The Chicago and Aurora Railroad was a direct predecessor of the Chicago, Burlington and Quincy Railroad . Its original incorporation as the Aurora Branch Railroad , chartered in February 1849, started as a twelve-mile branch line which Class I giant BNSF cites as the beginning of their empire: this “short stretch of track set BNSF’s destiny into ‘loco-motion’ and grew over many decades into a network spanning 32,500 miles.” Beginning in 1853, as the Chicago and Aurora Railroad, the company's tracks eventually extended from Chicago to Mendota via Aurora, Illinois , also creating what would become the oldest commuter line in the Chicago area.
64-601: The Zephyr Rocket was an overnight passenger train operated jointly by the Chicago, Burlington and Quincy Railroad ("Burlington Route") and the Chicago, Rock Island and Pacific Railroad ("Rock Island Lines") between Saint Louis, Missouri and the Twin Cities of Saint Paul and Minneapolis , Minnesota , with major intermediate stops in Burlington , Cedar Rapids , and Waterloo, Iowa . The Chicago, Burlington & Quincy carried
128-449: A central role in bringing air brakes to freight service. The railroad had one of the first hump classification yards at its Cicero Avenue Yard in Chicago, allowing an operator in a tower to line switches remotely and allowing around-the-clock classification. The company also tested the twin cylinder car . Aurora Branch Railroad The Chicago and Aurora Railroad's first incarnation
192-579: A final freight train on the Leadville-Climax branch in Colorado. On July 1, 1965, Harry Murphy retired from his position as president of the CB&;Q (he remained on the railroad as a director until October), and former Frisco Railway president Louis W. Menk took over as president and CEO. During his presidency, Louis Menk explored ways to reduce costs for the CB&Q's passenger operations and to reshape
256-460: A light, powerful diesel engine that could stand the rigors of continuous, unattended daily service. The experiences of developing these engines can be summed up shortly by General Motors Research vice-president Charles Kettering : "I do not recall any trouble with the dip stick." Ralph Budd, accused of gambling on diesel power, chirped that "I knew that the GM people were going to see the program through to
320-553: A line from Aurora to a connection with this road, thus giving access to Chicago.” Village leaders in both Aurora and Batavia wanted to avoid the 38-mile wagon rides to and from Chicago, but they also worried about losing economic opportunities if the G&;CU were to pass them by. Once the charter was obtained, surveying began almost immediately, and construction started in early 1850, working southeast from Turner Junction (now West Chicago ) and reaching Batavia in late August 1850. After
384-866: A main line of CB&Q successor Burlington Northern Santa Fe Railway . This section of track makes up part of the Mendota Subdivision , which continues south-southwest to Galesburg. The original West Chicago-Aurora branch line is now an industrial track of the Chicago Subdivision . Mendota subdivision hosts about 40 freight trains a day, and Amtrak Southwest Chief #3 and 4, California Zephyr #5 and 6, Illinois Zephyr #383 and 380, and Carl Sandburg #381 and 382. It currently runs through Aurora, Montgomery, Bristol, Plano, Sandwich, Somonauk, Leland, Earlville, Meriden, Mendota, Clarion, Arlington, Zearing, Malden, Princeton, Wyanet, Buda, Neponset, Kewanee, Galva, Altona, Oneida, Wataga, and Galesburg. It interchanges with
448-433: A major celebration there, daily train service between Batavia and Chicago began on September 2, 1850. Construction to Aurora was completed on October 4, and the railroad company announced that beginning October 21, 1850, two round trips a day would be scheduled to Chicago and back. Customers paid $ 1.25 to travel from Aurora to Chicago, while the fare to Aurora from Chicago was $ 1.10. The trackage between Aurora and West Chicago
512-466: A massive 6,000-pound flywheel), and it had issues with overheating (even with the best metals of the day, its cylinder heads and liners would warp and melt in a matter of minutes), so it was therefore deemed impractical. Diesel engines of that era were obese, stationary monsters and were best suited for low-speed, continuous operation. It was not reliable for a railroad locomotive; there was no diesel engine suitable for that purpose then. Always innovating,
576-710: A subsequent public outcry and protest over the program's cancellation, the No. 4960 locomotive pulled the railroad's final excursion train on July 17. The railroad operated a number of streamlined passenger trains known as the Zephyrs which were one of the most famous and largest fleets of streamliners in the United States. The Burlington Zephyr , the first American diesel -electric powered streamlined passenger train, made its noted "dawn-to-dusk" run from Denver, Colorado , to Chicago, Illinois , on May 26, 1934. On November 11, 1934,
