33°38′46″N 111°53′57″W / 33.6460322°N 111.899058°W / 33.6460322; -111.899058
113-462: Mosrite was an American guitar manufacturing company, based in Bakersfield, California , from the late 1950s to the early 1990s. Founded by Semie Moseley , Mosrite guitars were played by many rock and roll and country artists. Mosrite guitars were known for innovative design, high-quality engineering, very thin, low-fretted and narrow necks (though Mosrite used taller frets and wider necks after
226-427: A " jazz guitar ". The tone of an acoustic guitar is produced by the strings' vibration, amplified by the hollow body of the guitar, which acts as a resonating chamber . The classical Spanish guitar is often played as a solo instrument using a comprehensive fingerstyle technique where each string is plucked individually by the player's fingers, as opposed to being strummed. The term "finger-picking" can also refer to
339-402: A "bass") is similar in appearance and construction to an electric guitar, but with a longer neck and scale length , and four to six strings. The four-string bass, by far the most common, is usually tuned the same as the double bass , which corresponds to pitches one octave lower than the four lowest pitched strings of a guitar (E, A, D, and G). The bass guitar is a transposing instrument , as it
452-413: A 12-string guitar, allowing him to incorporate chiming 12-string elements in standard six-string playing. In 1982 Uli Jon Roth developed the "Sky Guitar", with a vastly extended number of frets, which was the first guitar to venture into the upper registers of the violin. Roth's seven-string and "Mighty Wing" guitar features a wider octave range. The bass guitar (also called an "electric bass", or simply
565-417: A bound body and neck, output jack on the side and vibramute. Guitar The guitar is a stringed musical instrument that is usually fretted (with some exceptions ) and typically has six or twelve strings . It is usually held flat against the player's body and played by strumming or plucking the strings with the dominant hand, while simultaneously pressing selected strings against frets with
678-496: A double-neck to Joe Maphis , a Los Angeles -area TV performer of country music. He also made several similar twin-neck guitars (with the performer's name inlaid into the neck) for Maphis' protegé, the child prodigy guitarist Larry Collins , who still owns his three Mosrite twin-necks. By 1956, with an investment from Ray Boatright, a local Los Angeles Foursquare Gospel minister, Semie and Andy started their company, Mosrite of California. In gratitude to Reverend Boatright, Moseley named
791-440: A filler strip running down the length and behind the neck, used for strength or to fill the cavity through which the truss rod was installed in the neck. In acoustic guitars, string vibration is transmitted through the bridge and saddle to the body via sound board . The sound board is typically made of tonewoods such as spruce or cedar. Timbers for tonewoods are chosen for both strength and ability to transfer mechanical energy from
904-462: A good businessman, and thus the company fell on hard times repeatedly in the late 1960s and 1970s, but continued to produce Mosrite guitars until 1993 in North Carolina and Arkansas. Most of them were exported to Japan, where their popularity remained very strong. The quality of the instruments always remained very respectable. Semie Moseley died in 1992. His wife Loretta continued to produce Mosrites
1017-410: A guitar amp have played a key role in the development of blues and rock music , both as an accompaniment instrument (playing riffs and chords ) and performing guitar solos , and in many rock subgenres, notably heavy metal music and punk rock . The electric guitar has had a major influence on popular culture . The guitar is used in a wide variety of musical genres worldwide. It is recognized as
1130-470: A guitar was constructed from wood, with its strings made of catgut . Steel guitar strings were introduced near the end of the nineteenth century in the United States, but nylon and steel strings became mainstream only following World War II . The guitar's ancestors include the gittern , the vihuela , the four- course Renaissance guitar , and the five-course baroque guitar , all of which contributed to
1243-427: A guitar with one finger (the bar). Known for its portamento capabilities, gliding smoothly over every pitch between notes, the instrument can produce a sinuous crying sound and deep vibrato emulating the human singing voice. Typically, the strings are plucked (not strummed) by the fingers of the dominant hand, while the steel tone bar is pressed lightly against the strings and moved by the opposite hand. The instrument
SECTION 10
#17331142652971356-547: A larger version of the contemporary four-course guitars. The vihuela enjoyed only a relatively short period of popularity in Spain and Italy during an era dominated elsewhere in Europe by the lute ; the last surviving published music for the instrument appeared in 1576. Meanwhile, the five-course baroque guitar , which was documented in Spain from the middle of the 16th century, enjoyed popularity, especially in Spain, Italy and France from
1469-403: A manual note to raise or lower. The chord's letter name indicated the pedal to play, while as before, the color-coding specified the basic C, F, or G chord shape on the lower manual. Note name stickers were provided for the pedals. These extended rules allowed for chords such as (black) Am7, +A7, and Cm; (green) Dm7, D7, and − Fm; and (red) Em7, + E7, and -Gm. The height of any + or - before
1582-477: A modern 12-string guitar , but they only have four or five courses of strings rather than six single strings normally used now. They were more often used as rhythm instruments in ensembles than as solo instruments, and can often be seen in that role in early music performances. ( Gaspar Sanz 's Instrucción de Música sobre la Guitarra Española of 1674 contains his whole output for the solo guitar.) Renaissance and Baroque guitars are easily distinguished, because
