backwards, to allow for expansion when hot. European locomotives usually use "plate frames", where two vertical flat plates form
3584-665: The Beeching cuts . Trunk routes were considered to be the most important, and so electrification of the Great Eastern Main Line from London to Norwich was completed between 1976 and 1986 and on the East Coast Main Line from London to Edinburgh between 1985 and 1990. Train manufacturer British Rail Engineering Limited (BREL) produced the capable InterCity 125 and Sprinter sets, the introduction of which improved intercity and regional railways, respectively, as well as
3712-526: The Big Four British railway companies along with some other (but not all) smaller railways. Profitability of the railways became a pressing concern during the 1950s, leading to multiple efforts to bolster performance, including some line closures. The 1955 Modernisation Plan formally directed a process of dieselisation and electrification to take place; accordingly, steam locomotives had been entirely replaced by diesel and electric traction (except for
3840-874: The Drache , was delivered in 1848. The first steam locomotives operating in Italy were the Bayard and the Vesuvio , running on the Napoli-Portici line, in the Kingdom of the Two Sicilies. The first railway line over Swiss territory was the Strasbourg – Basel line opened in 1844. Three years later, in 1847, the first fully Swiss railway line, the Spanisch Brötli Bahn , from Zürich to Baden
3968-664: The London and North Eastern Railway (LNER) and the Southern Railway (SR). During World War I , the railways were under state control, which continued until 1921. Complete nationalisation had been considered, and the Railways Act 1921 is sometimes considered as a precursor to that, but the concept was rejected. Nationalisation was subsequently carried out after World War II , under the Transport Act 1947 . This Act made provision for
Midland Pullman - Misplaced Pages Continue
4096-574: The Ohio Historical Society Museum in Columbus, US. The authenticity and date of this locomotive is disputed by some experts and a workable steam train would have to await the invention of the high-pressure steam engine by Richard Trevithick , who pioneered the use of steam locomotives. The first full-scale working railway steam locomotive was the 3 ft ( 914 mm ) gauge Coalbrookdale Locomotive built by Trevithick in 1802. It
4224-598: The Oxfordshire Ironstone Railway . The London Underground also became publicly owned, becoming the London Transport Executive of the British Transport Commission. The Bicester Military Railway was already run by the government. The electric Liverpool Overhead Railway was also excluded from nationalisation . The Railway Executive was conscious that some lines on the (then very dense) network were unprofitable and hard to justify socially, and
4352-587: The Pennsylvania Railroad class S1 achieved speeds upwards of 150 mph, though this was never officially proven. In the United States, larger loading gauges allowed the development of very large, heavy locomotives such as the Union Pacific Big Boy , which weighs 540 long tons (550 t ; 600 short tons ) and has a tractive effort of 135,375 pounds-force (602,180 newtons). Beginning in
4480-503: The Railway Executive . The Executive attempted to introduce a modern Art Deco -style curved logo, which could also serve as the standard for station signage totems. BR eventually adopted the common branding of the BTC as its first corporate logo, a lion astride a spoked wheel, designed for the BTC by Cecil Thomas ; on the bar overlaid across the wheel, the BTC's name was replaced with the words "British Railways". This logo, nicknamed
4608-618: The Secretary of State for Transport , and is now employed as a generic symbol on street signs in Great Britain denoting railway stations. The rail transport system in Great Britain developed during the 19th century. After the grouping of 1923 under the Railways Act 1921 , there were four large railway companies, each dominating its own geographic area: the Great Western Railway (GWR), the London, Midland and Scottish Railway (LMS),
4736-417: The Transport Act 1968 . Part of these provisions was the creation of a passenger transport executive or PTE within larger metropolitan areas. Prior to this, public transport was run by individual local authorities and private companies, with little co-ordination. The PTEs took over the responsibility (but not ownership) of managing local rail networks. The 1968 Act created five new bodies. These were: This
4864-467: The Watercress Line at Alton . Although most are operated solely as leisure amenities, some also provide educational resources, and a few have ambitions to restore commercial services over routes abandoned by the nationalised industry. Steam locomotive A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam . It
4992-466: The narrow-gauge Vale of Rheidol Railway tourist line) by 1968. On 1 January 1963, the British Railways Board was created to manage the railways as a successor to the British Transport Commission. It was during the 1960s that perhaps the most substantial changes were made. Seeking to reduce rail subsidies , one-third of the network and over half of all stations were permanently closed under
5120-484: The privatisation of British Rail . Following completion of the privatisation process in 1997, responsibility for track, signalling and stations was transferred to Railtrack (later brought under public control as Network Rail ) while services were run by a variety of train operating companies . At the end of the process, any remaining obligations of British Rail were transferred to BRB (Residuary) Limited . The British Rail Double Arrow logo remains in place, now owned by
