Misplaced Pages

#429570

66-426: SMART-L ( Signaal Multibeam Acquisition Radar for Tracking, L band ) is a long-range naval search radar introduced in 2002 by Thales Nederland , formerly Hollandse Signaalapparaten (Signaal). The digital antenna array has 24 elements; all are used for reception, while 16 are used for creating virtual receiver beams through digital beamforming . The beams' vertical elevation, and compensation for ship movement,

132-401: A "difference" beam. To produce the sum beam the signal is distributed horizontally across the antenna aperture. This feed system is divided into two equal halves and the two parts summed again to produce the original sum beam. However the two halves are also subtracted to produce a difference output. A signal arriving exactly normal, or boresight, to the antenna will produce a maximum output in

198-502: A 16.125 μs data block. This can include an indication of the interrogator transmitting the All-Call with the request that if the aircraft has already replied to this interrogator then do not reply again as aircraft is already known and a reply unnecessary. The Mode S interrogation can take three forms: The first five bits, known as the uplink field (UF) in the data block indicate the type of interrogation. The final 24 bits in each case

264-417: A Mode A or C interrogation the transponder reply may take up to 120 μs before it can reply to a further interrogation. The ground antenna has a typical horizontal 3 dB beamwidth of 2.5° which limits the accuracy in determining the bearing of the aircraft. Accuracy can be improved by making many interrogations as the antenna beam scans an aircraft and a better estimate can be obtained by noting where

330-412: A chance overlapping pulse from another ground interrogator. The interrogation may be short with P6 = 16.125 μs, mainly used to obtain a position update, or long, P6 = 30.25 μs, if an additional 56 data bits are included. The final 24 bits contain both the parity and address of the aircraft. On receiving an interrogation, an aircraft will decode the data and calculate the parity. If the remainder

396-584: A directed turn by the aircraft. Primary radar is still used by ATC as a backup/complementary system to secondary radar, although its coverage and information is more limited. The need to be able to identify aircraft more easily and reliably led to another wartime radar development, the Identification Friend or Foe (IFF) system, which had been created as a means of positively identifying friendly aircraft from unknowns. This system, which became known in civil use as secondary surveillance radar (SSR), or in

462-628: A few feet could cross a threshold and be indicated as the next increment up and a change of 100 feet. Smaller increments were desirable. Since all aircraft reply on the same frequency of 1090 MHz, a ground station will also receive aircraft replies originating from responses to other ground stations. These unwanted replies are known as FRUIT (False Replies Unsynchronized with Interrogator Transmissions or alternatively False Replies Unsynchronized In Time). Several successive FRUIT replies could combine and appear to indicate an aircraft which does not exist. As air transport expands and more aircraft occupy

528-405: A long phase-modulated pulse. The ground antenna is highly directional but cannot be designed without sidelobes. Aircraft could also detect interrogations coming from these sidelobes and reply appropriately. However these replies can not be differentiated from the intended replies from the main beam and can give rise to a false aircraft indication at an erroneous bearing. To overcome this problem

594-431: A low-power interrogation test by Lincoln Laboratory successfully communicated with an upgraded commercial SSR transponder of UK manufacture. The only thing needed was an international name. Much had been made of the proposed new features but the existing ground SSR interrogators would still be used, albeit with modification, and the existing aircraft transponders, again with modification. The best way of showing that this

660-1020: A means of imaging the normally invisible neutral atomic hydrogen in interstellar space. The band also contains hydroxyl radical transition lines at 1665 and 1667 MHz. Consequently, parts of the L band are protected radio astronomy allocations worldwide. Specifically, the 1400–1427 MHz and 1660.6–1670.0 MHz regions are protected. ELF 3 Hz/100 Mm 30 Hz/10 Mm SLF 30 Hz/10 Mm 300 Hz/1 Mm ULF 300 Hz/1 Mm 3 kHz/100 km VLF 3 kHz/100 km 30 kHz/10 km LF 30 kHz/10 km 300 kHz/1 km MF 300 kHz/1 km 3 MHz/100 m HF 3 MHz/100 m 30 MHz/10 m VHF 30 MHz/10 m 300 MHz/1 m UHF 300 MHz/1 m 3 GHz/100 mm SHF 3 GHz/100 mm 30 GHz/10 mm EHF 30 GHz/10 mm 300 GHz/1 mm THF 300 GHz/1 mm 3 THz/0.1 mm Secondary surveillance radar Secondary surveillance radar ( SSR )