1695-416: A primary instrument in genres such as blues , bluegrass , country , flamenco , folk , jazz , jota , ska , mariachi , metal , punk , funk , reggae , rock , grunge , soul , acoustic music , disco , new wave , new age , adult contemporary music , and pop , occasionally used as a sample in hip-hop , dubstep , or trap music . The modern word guitar and its antecedents have been applied to
1808-645: A radio or television. This may be evidenced by the introduction of the Talking Organ with its "Built-In Teacher," a phonograph intended for use with instructional recordings. The 1960s had the Thomas Organ Company at the height of its popularity. The company became the importer of the English-made Vox combo , the electronics of which would turn up in Thomas models. Thomas also took over manufacturing rights of
1921-402: A right-handed guitar strung in reverse (the treble strings and bass strings reversed). The problem with doing this is that it reverses the guitar's saddle angle. The saddle is the strip of material on top of the bridge where the strings rest. It is normally slanted slightly, making the bass strings longer than the treble strings. In part, the reason for this is the difference in the thickness of
2034-459: A single sound hole and a narrower neck. By the 14th century the qualifiers "moresca" or "morisca" and "latina" had been dropped, and these two chordophones were simply referred to as guitars. The Spanish vihuela , called in Italian the viola da mano , a guitar-like instrument of the 15th and 16th centuries, is widely considered to have been the single most important influence in the development of
2147-469: A six-string model (the most common model) or in seven- or twelve-string formats. An instruments overall design, internal construction and components, wood type or species, hardware and electronic appointments all add to the abundant nature of sub-categories and its unique tonal & functional property. Acoustic guitars form several notable subcategories within the acoustic guitar group: classical and flamenco guitars ; steel-string guitars, which include
2260-428: A slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action , but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz. The truss rod is a thin, strong metal rod that runs along
2373-496: A sound closer to that of an acoustic guitar with the flip of a switch or knob, rather than switching guitars. Those that combine piezoelectric pickups and magnetic pickups are sometimes known as hybrid guitars. Hybrids of acoustic and electric guitars are also common. There are also more exotic varieties, such as guitars with two , three, or rarely four necks, all manner of alternate string arrangements, fretless fingerboards (used almost exclusively on bass guitars, meant to emulate
SECTION 20
#17331142652972486-472: A specific tradition of folk, blues, bluegrass, and country guitar playing in the United States. Electric guitars , first patented in 1937, use a pickup and amplifier that made the instrument loud enough to be heard, but also enabled manufacturing guitars with a solid block of wood needing a resonant chamber. A wide array of electronic effects units became possible including reverb and distortion (or "overdrive") . Solid-body guitars began to dominate
2599-753: A wide variety of chordophones since classical times, sometimes causing confusion. The English word guitar , the German Gitarre , and the French guitare were all adopted from the Spanish guitarra , which comes from the Andalusian Arabic قيثارة ( qīthārah ) and the Latin cithara , which in turn came from the Ancient Greek κιθάρα which is of uncertain ultimate origin. Kithara appears in
2712-518: A year or so after his death, and since 2008 has been selling custom Mosrites via their website. The company now has recently released the Semie Moseley Model '63 and '65, based on the Ventures models made in those two years. Both models are made to the exact specifications as the original models; they are 100% hand-made and were created to commemorate Semie Moseley. Semie's daughter, Dana Moseley,
2825-513: Is also a luthier and continues to build Mosrite guitars. She also helps kick off the monthly "Mosrite Jam" in Bakersfield. Note that there are exceptions to this list of models where perhaps a 1960s model has white paint for the headstock logos or a 1970s 350 model has a basswood body and maple neck instead of a mahogany body and mahogany neck. Mosrite is a company where outliers aren't unheard of. Mosrite also used other names occasionally; "Gospel"
2938-550: Is an American manufacturer of electronic keyboards and a one-time holder of the manufacturing rights to the Moog synthesizer . The company was a force behind early electronic organs for the home. It went out of business in 1979 but reopened in 1996. Founded by Canadian Edward G. Thomas as the "Thomas Organ & Piano Co." in Woodstock, Ontario in 1875, the company's first instruments were pipe organs , moving later to pump organs . In
3051-436: Is expected to know his or her way around the instrument. In addition to fretboard inlay, the headstock and soundhole surround are also frequently inlaid. The manufacturer's logo or a small design is often inlaid into the headstock. Rosette designs vary from simple concentric circles to delicate fretwork mimicking the historic rosette of lutes. Bindings that edge the finger and soundboards are sometimes inlaid. Some instruments have
3164-404: Is glued into the corners where the rib meets the top and back. This interior reinforcement provides 5 to 20 mm of solid gluing area for these corner joints. Solid linings are often used in classical guitars, while kerfed lining is most often found in steel-string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow it to bend with
3277-602: Is not official, it was coined by Mosrite enthusiasts to differentiate the two Ventures II guitars. Acoustic guitars: Unlike 1960s models, the 1970s marked a departure from the skinny necks; Mosrite didn't always make necks with thin-width fretboards in the 70s. An estimate of 125 Brass Rail models are estimated to have been built with the Deluxe models being scarcer, an estimate of 12 being built. This era mostly consisted of Ventures reissues and Ventures shaped models including but not limited to: 1963 Ventures Model Reissue with