5248-590: The "Cycling Lion", was applied from 1948 to 1956 to the sides of locomotives, while the ‘hot dog’ design was adopted for smaller station name signs, known officially as ‘lamp tablets’ and coloured for the appropriate BR region, using Gill Sans lettering first adopted by the LNER from 1929. In 1956, the BTC was granted a heraldic achievement by the College of Arms and the Lord Lyon , and then BTC chairman Brian Robertson wanted
Midland Pullman - Misplaced Pages Continue
5376-401: The 1950s decisions for the "beleaguered" condition of the railway system at that time. During the late 1950s, railway finances continued to worsen; whilst passenger numbers grew after restoring many services reduced during the war, and in 1959 the government stepped in, limiting the amount the BTC could spend without ministerial authority. A White Paper proposing reorganisation was published in
5504-534: The 1955 programme (costing £1.2 billion), but did so largely for political reasons. This included the withdrawal of steam traction and its replacement by diesel (and some electric) locomotives. Not all modernisations would be effective at reducing costs. The dieselisation programme gave contracts primarily to British suppliers, who had limited experience of diesel locomotive manufacture, and rushed commissioning based on an expectation of rapid electrification; this resulted in numbers of locomotives with poor designs and
5632-588: The 1990s, public rail subsidy was counted as profit; as early as 1961, British Railways were losing £300,000 a day. Although the company was considered the sole public-transport option in many rural areas, the Beeching cuts made buses the only public transport available in some rural areas. Despite increases in traffic congestion and road fuel prices beginning to rise in the 1990s, British Rail remained unprofitable. Following sectorisation, InterCity became profitable. InterCity became one of Britain's top 150 companies, providing city centre to city centre travel across
5760-424: The 7,000 stations would close. Beeching, who is thought to have been the author of most of the report, set out some dire figures. One third of the network was carrying just 1% of the traffic. Of the 18,000 passenger coaches, 6,000 were said to be used only 18 times a year or less. Although maintaining them cost between £3 million and £4 million a year, they earned only about £0.5 million. Most of
5888-704: The Beeching cuts a generation earlier but which had seen passenger services withdrawn. This included the bulk of the Chester and Connah's Quay Railway in 1992, the Brierley Hill to Walsall section of the South Staffordshire line in 1993, while the Birmingham to Wolverhampton section of the Great Western Railway was closed in three phases between 1972 and 1992. Following the election of Labour in 1964, on
6016-455: The DRU), this arrow device was formed of two interlocked arrows across two parallel lines, symbolising a double-track railway. It was likened to a bolt of lightning or barbed wire , and also acquired a nickname: "the arrow of indecision". A mirror image of the double arrow was used on the port side of BR-owned Sealink ferry funnels. The new BR corporate identity and double arrow were displayed at
6144-578: The Design Centre in London in early 1965, and the brand name of the organisation was shortened to "British Rail". It is now employed as a generic symbol on street signs in Great Britain denoting railway stations, and is still printed on railway tickets as part of the Rail Delivery Group 's jointly managed National Rail brand. The uniformity of BR branding continued until the process of sectorisation
6272-550: The Double Arrow symbol, which has survived to this day and serves as a generic trademark to denote railway services across Great Britain. The BR Corporate Identity Manual is noted as a piece of British design history and there are plans for it to be re-published. With its creation in 1948, British Railways was divided into regions which were initially based on the areas the former Big Four operated in; later, several lines were transferred between regions. Notably, these included
6400-595: The London area; Provincial (renamed Regional Railways in 1989) responsible for all other passenger services. In the metropolitan counties local services were managed by the Passenger Transport Executives . Provincial was the most subsidised (per passenger km) of the three sectors; upon formation, its costs were four times its revenue . During the 1980s British Rail ran the Rail Riders membership club aimed at 5- to 15-year-olds. Because British Railways
6528-564: The Saar (today part of Völklingen ), but neither could be returned to working order after being dismantled, moved and reassembled. On 7 December 1835, the Adler ran for the first time between Nuremberg and Fürth on the Bavarian Ludwig Railway . It was the 118th engine from the locomotive works of Robert Stephenson and stood under patent protection. In Russia , the first steam locomotive
SECTION 50
#17328553297776656-564: The UK using one of the machines was at Upminster station on 21 March 2007. Before the rail network was privatised, British Rail introduced several discount cards through the APTIS that were available to certain demographics, issued either by National or Regional schemes: The narrow-gauge Vale of Rheidol Railway in Ceredigion, Wales, became part of British Railways at nationalisation. Although built as
