Misplaced Pages

#747252

78-598: The river only flows above the surface of its sandy bed a few days each year, but even during much of the dry season its subterranean water surfaces as pools in places, and provides an important resource for species in the Damaraland region of northern Namibia . The Ugab's mean run-off is roughly 20 million cubic metres per annum, while its catchment area (including its tributaries) is estimated to be between 24,800 and 29,355 square kilometres (11,334 sq mi). The Ugab River's large subterranean water content makes it

156-411: A calcium aluminate cement or with Portland cement to form Portland cement concrete (named for its visual resemblance to Portland stone ). Many other non-cementitious types of concrete exist with other methods of binding aggregate together, including asphalt concrete with a bitumen binder, which is frequently used for road surfaces , and polymer concretes that use polymers as a binder. Concrete

234-459: A major Namibian river . Stretched out for 450 kilometres (280 mi), the river provides water for species such as the rare desert elephant , as well as giraffe , mountain zebra and the largest population of free-roaming black rhinoceroses in the world. The Ugab Wilderness Area was established here to protect the future of these rare animals. Important tourism destinations are the Brandberg ,

312-433: A French structural and civil engineer . Concrete components or structures are compressed by tendon cables during, or after, their fabrication in order to strengthen them against tensile forces developing when put in service. Freyssinet patented the technique on 2 October 1928. Concrete is an artificial composite material , comprising a matrix of cementitious binder (typically Portland cement paste or asphalt ) and

390-452: A cementitious material forms a cement paste by the process of hydration. The cement paste glues the aggregate together, fills voids within it, and makes it flow more freely. As stated by Abrams' law , a lower water-to-cement ratio yields a stronger, more durable concrete, whereas more water gives a freer-flowing concrete with a higher slump . The hydration of cement involves many concurrent reactions. The process involves polymerization ,

468-400: A concrete component—and become a part of the binder for the aggregate. Fly ash and slag can enhance some properties of concrete such as fresh properties and durability. Alternatively, other materials can also be used as a concrete binder: the most prevalent substitute is asphalt , which is used as the binder in asphalt concrete . Admixtures are added to modify the cure rate or properties of

546-434: A diameter of between 0.074 and 4.75 millimeters. By another definition, in terms of particle size as used by geologists , sand particles range in diameter from 0.0625 mm (or 1 ⁄ 16  mm) a volume of approximately 0.00012 cubic millimetres, to 2 mm, a volume of approximately 4.2 cubic millimetres, the difference in volumes being 34,688 measures difference. Any particle falling within this range of sizes

624-434: A dispersed phase or "filler" of aggregate (typically a rocky material, loose stones, and sand). The binder "glues" the filler together to form a synthetic conglomerate . Many types of concrete are available, determined by the formulations of binders and the types of aggregate used to suit the application of the engineered material. These variables determine strength and density, as well as chemical and thermal resistance of

702-434: A documentary called " Sand Wars " about the impact of the lack of construction sand. It shows the ecological and economic effects of both legal and illegal trade in construction sand. To retrieve the sand, the method of hydraulic dredging is used. This works by pumping the top few meters of sand out of the water and filling it into a boat, which is then transported back to land for processing. All marine life mixed in with

780-452: A greater degree of fracture resistance even in seismically active environments. Roman concrete is significantly more resistant to erosion by seawater than modern concrete; it used pyroclastic materials which react with seawater to form Al- tobermorite crystals over time. The use of hot mixing and the presence of lime clasts are thought to give the concrete a self-healing ability, where cracks that form become filled with calcite that prevents

858-429: A hard matrix that binds the materials together into a durable stone-like material that has many uses. This time allows concrete to not only be cast in forms, but also to have a variety of tooled processes performed. The hydration process is exothermic , which means ambient temperature plays a significant role in how long it takes concrete to set. Often, additives (such as pozzolans or superplasticizers ) are included in

SECTION 10

#1732855415748

936-603: A high olivine content. Many sands, especially those found extensively in Southern Europe , have iron impurities within the quartz crystals of the sand, giving a deep yellow color. Sand deposits in some areas contain garnets and other resistant minerals, including some small gemstones . Rocks erode or weather over a long period of time, mainly by water and wind, and their sediments are transported downstream. These sediments continue to break apart into smaller pieces until they become fine grains of sand. The type of rock

