Misplaced Pages

#697302

76-496: The bikes feature a new 1649 cc straight-six engine which is mounted transversely across chassis. The cylinders are angled forward by 55°. The engine was originally used on the Concept 6, a concept bike that was shown at the 2009 EICMA Milan Motor Show . BMW claims that the engine, which at 560 mm (22 in) wide is just 67 mm (2.6 in) wider than the K1300 engine, is

152-400: A secondary imbalance . This is caused by the acceleration/deceleration of the pistons during the top half of the crankshaft rotation being greater than that of the pistons in the bottom half of the crankshaft rotation (because the connecting rods are not infinitely long). As a result, two pistons are always accelerating faster in one direction, while the other two are accelerating more slowly in

228-452: A triple in power delivery. As such, it also requires crank throws at 60° – . Such designs appear to have been limited to diesel engines such as the Detroit 71 series , marine engines, and outboard motors. Some of the 120 possible crankshaft configurations have useful properties. Still, all of them have a rocking imbalance that may or may not require a balance shaft, depending on

304-611: A 1.8 L flathead petrol engine used by the Opel 8/40 PS . The displacement of this engine was expanded as it was used in later models such as the Opel Kapitän and Opel Admiral , with later versions switching to an overhead valve (pushrod) design. In 1968, the straight-six versions of the Opel CIH engine were introduced, initially using a single overhead camshaft (SOHC) with some later versions using double overhead camshafts (DOHC). Production of

380-616: A 3.2 L turbocharged Mitsubishi engine (used the Pajero/Shogun/Montero SUV) and a 3.0 L Toyota engine. European and Asian trucks with a gross vehicle weight rating between 7.5 and 18 tonnes typically use inline four-cylinder diesel engines with displacements around 5 litres. Larger displacements are found in locomotive, marine and stationary engines. Displacement can also be very small, as found in kei cars sold in Japan. Several of these engines had four cylinders at

456-520: A V6 engine replaced it. The Nissan TB overhead valve engine was introduced in 1987 and produced alongside the other straight-six engines. The six-cylinder versions of the Prince G engine were introduced in 1963 and remained in production until 1969, three years after Prince's merger with Nissan. The 1969–1973 Nissan S20 dual overhead camshaft engine (used in the Nissan Fairlady and first generation of

532-592: A displacement of 1.5–2.5 L (92–153 cu in). The smallest automotive straight-four engine was used in the 1963–1967 Honda T360 kei truck and has a displacement of 356 cc (21.7 cu in), while the largest mass-produced straight-four car engine is the 1999–2019 Mitsubishi 4M41 diesel engine which was used in the Mitsubishi Pajero and has a displacement of 3.2 L (195 cu in). Significant straight-four car engines include: Many early racing cars used straight-four engines, however

608-436: A line along a common crankshaft. The majority of automotive four-cylinder engines use a straight-four layout (with the exceptions of the flat-four engines produced by Subaru and Porsche) and the layout is also very common in motorcycles and other machinery. Therefore the term "four-cylinder engine" is usually synonymous with straight-four engines. When a straight-four engine is installed at an inclined angle (instead of with

684-518: A lower-cost version of the Oakland six, powered by the Pontiac Split-Head Six flathead engine, which used two cylinder heads. This engine was replaced by the 1941–1954 Pontiac flathead six . The unrelated Pontiac OHV 6 overhead valve engine was produced in 1964–1965, based on a Chevrolet design. Pontiac's final straight-six engine was the 1966–1969 Pontiac OHC 6 overhead camshaft engine, which

760-451: A single overhead camshaft engine in 1979 and upgraded to dual overhead camshafts before production ended in 2008 (with the 1G-FE being the final variant). Nissan's first straight-six engine was the 1950–1952 Nissan NAK flathead petrol engine, which continued in various forms until production of the Nissan P engine ended in 2003. The 1963-1965 Nissan K overhead valve petrol engine was used in

836-586: A straight six version of the Chrysler flathead petrol engine. This was replaced by the 1959–2000 Chrysler Slant-6 overhead valve straight-six petrol engine, which was so named due to the 30-degree angle used to reduce the height of the engine (with the trade-off of a wider engine). The Slant-6 was released in the Dodge Dart economy car and used in many models until a V6 engine replaced it after 30 years. The Chevrolet Stovebolt overhead valve straight-six petrol engine

