156-981: The Central Massachusetts Railroad was a railroad in Massachusetts . The eastern terminus of the line was at North Cambridge Junction where it split off from the Middlesex Central Branch of the Boston and Lowell Railroad in North Cambridge and through which it had access to North Station in Boston . From there, the route ran 98.77 miles west through the modern-day towns of Belmont , Waltham , Weston , Wayland , Sudbury , Hudson , Bolton , Berlin , Clinton , West Boylston , Holden , Rutland , Oakham , Barre , New Braintree , Hardwick , Ware , Palmer , Belchertown , Amherst , and Hadley to its western terminal junction at N. O. Tower in Northampton with
312-408: A crank on a driving axle. Steam locomotives have been phased out in most parts of the world for economical and safety reasons, although many are preserved in working order by heritage railways . Electric locomotives draw power from a stationary source via an overhead wire or third rail . Some also or instead use a battery . In locomotives that are powered by high-voltage alternating current ,
468-586: A dining car . Some lines also provide over-night services with sleeping cars . Some long-haul trains have been given a specific name . Regional trains are medium distance trains that connect cities with outlying, surrounding areas, or provide a regional service, making more stops and having lower speeds. Commuter trains serve suburbs of urban areas, providing a daily commuting service. Airport rail links provide quick access from city centres to airports . High-speed rail are special inter-city trains that operate at much higher speeds than conventional railways,
624-710: A fourth rail system in 1890 on the City and South London Railway , now part of the London Underground Northern line . This was the first major railway to use electric traction . The world's first deep-level electric railway, it runs from the City of London , under the River Thames , to Stockwell in south London. The first practical AC electric locomotive was designed by Charles Brown , then working for Oerlikon , Zürich. In 1891, Brown had demonstrated long-distance power transmission, using three-phase AC , between
780-527: A funicular railway at the Hohensalzburg Fortress in Austria. The line originally used wooden rails and a hemp haulage rope and was operated by human or animal power, through a treadwheel . The line is still operational, although in updated form and is possibly the oldest operational railway. Wagonways (or tramways ) using wooden rails, hauled by horses, started appearing in the 1550s to facilitate
936-488: A hydro-electric plant at Lauffen am Neckar and Frankfurt am Main West, a distance of 280 km (170 mi). Using experience he had gained while working for Jean Heilmann on steam–electric locomotive designs, Brown observed that three-phase motors had a higher power-to-weight ratio than DC motors and, because of the absence of a commutator , were simpler to manufacture and maintain. However, they were much larger than
1092-431: A steam engine that provides adhesion. Coal , petroleum , or wood is burned in a firebox , boiling water in the boiler to create pressurized steam. The steam travels through the smokebox before leaving via the chimney or smoke stack. In the process, it powers a piston that transmits power directly through a connecting rod (US: main rod) and a crankpin (US: wristpin) on the driving wheel (US main driver) or to
1248-469: A transformer in the locomotive converts the high-voltage low-current power to low-voltage high current used in the traction motors that power the wheels. Modern locomotives may use three-phase AC induction motors or direct current motors. Under certain conditions, electric locomotives are the most powerful traction. They are also the cheapest to run and provide less noise and no local air pollution. However, they require high capital investments both for
1404-665: A 1,110-foot (340 m)-long tunnel. The western portal of the tunnel opened onto a 917-foot viaduct near the site of the Wachusett Dam that passed over Route 70 and the Nashua River before connecting with the WN&;P Division main line at Clinton Junction. Traffic over the Central Massachusetts Branch followed the WN&P Division main line through Sterling into Oakdale where a redesigned junction routed it back onto
1560-567: A brief upswing in traffic between World War I and the early 1920s but the Great Depression and increased competition from automobiles and trucks began to take their toll in the latter half of the decade. By 1928 no freights and only one passenger train ran the length of the line from Boston to Northampton. The struggling economy and reduction in business forced the B&;M to take austerity measures and cut back on less profitable lines including
1716-471: A concerted effort from private landowners who had taken over the long-abandoned property. In 2006 the western end of the trail was extended to N. O. Tower. In West Boylston, Holden, and Rutland a volunteer organization called Wachusett Greenways began to convert the roughly 30 miles of property between Oakdale and Rutland to the Mass Central Rail Trail . The Mass Central Rail Trail currently includes
SECTION 10
#17328557375381872-622: A connection in Gleasondale from Gleason Junction on the Central Massachusetts Branch to C. M. Junction on the Marlborough Branch to enable passenger service into Marlborough . While traffic into Marlborough flourished, traffic along the connection in Jefferson languished, and in 1909 the B&M took up that track. On June 5, 1895 the General Court of Massachusetts authorized the damming of
2028-542: A cornfield for the Norwottuck and promised rights to hunt, fish and set up wigwams within the negotiated land. Ownership was transferred to the settlers and confirmed by the General Court . These original boundaries include part of present-day Granby. In August 1662, Pynchon negotiated a deed with Awonunsk, her husband Wequagon, and her son Squomp, for land also in present-day Granby, South Hadley and Belchertown. Ownership
2184-544: A diesel locomotive from the company in 1909. The world's first diesel-powered locomotive was operated in the summer of 1912 on the Winterthur–Romanshorn railway in Switzerland, but was not a commercial success. The locomotive weight was 95 tonnes and the power was 883 kW with a maximum speed of 100 km/h (62 mph). Small numbers of prototype diesel locomotives were produced in a number of countries through
2340-468: A double track plateway, erroneously sometimes cited as world's first public railway, in south London. William Jessop had earlier used a form of all-iron edge rail and flanged wheels successfully for an extension to the Charnwood Forest Canal at Nanpantan , Loughborough, Leicestershire in 1789. In 1790, Jessop and his partner Outram began to manufacture edge rails. Jessop became a partner in
2496-631: A feasibility study anyway estimating that restoring service to the route as far as Berlin would cost in excess of $ 103 million and that any benefit gained was unlikely to outweigh the costs. In 1999 Evans, now the Director of Planning for the MBTA, proposed converting the Central Massachusetts right of way into a busway but the state rejected this proposal as well. As of 2024, most of the tracks between Clemantis Brook and Berlin have been removed, and most of
2652-662: A hearing before the Interstate Commerce Commission (ICC) regarding his questionable business practices. He abruptly resigned from the presidencies of both the NYNH&;H and B&M on July 9 leaving the Hampden a bridge between two suddenly competing railroads. Despite one more tour by B&M officials in November 1914 neither they nor the NYNH&H wished to lease the line, which was shut down for good in 1925. The failure of
2808-437: A large turning radius in its design. While high-speed rail is most often designed for passenger travel, some high-speed systems also offer freight service. Since 1980, rail transport has changed dramatically, but a number of heritage railways continue to operate as part of living history to preserve and maintain old railway lines for services of tourist trains. A train is a connected series of rail vehicles that move along
2964-488: A larger locomotive named Galvani , exhibited at the Royal Scottish Society of Arts Exhibition in 1841. The seven-ton vehicle had two direct-drive reluctance motors , with fixed electromagnets acting on iron bars attached to a wooden cylinder on each axle, and simple commutators . It hauled a load of six tons at four miles per hour (6 kilometers per hour) for a distance of one and a half miles (2.4 kilometres). It
