Misplaced Pages

#661338

75-520: Included an all new short story in Nagaru Tanigawa 's Haruhi Suzumiya series. The included draft was called "Seven Wonders Overtime". It was considered rather long for a short story as it was around 120 Japanese manuscript pages long. The special issue also included an extended interview and new short Story by Ryo Mizuno for Record of Lodoss War . introduced a new short story and a short manga interview centered around KonoSuba . The cover art of

150-459: A CPU include the arithmetic–logic unit (ALU) that performs arithmetic and logic operations , processor registers that supply operands to the ALU and store the results of ALU operations, and a control unit that orchestrates the fetching (from memory) , decoding and execution (of instructions) by directing the coordinated operations of the ALU, registers, and other components. Modern CPUs devote

225-482: A CPU may also contain memory , peripheral interfaces, and other components of a computer; such integrated devices are variously called microcontrollers or systems on a chip (SoC). Early computers such as the ENIAC had to be physically rewired to perform different tasks, which caused these machines to be called "fixed-program computers". The "central processing unit" term has been in use since as early as 1955. Since

300-402: A cache had only one level of cache; unlike later level 1 caches, it was not split into L1d (for data) and L1i (for instructions). Almost all current CPUs with caches have a split L1 cache. They also have L2 caches and, for larger processors, L3 caches as well. The L2 cache is usually not split and acts as a common repository for the already split L1 cache. Every core of a multi-core processor has

375-400: A code from the control unit indicating which operation to perform. Depending on the instruction being executed, the operands may come from internal CPU registers , external memory, or constants generated by the ALU itself. When all input signals have settled and propagated through the ALU circuitry, the result of the performed operation appears at the ALU's outputs. The result consists of both

450-458: A data word, which may be stored in a register or memory, and status information that is typically stored in a special, internal CPU register reserved for this purpose. Modern CPUs typically contain more than one ALU to improve performance. The address generation unit (AGU), sometimes also called the address computation unit (ACU), is an execution unit inside the CPU that calculates addresses used by

525-458: A dedicated L2 cache and is usually not shared between the cores. The L3 cache, and higher-level caches, are shared between the cores and are not split. An L4 cache is currently uncommon, and is generally on dynamic random-access memory (DRAM), rather than on static random-access memory (SRAM), on a separate die or chip. That was also the case historically with L1, while bigger chips have allowed integration of it and generally all cache levels, with

600-555: A global clock signal. Two notable examples of this are the ARM compliant AMULET and the MIPS R3000 compatible MiniMIPS. Rather than totally removing the clock signal, some CPU designs allow certain portions of the device to be asynchronous, such as using asynchronous ALUs in conjunction with superscalar pipelining to achieve some arithmetic performance gains. While it is not altogether clear whether totally asynchronous designs can perform at

675-460: A hundred or more gates, was to build them using a metal–oxide–semiconductor (MOS) semiconductor manufacturing process (either PMOS logic , NMOS logic , or CMOS logic). However, some companies continued to build processors out of bipolar transistor–transistor logic (TTL) chips because bipolar junction transistors were faster than MOS chips up until the 1970s (a few companies such as Datapoint continued to build processors out of TTL chips until

750-522: A lot of semiconductor area to caches and instruction-level parallelism to increase performance and to CPU modes to support operating systems and virtualization . Most modern CPUs are implemented on integrated circuit (IC) microprocessors , with one or more CPUs on a single IC chip. Microprocessor chips with multiple CPUs are called multi-core processors . The individual physical CPUs, called processor cores , can also be multithreaded to support CPU-level multithreading. An IC that contains

825-411: A memory management unit, translating logical addresses into physical RAM addresses, providing memory protection and paging abilities, useful for virtual memory . Simpler processors, especially microcontrollers , usually don't include an MMU. A CPU cache is a hardware cache used by the central processing unit (CPU) of a computer to reduce the average cost (time or energy) to access data from