SECTION 10

#1732855507698

912-496: A straight-six engine compare favorably with the more common straight-four engines and V6 engines , which experience significant secondary dynamic imbalance, resulting in engine vibration. As engine reciprocating forces increase with the cube of piston bore, the straight-six is a preferred configuration for large truck engines. An even-firing six-cylinder two-stroke engine requires ignitions at 60° intervals, or else it would run with simultaneous ignitions and be no smoother than

988-415: A straight-six was the 1961–1969 Alfa Romeo 2600 executive car before the company switched to V6 engines. Mercedes-Benz's history of straight-six engines began with the 1913 Mercedes D.I aircraft engine. The first automotive straight-six engine was the 1924–1929 Daimler M836 3.9 L petrol engine. Following World War 2, Mercedes resumed production of straight-six engines with the 1951 introduction of

1064-401: A time when regulations dictated a maximum displacement of 550 cc; the maximum size is currently at 660 cc. Straight-four engines with the preferred crankshaft configuration have perfect primary balance . This is because the pistons are moving in pairs, and one pair of pistons is always moving up at the same time as the other pair is moving down. However, straight-four engines have

1140-412: Is a piston engine with six cylinders arranged in a straight line along the crankshaft . A straight-six engine has perfect primary and secondary engine balance , resulting in fewer vibrations than other designs of six or fewer cylinders. Until the mid-20th century, the straight-six layout was the most common design for engines with six cylinders. However, V6 engines became more common in the 1970s. By

1216-402: Is due to the front and rear trio of cylinders moving in pairs (albeit 360° out of phase), thus canceling out the rocking motion present in a straight-three engine . The secondary balance is due to the crank throws being arranged in three planes offset at 120°, resulting in the non-sinusoidal forces summing to zero for all free forces until the sixth order. The engine balance characteristics of

1292-496: Is no power stroke occurring at certain times. Compared with a V4 engine or a flat-four engine , a straight-four engine only has one cylinder head , which reduces complexity and production cost. Petrol straight-four engines used in modern production cars typically have a displacement of 1.3–2.5 L (79–153 cu in), but larger engines have been used in the past, for example the 1927–1931 Bentley 4½ Litre . Diesel engines have been produced in larger displacements, such as

1368-509: Is particularly beneficial in the higher rpm range, and " big-bang firing order " theory says the irregular delivery of torque to the rear tire makes sliding in the corners at racing speeds easier to control. Inline-four engines are also used in MotoGP by the Suzuki (since 2015 ) and Yamaha (since 2002 ) teams. In 2010 , when the four-stroke Moto2 class was introduced, the engines for the class were

1444-460: Is the German brand BMW , which has always used a straight-six layout for its six-cylinder engines. Since 2017, the trend of switching to V6 engines has reversed due to the ability to create a modular engine family of straight engines sharing many components. Examples include the 2017–present Mercedes-Benz M256 engine , the 2019–present Jaguar Land Rover Ingenium engines (AJ300 and AJ300D versions),

1520-556: The BMW M337 (produced until 1958). Production of straight-six engines resumed in 1968 with the BMW M30 single overhead camshaft engine, built for 27 years and used in various models. The 1978–1989 BMW M88 engine was a double overhead camshaft design that was introduced in the BMW M1 mid-engine sport car. BMW's introduction of turbocharged straight-six engines (aside from the low-volume variants of

1596-500: The Duramax Straight-6 turbocharged diesel engine has been available in several General Motors SUV and light truck models since 2020. On March 25, 2022, Stellantis announced their new turbocharged straight-six engine, called Hurricane. Two outputs are available, a standard 400 or 500 hp (298 or 373 kW; 406 or 507 PS) high performance rated at 450 or 475 pound force-feet (610 or 644 N⋅m) of torque. The turbos on

SECTION 20

#1732855507698

1672-522: The Ford 240 I6 from 1965 through 1972. The Ford 300 cu in (4.9 L) version of the straight-six engine was built from 1965 until 1996, with notable uses in trucks, SUVs, and vans. However, Ford straight-sixes were replaced by V6 engines in passenger cars during the mid-1970s. In 1908, the Oldsmobile Model Z was powered by a flathead straight-six petrol engine, which was produced until 1912 (in

1748-652: The Ford Falcon large sedan was introduced with a locally-built version of the American Ford Straight-6 overhead valve engine. In 1998, these engines were upgraded to a single overhead camshaft design. This was followed in 2002 by the Ford Barra dual overhead camshaft engine in 2002, which was produced in both naturally aspirated and turbocharged versions. The Ford Barra engine remained in use until Ford Australia ceased local production in 2016. The Chrysler Valiant