3120-423: A locomotive. This involves one or more powered vehicles being located at the front of the train, providing sufficient tractive force to haul the weight of the full train. This arrangement remains dominant for freight trains and is often used for passenger trains. A push–pull train has the end passenger car equipped with a driver's cab so that the engine driver can remotely control the locomotive. This allows one of
3276-490: A meetinghouse without town meeting approval. In response, a group of 27 east side residents and three west side residents tore down the partially constructed meetinghouse. In 1762, the General Court split the district into an east and west parish, each with its own meetinghouse. With tensions between the parishes still high, the General Court set off the east parish as the Town of Granby, being incorporated on June 11, 1768. Granby
SECTION 20
#17328557375383432-477: A number of trains per hour (tph). Passenger trains can usually be into two types of operation, intercity railway and intracity transit. Whereas intercity railway involve higher speeds, longer routes, and lower frequency (usually scheduled), intracity transit involves lower speeds, shorter routes, and higher frequency (especially during peak hours). Intercity trains are long-haul trains that operate with few stops between cities. Trains typically have amenities such as
3588-606: A petition requesting that the new railroad extend further west to Northampton. On May 10, 1869 the General Court chartered the Massachusetts Central Railroad and united it with the Wayland and Sudbury Branch. The Massachusetts Central Railroad was organized on September 2, 1869 with James M. Stone of Charlestown elected as its first president. Construction began the following fall despite difficulty in raising capital. The company hired contractor Norman Munson to build
3744-650: A piece of circular rail track in Bloomsbury , London, the Catch Me Who Can , but never got beyond the experimental stage with railway locomotives, not least because his engines were too heavy for the cast-iron plateway track then in use. The first commercially successful steam locomotive was Matthew Murray 's rack locomotive Salamanca built for the Middleton Railway in Leeds in 1812. This twin-cylinder locomotive
3900-460: A pivotal role in the development and widespread adoption of the steam locomotive. His designs considerably improved on the work of the earlier pioneers. He built the locomotive Blücher , also a successful flanged -wheel adhesion locomotive. In 1825 he built the locomotive Locomotion for the Stockton and Darlington Railway in the northeast of England, which became the first public steam railway in
4056-564: A portion of the former Fitchburg and Worcester Railroad in Sterling between Sterling Junction and Sterling Center; however this route was never a part of the Central Massachusetts Branch and does not connect with the rest of the trail since the former WN&P Division main line tracks remain in service as the Worcester Main Line of Pan Am Railways . The Massachusetts Central Railroad operated five locomotives between 1881 and 1883. These were
4212-439: A revival in recent decades due to road congestion and rising fuel prices, as well as governments investing in rail as a means of reducing CO 2 emissions . Smooth, durable road surfaces have been made for wheeled vehicles since prehistoric times. In some cases, they were narrow and in pairs to support only the wheels. That is, they were wagonways or tracks. Some had grooves or flanges or other mechanical means to keep
4368-724: A single lever to control both engine and generator in a coordinated fashion, and was the prototype for all diesel–electric locomotive control systems. In 1914, world's first functional diesel–electric railcars were produced for the Königlich-Sächsische Staatseisenbahnen ( Royal Saxon State Railways ) by Waggonfabrik Rastatt with electric equipment from Brown, Boveri & Cie and diesel engines from Swiss Sulzer AG . They were classified as DET 1 and DET 2 ( de.wiki ). The first regular used diesel–electric locomotives were switcher (shunter) locomotives . General Electric produced several small switching locomotives in
4524-407: A standard. Following SNCF's successful trials, 50 Hz, now also called industrial frequency was adopted as standard for main-lines across the world. Earliest recorded examples of an internal combustion engine for railway use included a prototype designed by William Dent Priestman . Sir William Thomson examined it in 1888 and described it as a "Priestman oil engine mounted upon a truck which
4680-620: A terminus about one-half mile (800 m) away. A funicular railway was also made at Broseley in Shropshire some time before 1604. This carried coal for James Clifford from his mines down to the River Severn to be loaded onto barges and carried to riverside towns. The Wollaton Wagonway , completed in 1604 by Huntingdon Beaumont , has sometimes erroneously been cited as the earliest British railway. It ran from Strelley to Wollaton near Nottingham . The Middleton Railway in Leeds , which
4836-408: A wheel. This was a large stationary engine , powering cotton mills and a variety of machinery; the state of boiler technology necessitated the use of low-pressure steam acting upon a vacuum in the cylinder, which required a separate condenser and an air pump . Nevertheless, as the construction of boilers improved, Watt investigated the use of high-pressure steam acting directly upon a piston, raising
Central Massachusetts Railroad - Misplaced Pages Continue
4992-462: Is 13 miles (21 km) north of Springfield , the largest city in western Massachusetts. The Holyoke Range is in the northern part of Granby. Major peaks within the town are Long Mountain and Mount Norwottuck . Norwottuck is the highest point in town at 1,106 feet (337 m) above sea level. The Metacomet-Monadnock Trail runs along this mountain range as it passes through Granby. The Horse Caves are geological ledges along this trail. As of
5148-410: Is a single, self-powered car, and may be electrically propelled or powered by a diesel engine . Multiple units have a driver's cab at each end of the unit, and were developed following the ability to build electric motors and other engines small enough to fit under the coach. There are only a few freight multiple units, most of which are high-speed post trains. Steam locomotives are locomotives with
5304-399: Is dominant. Electro-diesel locomotives are built to run as diesel–electric on unelectrified sections and as electric locomotives on electrified sections. Alternative methods of motive power include magnetic levitation , horse-drawn, cable , gravity, pneumatics and gas turbine . A passenger train stops at stations where passengers may embark and disembark. The oversight of the train is
5460-688: Is one of only three towns in Massachusetts whose local telephone service is not furnished by the former Bell System as Granby has maintained its own service, Granby Telephone & Telegraph , since 1903. The other two such towns are Richmond and Hancock , both in Berkshire County . According to the United States Census Bureau , the town has a total area of 28.1 square miles (72.7 km ), of which 27.8 square miles (72.1 km ) are land and 0.27 square miles (0.7 km ), or 0.92%,
5616-408: Is usually provided by diesel or electrical locomotives . While railway transport is capital-intensive and less flexible than road transport, it can carry heavy loads of passengers and cargo with greater energy efficiency and safety. Precursors of railways driven by human or animal power have existed since antiquity, but modern rail transport began with the invention of the steam locomotive in
5772-400: Is water. Granby is bordered by South Hadley to the west, Amherst to the north, Belchertown to the east, and Ludlow and Chicopee to the south. Two highways pass through the town: U.S. Route 202 runs eastward though town from South Hadley to Belchertown on East State Street and West State Street, while Route 116 runs northeastward from South Hadley to Amherst along Amherst Road. Granby
5928-550: Is worked on a temporary line of rails to show the adaptation of a petroleum engine for locomotive purposes." In 1894, a 20 hp (15 kW) two axle machine built by Priestman Brothers was used on the Hull Docks . In 1906, Rudolf Diesel , Adolf Klose and the steam and diesel engine manufacturer Gebrüder Sulzer founded Diesel-Sulzer-Klose GmbH to manufacture diesel-powered locomotives. Sulzer had been manufacturing diesel engines since 1898. The Prussian State Railways ordered
6084-618: The Assabet River Rail Trail . In Boston the former Central Massachusetts Branch section of the Hill Crossing Freight Cutoff between Hill Crossing and North Cambridge Junction became the Fitchburg Cutoff Path . The towns along the former Wheelwright Branch exhibited similar enthusiasm for recreational trails along the property. In March 1985 with support from the local governments and regional planning agency