SECTION 10

#1732854782662

900-456: A number that identifies the address of the next instruction to be fetched. After an instruction is fetched, the PC is incremented by the length of the instruction so that it will contain the address of the next instruction in the sequence. Often, the instruction to be fetched must be retrieved from relatively slow memory, causing the CPU to stall while waiting for the instruction to be returned. This issue

975-554: A time. Some CPU architectures include multiple AGUs so more than one address-calculation operation can be executed simultaneously, which brings further performance improvements due to the superscalar nature of advanced CPU designs. For example, Intel incorporates multiple AGUs into its Sandy Bridge and Haswell microarchitectures , which increase bandwidth of the CPU memory subsystem by allowing multiple memory-access instructions to be executed in parallel. Many microprocessors (in smartphones and desktop, laptop, server computers) have

1050-446: A useful computer requires thousands or tens of thousands of switching devices. The overall speed of a system is dependent on the speed of the switches. Vacuum-tube computers such as EDVAC tended to average eight hours between failures, whereas relay computers—such as the slower but earlier Harvard Mark I —failed very rarely. In the end, tube-based CPUs became dominant because the significant speed advantages afforded generally outweighed

1125-439: A very small number of ICs; usually just one. The overall smaller CPU size, as a result of being implemented on a single die, means faster switching time because of physical factors like decreased gate parasitic capacitance . This has allowed synchronous microprocessors to have clock rates ranging from tens of megahertz to several gigahertz. Additionally, the ability to construct exceedingly small transistors on an IC has increased

1200-410: Is a stub . You can help Misplaced Pages by expanding it . See tips for writing articles about magazines . Further suggestions might be found on the article's talk page . This light novel -related article is a stub . You can help Misplaced Pages by expanding it . Nagaru Tanigawa Nagaru Tanigawa ( 谷川 流 , Tanigawa Nagaru , born December 19, 1970) is a Japanese author . He is a graduate of

1275-400: Is defined by the CPU's instruction set architecture (ISA). Often, one group of bits (that is, a "field") within the instruction, called the opcode, indicates which operation is to be performed, while the remaining fields usually provide supplemental information required for the operation, such as the operands. Those operands may be specified as a constant value (called an immediate value), or as

1350-494: Is generally referred to as the " classic RISC pipeline ", which is quite common among the simple CPUs used in many electronic devices (often called microcontrollers). It largely ignores the important role of CPU cache, and therefore the access stage of the pipeline. Some instructions manipulate the program counter rather than producing result data directly; such instructions are generally called "jumps" and facilitate program behavior like loops , conditional program execution (through

1425-479: Is greater or whether they are equal; one of these flags could then be used by a later jump instruction to determine program flow. Fetch involves retrieving an instruction (which is represented by a number or sequence of numbers) from program memory. The instruction's location (address) in program memory is determined by the program counter (PC; called the "instruction pointer" in Intel x86 microprocessors ), which stores

1500-400: Is largely addressed in modern processors by caches and pipeline architectures (see below). The instruction that the CPU fetches from memory determines what the CPU will do. In the decode step, performed by binary decoder circuitry known as the instruction decoder , the instruction is converted into signals that control other parts of the CPU. The way in which the instruction is interpreted

1575-524: Is most often credited with the design of the stored-program computer because of his design of EDVAC, and the design became known as the von Neumann architecture , others before him, such as Konrad Zuse , had suggested and implemented similar ideas. The so-called Harvard architecture of the Harvard Mark I , which was completed before EDVAC, also used a stored-program design using punched paper tape rather than electronic memory. The key difference between

SECTION 20

#1732854782662

1650-723: Is the IBM PowerPC -based Xenon used in the Xbox 360 ; this reduces the power requirements of the Xbox 360. Another method of addressing some of the problems with a global clock signal is the removal of the clock signal altogether. While removing the global clock signal makes the design process considerably more complex in many ways, asynchronous (or clockless) designs carry marked advantages in power consumption and heat dissipation in comparison with similar synchronous designs. While somewhat uncommon, entire asynchronous CPUs have been built without using