6784-423: The US), or screw-reverser (if so equipped), that controls the cut-off, therefore, performs a similar function to a gearshift in an automobile – maximum cut-off, providing maximum tractive effort at the expense of efficiency, is used to pull away from a standing start, whilst a cut-off as low as 10% is used when cruising, providing reduced tractive effort, and therefore lower fuel/water consumption. Exhaust steam
6912-599: The United States, including John Fitch's miniature prototype. A prominent full sized example was Col. John Steven's "steam wagon" which was demonstrated on a loop of track in Hoboken, New Jersey in 1825. Many of the earliest locomotives for commercial use on American railroads were imported from Great Britain, including first the Stourbridge Lion and later the John Bull . However, a domestic locomotive-manufacturing industry
7040-545: The adhesive weight. Equalising beams connecting the ends of leaf springs have often been deemed a complication in Britain, however, locomotives fitted with the beams have usually been less prone to loss of traction due to wheel-slip. Suspension using equalizing levers between driving axles, and between driving axles and trucks, was standard practice on North American locomotives to maintain even wheel loads when operating on uneven track. Locomotives with total adhesion, where all of
7168-402: The boiler materials to the point where it needs to be rebuilt or replaced. Start-up on a large engine may take hours of preliminary heating of the boiler water before sufficient steam is available. Although the boiler is typically placed horizontally, for locomotives designed to work in locations with steep slopes it may be more appropriate to consider a vertical boiler or one mounted such that
7296-404: The boiler remains horizontal but the wheels are inclined to suit the slope of the rails. The steam generated in the boiler fills the space above the water in the partially filled boiler. Its maximum working pressure is limited by spring-loaded safety valves. It is then collected either in a perforated tube fitted above the water level or by a dome that often houses the regulator valve, or throttle,
7424-399: The boiler. Boiler water surrounds the firebox to stop the metal from becoming too hot. This is another area where the gas transfers heat to the water and is called the firebox heating surface. Ash and char collect in the smokebox as the gas gets drawn up the chimney ( stack or smokestack in the US) by the exhaust steam from the cylinders. The pressure in the boiler has to be monitored using
7552-544: The closures were carried out between 1963 and 1970 (including some which were not listed in the report), while other suggested closures were not carried out. The closures were heavily criticised at the time. A small number of stations and lines closed under the Beeching programme have been reopened, with further reopenings proposed. A second Beeching report, "The Development of the Major Trunk Routes", followed in 1965. This did not recommend closures as such but outlined
7680-675: The dominant fuel worldwide in steam locomotives. Railways serving sugar cane farming operations burned bagasse , a byproduct of sugar refining. In the US, the ready availability and low price of oil made it a popular steam locomotive fuel after 1900 for the southwestern railroads, particularly the Southern Pacific. In the Australian state of Victoria, many steam locomotives were converted to heavy oil firing after World War II. German, Russian, Australian and British railways experimented with using coal dust to fire locomotives. During World War 2,
7808-440: The early 1900s, steam locomotives were gradually superseded by electric and diesel locomotives , with railways fully converting to electric and diesel power beginning in the late 1930s. The majority of steam locomotives were retired from regular service by the 1980s, although several continue to run on tourist and heritage lines. The earliest railways employed horses to draw carts along rail tracks . In 1784, William Murdoch ,
SECTION 60
#17328553297777936-500: The early 1970s. Tickets issued from British Rail's APTIS system had a considerable amount of information presented in a consistent, standard format. The design for all tickets was created by Colin Goodall . This format has formed the basis for all subsequent ticket issuing systems introduced on the railway network – ticket-office-based, self-service and conductor-operated machines alike. APTIS survived in widespread use for twenty years but, in
8064-487: The early 1990s): In addition, the non-passenger sectors were: The maintenance and remaining engineering works were split off into a new company, British Rail Maintenance Limited . The new sectors were further subdivided into divisions. This ended the BR blue period as new liveries were adopted gradually. Infrastructure remained the responsibility of the regions until the "Organisation for Quality" initiative in 1991 when this too
8192-488: The early 2000s, was largely replaced by more modern PC-based ticketing systems. Some APTIS machines in the Greater London area were modified as APTIS-ANT (with no obvious difference to the ticket issued) to make them Oyster card compatible. The last APTIS machines were removed at the end of 2006 as there was no option to upgrade them to accept Chip and PIN credit card payments. The last APTIS-ANT ticket to be issued in