6240-606: The Boston and Lowell Railroad (B&L) mainline at Willow Bridge . However, this was later changed to join the cutoff at North Cambridge Junction, west of North Avenue (now Massachusetts Avenue). Other amendments included a branch from Amherst to a connection with the Troy and Greenfield Railroad in West Deerfield and approval to connect with and build over the route of the never-constructed Holyoke and Belchertown Railroad through Granby and South Hadley . With its new connection in
6396-746: The Connecticut River Railroad . In the late 1860s citizens in the towns of Sudbury, Wayland, and Weston petitioned the General Court of Massachusetts to build a railroad through their towns. On February 21, 1868 the state chartered the Wayland and Sudbury Branch Railroad to run 6.75 miles from Mill Village in Sudbury through Wayland to a connection with the Fitchburg Railroad at Stony Brook in Weston. Later that year another group of citizens submitted
Central Massachusetts Railroad - Misplaced Pages Continue
6552-660: The Gothic -inspired Victorian style of architecture popular during the 1870s. The name of the architect responsible for their design has been lost to time. Cost restrictions played heavily into the station designs though the railroad added decorations such as painted wainscotting and gables for aesthetics. All of the stations were wooden and based on one of two basic plans for smaller or larger communities. Individual stations were often tailored to their location, including additions such as attached or separate freight houses and milk sheds which were similarly decorated to appear presentable to
6708-730: The Hampden Railroad with the intent to lease the new route upon its completion. The Massachusetts General Court incorporated the Hampden in July 1910. It started at Hampden Junction on the Central Massachusetts Branch about two miles east of Bondsville and continued 14.82 miles southwest through Belchertown, Ludlow , and Chicopee to the B&A main line at Athol Junction about two miles east of Springfield. Construction finished by May 9, 1913 with service between New York and Boston scheduled to commence on June 23. Just days before its grand opening operations were suspended indefinitely as Mellen faced
6864-585: The Linden Street Bridge that DCR will begin restoration in 2025. As of 2019, DCR moved forward in Weston and Wayland and opened a 4.5 mile paved section of the trail from the bridge over the MBTA Fitchburg line at the Waltham-Weston border as far west as Wayland Station near the intersection of Route 126 and US 20. A crushed stone continuation connects the fully paved portion with the shopping center at
7020-594: The Massachusetts DCR executed a 99-year lease with the MBTA to build what was renamed the Mass Central Rail Trail—Wayside , 23 miles from Berlin to Waltham. However, construction took significantly longer and is still planned or ongoing in various sections, as DCR funding was limited and various funding sources were identified . Waltham eventually completed the main Waltham section in 2023, except for
7176-620: The Metropolitan Water and Sewerage Board reached an agreement with the B&M to reroute the Central Massachusetts Branch according to the latter plan. The new portion of the Central Massachusetts Branch started just west of West Berlin Junction in Berlin where the Central Massachusetts Branch connected with the Fitchburg Line of the NYNH&H. From there it ran northwest into Clinton through
7332-574: The New York and New England Railroad to fulfill his plan, electing himself president of the B&M on October 26. Early in 1893 the P&;R went bankrupt and McLeod lost stock control of the B&M, resigning as president on May 23. With relatively stable local control restored the B&M was able to lease one of its major competitors, the Fitchburg Railroad, in 1900. Two years later, on February 20, 1902,
7488-711: The Poughkeepsie Bridge over the Hudson River at Poughkeepsie, New York completed the Poughkeepsie Bridge Route , the first all-rail route between New England and points south of New York City. Trains such as the Philadelphia and Washington Express and the Harrisburg Express traveled over the several railroads that composed the route, including the Central Massachusetts Branch of the B&M. With
7644-671: The United Kingdom at the beginning of the 19th century. The first passenger railway, the Stockton and Darlington Railway , opened in 1825. The quick spread of railways throughout Europe and North America, following the 1830 opening of the first intercity connection in England, was a key component of the Industrial Revolution . The adoption of rail transport lowered shipping costs compared to water transport, leading to "national markets" in which prices varied less from city to city. In
7800-609: The United Kingdom , South Korea , Scandinavia, Belgium and the Netherlands. The construction of many of these lines has resulted in the dramatic decline of short-haul flights and automotive traffic between connected cities, such as the London–Paris–Brussels corridor, Madrid–Barcelona, Milan–Rome–Naples, as well as many other major lines. High-speed trains normally operate on standard gauge tracks of continuously welded rail on grade-separated right-of-way that incorporates
7956-466: The Worcester, Nashua, and Portland Division (WN&P) main line. The next improvement was at Jefferson where the B&M rehabilitated a connecting track that split off of the Central Massachusetts Branch at Holden Junction and connected with the Worcester and Hillsboro Branch at Carr Junction to allow passenger service into Princeton , Hubbardston , Gardner , and Winchendon . Finally the B&M built
SECTION 50
#17328557375388112-533: The census of 2000, there were 6,132 people, 2,247 households, and 1,662 families residing in the town. The population density was 220.1 inhabitants per square mile (85.0/km ). There were 2,295 housing units at an average density of 82.4 per square mile (31.8/km ). The racial makeup of the town was 96.77% White , 0.51% Black or African American , 0.13% Native American , 0.96% Asian , 0.02% Pacific Islander , 0.52% from other races , and 1.09% from two or more races. Hispanic or Latino of any race were 1.21% of
8268-414: The overhead lines and the supporting infrastructure, as well as the generating station that is needed to produce electricity. Accordingly, electric traction is used on urban systems, lines with high traffic and for high-speed rail. Diesel locomotives use a diesel engine as the prime mover . The energy transmission may be either diesel–electric , diesel-mechanical or diesel–hydraulic but diesel–electric
8424-458: The puddling process in 1784. In 1783 Cort also patented the rolling process , which was 15 times faster at consolidating and shaping iron than hammering. These processes greatly lowered the cost of producing iron and rails. The next important development in iron production was hot blast developed by James Beaumont Neilson (patented 1828), which considerably reduced the amount of coke (fuel) or charcoal needed to produce pig iron. Wrought iron
8580-418: The rotary phase converter , enabling electric locomotives to use three-phase motors whilst supplied via a single overhead wire, carrying the simple industrial frequency (50 Hz) single phase AC of the high-voltage national networks. An important contribution to the wider adoption of AC traction came from SNCF of France after World War II. The company conducted trials at AC 50 Hz, and established it as
8736-679: The steam locomotive operations for scheduled passenger revenue service on the B&M took place between Boston and Clinton on the Central Massachusetts Branch. On May 5, 1956 the last steam-powered train on the line departed Clinton for Boston and shortly thereafter the railroad closed the engine house in Clinton and began using Budd self-propelled railcars for passenger service along the route. By 1958, freight and passenger business between Clinton and Boston dwindled to nearly nothing. The B&M cut all service west of Berlin early that year with only two weekday passenger trains running as far as Hudson on
8892-532: The 1880s, railway electrification began with tramways and rapid transit systems. Starting in the 1940s, steam locomotives were replaced by diesel locomotives . The first high-speed railway system was introduced in Japan in 1964, and high-speed rail lines now connect many cities in Europe , East Asia , and the eastern United States . Following some decline due to competition from cars and airplanes, rail transport has had