1725-485: The IBM z13 has a 96 KiB L1 instruction cache. Most CPUs are synchronous circuits , which means they employ a clock signal to pace their sequential operations. The clock signal is produced by an external oscillator circuit that generates a consistent number of pulses each second in the form of a periodic square wave . The frequency of the clock pulses determines the rate at which a CPU executes instructions and, consequently,

1800-539: The Manchester Mark 1 ran its first program during the night of 16–17 June 1949. Early CPUs were custom designs used as part of a larger and sometimes distinctive computer. However, this method of designing custom CPUs for a particular application has largely given way to the development of multi-purpose processors produced in large quantities. This standardization began in the era of discrete transistor mainframes and minicomputers , and has rapidly accelerated with

1875-474: The main memory . A cache is a smaller, faster memory, closer to a processor core , which stores copies of the data from frequently used main memory locations . Most CPUs have different independent caches, including instruction and data caches , where the data cache is usually organized as a hierarchy of more cache levels (L1, L2, L3, L4, etc.). All modern (fast) CPUs (with few specialized exceptions ) have multiple levels of CPU caches. The first CPUs that used

1950-816: The original manga , in particular enjoying Urusei Yatsura 2: Beautiful Dreamer . Haruhi Suzumiya ( 涼宮ハルヒ , Suzumiya Haruhi ) CPU A central processing unit ( CPU ), also called a central processor , main processor , or just processor , is the most important processor in a given computer . Its electronic circuitry executes instructions of a computer program , such as arithmetic , logic, controlling, and input/output (I/O) operations. This role contrasts with that of external components, such as main memory and I/O circuitry, and specialized coprocessors such as graphics processing units (GPUs). The form, design , and implementation of CPUs have changed over time, but their fundamental operation remains almost unchanged. Principal components of

2025-490: The 24th Sneaker Awards. When he was in high school, Tanigawa attended art club and also showed up at the literature club once a week. In university, he was a member of the painting club. After graduating from college, he worked at a women's clothing store as a manager, but suddenly felt like quitting and becoming a writer. While receiving unemployment insurance, Tanigawa frequented the library to read as much as possible. Just as his savings were running out and he felt that he

2100-450: The AGU, various address-generation calculations can be offloaded from the rest of the CPU, and can often be executed quickly in a single CPU cycle. Capabilities of an AGU depend on a particular CPU and its architecture . Thus, some AGUs implement and expose more address-calculation operations, while some also include more advanced specialized instructions that can operate on multiple operands at

2175-431: The ALU's output word size), an arithmetic overflow flag will be set, influencing the next operation. Hardwired into a CPU's circuitry is a set of basic operations it can perform, called an instruction set . Such operations may involve, for example, adding or subtracting two numbers, comparing two numbers, or jumping to a different part of a program. Each instruction is represented by a unique combination of bits , known as

2250-468: The CPU can fetch the data from actual memory locations. Those address-generation calculations involve different integer arithmetic operations , such as addition, subtraction, modulo operations , or bit shifts . Often, calculating a memory address involves more than one general-purpose machine instruction, which do not necessarily decode and execute quickly. By incorporating an AGU into a CPU design, together with introducing specialized instructions that use

2325-479: The CPU to access main memory . By having address calculations handled by separate circuitry that operates in parallel with the rest of the CPU, the number of CPU cycles required for executing various machine instructions can be reduced, bringing performance improvements. While performing various operations, CPUs need to calculate memory addresses required for fetching data from the memory; for example, in-memory positions of array elements must be calculated before

The Sneaker - Misplaced Pages Continue

2400-422: The CPU to malfunction. Another major issue, as clock rates increase dramatically, is the amount of heat that is dissipated by the CPU . The constantly changing clock causes many components to switch regardless of whether they are being used at that time. In general, a component that is switching uses more energy than an element in a static state. Therefore, as clock rate increases, so does energy consumption, causing

2475-467: The CPU to require more heat dissipation in the form of CPU cooling solutions. One method of dealing with the switching of unneeded components is called clock gating , which involves turning off the clock signal to unneeded components (effectively disabling them). However, this is often regarded as difficult to implement and therefore does not see common usage outside of very low-power designs. One notable recent CPU design that uses extensive clock gating