726-536: A means of providing continuous surveillance of air traffic disposition. Precise knowledge of the positions of aircraft would permit a reduction in the normal procedural separation standards, which in turn promised considerable increases in the efficiency of the airways system. This type of radar (called a primary radar ) can detect and report the position of anything that reflects its transmitted radio signals including, depending on its design, aircraft, birds, weather and land features. For air traffic control purposes this

SECTION 10

#1732845166430

792-421: A mode A & C transponder as coming from an antenna sidelobe and therefore a reply is not required. The following long P6 pulse is phase modulated with the first phase reversal, after 1.25 μs, synchronising the transponder's phase detector. Subsequent phase reversals indicate a data bit of 1, with no phase reversal indicating a bit of value 0. This form of modulation provides some resistance to corruption by

858-405: A mode A reply may seem enough, once particular codes have been reserved for emergency and other purposes, the number is significantly reduced. Ideally an aircraft would keep the same code from take-off until landing even when crossing international boundaries, as it is used at the air traffic control centre to display the aircraft's callsign using a process known as code/callsign conversion. Clearly

924-521: A new pair of frequencies would be required. Ullyatt showed that the existing 1030 MHz and 1090 MHz frequencies could be retained and the existing ground interrogators and airbornes transponders, with suitable modifications, could be used. The result was a Memorandum of Understanding between the US and the UK to develop a common system. In the US the programme was called DABS (Discrete Address Beacon System), and in

990-409: A primary radar) by transmitting a coded reply signal containing the requested information. Both the civilian SSR and the military IFF have become much more complex than their war-time ancestors, but remain compatible with each other, not least to allow military aircraft to operate in civil airspace. SSR can provide much more detailed information, for example, the aircraft altitude, as well as enabling

1056-416: A second pulse inserted in the other half of the bit period. Much more likely is that both halves are confused and the decoded bit is flagged as "low confidence". The reply also has parity and address in the final 24 bits. The ground station tracks the aircraft and uses the predicted position to indicate the range and bearing of the aircraft so it can interrogate again and get an update of its position. If it

1122-480: A single pulse, hence monopulse, but accuracy can be improved by averaging measurements made on several or all of the pulses received in a reply from an aircraft. A monopulse receiver was developed early in the UK Adsel programme and this design is still used widely. Mode S reply pulses are deliberately designed to be similar to mode A and C replies so the same receiver can be used to provide improved bearing measurement for

1188-422: Is a radar system used in air traffic control (ATC), that unlike primary radar systems that measure the bearing and distance of targets using the detected reflections of radio signals, relies on targets equipped with a radar transponder , that reply to each interrogation signal by transmitting encoded data such as an identity code, the aircraft's altitude and further information depending on its chosen mode. SSR

1254-408: Is based on the military identification friend or foe (IFF) technology originally developed during World War II ; therefore, the two systems are still compatible. Monopulse secondary surveillance radar ( MSSR ), Mode S , TCAS and ADS-B are similar modern methods of secondary surveillance. The rapid wartime development of radar had obvious applications for air traffic control (ATC) as

1320-411: Is both an advantage and a disadvantage. Its targets do not have to co-operate, they only have to be within its coverage and be able to reflect radio waves, but it only indicates the position of the targets, it does not identify them. When primary radar was the only type of radar available, the correlation of individual radar returns with specific aircraft typically was achieved by the controller observing

1386-484: Is combined aircraft address and parity. Not all permutations have yet been allocated but those that have are shown: Similarly the Mode S reply can take three forms: The first five bits, known as the downlink field (DF) in the data block indicate the type of reply. The final 24 bits in each case is combined aircraft address and parity. Eleven permutations have been allocated. A transponder equipped to transmit Comm-B replies

SECTION 20

#1732845166430

1452-422: Is divided into two parts. If a 0.5 μs pulse occupies the first half and there is no pulse in the second half then a binary 1 is indicated. If it is the other way round then it represents a binary 0. In effect the data is transmitted twice, the second time in inverted form. This format is very resistant to error due to a garbling reply from another aircraft. To cause a hard error one pulse has to be cancelled and