9048-510: The 1930s (the famous " 44-tonner " switcher was introduced in 1940) Westinghouse Electric and Baldwin collaborated to build switching locomotives starting in 1929. In 1929, the Canadian National Railways became the first North American railway to use diesels in mainline service with two units, 9000 and 9001, from Westinghouse. Although steam and diesel services reaching speeds up to 200 km/h (120 mph) were started before
9204-500: The 1960s in Europe, they were not very successful. The first electrified high-speed rail Tōkaidō Shinkansen was introduced in 1964 between Tokyo and Osaka in Japan. Since then high-speed rail transport, functioning at speeds up to and above 300 km/h (190 mph), has been built in Japan, Spain, France , Germany, Italy, the People's Republic of China, Taiwan (Republic of China),
9360-408: The 4-4-0 locomotives continued to provide the bulk of the power for passenger service with class B-14 and B-15 2-6-0 , class L-1 4-8-0 , and class A-41-f 4-4-0 locomotives mixed in for longer and freight trips. During WWII K-8-b and K-8-c class 2-8-0 locomotives worked the larger ammunition trains on the eastern end of the line. J-1 class 4-4-2 locomotives generally handled passenger service during
9516-460: The 40 km Burgdorf–Thun line , Switzerland. Italian railways were the first in the world to introduce electric traction for the entire length of a main line rather than a short section. The 106 km Valtellina line was opened on 4 September 1902, designed by Kandó and a team from the Ganz works. The electrical system was three-phase at 3 kV 15 Hz. In 1918, Kandó invented and developed
SECTION 60
#17328557375389672-521: The B&A Ware River Branch between Creamery and Barre Junction. The ICC approved the abandonments on November 7 and then the discontinuance of service on the Ware River Branch a month later on December 17. With the line officially cloven in two the B&M renamed the line between Northampton and Wheelwright as the Wheelwright Branch and retained the Central Massachusetts Branch moniker for
9828-844: The B&L on April 1, 1887, renaming the Central Massachusetts line as the Central Massachusetts Branch . The tracks reached Ware on June 27, 1887 and before the end of that year construction finished with the completion of the bridge over the Connecticut River . The first train to traverse the entire route, led by locomotive No. 238, Hudson , left Boston at 8:30 A. M. on December 12 and arrived in Northampton at 12:30 P. M. Revenue service commenced on December 19 with three daily passenger round trips between Boston and Northampton, two between Boston and Hudson, three between Boston and Wayland, and two between Ware and Northampton. Although
9984-432: The B&M outright purchased the Central Massachusetts Railroad and dissolved its corporate entity . With the Central Massachusetts Branch now a part of its system the B&M set about improving the connections between the line and the rest of its network. The first change was in Oakdale where on March 30, 1902 the railroad shut down the accident-prone yard where the Central Massachusetts Branch crossed at grade over
10140-409: The B&M suddenly such an important link into New England Archibald Angus McLeod , president of the Philadelphia and Reading Railroad (P&R), sought to use the line as part of his bid to control the coal mining traffic between eastern Pennsylvania and New England independent of the New York, New Haven and Hartford Railroad (NYNH&H). In 1892 McLeod took stock control of the B&M and of
10296-515: The B&M to route all of its trains over the Southern Division and abandon the parallel Central Massachusetts Branch tracks. The railroad pulled off a similar maneuver in January 1933, obtaining trackage rights to the Ware River Branch of the B&A. In order to maintain service to customers in Gilbertville and Wheelwright the B&M build three connections to the Ware River Branch at Barre Junction in Barre, Forest Lake Junction in Palmer, and Creamery in Hardwick. The railroad routed trains on
10452-400: The B&M took this segment of the Marlborough Branch out of service in 1974. On December 27, 1976 the B&M sold the Central Massachusetts Branch as well as its Budd RDC fleet and several other lines to the MBTA but retained the rights to freight service. Business continued to decline however, and by 1977 the B&M had to reduce service to runs as needed. That same year the railroad removed
10608-405: The B&M took up both. As of 2006 the last remaining portion of the Central Massachusetts Railroad still in revenue service is in Ware where the Massachusetts Central uses what remains of the yard in that town as well as a small section that provides access to a paper plant customer. In 1939 the B&M ended passenger service to Marlborough leaving the four daily trains between Boston and Clinton
10764-462: The Butterley Company in 1790. The first public edgeway (thus also first public railway) built was Lake Lock Rail Road in 1796. Although the primary purpose of the line was to carry coal, it also carried passengers. These two systems of constructing iron railways, the "L" plate-rail and the smooth edge-rail, continued to exist side by side until well into the early 19th century. The flanged wheel and edge-rail eventually proved its superiority and became
10920-405: The Central Massachusetts Branch along the Ware River Branch and made the sections from Creamery to Gilbertville and Wheelwright spurs , taking the tracks south of Gilbertville to Forest Lake and north of Wheelwright to Barre Junction out of service. The ICC approved the abandonments in 1941 and the B&M took up all of the abandoned tracks. To further cut costs the B&M also reduced service on
11076-416: The Central Massachusetts Branch and away from the Boston and Albany Railroad (B&A), which was controlled by William H. Vanderbilt ’s New York Central Railroad (NYC). Legal proceedings brought against Mellen by Louis D. Brandeis to break up his monopoly meant Mellen could not build the route himself so he befriended a railroad contractor from Westfield named Ralph D. Gillett and made him president of
11232-476: The Central Massachusetts Branch as well as NYNH&H traffic heading between Worcester and Fitchburg along the tracks of the original Fitchburg and Worcester Railroad . In 1907 Charles Sanger Mellen , the president of the NYNH&H and protégé of J. P. Morgan , gained control of the B&M to form a near monopoly on all rail traffic in southern New England. Mellen sought to build a direct route through Springfield that would funnel traffic into Boston along
11388-463: The Central Massachusetts Branch track between Hill Crossing and North Cambridge Junction to make room for the MBTA's Red Line . In 1983 Guilford Rail System purchased the B&M and began to transfer all operations to the B&M subsidiary Springfield Terminal Railway . The Springfield Terminal took over operations on the last piece of the Central Massachusetts Branch between Clematis Brook and Bacon Street in Waltham in 1987 and continued them until
11544-596: The Central Massachusetts Branch, discontinuing passenger service to Northampton on April 23, 1932. In 1943 the B&M abandoned the Marlborough Branch between its original connection with the Fitchburg Division in South Acton through Maynard and Stow to Gleason Junction, making the Central Massachusetts Branch the exclusive route into Marlborough. By 1938 most of the traffic on the Central Massachusetts Branch
11700-581: The Central Massachusetts Branch. To keep the line open but defray some of the operation and maintenance costs the B&M obtained trackage rights to the Central Vermont Railway 's Southern Division in 1931, which ran parallel to the Central Massachusetts Branch for several miles between Belchertown and Amherst. Connections at Canal Junction in Belchertown and at Norwottuck Junction in Amherst allowed
11856-609: The Central Massachusetts Railroad changed many times over the line's history thanks to leases, ownership changes, and rerouting. The list below is from the 1920 Boston and Maine Southern Division employees' timetable. The listings with grayed-out backgrounds are the stations between West Berlin Junction and Oakdale that the railroad abandoned during the construction of the Wachusett Reservoir. The italicized mileage numbers for these stations indicate their position on
12012-528: The Central Massachusetts Railroad never grew beyond Northampton as its early backers had hoped it nonetheless became an integral link for the B&M to points west and south . This was primarily due to the fact that no rail bridges spanned the North River in New York City , separating New England from major metropolitan areas such as Philadelphia , Baltimore , and Washington, D. C. In 1889 construction of