2550-431: The advent and eventual success of the ubiquitous personal computer , the term CPU is now applied almost exclusively to microprocessors. Several CPUs (denoted cores ) can be combined in a single processing chip. Previous generations of CPUs were implemented as discrete components and numerous small integrated circuits (ICs) on one or more circuit boards. Microprocessors, on the other hand, are CPUs manufactured on

2625-428: The advent of the transistor . Transistorized CPUs during the 1950s and 1960s no longer had to be built out of bulky, unreliable, and fragile switching elements, like vacuum tubes and relays . With this improvement, more complex and reliable CPUs were built onto one or several printed circuit boards containing discrete (individual) components. In 1964, IBM introduced its IBM System/360 computer architecture that

2700-564: The complexity and number of transistors in a single CPU many fold. This widely observed trend is described by Moore's law , which had proven to be a fairly accurate predictor of the growth of CPU (and other IC) complexity until 2016. While the complexity, size, construction and general form of CPUs have changed enormously since 1950, the basic design and function has not changed much at all. Almost all common CPUs today can be very accurately described as von Neumann stored-program machines. As Moore's law no longer holds, concerns have arisen about

2775-423: The complexity scale, a machine language program is a collection of machine language instructions that the CPU executes. The actual mathematical operation for each instruction is performed by a combinational logic circuit within the CPU's processor known as the arithmetic–logic unit or ALU. In general, a CPU executes an instruction by fetching it from memory, using its ALU to perform an operation, and then storing

2850-486: The control unit as part of the von Neumann architecture . In modern computer designs, the control unit is typically an internal part of the CPU with its overall role and operation unchanged since its introduction. The arithmetic logic unit (ALU) is a digital circuit within the processor that performs integer arithmetic and bitwise logic operations. The inputs to the ALU are the data words to be operated on (called operands ), status information from previous operations, and

2925-453: The desired operation. The action is then completed, typically in response to a clock pulse. Very often the results are written to an internal CPU register for quick access by subsequent instructions. In other cases results may be written to slower, but less expensive and higher capacity main memory . For example, if an instruction that performs addition is to be executed, registers containing operands (numbers to be summed) are activated, as are

3000-429: The drawbacks of globally synchronous CPUs. For example, a clock signal is subject to the delays of any other electrical signal. Higher clock rates in increasingly complex CPUs make it more difficult to keep the clock signal in phase (synchronized) throughout the entire unit. This has led many modern CPUs to require multiple identical clock signals to be provided to avoid delaying a single signal significantly enough to cause

3075-453: The early 1980s). In the 1960s, MOS ICs were slower and initially considered useful only in applications that required low power. Following the development of silicon-gate MOS technology by Federico Faggin at Fairchild Semiconductor in 1968, MOS ICs largely replaced bipolar TTL as the standard chip technology in the early 1970s. As the microelectronic technology advanced, an increasing number of transistors were placed on ICs, decreasing

The Sneaker - Misplaced Pages Continue

3150-578: The era of specialized supercomputers like those made by Cray Inc and Fujitsu Ltd . During this period, a method of manufacturing many interconnected transistors in a compact space was developed. The integrated circuit (IC) allowed a large number of transistors to be manufactured on a single semiconductor -based die , or "chip". At first, only very basic non-specialized digital circuits such as NOR gates were miniaturized into ICs. CPUs based on these "building block" ICs are generally referred to as "small-scale integration" (SSI) devices. SSI ICs, such as

3225-503: The execution of an instruction, the entire process repeats, with the next instruction cycle normally fetching the next-in-sequence instruction because of the incremented value in the program counter . If a jump instruction was executed, the program counter will be modified to contain the address of the instruction that was jumped to and program execution continues normally. In more complex CPUs, multiple instructions can be fetched, decoded and executed simultaneously. This section describes what

