Misplaced Pages

#980019

100-479: In 1972, at age 18, Bob Taylor began working at a guitar-making shop owned by Sam Radding called American Dream, where Kurt Listug was already an employee. When Radding sold the business in 1974, Taylor, Listug, and a third employee, Steve Schemmer, bought American Dream and renamed it the Westland Music Company. Needing a more compact logo suitable for the guitars' headstock , the founders decided to change

200-620: A pegbox in the violin family . At the "tail" of the instrument the strings are usually held by a tailpiece or bridge. Machine heads on the headstock are commonly used to tune the instrument by adjusting the tension of strings and, consequently, the pitch of sound they produce. Two traditional layouts of guitar tuners are called "3+3" (3 top tuners and 3 bottom ones) and "6 in line" tuners, though many other combinations are known, especially for bass guitars and non-6-string guitars. When there are no machine heads (i.e. tuners are not needed or located in some other place, for example, on guitar body),

300-459: A pickup and amplifier that made the instrument loud enough to be heard, but also enabled manufacturing guitars with a solid block of wood needing a resonant chamber. A wide array of electronic effects units became possible including reverb and distortion (or "overdrive") . Solid-body guitars began to dominate the guitar market during the 1960s and 1970s; they are less prone to unwanted acoustic feedback . As with acoustic guitars, there are

400-484: A resonating chamber . The classical Spanish guitar is often played as a solo instrument using a comprehensive fingerstyle technique where each string is plucked individually by the player's fingers, as opposed to being strummed. The term "finger-picking" can also refer to a specific tradition of folk, blues, bluegrass, and country guitar playing in the United States. Electric guitars , first patented in 1937, use

500-402: A "bass") is similar in appearance and construction to an electric guitar, but with a longer neck and scale length , and four to six strings. The four-string bass, by far the most common, is usually tuned the same as the double bass , which corresponds to pitches one octave lower than the four lowest pitched strings of a guitar (E, A, D, and G). The bass guitar is a transposing instrument , as it

600-435: A "matched headstock" varies between manufacturers and players - for example, the headstocks of Gibson guitars are nearly always black, and it is debatable whether a black-bodied Gibson has a matching headstock. Generally, a guitar is only considered to have a matching headstock if the guitar is usually produced without matching body and headstock finishes. Guitar The guitar is a stringed musical instrument that

700-413: A 12-string guitar, allowing him to incorporate chiming 12-string elements in standard six-string playing. In 1982 Uli Jon Roth developed the "Sky Guitar", with a vastly extended number of frets, which was the first guitar to venture into the upper registers of the violin. Roth's seven-string and "Mighty Wing" guitar features a wider octave range. The bass guitar (also called an "electric bass", or simply

800-402: A chordophone, and clay plaques from Babylonia show people playing a lute-like instrument which is similar to the guitar. Several scholars cite varying influences as antecedents to the modern guitar. Although the development of the earliest "guitar" is lost to the history of medieval Spain, two instruments are commonly claimed as influential predecessors: the four-string oud and its precursor,

900-440: A filler strip running down the length and behind the neck, used for strength or to fill the cavity through which the truss rod was installed in the neck. In acoustic guitars, string vibration is transmitted through the bridge and saddle to the body via sound board . The sound board is typically made of tonewoods such as spruce or cedar. Timbers for tonewoods are chosen for both strength and ability to transfer mechanical energy from

1000-469: A four-part tour of the Taylor Factory, narrated by Bob Taylor, in 2008. Headstock A headstock or peghead is part of a guitar or similar stringed instruments such as a lute , mandolin , banjo , ukulele and others of the lute lineage. The main function of a headstock is to house the tuning pegs or other mechanism that holds the strings at the "head" of the instrument; it corresponds to

1100-427: A guitar with one finger (the bar). Known for its portamento capabilities, gliding smoothly over every pitch between notes, the instrument can produce a sinuous crying sound and deep vibrato emulating the human singing voice. Typically, the strings are plucked (not strummed) by the fingers of the dominant hand, while the steel tone bar is pressed lightly against the strings and moved by the opposite hand. The instrument

SECTION 10

#1732855804981

1200-442: A headstock for purely decorative reasons. Most major guitar brands have signature headstock designs that make their guitars or guitar series easily recognizable. As seen in a section below, even "copied" at the first glance designs retain clear visible changes in dimensions, proportions of elements, etc., so it is almost always possible to tell a major brand of a guitar by looking at the headstock. On some electric guitars and basses