8320-700: The end of the Midland line as a significant route for Manchester-London traffic. An attempt was made to find work for the train units on the East Coast Main Line but, plagued as they were by rough-riding bogies, they were never run in revenue-earning service. The two units were eventually transferred to the Western Region to work alongside the Western Pullman units, which were eight-car units and included second class coaches. British Railways British Railways ( BR ), which from 1965 traded as British Rail ,
8448-431: The exhaust gas volume was vented through a cooling tower, allowing the steam exhaust to draw more air past the radiator. Running gear includes the brake gear, wheel sets , axleboxes , springing and the motion that includes connecting rods and valve gear. The transmission of the power from the pistons to the rails and the behaviour of the locomotive as a vehicle, being able to negotiate curves, points and irregularities in
8576-402: The figures in both this and the original plan were produced for political reasons and not based on detailed analysis. The aim was to increase speed, reliability, safety, and line capacity through a series of measures that would make services more attractive to passengers and freight operators, thus recovering traffic lost to the roads. Important areas included: The government appeared to endorse
8704-448: The firebox becomes exposed. Without water on top of the sheet to transfer away the heat of combustion , it softens and fails, letting high-pressure steam into the firebox and the cab. The development of the fusible plug , a temperature-sensitive device, ensured a controlled venting of steam into the firebox to warn the fireman to add water. Scale builds up in the boiler and prevents adequate heat transfer, and corrosion eventually degrades
8832-489: The first steam locomotive known to have hauled a load over a distance at Pen-y-darren in 1804, although he produced an earlier locomotive for trial at Coalbrookdale in 1802. Salamanca , built in 1812 by Matthew Murray for the Middleton Railway , was the first commercially successful steam locomotive. Locomotion No. 1 , built by George Stephenson and his son Robert's company Robert Stephenson and Company ,
8960-466: The following year, and a new structure was brought into effect by the Transport Act 1962. This abolished the commission and replaced it by several separate boards. These included a British Railways Board, which took over on 1 January 1963. Following semi-secret discussions on railway finances by the government-appointed Stedeford Committee in 1961, one of its members, Dr Richard Beeching , was offered
9088-662: The former Great Central lines from the Eastern Region to the London Midland Region, and the West of England Main Line from the Southern Region to Western Region The North Eastern Region was merged with the Eastern Region in 1967. In 1982, the regions were abolished as the service provider (but retained for administration) and replaced by "business sectors", a process known as sectorisation . The passenger sectors were (by
9216-616: The four old railway police forces, the London Transport Police, canal police and several minor dock forces. In 1957 the Maxwell-Johnson enquiry found that policing requirements for the railway could not be met by civil forces and that it was essential that a specialist police force be retained. On 1 January 1962, the British Transport Commission Police ceased to cover British Waterways property and exactly
9344-459: The frames ( well tank ). The fuel used depended on what was economically available to the railway. In the UK and other parts of Europe, plentiful supplies of coal made this the obvious choice from the earliest days of the steam engine. Until 1870, the majority of locomotives in the United States burned wood, but as the Eastern forests were cleared, coal gradually became more widely used until it became
9472-568: The go-ahead, including the East Coast Main Line , the spur from Doncaster to Leeds , and the lines in East Anglia out of London Liverpool Street to Norwich and King's Lynn . The list with approximate completion dates includes: In the Southwest, the South West Main Line from Bournemouth to Weymouth was electrified along with other infill 750 V DC third rail electrification in
9600-418: The grate into an ashpan. If oil is used as the fuel, a door is needed for adjusting the air flow, maintaining the firebox, and cleaning the oil jets. The fire-tube boiler has internal tubes connecting the firebox to the smokebox through which the combustion gases flow transferring heat to the water. All the tubes together provide a large contact area, called the tube heating surface, between the gas and water in
9728-577: The highly mineralised water was available, and locomotive boilers were lasting less than a quarter of the time normally expected. In the days of steam locomotion, about half the total train load was water for the engine. The line's operator, Commonwealth Railways , was an early adopter of the diesel-electric locomotive . The fire-tube boiler was standard practice for steam locomotive. Although other types of boiler were evaluated they were not widely used, except for some 1,000 locomotives in Hungary which used
9856-424: The journey from London to Manchester in a record 3 hours 15 minutes. The best time between the two cities immediately previously had been 3 hours 50 minutes. The Midland Pullman ran every weekday, up to London in the morning and down to Manchester in the evening. To fill in between these turns, there was an afternoon return trip from St Pancras to Nottingham described by railway staff as "The most luxurious ECS in