3300-590: The existence of dōjin and eroge until the writing of The Melancholy of Haruhi Suzumiya . He enjoys playing mahjong and likes motorcycles . He uses a thumb-shift keyboard . Tanigawa has said that his work is influenced by the science fiction and young adult novels he read during junior high school. In particular, he cites Hideyuki Kikuchi , Baku Yumemakura , Ellery Queen , S. S. Van Dine , and Isaac Asimov as major influences. In an interview with screenwriter Dai Satō , he said that he prefers Mamoru Oshii 's anime film adaptations of Urusei Yatsura to

3375-401: The faster the clock, the more instructions the CPU will execute each second. To ensure proper operation of the CPU, the clock period is longer than the maximum time needed for all signals to propagate (move) through the CPU. In setting the clock period to a value well above the worst-case propagation delay , it is possible to design the entire CPU and the way it moves data around the "edges" of

3450-555: The individual transistors used by the PDP-8 and PDP-10 to SSI ICs, and their extremely popular PDP-11 line was originally built with SSI ICs, but was eventually implemented with LSI components once these became practical. Lee Boysel published influential articles, including a 1967 "manifesto", which described how to build the equivalent of a 32-bit mainframe computer from a relatively small number of large-scale integration circuits (LSI). The only way to build LSI chips, which are chips with

3525-589: The law school at Kwansei Gakuin University . He is best known as the creator of the Haruhi Suzumiya series for which he won the grand prize at the eighth annual Sneaker Awards and has been adapted into an anime television series. While Tanigawa was on hiatus from writing his light novel series, he wrote the manga series Amnesia Labyrinth , which was serialized in Dengeki Bunko Magazine . Tanigawa

3600-439: The limits of integrated circuit transistor technology. Extreme miniaturization of electronic gates is causing the effects of phenomena like electromigration and subthreshold leakage to become much more significant. These newer concerns are among the many factors causing researchers to investigate new methods of computing such as the quantum computer , as well as to expand the use of parallelism and other methods that extend

3675-408: The location of a value that may be a processor register or a memory address, as determined by some addressing mode . In some CPU designs, the instruction decoder is implemented as a hardwired, unchangeable binary decoder circuit. In others, a microprogram is used to translate instructions into sets of CPU configuration signals that are applied sequentially over multiple clock pulses. In some cases

3750-406: The machine language opcode . While processing an instruction, the CPU decodes the opcode (via a binary decoder ) into control signals, which orchestrate the behavior of the CPU. A complete machine language instruction consists of an opcode and, in many cases, additional bits that specify arguments for the operation (for example, the numbers to be summed in the case of an addition operation). Going up

3825-421: The memory that stores the microprogram is rewritable, making it possible to change the way in which the CPU decodes instructions. After the fetch and decode steps, the execute step is performed. Depending on the CPU architecture, this may consist of a single action or a sequence of actions. During each action, control signals electrically enable or disable various parts of the CPU so they can perform all or part of

SECTION 50

#1732854782662

3900-706: The number of individual ICs needed for a complete CPU. MSI and LSI ICs increased transistor counts to hundreds, and then thousands. By 1968, the number of ICs required to build a complete CPU had been reduced to 24 ICs of eight different types, with each IC containing roughly 1000 MOSFETs. In stark contrast with its SSI and MSI predecessors, the first LSI implementation of the PDP-11 contained a CPU composed of only four LSI integrated circuits. Since microprocessors were first introduced they have almost completely overtaken all other central processing unit implementation methods. The first commercially available microprocessor, made in 1971,

3975-567: The ones used in the Apollo Guidance Computer , usually contained up to a few dozen transistors. To build an entire CPU out of SSI ICs required thousands of individual chips, but still consumed much less space and power than earlier discrete transistor designs. IBM's System/370 , follow-on to the System/360, used SSI ICs rather than Solid Logic Technology discrete-transistor modules. DEC's PDP-8 /I and KI10 PDP-10 also switched from

