Misplaced Pages

#829170

58-454: The Gregor FDB-1 was a Canadian biplane fighter , designed in 1938 by Michael Gregor and manufactured by Canadian Car and Foundry . Despite having some advanced design features such as flush rivetted all-metal construction and a retractable undercarriage, the final generation of biplane fighters was being supplanted by monoplanes and the Gregor FDB-1 was obsolete before it flew. Despite

116-471: A flush-riveted aluminum stressed-skin . 95 US gallons (360 litres; 79 imperial gallons) of fuel was carried in a pair of semicircular tanks mounted side-by-side between the wheel wells. The structure was stressed 60 percent above requirements. A pair of fuselage-mounted .50 cal. machine guns, synchronized to fire through the Hamilton Standard propeller's disk, were part of the design, but the armament

174-646: A W shape cabane, however as it does not connect the wings to each other, it does not add to the number of bays. Large transport and bombing biplanes often needed still more bays to provide sufficient strength. These are often referred to as multi-bay biplanes . A small number of biplanes, such as the Zeppelin-Lindau D.I have no interplane struts and are referred to as being strutless . Because most biplanes do not have cantilever structures, they require rigging wires to maintain their rigidity. Early aircraft used simple wire (either braided or plain), however during

232-412: A biplane aircraft, two wings are placed one above the other. Each provides part of the lift, although they are not able to produce twice as much lift as a single wing of similar size and shape because the upper and the lower are working on nearly the same portion of the atmosphere and thus interfere with each other's behaviour. In a biplane configuration with no stagger from the upper wing to the lower wing,

290-554: A biplane without the weight of 8 machine guns, or armour to slow it down, the FDB-1 demonstrated amazing maneuverability and despite a speed advantage, the RCAF's Hawker Hurricane Mk.I monoplanes were unable to turn with it below 15,000 ft (4,600 m). Can-Car entered it in the January 1940 New York-to-Miami air race in a final effort to generate interest but shortly after takeoff oil pressure

348-412: A dark gloss metallic gray. Can-Car test pilot George Adye carried out its first test flight on 17 December 1938, from Can-Car's Bishopfield Airport . He noted the gull wing severely restricted downward and forward visibility. Another test pilot succinctly described it as being "blind as hell." While enthusiastic over its maneuverability, the controls were overly sensitive and the flaps lowered too far. On

406-608: A documented jet-kill, as one Lockheed F-94 Starfire was lost while slowing down to 161 km/h (100 mph) – below its stall speed – during an intercept in order to engage the low flying Po-2. Later biplane trainers included the de Havilland Tiger Moth in the Royal Air Force (RAF), Royal Canadian Air Force (RCAF) and others and the Stampe SV.4 , which saw service postwar in the French and Belgian Air Forces. The Stearman PT-13

464-509: A faster and more comfortable successor to the Dragon. As the available engine power and speed increased, the drag penalty of external bracing increasingly limited aircraft performance. To fly faster, it would be necessary to reduce external bracing to create an aerodynamically clean design; however, early cantilever designs were either too weak or too heavy. The 1917 Junkers J.I sesquiplane utilized corrugated aluminum for all flying surfaces, with

522-422: A given wing area. However, interference between the airflow over each wing increases drag substantially, and biplanes generally need extensive bracing, which causes additional drag. Biplanes are distinguished from tandem wing arrangements, where the wings are placed forward and aft, instead of above and below. The term is also occasionally used in biology , to describe the wings of some flying animals . In

580-507: A minimum of struts; however, it was relatively easy to damage the thin metal skin and required careful handling by ground crews. The 1918 Zeppelin-Lindau D.I fighter was an all-metal stressed-skin monocoque fully cantilevered biplane, but its arrival had come too late to see combat use in the conflict. By the 1930s, biplanes had reached their performance limits, and monoplanes become increasingly predominant, particularly in continental Europe where monoplanes had been increasingly common from

638-463: A small degree, but more often was used to improve access to the cockpit. Many biplanes have staggered wings. Common examples include the de Havilland Tiger Moth , Bücker Bü 131 Jungmann and Travel Air 2000 . Alternatively, the lower wing can instead be moved ahead of the upper wing, giving negative stagger, and similar benefits. This is usually done in a given design for structural reasons, or to improve visibility. Examples of negative stagger include