3390-413: Is notated in bass clef an octave higher than it sounds (as is the double bass) to avoid excessive ledger lines being required below the staff . Like the electric guitar, the bass guitar has pickups and it is plugged into an amplifier and speaker for live performances. Modern guitars can be constructed to suit both left- and right-handed players. Typically the dominant hand is used to pluck or strum
3503-402: Is often used with an extra seventh string by choro musicians to provide extra bass support. In Mexico, the popular mariachi band includes a range of guitars, from the small requinto to the guitarrón , a guitar larger than a cello, which is tuned in the bass register. In Colombia, the traditional quartet includes a range of instruments too, from the small bandola (sometimes known as
Mosrite - Misplaced Pages Continue
3616-462: Is played while sitting, placed horizontally across the player's knees or otherwise supported. The horizontal playing style is called "Hawaiian style". The twelve-string guitar usually has steel strings, and it is widely used in folk music , blues , and rock and roll . Rather than having only six strings, the 12-string guitar has six courses made up of two strings each, like a mandolin or lute . The highest two courses are tuned in unison, while
3729-411: Is strengthened by differing types of internal bracing . Many luthiers consider the top the dominant factor in determining the sound quality. The majority of the instrument's sound is heard through the vibration of the guitar top as the energy of the vibrating strings is transferred to it. The body of an acoustic guitar has a sound hole through which sound projects. The sound hole is usually a round hole in
3842-402: Is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge is located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having
3955-420: Is the best known. Originally used on gut-strung instruments, the strength of the system allowed the later guitars to withstand the additional tension of steel strings. Steel strings produce a brighter tone and a louder sound. The acoustic guitar is used in many kinds of music including folk, country, bluegrass, pop, jazz, and blues. Many variations are possible from the roughly classical-sized OO and Parlour to
4068-530: Is the point at which the neck is either bolted or glued to the body of the guitar. Almost all acoustic steel-string guitars, with the primary exception of Taylors, have glued (otherwise known as set) necks, while electric guitars are constructed using both types. Most classical guitars have a neck and headblock carved from one piece of wood, known as a "Spanish heel". Commonly used set neck joints include mortise and tenon joints (such as those used by C. F. Martin & Co.), dovetail joints (also used by C. F. Martin on
4181-548: Is used extensively in jazz , blues , R & B , and rock and roll . The first successful magnetic pickup for a guitar was invented by George Beauchamp , and incorporated into the 1931 Ro-Pat-In (later Rickenbacker ) "Frying Pan" lap steel; other manufacturers, notably Gibson , soon began to install pickups in archtop models. After World War II the completely solid-body electric was popularized by Gibson in collaboration with Les Paul , and independently by Leo Fender of Fender Music . The lower fretboard action (the height of
4294-512: Is used to refer to a number of chordophones that were developed and used across Europe, beginning in the 12th century and, later, in the Americas. A 3,300-year-old stone carving of a Hittite bard playing a stringed instrument is the oldest iconographic representation of a chordophone, and clay plaques from Babylonia show people playing a lute-like instrument which is similar to the guitar. Several scholars cite varying influences as antecedents to
4407-422: The Moog synthesizer and enjoyed heavy celebrity endorsement from the likes of Lawrence Welk , whose organist Bob Ralston both played a Thomas on The Lawrence Welk Show and on tour at organ and piano shops to demonstrate the greatly improved tonal quality of the new models, and Lucille Ball , who featured a Thomas on at least one episode of The Lucy Show . Welk had a high-end model named after him in 1968,
4520-637: The Thomas Organ Company to market their guitars. After this, they tried to deal directly with stores, and they sold 280 guitars in 1969 before they came to the shop one day in February and found their doors pad-locked. Two years after his bankruptcy, Semie was able to get back the Mosrite name, and in 1970 he started making guitars again in Pumpkin Center near Bakersfield . He moved his factory three times in
4633-424: The loudspeaker . The original purpose of the resonator was to produce a very loud sound; this purpose has been largely superseded by electrical amplification , but the resonator guitar is still played because of its distinctive tone. Resonator guitars may have either one or three resonator cones. The method of transmitting sound resonance to the cone is either a "biscuit" bridge, made of a small piece of hardwood at
Mosrite - Misplaced Pages Continue
4746-537: The "Mark I," "Mark X," and "Mark XII" versions, respectively,) "the Ventures II model" (of several versions,) and "the Ventures Mark V model." "The Ventures" line started in 1963 and ran through 1967 or 1968 when the licensing agreement with The Ventures ended. At the peak of production, in 1968, Mosrite was making around 600 guitars per month. Mosrite of California went bankrupt in late 1968 after they contracted with
4859-403: The 16th century, the five-course guitar was established. It was not a straightforward process. There were two types of five-course guitars, differing in the location of the major third and in the interval pattern. The fifth course can be inferred because the instrument was known to play more than the sixteen notes possible with four. The guitar's strings were tuned in unison, so, in other words, it