640-933: Is a stub . You can help Misplaced Pages by expanding it . Chicago, Burlington and Quincy Railroad The Chicago, Burlington and Quincy Railroad ( reporting mark CBQ ) was a railroad that operated in the Midwestern United States . Commonly referred to as the Burlington Route , the Burlington , CB&Q , or as the Q , it operated extensive trackage in the states of Colorado , Illinois , Iowa , Missouri , Nebraska , Wisconsin , Wyoming , and also in Texas through subsidiaries Colorado and Southern Railway , Fort Worth and Denver Railway , and Burlington-Rock Island Railroad . Its primary connections included Chicago , Minneapolis–Saint Paul , St. Louis , Kansas City , and Denver . Because of this extensive trackage in
704-592: Is still in service as an industrial spur, though the connection in West Chicago has been removed. Like many early railroads, the Aurora Branch at first was working on a thin financial margin. Any new railroad had to spend huge amounts on track construction, rolling stock, and maintenance facilities before it could even begin to make money, so people were often wary about investing in them. The Aurora Branch sold less than half of its original stock outlay of $ 100,000, which
SECTION 10
#1732855521779768-710: The Buffalo and Niagara Falls Railroad ; this matched the tracks built by the Galena and Chicago Union Railroad. It appears that the first locomotive used on the Aurora Branch was leased from the Galena and Chicago Union; called the Pioneer , it was a 4-2-0 wood-burning engine built by the Baldwin Locomotive Works. Late in 1850 the Aurora Branch purchased two engines second-hand: the Pigeon , another Baldwin 4-2-0 locomotive, bought from
832-560: The Galena and Chicago Union Railroad would bypass their towns in favor of West Chicago on its route; at the time, that was the only line running west from Chicago. The Aurora Branch was built from Aurora, through Batavia, to Turner Junction in what is now West Chicago. The line was built with old strap rail and minimal, if any, grading. Using a leased locomotive and cars, the Aurora Branch ran passenger and freight trains from Aurora to Chicago via its own line from Aurora to Turner Junction and one of
896-669: The Michigan Central Railroad , and the Whittlesey , a small locomotive with 4 driving wheels, purchased from the Buffalo and Niagara Falls Railroad. However, once construction was completed, profits were strong enough so that on July 8, 1851, the Aurora Branch increased its stock to $ 600,000, and on the one-year anniversary of the branch line’s completion, October 31, 1851, the company also paid dividends of 10 per cent—though in stock, not cash—to investors who had covered 75% or more of
960-776: The Mississippi River at both Burlington and Quincy, giving the railroad through connections with the Burlington and Missouri River Railroad (B&MR) in Iowa and the Hannibal & St. Joseph Railroad (H&StJ) in Missouri. In 1860 the H&;SJ carried the mail to the Pony Express upon reaching the Missouri River at St. Joseph, Missouri . In 1862 The first Railway Post Office was inaugurated on
1024-619: The Trailways Transportation System , and still provides intercity service to this day as Burlington Trailways . 1940 was the final year the CB&Q added steam locomotives to their roster, having completed construction on their O-5A class locomotives at the West Burlington, Iowa shops. With their freight traffic weighing 31 million tons that year, the CB&Q saw no further necessity for any more steam or diesel locomotives to be added to their roster. In 1942, following
1088-588: The Twin Cities , the Burlington Route formed a natural connection between Hill's home town (and headquarters) of St. Paul, Minnesota , and the railroad hub of Chicago. Moreover, Hill was willing to meet Perkins' $ 200-a-share asking price for the Burlington's stock. By 1900, Hill's Great Northern, in conjunction with the Northern Pacific Railway , held nearly 100 percent of Burlington's stock. By 1899,
1152-420: The U.S. Supreme Court . The only major strike in the line's history came in 1888, the Burlington railway strike of 1888 . Unlike most strikes, which were based on unskilled workers, this one was based on the highly skilled well-paid engineers and firemen, a challenge to management prerogatives. A settlement would have been much cheaper, but President Perkins was determined to assert ownership rights and destroy
1216-543: The ABRR's directors identified a different destination for their route, planning to connect Aurora with the Illinois Central Railroad ’s main line in the area of Mendota, which would reduce competition with the G&CU's line to Freeport. At that time, the Aurora Branch also signed a formal operating agreement with the Galena and Chicago Union to use their tracks into Chicago, beginning on January 1, 1852. The company