1824-465: The Maserati 4CL and various English Racing Automobiles (ERA) models. These were resurrected after the war, and formed the foundation of what was later to become Formula One , although the straight-eight supercharged Alfettas would dominate the early years of F1. Another engine that played an important role in racing history is the straight-four Ferrari engine designed by Aurelio Lampredi . This engine

1900-661: The Mercedes-Benz M180 overhead camshaft engine. In 1985, the Mercedes-Benz OM603 3.0 L diesel straight-six engine was introduced. In 1996, the company replaced its petrol straight-sixes with a series of V6 engines, although it continued producing diesel straight-six engines. Production of petrol straight-six engines resumed in 2017 with the introduction of the Mercedes-Benz M256 turbocharged DOHC engine. Opel began production of straight-six engines in 1927 with

1976-637: The Nissan Cedric Special 50 luxury car. Using a similar design, the Nissan H30 engine was used in several luxury cars from 1965 through 1989. In 1966, Nissan began production of the six-cylinder versions of the Nissan L single overhead camshaft engine, which was produced until 2009. The 1985–2004 Nissan RB engine , used in the Nissan Skyline and several other cars, was produced in single overhead camshaft and dual overhead camshaft configurations until

2052-687: The Nissan Skyline GT-R ) was based on the Prince G engine. Mitsubishi produced six-cylinder versions of the Mitsubishi KE engine from 1963 to 1970, as well as the rare six-cylinder versions of the Mitsubishi 6G34 version of the single overhead camshaft "Saturn" engine from 1970 to 1976. The 2000–2006 Daewoo Magnus (also called the Chevrolet Evanda, Chevrolet Epica, Holden Epica, or Suzuki Verona)

2128-523: The Oldsmobile Limited luxury car) in displacements of 453 cu in (7.4 L), 505 cu in (8.3 L) and 706 cu in (11.6 L). Oldsmobile's next straight-six engine was introduced in the 1913 Oldsmobile Six luxury car, initially with a displacement of 380 cu in (6.2 L), followed by a displacement of 177 cu in (2.9 L) for the 1917-1921 Oldsmobile Model 37 luxury car. The later generations of

2204-521: The Oldsmobile Straight-6 also used a flathead design from its introduction in the 1923 Oldsmobile Model 30 luxury car until it was replaced in 1950 by Oldsmobile's V8 engine. The 1913–1929 Oakland Six luxury car was powered by a flathead petrol engine produced in displacements of 177 cu in (2.9 L) and 334 cu in (5.5 L). In 1926, the Pontiac Six was introduced as

2280-521: The 1920s and early 1930s. The Miller engine evolved into the Offenhauser engine which had a highly successful spanning from the 1933 until 1981, including five straight victories at the Indianapolis 500 from 1971 to 1976. Many cars produced for the pre-WWII voiturette Grand Prix motor racing category used inline-four engine designs. 1.5 L supercharged engines found their way into cars such as

2356-664: The 1938 Jaguar 3½ Litre sports saloon/coupe and the 1948 Jaguar Mark V luxury car. The 1927 Rover Two-litre luxury car introduced the company's IOE straight-six petrol engine. This engine was used in various Rover models until the Rover P5 was discontinued in 1973, and in various Land Rover models from the 1961 Land Rover Series IIA until 1980 Land Rover Series III . The 1928 Austin 20/6 luxury car introduced Austin's flathead straight-six petrol engine. The 1938-1939 Austin Twenty-Eight used an enlarged version of this engine. This

BMW K1600 - Misplaced Pages Continue

2432-441: The 1970s. Since then, the inline-four has become one of the most common engine configurations in street bikes. Outside of the cruiser category, the inline-four is the most common configuration because of its relatively high performance-to-cost ratio. All major Japanese motorcycle manufacturers offer motorcycles with inline-four engines, as do MV Agusta and BMW . BMW's earlier inline-four motorcycles were mounted horizontally along

2508-454: The 1998–2006 Volvo S80 ) used the uncommon design of a transversely-mounted straight-six engine. Production of Volvo straight-six engines ceased in 2015. BMW's first product was the 1917 BMW IIIa straight-six aircraft engine. The company began production of automotive straight-six engines in 1933 with the BMW M78 petrol engine, a 1.2 L overhead valve design that evolved over the years into