1014-415: A large aggregate that is too large for the size of the formwork, or which has too few smaller aggregate grades to serve to fill the gaps between the larger grades, or using too little or too much sand for the same reason, or using too little water, or too much cement, or even using jagged crushed stone instead of smoother round aggregate such as pebbles. Any combination of these factors and others may result in

1092-461: A large type of industrial facility called a concrete plant , or often a batch plant. The usual method of placement is casting in formwork , which holds the mix in shape until it has set enough to hold its shape unaided. Concrete plants come in two main types, ready-mix plants and central mix plants. A ready-mix plant blends all of the solid ingredients, while a central mix does the same but adds water. A central-mix plant offers more precise control of

1170-469: A mixture of calcium silicates ( alite , belite ), aluminates and ferrites —compounds, which will react with water. Portland cement and similar materials are made by heating limestone (a source of calcium) with clay or shale (a source of silicon, aluminium and iron) and grinding this product (called clinker ) with a source of sulfate (most commonly gypsum ). Cement kilns are extremely large, complex, and inherently dusty industrial installations. Of

1248-405: A number of manufactured aggregates, including air-cooled blast furnace slag and bottom ash are also permitted. The size distribution of the aggregate determines how much binder is required. Aggregate with a very even size distribution has the biggest gaps whereas adding aggregate with smaller particles tends to fill these gaps. The binder must fill the gaps between the aggregate as well as paste

1326-489: A result. People sometimes dig holes in the sand at beaches for recreational purposes, but if too deep they can result in serious injury or death in the event of a collapse. Manufactured sand (M sand) is sand made from rock by artificial processes, usually for construction purposes in cement or concrete. It differs from river sand by being more angular, and has somewhat different properties. In Dubai , United Arab Emirates , sand needed to construct infrastructure and create

1404-424: A semi-liquid slurry (paste) that can be shaped, typically by pouring it into a form. The concrete solidifies and hardens through a chemical process called hydration . The water reacts with the cement, which bonds the other components together, creating a robust, stone-like material. Other cementitious materials, such as fly ash and slag cement , are sometimes added—either pre-blended with the cement or directly as

1482-483: A significant dredging industry, raising environmental concerns over fish depletion, landslides, and flooding. Countries such as China, Indonesia, Malaysia, and Cambodia ban sand exports, citing these issues as a major factor. It is estimated that the annual consumption of sand and gravel is 40 billion tons and sand is a US$ 70 billion global industry. With increasing use, more is expected to come from recycling and alternatives to sand. The global demand for sand in 2017

1560-493: A simple, fast way of getting a basic idea of the properties of the finished concrete without having to perform testing in advance. Various governing bodies (such as British Standards ) define nominal mix ratios into a number of grades, usually ranging from lower compressive strength to higher compressive strength. The grades usually indicate the 28-day cure strength. Thorough mixing is essential to produce uniform, high-quality concrete. Separate paste mixing has shown that

1638-429: A soil containing more than 85 percent sand-sized particles by mass. The composition of sand varies, depending on the local rock sources and conditions, but the most common constituent of sand in inland continental settings and non- tropical coastal settings is silica (silicon dioxide, or SiO 2 ), usually in the form of quartz . Calcium carbonate is the second most common type of sand. One such example of this

SECTION 20

#1732855415748

1716-525: Is aragonite , which has been created over the past 500   million years by various forms of life, such as coral and shellfish . It is the primary form of sand apparent in areas where reefs have dominated the ecosystem for millions of years, as in the Caribbean . Somewhat more rarely, sand may be composed of calcium sulfate , such as gypsum and selenite , as is found in places such as White Sands National Park and Salt Plains National Wildlife Refuge in

1794-508: Is called grus in geology or sharp sand in the building trade where it is preferred for concrete, and in gardening where it is used as a soil amendment to loosen clay soils. Sand that is transported long distances by water or wind will be rounded, with characteristic abrasion patterns on the grain surface. Desert sand is typically rounded. People who collect sand as a hobby are known as arenophiles . Organisms that thrive in sandy environments are psammophiles. Only some sands are suitable for

1872-511: Is distinct from mortar . Whereas concrete is itself a building material, mortar is a bonding agent that typically holds bricks , tiles and other masonry units together. Grout is another material associated with concrete and cement. It does not contain coarse aggregates and is usually either pourable or thixotropic , and is used to fill gaps between masonry components or coarse aggregate which has already been put in place. Some methods of concrete manufacture and repair involve pumping grout into