9984-515: The late 1970s, and reached a low in 1982. Network improvements included completing electrification of the Great Eastern Main Line from London to Norwich between 1976 and 1986 and the East Coast Main Line from London to Edinburgh between 1985 and 1990. A mainline route closure during this period of relative network stability was the 1,500 V DC -electrified Woodhead line between Manchester and Sheffield : passenger service ceased in 1970 and goods in 1981. A further British Rail report from
10112-657: The locomotive ran on a circular track in the factory yard. It was the first locomotive to be built on the European mainland and the first steam-powered passenger service; curious onlookers could ride in the attached coaches for a fee. It is portrayed on a New Year's badge for the Royal Foundry dated 1816. Another locomotive was built using the same system in 1817. They were to be used on pit railways in Königshütte and in Luisenthal on
10240-468: The locomotive, either on the locomotive itself or in a tender coupled to it. Variations in this general design include electrically powered boilers, turbines in place of pistons, and using steam generated externally. Steam locomotives were first developed in the United Kingdom during the early 19th century and used for railway transport until the middle of the 20th century. Richard Trevithick built
10368-474: The logo with the name in a circle was also used on locomotives. The zeal for modernisation in the Beeching era drove the next rebranding exercise, and BR management wished to divest the organisation of anachronistic, heraldic motifs and develop a corporate identity to rival that of London Transport . BR's design panel set up a working party led by Milner Gray of the Design Research Unit . They drew up
10496-403: The main chassis, with a variety of spacers and a buffer beam at each end to form a rigid structure. When inside cylinders are mounted between the frames, the plate frames are a single large casting that forms a major support element. The axleboxes slide up and down to give some sprung suspension, against thickened webs attached to the frame, called "hornblocks". American practice for many years
10624-509: The mainframes. Locomotives with multiple coupled-wheels on a rigid chassis would have unacceptable flange forces on tight curves giving excessive flange and rail wear, track spreading and wheel climb derailments. One solution was to remove or thin the flanges on an axle. More common was to give axles end-play and use lateral motion control with spring or inclined-plane gravity devices. Railroads generally preferred locomotives with fewer axles, to reduce maintenance costs. The number of axles required
10752-470: The moment when the valve blocks a steam port, "cutting off" admission steam and thus determining the proportion of the stroke during which steam is admitted into the cylinder; for example a 50% cut-off admits steam for half the stroke of the piston. The remainder of the stroke is driven by the expansive force of the steam. Careful use of cut-off provides economical use of steam and in turn, reduces fuel and water consumption. The reversing lever ( Johnson bar in
10880-402: The nation from Aberdeen and Inverness in the north to Poole and Penzance in the south. In 1979, the incoming Conservative Government led by Margaret Thatcher was viewed as anti-railway, and did not want to commit public money to the railways. However, British Rail was allowed to spend its own money with government approval. This led to a number of electrification projects being given
11008-647: The nationalisation of the network as part of a policy of nationalising public services by Clement Attlee 's Labour Government. British Railways came into existence as the business name of the Railway Executive of the British Transport Commission (BTC) on 1 January 1948 when it took over the assets of the Big Four. There were also joint railways between the Big Four and a few light railways to consider (see list of constituents of British Railways ). Excluded from nationalisation were industrial lines like
11136-826: The original John Bull was on static display in the National Museum of American History in Washington, D.C. The replica is preserved at the Railroad Museum of Pennsylvania . The first railway service outside the United Kingdom and North America was opened in 1829 in France between Saint-Etienne and Lyon ; it was initially limited to animal traction and converted to steam traction early 1831, using Seguin locomotives . The first steam locomotive in service in Europe outside of France
11264-468: The piston in turn. In a two-cylinder locomotive, one cylinder is located on each side of the vehicle. The cranks are set 90° out of phase. During a full rotation of the driving wheel, steam provides four power strokes; each cylinder receives two injections of steam per revolution. The first stroke is to the front of the piston and the second stroke to the rear of the piston; hence two working strokes. Consequently, two deliveries of steam onto each piston face in
11392-675: The post of chairing the BTC while it lasted and then became the first Chairman of the British Railways Board. A major traffic census in April 1961, which lasted one week, was used in the compilation of a report on the future of the network. This report – The Reshaping of British Railways – was published by the BRB in March 1963. The proposals, which became known as the Beeching cuts , were dramatic. A third of all passenger services and more than 4,000 of