1300-423: A major influence on popular culture . The guitar is used in a wide variety of musical genres worldwide. It is recognized as a primary instrument in genres such as blues , bluegrass , country , flamenco , folk , jazz , jota , ska , mariachi , metal , punk , funk , reggae , rock , grunge , soul , acoustic music , disco , new wave , new age , adult contemporary music , and pop , occasionally used as

1400-408: A nondescript piece of 2x4 timber for its top, and made of neck out of pallet oak. The fretboard's Formica-and-pearl inlay depicted a fork lift. He named the resulting instrument the "Pallet Guitar", and in 2000 a limited edition of 25 Grand Auditorium-bodied Pallet Guitars were made, with aluminum inlay included to accentuate the original nail holes in the wood. These guitars were sold to collectors, but

1500-570: A number of types of electric guitars, including hollowbody guitars , archtop guitars (used in jazz guitar , blues and rockabilly ) and solid-body guitars , which are widely used in rock music . The loud, amplified sound and sonic power of the electric guitar played through a guitar amp have played a key role in the development of blues and rock music , both as an accompaniment instrument (playing riffs and chords ) and performing guitar solos , and in many rock subgenres, notably heavy metal music and punk rock . The electric guitar has had

1600-401: A resonant hollow chamber on the guitar, or amplified by an electronic pickup and an amplifier . The guitar is classified as a chordophone , meaning the sound is produced by a vibrating string stretched between two fixed points. Historically, a guitar was constructed from wood, with its strings made of catgut . Steel guitar strings were introduced near the end of the nineteenth century in

1700-402: A right-handed guitar strung in reverse (the treble strings and bass strings reversed). The problem with doing this is that it reverses the guitar's saddle angle. The saddle is the strip of material on top of the bridge where the strings rest. It is normally slanted slightly, making the bass strings longer than the treble strings. In part, the reason for this is the difference in the thickness of

1800-625: A sample in hip-hop , dubstep , or trap music . The modern word guitar and its antecedents have been applied to a wide variety of chordophones since classical times, sometimes causing confusion. The English word guitar , the German Gitarre , and the French guitare were all adopted from the Spanish guitarra , which comes from the Andalusian Arabic قيثارة ( qīthārah ) and

1900-413: A seated position and are used to play a diversity of musical styles including classical music . The classical guitar's wide, flat neck allows the musician to play scales, arpeggios, and certain chord forms more easily and with less adjacent string interference than on other styles of guitar. Flamenco guitars are very similar in construction, but they are associated with a more percussive tone. In Portugal,

2000-428: A slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action , but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz. The truss rod is a thin, strong metal rod that runs along

2100-496: A sound closer to that of an acoustic guitar with the flip of a switch or knob, rather than switching guitars. Those that combine piezoelectric pickups and magnetic pickups are sometimes known as hybrid guitars. Hybrids of acoustic and electric guitars are also common. There are also more exotic varieties, such as guitars with two , three, or rarely four necks, all manner of alternate string arrangements, fretless fingerboards (used almost exclusively on bass guitars, meant to emulate

SECTION 20

#1732855804981

2200-459: Is cited as a disadvantage of each style too: single-piece necks are more likely to break on occasional hits and are harder to repair, while glued-in necks can break with time. Apart from its main function, the headstock is an important decorative detail of a guitar. It is the place where the overwhelming majority of guitar manufacturers draw their logo . Some guitars without machine heads (for example, ones equipped with Floyd Rose SpeedLoader ) have

2300-436: Is expected to know his or her way around the instrument. In addition to fretboard inlay, the headstock and soundhole surround are also frequently inlaid. The manufacturer's logo or a small design is often inlaid into the headstock. Rosette designs vary from simple concentric circles to delicate fretwork mimicking the historic rosette of lutes. Bindings that edge the finger and soundboards are sometimes inlaid. Some instruments have

2400-404: Is glued into the corners where the rib meets the top and back. This interior reinforcement provides 5 to 20 mm of solid gluing area for these corner joints. Solid linings are often used in classical guitars, while kerfed lining is most often found in steel-string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow it to bend with

2500-413: Is notated in bass clef an octave higher than it sounds (as is the double bass) to avoid excessive ledger lines being required below the staff . Like the electric guitar, the bass guitar has pickups and it is plugged into an amplifier and speaker for live performances. Modern guitars can be constructed to suit both left- and right-handed players. Typically the dominant hand is used to pluck or strum