1280-458: The Aurora Branch, however, sometime during 1851 the G&CU asserted its priority right and declared that they would build a line east from Aurora. This prompted the Aurora Branch in mid-December 1851 to seek a lease in perpetuity to use the Galena and Chicago Union’s right of way, which was formally agreed to on January 13, 1852. With the new lease, the Aurora Branch had secured the right to build westwards, against other possible contenders. In turn,
1344-591: The Aurora Branch’s stockholders and the Board of Directors instructed company officers to explore arrangements “with the Galena and Chicago Union Rail Road Company, or any other company or companies, for the purpose of uniting or consolidating this company.” Newton speculates that the Aurora Branch sought this merger because, in the Galena and Chicago Union’s original 1836 charter, the Illinois legislature had given that company
SECTION 20
#17328555217791408-640: The Burlington Railroad must be included into a powerful transcontinental system. Though the railroad stretched as far west as Denver and Billings, Montana , it had failed to reach the Pacific Coast during the 1880s and 1890s, when construction was less expensive. Though approached by E. H. Harriman of the Union Pacific Railroad , Perkins felt his railroad was a more natural fit with James J. Hill 's Great Northern Railway . With its river line to
1472-624: The Burlington Route was able to enter the trade markets in 1862. From that year to date, the railroad and its successors have paid dividends continuously, and never run into debt or defaulted on a loan—the only Class I U.S. railroad for which this is true. After extensive trackwork was planned, the Aurora Branch changed its name to the Chicago and Aurora Railroad in June 1852, and to Chicago, Burlington, and Quincy Railroad in 1856, and shortly reached its two other namesake cities, Burlington, Iowa , and Quincy, Illinois . In 1868 CB&Q completed bridges over
1536-665: The Burlington by GN and NP, expansion continued. In 1908, the CB&Q purchased both the Colorado and Southern Railway and the Fort Worth and Denver Railway , giving it access south to Dallas and the Gulf of Mexico ports in Houston and Galveston . It also extended its reach south in the Mississippi Valley region by opening up a new line from Concord, Illinois , south to Paducah, Kentucky . It
1600-661: The Burlington included: The California Zephyr is still operated daily by Amtrak as trains Five (westbound) and Six (eastbound). Another Amtrak train, the Illinois Zephyr , is a modern descendant of the Kansas City Zephyr and the American Royal Zephyr services. Multiple locomotives from the Burlington have been preserved, including two Zephyr power units, thirty-five steam locomotives , and thirty-four diesel locomotives . Originally, 5632 (O-5B 4-8-4)
1664-544: The CB&Q created a subsidiary, the Burlington Transportation Company , to operate intercity buses in tandem with its railway network. On January 1, 1932, the CB&Q received a new president; former Great Northern Railroad president Ralph Budd . By which time, the CB&Q was facing a decline in passenger ridership from the Depression, and U.S. President Franklin D. Roosevelt was exploring ways to help
1728-749: The CB&Q merged with the Great Northern, Northern Pacific, and the Spokane, Portland and Seattle (SP&S) railroads on March 2, 1970, to form the Burlington Northern Railroad (BN), with Louis Menk serving as the company's first president and CEO (twenty-six years later, the BN and Santa Fe Railroads merged to become the Burlington Northern and Santa Fe Railway (BNSF)). Most passenger operations would be assumed in 1971 by Amtrak . Beginning in
1792-741: The CB&Q's commercial passenger operations was completed on September 26, 1952, when the last of the 4-6-2 locomotives that operated for the Chicago-Aurora suburban service were retired; the remaining steam locomotives on the CB&Q were primarily reassigned as freight haulers and yard switchers. The first division on the CB&Q to be fully dieselized was the Casper Division in Wyoming, where EMD GP7 road switchers were delivered in 1951. In 1955, regular performance on class 3 overhauls on steam locomotives were discontinued, and Harry C. Murphy opted for
1856-408: The CB&Q's new steam excursion program, only two of which remained operational by 1961: 2-8-2 No. 4960 and 4-8-4 No. 5632. In 1962, the CB&Q's passenger department began sponsoring the excursion runs by offering ticket discounts to paying customers, and the Burlington began to host several school trains for school students. In 1964, steam excursion operations on the railroad had dwindled, in
1920-505: The CB&Q, completed in 1922. Burlington's rapid expansion after the American Civil War was based upon sound financial management, dominated by John Murray Forbes of Boston and assisted by Charles Elliott Perkins . Perkins was a powerful administrator who eventually forged a system out of previously loosely held affiliates, virtually tripling Burlington's size during his presidency from 1881 to 1901. Ultimately, Perkins believed