1518-447: Is done electronically. Horizontal training is done by mechanically rotating the entire array. As designed, SMART-L has a maximum range of 400 km (220  nmi ) against patrol aircraft , and 65 km (35 nmi) against stealthy missiles. A software upgrade, Extended Long Range (ELR) Mode, extends the maximum range for the detection of ballistic missiles to over 2000 km, since 2018 all four Zeven Provincien class Frigates of

1584-428: Is expecting a reply and if it receives one then it checks the remainder from the parity check against the address of the expected aircraft. If it is not the same then either it is the wrong aircraft and a re-interrogation is necessary, or the reply has been corrupted by interference by being garbled by another reply. The parity system has the power to correct errors as long as they do not exceed 24 μs, which embraces

1650-540: Is fitted with 256 data registers each of 56 bits. The contents of these registers are filled and maintained from on-board data sources. If the ground system requires this data then it requests it by a Surveillance or Comm-A interrogation. ICAO Annex 10 Volume III, Chapter 5 lists the contents of all those currently allocated. A reduced number are required for current operational use. Other registers are intended for use with TCAS and ADS-B. The Comm-B Data Selector (BDS) numbers are in hexadecimal notation. Starting in 2009,

1716-493: Is not the address of the aircraft then either the interrogation was not intended for it or it was corrupted. In either case it will not reply. If the ground station was expecting a reply and did not receive one then it will re-interrogate. The aircraft reply consists of a preamble of four pulses spaced so that they cannot be erroneously formed from overlapping mode A or C replies. The remaining pulses contain data using pulse position amplitude modulation . Each 1 μs interval

1782-470: Is not used), indicating aircraft altitude as indicated by its altimeter in 100-foot increments. Mode B gave a similar response to mode A and was at one time used in Australia. Mode D has never been used operationally. The new mode, Mode S, has different interrogation characteristics. It comprises pulses P1 and P2 from the antenna main beam to ensure that Mode-A and Mode-C transponders do not reply, followed by

1848-486: Is separately labelled with direction this information can be used to unscramble two overlapping mode A or C replies. The process is presented in ATC-65 "The ATCRBS Mode of DABS". The approach can be taken further by also measuring the strength of each reply pulse and using that as a discriminate as well. The following table compares the performance of conventional SSR, monopulse SSR (MSSR) and Mode S. The MSSR replaced most of

1914-568: The GLONASS System, and the BeiDou systems use the L band similar to GPS, although the frequency ranges are named differently. Modern receivers, such as those found in smartphones , are able to take advantage of multiple systems (usually only around the oldest L1 band) at the same time. Mobile phones operate at 600–900 and 1700–2100 MHz. Iridium Communications satellite phones use frequencies between 1616 and 1626.5 MHz to communicate with

1980-781: The International Telecommunication Union allow amateur radio operations in the frequency range 1,240–1,300 MHz, and amateur satellite up-links are allowed in the range 1,260–1,270 MHz. This is known as the 23-centimeter band by radio amateurs and as the L-band by AMSAT . In the United States and overseas territories , the L band is held by the military for telemetry , thereby forcing digital radio to in-band on-channel (IBOC) solutions. Digital Audio Broadcasting (DAB) in Europe primarily uses Band III , but

2046-618: The Air Traffic Control systems in all countries that may be visited. Volume III, Part 1 is concerned with digital data communication systems including the data link functions of Mode S while volume IV defines its operation and signals in space. The American Radio Technical Commission for Aeronautics (RTCA) and the European Organization for Civil Aviation Equipment (Eurocae) produce Minimum Operational Performance Standards for both ground and airborne equipment in accordance with

SMART-L - Misplaced Pages Continue

2112-757: The Royal Netherlands Navy have been equipped with the update. On the 25th of September 2017, as part of the exercise Formidable Shield 2017 the SMART-L MM radar system mounted on the test tower at the Thales premises in Hengelo, detected and tracked a ballistic missile launched from the Hebrides in Scotland at an average range of more than 1500 km without difficulties. The Thales SMART-L Multi Mission radar in Hengelo detected

2178-448: The SSR interrogation signal and transmits a reply on 1090 MHz that provides aircraft information. The reply sent depends on the interrogation mode. The aircraft is displayed as a tagged icon on the controller's radar screen at the measured bearing and range. An aircraft without an operating transponder still may be observed by primary radar, but would be displayed to the controller without

2244-418: The SSR mode A and C system with the advantage that the interrogation rate can be substantially reduced thereby reducing the interference caused to other users of the system. Lincoln Laboratory exploited the availability of a separate bearing measurement on each reply pulse to overcome some of the problems of garble whereby two replies overlap making associating the pulses with the two replies. Since each pulse