1950-433: Is termed a sand grain . Sand grains are between gravel (with particles ranging from 2 mm up to 64 mm by the latter system, and from 4.75 mm up to 75 mm in the former) and silt (particles smaller than 0.0625 mm down to 0.004 mm). The size specification between sand and gravel has remained constant for more than a century, but particle diameters as small as 0.02 mm were considered sand under

2028-474: Is the most common mineral resistant to weathering . The composition of mineral sand is highly variable, depending on the local rock sources and conditions. The bright white sands found in tropical and subtropical coastal settings are eroded limestone and may contain coral and shell fragments in addition to other organic or organically derived fragmental material, suggesting that sand formation depends on living organisms, too. The gypsum sand dunes of

2106-476: Is the second-most-used substance in the world after water , and is the most widely used building material. Its usage worldwide, ton for ton, is twice that of steel, wood, plastics, and aluminium combined. When aggregate is mixed with dry Portland cement and water , the mixture forms a fluid slurry that is easily poured and molded into shape. The cement reacts with the water through a process called concrete hydration that hardens it over several hours to form

2184-559: Is then blended with aggregates and any remaining batch water and final mixing is completed in conventional concrete mixing equipment. Workability is the ability of a fresh (plastic) concrete mix to fill the form/mold properly with the desired work (pouring, pumping, spreading, tamping, vibration) and without reducing the concrete's quality. Workability depends on water content, aggregate (shape and size distribution), cementitious content and age (level of hydration ) and can be modified by adding chemical admixtures, like superplasticizer. Raising

2262-399: Is usually reinforced with materials that are strong in tension, typically steel rebar . The mix design depends on the type of structure being built, how the concrete is mixed and delivered, and how it is placed to form the structure. Portland cement is the most common type of cement in general usage. It is a basic ingredient of concrete, mortar , and many plasters . It consists of

2340-705: The Albert Atterberg standard in use during the early 20th century. The grains of sand in Archimedes ' The Sand Reckoner written around 240 BCE, were 0.02 mm in diameter. A 1938 specification of the United States Department of Agriculture was 0.05 mm. A 1953 engineering standard published by the American Association of State Highway and Transportation Officials set the minimum sand size at 0.074 mm. Sand feels gritty when rubbed between

2418-515: The Doros Crater and the Vingerklip . Towns and settlements in its catchment area are Outjo , Otjiwarongo , Kalkfeld , Omatjette and Uis . It is possible to drive or trek the length of the sandy river, passing local Herero farmers and the pink granite inselbergs (isolated rocky hills left behind after volcanic activity) dotted throughout the region. These bizarre stones have been shaped over

Ugab River - Misplaced Pages Continue

2496-454: The Dubai Islands exceeds local supplies, requiring sand from Australia . The artificial islands required more than 835 million tonnes of sand, at a cost greater than $ 26 billion USD. [REDACTED] Earth Sciences portal Concrete Concrete is a composite material composed of aggregate bonded together with a fluid cement that cures to a solid over time. Concrete

2574-509: The Krumbein phi scale , where size is Φ = -log 2 D; D being the particle size in mm. On this scale, for sand the value of Φ varies from −1 to +4, with the divisions between sub-categories at whole numbers. The most common constituent of sand, in inland continental settings and non-tropical coastal settings, is silica (silicon dioxide, or SiO 2 ), usually in the form of quartz , which, because of its chemical inertness and considerable hardness,

2652-670: The White Sands National Park in New Mexico are famous for their bright, white color. Arkose is a sand or sandstone with considerable feldspar content, derived from weathering and erosion of a (usually nearby) granitic rock outcrop. Some sands contain magnetite , chlorite , glauconite , or gypsum . Sands rich in magnetite are dark to black in color, as are sands derived from volcanic basalts and obsidian . Chlorite - glauconite bearing sands are typically green in color, as are sands derived from basaltic lava with

2730-480: The construction industry , whose demand is ever growing with greater impacts on raw material extraction, waste generation and landfill practices. Concrete production is the process of mixing together the various ingredients—water, aggregate, cement, and any additives—to produce concrete. Concrete production is time-sensitive. Once the ingredients are mixed, workers must put the concrete in place before it hardens. In modern usage, most concrete production takes place in

