Misplaced Pages

#191808

103-650: The Mini Moke is a small, front-wheel-drive utility and recreational convertible , conceived and manufactured as a lightweight military vehicle by British Motor Corporation (BMC), and subsequently marketed for civilian use under the Austin , Morris , Leyland , and Moke brands. The name "Mini Moke" combines mini with moke , an archaic term for a mule . The Moke is known for its simple, straightforward, doorless design; and for its adaptability. BMC's Cowley plant started building Mokes in January 1964, with 14,518 produced in

206-640: A Melbourne Mini specialist. In 1977 a 1275 cc Cooper S-engined Moke (sponsored by Coca-Cola ) was entered into the Singapore Airlines London-Sydney Marathon . The car was driven over 30,000 km (19,000 miles) over 30 days and finished in 35th place. Australian production of the Moke ended in 1981. As Australian Moke production wound down, manufacturing was transferred to British Leyland 's subsidiary in Portugal, which made 8,500 of

309-536: A "Californian" Moke, has an Austin Sprite / MG Midget type fuel tank fitted beneath the rear floor area to meet the American FMVSS safety requirements of the time. Standard Mokes of the same period and later Californian Mokes use the conventional tank mounted in the left sidebox. Later Portuguese Mokes have additional lockable storage space at the rear of the vehicle. The optional cloth canopy has plastic side windows and

412-511: A 1,275 cc engine and was fitted with side marker lamps and different rear lights to conform to US FMVSS standards. The fuel tank from the Austin Sprite or MG Midget was fitted beneath the rear load area, replacing the standard tank mounted in the left sidebox. The export Californian was readily recognisable by its roof and seats, trimmed in "Op-pop verve" black and white tiger-striped vinyl or "Orange Bali" vinyl, which looked rather like

515-459: A 1275 cc version of the A-Series engine . On Magnetic Island , off Australia's Queensland coast, Moke Magnetic still operate a large fleet of Australian-made Mokes for hire to tourists. The Mini Moke can still be seen around the town of Victoria , Seychelles , as it is still a popular mode of transport for tourists and can seat four people in relative comfort. In the early 1970s, a Mini Moke

618-550: A cheaper, and even more successful Trumpf Junior model, which sold over 100,000 in August 1939, and in the same year Citroën introduced the very successful Traction Avant models in France, over time selling them in the hundred thousands. Hupmobile made 2 experimental models with front-wheel drive in 1932 and 1934, but neither came into production In the late 1930s, the Cord 810/812 of

721-452: A flexibly located electronically controlled cooling fan. This configuration was pioneered by Dante Giacosa in the 1964 Autobianchi Primula and popularized with the Fiat 128 . Fiat promoted in its advertising that mechanical features consumed only 20% of the vehicle's volume and that Enzo Ferrari drove a 128 as his personal vehicle. The 1959 Mini used a substantially different arrangement with

824-456: A floor-mounted headlight dip switch , and the only colour available was "Spruce Green". In 1967, the "Mk II" Moke added a passenger-side wiper. Horn and headlight controls were moved onto the indicator stalk. These later British Mokes were also available in white. The John Player & Sons cigarette company ran a team of Mokes in autocross competitions on grass tracks through 1968. These vehicles were equipped with rollover protection and used

927-472: A front-engine mounted longitudinally, a mid-engine layout and a rear-engine layout. Experiments with front-wheel-drive cars date to the early days of the automobile. The world's first self-propelled vehicle, Nicolas-Joseph Cugnot 's 1769/1770 "fardier à vapeur" , was a front-wheel-driven three-wheeled steam-tractor. It then took at least a century for the first experiments with mobile internal combustion engines to gain traction. Sometime between 1895 and 1898

1030-451: A front-wheel-drive system for motorising horse-drawn carts. In 1899 the inventor Henry Sutton designed and built one of Australia's first cars, called The Sutton Autocar. This car may have been the first front-wheel-drive car in the world. Henry's car was reported in the English press at the time and featured in the English magazine Autocar , after which the car was named. Two prototypes of

1133-632: A fruit salad, and was briefly marketed to the " flower power " culture in the United States. The name "Californian" and the 1275 cc motor were resurrected in 1977 for Australian market Mokes with denim seat covers, more comfortable seats (which concealed the same basic frame within), spoked wheels and complex tubular bumpers (known as " roo bars "). Australian Mokes were exported to many countries and pioneered large-scale exports of Australian-made vehicles. Leyland Australia made much of these exports in its advertising. The use of Australian-made Mokes by

SECTION 10

#1732858880192

1236-550: A light industry, can create potentially harmful levels of lead or chemical wastes in soil without proper handling of solder and waste products (such as cleaning and degreasing agents used in the manufacture). The Oxford English Dictionary traces the use of the term "light industry" from 1916 onwards. Within the later stages of the Industrial Revolution, the development of light industry tended to precede that of heavy industry. This economics -related article

1339-399: A low-end 848 cc transverse inline-four engine , detuned to use low- octane fuel. They used the same suspension, gearbox and 10 inch wheels as the standard Mini. Originally, passenger seats, grab handles, heater, windscreen washer and a removable canvas top were optional equipment, installed by the owner. The base price was £ 405. The "Mk I" Mokes had a single windscreen wiper and