12168-497: The Central Massachusetts route in the fall of 1885 with service resuming from Boston to Hudson on September 28 and to Jefferson on December 14. The new schedule included seven daily round trips from Boston to Jefferson and another ten to Waltham. The B&L formally leased the Central Massachusetts on December 7, 1886, resuming work on the route to Northampton but abandoning any plans for branches to Holyoke or West Deerfield. Though considerable grading work had already been done along
12324-511: The DC motors of the time and could not be mounted in underfloor bogies : they could only be carried within locomotive bodies. In 1894, Hungarian engineer Kálmán Kandó developed a new type 3-phase asynchronous electric drive motors and generators for electric locomotives. Kandó's early 1894 designs were first applied in a short three-phase AC tramway in Évian-les-Bains (France), which was constructed between 1896 and 1898. In 1896, Oerlikon installed
12480-490: The General Court to form a precinct within the Town of Hadley. This petition was granted on July 4, 1732, creating Hadley's South Precinct. In 1753, the precinct was granted district status. From 1751 through 1761, the district was deadlocked over whether to build a new meetinghouse west of Cold Hill, in present-day South Hadley, or to its east, in present-day Granby. In the Summer of 1761, the district's west side began constructing
12636-476: The Hampden and Mellen's empire marked the beginning of the downturn of the Central Massachusetts Branch. Much of the traffic routed through Northampton under Mellen's empire vanished or was rerouted by the B&M along the parallel Fitchburg Division via Mechanicville . In August 1917 the B&M discontinued passenger service between Ware and Northampton and downsized the terminal in Ware significantly. The line enjoyed
12792-496: The Marlborough Branch. On August 11 the railroad removed all track between Berlin and Clinton Junction, including East Switch, from service. The viaduct in Clinton remained in place until 1974 when the Metropolitan District Commission removed it. On June 14, 1959, the B&M further cut passenger service to Hudson back to one daily round trip, after attempting to abandon all service on the line. In 1959,
12948-606: The Massachusetts Central Railroad. In 1887 the locomotive became B&L No. 65, Marlboro , and later that year it became B&M No. 365, Marlboro . Manchester Locomotive Works rebuilt the locomotive in 1904 and the B&M renumbered it No. 683 in 1911, scrapping it before 1923. Prior to its time with the Massachusetts Central Railroad Locomotive No. 5 was No. 11, N. C. Munson , of the N. C. Munson Construction Company (incidentally
13104-623: The Massachusetts General Court amended the railroad's charter to allow for several new expansions. The most significant was an extension east through Waltham and Belmont, which eliminated the connection with the Fitchburg at Stony Brook. From Beaver Brook to Hill Crossing, the line ran alongside the Fitchburg. Original plans called for the route to briefly parallel the Lexington Branch cutoff through North Cambridge and terminate at
13260-515: The NYNH&H discontinued passenger service on its lines in the former Old Colony Railroad network, triggering calls for state intervention. In response, the Mass Transportation Commission tested fare and service levels throughout the NYNH&H and B&M systems, concluding that commuter rail service was important enough to warrant continued operation, but was unlikely to be financially self-sustaining. Based on this conclusion,
13416-405: The average family size was 3.15. In the town, the population was spread out, with 25.5% under the age of 18, 7.0% from 18 to 24, 30.6% from 25 to 44, 25.2% from 45 to 64, and 11.7% who were 65 years of age or older. The median age was 38 years. For every 100 females, there were 96.0 males. For every 100 females age 18 and over, there were 94.3 males. The median income for a household in the town
13572-554: The bridges have been restored or are funded for restoration as part of the Mass Central Rail Trail—Wayside . In 1996 the towns along the eastern portion of the Central Massachusetts Branch requested permission to convert the route between Clematis Brook and Berlin into what was then proposed as the Wayside Rail Trail . The MBTA agreed to lease the property for the project with the stipulation that it would retain
13728-480: The bunker with inbound ammunition from Boston being dropped in a yard just north of Mirror Lake Junction and outbound ammunition being brought to the NYNH&H in South Sudbury. This business ended with the war as the government repurposed the facility and removed the yard and connection to the Central Massachusetts Branch. Further east the B&M worked with the state and other railroads to modernize and streamline
13884-430: The duty of a guard/train manager/conductor . Passenger trains are part of public transport and often make up the stem of the service, with buses feeding to stations. Passenger trains provide long-distance intercity travel, daily commuter trips, or local urban transit services, operating with a diversity of vehicles, operating speeds, right-of-way requirements, and service frequency. Service frequencies are often expressed as
14040-599: The east the stockholders approved a 25-year lease of the Massachusetts Central to the B&L on March 21, 1880 pending its completion within two years. The first rails were finally laid in October that same year at the junction with the Framingham and Lowell Railroad in South Sudbury. The route from Cambridge to Hudson was complete by August 20, 1881 and inspected by state and company officials on September 21. Satisfied with
14196-624: The eastern half of the line between Boston and Oakdale. On the Wheelwright Branch freight service continued between Northampton and Wheelwright at least three times per week until 1973 when the paper mill in Wheelwright closed. In April 1974 the B&M cut freight service to once per week, took the tracks between Creamery and Wheelwright out of service, and embargoed all traffic on the line east of Bondsville. With only one customer in Bondsville
14352-402: The end of the 19th century, because they were cleaner compared to steam-driven trams which caused smoke in city streets. In 1784 James Watt , a Scottish inventor and mechanical engineer, patented a design for a steam locomotive . Watt had improved the steam engine of Thomas Newcomen , hitherto used to pump water out of mines, and developed a reciprocating engine in 1769 capable of powering
14508-467: The end of the 19th century, improving the quality of steel and further reducing costs. Thus steel completely replaced the use of iron in rails, becoming standard for all railways. The first passenger horsecar or tram , Swansea and Mumbles Railway , was opened between Swansea and Mumbles in Wales in 1807. Horses remained the preferable mode for tram transport even after the arrival of steam engines until
14664-515: The engine by one power stroke. The transmission system employed a large flywheel to even out the action of the piston rod. On 21 February 1804, the world's first steam-powered railway journey took place when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren ironworks, near Merthyr Tydfil in South Wales . Trevithick later demonstrated a locomotive operating upon
14820-470: The era of great expansion of railways that began in the late 1860s. Steel rails lasted several times longer than iron. Steel rails made heavier locomotives possible, allowing for longer trains and improving the productivity of railroads. The Bessemer process introduced nitrogen into the steel, which caused the steel to become brittle with age. The open hearth furnace began to replace the Bessemer process near
14976-515: The first commercial example of the system on the Lugano Tramway . Each 30-tonne locomotive had two 110 kW (150 hp) motors run by three-phase 750 V 40 Hz fed from double overhead lines. Three-phase motors run at a constant speed and provide regenerative braking , and are well suited to steeply graded routes, and the first main-line three-phase locomotives were supplied by Brown (by then in partnership with Walter Boveri ) in 1899 on
15132-583: The highest possible radius. All these features are dramatically different from freight operations, thus justifying exclusive high-speed rail lines if it is economically feasible. Granby, Massachusetts Granby is a town in Hampshire County, Massachusetts , United States. The population was 6,110 at the 2020 census . It is part of the Springfield, Massachusetts Metropolitan Statistical Area . The census-designated place of Granby corresponds to
15288-509: The increase in traffic the railroad took up the tracks of the Central Massachusetts Branch tracks between Clematis Brook and Hill Crossing. The remaining track between Hill Crossing and North Cambridge Junction became a part of the Freight Cutoff to the yards in Boston. Around the same time the B&M also modernized its motive power, adopting diesel locomotives throughout its system. The last of