SECTION 10

#1732852725830

696-473: A somewhat unusual sesquiplane arrangement, possessing a more substantial lower wing with two spars that eliminated the flutter problems encountered by single-spar sesquiplanes. The stacking of wing planes was suggested by Sir George Cayley in 1843. Hiram Maxim adopted the idea for his steam-powered test rig, which lifted off but was held down by safety rails, in 1894. Otto Lilienthal designed and flew two different biplane hang gliders in 1895, though he

754-476: A subsequent landing, the prototype was flipped on its back, although damage was minimal. RCAF testers achieved a top speed of 261 mph (420 km/h) at 13,100 ft (4,000 m), with the same 700 hp (520 kW) Pratt & Whitney R-1535 -72 engine used by the Grumman F3F -1 to attain 231 mph (372 km/h). However, this was without military equipment such as guns, ammunition or armour, and

812-547: Is better known for his monoplanes. By 1896 a group of young men in the United States, led by Octave Chanute , were flying hang gliders including biplanes and concluded that the externally braced biplane offered better prospects for powered flight than the monoplane. In 1903, the Wright Flyer biplane became the first successful powered aeroplane. Throughout the pioneer years, both biplanes and monoplanes were common, but by

870-524: The Bristol M.1 , that caused even those with relatively high performance attributes to be overlooked in favour of 'orthodox' biplanes, and there was an allegedly widespread belief held at that time that monoplane aircraft were inherently unsafe during combat. Between the years of 1914 and 1925, a clear majority of new aircraft introduced were biplanes; however, during the latter years of the First World War,

928-638: The First World War -era Fokker D.VII fighter and the Second World War de Havilland Tiger Moth basic trainer. The larger two-seat Curtiss JN-4 Jenny is a two bay biplane , the extra bay being necessary as overlong bays are prone to flexing and can fail. The SPAD S.XIII fighter, while appearing to be a two bay biplane, has only one bay, but has the midpoints of the rigging braced with additional struts; however, these are not structurally contiguous from top to bottom wing. The Sopwith 1½ Strutter has

986-684: The Grumman Ag Cat are available in upgraded versions with turboprop engines. The two most produced biplane designs were the 1913 British Avro 504 of which 11,303 were built, and the 1928 Soviet Polikarpov Po-2 of which over 20,000 were built, with the Po-2 being the direct replacement for the Soviet copy of the Avro 504. Both were widely used as trainers. The Antonov An-2 was very successful too, with more than 18,000 built. Although most ultralights are monoplanes,

1044-595: The Lite Flyer Biplane, the Sherwood Ranger , and the Murphy Renegade . The feathered dinosaur Microraptor gui glided, and perhaps even flew, on four wings, which may have been configured in a staggered sesquiplane arrangement. This was made possible by the presence of flight feathers on both forelimbs and hindlimbs, with the feathers on the forelimbs opening to a greater span. It has been suggested that

1102-539: The Nieuport-Delage NiD 42 / 52 / 62 series, Fokker C.Vd & e, and Potez 25 , all serving across a large number of air forces. In the general aviation sector, aircraft such as the Waco Custom Cabin series proved to be relatively popular. The Saro Windhover was a sesquiplane with the upper wing smaller than the lower, which was a much rarer configuration than the reverse. The Pfalz D.III also featured

1160-467: The Royal Canadian Air Force 's desperation for modern fighters, the sole example remained unsold and was eventually lost in a fire in 1945. The Gregor FDB-1's model designation stood for F ighter D ive B omber indicating its intended roles. In 1938, Georgian expatriate designer Mikheil Grigorashvili (anglicized as Michael Gregor) joined with Canadian Car and Foundry , which at that time

1218-494: The Sopwith Dolphin , Breguet 14 and Beechcraft Staggerwing . However, positive (forward) stagger is much more common. The space enclosed by a set of interplane struts is called a bay (much as the architectural form is used), hence a biplane or triplane with one set of such struts connecting the wings on each side of the aircraft is a single-bay biplane . This provided sufficient strength for smaller aircraft such as

SECTION 20

#1732852725830

1276-419: The lift coefficient is reduced by 10 to 15 percent compared to that of a monoplane using the same airfoil and aspect ratio . The lower wing is usually attached to the fuselage , while the upper wing is raised above the fuselage with an arrangement of cabane struts , although other arrangements have been used. Either or both of the main wings can support ailerons , while flaps are more usually positioned on

1334-503: The CR.42 was able to achieve success in the defensive night fighter role against RAF bombers that were striking industrial targets throughout northern Italy. The British Fleet Air Arm operated the Fairey Swordfish torpedo bomber from its aircraft carriers, and used the type in the anti-submarine warfare role until the end of the conflict, largely due to their ability to operate from