1442-564: A market in Macau , where it became the official transport for the local police; the Happy-Rent-a-Car company also owned 43 of the vehicles, which were made available for hire until February 2006 when they were outlawed by new car safety laws. The Macau branch of the car rental company Avis ran a fleet of Moke look-alike " CUBs " until July 2007. The CUB, although it resembled the Moke, was designed by Charles Andersen of Liverpool , England and used

1545-441: A massive increase in grip and handling over all but the most expensive cars on the market. It initially used flexing rubber instead of needle rollers at the inboard universal joints of the driveshafts but later changed to needle rollers, and GKN designed constant-velocity joint at each outboard end of the drive shafts to allow for steering movement. The Mini revived the use of front-wheel drive which had been largely abandoned since

1648-464: A more powerful transverse engine: accordingly, faster versions featured longitudinally mounted (north–south) engines. Despite these developments, however, by the end of the 1980s, almost all major European and Japanese manufacturers had converged around the Fiat-pioneered system of a transversely mounted engine with an "end-on" transmission with unequal length driveshafts. For example, Renault dropped

1751-596: A road-rail system based on a Western Australian Government Railways design which was fitted to at least two Mokes: one used by the District Engineer, Perth, and the other by the District Engineer, Northam. In 1981, Melbourne engineering firm Johns Perry developed the "Electromoke", as part of a Victorian State Government trial investigating energy conservation. Four Leyland Mokes were produced without engines or wipers, and then fitted with elevator motors and car batteries. The rear suspension had to be upgraded due to

1854-565: A transverse-mounted engine behind the front axle. This design would continue for 3 decades in Germany. Buckminster Fuller adopted rear-engine, front-wheel drive for his three Dymaxion Car prototypes. Other German car producers followed: Stoewer offered a car with front-wheel drive in 1931, Adler in 1932 and Audi in 1933. Versions of the Adler Trumpf sold five-figure numbers from 1932 to 1938, totalling over 25,600 units. In 1934, Adler added

1957-722: A transversely installed engine was the Suzuki Suzulight , which was a small "city" car, called a kei car in Japanese. In 1955, the Polish producer FSO in Warsaw introduced the front-wheel-driven Syrena of its own design. In 1959 Austin Mini was launched by the British Motor Corporation , designed by Alec Issigonis as a response to the first oil crisis, the 1956 Suez Crisis , and

2060-536: A water cooled 3.5 horsepower (2.6 kW) Aster engine. The engine was mounted on the front axle and so was rotated by the tiller steering. The name Victoria Combination described the lightweight, two-seater trailer commonly known as a Victoria, combined with the rear axle and drive mechanism from a motor tricycle that was placed in front to achieve front wheel drive. It also known as the Eureka . By 1899 Victoria Combinations were participating in motoring events such as

2163-479: Is a " manufacturing activity that uses moderate amounts of partially processed materials to produce items of relatively high value per unit weight". Compared to heavy industries, light industries require fewer raw materials , space, and power. While light industry typically causes little pollution, particularly compared to heavy industry, some light industries can cause significant pollution or risk of contamination. For example, electronics manufacturing, itself often

SECTION 20

#1732858880192

2266-497: Is held up by a thin tubular structure that can easily be removed when not needed. In later versions this was replaced with a more solid roll cage . The windscreen can easily be unbolted and removed if not needed. There are just three curved panels in the Moke, the bonnet , the firewall and the floor, each of which is only curved in one direction. This makes it relatively straightforward to reproduce and replace Moke body components without access to sophisticated machine tools. Because

2369-491: Is near the centre of the car, making the main component of its moment of inertia relatively low). Another result of this design is a lengthened chassis. Except for Citroën, after the 1930s, front-wheel drive would largely be abandoned for the following twenty years. Save the interruption of World War II , Citroën built some 3 ⁄ 4 million Traction Avants through 1957; adding their cheap 2CV people's car in 1948, and introducing an equally front-wheel driven successor for

2472-498: Is still known to exist in Pinner just outside London, England. The Moke was launched onto the British market in 1964. The British Customs and Excise department decided that the Moke should be classified as a passenger car rather than as a commercial vehicle , which meant that it attracted purchase tax , reducing sales in its intended commercial market. British-made Mokes were fitted with

2575-778: The Argentinian Forces during their occupation of the islands. The original Moke was made in Britain until 1968. Starting in 1966 the Moke was built in Australia where it was originally marketed as the Morris Mini Moke, and from 1973 as the Leyland Moke. Initially Australian Mokes had the same 10-inch wheels as British Mokes and Mini saloons but in 1968 these were replaced by 13-inch wheels with longer rear trailing arms, which made them more practical for gentle off-road or beach use than

2678-602: The Brazilian Army after being captured during the 1969 Rupununi Rebellion from Guyanese rebels, who had crossed the border into Brazil. During the Rhodesian Bush War there was an attempt by the Rhodesian Security Forces to create an Armoured Moke as an improvised fighting vehicle , which was seemingly unsuccessful. Originally prototyped using the engine , transmission and suspension parts from