2600-462: Is played while sitting, placed horizontally across the player's knees or otherwise supported. The horizontal playing style is called "Hawaiian style". The twelve-string guitar usually has steel strings, and it is widely used in folk music , blues , and rock and roll . Rather than having only six strings, the 12-string guitar has six courses made up of two strings each, like a mandolin or lute . The highest two courses are tuned in unison, while

2700-411: Is strengthened by differing types of internal bracing . Many luthiers consider the top the dominant factor in determining the sound quality. The majority of the instrument's sound is heard through the vibration of the guitar top as the energy of the vibrating strings is transferred to it. The body of an acoustic guitar has a sound hole through which sound projects. The sound hole is usually a round hole in

2800-402: Is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge is located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having

2900-530: Is the point at which the neck is either bolted or glued to the body of the guitar. Almost all acoustic steel-string guitars, with the primary exception of Taylors, have glued (otherwise known as set) necks, while electric guitars are constructed using both types. Most classical guitars have a neck and headblock carved from one piece of wood, known as a "Spanish heel". Commonly used set neck joints include mortise and tenon joints (such as those used by C. F. Martin & Co.), dovetail joints (also used by C. F. Martin on

3000-528: Is tuned in the bass register. In Colombia, the traditional quartet includes a range of instruments too, from the small bandola (sometimes known as the Deleuze-Guattari, for use when traveling or in confined rooms or spaces), to the slightly larger tiple , to the full-sized classical guitar. The requinto also appears in other Latin-American countries as a complementary member of the guitar family, with its smaller size and scale, permitting more projection for

3100-548: Is used extensively in jazz , blues , R & B , and rock and roll . The first successful magnetic pickup for a guitar was invented by George Beauchamp , and incorporated into the 1931 Ro-Pat-In (later Rickenbacker ) "Frying Pan" lap steel; other manufacturers, notably Gibson , soon began to install pickups in archtop models. After World War II the completely solid-body electric was popularized by Gibson in collaboration with Les Paul , and independently by Leo Fender of Fender Music . The lower fretboard action (the height of

Taylor Guitars - Misplaced Pages Continue

3200-899: Is usually credited to the American Orville Gibson . Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired F-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings . All three principal types of resonator guitars were invented by

3300-442: Is usually fretted (with some exceptions ) and typically has six or twelve strings . It is usually held flat against the player's body and played by strumming or plucking the strings with the dominant hand, while simultaneously pressing selected strings against frets with the fingers of the opposite hand. A guitar pick may also be used to strike the strings. The sound of the guitar is projected either acoustically , by means of

3400-502: The guitarra latina (Latin guitar) and the so-called guitarra morisca (Moorish guitar). The guitarra morisca had a rounded back, a wide fingerboard, and several sound holes. The guitarra Latina had a single sound hole and a narrower neck. By the 14th century the qualifiers "moresca" or "morisca" and "latina" had been dropped, and these two chordophones were simply referred to as guitars. The Spanish vihuela , called in Italian

3500-421: The viola da mano , a guitar-like instrument of the 15th and 16th centuries, is widely considered to have been the single most important influence in the development of the baroque guitar. It had six courses (usually), lute-like tuning in fourths and a guitar-like body, although early representations reveal an instrument with a sharply cut waist. It was also larger than the contemporary four-course guitars. By

3600-424: The loudspeaker . The original purpose of the resonator was to produce a very loud sound; this purpose has been largely superseded by electrical amplification , but the resonator guitar is still played because of its distinctive tone. Resonator guitars may have either one or three resonator cones. The method of transmitting sound resonance to the cone is either a "biscuit" bridge, made of a small piece of hardwood at

3700-460: The steel-string acoustic guitar or electric guitar ; and the Hawaiian guitar (played across the player's lap). Traditional acoustic guitars include the flat top guitar (typically with a large sound hole) or the archtop guitar , which is sometimes called a " jazz guitar ". The tone of an acoustic guitar is produced by the strings' vibration, amplified by the hollow body of the guitar, which acts as

3800-538: The 16th century, the vihuela's construction had more in common with the modern guitar, with its curved one-piece ribs, than with the viols, and more like a larger version of the contemporary four-course guitars. The vihuela enjoyed only a relatively short period of popularity in Spain and Italy during an era dominated elsewhere in Europe by the lute ; the last surviving published music for the instrument appeared in 1576. Meanwhile,

3900-494: The D-28 and similar models) and Spanish heel neck joints, which are named after the shoe they resemble and commonly found in classical guitars. All three types offer stability. Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid-body electric guitars,