2808-483: The Sahara is sand dunes, while 70% is bare rock. The wind is responsible for creating these different environments and shaping the sand to be round and smooth. These properties make desert sand unusable for construction. Beach sand is also formed by erosion. Over thousands of years, rocks are eroded near the shoreline from the constant motion of waves and the sediments build up. Weathering and river deposition also accelerate

2886-473: The U.S. Sand is a non-renewable resource over human timescales, and sand suitable for making concrete is in high demand. Desert sand, although plentiful, is not suitable for concrete. Fifty billion tons of beach sand and fossil sand are used each year for construction. The exact definition of sand varies. The scientific Unified Soil Classification System used in engineering and geology corresponds to US Standard Sieves, and defines sand as particles with

2964-639: The absence of reinforcement, its tensile strength was far lower than modern reinforced concrete , and its mode of application also differed: Modern structural concrete differs from Roman concrete in two important details. First, its mix consistency is fluid and homogeneous, allowing it to be poured into forms rather than requiring hand-layering together with the placement of aggregate, which, in Roman practice, often consisted of rubble . Second, integral reinforcing steel gives modern concrete assemblies great strength in tension, whereas Roman concrete could depend only upon

3042-610: The cisterns secret as these enabled the Nabataeans to thrive in the desert. Some of these structures survive to this day. In the Ancient Egyptian and later Roman eras, builders discovered that adding volcanic ash to lime allowed the mix to set underwater. They discovered the pozzolanic reaction . The Romans used concrete extensively from 300 BC to AD 476. During the Roman Empire, Roman concrete (or opus caementicium )

3120-526: The concrete at the time of batching/mixing. (See § Production below.) The common types of admixtures are as follows: Inorganic materials that have pozzolanic or latent hydraulic properties, these very fine-grained materials are added to the concrete mix to improve the properties of concrete (mineral admixtures), or as a replacement for Portland cement (blended cements). Products which incorporate limestone , fly ash , blast furnace slag , and other useful materials with pozzolanic properties into

3198-399: The concrete can cause the initially placed material to begin to set before the next batch is added on top. This creates a horizontal plane of weakness called a cold joint between the two batches. Once the mix is where it should be, the curing process must be controlled to ensure that the concrete attains the desired attributes. During concrete preparation, various technical details may affect

Ugab River - Misplaced Pages Continue

3276-461: The concrete quality. Central mix plants must be close to the work site where the concrete will be used, since hydration begins at the plant. A concrete plant consists of large hoppers for storage of various ingredients like cement, storage for bulk ingredients like aggregate and water, mechanisms for the addition of various additives and amendments, machinery to accurately weigh, move, and mix some or all of those ingredients, and facilities to dispense

3354-441: The construction industry, for example for making concrete . Grains of desert sand are rounded by being blown in the wind, and for this reason do not produce solid concrete, unlike the rough sand from the sea. Because of the growth of population and of cities and the consequent construction activity there is a huge demand for these special kinds of sand, and natural sources are running low. In 2012 French director Denis Delestrac made

3432-519: The crack from spreading. The widespread use of concrete in many Roman structures ensured that many survive to the present day. The Baths of Caracalla in Rome are just one example. Many Roman aqueducts and bridges, such as the magnificent Pont du Gard in southern France, have masonry cladding on a concrete core, as does the dome of the Pantheon . After the Roman Empire, the use of burned lime and pozzolana

3510-438: The extracted sand is killed and the ecosystem can continue to suffer for years after the mining is complete. Not only does this affect marine life, but also the local fishing industries because of the loss of life, and communities living close to the water's edge. When sand is taken out of the water it increases the risk of landslides, which can lead to loss of agricultural land and/or damage to dwellings. Sand's many uses require

3588-653: The fingers. Silt , by comparison, feels like flour . ISO 14688 grades sands as fine, medium, and coarse with ranges 0.063 mm to 0.2 mm to 0.63 mm to 2.0 mm. In the United States, sand is commonly divided into five sub-categories based on size: very fine sand ( 1 ⁄ 16 – 1 ⁄ 8  mm diameter), fine sand ( 1 ⁄ 8  mm – 1 ⁄ 4  mm), medium sand ( 1 ⁄ 4  mm – 1 ⁄ 2  mm), coarse sand ( 1 ⁄ 2  mm – 1 mm), and very coarse sand (1 mm – 2 mm). These sizes are based on