4972-596: The 1960s,) and extremely hot (high output) pickups. Moseley's design for The Ventures , known as "the Ventures model" (later known as the "Mark I") was generally considered to be the flagship of the line. Mosrite also made a small number of acoustic guitars; The Serenade model, and four Balladere models, including one 12 string. Semie Moseley started playing guitar in an evangelical group in Bakersfield, California , at age 13. He and his brother Andy experimented with guitars from their teen-age years, refinishing instruments and building new necks. Semie began building guitars in
5085-876: The American Orville Gibson . Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired F-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings . All three principal types of resonator guitars were invented by
5198-460: The Bible four times (1 Cor. 14:7, Rev. 5:8, 14:2, and 15:2), and is usually translated into English as harp . The origins of the modern guitar are not known. Before the development of the electric guitar and the use of synthetic materials, a guitar was defined as being an instrument having "a long, fretted neck, flat wooden soundboard , ribs, and a flat back, most often with incurved sides." The term
5311-494: The D-28 and similar models) and Spanish heel neck joints, which are named after the shoe they resemble and commonly found in classical guitars. All three types offer stability. Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid-body electric guitars,
5424-480: The Deleuze-Guattari, for use when traveling or in confined rooms or spaces), to the slightly larger tiple , to the full-sized classical guitar. The requinto also appears in other Latin-American countries as a complementary member of the guitar family, with its smaller size and scale, permitting more projection for the playing of single-lined melodies. Modern dimensions of the classical instrument were established by
5537-524: The Los Angeles area around 1952 or 1953, apprenticing at the Rickenbacker factory. There he learned much of his guitar making skills from Roger Rossmeisl , a German immigrant who brought old-world luthier techniques into the modern electric guitar manufacturing process. One of the most recognizable features on most Mosrite guitars is the "German Carve" on the top that Moseley learned from Rossmeisl. During
5650-527: The Moseleys could put equipment. In 1959, Andy moved to Nashville, Tennessee , for a year to popularize the Mosrite name and sold a few, including to Grand Ole Opry entertainers and road musicians. Andy said: "And that’s how we kept the factory going at the time: custom guitars". Moseley made guitars in Los Angeles until 1959, when he moved to Oildale, California , just north of Bakersfield. In 1962, he moved his shop to Panama Lane where he designed and produced
5763-569: The Renaissance guitar is very plain and the Baroque guitar is very ornate, with ivory or wood inlays all over the neck and body, and a paper-cutout inverted "wedding cake" inside the hole. Classical guitars, also known as "Spanish" guitars, are typically strung with nylon strings, plucked with the fingers, played in a seated position and are used to play a diversity of musical styles including classical music . The classical guitar's wide, flat neck allows
SECTION 50
#17331142652975876-540: The Slovak-American John Dopyera (1893–1988) for the National and Dobro ( Do pyera Bro thers) companies. Similar to the flat top guitar in appearance, but with a body that may be made of brass, nickel-silver, or steel as well as wood, the sound of the resonator guitar is produced by one or more aluminum resonator cones mounted in the middle of the top. The physical principle of the guitar is therefore similar to
5989-495: The Spaniard Antonio de Torres Jurado (1817–1892). Flat-top guitars with steel strings are similar to the classical guitar , however, the flat-top body size is usually significantly larger than a classical guitar, and has a narrower, reinforced neck and stronger structural design. The robust X-bracing typical of flat-top guitars was developed in the 1840s by German-American luthiers, of whom Christian Friedrich "C. F." Martin
6102-419: The Spanish guitar. All of these nations even imitated the five-course guitar by "recreating" their own. Finally, c. 1850 , the form and structure of the modern guitar were developed by different Spanish makers such as Manuel de Soto y Solares and, perhaps the most important of all guitar makers, Antonio Torres Jurado , who increased the size of the guitar body, altered its proportions, and invented
6215-408: The aforementioned Lawrence Welk spinet model. Joe Benaron was President of Thomas during its heyday. Ennio Unchini was the Italian importer. Like most American furniture of the 1950s, early electronic organs were massive affairs; indeed, the company's largest market was the home market. Thomas' introduction of the "streamlined" console and the introduction of solid state electronics made Thomas
6328-403: The baroque guitar. It had six courses (usually), lute-like tuning in fourths and a guitar-like body, although early representations reveal an instrument with a sharply cut waist. It was also larger than the contemporary four-course guitars. By the 16th century, the vihuela's construction had more in common with the modern guitar, with its curved one-piece ribs, than with the viols, and more like
6441-628: The breakthrough fan-braced pattern. Bracing, the internal pattern of wood reinforcements used to secure the guitar's top and back and prevent the instrument from collapsing under tension, is an important factor in how the guitar sounds. Torres' design greatly improved the volume, tone, and projection of the instrument, and it has remained essentially unchanged since. Guitars are often divided into two broad categories: acoustic and electric guitars . Within each category, there are further sub-categories that are nearly endless in quantity and are always evolving. For example, an electric guitar can be purchased in