4000-529: The European lute ; the former was brought to Iberia by the Moors in the 8th century. It has often been assumed that the guitar is a development of the lute, or of the ancient Greek kithara. However, many scholars consider the lute an offshoot or separate line of development which did not influence the evolution of the guitar in any significant way. At least two instruments called "guitars" were in use in Spain by 1200:

4100-550: The Latin cithara , which in turn came from the Ancient Greek κιθάρα which is of uncertain ultimate origin. Kithara appears in the Bible four times (1 Cor. 14:7, Rev. 5:8, 14:2, and 15:2), and is usually translated into English as harp . The origins of the modern guitar are not known. Before the development of the electric guitar and the use of synthetic materials, a guitar

Taylor Guitars - Misplaced Pages Continue

4200-455: The Middle Ages. By the 16th century, most of the forms of guitar had fallen off, to never be seen again. However, midway through the 16th century, the five-course guitar was established. It was not a straightforward process. There were two types of five-course guitars, differing in the location of the major third and in the interval pattern. The fifth course can be inferred because the instrument

4300-540: The Slovak-American John Dopyera (1893–1988) for the National and Dobro ( Do pyera Bro thers) companies. Similar to the flat top guitar in appearance, but with a body that may be made of brass, nickel-silver, or steel as well as wood, the sound of the resonator guitar is produced by one or more aluminum resonator cones mounted in the middle of the top. The physical principle of the guitar is therefore similar to

4400-454: The Spanish guitar in Italy. Even later, in the same century, Gaspar Sanz wrote that other nations such as Italy or France added to the Spanish guitar. All of these nations even imitated the five-course guitar by "recreating" their own. Finally, c.  1850 , the form and structure of the modern guitar were developed by different Spanish makers such as Manuel de Soto y Solares and, perhaps

4500-405: The United States, but nylon and steel strings became mainstream only following World War II . The guitar's ancestors include the gittern , the vihuela , the four- course Renaissance guitar , and the five-course baroque guitar , all of which contributed to the development of the modern six-string instrument. There are three main types of modern guitar: the classical guitar (Spanish guitar);

4600-440: The abundant nature of sub-categories and its unique tonal & functional property. Acoustic guitars form several notable subcategories within the acoustic guitar group: classical and flamenco guitars ; steel-string guitars, which include the flat-topped, or "folk", guitar; twelve-string guitars ; and the arched-top guitar. The acoustic guitar group also includes unamplified guitars designed to play in different registers, such as

4700-708: The acoustic bass guitar, which has a similar tuning to that of the electric bass guitar. Renaissance and Baroque guitars are the ancestors of the modern classical and flamenco guitar . They are substantially smaller, more delicate in construction, and generate less volume. The strings are paired in courses as in a modern 12-string guitar , but they only have four or five courses of strings rather than six single strings normally used now. They were more often used as rhythm instruments in ensembles than as solo instruments, and can often be seen in that role in early music performances. ( Gaspar Sanz 's Instrucción de Música sobre la Guitarra Española of 1674 contains his whole output for

4800-410: The company became fully employee-owned. In May 2022, Andy Powers was named the new CEO, President, and Chief Guitar Designer of the company. In 1995, Bob Taylor was interested in finding out if using exotic tonewoods in quality guitars was more important than luthier techniques and good design. He built a dreadnought guitar's back and sides with oak from shipping pallets he found at the factory, used

4900-576: The company makes their lower-priced models and guitar cases. In early 2011, the company opened a Taylor distribution warehouse in the Netherlands to serve the European market. In January 2014, the U.S. State Department honored Taylor Guitars with an Award for Corporate Excellence (ACE) citing Taylor's commitment to responsible practices in obtaining ebony for its instruments, which notably included purchasing their own sustainable ebony mill and increasing its usable timber from 10% to 100%. As of January 1, 2021,

5000-465: The complex process of ungluing the neck joint. The Taylor company uses its own pickup, the "Expression System", which is a humbucking induction pickup mounted in the neck and a pair of dynamic soundboard transducers wired to an onboard preamplifier designed by Rupert Neve . The entry-level 100 and 200 series has an externally similar system known as ES-T, which uses a single under-saddle pickup and no soundboard transducers. The first-generation ES system

5100-430: The constant 17.817—an approximation to 1/(1-1/ 2 12 {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817). Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have a much thicker gauge, allowing for use of