2781-468: The British Motor Corporation – moved over to the industry-standard solution for the Austin Maestro in 1983, and all its subsequent front-wheel-drive models. By reducing drivetrain weight and space needs, vehicles could be made smaller and more efficient without sacrificing acceleration. Integrating the powertrain with a transverse as opposed to a longitudinal layout, along with unibody construction and

2884-592: The Cadillac lineup) back to rear-wheel drive. There were relatively few rear-wheel-drive cars marketed in North America by the early 1990s; Chrysler 's car line-up was entirely front-wheel drive by 1990. GM followed suit in 1996 where its B-body line was phased out, where its sports cars (Camaro, Firebird, Corvette) were the only RWDs marketed; by the early 2000s, the Chevrolet Corvette and Cadillac Catera were

2987-487: The Douvrin engines used in the larger Renaults (20, 21, 25 and 30) used this longitudinal "forward" layout. The Saab Saab 99 , launched in 1968, also used a longitudinal engine with a transmission underneath with helical gears. The 1966 Oldsmobile Toronado was the first U.S. front-wheel-drive car since the Cord 810 . It used a longitudinal engine placement for its V8, coupled with an unusual "split" transmission, which turned

3090-568: The Fiat 128 featured a transverse-mounted engine with unequal-length drive shafts and an innovative clutch release mechanism – an arrangement which Fiat had strategically tested on a previous production model, the Primula , from its less market-critical subsidiary, Autobianchi . Ready for production in 1964, the Primula featured a gear train offset from the differential and final drive with unequal length drive shafts . The layout enabled

3193-600: The Great Depression , by 1932 the Cord L-29 was discontinued, with just 4,400 sold. The 1929 Ruxton sold just 200 cars built that year. The first successful consumer application came in 1929. The BSA (Birmingham Small Arms Company) produced the unique front-wheel-drive BSA three-wheeler. Production continued until 1936 during which time sports and touring models were available. In 1931 the DKW F1 from Germany made its debut, with

Mini Moke - Misplaced Pages Continue

3296-490: The Israeli Army (complete with a machine-gun tripod mounted in the rear) attracted controversy and media attention. From 1975, a pickup version of the Moke was produced, with a 1.45 x 1.50 metre (55 x 59 in) drop-sided bed which protruded behind the back of the vehicle, and a cloth top over the cab area. At least two four-wheel drive Moke prototypes were manufactured by Leyland Australia in

3399-635: The Mini Cooper S 1275 cc engine. Despite the lack of success in selling the Mini Moke to the British Armed Forces, an unknown number (unlikely to have been more than a handful) of examples were apparently used by Land Forces Falkland Islands during the Falklands War and its immediate aftermath; the source of these vehicles is unclear. At least one commandeered civilian Mini Moke was also used by

3502-548: The Mini Van , the design's small wheels and low ground clearance made it unsuitable as an off-road military vehicle. The design was subsequently adapted and sold globally for general use as a low-cost, easily maintained, lightweight recreational and utility vehicle . When BMC gave up on the idea of selling the Moke to the military, in 1963 they marketed it as a civilian vehicle, targeting farmers and light commercial applications. Several prototypes were built in 1963, one of which

3605-583: The Nuffield Guppy in a failed attempt to break into that market. By 1959, BMC had working prototypes of what was codenamed "The Buckboard", later to become the Mini Moke. These prototypes were shown to the British Army as a parachute-droppable vehicle, but poor ground clearance and a low-powered engine did not meet the most basic requirements for an off-road vehicle. Only the Royal Navy showed any interest in

3708-603: The Prince Motor Company also developed a transmission-in-sump type layout for its first front wheel drive model, which after the company's takeover by Nissan , emerged as the Datsun 100A (Cherry) in 1971. In 1960 Lancia could evolve the project CemsaF11 of Antonio Fessia with the innovative Lancia Flavia for first time with motor Boxer on auxiliary frame for low centre of gravity. This scheme continued in Lancia until 1984 with

3811-454: The Taunus   P4 . The 1965 Triumph 1300 was designed for a longitudinal engine with the transmission underneath. Audi has also used a longitudinally mounted engine overhung over the front wheels since the 1970s. Audi is one of the few manufacturers which still uses this particular configuration. It allows the use of equal-length half shafts and the easy addition of all-wheel drive , but has

3914-802: The Tracta constant-velocity joint in 1926. In October 1928 a sensation at the 22nd Paris Motor Show was the Bucciali TAV-6. Six years before the appearance of the Citroën Traction Avant and more than two years before the launch of the DKW F1, the Bucciali TAV-6 featured front-wheel drive. Both German makers DKW in 1931 and Adler in 1933 bought Tracta licenses for their first front-wheel-drive cars. Imperia in Belgium and Rosengart in France manufactured

4017-526: The "Californian" Mokes in the Setúbal IMA plant between 1980 and 1984. In 1984 production was transferred to the Vendas Novas plant. Initially these Mokes were identical to late-model Australian Mokes; very soon, however, they were altered to use then-current British production Mini saloon components, including the standard-length Mini rear trailing arms and the 12–in wheels with modern low-profile tyres, which