2584-469: The 2.4 litre Citroën DS engine, the 2.6 litre Austin-Healey 100 engine, the 3.3 L Ford Model A (1927) engine and the 2.5 L GM Iron Duke engine . Soviet/Russian GAZ Volga and UAZ engines with displacements of up to 2.9 litres were produced without balance shafts from the 1950s to the 1990s, however these were relatively low-revving engines which reduces the need for a balance shaft system. Most modern straight-four engines used in cars have

2660-465: The 2000s, V6 engines replaced most straight-six engines. In terms of packaging, straight-six engines are almost always narrower than a V6 engine or V8 engine , but longer than straight-four engines , V6s, and most V8s. Straight-six engines are typically produced in displacements ranging from 2 to 4 L (122 to 244 cu in), however engines ranging in size from the 0.7 L (43 cu in) Benelli 750 Sei motorcycle engine to

2736-562: The 2021–present Stellantis Hurricane engine and the 2022–present Mazda Skyactiv-X and Skyactiv-D engines. Alfa Romeo's first production straight-six engine - 6.3 L flathead petrol engine - was introduced in 1921 in the Alfa Romeo G1 luxury car. An overhead valve design was introduced in the 1922 Alfa Romeo RL sports car, and an overhead camshaft design was used in the 1927 Alfa Romeo 6C sports car and various racing cars from 1927 until 1954. The last Alfa Romeo model using

2812-401: The 6.7 L (409 cu in) Cummins B Series engine pickup truck engine have also been produced. Due to its well-balanced configuration, the straight-six can be scaled up to substantial sizes for heavy trucks, locomotives, industrial and marine use. If an appropriate firing order is used, a straight-six engine has perfect primary and secondary engine balance . The primary balance

2888-700: The Hurricane Standard Output deliver a peak boost of 22 psi, while the Hurricane High Output turbos deliver 26 psi of peak boost. The 3.0 L Hurricane is produced at Stellantis’ Saltillo Engine Plant in Mexico. Toyota's first straight-six engine was the Toyota Type A , produced from 1935 through 1947. The Type A was an overhead-valve petrol engine based on the Chevrolet Stovebolt engine. This

2964-497: The M30 engine in the 1980s) was in 2006 BMW N54 and the production of naturally aspirated engines ceased in 2015. As of 2022 , the BMW B58 turbocharged straight-six engine remains in production, along with its higher performance BMW S58 variants. Rolls-Royce's first straight-six engine was a 6.0 L IOE petrol engine, which was used in the 1905 Rolls-Royce 30 hp luxury car. This car

3040-643: The Opel CIH engine continued until 1993, when a V6 engine replaced it. Volvo began production of straight-six engines with the 1929–1958 Penta DB flathead petrol engines. The company resumed production in 1969 with the Volvo B30 overhead valve petrol engine, followed by the straight-six versions of the Volvo Modular Engine introduced in 1995 and then the Volvo SI6 engine introduced in 2006. Several models (such as

3116-506: The Peugeot engine which won the 1913 Indianapolis 500 was a highly influential engine. Designed by Ernest Henry , this engine had double overhead camshafts (DOHC) with four valves per cylinder, a layout that would become the standard until today for racing inline-four engines. Amongst the engines inspired by the Peugeot design was the Miller engine , which was a successful racing engine through

BMW K1600 - Misplaced Pages Continue

3192-633: The United States, Nimbus in Denmark, Windhoff in Germany, and Wilkinson in the United Kingdom. The first across-the-frame 4-cylinder motorcycle was the 1939 racer Gilera 500 Rondine , it also had double-over-head camshafts, forced-inducting supercharger and was liquid-cooled . Modern inline-four motorcycle engines first became popular with Honda 's SOHC CB750 introduced in 1969, and others followed in

3268-729: The Year awards. UK weekly newspaper Motor Cycle News named the K1600GT as Best Tourer at its MCN Awards 2011. Motorcyclist road tested the K1600GTL against the Honda Gold Wing and preferred the Honda. They did note that the additions on the K1600GTL over the K1600GT worked against it, and concluded that the latter was the better bike. Straight-six engine The straight-six engine (also referred to as an inline-six engine ; abbreviated I6 or L6)