6554-445: The chord symbol showed which note to raise or lower. These features and others were incorporated across the product line throughout the 1960s, including small, relatively inexpensive spinet models with 37-note manuals (the AR1) and a unique "arc" 13-note pedal board, another Thomas Organ innovation, although one which was too narrow to allow true heel-toe playing. Thomas however did lengthen
6667-425: The chords. The idea was that a rank beginner could create music simply by following the very simple music books that featured lettered noteheads and color-coded chords. "Matching the colors" was sufficient to play full-sounding four-voice chords. Thomas's three-volume course Color-Glo Plus: A Sound For Everyone introduced "three simple rules" that allowed for more chords, by changing the pedal notes and/or specifying
6780-433: The company by combining his and Boatright's last names; the name is properly pronounced MOZE-rite, based on the pronunciation Semie Moseley used for his own name. Semie, who built guitars for the L.A.-based Rickenbacker company, told his co-workers that he was making his own product and was fired by Rickenbacker. When they began, their production was all custom, handmade guitars, built in garages, tin storage sheds, wherever
6893-430: The constant 17.817—an approximation to 1/(1-1/ 2 12 {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817). Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have a much thicker gauge, allowing for use of
SECTION 60
#17331142652977006-454: The development of the modern six-string instrument. There are three main types of modern guitar: the classical guitar (Spanish guitar); the steel-string acoustic guitar or electric guitar ; and the Hawaiian guitar (played across the player's lap). Traditional acoustic guitars include the flat top guitar (typically with a large sound hole) or the archtop guitar , which is sometimes called
7119-431: The early 1950s, Thomas George invented the Thomas electronic organ with its single manual and ten stops. Thomas reorganized the company in 1956 into the Thomas Organ Company of Sepulveda, California . Unlike later electronic organs with conventional tab stops, early Thomas electronic organs utilized a dial control for their stops, presumably to add a certain familiarity to its users since the dials worked much like those on
7232-429: The exterior surface of a guitar, both for decoration and artistic purposes and, in the case of the markings on the 3rd, 5th, 7th and 12th fret (and in higher octaves), to provide guidance to the performer about the location of frets on the instrument. The typical locations for inlay are on the fretboard, headstock, and on acoustic guitars around the soundhole, known as the rosette . Inlays range from simple plastic dots on
7345-413: The fingers of the opposite hand. A guitar pick may also be used to strike the strings. The sound of the guitar is projected either acoustically , by means of a resonant hollow chamber on the guitar, or amplified by an electronic pickup and an amplifier . The guitar is classified as a chordophone , meaning the sound is produced by a vibrating string stretched between two fixed points. Historically,
7458-462: The first Joe Maphis model guitars, one model of which would eventually evolve into the "Ventures model" guitar and bass (Joe Maphis would later get a model of his own, similar to a Mosrite Combo model but without the F-hole ). At this time, Mosrite made everything in-house, except for the tuners. Mosrite pickups after the 50s usually came in several ways through Mosrite's history, none with metal casing; 1:
7571-516: The flat-topped, or "folk", guitar; twelve-string guitars ; and the arched-top guitar. The acoustic guitar group also includes unamplified guitars designed to play in different registers, such as the acoustic bass guitar, which has a similar tuning to that of the electric bass guitar. Renaissance and Baroque guitars are the ancestors of the modern classical and flamenco guitar . They are substantially smaller, more delicate in construction, and generate less volume. The strings are paired in courses as in
7684-474: The fretboard and accessible through the sound hole. Some truss rods can only be accessed by removing the neck. The truss rod counteracts the immense amount of tension the strings place on the neck, bringing the neck back to a straighter position. Turning the truss rod clockwise tightens it, counteracting the tension of the strings and straightening the neck or creating a backward bow. Turning the truss rod counter-clockwise loosens it, allowing string tension to act on
7797-616: The fretboard and located at exact points that divide the scale length in accordance with a specific mathematical formula. The exceptions include fretless bass guitars and very rare fretless guitars. Pressing a string against a fret determines the strings' vibrating length and therefore its resultant pitch. The pitch of each consecutive fret is defined at a half-step interval on the chromatic scale . Standard classical guitars have 19 frets and electric guitars between 21 and 24 frets, although guitars have been made with as many as 27 frets. Frets are laid out to accomplish an equal tempered division of
7910-448: The fretboard to intricate works of art covering the entire exterior surface of a guitar (front and back). Some guitar players have used LEDs in the fretboard to produce unique lighting effects onstage. Fretboard inlays are most commonly shaped like dots, diamond shapes, parallelograms, or large blocks in between the frets. Dots are usually inlaid into the upper edge of the fretboard in the same positions, small enough to be visible only to
8023-403: The fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning ), and the ability of the neck to resist bending (see Truss rod ) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of
8136-534: The fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Most modern guitars feature a 12" neck radius, while older guitars from the 1960s and 1970s usually feature a 6-8" neck radius. Pinching a string against a fret on the fretboard effectively shortens the vibrating length of the string, producing a higher pitch. Fretboards are most commonly made of rosewood , ebony , maple , and sometimes manufactured using composite materials such as HPL or resin. See