15444-422: The intersection of US 20 and Andrew Ave in Wayland. In Sudbury and Hudson, a 7.6 mile paved section is under construction in partnership between DCR and Eversource's buried power line project, with an estimated completion in 2026. Efforts to convert the property to recreational trails also found success elsewhere along the route. The portion of the Marlborough Branch between Gleason Junction and Marlborough became
15600-434: The last customer shut down in 1994. In 1996 State Representative Nancy Evans of Wayland proposed restoring commuter service on the Central Massachusetts Branch between Interstate 495 in Berlin and Boston to alleviate traffic on Route 20 but was met with substantial backlash from residents of new homes built along the dormant line in the time since its operations had ceased. The Executive Office of Transportation carried out
15756-646: The last of the passenger service on the Central Massachusetts Branch. Freight service, however, continued to all three communities and saw a major uptick as World War II intensified. In 1942 the United States Government built the Fort Devens-Sudbury Training Annex which connected to the Central Massachusetts Branch at Mirror Lake Junction just east of Ordway station in Hudson. B&M trains transported huge quantities of ammunition to and from
15912-1218: The limit being regarded at 200 to 350 kilometres per hour (120 to 220 mph). High-speed trains are used mostly for long-haul service and most systems are in Western Europe and East Asia. Magnetic levitation trains such as the Shanghai maglev train use under-riding magnets which attract themselves upward towards the underside of a guideway and this line has achieved somewhat higher peak speeds in day-to-day operation than conventional high-speed railways, although only over short distances. Due to their heightened speeds, route alignments for high-speed rail tend to have broader curves than conventional railways, but may have steeper grades that are more easily climbed by trains with large kinetic energy. High kinetic energy translates to higher horsepower-to-ton ratios (e.g. 20 horsepower per short ton or 16 kilowatts per tonne); this allows trains to accelerate and maintain higher speeds and negotiate steep grades as momentum builds up and recovered in downgrades (reducing cut and fill and tunnelling requirements). Since lateral forces act on curves, curvatures are designed with
16068-520: The line at Coldbrook and knocked out a bridge in Gilbertville. The B&M could not justify the cost to make repairs to an area it was hardly using and so on January 30, 1939 the railroad formally submitted a request to the ICC to abandon the Central Massachusetts Branch tracks between Oakdale and Barre Junction, abandon the B&A Ware River tracks between Creamery and Gilbertville, and discontinue operations on
16224-651: The line in the 1892 employees' timetable. Railroad Rail transport (also known as train transport ) is a means of transport using wheeled vehicles running in tracks , which usually consist of two parallel steel rails . Rail transport is one of the two primary means of land transport , next to road transport . It is used for about 8% of passenger and freight transport globally, thanks to its energy efficiency and potentially high speed . Rolling stock on rails generally encounters lower frictional resistance than rubber-tyred road vehicles, allowing rail cars to be coupled into longer trains . Power
16380-567: The locomotive in 1881 then sold it to the St. Johnsbury and Lake Champlain Railroad (SJ&LC) in 1883 where it became No. 11, Col. Jewett . The locomotive became a part of the B&L following its merger with the SJ&;LC in 1885. The B&L renumbered it as No. 163, Highgate . The locomotive returned to the SJ&LC 1887 when the B&M leased the B&L and became No. 8, Highgate . The SJ&LC scrapped
16536-553: The locomotive in 1895, renumbering it as No. 629 and then No. 555 on February 29, 1904. The B&M scrapped the locomotive on March 20, 1907. Schenectady Locomotive Works built locomotive No. 3 for the Massachusetts Central Railroad. In 1887 the locomotive became B&L No. 10, Woburn , and later that year it became B&M No. 310, Woburn . The B&M rebuilt the locomotive in 1898 and renumbered it No. 680 in 1911 before scrapping it in August 1920. Schenectady built locomotive No. 4 for
16692-627: The locomotive in May 1892. Rogers built locomotive No. 2 for the IB&;W as their No. 71. In 1880 the IB&W returned the locomotive to Rogers which sold it to the Housatonic as their No. 22. The Massachusetts Central Railroad purchased the locomotive in 1881 then sold it to the SJ&LC in 1883 where it became No. 12, Col. Fairbanks . The locomotive became a part of the B&L in 1887, which renumbered it as No. 164, Col. Fairbanks . The B&M took possession of
16848-429: The locomotive-hauled train's drawbacks to be removed, since the locomotive need not be moved to the front of the train each time the train changes direction. A railroad car is a vehicle used for the haulage of either passengers or freight. A multiple unit has powered wheels throughout the whole train. These are used for rapid transit and tram systems, as well as many both short- and long-haul passenger trains. A railcar
17004-512: The main portion of the B&O to the new line to New York through a series of tunnels around the edges of Baltimore's downtown. Electricity quickly became the power supply of choice for subways, abetted by the Sprague's invention of multiple-unit train control in 1897. By the early 1900s most street railways were electrified. The London Underground , the world's oldest underground railway, opened in 1863, and it began operating electric services using
17160-611: The main village of Granby in the center of the town. The town is named in honor of John Manners, Marquess of Granby , a hero of the Seven Years' War . The place name, Granby, refers to a village in Nottinghamshire , taking its name from the personal name Gráni and the Old English suffix bȳ , denoting a farmstead or settlement. Granby was once part of Hadley , as were other towns, as part of Hadley Equivalent Lands . Old Hadley
17316-433: The mid-1920s. The Soviet Union operated three experimental units of different designs since late 1925, though only one of them (the E el-2 ) proved technically viable. A significant breakthrough occurred in 1914, when Hermann Lemp , a General Electric electrical engineer, developed and patented a reliable direct current electrical control system (subsequent improvements were also patented by Lemp). Lemp's design used
17472-468: The new route emerged. The first proposal called for a connection to the defunct Lancaster Railroad in Hudson that would route traffic through Bolton to a connection with the WN&P Division main line in South Lancaster and leave Berlin at the end of a four-mile branch . The second proposal would build a new route through Clinton and connect with the WN&P Division main line there. On April 3, 1902
17628-412: The noise they made on the tracks. There are many references to their use in central Europe in the 16th century. Such a transport system was later used by German miners at Caldbeck , Cumbria , England, perhaps from the 1560s. A wagonway was built at Prescot , near Liverpool , sometime around 1600, possibly as early as 1594. Owned by Philip Layton, the line carried coal from a pit near Prescot Hall to
17784-418: The northeast railroads into Conrail . The ICC approved the plan and operations east of Amherst ceased by August and on the rest of the line by November. On February 14, 1980 the B&M officially took line from Northampton to Norwottuck out of service. Later that month the Massachusetts Central assumed responsibility for the customer in Bondsville but had to stop after about a year due to the poor condition of
17940-404: The old track was officially removed from through service on June 15 but remained in place and used during the remainder of the reservoir construction, some of it being re-gauged to 3' to allow construction trains to utilize it. Under this arrangement the WN&P main line between Oakdale and Sterling Junction became exceptionally busy as it accommodated B&M traffic from the WN&P Division and
18096-536: The only five locomotives that the company ever owned with other railroads providing motive power later in the line's history. Rogers Locomotive and Machine Works built locomotive No. 1 for the Indiana, Bloomington and Western Railway (IB&W) as their No. 70. In 1880 the IB&W returned the locomotive to Rogers which sold it to the Housatonic Railroad as their No. 21. The Massachusetts Central Railroad purchased