1984-427: The G&CU's two tracks east from there to Chicago. The G&CU required the Aurora Branch to turn over 70 percent of their revenue per ton-mile handled on that railroad; as a result, in the mid-1850s, surveys were ordered to determine the best route for a railroad line to Chicago. The line from Aurora to Chicago was built through the fledgling towns of Naperville , Lisle , Downers Grove , Hinsdale , Berwyn , and
Zephyr Rocket - Misplaced Pages Continue
2048-457: The H&StJ to sort mail on the trains way across Missouri. The B&MR continued building west into Nebraska as a separate company, the Burlington & Missouri River Rail Road , founded in 1869. During the summer of 1870 it reached Lincoln , the newly designated capital of Nebraska and by 1872 it reached Kearney, Nebraska . That same year the B&;MR across Iowa was absorbed by the CB&Q. By
2112-834: The Illinois Railway La Salle Line in Zearing, the Union Pacific Troy Grove Sub in Earlville, and the Illinois Railway Ottawa Line in Montgomery, all in Illinois. The original Chicago-Aurora line, the oldest commuter rail line in the Chicago area, still exists today as Metra 's BNSF Railway Line , operated by the BNSF Railway , which is the successor of the CB&Q through numerous mergers. In 2017,
2176-461: The United States' entrance into World War II , the railroad's freight traffic increased to 49 million tons, with Ralph Budd (now named President Roosevelt's federal transportation commissioner) poised to ensure his company would help the war effort. In 1943, the War Production Board authorized EMC (now reincorporated as EMD) to construct sixteen FT locomotives for delivery to the CB&Q
2240-615: The company had rostered 1,205 locomotives, 936 passenger cars and 40,720 freight cars. In 1901, a rebuffed Harriman tried to gain an indirect influence over the Burlington by launching a stock raid on the Northern Pacific. Though Hill managed to fend off this attack on his nascent system, it led to the creation of the Northern Securities Company , and later, the Northern Securities Co. v. United States ruling by
2304-688: The cost of their initial stock purchases. But before they had actually raised money to purchase equipment, in March of 1850 the Aurora Branch’s board was already looking farther afield, resolving “that it is the desire of the directors of this company to extend the Aurora Branch Railroad to the most feasible point on the Illinois River , as soon as possible." Although they made arrangements to survey this route, nothing came of it immediately—other corporate maneuvers had to happen first. In February 1851,
2368-507: The following year, by which time, the road's freight traffic peaked 57 million tons. After World War II ended, the CB&Q began ordering additional diesel locomotives from EMD, as part of a $ 140-million program to dieselize their roster. August 31, 1949, was Ralph Budd's final day as president of the railroad before he would retire during that year's Chicago Railroad Fair , and Harry C. Murphy succeeded him in September. Dieselisation of
2432-643: The former Burlington-Rock Island Railroad ). In 1970, it merged with the Northern Pacific Railway and the Great Northern Railway to form the Burlington Northern Railroad . The earliest predecessor of the Chicago, Burlington and Quincy, the Aurora Branch Railroad , was chartered by act of the Illinois General Assembly on October 2, 1848. The charter was obtained by citizens of Aurora and Batavia, Illinois , who were concerned that
2496-534: The last commercial steam assignment for the railroad at Herrin Junction on January 27, 1959 (the only major U.S. railroads to operate revenue steam after this date were Union Pacific, Illinois Central , Nickel Plate Road , Norfolk and Western , Grand Trunk Western , Duluth, Missabe and Iron Range , and Lake Superior and Ishpeming ). CB&Q subsidiary Colorado and Southern eventually ended their commercial steam operations on October 11, 1962, when 2-8-0 No. 641 pulled
2560-476: The midwest and mountain states, the railroad used the advertising slogans "Everywhere West", "Way of the Zephyrs ", and "The Way West". In 1967, it reported 19,565 million net ton-miles of revenue freight and 723 million passenger miles; corresponding totals for C&S were 1,100 and 10 and for FW&D were 1,466 and 13. At the end of the year, CB&Q operated 8,538 route-miles, C&S operated 708, and FW&D operated 1,362 (these totals may or may not include
2624-465: The rail industry improve. Ralph Budd subsequently asked for a streamlined stainless-steel train to be built, and this resulted in the railroad introducing the famous Zephyrs . As early as 1897, the railroad invested in alternatives to steam power, namely, internal-combustion engines. The railroad's shops in Aurora had built a three-horsepower distillate motor in that year, but it was not reliable (requiring
Zephyr Rocket - Misplaced Pages Continue