3344-525: The application. The six pistons with six unique phases cannot be "paired" as in the four-stroke case. The Detroit engines used a configuration that, once the primary rocking couple was balanced out, was also perfectly balanced at all other rocking couples until the 6th order. Mercury came to use a configuration that canceled only the primary rocking couple and was run without a balancer. The reciprocating masses of all configurations are still imbalanced at only 6th-order and up in their plane of motion. Still,

3420-465: The balance of kinetic energy exchange between pistons has improved to a residual 6th-order-and-up inertial torque oscillation compared with the four-stroke design being imbalanced at 3rd-order and up. Crankshafts for straight-six engines usually have either four main bearings (i.e., a bearing in between each pair of crankpins and one at each end) or seven main bearings (i.e., a bearing between every crankpin): The first production straight-six engine

3496-412: The cylinders oriented vertically), it is sometimes called a slant-four . Between 2005 and 2008, the proportion of new vehicles sold in the United States with four-cylinder engines rose from 30% to 47%. By the 2020 model year, the share for light-duty vehicles had risen to 59%. A four-stroke straight-four engine always has a cylinder on its power stroke, unlike engines with fewer cylinders where there

3572-471: The frame, but all current four-cylinder BMW motorcycles have transverse engines . The modern Triumph company has offered inline-four-powered motorcycles, though they were discontinued in favour of triples . The 2009 Yamaha R1 has an inline-four engine that does not fire at even intervals of 180°. Instead, it uses a crossplane crankshaft that prevents the pistons from simultaneously reaching top dead centre. This results in better secondary balance , which

3648-411: The headlights shine onto a mirror which keeps the beam level according to how the bike is pitched. The optional adaptive headlights include a servomotor that directs the headlight beam according to how the bike is leaning in a turn, effectively pointing the beam around the bend. To save weight, the motorcycle has a unique cast magnesium alloy subframe to which the front fairing is secured. The K1600

3724-554: The large 2,495 cc FPF that won the Formula One championship in Cooper 's chassis in 1959 and 1960. In Formula One, the 1980s were dominated by the 1,500 cc turbocharged cars. The BMW M12/13 engine was notable for the era for its high boost pressures and performance. The cast iron block was based on a standard road car block and powered the F1 cars of Brabham, Arrows and Benetton and won

3800-470: The narrowest in-line six-cylinder engine ever produced. Cylinder bore is 72.0 mm (2.83 in) and the distance between cylinder centres 77 mm (3.0 in). The camshafts are hollow, with cam lobes pressed on, which saves around 2 lb (0.91 kg). The engine has electronic throttle control and multiple drive modes which can be set according to road conditions. New technology for BMW on these models include adaptive headlights . As standard

3876-420: The other direction, which leads to a secondary dynamic imbalance that causes an up-and-down vibration at twice crankshaft speed. This imbalance is common among all piston engines, but the effect is particularly strong on four-stroke inline-four because of the two pistons always moving together. The strength of this imbalance is determined by the reciprocating mass, the ratio of connecting rod length to stroke, and

SECTION 50

#1732855507698

3952-405: The peak piston velocity. Therefore, small displacement engines with light pistons show little effect, and racing engines use long connecting rods. However, the effect grows quadratically with engine speed (rpm). Four-stroke engines with five or more cylinders are able to have at least one cylinder performing its power stroke at any given point in time. However, four-cylinder engines have gaps in

4028-399: The power delivery, since each cylinder completes its power stroke before the next piston starts a new power stroke. This pulsating delivery of power results in more vibrations than engines with more than four cylinders. A balance shaft system is sometimes used to reduce the vibrations created by a straight-four engine, most often in engines with larger displacements. The balance shaft system

4104-484: The world championship in 1983. The 1986 version of the engine was said to produce about 1,300 hp (969 kW) in qualifying trim. Belgian arms manufacturer FN Herstal , which had been making motorcycles since 1901, began producing the first motorcycles with inline-fours in 1905. The FN Four had its engine mounted upright with the crankshaft longitudinal . Other manufacturers that used this layout included Pierce , Henderson , Ace , Cleveland , and Indian in

4180-464: Was followed by an IOE version in 1916. The 1951 Hudson Hornet introduced a 308 cu in (5.0 L) flathead straight-six engine. These engines dominated dirt track and NASCAR racing at the time. Production of the Hudson I6 continued after the 1954 merger forming American Motors Corporation and was eventually replaced by a new Rambler V8 after 1956. In 1924, Chrysler began production of