2310-429: The UK Adsel (Address selective). Monopulse, which means single pulse, had been used in military track-and-follow systems whereby the antenna was steered to follow a particular target by keeping the target in the centre of the beam. Ullyatt proposed the use of a continuously rotating beam with bearing measurement made wherever the pulse may arrive in the beam. The FAA engaged MIT Lincoln Laboratory to further develop

2376-402: The US as the air traffic control radar beacon system (ATCRBS), relies on a piece of equipment aboard the aircraft known as a " transponder ." The transponder is a radio receiver and transmitter pair which receives on 1030 MHz and transmits on 1090 MHz. The target aircraft transponder replies to signals from an interrogator (usually, but not necessarily, a ground station co-located with

2442-454: The address could readily identify them also. The Lincoln Laboratory report ATC 42 entitled Mode S Beacon System: Functional Description gave details on the proposed new system. The two countries reported the results of their development in a joint paper, ADSEL/DABS – A Selective Address Secondary Surveillance Radar . This was followed at a conference at ICAO Headquarters in Montreal, at which

2508-463: The aircraft. A third pulse, P2, is for side lobe suppression and is described later. Not included are additional military (or IFF) modes, which are described in Identification Friend or Foe . A mode-A interrogation elicits a 12-pulse reply, indicating an identity number associated with that aircraft. The 12 data pulses are bracketed by two framing pulses, F1 and F2. The X pulse is not used. A mode-C interrogation produces an 11-pulse response (pulse D1

2574-515: The airspace, the amount of FRUIT generated will also increase. FRUIT replies can overlap with wanted replies at a ground receiver, thus causing errors in extracting the included data. A solution is to increase the interrogation rate so as to receive more replies, in the hope that some would be clear of interference. The process is self-defeating as increasing the reply rate only increases the interference to other users and vice versa. If two aircraft paths cross within about two miles slant range from

2640-751: The base station to the mobile device; i.e., in the downlink direction. In the Americas, mobile services are operated between the 1.7 GHz to 2.1 GHz range in the PCS and AWS bands. The Global Positioning System carriers are in the L band, centered at 1176.45 MHz (L5), 1227.60 MHz (L2), 1381.05 MHz (L3), and 1575.42 MHz (L1) frequencies. L band waves are used for GPS units because they are able to penetrate clouds, fog, rain, storms, and vegetation. Only dense environments such as heavy forest canopies or concrete buildings can cause GPS units to receive data inaccurately. The Galileo Navigation System ,

2706-434: The bearing of the aircraft thereby reducing to one the number of interrogations/replies per aircraft on each scan of the antenna. Further each interrogation would be preceded by main beam pulses P1 and P2 separated by 2 μs so that transponders operating on modes A and C would take it as coming from the antenna sidelobe and not reply and not cause unnecessary FRUIT. The FAA was considering similar problems but assumed that

SMART-L - Misplaced Pages Continue

2772-399: The benefit of SSR derived data. It is typically a requirement to have a working transponder in order to fly in controlled air space and many aircraft have a back-up transponder to ensure that condition is met. There are several modes of interrogation, each indicated by the difference in spacing between two transmitter pulses, known as P1 and P3. Each mode produces a different response from

2838-669: The delay of Mode S. A more detailed description of Mode S is given in the Eurocontrol publication Principles of Mode S and Interrogator Codes and the ICAO circular 174-AN/110 Secondary Surveillance Radar Mode S Advisory Circular . The 16 million permutations of the 24-bit aircraft address codes have been allocated in blocks to individual states and the assignment is given in ICAO Annex 10, Volume III, Chapter 9. A mode S interrogation comprises two 0.8 μs wide pulses, which are interpreted by

2904-594: The direct exchange of data between aircraft for collision avoidance. Most SSR systems rely on Mode C transponders, which report the aircraft pressure altitude . The pressure altitude is independent of the pilot's altimeter setting , thus preventing false altitude transmissions if altimeter is adjusted incorrectly. Air traffic control systems recalculate reported pressure altitudes to true altitudes based on their own pressure references, if necessary. Given its primary military role of reliably identifying friends, IFF has more secure (encrypted) messages to prevent "spoofing" by