8249-410: The guitar is one determinant of a good instrument versus a poor-quality one. The cross-section of the neck can also vary, from a gentle "C" curve to a more pronounced "V" curve. There are many different types of neck profiles available, giving the guitarist many options. Some aspects to consider in a guitar neck may be the overall width of the fretboard, scale (distance between the frets), the neck wood,
8362-420: The guitar market during the 1960s and 1970s; they are less prone to unwanted acoustic feedback . As with acoustic guitars, there are a number of types of electric guitars, including hollowbody guitars , archtop guitars (used in jazz guitar , blues and rockabilly ) and solid-body guitars , which are widely used in rock music . The loud, amplified sound and sonic power of the electric guitar played through
8475-405: The inside of the neck. It is used to correct changes to the neck's curvature caused by aging of the neck timbers, changes in humidity, or to compensate for changes in the tension of strings. The tension of the rod and neck assembly is adjusted by a hex nut or an allen-key bolt on the rod, usually located either at the headstock, sometimes under a cover, or just inside the body of the guitar underneath
8588-403: The large Dreadnought (the most commonly available type) and Jumbo . Ovation makes a modern variation, with a rounded back/side assembly molded from artificial materials. Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved from a solid billet, into a curved, rather than flat, shape. This violin-like construction is usually credited to
8701-435: The large single coil similar to (but not as long as) a P90, 2: a cheaper version of the first pickup that showed on cheaper models (Celebrity III, Mark V,) 3: a cheaper pickup only found on the first iteration of the Ventures II and 4: a Mosrite Humbucker mostly found on some 1970s models. The full "The Ventures" line consisted of "the Ventures model" (as several versions: a 6 String Guitar, 4 String Bass, and 12 String Guitar -
8814-457: The late 16th century to the mid-18th century. In Portugal, the word viola referred to the guitar, as guitarra meant the " Portuguese guitar ", a variety of cittern . There were many different plucked instruments that were being invented and used in Europe during the Middle Ages. By the 16th century, most of the forms of guitar had fallen off, to never be seen again. However, midway through
8927-536: The lowest four strings of the six-string guitar, which is the same tuning pitch as an electric bass guitar. It can, more rarely, be found with five or six strings, which provides a wider range of notes to be played with less movement up and down the neck. Electric guitars can have solid, semi-hollow, or hollow bodies; solid bodies produce little sound without amplification. In contrast to a standard acoustic guitar, electric guitars instead rely on electromagnetic pickups , and sometimes piezoelectric pickups, that convert
9040-421: The lute an offshoot or separate line of development which did not influence the evolution of the guitar in any significant way. At least two instruments called "guitars" were in use in Spain by 1200: the guitarra latina (Latin guitar) and the so-called guitarra morisca (Moorish guitar). The guitarra morisca had a rounded back, a wide fingerboard, and several sound holes. The guitarra Latina had
9153-541: The modern guitar. Although the development of the earliest "guitar" is lost to the history of medieval Spain, two instruments are commonly claimed as influential predecessors: the four-string oud and its precursor, the European lute ; the former was brought to Iberia by the Moors in the 8th century. It has often been assumed that the guitar is a development of the lute, or of the ancient Greek kithara. However, many scholars consider
9266-532: The most influential designers of their time. Bracing not only strengthens the top against potential collapse due to the stress exerted by the tensioned strings but also affects the resonance characteristics of the top. The back and sides are made out of a variety of timbers such as mahogany, Indian rosewood and highly regarded Brazilian rosewood ( Dalbergia nigra ). Each one is primarily chosen for their aesthetic effect and can be decorated with inlays and purfling. Thomas Organ Company The Thomas Organ Company
9379-479: The musician to play scales, arpeggios, and certain chord forms more easily and with less adjacent string interference than on other styles of guitar. Flamenco guitars are very similar in construction, but they are associated with a more percussive tone. In Portugal, the same instrument is often used with steel strings particularly in its role within fado music. The guitar is called viola , or violão in Brazil, where it
9492-585: The neck and creating a forward bow. Adjusting the truss rod affects the intonation of a guitar as well as the height of the strings from the fingerboard, called the action . Some truss rod systems, called double action truss systems, tighten both ways, pushing the neck both forward and backward (standard truss rods can only release to a point beyond which the neck is no longer compressed and pulled backward). The artist and luthier Irving Sloane pointed out, in his book Steel-String Guitar Construction , that truss rods are intended primarily to remedy concave bowing of
9605-414: The neck and sides built as one piece and the body built around it. The fingerboard , also called the fretboard, is a piece of wood embedded with metal frets that comprises the top of the neck. It is flat on classical guitars and slightly curved crosswise on acoustic and electric guitars. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which