SECTION 50

#1732855804981

5200-429: The exterior surface of a guitar, both for decoration and artistic purposes and, in the case of the markings on the 3rd, 5th, 7th and 12th fret (and in higher octaves), to provide guidance to the performer about the location of frets on the instrument. The typical locations for inlay are on the fretboard, headstock, and on acoustic guitars around the soundhole, known as the rosette . Inlays range from simple plastic dots on

5300-588: The fall of 2004. It was a custom order for the 300 and 400 series, and could be retrofitted to some older Taylor guitars with the NT neck design. Taylor's 145,000-square-foot manufacturing facility is located in El Cajon, California, about 20 miles east of downtown San Diego. A free guided tour of the Taylor Guitars factory is open to the public at 1:00 p.m., Monday through Friday except some holidays. Premier Guitars published

5400-488: The finish used on the body is also applied to the face of the headstock. Generally, matched-headstock models carry a price premium over their plain counterparts due to the extra processes involved in the finishing process. Although Fender no longer offers matched headstocks on production models made in the United States or Mexico , certain models from Fender Japan are available with matched headstocks. The definition of

5500-405: The first Pallet Guitar remains on display at the Taylor Guitars factory in El Cajon, California. In January 1999, Taylor began making guitars with a patented, bolt-on neck called the NT (new technology) neck. This differed from conventional guitar necks in using one continuous piece of wood from the headstock to the 19th fret to support the fretboard . The usual practice in guitar neck construction

5600-423: The five course guitar. A literary source, Lope de Vega's Dorotea, gives the credit to the poet and musician Vicente Espinel . This claim was also repeated by Nicolas Doizi de Velasco in 1640, however this claim has been contested by others who state that Espinel's birth year (1550) make it impossible for him to be responsible for the tradition. He believed that the tuning was the reason the instrument became known as

5700-437: The five-course baroque guitar , which was documented in Spain from the middle of the 16th century, enjoyed popularity, especially in Spain, Italy and France from the late 16th century to the mid-18th century. In Portugal, the word viola referred to the guitar, as guitarra meant the " Portuguese guitar ", a variety of cittern . There were many different plucked instruments that were being invented and used in Europe during

5800-474: The fretboard and accessible through the sound hole. Some truss rods can only be accessed by removing the neck. The truss rod counteracts the immense amount of tension the strings place on the neck, bringing the neck back to a straighter position. Turning the truss rod clockwise tightens it, counteracting the tension of the strings and straightening the neck or creating a backward bow. Turning the truss rod counter-clockwise loosens it, allowing string tension to act on

5900-616: The fretboard and located at exact points that divide the scale length in accordance with a specific mathematical formula. The exceptions include fretless bass guitars and very rare fretless guitars. Pressing a string against a fret determines the strings' vibrating length and therefore its resultant pitch. The pitch of each consecutive fret is defined at a half-step interval on the chromatic scale . Standard classical guitars have 19 frets and electric guitars between 21 and 24 frets, although guitars have been made with as many as 27 frets. Frets are laid out to accomplish an equal tempered division of

6000-448: The fretboard to intricate works of art covering the entire exterior surface of a guitar (front and back). Some guitar players have used LEDs in the fretboard to produce unique lighting effects onstage. Fretboard inlays are most commonly shaped like dots, diamond shapes, parallelograms, or large blocks in between the frets. Dots are usually inlaid into the upper edge of the fretboard in the same positions, small enough to be visible only to

6100-403: The fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning ), and the ability of the neck to resist bending (see Truss rod ) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of

SECTION 60

#1732855804981

6200-534: The fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Most modern guitars feature a 12" neck radius, while older guitars from the 1960s and 1970s usually feature a 6-8" neck radius. Pinching a string against a fret on the fretboard effectively shortens the vibrating length of the string, producing a higher pitch. Fretboards are most commonly made of rosewood , ebony , maple , and sometimes manufactured using composite materials such as HPL or resin. See

6300-660: The guitar headstock may be missing completely, as in Steinberger guitar or some Chapman stick models. The headstock may be carved separately and glued to the neck using some sort of joint (such as a scarf joint ). There are two major trends in headstock construction, based on how the string will go after passing the nut. The advantages and disadvantages of both trends are very debatable and subjective, so these two variants are used: Luthiers of both styles frequently cite better sound, longer sustain and strings staying in tune longer as advantages of each style. Fragile construction

6400-410: The guitar is one determinant of a good instrument versus a poor-quality one. The cross-section of the neck can also vary, from a gentle "C" curve to a more pronounced "V" curve. There are many different types of neck profiles available, giving the guitarist many options. Some aspects to consider in a guitar neck may be the overall width of the fretboard, scale (distance between the frets), the neck wood,