3666-431: The finished product. Construction aggregates consist of large chunks of material in a concrete mix, generally a coarse gravel or crushed rocks such as limestone , or granite , along with finer materials such as sand . Cement paste, most commonly made of Portland cement , is the most prevalent kind of concrete binder. For cementitious binders, water is mixed with the dry cement powder and aggregate, which produces

3744-669: The gaps to make up a solid mass in situ . The word concrete comes from the Latin word " concretus " (meaning compact or condensed), the perfect passive participle of " concrescere ", from " con -" (together) and " crescere " (to grow). Concrete floors were found in the royal palace of Tiryns , Greece, which dates roughly to 1400 to 1200 BC. Lime mortars were used in Greece, such as in Crete and Cyprus, in 800 BC. The Assyrian Jerwan Aqueduct (688 BC) made use of waterproof concrete . Concrete

3822-554: The interlinking of the silicates and aluminate components as well as their bonding to sand and gravel particles to form a solid mass. One illustrative conversion is the hydration of tricalcium silicate: The hydration (curing) of cement is irreversible. Fine and coarse aggregates make up the bulk of a concrete mixture. Sand , natural gravel, and crushed stone are used mainly for this purpose. Recycled aggregates (from construction, demolition, and excavation waste) are increasingly used as partial replacements for natural aggregates, while

3900-406: The making of mortar. In an English translation from 1397, it reads "lyme ... is a stone brent; by medlynge thereof with sonde and water sement is made". From the 14th century, the quality of mortar was again excellent, but only from the 17th century was pozzolana commonly added. The Canal du Midi was built using concrete in 1670. Perhaps the greatest step forward in the modern use of concrete

3978-531: The material. Mineral admixtures use recycled materials as concrete ingredients. Conspicuous materials include fly ash , a by-product of coal-fired power plants ; ground granulated blast furnace slag , a by-product of steelmaking ; and silica fume , a by-product of industrial electric arc furnaces . Structures employing Portland cement concrete usually include steel reinforcement because this type of concrete can be formulated with high compressive strength , but always has lower tensile strength . Therefore, it

SECTION 50

#1732855415748

4056-419: The mix, are being tested and used. These developments are ever growing in relevance to minimize the impacts caused by cement use, notorious for being one of the largest producers (at about 5 to 10%) of global greenhouse gas emissions . The use of alternative materials also is capable of lowering costs, improving concrete properties, and recycling wastes, the latest being relevant for circular economy aspects of

4134-478: The mixed concrete, often to a concrete mixer truck. Modern concrete is usually prepared as a viscous fluid, so that it may be poured into forms. The forms are containers that define the desired shape. Concrete formwork can be prepared in several ways, such as slip forming and steel plate construction . Alternatively, concrete can be mixed into dryer, non-fluid forms and used in factory settings to manufacture precast concrete products. Interruption in pouring

4212-441: The mixing of cement and water into a paste before combining these materials with aggregates can increase the compressive strength of the resulting concrete. The paste is generally mixed in a high-speed , shear-type mixer at a w/c (water to cement ratio) of 0.30 to 0.45 by mass. The cement paste premix may include admixtures such as accelerators or retarders, superplasticizers , pigments , or silica fume . The premixed paste

4290-441: The mixture to improve the physical properties of the wet mix, delay or accelerate the curing time, or otherwise change the finished material. Most concrete is poured with reinforcing materials (such as steel rebar ) embedded to provide tensile strength , yielding reinforced concrete . In the past, lime -based cement binders, such as lime putty, were often used but sometimes with other hydraulic cements , (water resistant) such as

4368-437: The process of creating a beach, along with marine animals interacting with rocks, such as eating the algae off of them. Once there is a sufficient amount of sand, the beach acts as a barrier to keep the land from eroding any further. This sand is ideal for construction as it is angular and of various sizes. Marine sand (or ocean sand) comes from sediments transported into the ocean and the erosion of ocean rocks. The thickness of

4446-506: The properties or increase the performance envelope of the mix. Design-mix concrete can have very broad specifications that cannot be met with more basic nominal mixes, but the involvement of the engineer often increases the cost of the concrete mix. Concrete mixes are primarily divided into nominal mix, standard mix and design mix. Nominal mix ratios are given in volume of Cement : Sand : Aggregate {\displaystyle {\text{Cement : Sand : Aggregate}}} . Nominal mixes are