9718-471: The neck, but cannot correct a neck with "back bow" or one that has become twisted. Classical guitars do not require truss rods, as their nylon strings exert a lower tensile force with lesser potential to cause structural problems. However, their necks are often reinforced with a strip of harder wood, such as an ebony strip that runs down the back of a cedar neck. There is no tension adjustment on this form of reinforcement. Inlays are visual elements set into
9831-537: The next 20 years, to Oklahoma City in the mid-1970s, to the township of Jonas Ridge, in Burke County, North Carolina , in 1981 (where a factory fire destroyed the operation,) and to Leachville, Arkansas , in 1991. Only one guitar was produced in Leachville and is now on display at the town's Melody Theater. Though an acknowledged genius at guitar design and construction, Moseley lacked many basic skills necessary to be
9944-454: The nut, which can adversely affect tuning stability, some guitarists fit a roller nut. Some instruments use a zero fret just in front of the nut. In this case the nut is used only for lateral alignment of the strings, the string height and length being dictated by the zero fret. A guitar's frets , fretboard , tuners , headstock , and truss rod , all attached to a long wooden extension, collectively constitute its neck . The wood used to make
10057-413: The octave. Each set of twelve frets represents an octave. The twelfth fret divides the scale length exactly into two halves, and the 24th fret position divides one of those halves in half again. The ratio of the spacing of two consecutive frets is 2 12 {\displaystyle {\sqrt[{12}]{2}}} ( twelfth root of two ). In practice, luthiers determine fret positions using
10170-502: The others are tuned in octaves. The 12-string guitar is also made in electric forms. The chime-like sound of the 12-string electric guitar was the basis of jangle pop . The acoustic bass guitar is a bass instrument with a hollow wooden body similar to, though usually somewhat larger than, that of a six-string acoustic guitar. Like the traditional electric bass guitar and the double bass , the acoustic bass guitar commonly has four strings, which are normally tuned E-A-D-G, an octave below
10283-568: The pedals to enable theoretically at least heel and toe playing. Especially remarkable was the fact that the spinets started around US$ 500. Larger models included the Concert Serenade and the Lawrence Welk , each with two 44-note manuals and a 25-note pedal board. Larger still were the Celebrity with two 61-note manuals and a 32-note pedal board (revised to a 25-note version in later editions),
10396-420: The pitch. The traditional tuner layout is "3+3", in which each side of the headstock has three tuners (such as on Gibson Les Pauls ). In this layout, the headstocks are commonly symmetrical. Many guitars feature other layouts, including six-in-line tuners (featured on Fender Stratocasters ) or even "4+2" (e.g. Ernie Ball Music Man). Some guitars (such as Steinbergers ) do not have headstocks at all, in which case
10509-419: The player. These usually appear on the odd-numbered frets, but also on the 12th fret (the one- octave mark) instead of the 11th and 13th frets. Some older or high-end instruments have inlays made of mother of pearl, abalone, ivory, colored wood or other exotic materials and designs. Simpler inlays are often made of plastic or painted. High-end classical guitars seldom have fretboard inlays as a well-trained player
10622-546: The preeminent manufacturer of home organs. That latter introduction to the Thomas line led to developments much like those found of synthesizers of later years; one later version, the 1973 Monticello , actually incorporated a synthesizer in its upper manual which actually was a Moog synthesizer. It was found on the MONTICELLO Models 371 & 372 and also on the CELEBRITY Model 871. Another innovation during its heyday
10735-423: The same fashion as other guitars, although slides are also often used, especially in blues. A steel guitar is any guitar played while moving a polished steel bar or similar hard object against plucked strings. The bar itself is called a "steel" and is the source of the name "steel guitar". The instrument differs from a conventional guitar in that it does not use frets; conceptually, it is somewhat akin to playing
10848-526: The same time, Moseley apprenticed with Paul Bigsby in Downey, California , the man who made the first modern solid-body guitar for Merle Travis in 1948, and who invented the Bigsby vibrato tailpiece , which is still used today. In 1954, Semie built a triple-neck guitar in his garage (the longest neck was a standard guitar, the second-longest neck an octave higher, the shortest was an eight-string mandolin.) He presented
10961-607: The section "Neck" below for the importance of the length of the fretboard in connection to other dimensions of the guitar. The fingerboard plays an essential role in the treble tone for acoustic guitars. The quality of vibration of the fingerboard is the principal characteristic for generating the best treble tone. For that reason, ebony wood is better, but because of high use, ebony has become rare and extremely expensive. Most guitar manufacturers have adopted rosewood instead of ebony. Almost all guitars have frets, which are metal strips (usually nickel alloy or stainless steel) embedded along
11074-405: The shape of the rib). During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which is called purfling . This binding serves to seal off the end grain of the top and back. Purfling can also appear on the back of an acoustic guitar, marking the edge joints of
11187-406: The sound of a stand-up bass ), 5.1 surround guitar , and such. Solid-body seven-string guitars were popularized in the 1980s and 1990s. Other artists go a step further, by using an eight-string guitar with two extra low strings. Although the most common seven-string has a low B string, Roger McGuinn (of The Byrds and Rickenbacker ) uses an octave G string paired with the regular G string as on