11520-480: The public. The reaction was so strong that Margaret Thatcher , Prime Minister at that time, stated that decisions on the report would not immediately be taken. The Serpell report was quietly shelved, although the British Government was periodically accused by its opponents of implementing the report via stealth for some years thereafter. The 1980s and 1990s saw the closure of some railways which had survived
11648-411: The purpose of which is to control the amount of steam leaving the boiler. The steam then either travels directly along and down a steam pipe to the engine unit or may first pass into the wet header of a superheater , the role of the latter being to improve thermal efficiency and eliminate water droplets suspended in the "saturated steam", the state in which it leaves the boiler. On leaving the superheater,
11776-453: The return of road haulage to the private sector; however, BR retained its own (smaller) in-house road haulage service. The report, latterly known as the "Modernisation Plan", was published in January 1955. It was intended to bring the railway system into the 20th century. A government White Paper produced in 1956 stated that modernisation would help eliminate BR's financial deficit by 1962, but
11904-432: The rolling stock it had inherited from its predecessor railway companies. Initially, an express blue (followed by GWR -style Brunswick green in 1952) was used on passenger locomotives, and LNWR -style lined black for mixed-traffic locomotives, but later green was more widely adopted. Development of a corporate identity for the organisation was hampered by the competing ambitions of the British Transport Commission and
12032-418: The side of the piston receiving steam, thus slightly reducing cylinder power. Designing the exhaust ejector became a specific science, with engineers such as Chapelon , Giesl and Porta making large improvements in thermal efficiency and a significant reduction in maintenance time and pollution. A similar system was used by some early gasoline/kerosene tractor manufacturers ( Advance-Rumely / Hart-Parr ) –
12160-466: The south. In 1988, the line to Aberdare was reopened. A British Rail advertisement ("Britain's Railway", directed by Hugh Hudson ) featured some of the best-known railway structures in Britain, including the Forth Rail Bridge , Royal Albert Bridge , Glenfinnan Viaduct and London Paddington station . London Liverpool Street station was rebuilt, opened by Queen Elizabeth II , and a new station
12288-406: The speed and smoothness of the journey and the luxury of the trains. Trains were later re-timed to suit business travellers better. The service was withdrawn in 1966 and replaced by the electric-locomotive-hauled Manchester Pullman running from Manchester Piccadilly to London Euston via the newly electrified West Coast Main Line, with a much-reduced journey time of 2 hours 30 minutes, marking
12416-504: The steam exits the dry header of the superheater and passes down a steam pipe, entering the steam chests adjacent to the cylinders of a reciprocating engine. Inside each steam chest is a sliding valve that distributes the steam via ports that connect the steam chest to the ends of the cylinder space. The role of the valves is twofold: admission of each fresh dose of steam, and exhaust of the used steam once it has done its work. The cylinders are double-acting, with steam admitted to each side of
12544-469: The steam locomotive. Trevithick continued his own steam propulsion experiments through another trio of locomotives, concluding with the Catch Me Who Can in 1808, first in the world to haul fare-paying passengers. In 1812, Matthew Murray 's successful twin-cylinder rack locomotive Salamanca first ran on the edge-railed rack-and-pinion Middleton Railway . Another well-known early locomotive
12672-434: The track, is of paramount importance. Because reciprocating power has to be directly applied to the rail from 0 rpm upwards, this creates the problem of adhesion of the driving wheels to the smooth rail surface. Adhesive weight is the portion of the locomotive's weight bearing on the driving wheels. This is made more effective if a pair of driving wheels is able to make the most of its axle load, i.e. its individual share of
12800-596: The trunk routes of the West Coast Main Line , East Coast Main Line , Great Western Main Line , Great Eastern Main Line and Midland Main Line , and other lines. Policing on (and within) the network was carried out British Transport Police (BTP). In 1947 the Transport Act created the British Transport Commission (BTC), which unified the railway system. On 1 January 1949, the British Transport Commission Police (BTCP) were created, formed from
12928-433: The two cylinders generates a full revolution of the driving wheel. Each piston is attached to the driving axle on each side by a connecting rod, and the driving wheels are connected together by coupling rods to transmit power from the main driver to the other wheels. Note that at the two " dead centres ", when the connecting rod is on the same axis as the crankpin on the driving wheel, the connecting rod applies no torque to
13056-423: The unsuccessful Advanced Passenger Train (APT). Gradually, passengers replaced freight as the main source of business. From 1982, under sectorisation , the regions were gradually replaced by "business sectors", which were originally responsible for marketing and other commercial matters when they were first created but had taken over entirely by 1990. During the 1980s and 1990s, the British Government directed