2688-497: The railroad purchased "doodlebug" gas-electric combine cars from Electro-Motive Corporation (EMC) and built their own, sending them out to do the jobs of a steam locomotive and a single car. After the positive results the doodlebug cars created, and after having purchased and used three General Electric steeple-cab switchers powered by distillate engines, Ralph Budd requested the Winton Engine Company to design and construct
2752-566: The railroad's remaining steam fleet to use up their previously-restored mileage throughout the next year. By which time, the majority of the Burlington's steam fleet were relegated to operate east of Lincoln, Nebraska, with only two steam locomotives held for back-up service west of Lincoln. The final division on the CB&Q to be fully dieselized was the Beardstown Division in Southern Illinois, where 2-8-2 locomotive No. 4997 worked
2816-399: The right to build “lateral routes” from its main line; an extension of the Aurora Branch westward could be built only by the Galena and Chicago Union. However, Newton also points out that consolidation wouldn’t do much for the G&CU financially, basically just giving them a parallel route not very far from the one they were already building—so no consolidation took place. Perhaps to help
2880-407: The road's freight operations. Passenger service was markedly reduced, as people had shifted to using private automobiles for transportation. In late 1966, Louis Menk became president of the Northern Pacific, leaving William John Quinn in charge of the CB&Q. As the financial situation of American railroading continued to decline throughout the 1960s, forcing restructuring across the country,
2944-490: The summer of 1955, the CB&Q hosted a series of occasional steam excursion trains per request of railfan clubs, such as the Illinois Railroad Club. Harry C. Murphy was a steam fan who recognized the popularity in steam locomotives, and he authorized additional steam excursion trains to take place on the railroad throughout the late 1950s and early 1960s. Twenty-one steam locomotives of varying classes took part in
3008-908: The system grew. By the early 1900s, the shops at Aurora served the Chicago Division, the shops in Galesburg, Illinois served the Galesburg Division, the shops in Hannibal, Missouri served the St. Louis Division, the shops in West Burlington, Iowa and in Creston, Iowa served the Iowa Division, and the shops in Denver, Colorado served the McCook and Red Cloud Divisions. The latter were the final steam era shops built for
3072-584: The time the Missouri River bridge at Plattsmouth, Nebraska , was completed the B&MR in Nebraska was well on its way to Denver . That same year, the Nebraska B&MR was purchased by the CB&Q, which completed the line to Denver by 1882. Early repair shops for rolling stock were built by the Aurora Branch Railroad in Chicago, but the first true shop site was established at Aurora, Illinois in 1855. These were capable of repairing and building locomotives, freight cars, and passenger cars. Other shop sites were established or inherited from predecessor lines as
3136-435: The train between St. Louis and Burlington, while the Chicago, Rock Island and Pacific carried it between Burlington and Minneapolis/St. Paul. Motive power and equipment were pooled and traveled the entire distance without change. The trains, with coaches and sleeping cars, started operating on January 7, 1941. They also carried round-end observation cars with the train's name emblazoned on the rear for several years. The train
3200-486: The train was put into regularly scheduled service between Lincoln, Nebraska , and Kansas City, Missouri . Although the distinctive, articulated stainless steel trains were well known, and the railroad adopted the "Way of the Zephyrs " advertising slogan, they did not attract passengers back to the rails en masse , and the last one was retired from revenue service with the advent of Amtrak . The Zephyr fleet included: Other named passenger trains which operated on
3264-404: The union threat. The fight dragged on 10 months before the financially and emotionally exhausted strikers finally gave up, and Perkins declared a total victory. However, he had spent heavily on strikebreakers, lawsuits, and police protection, hurting the balance sheets and putting the railroad in a poor position to face the nationwide depression of the Panic of 1893 . Following the purchase of
SECTION 50
#17328555217793328-421: The very end. Actually, I wasn't taking a gamble at all." The manifestation of this gamble was the eight-cylinder Winton 8-201A engine that powered the Burlington Zephyr (built 1934) on its record-breaking run, and it opened the door for developing the long line of diesel engines that has powered Electro-Motive locomotives for the next seventy years. In 1936, the CB&Q would become one of the founding members of
3392-421: The wake of rising operation and maintenance costs and a loss of experienced steam locomotive mechanics; the only factors that kept the CB&Q's steam program going were public demand and Harry Murphy's passion for steam. In the process of reducing operating costs for the railroad, Harry Murphy's successor, Louis Menk, ordered for the CB&Q's steam excursion program to be shut down by August 1, 1966. Despite