4256-574: Was followed by the AJ6 and AJ16 engines, produced from 1984 to 1996, before being replaced by a Ford-derived V6 engine. The 1948–1959 Lagonda straight-6 dual overhead camshaft petrol engine was used in various Aston Martin and Lagonda cars. This engine's successor was the Tadek Marek-designed straight-six used in the DB4 (1958), DB5 (1963), DB6 (1965) and DBS (1967). The Ford Zephyr 6 overhead valve engine

4332-412: Was followed by the 1962–1988 Chevrolet Turbo-Thrift engine (also using an overhead valve design), which was replaced by various General Motors V6 engines. The 1952 through 2006 AMC Straight-6 petrol engine initially used a flathead design before being upgraded to an overhead valve design in 1956. A new I6 design with a short stroke and seven main bearing crankshaft was introduced in 1964. The engine

4408-423: Was followed by the first generation Toyota F overhead valve engine, which was produced from 1949 to 1975, which in turn was followed by the 2F version from 1975 to 1988 and the fuel-injected 3F / 3FE version from 1988 to 1992. This was replaced by the dual overhead camshaft Toyota FZ engine , produced from 1993 until 2008. Produced alongside these engines was the single overhead camshaft Toyota M engine , which

4484-525: Was introduced in 1929 as a replacement for the brand's straight-four engines and was produced in displacements of 181 cu in (3.0 L), 194 cu in (3.2 L) and 207 cu in (3.4 L). The second generation of this engine family - often referred to as the Blue Flame engine - was produced from 1937 to 1962 in displacements of 216 cu in (3.5 L), 235 cu in (3.9 L) and 261 cu in (4.3 L). This

4560-598: Was introduced in 1962, powered by the American Chrysler Slant 6 . In 1970, the Valiant switched to the Chrysler Hemi-6 overhead valve engine, an Australia-only engine that was produced until Chrysler Australia ceased production of large cars in 1981. Straight-four engine A straight-four engine (also referred to as an inline-four engine ) is a four-cylinder piston engine where cylinders are arranged in

4636-407: Was introduced in 1965 and produced over seven generations until 1993 (with the 7M-GTE being the final version of the M engine). The M engine was replaced by the dual overhead camshaft Toyota JZ engine , which was produced from 1990 to 2007 and is arguably known as Toyota's best straight-six engine. Toyota's third line of straight-six engines was the 2.0 L Toyota G engine , which was released as

SECTION 60

#1732855507698

4712-646: Was introduced in the Willys Jeep Station Wagon . At the time of its introduction, the Tornado engine had the lowest specific fuel consumption of an American gasoline (petrol) engine. The Tornado engine was replaced by the AMC I6 engine. In 2001, General Motors resumed production of straight-six engines with the Vortec 4200 dual overhead camshaft petrol engine. This engine was used in various SUV models until 2009. Also,

4788-634: Was introduced in the Dutch Spyker 60 HP racing car in 1903. Straight-six engines increased in popularity in the years after and by 1909, approximately 80 manufacturers were using them (including 62 in the United Kingdom). Prior to the 1950s, V6 engines were rarely used, due to the poorer engine balance of V6 engines compared to straight-six engines. Since the 1980s, however, the shorter length of V6 engines has seen most manufacturers replace straight-six engines with V6 engines. An exception to this trend

4864-437: Was invented in 1911 and consists of two shafts carrying identical eccentric weights that rotate in opposite directions at twice the crankshaft's speed. This system was patented by Mitsubishi Motors in the 1970s and has since been used under licence by several other companies. Not all large displacement straight-four engines have used balance shafts, however. Examples of relatively large engines without balance shafts include

4940-559: Was originally designed as a 2 L Formula 2 engine for the Ferrari 500, but evolved to 2.5 L to compete in Formula One in the Ferrari 625. For sports car racing, capacity was increased up to 3.4 L for the Ferrari 860 Monza. The Coventry Climax straight-four engine was also a very successful racing engine, which began life as a 1.5 litre Formula 2 engine. Enlarged to 2.0 litres for Formula One in 1958, it evolved into

5016-522: Was powered by a 1.3-1.6 L overhead camshaft straight-six petrol engine. The 1931–1932 MG F-type tourers, 1932–1934 MG K-type sports cars, and 1934–1936 MG N-type sports cars were powered by an overhead camshaft straight-six petrol engine. During the mid-1930s, the Riley MPH sports car and Riley Kestrel 6 saloon were produced in small numbers and were powered by dual overhead camshaft straight-six petrol engine. The 1947 Bristol 400 luxury car