6500-405: The inside of the neck. It is used to correct changes to the neck's curvature caused by aging of the neck timbers, changes in humidity, or to compensate for changes in the tension of strings. The tension of the rod and neck assembly is adjusted by a hex nut or an allen-key bolt on the rod, usually located either at the headstock, sometimes under a cover, or just inside the body of the guitar underneath

6600-536: The lowest four strings of the six-string guitar, which is the same tuning pitch as an electric bass guitar. It can, more rarely, be found with five or six strings, which provides a wider range of notes to be played with less movement up and down the neck. Electric guitars can have solid, semi-hollow, or hollow bodies; solid bodies produce little sound without amplification. In contrast to a standard acoustic guitar, electric guitars instead rely on electromagnetic pickups , and sometimes piezoelectric pickups, that convert

6700-416: The most important of all guitar makers, Antonio Torres Jurado , who increased the size of the guitar body, altered its proportions, and invented the breakthrough fan-braced pattern. Bracing, the internal pattern of wood reinforcements used to secure the guitar's top and back and prevent the instrument from collapsing under tension, is an important factor in how the guitar sounds. Torres' design greatly improved

6800-598: The name to Taylor as it sounded more American than Listug . Kurt Listug said, "Bob was the real guitar-maker." Listug became the partnership's businessman while Taylor handled design and production. In 1976, the company began to sell their guitars through retailers. In 1981, facing financial difficulties, Taylor Guitars took out a bank loan to purchase equipment. As of 2012, Taylor Guitars had more than 700 employees in two factories in El Cajon, California and in Tecate , Mexico, where

6900-585: The neck and creating a forward bow. Adjusting the truss rod affects the intonation of a guitar as well as the height of the strings from the fingerboard, called the action . Some truss rod systems, called double action truss systems, tighten both ways, pushing the neck both forward and backward (standard truss rods can only release to a point beyond which the neck is no longer compressed and pulled backward). The artist and luthier Irving Sloane pointed out, in his book Steel-String Guitar Construction , that truss rods are intended primarily to remedy concave bowing of

7000-414: The neck and sides built as one piece and the body built around it. The fingerboard , also called the fretboard, is a piece of wood embedded with metal frets that comprises the top of the neck. It is flat on classical guitars and slightly curved crosswise on acoustic and electric guitars. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which

7100-471: The neck, but cannot correct a neck with "back bow" or one that has become twisted. Classical guitars do not require truss rods, as their nylon strings exert a lower tensile force with lesser potential to cause structural problems. However, their necks are often reinforced with a strip of harder wood, such as an ebony strip that runs down the back of a cedar neck. There is no tension adjustment on this form of reinforcement. Inlays are visual elements set into

7200-454: The nut, which can adversely affect tuning stability, some guitarists fit a roller nut. Some instruments use a zero fret just in front of the nut. In this case the nut is used only for lateral alignment of the strings, the string height and length being dictated by the zero fret. A guitar's frets , fretboard , tuners , headstock , and truss rod , all attached to a long wooden extension, collectively constitute its neck . The wood used to make

7300-413: The octave. Each set of twelve frets represents an octave. The twelfth fret divides the scale length exactly into two halves, and the 24th fret position divides one of those halves in half again. The ratio of the spacing of two consecutive frets is 2 12 {\displaystyle {\sqrt[{12}]{2}}} ( twelfth root of two ). In practice, luthiers determine fret positions using

7400-502: The others are tuned in octaves. The 12-string guitar is also made in electric forms. The chime-like sound of the 12-string electric guitar was the basis of jangle pop . The acoustic bass guitar is a bass instrument with a hollow wooden body similar to, though usually somewhat larger than, that of a six-string acoustic guitar. Like the traditional electric bass guitar and the double bass , the acoustic bass guitar commonly has four strings, which are normally tuned E-A-D-G, an octave below

7500-420: The pitch. The traditional tuner layout is "3+3", in which each side of the headstock has three tuners (such as on Gibson Les Pauls ). In this layout, the headstocks are commonly symmetrical. Many guitars feature other layouts, including six-in-line tuners (featured on Fender Stratocasters ) or even "4+2" (e.g. Ernie Ball Music Man). Some guitars (such as Steinbergers ) do not have headstocks at all, in which case

7600-419: The player. These usually appear on the odd-numbered frets, but also on the 12th fret (the one- octave mark) instead of the 11th and 13th frets. Some older or high-end instruments have inlays made of mother of pearl, abalone, ivory, colored wood or other exotic materials and designs. Simpler inlays are often made of plastic or painted. High-end classical guitars seldom have fretboard inlays as a well-trained player