4524-468: The quality and nature of the product. Design mix ratios are decided by an engineer after analyzing the properties of the specific ingredients being used. Instead of using a 'nominal mix' of 1 part cement, 2 parts sand, and 4 parts aggregate (the second example from above), a civil engineer will custom-design a concrete mix to exactly meet the requirements of the site and conditions, setting material ratios and often designing an admixture package to fine-tune

4602-461: The rate the sand can replenish, making it a non-renewable resource. Sand dunes are a consequence of dry conditions or wind deposition. The Sahara Desert is very dry because of its geographic location and proximity to the equator . It is known for its vast sand dunes, which exist mainly due to a lack of vegetation and water. Over time, wind blows away fine particles, such as clay and dead organic matter, leaving only sand and larger rocks. Only 15% of

4680-460: The sand because they do not have as much time to dissolve away. The term for sand formed by weathering is "epiclastic." Sand from rivers are collected either from the river itself or its flood plain and accounts for the majority of the sand used in the construction industry. Because of this, many small rivers have been depleted, causing environmental concern and economic losses to adjacent land. The rate of sand mining in such areas greatly outweighs

4758-480: The sand layer varies, however it is common to have more sand closer to land; this type of sand is ideal for construction and is a very valuable commodity. Europe is the main miners of marine sand, which greatly hurts ecosystems and local fisheries. The study of individual grains can reveal much historical information as to the origin and kind of transport of the grain. Quartz sand that is recently weathered from granite or gneiss quartz crystals will be angular. It

SECTION 60

#1732855415748

4836-411: The sediment originated from and the intensity of the environment give different compositions of sand. The most common rock to form sand is granite , where the feldspar minerals dissolve faster than the quartz , causing the rock to break apart into small pieces. In high energy environments rocks break apart much faster than in more calm settings. In granite rocks this results in more feldspar minerals in

4914-411: The strength of the concrete bonding to resist tension. The long-term durability of Roman concrete structures has been found to be due to its use of pyroclastic (volcanic) rock and ash, whereby the crystallization of strätlingite (a specific and complex calcium aluminosilicate hydrate) and the coalescence of this and similar calcium–aluminium-silicate–hydrate cementing binders helped give the concrete

4992-497: The surface of concrete for a decorative "exposed aggregate" finish, popular among landscape designers. Admixtures are materials in the form of powder or fluids that are added to the concrete to give it certain characteristics not obtainable with plain concrete mixes. Admixtures are defined as additions "made as the concrete mix is being prepared". The most common admixtures are retarders and accelerators. In normal use, admixture dosages are less than 5% by mass of cement and are added to

5070-535: The surfaces of the aggregate together, and is typically the most expensive component. Thus, variation in sizes of the aggregate reduces the cost of concrete. The aggregate is nearly always stronger than the binder, so its use does not negatively affect the strength of the concrete. Redistribution of aggregates after compaction often creates non-homogeneity due to the influence of vibration. This can lead to strength gradients. Decorative stones such as quartzite , small river stones or crushed glass are sometimes added to

5148-478: The three meter long stem tetrapod , Gaiasia , was discovered in the Ugab River Valley in 2015 and described in 2024. Sand Sand is a granular material composed of finely divided mineral particles. Sand has various compositions but is defined by its grain size. Sand grains are smaller than gravel and coarser than silt . Sand can also refer to a textural class of soil or soil type; i.e.,

5226-493: The user to wear respiratory protection to avoid breathing the resulting fine silica dust . Safety data sheets for silica sand state that "excessive inhalation of crystalline silica is a serious health concern." In areas of high pore water pressure , sand and salt water can form quicksand , which is a colloid hydrogel that behaves like a liquid. Quicksand produces a considerable barrier to escape for creatures caught within, who often die from exposure (not from submersion) as

5304-655: The various ingredients used to produce a given quantity of concrete, the cement is the most energetically expensive. Even complex and efficient kilns require 3.3 to 3.6 gigajoules of energy to produce a ton of clinker and then grind it into cement . Many kilns can be fueled with difficult-to-dispose-of wastes, the most common being used tires. The extremely high temperatures and long periods of time at those temperatures allows cement kilns to efficiently and completely burn even difficult-to-use fuels. The five major compounds of calcium silicates and aluminates comprising Portland cement range from 5 to 50% in weight. Combining water with