2970-402: The duration of a mode A or C reply, the most expected source of interference in the early days of Mode S. The pulses in the reply have individual monopulse angle measurements available, and in some implementations also signal strength measurements, which can indicate bits that are inconsistent with the majority of the other bits, thereby indicating possible corruption. A test is made by inverting

3036-637: The enemy, and is used on many types of military platforms including air, sea and land vehicles. The International Civil Aviation Organization (ICAO) is a specialized agency of the United Nations headquartered in Montreal, Quebec , Canada. It publishes annexes to the Convention and Annex 10 addresses Standards and Recommended Practices for Aeronautical Telecommunications. The objective is to ensure that aircraft crossing international boundaries are compatible with

3102-536: The energy is directed at the ground where it is reflected back up, and interferes with, the upward energy causing deep nulls at certain elevation angles and loss of contact with aircraft. Second, if the surrounding ground is sloping, then the reflected energy is partly offset horizontally, distorting the beam shape and the indicated bearing of the aircraft. This was particularly important in a monopulse system with its much improved bearing measurement accuracy. The deficiencies in modes A and C were recognised quite early in

3168-607: The equipment bay of the aircraft. The purpose of SSR is to improve the ability to detect and identify aircraft while automatically providing the Flight Level (pressure altitude) of an aircraft. An SSR ground station transmits interrogation pulses on 1030 MHz (continuously in Modes A, C and selectively, in Mode S) as its antenna rotates, or is electronically scanned, in space. An aircraft transponder within line-of-sight range 'listens' for

3234-405: The existing SSRs by the 1990s and its accuracy provided for a reduction of separation minima in en-route ATC from 10 nautical miles (19 km; 12 mi) to 5 nautical miles (9.3 km; 5.8 mi) MSSR resolved many of the system problems of SSR, as changes to the ground system only, were required. The existing transponders installed in aircraft were unaffected. It undoubtedly resulted in

3300-548: The ground antenna is provided with a second, mainly omni-directional, beam with a gain which exceeds that of the sidelobes but not that of the main beam. A third pulse, P2, is transmitted from this second beam 2 μs after P1. An aircraft detecting P2 stronger than P1 (therefore in the sidelobe and at the incorrect main lobe bearing), does not reply. A number of problems are described in an ICAO publication of 1983 entitled Secondary Surveillance Radar Mode S Advisory Circular . Although 4,096 different identity codes available in

3366-461: The ground as well as between them for traffic information and avoidance. The 1090 MHz frequency (paired with 1030 MHz) is also used by Mode S transponders, which ADS-B augments when operated at this frequency. The TCAS system also utilizes the 1030/1090   MHz paired frequencies. ADS-B information can also be broadcast on the L band frequency of 978 MHz. DME and TACAN systems are also in this frequency band. The Radio Regulations of

SECTION 50

#1732845166430

3432-402: The ground interrogator, their replies will overlap and the interference caused will make their detection difficult. Typically the controller will lose the longer range aircraft, just when the controller may be most interested in monitoring them closely. While an aircraft is replying to one ground interrogation it is unable to respond to another interrogation, reducing detection efficiency. For

3498-449: The replies started and where they stopped, and taking the centre of the replies as the direction of the aircraft. This is known as a sliding window process. The early system used an antenna known as a hogtrough . This has a large horizontal dimension to produce a narrow horizontal beam and a small vertical dimension to provide coverage from near the horizon to nearly overhead. There were two problems with this antenna. First, nearly half

3564-442: The reply process on receipt of pulse P3. However a Mode S transponder will abort this procedure upon the detection of pulse P4, and instead respond with a short Mode S reply containing its 24 bit address. This form of All-Call interrogation is now not much used as it will continue to obtain replies from aircraft already known and give rise to unnecessary interference. The alternative form of All-Call uses short Mode S interrogation with

3630-503: The same mode A code should not be given to two aircraft at the same time as the controller on the ground could be given the wrong callsign with which to communicate with the aircraft. The mode C reply provides height increments of 100 feet, which was initially adequate for monitoring aircraft separated by at least 1000 feet. However, as airspace became increasingly congested, it became important to monitor whether aircraft were not moving out of their assigned flight level. A slight change of