4120-417: The "Yak". Unusual one-off custom versions of the Mini Moke have also been created inspired by the original design, including a 454 hp Maserati V-8 powered example built by Lazareth Auto-Moto  [ fr ] , and a three axle six-wheeler. The Moke gained much popularity as a beach buggy and was often rented to tourists in tropical island resorts such as Mauritius and Barbados. The car also found

4223-443: The 1930s. The transversely mounted engine combined with front-wheel drive was popularized by the 1959 Mini ; there the transmission was built into the sump of the engine, and drive was transferred to it via a set of primary gears . Another variant transmission concept was used by Simca in the 1960s keeping the engine and transmission in line, but transverse mounted and with unequal length driveshafts. This has proven itself to be

Mini Moke - Misplaced Pages Continue

4326-588: The 1948 Saab 92 . In 1946, English car company Lloyd cars produced the Lloyd 650 , a front-wheel-drive roadster. The two-stroke, two-cylinder motor was mounted transversely in the front and connected to the front wheels through a four-speed synchronised gearbox. The high price and lacklustre performance doomed its production. Only 600 units were produced from 1946 to 1950. In 1946 in Italy, Antonio Fessia created his Cemsa Caproni F11 , with 7 examples produced. His innovation

4429-643: The 1980s after French actress and model Brigitte Bardot was pictured driving a Moke with her dogs in St. Tropez , France. In 1982 the Seychelles issued a commemorative "Transportation" postage stamp featuring the Mini Moke. In 2016 the Moke was included in an exhibition titled "AL(L) Projects with Aluminum", curated by Maria Cristina Didero at the Grand-Hornu in Belgium. The show explored experimentation with aluminium in art, design, and industry. A "Panorama Mokes" event

4532-420: The 1986 Ford Taurus . By the mid-1980s, most formerly rear-wheel-drive Japanese models were front-wheel drive, and by the mid-1990s, most American brands only sold a handful of rear-wheel-drive models. The vast majority of front-wheel-drive vehicles today use a transversely mounted engine with "end-on" mounted transmission, driving the front wheels via driveshafts linked via constant velocity (CV) joints , and

4635-541: The 371 km (231 mi) Paris– St Malo race, finishing 23rd overall and second(last) in the class. In October a Victoria Combination won its class in the Paris-Rambouillet-Paris event, covering the 100-kilometre course at 26 km/h (16 mph). In 1900 it completed 240 kilometres (150 mi) non-stop at 29 km/h (18 mph). When production ceased in mid-1901, over 400 units had been sold for 3,000 Francs (circa $ 600) each. A different concept

4738-561: The Adler under the licenses using the Tracta CV joints. During the second World War, all British vehicles, U.S. Jeeps made by Ford and Dodge command cars used Tracta CV joints. Russia and Germany also used the Tracta CV joints, but without the licensing. The United States only saw a few limited production experiments like the Cord L-29 of 1929, the first American front-wheel-drive car to be offered to

4841-490: The Austrian brothers and bicycle producers Franz, Heinrich and Karl Gräf (see Gräf & Stift ) commissioned the technician Josef Kainz to build a voiturette with a one-cylinder De Dion-Bouton engine fitted in the front of the vehicle, powering the front axle . It is possibly the world's first front-wheel-drive automobile, but it never saw series production, with just one prototype made. In 1898, Latil , in France, devised

4944-655: The Autocar were built and the Austral Otis Company was going to go into business with Henry to manufacture Henry's car but the cost of the car was too prohibitive as it could not compete with the cost of imported cars. In 1898–99, the French manufacturer Société Parisienne patented their front-wheel-drive articulated vehicle concept which they manufactured as a Victoria Combination . It was variously powered by 1.75 or 2.5 horsepower (1.30 or 1.86 kW) De Dion-Bouton engine or

5047-476: The British version. There was also a widening piece welded to the wheel arches, front and rear to allow for wider tyres and rims. The solid metal seats of the British Mokes were replaced with tubular-framed "deck-chair" seats. This variant started with a 998 cc engine, which was switched mid-production to 1,098 cc. In 1976, with the advent of new anti-pollution requirements (Australian Design Rule 27A),

5150-478: The Buckboard, as a vehicle for use on the decks of aircraft carriers . Early promotional material made much of the lightness of the vehicle, showing four soldiers travelling in the Moke off-road, then picking it up by its tubular bumpers and carrying it when (inevitably) its low ground-clearance proved inadequate. In a further attempt to make a viable military vehicle, a few four-wheel drive Mokes were made. This

5253-484: The Mini Moke was developed by Chery subsidiary Sicar Engineering and MOKE International in around 2007. This Chinese-manufactured design is assembled and distributed by various small companies in France, England, and United States. While BMW-owned Mini has discussed other vehicles named after the Moke, no production has ever taken place. A concept car called the MINI Beachcomber , which draws heavily on Moke styling,