1392-518: The Caribou , performed the first non-stop flight between the Canadian mainland and Britain in 30 hours 55 minutes, although the intended target for this long distance flight had originally been Baghdad , Iraq . Despite its relative success, British production of the Dragon was quickly ended when in favour of the more powerful and elegant de Havilland Dragon Rapide , which had been specifically designed to be

1450-503: The First World War, the British Royal Aircraft Factory developed airfoil section wire named RAFwire in an effort to both increase the strength and reduce the drag. Four types of wires are used in the biplane wing structure. Drag wires inside the wings prevent the wings from being folded back against the fuselage, running inside a wing bay from the forward inboard corner to the rear outboard corner. Anti-drag wires prevent

1508-565: The French Nieuport 17 and German Albatros D.III , offered lower drag than a conventional biplane while being stronger than a monoplane. During the Interwar period , numerous biplane airliners were introduced. The British de Havilland Dragon was a particularly successful aircraft, using straightforward design to could carry six passengers on busy routes, such as London-Paris services. During early August 1934, one such aircraft, named Trail of

1566-644: The Germans had been experimenting with a new generation of monoplanes, such as the Fokker D.VIII , that might have ended the biplane's advantages earlier had the conflict not ended when it had. The French were also introducing the Morane-Saulnier AI , a strut-braced parasol monoplane , although the type was quickly relegated to the advanced trainer role following the resolution of structural issues. Sesquiplane types, which were biplanes with abbreviated lower wings such as

1624-407: The biplane naturally has a deep structure and is therefore easier to make both light and strong. Rigging wires on non-cantilevered monoplanes are at a much sharper angle, thus providing less tension to ensure stiffness of the outer wing. On a biplane, since the angles are closer to the ideal of being in direct line with the forces being opposed, the overall structure can then be made stiffer. Because of

1682-419: The cockpit with a switch that opened the cone, deployed the chute and released the connecting cable. The metal wing structure was fabric covered behind the front spar as were the metal-framed control surfaces. The top wing featured full span slats, plus all-metal split flaps between the wing roots and ailerons. The bottom wing also incorporated split flaps. The center section of the top wing curved down to meet

1740-598: The competition aerobatics role and format for such a biplane well-defined by the mid-1930s by the Udet U 12 Flamingo and Waco Taperwing . The Pitts Special dominated aerobatics for many years after World War II and is still in production. The vast majority of biplane designs have been fitted with reciprocating engines . Exceptions include the Antonov An-3 and WSK-Mielec M-15 Belphegor , fitted with turboprop and turbofan engines respectively. Some older biplane designs, such as

1798-470: The drag from the number of struts used. The structural forces acting on the spars of a biplane wing tend to be lower as they are divided between four spars rather than two, so the wing can use less material to obtain the same overall strength and is therefore lighter. A given area of wing also tends to be shorter, reducing bending moments on the spars, which then allow them to be more lightly built as well. The biplane does however need extra struts to maintain

Canadian Car and Foundry FDB-1 - Misplaced Pages Continue

1856-542: The end of World War I . At the start of World War II , several air forces still had biplane combat aircraft in front line service but they were no longer competitive, and most were used in niche roles, such as training or shipboard operation, until shortly after the end of the war. The British Gloster Gladiator biplane, the Italian Fiat CR.42 Falco and Soviet I-153 sesquiplane fighters were all still operational after 1939. According to aviation author Gianni Cattaneo,

1914-502: The fuselage, in a gull-wing configuration like earlier Polish and Soviet fighters such as the Polikarpov I-153 . The wings were braced with "V" interplane struts. Instead of flying and landing wires, a single strut ran between the root of the top wing and the foot of the V strut on the lower wing on each side. Torque tubes moved the control surfaces, except for the rudder, which was partially operated by cables. A wood wind tunnel model

1972-416: The gap between the wings, which add both weight and drag. The low power supplied by the engines available in the first years of aviation limited aeroplanes to fairly low speeds. This required an even lower stalling speed, which in turn required a low wing loading , combining both large wing area with light weight. Obtaining a large enough wing area without the wings being long, and thus dangerously flexible

2030-543: The hind limbs could not have opened out sideways but in flight would have hung below and slightly behind the fore limbs. Pratt %26 Whitney R-1535 Twin Wasp Junior The Pratt & Whitney R-1535 Twin Wasp Junior is an American aircraft engine developed in the 1930s. The engine was introduced in 1932 as a 14-cylinder version of the 9-cylinder R-985 , and was a two-row, air-cooled radial design. Displacement