3696-616: The satellites. Iridium Communications 2-way messaging service Snapdragon Satellite will utilize frequencies in the L Band as well. Inmarsat and Ligado Networks (formerly LightSquared ) terminals use frequencies between 1525 and 1646.5 MHz. Thuraya satellite phones use frequencies between 1525 and 1661 MHz. NOAA cyclically broadcasts weather data from its two geosynchronous satellites on 1694.1 MHz. The aircraft L-band ranges from 960–1215   MHz. Aircraft can use Automatic dependent surveillance-broadcast (ADS-B) equipment at 1090 MHz to communicate position information to

3762-435: The standards specified in ICAO Annex 10. Both organisations frequently work together and produce common documents. ARINC (Aeronautical Radio, Incorporated) is an airline run organisation concerned with the form, fit and function of equipment carried in aircraft. Its main purpose is to ensure competition between manufacturers by specifying the size, power requirements, interfaces and performance of equipment to be located in

3828-411: The state of some or all of these bits (a 0 changed to a 1 or vice versa) and if the parity check now succeeds the changes are made permanent and the reply accepted. If it fails then a re-interrogation is required. Mode S operates on the principle that interrogations are directed to a specific aircraft using that aircraft's unique address. This results in a single reply with aircraft range determined by

3894-471: The sum beam but a zero signal in the difference beam. Away from boresight the signal in the sum beam will be less but there will be a non-zero signal in the difference beam. The angle of arrival of the signal can be determined by measuring the ratio of the signals between the sum and difference beams. The ambiguity about boresight can be resolved as there is a 180° phase change in the difference signal either side of boresight. Bearing measurements can be made on

3960-643: The system and it produced a series of ATC Reports defining all aspects of the new joint development. Added to Ullyatt's concept was the use of a more powerful 24-bit parity system using a cyclic redundancy code , which not only ensured the accuracy of the received data without the need for repetition but also allowed errors caused by an overlapping FRUIT reply to be corrected. A proposed aircraft identity code comprised 24 bits with 16 million permutations. This allowed each aircraft to be assigned its own unique address. Blocks of addresses are allocated to different countries and further allocated to particular airlines so that

4026-851: The target as soon as it appeared over the horizon and maintained a stable track for more than 300 seconds. The track quality was sufficient to enable Launch On Remote by BMD-capable naval ships. L band In Europe, the Electronic Communications Committee (ECC) of the European Conference of Postal and Telecommunications Administrations (CEPT) has harmonized part of the L band (1452–1492 MHz), allowing individual countries to adopt this spectrum for terrestrial mobile/fixed communications networks supplemental downlink (MFCN SDL). By means of carrier aggregation, an LTE-Advanced or UMTS/ HSDPA base station could use this spectrum to provide additional bandwidth for communications from

SECTION 60

#1732845166430

4092-463: The time taken to receive the reply and monopulse providing an accurate bearing measurement. In order to interrogate an aircraft its address must be known. To meet this requirement the ground interrogator also broadcasts All-Call interrogations, which are in two forms. In one form, the Mode A/C/S All-Call looks like a conventional Mode A or C interrogation at first and a transponder will start

4158-500: The use of SSR and in 1967 Ullyatt published a paper and in 1969 an expanded paper, which proposed improvements to SSR to address the problems. The essence of the proposals was new interrogation and reply formats. Aircraft identity and altitude were to be included in the one reply so collation of the two data items would not be needed. To protect against errors a simple parity system was proposed – see Secondary Surveillance Radar – Today and Tomorrow . Monopulse would be used to determine

4224-417: Was an evolution not a revolution was to still call it SSR but with a new mode letter. Mode S was the obvious choice, with the S standing for select. In 1983 ICAO issued an advisory circular describing the new system. The problem with the existing standard "hogtrough" antenna was caused by the energy radiated toward the ground, which was reflected up and interfered with the upwards directed energy. The answer

4290-429: Was historically also allowed to be carried in the 1452–1492   MHz range in some countries. WorldSpace satellite radio used to broadcast in the 1467–1492 MHz L sub-band. DVB-H , DVB-SH , and DVB-T2 can operate in the L band. T-DMB can operate in the L band. The band contains the hyperfine transition of neutral hydrogen (the hydrogen line , 1420 MHz), which is of great astronomical interest as

4356-442: Was to shape the vertical beam. This necessitated a vertical dipole array suitably fed to produce the desired shape. A five-foot vertical dimension was found to be optimum and it has become the international standard. The Mode S system was intended to operate with just a single reply from an aircraft, a system known as monopulse. The accompanying diagram shows a conventional main or "sum" beam of an SSR antenna to which has been added

#429570