4050-409: The parts of the arithmetic logic unit (ALU) that perform addition. When the clock pulse occurs, the operands flow from the source registers into the ALU, and the sum appears at its output. On subsequent clock pulses, other components are enabled (and disabled) to move the output (the sum of the operation) to storage (e.g., a register or memory). If the resulting sum is too large (i.e., it is larger than

4125-537: The physical wiring of the computer. This overcame a severe limitation of ENIAC, which was the considerable time and effort required to reconfigure the computer to perform a new task. With von Neumann's design, the program that EDVAC ran could be changed simply by changing the contents of the memory. EDVAC was not the first stored-program computer; the Manchester Baby , which was a small-scale experimental stored-program computer, ran its first program on 21 June 1948 and

4200-501: The popularization of the integrated circuit (IC). The IC has allowed increasingly complex CPUs to be designed and manufactured to tolerances on the order of nanometers . Both the miniaturization and standardization of CPUs have increased the presence of digital devices in modern life far beyond the limited application of dedicated computing machines. Modern microprocessors appear in electronic devices ranging from automobiles to cellphones, and sometimes even in toys. While von Neumann

4275-473: The possible exception of the last level. Each extra level of cache tends to be bigger and is optimized differently. Other types of caches exist (that are not counted towards the "cache size" of the most important caches mentioned above), such as the translation lookaside buffer (TLB) that is part of the memory management unit (MMU) that most CPUs have. Caches are generally sized in powers of two: 2, 8, 16 etc. KiB or MiB (for larger non-L1) sizes, although

4350-448: The processor. It tells the computer's memory, arithmetic and logic unit and input and output devices how to respond to the instructions that have been sent to the processor. It directs the operation of the other units by providing timing and control signals. Most computer resources are managed by the CU. It directs the flow of data between the CPU and the other devices. John von Neumann included

4425-478: The reliability problems. Most of these early synchronous CPUs ran at low clock rates compared to modern microelectronic designs. Clock signal frequencies ranging from 100 kHz to 4 MHz were very common at this time, limited largely by the speed of the switching devices they were built with. The design complexity of CPUs increased as various technologies facilitated the building of smaller and more reliable electronic devices. The first such improvement came with

4500-409: The result to memory. Besides the instructions for integer mathematics and logic operations, various other machine instructions exist, such as those for loading data from memory and storing it back, branching operations, and mathematical operations on floating-point numbers performed by the CPU's floating-point unit (FPU). The control unit (CU) is a component of the CPU that directs the operation of

4575-484: The rising and falling clock signal. This has the advantage of simplifying the CPU significantly, both from a design perspective and a component-count perspective. However, it also carries the disadvantage that the entire CPU must wait on its slowest elements, even though some portions of it are much faster. This limitation has largely been compensated for by various methods of increasing CPU parallelism (see below). However, architectural improvements alone do not solve all of

SECTION 60

#1732854782662

4650-456: The same year, the eighth Sneaker award-winning novel The Melancholy of Haruhi Suzumiya and Tanigawa's Escape from The School! were released on the same day. The Haruhi Suzumiya series has sold 8 million copies in Japan and has been sold in 15 countries around the world, with a total of 16.5 million novel and manga copies sold by May 2011. In 2018, he was a member of the selection committee for

4725-540: The short switching time of a transistor in comparison to a tube or relay. The increased reliability and dramatically increased speed of the switching elements, which were almost exclusively transistors by this time; CPU clock rates in the tens of megahertz were easily obtained during this period. Additionally, while discrete transistor and IC CPUs were in heavy usage, new high-performance designs like single instruction, multiple data (SIMD) vector processors began to appear. These early experimental designs later gave rise to

4800-568: The special edition was drawn by two artists Kurone Mishima and Noizi Ito . The art consisted of Aqua from KonoSuba , and Haruhi from Haruhi Suzumiya . The choice of each artist was due to each of them being familiar with each property. Kurone Mishima being the main artist for KonoSuba and Noizi Ito having been the main artist for Haruhi Suzumiya . Unlike the formerly mentioned short stories, Sagrada Reset , Rental Magica , and Trinity Blood received special features and new illustrations. This Japanese magazine or journal-related article