2088-612: The low speeds and simple construction involved have inspired a small number of biplane ultralights, such as Larry Mauro's Easy Riser (1975–). Mauro also made a version powered with solar cells driving an electric motor called the Solar Riser . Mauro's Easy Riser was used by "Father Goose", Bill Lishman . Other biplane ultralights include the Belgian-designed Aviasud Mistral , the German FK12 Comet (1997–),

2146-519: The lower wing. Bracing is nearly always added between the upper and lower wings, in the form of interplane struts positioned symmetrically on either side of the fuselage and bracing wires to keep the structure from flexing, where the wings are not themselves cantilever structures. The primary advantage of the biplane over a monoplane is its ability to combine greater stiffness with lower weight. Stiffness requires structural depth and where early monoplanes had to have this provided with external bracing,

2204-482: The merits of the monoplane over the biplane in 1938, and Michael Gregor was one of them. All the major powers still operated biplanes in front line fighter units, however they were being replaced with monoplanes in every case. The hydraulically operated landing gear retracted into wells on the sides of the fuselage ahead of the lower wing. The fuselage of the Model 10 FDB-I was a monocoque shell of circular cross section with

2262-561: The most famed copies was the Siemens-Schuckert D.I . The Albatros D.III and D.V , which had also copied the general layout from Nieuport, similarly provided the backbone of the German forces during the First World War. The Albatros sesquiplanes were widely acclaimed by their aircrews for their maneuverability and high rate of climb. During interwar period , the sesquiplane configuration continued to be popular, with numerous types such as

2320-588: The night ground attack role throughout the Second World War. In the case of the Po-2, production of the aircraft continued even after the end of the conflict, not ending until around 1952. A significant number of Po-2s were fielded by the Korean People's Air Force during the Korean War , inflicting serious damage during night raids on United Nations bases. The Po-2 is also the only biplane to be credited with

2378-483: The outbreak of the First World War biplanes had gained favour after several monoplane structural failures resulted in the RFC's "Monoplane Ban" when all monoplanes in military service were grounded, while the French also withdrew most monoplanes from combat roles and relegated them to training. Figures such as aviation author Bruce observed that there was an apparent prejudice held even against newly-designed monoplanes, such as

Canadian Car and Foundry FDB-1 - Misplaced Pages Continue

2436-424: The reduced stiffness, wire braced monoplanes often had multiple sets of flying and landing wires where a biplane could easily be built with one bay, with one set of landing and flying wires. The extra drag from the wires was not enough to offset the aerodynamic disadvantages from having two airfoils interfering with each other however. Strut braced monoplanes were tried but none of them were successful, not least due to

2494-634: The relatively compact decks of escort carriers . Its low stall speed and inherently tough design made it ideal for operations even in the often severe mid-Atlantic weather conditions. By the end of the conflict, the Swordfish held the distinction of having caused the destruction of a greater tonnage of Axis shipping than any other Allied aircraft. Both the German Heinkel He 50 and the Soviet Polikarpov Po-2 were used with relative success in

2552-700: The series of Nieuport military aircraft—from the Nieuport 10 through to the Nieuport 27 which formed the backbone of the Allied air forces between 1915 and 1917. The performance of the Nieuport sesquiplanes was so impressive that the Idflieg (the German Inspectorate of flying troops) requested their aircraft manufacturers to produce copies, an effort which was aided by several captured aircraft and detailed drawings; one of

2610-415: The structural problems associated with monoplanes, but offered little improvement for biplanes. The default design for a biplane has the wings positioned directly one above the other. Moving the upper wing forward relative to the lower one is called positive stagger or, more often, simply stagger. It can increase lift and reduce drag by reducing the aerodynamic interference effects between the two wings by

2668-476: The top speed. Designed, built and flown in under eight months, the FDB-1 Model 10 was sent to the Royal Canadian Air Force for testing. Severe canopy vibrations were experienced at speed or during aerobatics, and testing was restricted until this was remedied. Further tests showed that Gregor's claims were overly optimistic and the RCAF doubted further refinements would make any difference. As can be expected from