7700-499: The playing of single-lined melodies. Modern dimensions of the classical instrument were established by the Spaniard Antonio de Torres Jurado (1817–1892). Flat-top guitars with steel strings are similar to the classical guitar , however, the flat-top body size is usually significantly larger than a classical guitar, and has a narrower, reinforced neck and stronger structural design. The robust X-bracing typical of flat-top guitars

7800-430: The roughly classical-sized OO and Parlour to the large Dreadnought (the most commonly available type) and Jumbo . Ovation makes a modern variation, with a rounded back/side assembly molded from artificial materials. Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved from a solid billet, into a curved, rather than flat, shape. This violin-like construction

7900-423: The same fashion as other guitars, although slides are also often used, especially in blues. A steel guitar is any guitar played while moving a polished steel bar or similar hard object against plucked strings. The bar itself is called a "steel" and is the source of the name "steel guitar". The instrument differs from a conventional guitar in that it does not use frets; conceptually, it is somewhat akin to playing

8000-460: The same instrument is often used with steel strings particularly in its role within fado music. The guitar is called viola , or violão in Brazil, where it is often used with an extra seventh string by choro musicians to provide extra bass support. In Mexico, the popular mariachi band includes a range of guitars, from the small requinto to the guitarrón , a guitar larger than a cello, which

8100-607: The section "Neck" below for the importance of the length of the fretboard in connection to other dimensions of the guitar. The fingerboard plays an essential role in the treble tone for acoustic guitars. The quality of vibration of the fingerboard is the principal characteristic for generating the best treble tone. For that reason, ebony wood is better, but because of high use, ebony has become rare and extremely expensive. Most guitar manufacturers have adopted rosewood instead of ebony. Almost all guitars have frets, which are metal strips (usually nickel alloy or stainless steel) embedded along

8200-405: The shape of the rib). During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which is called purfling . This binding serves to seal off the end grain of the top and back. Purfling can also appear on the back of an acoustic guitar, marking the edge joints of

8300-514: The solo guitar.) Renaissance and Baroque guitars are easily distinguished, because the Renaissance guitar is very plain and the Baroque guitar is very ornate, with ivory or wood inlays all over the neck and body, and a paper-cutout inverted "wedding cake" inside the hole. Classical guitars, also known as "Spanish" guitars, are typically strung with nylon strings, plucked with the fingers, played in

8400-406: The sound of a stand-up bass ), 5.1 surround guitar , and such. Solid-body seven-string guitars were popularized in the 1980s and 1990s. Other artists go a step further, by using an eight-string guitar with two extra low strings. Although the most common seven-string has a low B string, Roger McGuinn (of The Byrds and Rickenbacker ) uses an octave G string paired with the regular G string as on

8500-476: The strings from the fingerboard), lighter (thinner) strings, and its electrical amplification lend the electric guitar to techniques less frequently used on acoustic guitars. These include tapping , extensive use of legato through pull-offs and hammer-ons (also known as slurs), pinch harmonics , volume swells , and use of a tremolo arm or effects pedals . Some electric guitar models feature piezoelectric pickups, which function as transducers to provide

8600-542: The strings to the air within the guitar body. Sound is further shaped by the characteristics of the guitar body's resonant cavity. In expensive instruments, the entire body is made of wood. In inexpensive instruments, the back may be made of plastic. In an acoustic instrument, the body of the guitar is a major determinant of the overall sound quality. The guitar top, or soundboard, is a finely crafted and engineered element made of tonewoods such as spruce and red cedar . This thin piece of wood, often only 2 or 3 mm thick,

8700-427: The strings. Physical properties of the thicker bass strings require them to be slightly longer than the treble strings to correct intonation . Reversing the strings, therefore, reverses the orientation of the saddle, adversely affecting intonation. The headstock is located at the end of the guitar neck farthest from the body. It is fitted with machine heads that adjust the tension of the strings, which in turn affects

8800-425: The strings. This is similar to the violin family of instruments where the dominant hand controls the bow. Left-handed players usually play a mirror image instrument manufactured especially for left-handed players. There are other options, some unorthodox, including learn to play a right-handed guitar as if the player is right-handed or playing an unmodified right-handed guitar reversed. Guitarist Jimi Hendrix played