18252-413: The original Central Massachusetts Branch. Just before Clinton Junction an additional connection branched off at Reservoir Switch leading to East Switch on the WN&P Division to allow traffic to approach the Central Massachusetts Branch from the north or continue from the Central Massachusetts Branch north along the WN&P Division main line. The first train passed over the new route on June 2, 1903 while
18408-486: The original contractor for the Massachusetts Central Railroad). It was sold to the Massachusetts Central around 1882 and sold at auction in 1886. In addition to the above locomotives the Massachusetts Central Railroad would on occasion lease power from the B&L. Small 4-4-0, 4-6-0 , and 0-4-0 locomotives predominated through 1900 partially due to weight restrictions over the line's bridges. After 1900
18564-759: The original planned route in Hardwick , Greenwich , and Enfield the railroad's leadership decided to redirect the route through an easier terrain in the Ware River Valley, taking the line into Palmer and reconnecting with the original route in Belchertown. This turned out to be a fortuitous decision given that much of the disused portion of the line was flooded in the 1930s to construct the Quabbin Reservoir . Tracks were installed through Muschopauge in Rutland by November. The Boston and Maine Railroad (B&M) leased
18720-409: The population. There were 2,247 households, out of which 34.5% had children under the age of 18 living with them, 62.8% were married couples living together, 8.2% had a female householder with no husband present, and 26.0% were non-families. Of all households, 20.1% were made up of individuals, and 7.9% had someone living alone who was 65 years of age or older. The average household size was 2.71 and
18876-513: The possibility of a smaller engine that might be used to power a vehicle. Following his patent, Watt's employee William Murdoch produced a working model of a self-propelled steam carriage in that year. The first full-scale working railway steam locomotive was built in the United Kingdom in 1804 by Richard Trevithick , a British engineer born in Cornwall . This used high-pressure steam to drive
19032-474: The possibility of restoring passenger service to the line in 1972 and again in 1975, but neither study led to the resumption of passenger service. Despite the end of passenger service on the Central Massachusetts Branch freight service continued well into the 1970s. Trains ran to South Sudbury 3–4 times each week and traveled as far as Hudson when needed, usually 1–2 times per week. With no business in Marlborough
19188-433: The public. Other structures such as engine houses , water towers, section houses , and crossing shanties were not decorated. To create the illusion of variety the railroad never used the same design on two consecutive stations except at Waverly and Belmont where the consistent design helped passengers distinguish the Central Massachusetts Railroad stations from those of the parallel Fitchburg Railroad. The station listing on
19344-474: The rail infrastructure in and around Boston between 1951 and 1952. Rather than have the Central Massachusetts Branch and Fitchburg Division run parallel to one another from Clematis Brook to their connection at Fens in Cambridge, the B&M decided to connect the two lines at Clematis Brook and route all Central Massachusetts Branch traffic onto the Fitchburg Division. After upgrading the Fitchburg Division to handle
19500-494: The railroad in April 1871, but two years later the Panic of 1873 forced Munson into bankruptcy and halted construction. The railroad stagnated until June 5, 1878 when new president Silas Seymour called a stockholders meeting. The stockholders elected a new Board of Directors which appointed George S. Boutwell president in 1879 and rehired Munson to resume construction. That same year,
19656-514: The railroad petitioned the ICC to abandon the remainder of the Wheelwright Branch in June 1979, reasoning that that business could be better served by the new Massachusetts Central Railroad which the General Court had chartered on October 16, 1975 to run along the Ware River Secondary of the bankrupt Penn Central Railroad after that line was to be excluded from the government's reorganization of
19812-465: The right to revert it to a commuter rail line and that the trail would be policed and maintained by the communities themselves. Every town along the route except for Weston accepted the terms but without unanimous approval the trail took a while to come to fruition. Waltham moved ahead to convert the property in their city anyway reasoning that even if service were restored it would start from a new connection at Stony Brook west of their city limits. In 2010,
19968-504: The selling agents for the company's bonds, Boston-based Charles A. Sweet and Co., declared bankruptcy. The railroad ceased operations and construction on May 16 and remained in limbo for the next 29 months. To restore service to the line the Central Massachusetts Railroad was formed out of the failed Massachusetts Central Railroad Company on November 10, 1883. The directors contracted with the B&L to operate trains over
20124-425: The single train along the route was too inconvenient for commuters and so on October 1 the MBTA announced that it would temporarily schedule more trains to determine whether the line was still viable. After two months, the MBTA concluded that the modest increase in ridership was not sufficient to warrant continued funding; on November 26, all passenger service ended on the Central Massachusetts Branch. The MBTA examined
20280-528: The south branch of the Nashua River for the construction of the Wachusett Reservoir , flooding roughly 4,000 acres (1,600 ha) of land in the towns of Clinton, Boylston , and West Boylston. The Central Massachusetts Branch needed to be rerouted as the new reservoir would cover 7.01 miles (11.28 km) of track as well as the stations at South Clinton, Boylston, and West Boylston. Two proposals for
20436-441: The standard for railways. Cast iron used in rails proved unsatisfactory because it was brittle and broke under heavy loads. The wrought iron invented by John Birkinshaw in 1820 replaced cast iron. Wrought iron, usually simply referred to as "iron", was a ductile material that could undergo considerable deformation before breaking, making it more suitable for iron rails. But iron was expensive to produce until Henry Cort patented
20592-573: The state created the Massachusetts Bay Transportation Authority (MBTA) on August 3, 1964 and merged it with the existing Metropolitan Transportation Authority to serve a larger part of the state and subsidize commuter rail service. The MBTA immediately set to work optimizing the commuter rail networks of the NYNH&H, NYC, and B&M. On the Central Massachusetts Branch, this included cutting passenger service back to South Sudbury starting on January 18, 1965. In spite of
20748-604: The state purchased 10 miles of the line between the west end of the Connecticut River Bridge in Northampton and Amherst with the intent to convert it into a rail trail. Work began in 1992 and on July 29, 1993 the Massachusetts Department of Environmental Management officially opened the Norwottuck Branch Rail Trail . By 1997 the trail extended as far as Belchertown where progress halted due to
20904-478: The subsidies, ridership continued to decline on the Central Massachusetts Branch, and by 1969 the MBTA recommended an end to all service on the line. Devoted riders managed to briefly delay the decision, but in December 1970 the B&M filed for bankruptcy. On July 30, 1971, the state renewed the B&M's annual subsidy but without funding for the Central Massachusetts Branch. A group of citizens from Wayland argued that
21060-470: The time, was Liverpool and Manchester Railway , built in 1830. Steam power continued to be the dominant power system in railways around the world for more than a century. The first known electric locomotive was built in 1837 by chemist Robert Davidson of Aberdeen in Scotland, and it was powered by galvanic cells (batteries). Thus it was also the earliest battery-electric locomotive. Davidson later built
21216-428: The track between Berlin and Hudson from service as it had deteriorated to the point of being unsafe. In August 1979 the B&M petitioned the ICC to abandon the Central Massachusetts Branch between Berlin and Waltham North Station and the remaining segment of the Marlborough Branch. The last train to Hudson ran on June 19, 1980 and the last train west of Waltham about a month later on August 14. The B&M officially took
21372-549: The track west of Bacon Street in Waltham out of service on September 11 and the United States District Court overseeing the B&M's bankruptcy instead approved a permanent discontinuance in October. Around the same time the B&M and MBTA increased vertical height clearances along the New Hampshire Route main line. This made the Hill Crossing Freight Cutoff obsolete and in 1980 the B&M and MBTA took up