SECTION 50

#1732858880192

5356-510: The Moke's A-Series engine , manual gearbox and suspension are identical to those of a standard Mini (which was still in production up to October 2000), most spare parts are still readily available. The Moke has no chassis , so the wheels, brake assemblies and suspension are attached to front and rear subframes bolted straight onto the monocoque shell, just as with a standard Mini. Mokes tend to require much structural maintenance if they are to stay in good running order. The true Mini Moke

5459-802: The Sydney motoring industry and invented a system that used a "spherical radial gear" that was fitted to what is believed to have been a Standard (built by the Standard Motor Company of England). A photo of the car with the system fitted is available from the Mitchell Library and the patent design drawing is still available from the Australian Patent Office. reference; "Gilltraps Australian Cars from 1879 – A history of cars built in Australia" (authors Gilltrap T and M) ISBN 0 85558 936 1 (Golden Press Pty Ltd) The next application of front-wheel drive

5562-514: The TA, the DS model, in 1955. Front-wheel drive continued with the 1948 Citroën 2CV , where the air-cooled lightweight aluminium flat twin engine was mounted ahead of the front wheels, but used Hooke type universal joint driveshaft joints, and 1955 Citroën DS , featuring the mid-engine layout. Panhard of France, DKW of Germany and Saab of Sweden offered exclusively front-wheel-drive cars, starting with

5665-564: The UK between 1964 and 1968; 26,000 were manufactured in Australia between 1966 and 1981; and 10,000 in Portugal between 1980 and 1993 when, after a nearly 30-year run, production ended. In 2013, in a joint venture with Jaguar Land Rover , Chinese automaker Chery Automobile started production in China of a new car called Moke . This evocation of the design is assembled and distributed by a number of companies in several countries including England, France, and

5768-537: The US, although ownership of the Moke trademark is disputed. The original Moke was designed by Sir Alec Issigonis and John Sheppard . When Issigonis designed the Mini , he planned another vehicle to share the Mini's mechanical parts, but with a more rugged body shell. This was an attempt to take a portion of the military vehicle business from Land Rover . Issigonis had previously designed

5871-545: The United States managed a bit better than its predecessor one decade earlier. These vehicles featured a layout that places the engine behind the transmission, running "backwards," (save for the Cord, which drove the transmission from the front of the engine). The basic front-wheel-drive layout provides sharp turning, and better weight distribution creates "positive handling characteristics" due to its low polar inertia and relatively favourable weight distribution. (The heaviest component

5974-539: The United States, and even competed in the 1906 Vanderbilt Cup and the French Grand Prix . In 1912 he began manufacturing a line of wheeled fire engine tractors which used his front-wheel-drive system, but due to lack of sales this venture failed. In Australia in 1915 G.J. Hoskins designed and was granted a patent for his front-wheel-drive system. Based in Burwood NSW Mr Hoskins was a prominent member of

6077-425: The battery weight. The vehicles were tested by Australia Post , the State Electricity Commission of Victoria and the Electricity Commission of New South Wales . A change of government , high cost, poor performance, and the demise of the Leyland factory meant the project went no further. The one remaining Electromoke is on static display at the Museum of Vehicle Evolution , Shepparton . A new design inspired by

6180-429: The boom in bubble cars that followed. It was the first production front-wheel-drive car with a watercooled inline four-cylinder engine mounted transversely. This allowed eighty percent of the floor plan for the use of passengers and luggage. The majority of modern cars use this configuration. Its progressive rate rubber sprung independent suspension, low centre of gravity, and wheel at each corner with radial tyres, gave

6283-442: The disadvantage that it makes it difficult to achieve 50/50 weight distribution (although they remedy this in four-wheel-drive models by mounting the gearbox at the rear of the transaxle ). The Subaru 1000 appeared in 1966 using front-wheel drive mated to a flat-4 engine, with the driveshafts of equal length extending from the transmission, which addressed some of the issues of the powertrain being somewhat complex and unbalanced in

SECTION 60

#1732858880192

6386-505: The end production of Lancia Gamma and successfully cloned until today by Subaru . Lancia, however also made front-wheel drive its flagship even in sport cars as the winner of the Rally, Lancia Fulvia , and then with large-scale models with excellent road qualities and performances including Lancia Beta , Lancia Delta , Lancia Thema including the powerful Lancia Thema 8.32 with engine Ferrari and all subsequent models. Ford introduced front-wheel drive to its European customers in 1962 with

6489-439: The engine and gearbox to be located side by side without sharing lubricating fluid while orienting the cooling fan toward fresh air flow. By using the Primula as a test-bed, Fiat was able to sufficiently resolve the layout's disadvantages, including uneven side-to-side power transmission, uneven tire wear and potential torque steer , the tendency for the power of the engine alone to steer the car under heavy acceleration. The problem

6592-419: The engine compartment – the Alfa Romeo Alfasud (and its replacement, the 1983 Alfa 33 as well as the Alfa 145/146 up to the late 1990s) also used the same layout. Honda also introduced several small front-wheel drive vehicles, with the N360 and N600 , the Z360 and Z600 in 1967, the Honda 1300 in 1969, followed by the Honda Civic in 1972 and the Honda Accord in 1976. Also in the 1970s and 1980s,