8900-430: The top of the guitar under the strings. The air inside the body vibrates as the guitar top and body is vibrated by the strings, and the response of the air cavity at different frequencies is characterized, like the rest of the guitar body, by a number of resonance modes at which it responds more strongly. The top, back and ribs of an acoustic guitar body are very thin (1–2 mm), so a flexible piece of wood called lining

9000-550: The tuning machines are located elsewhere, either on the body or the bridge. The nut is a small strip of bone , plastic , brass , corian , graphite , stainless steel , or other medium-hard material, at the joint where the headstock meets the fretboard. Its grooves guide the strings onto the fretboard, giving consistent lateral string placement. It is one of the endpoints of the strings' vibrating length. It must be accurately cut, or it can contribute to tuning problems due to string slippage or string buzz. To reduce string friction in

9100-400: The two or three sections of the back. Binding and purfling materials are generally made of either wood or plastic. Body size, shape and style have changed over time. 19th-century guitars, now known as salon guitars, were smaller than modern instruments. Differing patterns of internal bracing have been used over time by luthiers. Torres, Hauser, Ramirez, Fleta, and C. F. Martin were among

9200-476: The type of neck construction (for example, the neck may be glued in or bolted on), and the shape (profile) of the back of the neck. Other types of material used to make guitar necks are graphite ( Steinberger guitars), aluminum ( Kramer Guitars , Travis Bean and Veleno guitars ), or carbon fiber ( Modulus Guitars and ThreeGuitars ). Double neck electric guitars have two necks, allowing the musician to quickly switch between guitar sounds. The neck joint or heel

9300-453: The vertex of the cone (Nationals), or a "spider" bridge, made of metal and mounted around the rim of the (inverted) cone (Dobros). Three-cone resonators always use a specialized metal bridge. The type of resonator guitar with a neck with a square cross-section—called "square neck" or "Hawaiian"—is usually played face up, on the lap of the seated player, and often with a metal or glass slide . The round neck resonator guitars are normally played in

9400-453: The vibration of the steel strings into signals , which are fed to an amplifier through a patch cable or radio transmitter . The sound is frequently modified by other electronic devices ( effects units ) or the natural distortion of valves ( vacuum tubes ) or the pre-amp in the amplifier. There are two main types of magnetic pickups, single - and double-coil (or humbucker ), each of which can be passive or active . The electric guitar

9500-584: The volume, tone, and projection of the instrument, and it has remained essentially unchanged since. Guitars are often divided into two broad categories: acoustic and electric guitars . Within each category, there are further sub-categories that are nearly endless in quantity and are always evolving. For example, an electric guitar can be purchased in a six-string model (the most common model) or in seven- or twelve-string formats. An instruments overall design, internal construction and components, wood type or species, hardware and electronic appointments all add to

9600-484: Was defined as being an instrument having "a long, fretted neck, flat wooden soundboard , ribs, and a flat back, most often with incurved sides." The term is used to refer to a number of chordophones that were developed and used across Europe, beginning in the 12th century and, later, in the Americas. A 3,300-year-old stone carving of a Hittite bard playing a stringed instrument is the oldest iconographic representation of

9700-471: Was developed in the 1840s by German-American luthiers, of whom Christian Friedrich "C. F." Martin is the best known. Originally used on gut-strung instruments, the strength of the system allowed the later guitars to withstand the additional tension of steel strings. Steel strings produce a brighter tone and a louder sound. The acoustic guitar is used in many kinds of music including folk, country, bluegrass, pop, jazz, and blues. Many variations are possible from

9800-410: Was introduced in 2004. It had two transducers, one mounted to the bridge and the other on the lower bout of the sound board, with a small, single-coil pickup mounted in the neck joint, all wired to the onboard preamp, which had three knobs for volume, tone and blend. This early ES system was available on the higher-end 500 series and above as well as the 30th-anniversary limited-edition series, starting in

9900-428: Was known to play more than the sixteen notes possible with four. The guitar's strings were tuned in unison, so, in other words, it was tuned by placing a finger on the second fret of the thinnest string and tuning the guitar bottom to top. The strings were a whole octave apart from one another, which is the reason for the different method of tuning. Because it was so different, there was major controversy as to who created

10000-430: Was to support the fretboard up to the fourteenth fret and glue the unsupported remaining length to the soundboard. The NT neck fitted into a slot on top of the guitar body, achieving the desired angle with small shims . Guitars sometimes require neck angle realignment (neck reset), and the NT system achieved this by changing shims. Prior to 1999, Taylor Guitars had a simple bolt-on neck design which could be adjusted without

#980019