3456-438: The west side of Chicago. It was opened in 1864, and passenger and freight service began. Regular commuter train service started in 1864 and remains operational to this day, making it the oldest surviving regular passenger service in Chicago. Both the original Chicago line, and to a much lesser extent, the old Aurora Branch right of way, are still in regular use today by the Burlington's present successor BNSF Railway . The company
3520-653: Was discontinued, with the last trains departing on April 8 and arriving at their respective end points the following morning. Reinstatement of direct passenger rail service between the Twin Cities and St. Louis is infeasible on the original route, as a key part of it, between Burlington and Cedar Rapids, was abandoned when the Rock Island ceased operations in 1980. Portions of this section have been converted to bicycle/hiking trails . Although service could be run on an alternative routing (e.g. via Twin Star Rocket route; or by combining Zephyr Rocket and Twin Star Rocket routes). This United States rail–related article
3584-434: Was during this period that the Burlington was at its largest, exceeding just over 12,000 route miles in 14 states by the 1920s. With the First World War having the same effect on the railroad as on all other railroads, during the 1920s, the Burlington Route had an increasingly heavy amount of equipment flooding the yards. With the advent of the Great Depression , the CB&Q held a good portion of this for scrap. In 1929,
3648-425: Was enough to pay for surveying and grading the route. But to purchase track, locomotives, and cars, in March of 1850 the board offered bonds for sale worth $ 45,000 in total, with the directors personally providing guarantees of payment if necessary. The company economized by using both second-hand tracks and locomotives. In construction, they used wooden rails covered with strap iron which they had purchased used from
3712-400: Was named by combining the nicknames of the operating railroads' passenger train fleets: The passenger trains of the Burlington Route were called Zephyrs , while those of the Rock Island Lines were called Rockets , hence Zephyr Rocket . In 1964 the train was still earning money above its direct costs, at least for the Chicago, Burlington & Quincy. In 1967 the train, by then coaches-only,
3776-452: Was never acted upon, and was repealed by an act of February 14, 1855, which instead changed the name to Chicago, Burlington and Quincy Railroad (CB&Q). The Aurora-Chicago line was opened on May 20, 1864, by which time the CB&Q had, through acquisitions, acquired a main line from Chicago to Galesburg , where it split into branches for Burlington and Quincy . The portion of the Chicago and Aurora between Aurora and Mendota remains
3840-427: Was never acted upon, and was repealed by an act of February 14, 1855, which instead reorganized the line as the Chicago, Burlington and Quincy Railroad. The new railroad was formed by the consolidation of the Chicago and Aurora Railroad, the Central Military Tract, the west end of the Peoria & Oquawka, and the Northern Cross Railroad companies. With a steady acquisition of locomotives, cars, equipment, and trackage,
3904-423: Was preserved, but later scrapped. The Burlington was a leader in innovation; among its firsts were use of the printing telegraph (1910), train radio communications (1915), streamlined passenger diesel power (1934) and vista-dome coaches (1945). In 1927, the railroad was one of the first to use Centralized Traffic Control (CTC) and by the end of 1957 had equipped 1,500 miles (2,400 km) of its line. It played
SECTION 60
#17328555217793968-407: Was renamed Chicago and Aurora Railroad on June 22, 1852, and given expanded powers to extend from Aurora to a point north of LaSalle ; this extension, to Mendota, was completed on October 20, 1853. Another amendment, passed February 28, 1854, authorized the company to build east from Aurora to Chicago via Naperville , and changed its name to Chicago and Southwestern Railroad. The latter provision
4032-406: Was renamed Chicago and Aurora Railroad on June 22, 1852, and given expanded powers to extend from Aurora to a point north of LaSalle ; this extension, to Mendota, was completed on October 20, 1853. Another amendment, passed February 28, 1854, authorized the company to build east from Aurora to Chicago via Naperville , and changed its name to Chicago and Southwestern Railroad. The latter provision
4096-402: Was the Aurora Branch Railroad (ABRR), which was chartered by the Illinois General Assembly on February 12, 1849, to build a line from the Galena and Chicago Union Railroad (G&CU) to Aurora. According to railroad historian A. W. Newton, “The Galena and Chicago Union Railroad was then under construction, passing some twelve miles to the north, and agitation started for the construction of
#778221