11300-476: The strings from the fingerboard), lighter (thinner) strings, and its electrical amplification lend the electric guitar to techniques less frequently used on acoustic guitars. These include tapping , extensive use of legato through pull-offs and hammer-ons (also known as slurs), pinch harmonics , volume swells , and use of a tremolo arm or effects pedals . Some electric guitar models feature piezoelectric pickups, which function as transducers to provide
11413-542: The strings to the air within the guitar body. Sound is further shaped by the characteristics of the guitar body's resonant cavity. In expensive instruments, the entire body is made of wood. In inexpensive instruments, the back may be made of plastic. In an acoustic instrument, the body of the guitar is a major determinant of the overall sound quality. The guitar top, or soundboard, is a finely crafted and engineered element made of tonewoods such as spruce and red cedar . This thin piece of wood, often only 2 or 3 mm thick,
11526-427: The strings. Physical properties of the thicker bass strings require them to be slightly longer than the treble strings to correct intonation . Reversing the strings, therefore, reverses the orientation of the saddle, adversely affecting intonation. The headstock is located at the end of the guitar neck farthest from the body. It is fitted with machine heads that adjust the tension of the strings, which in turn affects
11639-425: The strings. This is similar to the violin family of instruments where the dominant hand controls the bow. Left-handed players usually play a mirror image instrument manufactured especially for left-handed players. There are other options, some unorthodox, including learn to play a right-handed guitar as if the player is right-handed or playing an unmodified right-handed guitar reversed. Guitarist Jimi Hendrix played
11752-430: The top of the guitar under the strings. The air inside the body vibrates as the guitar top and body is vibrated by the strings, and the response of the air cavity at different frequencies is characterized, like the rest of the guitar body, by a number of resonance modes at which it responds more strongly. The top, back and ribs of an acoustic guitar body are very thin (1–2 mm), so a flexible piece of wood called lining
11865-550: The tuning machines are located elsewhere, either on the body or the bridge. The nut is a small strip of bone , plastic , brass , corian , graphite , stainless steel , or other medium-hard material, at the joint where the headstock meets the fretboard. Its grooves guide the strings onto the fretboard, giving consistent lateral string placement. It is one of the endpoints of the strings' vibrating length. It must be accurately cut, or it can contribute to tuning problems due to string slippage or string buzz. To reduce string friction in
11978-400: The two or three sections of the back. Binding and purfling materials are generally made of either wood or plastic. Body size, shape and style have changed over time. 19th-century guitars, now known as salon guitars, were smaller than modern instruments. Differing patterns of internal bracing have been used over time by luthiers. Torres, Hauser, Ramirez, Fleta, and C. F. Martin were among
12091-476: The type of neck construction (for example, the neck may be glued in or bolted on), and the shape (profile) of the back of the neck. Other types of material used to make guitar necks are graphite ( Steinberger guitars), aluminum ( Kramer Guitars , Travis Bean and Veleno guitars ), or carbon fiber ( Modulus Guitars and ThreeGuitars ). Double neck electric guitars have two necks, allowing the musician to quickly switch between guitar sounds. The neck joint or heel
12204-453: The vertex of the cone (Nationals), or a "spider" bridge, made of metal and mounted around the rim of the (inverted) cone (Dobros). Three-cone resonators always use a specialized metal bridge. The type of resonator guitar with a neck with a square cross-section—called "square neck" or "Hawaiian"—is usually played face up, on the lap of the seated player, and often with a metal or glass slide . The round neck resonator guitars are normally played in
12317-453: The vibration of the steel strings into signals , which are fed to an amplifier through a patch cable or radio transmitter . The sound is frequently modified by other electronic devices ( effects units ) or the natural distortion of valves ( vacuum tubes ) or the pre-amp in the amplifier. There are two main types of magnetic pickups, single - and double-coil (or humbucker ), each of which can be passive or active . The electric guitar
12430-409: Was Color-Glo, an instructional system which illuminated the keys of the manuals (and therefore their corresponding notes in reverse relief) from behind with fluorescent lights. The lower manual had black, green, and red colored bands behind the notes necessary to play a second-inversion C, a first-inversion F and a root-position G. The C, F and G pedals had colored bands across their tips corresponding to
12543-466: Was also repeated by Nicolas Doizi de Velasco in 1640, however this claim has been contested by others who state that Espinel's birth year (1550) make it impossible for him to be responsible for the tradition. He believed that the tuning was the reason the instrument became known as the Spanish guitar in Italy. Even later, in the same century, Gaspar Sanz wrote that other nations such as Italy or France added to
12656-452: Was often a name associated with guitars given away to churches although it was also used during Mosrite's bankruptcy period when they didn't have their Mosrite name (1969–1970,) Semie also used his last name "Moseley" for guitars built during the same period. This Ventures "Slab Body" is the model that Johnny Ramone of the Ramones was mostly known to play. The "Ventures II German Carve" name
12769-435: Was tuned by placing a finger on the second fret of the thinnest string and tuning the guitar bottom to top. The strings were a whole octave apart from one another, which is the reason for the different method of tuning. Because it was so different, there was major controversy as to who created the five course guitar. A literary source, Lope de Vega's Dorotea, gives the credit to the poet and musician Vicente Espinel . This claim
#296703