6695-466: The engine drives the front wheels only. Most modern front-wheel-drive vehicles feature a transverse engine , rather than the conventional longitudinal engine arrangement generally found in rear-wheel-drive and four-wheel-drive vehicles. By far the most common layout for a front-wheel-drive car is with the engine and transmission at the front of the car, mounted transversely. Other layouts of front-wheel drive that have been occasionally produced are

6798-412: The engine driving the front wheels through an offset final drive and unequal-length driveshafts, combined with MacPherson struts and an independently located radiator – subsequently became common with competitors and arguably an industry standard. The Corporate Average Fuel Economy standard drove a mass changeover of cars in the U.S. to front-wheel drive. The change began in 1978, with

6901-517: The engine power 180 degrees. Power then went to a differential mounted to the transmission case, from which half-shafts took it to the wheels. The driveline was set fairly at centre-point of the wheels for better weight distribution, though this raised the engine, requiring lowered intake systems. Little known outside of Italy, the Primula is today primarily known for innovating the modern economy-car layout. – Hemmings Motor News , August 2011 Front-wheel-drive layout had been highly impacted by

7004-460: The engine. The layout often required the engine be removed to service the clutch. This Active Tourer MPV wants to be more stable than a BMW M3, and using the Dante Giacosa-pattern front-wheel-drive layout compacts the mechanicals and saves space for people in the reduced overall length of what will surely become a production 1-series tall-sedan crossover. – Robert Cumberford , Automobile Magazine , March 2013 As engineered by Dante Giacosa ,

7107-449: The films Emmanuelle and Carry on Camping . In total, the Moke has made cameo appearances in over 70 films. The Beatles and the Beach Boys were also photographed behind the wheel of a Moke. Despite these cultural references and celebrity associations, only about a tenth of the 14,500 British produced Mokes were sold in the United Kingdom, although Mokes continued to be made in Britain until 1968. The Moke met with renewed success in

7210-442: The front and rear wheels and includes solid extensions running from the back of the car to the front. These are connected by the floor pan, the firewall and a sturdy lateral torque box that runs under the front seats and stiffens the body in torsion. The left-hand pontoon contains the fuel tank ; the right-hand has a compartment for the battery and a small lockable storage area. The 1972 "Moke, Special Export", commonly referred to as

7313-402: The front axles of almost every four-wheel or all-wheel drive vehicle. Neither automobile was particularly successful in the open market. In spite of the Cord's hallmark innovation, using CV joints, and being competitively priced against contemporaneous alternatives, the buyers demographic were expecting more than the car's 80 mph (130 km/h) top speed, and combined with the effect of

7416-536: The introduction of the first American-built transverse-engined cars, the Plymouth Horizon and Dodge Omni (based on the European designed Simca Horizon ), followed by the 1980 Chevrolet Citation and numerous other vehicles. Meanwhile, European car makers, that had moved to front-wheel drive decades before, began to homogenize their engine arrangement only in this decade, leaving Saab , Audi (and Volkswagen ) as

7519-565: The island, and by cannibalising the three for spares, the island's sole vehicle remained running until at least 1988. The Moke was identified as an ideal conversion for use in railway service. Two differing modifications were made: one using backing plates and spacers, the other a more conventional road-rail system. Tasmanian Government Railways ran a fleet, estimated at 16, of hard-topped Mokes for inspection and maintenance service on its narrow-gauge network. These Mokes had slightly modified suspension, and used spacers and backing plates so that

7622-476: The late 1970s, but unlike the British version, these used just one engine. Leyland were planning to market this version, but Moke production in Australia ended in 1981 and all that remains of the project is one of the prototypes which is now owned by an enthusiast in Western Australia and a modified differential crownwheel with gearteeth cut in the side to drive the rear tailshaft, in the personal collection of

7725-455: The locally manufactured 1,098 cc motor was replaced by an imported version of the 998 cc motor with an air pump and exhaust gas recirculation , which had been developed to meet UK (US?) anti-pollution requirements. For a brief period around 1971, Leyland Australia produced a variant referred to in Leyland literature as "Moke, special export", but commonly called a "Californian", which had

7828-527: The model on which almost all modern FWD vehicles are now based. Peugeot and Renault on their jointly developed small car engine of the 1970s where the 4-cylinder block was canted over to reduce the overall height of the engine with the transmission mounted on the side of the crankcase in what became popularly known as the "suitcase" arrangement ( PSA X engine ). The tendency of this layout to generate unwanted transmission "whine" has seen it fall out of favour. Also, clutch changes required engine removal. In Japan,

7931-641: The only RWD cars offered by General Motors until the introduction of the Sigma platform . After the phaseout of the Ford Panther platform (except for the Mustang), Ford automobiles (including the Transit Connect van) manufactured for the 2012 model year to present are front-wheel drive; its D3 platform (based on a Volvo platform) has optional all-wheel drive. Light industry One definition states that light industry