2726-665: The two planes when the high pressure air under the top wing and the low pressure air above the lower wing cancel each other out. This means that a biplane does not in practice obtain twice the lift of the similarly-sized monoplane. The farther apart the wings are spaced the less the interference, but the spacing struts must be longer, and the gap must be extremely large to reduce it appreciably. As engine power and speeds rose late in World War I , thick cantilever wings with inherently lower drag and higher wing loading became practical, which in turn made monoplanes more attractive as it helped solve

2784-400: The upper and lower wings together. The sesquiplane is a type of biplane where one wing (usually the lower) is significantly smaller than the other. The word, from Latin, means "one-and-a-half wings". The arrangement can reduce drag and weight while retaining the biplane's structural advantages. The lower wing may have a significantly shorter span, or a reduced chord . Examples include

2842-482: The war. After several years in storage, the FDB-1 was destroyed in a Cartierville Airport hangar fire. Aviation in Canada. General characteristics Performance Armament Aircraft of comparable role, configuration, and era Biplane Biplanes offer several advantages over conventional cantilever monoplane designs: they permit lighter wing structures, low wing loading and smaller span for

2900-434: The wings from folding up, and run from the underside of the outer wing to the lower wing root. Conversely, landing wires prevent the wings from sagging, and resist the forces when an aircraft is landing, and run from the upper wing centre section to outboard on the lower wings. Additional drag and anti-drag wires may be used to brace the cabane struts which connect the fuselage to the wings, and interplane struts, which connect

2958-421: The wings from moving forward when the aircraft stops and run the opposite direction to the drag wires. Both of these are usually hidden within the wings, and if the structure is sufficiently stiff otherwise, may be omitted in some designs. Indeed many early aircraft relied on the fabric covering of the wing to provide this rigidity, until higher speeds and forces made this inadequate. Externally, lift wires prevent

SECTION 50

#1732852725830

3016-539: Was Canada's leading manufacturer of railroad rolling stock . He was hired to design a fighter. They wanted to enter the aircraft market, but had no experience in that industry. Instead of creating their own designs, Can-Car was producing aircraft under license that had been designed elsewhere. In 1936, Grumman and Canadian Car & Foundry or "Can-Car" concluded an agreement for production of 50 Grumman SF -1 biplane carrier fighters known as GE-23s or Grumman Export 23s, to be built in Canada. There were still some who doubted

3074-434: Was lost, forced the FDB-1 to land, disqualifying it. During testing two months later its landing gear collapsed. Although Mexican authorities were interested and a registration was reserved, the Canadian government refused an export license and there were no other prospective customers. Gregor claimed: "They'll start this war with monoplanes, but they'll finish it with biplanes." Neither his prediction nor his aircraft survived

3132-404: Was more readily accomplished with a biplane. The smaller biplane wing allows greater maneuverability . Following World War I, this helped extend the era of the biplane and, despite the performance disadvantages, most fighter aircraft were biplanes as late as the mid-1930s. Specialist sports aerobatic biplanes are still made in small numbers. Biplanes suffer aerodynamic interference between

3190-475: Was much lower than Canadian Car and Foundry's claims. Top speed was anticipated to reach 300 mph (480 km/h) with a 750 hp (560 kW) Pratt & Whitney R-1535-SB4-G, however installation of military equipment would have more than eliminated any gains. At the time of testing Gregor was redesigning it to accept the 1,200 hp (890 kW) Pratt & Whitney R-1830 Twin Wasp which he hoped would raise

3248-465: Was never installed. Additionally, two 116 lb (53 kg) bombs could be carried, one under each lower wing. The cockpit was enclosed with a rearward sliding canopy and the engine was faired in with a NACA cowling reminiscent of the Seversky monoplane fighters that Gregor had worked on. Among the new devices incorporated in the FDB-1 was an anti-spin parachute in the tailcone. The pilot activated it from

3306-569: Was sent to Hawker Aircraft in England for testing early in 1938, and construction of the prototype began in Thunder Bay shortly thereafter, with it completed in December 1938, "amid an atmosphere of war jitters, well salted with tales of German spies visiting the factory in disguise." When rolled out, the FDB-1 c/n 201 was registered CF-BMB , with the letters and ten horizontal rudder stripes in white over

3364-741: Was widely used by the United States Army Air Force (USAAF) while the US Navy operated the Naval Aircraft Factory N3N . In later civilian use in the US, the Stearman became particularly associated with stunt flying such as wing-walking , and with crop dusting, where its compactness worked well at low levels, where it had to dodge obstacles. Modern biplane designs still exist in specialist roles such as aerobatics and agricultural aircraft with

#829170