13184-419: The water level in a transparent tube, or sight glass. Efficient and safe operation of the boiler requires keeping the level in between lines marked on the sight glass. If the water level is too high, steam production falls, efficiency is lost and water is carried out with the steam into the cylinders, possibly causing mechanical damage. More seriously, if the water level gets too low, the crown sheet (top sheet) of
13312-401: The water-tube Brotan boiler . A boiler consists of a firebox where the fuel is burned, a barrel where water is turned into steam, and a smokebox which is kept at a slightly lower pressure than outside the firebox. Solid fuel, such as wood, coal or coke, is thrown into the firebox through a door by a fireman , onto a set of grates which hold the fuel in a bed as it burns. Ash falls through
13440-408: The wheel. Therefore, if both cranksets could be at "dead centre" at the same time, and the wheels should happen to stop in this position, the locomotive could not start moving. Therefore, the crankpins are attached to the wheels at a 90° angle to each other, so only one side can be at dead centre at a time. Each piston transmits power through a crosshead , connecting rod ( Main rod in the US) and
13568-411: The wheels are coupled together, generally lack stability at speed. To counter this, locomotives often fit unpowered carrying wheels mounted on two-wheeled trucks or four-wheeled bogies centred by springs/inverted rockers/geared rollers that help to guide the locomotive through curves. These usually take on weight – of the cylinders at the front or the firebox at the rear – when the width exceeds that of
13696-406: The will to increase efficiency by that route. The steam generated in the boiler not only moves the locomotive, but is also used to operate other devices such as the whistle, the air compressor for the brakes, the pump for replenishing the water in the boiler and the passenger car heating system. The constant demand for steam requires a periodic replacement of water in the boiler. The water is kept in
13824-844: The world also runs in Austria: the GKB 671 built in 1860, has never been taken out of service, and is still used for special excursions. In 1838, the third steam locomotive to be built in Germany, the Saxonia , was manufactured by the Maschinenbaufirma Übigau near Dresden , built by Prof. Johann Andreas Schubert . The first independently designed locomotive in Germany was the Beuth , built by August Borsig in 1841. The first locomotive produced by Henschel-Werke in Kassel ,
13952-430: The world." The train had two kitchens, and a full meal service was provided at every seat. The operation attracted criticism because being a fixed-formation train it required a full spare set, making poor use of expensive assets. Critics also noted that the new service was not best timed for priority business use: initially the up Midland Pullman did not leave Manchester until 09:00. Other commentators, however, praised
14080-548: Was Puffing Billy , built 1813–14 by engineer William Hedley . It was intended to work on the Wylam Colliery near Newcastle upon Tyne. This locomotive is the oldest preserved, and is on static display at the Science Museum, London . George Stephenson , a former miner working as an engine-wright at Killingworth Colliery , developed up to sixteen Killingworth locomotives , including Blücher in 1814, another in 1815, and
14208-485: Was a state-owned company that operated most rail transport in Great Britain from 1948 to 1997. Originally a trading brand of the Railway Executive of the British Transport Commission , it became an independent statutory corporation in January 1963, when it was formally renamed the British Railways Board . British Railways was formed on 1 January 1948 as a result of the Transport Act 1947 , which nationalised
14336-625: Was built in 1834 by Cherepanovs , however, it suffered from the lack of coal in the area and was replaced with horse traction after all the woods nearby had been cut down. The first Russian Tsarskoye Selo steam railway started in 1837 with locomotives purchased from Robert Stephenson and Company . In 1837, the first steam railway started in Austria on the Emperor Ferdinand Northern Railway between Vienna-Floridsdorf and Deutsch-Wagram . The oldest continually working steam engine in
14464-565: Was constructed at Stansted Airport in 1991. The following year, the Maesteg line was reopened. In 1988, the Windsor Link Line, Manchester was constructed and has proven to be an important piece of infrastructure. Before the introduction of APTIS (Accountancy and Passenger Ticket Issuing System), British Rail used the Edmondson railway ticket , first introduced in the 1840s and phased out in
14592-735: Was constructed for the Coalbrookdale ironworks in Shropshire in the United Kingdom though no record of it working there has survived. On 21 February 1804, the first recorded steam-hauled railway journey took place as another of Trevithick's locomotives hauled a train along the 4 ft 4 in ( 1,321 mm )-wide tramway from the Pen-y-darren ironworks, near Merthyr Tydfil , to Abercynon in South Wales. Accompanied by Andrew Vivian , it ran with mixed success. The design incorporated
14720-411: Was dictated by the maximum axle loading of the railroad in question. A builder would typically add axles until the maximum weight on any one axle was acceptable to the railroad's maximum axle loading. A locomotive with a wheel arrangement of two lead axles, two drive axles, and one trailing axle was a high-speed machine. Two lead axles were necessary to have good tracking at high speeds. Two drive axles had