4875-545: The success of Haruhi Suzumiya , he is not sure whether he is truly a writer or not. In an interview with his editor, Tanigawa was described as a "very quiet and knowledgeable person who uses his ' CPU ' and memory to select the knowledge stored in the large hard-disk in his head before outputting in a concise and precise manner." He was present during the Great Hanshin earthquake . He is a Hanshin Tigers fan. He did not know of

4950-439: The term "CPU" is generally defined as a device for software (computer program) execution, the earliest devices that could rightly be called CPUs came with the advent of the stored-program computer . The idea of a stored-program computer had been already present in the design of John Presper Eckert and John William Mauchly 's ENIAC , but was initially omitted so that it could be finished sooner. On June 30, 1945, before ENIAC

5025-422: The use of a conditional jump), and existence of functions . In some processors, some other instructions change the state of bits in a "flags" register . These flags can be used to influence how a program behaves, since they often indicate the outcome of various operations. For example, in such processors a "compare" instruction evaluates two values and sets or clears bits in the flags register to indicate which one

5100-431: The usefulness of the classical von Neumann model. The fundamental operation of most CPUs, regardless of the physical form they take, is to execute a sequence of stored instructions that is called a program. The instructions to be executed are kept in some kind of computer memory . Nearly all CPUs follow the fetch, decode and execute steps in their operation, which are collectively known as the instruction cycle . After

5175-606: The von Neumann and Harvard architectures is that the latter separates the storage and treatment of CPU instructions and data, while the former uses the same memory space for both. Most modern CPUs are primarily von Neumann in design, but CPUs with the Harvard architecture are seen as well, especially in embedded applications; for instance, the Atmel AVR microcontrollers are Harvard-architecture processors. Relays and vacuum tubes (thermionic tubes) were commonly used as switching elements;

5250-403: Was "doomed", he was contacted by the editorial department of Dengeki Bunko, informing him that his novel The Melancholy of Haruhi Suzumiya had just won the grand prize of the annual Sneaker Awards. Tanigawa says that his desire to become a writer was triggered by reading various novels from his childhood, and that he gradually developed a "circuit in his mind that he wanted to write." Even after

5325-609: Was born in Nishinomiya City , Hyōgo Prefecture . He attended Hyōgo Prefectural Nishinomiya Kita High School before attending and graduating from the Kwansei Gakuin University with a degree in law. After graduating from university, he worked as a manager at a women's clothing store before making his official debut in March 2003 with the novel Dengeki!! Aegis 5 under Dengeki Bunko 's Dengeki Moeoh magazine. On June 7 of

5400-530: Was made, mathematician John von Neumann distributed a paper entitled First Draft of a Report on the EDVAC . It was the outline of a stored-program computer that would eventually be completed in August 1949. EDVAC was designed to perform a certain number of instructions (or operations) of various types. Significantly, the programs written for EDVAC were to be stored in high-speed computer memory rather than specified by

5475-640: Was so popular that it dominated the mainframe computer market for decades and left a legacy that is continued by similar modern computers like the IBM zSeries . In 1965, Digital Equipment Corporation (DEC) introduced another influential computer aimed at the scientific and research markets—the PDP-8 . Transistor-based computers had several distinct advantages over their predecessors. Aside from facilitating increased reliability and lower power consumption, transistors also allowed CPUs to operate at much higher speeds because of

5550-399: Was the Intel 4004 , and the first widely used microprocessor, made in 1974, was the Intel 8080 . Mainframe and minicomputer manufacturers of the time launched proprietary IC development programs to upgrade their older computer architectures , and eventually produced instruction set compatible microprocessors that were backward-compatible with their older hardware and software. Combined with

5625-429: Was used in a series of computers capable of running the same programs with different speeds and performances. This was significant at a time when most electronic computers were incompatible with one another, even those made by the same manufacturer. To facilitate this improvement, IBM used the concept of a microprogram (often called "microcode"), which still sees widespread use in modern CPUs. The System/360 architecture

#661338