5092-597: Was powered by an overhead valve straight-six petrol engine based on the design of the BMW M328 engine. This engine remained in use until the Bristol 406 was discontinued in 1961. The dual overhead camshaft Jaguar XK6 engine petrol engine was produced from 1948 to 1992 in the Jaguar XK120 sports car. Introduced as a 3.4 L, it was used in passenger and racing cars, produced in displacements of 2.4 to 4.2 L. The XK6 engine

5168-558: Was powered by the Daewoo XK6 straight-six petrol engine, which is one of the few straight-six engines to be used in a transverse engine front-wheel drive car. From the 1950s to the 2010s, many cars produced in Australia were powered by a straight-six engine. Holden's first car, the 1948 Holden 48-215 sedan, was powered by the Holden 'grey' motor , an overhead valve petrol engine. This engine

5244-419: Was redesigned for the 2022 model year to include an all-digital instrument cluster with 10.25-inch (260 mm) color display. Navigation is integrated with the same display. In July 2011, US magazine Cycle World named the K1600GT as its best sport touring motorcycle , and the K1600GTL as the best touring motorcycle for 2011. Motorcyclist named the K1600GT as Best Touring Bike in its 2011 Motorcycle of

5320-419: Was replaced by Chevrolet's straight-six engine and Buick's V6 engine. a The overhead valve Buick Straight-6 petrol engine was introduced in the 1914 Buick Six luxury car and was produced until 1930. Buick did not make another six-cylinder engine until they introduced a V6 engine in 1962. The 1916 through 1926 Hudson Super Six was powered by a 289 cu in (4.7 L) straight-six petrol engine. This

5396-592: Was replaced by the Austin D-Series engine , an overhead valve engine initially designed for trucks, which was used in passenger cars from 1947 until 1968 (along with several Jensen Motors models from 1946 to 1962). The overhead valve BMC C-Series was used by various BMC brands from 1954 to 1971, followed by the 2.2 L version of the BMC E-Series overhead camshaft engine, which was produced from 1970 until 1982. The 1930–1936 Wolseley Hornet six lightweight car

5472-521: Was replaced by the Holden 'red' motor , which was produced from 1963 to 1980 and in turn followed by the 1980–1984 Holden 'blue' motor . The final locally produced Holden straight-six was the 1984–1986 Holden 'black' motor , which was initially replaced by the Japanese-built Nissan RB30 engine before Holden switched to a locally-built V6 engine. Ford produced straight-six engines for the longest time of any Australian manufacturer. In 1960,

5548-473: Was replaced by the 1906–1926 Rolls-Royce Silver Ghost , which switched to a flathead (side-valve) design for its straight-six engine. In 1906, the Standard Six luxury car was introduced, powered by a 20 hp (15 kW; 20 PS) I6 petrol engine. Standard's engines were also used in several cars built by SS Cars and its successor Jaguar, such as the 1932 SS 1 sports car, the 1936 SS Jaguar 100 and

5624-460: Was rugged, reliable, and became noted for longevity. A turbocharged racing engine based on the AMC Straight-6 engine block produced 875 hp (652 kW) and competed in the 1978 Indianapolis 500 race. The final application for the AMC Straight-6 engine was the 2006 Jeep Wrangler (TJ) , after which a V6 replaced it. The 1962 through 1973 Jeep Tornado overhead camshaft straight-six engine

5700-560: Was used in several of the company's sports cars. The 1906–1908 Ford Model K luxury car used a 405 cu in (6.6 L) straight-six petrol engine and was the only Ford six-cylinder passenger car engine until the 1940s. The Ford flathead I6 was produced from 1941 until 1951, followed by the Ford OHV I6 overhead valve engine from 1952 through 1964, then the Ford Thriftpower Six overhead valve engine from 1960 until 1982, and

5776-716: Was used in the Ford Zephyr executive car and several other models from 1951 to 1966. The Triumph I6 overhead valve straight-six petrol engine was produced from 1960 to 1977 and debuted in the Standard Vanguard Six sports saloon. The Leyland PE166 engine was loosely based on the Triumph design and was produced from 1977 to 1986. The 1972–1977 TVR 2500M sports car was powered by the Triumph I6 engine. Then, from 1999 to 2007, TVR's own TVR Speed Six dual overhead camshaft engine

#697302