5382-439: The water content or adding chemical admixtures increases concrete workability. Excessive water leads to increased bleeding or segregation of aggregates (when the cement and aggregates start to separate), with the resulting concrete having reduced quality. Changes in gradation can also affect workability of the concrete, although a wide range of gradation can be used for various applications. An undesirable gradation can mean using

5460-428: The years into vaguely recognisable shapes, some looking like toadstools , while others are eerie hollow structures known as the 'Petrified Ghosts'. Quite a few plants species can be found in the area - including wild tobacco ( Nicotiana glauca ), acacia trees, mopani trees and ǃnara bushes ( Acanthosicyos horridus ) with their almost-leafless spiky green stems, and spiky melon-like fruit. The type specimen of

5538-515: Was Smeaton's Tower , built by British engineer John Smeaton in Devon , England, between 1756 and 1759. This third Eddystone Lighthouse pioneered the use of hydraulic lime in concrete, using pebbles and powdered brick as aggregate. A method for producing Portland cement was developed in England and patented by Joseph Aspdin in 1824. Aspdin chose the name for its similarity to Portland stone , which

5616-621: Was 9.55 billion tons as part of a $ 99.5 billion industry. In April 2022, the United Nations Environment Programme (UNEP) published a report stating that 50 billion tons of sand and gravel were being used every year. The report made 10 recommendations, including a ban on beach extraction, to avert a crisis, and move toward a circular economy for the two resources. While sand is generally non-toxic, sand-using activities such as sandblasting require precautions. Bags of silica sand used for sandblasting now carry labels warning

5694-622: Was built largely of concrete, and the Pantheon has the world's largest unreinforced concrete dome. Concrete, as the Romans knew it, was a new and revolutionary material. Laid in the shape of arches , vaults and domes , it quickly hardened into a rigid mass, free from many of the internal thrusts and strains that troubled the builders of similar structures in stone or brick. Modern tests show that opus caementicium had as much compressive strength as modern Portland-cement concrete (c. 200 kg/cm  [20 MPa; 2,800 psi]). However, due to

5772-602: Was greatly reduced. Low kiln temperatures in the burning of lime, lack of pozzolana, and poor mixing all contributed to a decline in the quality of concrete and mortar. From the 11th century, the increased use of stone in church and castle construction led to an increased demand for mortar. Quality began to improve in the 12th century through better grinding and sieving. Medieval lime mortars and concretes were non-hydraulic and were used for binding masonry, "hearting" (binding rubble masonry cores) and foundations. Bartholomaeus Anglicus in his De proprietatibus rerum (1240) describes

5850-448: Was made from quicklime , pozzolana and an aggregate of pumice . Its widespread use in many Roman structures , a key event in the history of architecture termed the Roman architectural revolution , freed Roman construction from the restrictions of stone and brick materials. It enabled revolutionary new designs in terms of both structural complexity and dimension. The Colosseum in Rome

5928-493: Was pioneered by the Nabatean traders who occupied and controlled a series of oases and developed a small empire in the regions of southern Syria and northern Jordan from the 4th century BC. They discovered the advantages of hydraulic lime , with some self-cementing properties, by 700 BC. They built kilns to supply mortar for the construction of rubble masonry houses, concrete floors, and underground waterproof cisterns . They kept

6006-614: Was quarried on the Isle of Portland in Dorset , England. His son William continued developments into the 1840s, earning him recognition for the development of "modern" Portland cement. Reinforced concrete was invented in 1849 by Joseph Monier . and the first reinforced concrete house was built by François Coignet in 1853. The first concrete reinforced bridge was designed and built by Joseph Monier in 1875. Prestressed concrete and post-tensioned concrete were pioneered by Eugène Freyssinet ,

6084-615: Was used for construction in many ancient structures. Mayan concrete at the ruins of Uxmal (AD 850–925) is referenced in Incidents of Travel in the Yucatán by John L. Stephens . "The roof is flat and had been covered with cement". "The floors were cement, in some places hard, but, by long exposure, broken, and now crumbling under the feet." "But throughout the wall was solid, and consisting of large stones imbedded in mortar, almost as hard as rock." Small-scale production of concrete-like materials

#747252