14848-480: Was entered in and won the Rainhill Trials . This success led to the company emerging as the pre-eminent builder of steam locomotives used on railways in the UK, US and much of Europe. The Liverpool and Manchester Railway opened a year later making exclusive use of steam power for passenger and goods trains . Before the arrival of British imports, some domestic steam locomotive prototypes were built and tested in
14976-473: Was introduced in the 1980s. Certain BR operations such as Inter-City , Network SouthEast , Regional Railways or Rail Express Systems began to adopt their own identities, introducing logos and colour schemes which were essentially variants of the British Rail brand. Eventually, as sectorisation developed into a prelude to privatisation, the unified British Rail brand disappeared, with the notable exception of
15104-679: Was named The Elephant , which on 5 May 1835 hauled a train on the first line in Belgium, linking Mechelen and Brussels. In Germany, the first working steam locomotive was a rack-and-pinion engine, similar to the Salamanca , designed by the British locomotive pioneer John Blenkinsop . Built in June 1816 by Johann Friedrich Krigar in the Royal Berlin Iron Foundry ( Königliche Eisengießerei zu Berlin),
15232-686: Was of clerestory roofed design, imported from the Pullman Company in the US and assembled in Derby. In July 1960 the Midland Pullman was relaunched as a luxury all-first-class service using two new Blue Pullman six-car diesel-electric units, aimed at covering the high end of the Manchester-London business market while services on the West Coast Main Line were disrupted during electrification. It called only at Cheadle Heath (now closed), and made
15360-524: Was opened. The arid nature of south Australia posed distinctive challenges to their early steam locomotion network. The high concentration of magnesium chloride in the well water ( bore water ) used in locomotive boilers on the Trans-Australian Railway caused serious and expensive maintenance problems. At no point along its route does the line cross a permanent freshwater watercourse, so bore water had to be relied on. No inexpensive treatment for
15488-563: Was soon established. In 1830, the Baltimore and Ohio Railroad 's Tom Thumb , designed by Peter Cooper , was the first commercial US-built locomotive to run in America; it was intended as a demonstration of the potential of steam traction rather than as a revenue-earning locomotive. The DeWitt Clinton , built in 1831 for the Mohawk and Hudson Railroad , was a notable early locomotive. As of 2021 ,
15616-422: Was such a large operation, running not just railways but also ferries, steamships and hotels, it has been considered difficult to analyse the effects of nationalisation. Prices rose quickly in this period, rising 108% in real terms from 1979 to 1994, as prices rose by 262% but RPI only increased by 154% in the same time. Following nationalisation in 1948, British Railways began to adapt the corporate liveries on
15744-403: Was supplied at stopping places and locomotive depots from a dedicated water tower connected to water cranes or gantries. In the UK, the US and France, water troughs ( track pans in the US) were provided on some main lines to allow locomotives to replenish their water supply without stopping, from rainwater or snowmelt that filled the trough due to inclement weather. This was achieved by using
15872-539: Was the first real subdivision of BR since its inception in 1949, and likely saved many lines earmarked for closure, notably the Liverpool, Crosby and Southport Railway , which now forms part of the Merseyrail network. Upon sectorisation in 1982, three passenger sectors were created: InterCity , operating principal express services; London & South East (renamed Network SouthEast in 1986) operating commuter services in
16000-405: Was the first steam locomotive to haul passengers on a public railway, the Stockton and Darlington Railway , in 1825. Rapid development ensued; in 1830 George Stephenson opened the first public inter-city railway, the Liverpool and Manchester Railway , after the success of Rocket at the 1829 Rainhill Trials had proved that steam locomotives could perform such duties. Robert Stephenson and Company
16128-399: Was the pre-eminent builder of steam locomotives in the first decades of steam for railways in the United Kingdom, the United States, and much of Europe. Towards the end of the steam era, a longstanding British emphasis on speed culminated in a record, still unbroken, of 126 miles per hour (203 kilometres per hour) by LNER Class A4 4468 Mallard , however there are long-standing claims that
16256-404: Was to use built-up bar frames, with the smokebox saddle/cylinder structure and drag beam integrated therein. In the 1920s, with the introduction of "superpower", the cast-steel locomotive bed became the norm, incorporating frames, spring hangers, motion brackets, smokebox saddle and cylinder blocks into a single complex, sturdy but heavy casting. A SNCF design study using welded tubular frames gave
16384-451: Was transferred to the sectors. The Anglia Region was created in late 1987, its first General Manager being John Edmonds, who began his appointment on 19 October 1987. Full separation from the Eastern Region – apart from engineering design needs – occurred on 29 April 1988. It handled the services from Fenchurch Street and Liverpool Street , its western boundary being Hertford East , Meldreth and Whittlesea . The former BR network, with
#776223