8034-595: The only manufacturers offering a front-drive longitudinal engine layout. Years before this was the most common layout in Europe, with examples like Citroën DS , Renault 12 , Renault 5 , Renault 25 (a Chrysler LH ancestor) Alfa Romeo 33 , Volkswagen Passat , etc. This transition can be exemplified in the Renault 21 that was offered with disparate engine configurations. The 1.7-litre version featured an "east–west" (transversely) mounted engine, but Renault had no gearbox suitable for

8137-925: The pre-war DKW F8 and F9 reappeared as the IFA F8 and IFA F9 in 1949, followed by the AWZ P70 in 1955, the Wartburg 311 in 1956 and the Trabant in 1958, all with front-wheel drive. The P70 and Trabant had Duroplast bodies, and the Trabant had both a monocoque body and a transversely mounted engine, a modern design in some ways. In 1950 West German makers also reintroduced front-wheel-drive cars: DKW had lost its production facilities in Eisenach (now in DDR) and reestablished itself in Ingolstadt. A version of

8240-555: The pre-war F9 was introduced as the DKW F89. Borgward introduced 2 new makes with front-wheel drive, the Goliath and the Lloyd in 1950. Gutbrod also came with a car in 1950; the Superior, but withdrew the car in 1954 and concentrated on other products. This car is best remembered for its Bosch fuel-injection . In 1955, one of the first Japanese manufacturers to utilize front-wheel drive with

8343-711: The public, and a few months later the Ruxton automobile . The Cord L-29's drive system was again inspired by racing, copying from the Indianapolis 500 -dominating racers, using the same de Dion layout and inboard brakes. Moreover, the Auburn (Indiana) built Cord was the first ever front-wheel drive production car to use constant-velocity joints . These very specific components allow motive power to be delivered to steered wheels more seamlessly than universal joints , and have become common on almost every front-wheel-drive car, including on

8446-450: The reimagined Moke in China. The 2020 MOKE has a 1,083 cc four-cylinder fuel injected petrol engine with either manual or automatic transmission and was also made in France. An electric version based on this design has been manufactured in Britain since 2021. The Moke brand was acquired by EV Technology Group in 2022. The Moke's construction is simple. The body mainly consists of two box-section "pontoons" or "sideboxes" running between

8549-594: The saloon had acquired during the Moke's absence from Europe. In April 1990, British Leyland (by then called Rover Group ) sold the "Moke" name to Cagiva , a motorcycle manufacturer in Bologna , Italy. Production continued in Portugal under Cagiva's auspices until 1993, when Cagiva transferred the tooling to their own factory in Varese, Italy with the intention of restarting production there in 1995 — which they never did, although some unfinished cars were assembled in Italy. Cagiva

8652-469: The same transverse-mounted, forward-motor layout as modern front-wheel-drive automobiles. It even resembled the smaller version of its popular Alfa Romeo Giulia . However, due to the financial difficulties in post-war Italy, the 33 never saw production. Had Alfa-Romeo succeed in producing 33, it would have preceded the Mini as the first "modern" European front-wheel-drive compact car. The German car industry resumed from WW2 in 1949/1950. In East Germany (DDR),

8755-465: The success of small, inexpensive cars, especially the British Mini . As engineered by Alec Issigonis , the compact arrangement located the transmission and engine sharing a single oil sump – despite disparate lubricating requirements – and had the engine's radiator mounted to the side of the engine, away from the flow of fresh air and drawing heated rather than cool air over

8858-563: The total production run of Mokes and Moke derivatives to about 50,000. In 2012 MOKE International teamed up with designer Michael Young , Chery Automobile , and Sicar Engineering to design a new version of the Moke, styled MOKE, with the intention of releasing the car in Thailand, Australia, the Caribbean, the Seychelles and Mauritius, and Egypt by 2016. In 2013, Chery Automobile began manufacturing

8961-468: The transmission in the sump, and the cooling fan drawing hot air from its side-facing location. Volvo Cars has switched its entire lineup after the 900 series to front-wheel drive. Swedish engineers at the company have said that transversely mounted engines allow for more crumple zone area in a head-on collision. American auto manufacturers are now shifting larger models (such as the Chrysler 300 and most of

9064-576: The transmission-in-sump " Suitcase " engine that it had co-developed with Peugeot in the 1970s for its compact models, starting with the Renault 9 in 1982. Peugeot-Citroen themselves also moved over to the end-on gearbox solution when it phased out the Suitcase unit in favour of the TU-series engine in 1986. Nissan also abandoned the transmission-in-sump concept for its N12-series Cherry/Pulsar in 1982. Perhaps symbolically, British Leyland themselves, heirs to

9167-473: The use of constant velocity jointed drive axles, along with front wheel drive has evolved into the modern-day mass-market automobile. Some suggest that the introduction of the modern Volkswagen Golf in 1974, from a traditional U.S. competitor, and the introduction of the 1973 Honda Civic , and the 1976 Honda Accord served as a wake-up call for the "Big Three" (only Chrysler already produced front-wheel-drive vehicles in their operations outside North America). GM