21528-536: The track. Propulsion for the train is provided by a separate locomotive or from individual motors in self-propelled multiple units. Most trains carry a revenue load, although non-revenue cars exist for the railway's own use, such as for maintenance-of-way purposes. The engine driver (engineer in North America) controls the locomotive or other power cars, although people movers and some rapid transits are under automatic control. Traditionally, trains are pulled using
21684-473: The tracks. The ICC finally approved the abandonment of the Wheelwright Branch in 1982 and the B&M took up the tracks between Northampton and Norwottuck later that year. This left only two sections of B&M-owned track on the Wheelwright Branch: between Canal Junction and Bondsville and between Creamery and Wheelwright. The Massachusetts Central could not afford to acquire either property and so in 1983
21840-466: The transport of ore tubs to and from mines and soon became popular in Europe. Such an operation was illustrated in Germany in 1556 by Georgius Agricola in his work De re metallica . This line used "Hund" carts with unflanged wheels running on wooden planks and a vertical pin on the truck fitting into the gap between the planks to keep it going the right way. The miners called the wagons Hunde ("dogs") from
21996-545: The war and into the 1950s. Diesel power arrived in the mid-1950s with EMD SW9 switchers regularly assigned to the Marlborough local freight starting in June 1953. Road switchers equipped with steam generators took over passenger service on the Central Massachusetts Branch starting in 1956. Budd Rail Diesel Cars quickly replaced the road switchers for passenger service beginning in the late 1950s and continued service in that capacity until passenger service ceased in 1971. The Central Massachusetts Railroad built its stations in
22152-609: The wheels on track. For example, evidence indicates that a 6 to 8.5 km long Diolkos paved trackway transported boats across the Isthmus of Corinth in Greece from around 600 BC. The Diolkos was in use for over 650 years, until at least the 1st century AD. Paved trackways were also later built in Roman Egypt . In 1515, Cardinal Matthäus Lang wrote a description of the Reisszug ,
22308-451: The work the officials set the railroad's grand opening for October 1, 1881. The company appointed Munson as general manager and purchased five locomotives. The first schedule included four passenger round trips from Boston to Hudson, four passenger round trips from Boston to Waltham, and a daily freight from Boston to Hudson and back. Meanwhile, westward construction continued with tracks reaching Oakdale and Jefferson by June 1882. In 1883
22464-601: The world in 1825, although it used both horse power and steam power on different runs. In 1829, he built the locomotive Rocket , which entered in and won the Rainhill Trials . This success led to Stephenson establishing his company as the pre-eminent builder of steam locomotives for railways in Great Britain and Ireland, the United States, and much of Europe. The first public railway which used only steam locomotives, all
22620-563: Was $ 54,293, and the median income for a family was $ 57,632. Males had a median income of $ 40,833 versus $ 30,597 for females. The per capita income for the town was $ 23,209. About 1.0% of families and 2.2% of the population were below the poverty line , including 2.8% of those under age 18 and 2.0% of those age 65 or over. Granby has one public elementary school serving K–6, the East Meadow School. Middle/High School students attend Granby Junior Senior High School . The MacDuffie School ,
22776-507: Was a soft material that contained slag or dross . The softness and dross tended to make iron rails distort and delaminate and they lasted less than 10 years. Sometimes they lasted as little as one year under high traffic. All these developments in the production of iron eventually led to the replacement of composite wood/iron rails with superior all-iron rails. The introduction of the Bessemer process , enabling steel to be made inexpensively, led to
22932-585: Was accomplished by the distribution of weight between a number of wheels. Puffing Billy is now on display in the Science Museum in London, and is the oldest locomotive in existence. In 1814, George Stephenson , inspired by the early locomotives of Trevithick, Murray and Hedley, persuaded the manager of the Killingworth colliery where he worked to allow him to build a steam-powered machine. Stephenson played
23088-509: Was built by Siemens. The tram ran on 180 volts DC, which was supplied by running rails. In 1891 the track was equipped with an overhead wire and the line was extended to Berlin-Lichterfelde West station . The Volk's Electric Railway opened in 1883 in Brighton , England. The railway is still operational, thus making it the oldest operational electric railway in the world. Also in 1883, Mödling and Hinterbrühl Tram opened near Vienna in Austria. It
23244-687: Was built in 1758, later became the world's oldest operational railway (other than funiculars), albeit now in an upgraded form. In 1764, the first railway in the Americas was built in Lewiston, New York . In the late 1760s, the Coalbrookdale Company began to fix plates of cast iron to the upper surface of the wooden rails. This allowed a variation of gauge to be used. At first only balloon loops could be used for turning, but later, movable points were taken into use that allowed for switching. A system
23400-440: Was east of Clinton. The only business on the western end of the line was local freight service between Northampton and Rutland. Since no trains passed over the middle of the route the B&M took the tracks between Oakdale and Muschopauge out of service on June 1, 1938. Later that year on September 21 the Hurricane of 1938 badly damaged the tracks, particularly near the Quinapoxet , Ware, and Swift Rivers where washouts severed
23556-448: Was first settled in 1659 by people from Hartford and Wethersfield, Connecticut . These settlers left Connecticut because of religious differences within their communities. John Pynchon was commissioned to buy wilderness land for their new community. In 1658, Pynchon negotiated a deed with three Norwottuck sachems : Chickwalloppe (alias Wawhillowa), Umpanchela (alias Womscom), and Quonquont (alias Wompshaw). The deed reserved land for
23712-425: Was introduced in which unflanged wheels ran on L-shaped metal plates, which came to be known as plateways . John Curr , a Sheffield colliery manager, invented this flanged rail in 1787, though the exact date of this is disputed. The plate rail was taken up by Benjamin Outram for wagonways serving his canals, manufacturing them at his Butterley ironworks . In 1803, William Jessop opened the Surrey Iron Railway ,
23868-415: Was light enough to not break the edge-rails track and solved the problem of adhesion by a cog-wheel using teeth cast on the side of one of the rails. Thus it was also the first rack railway . This was followed in 1813 by the locomotive Puffing Billy built by Christopher Blackett and William Hedley for the Wylam Colliery Railway, the first successful locomotive running by adhesion only. This
24024-536: Was tested on the Edinburgh and Glasgow Railway in September of the following year, but the limited power from batteries prevented its general use. It was destroyed by railway workers, who saw it as a threat to their job security. By the middle of the nineteenth century most european countries had military uses for railways. Werner von Siemens demonstrated an electric railway in 1879 in Berlin. The world's first electric tram line, Gross-Lichterfelde Tramway , opened in Lichterfelde near Berlin , Germany, in 1881. It
24180-423: Was the first tram line in the world in regular service powered from an overhead line. Five years later, in the U.S. electric trolleys were pioneered in 1888 on the Richmond Union Passenger Railway , using equipment designed by Frank J. Sprague . The first use of electrification on a main line was on a four-mile section of the Baltimore Belt Line of the Baltimore and Ohio Railroad (B&O) in 1895 connecting
24336-409: Was transferred to the settlers and Awonunsk and her family were paid in 150 fathoms of wampum (approximately 54,000 wampum beads), 10 coats, and 2 yards of cloth, among other items. The deed also promised rights for the Norwottuck to hunt, fish, collect wood, and set up wigwams on the commons. Granby was settled in 1727. In November 1727, residents of what are now South Hadley and Granby petitioned
#537462