9270-487: The wheels sat on and tracked on 3 ft 6 in ( 1,067 mm ) gauge track. Similarly, the Federal Government, through either its Commonwealth Railways or Australian National Railways Commission , ran at least two similarly set up Mokes on its Central Australia Railway . At least one of these Mokes also operated on the isolated Eyre Peninsula network . George E Moss and Co (trading as GEMCO) developed

9373-491: Was accomplished by the addition of a second engine and transmission at the back of the vehicle with linked clutches and gear shifters , which did nothing for the ground-clearance problems. This vehicle was called "The Twini" and was shown to the US Army —again with no success. The added mechanical complexity and lack of interest by the military discouraged development beyond the prototype stage. Three of these vehicles were used by

9476-493: Was even later with the 1979 Vauxhall Astra / Opel Kadett . Captive imports were the US car makers initial response to the increased demand for economy cars . The popularity of front-wheel drive began to gain momentum, with the 1981 Ford Escort , the 1982 Nissan Sentra , and the 1983 Toyota Corolla . Front-wheel drive became the norm for mid-sized cars starting with the 1982 Chevrolet Celebrity , 1982 Toyota Camry , 1983 Dodge 600 , 1985 Nissan Maxima , 1986 Honda Legend , and

9579-640: Was held In October 2016 which brought together a group of Mini Mokes alongside their "tin top" cousins the "Classic Minis" which met at Bathurst, New South Wales, Australia. Alongside the Minis, the MOKE also celebrated 50 years since production in Australia and participated in a four-day event with everyone arriving on cue to the 2016 Supercheap Auto Bathurst 1000 . In 2021 the Moke that featured in The Prisoner sold at auction for £69,750. The last petrol powered Moke revival

9682-477: Was held at the Indianapolis Motor Speedway on Saturday, 30 May 1925. However, the idea of front-wheel drive languished outside the motor racing arena as few manufacturers attempted the same for production automobiles. Alvis Cars did introduce a commercial model of the front-wheel drive 12/50 racer in 1928, but it was not a success. In France, Jean-Albert Grégoire and Pierre Fenaille developed

9785-481: Was largely solved by making the shorter driveshaft solid, and the longer one hollow, to ensure both shafts experienced elastic twist which was roughly the same. After the 128, Fiat further demonstrated the layout's flexibility, re-configurating the 128 drive train as a mid-engined layout for the Fiat X1/9 . The compact, efficient Giacosa layout – a transversely-mounted engine with transmission mounted beside

9888-464: Was made to pay a considerably higher price for the Rover-made parts than had BL's Portuguese subsidiary, and the enterprise never made financial sense. The Cagiva-built Mokes have a new top with C-shaped openings, as well as plastic curve handles at the rear longitudinal elements of the rollover bar. Since Cagiva did not own the "Mini" name, the 2071 cars they built were sold simply as "Mokes". This brought

9991-463: Was never available as a kit car , however as the basic Mini parts were easily available, many companies have assembled and marketed look-alikes, hybrid copies, and custom versions of the vehicle with names such as the Andersen "Mini-Cub", "Comet", Del Tech "Nomad", "Gecko", "Hobo", " Hustler ", "Jimini", "Mini-Scout", "MPV" (a 6-wheeler), "Mule", "Navajo", "Ranger", " Mini Scamp ", "Stimson", "Warrior", and

10094-480: Was sold at the Blenheim Palace Ball auction in 2022. The proceeds of the event were donated to the charity Starlight UK . In 2024, a red Mini Moke is seen being driven by the principle character Mackenzie Clarke (played by Anna Samson ) in the series Return to Paradise . Front-wheel-drive Front-wheel drive ( FWD ) is a form of engine and transmission layout used in motor vehicles, in which

10197-638: Was the Lohner–Porsche of 1897 with an electric motor in each front wheel, produced by Lohner-Werke in Vienna. It was developed by Ferdinand Porsche in 1897 based on a concept developed by American inventor Wellington Adams . Porsche also raced it in 1897. J. Walter Christie of the United States patented a design for a front-wheel-drive car, the first prototype of which he built in 1904. He promoted and demonstrated several such vehicles, notably with transversely mounted engines, by racing at various speedways in

10300-418: Was the first motor vehicle to be driven on Pitcairn Island and thereby became the most remote vehicle on Earth. It was chosen because it was the only off-road vehicle that could be lifted by the island's only crane—there being no dock or airstrip at Pitcairn. However, the rough terrain and heavy rainfall proved too much for the Moke and it soon broke down. Eventually, a second and later a third Moke were sent to

10403-643: Was the supercharged Alvis 12/50 racing car designed by George Thomas Smith-Clarke and William M. Dunn of Alvis Cars of the United Kingdom. This vehicle was entered in the 1925 Kop Hill Climb in Princes Risborough in Buckinghamshire on 28 March 1925. Harry Arminius Miller of Menomonie, Wisconsin designed the Miller 122 front-wheel drive race-car that was entered in the 1925 Indianapolis 500 , which

10506-401: Was to create the happy combination of a low centre of gravity boxer engine (flat four) with a special frame. Due to post-war financial problems Cemsa could not continue production, but the project was resumed when taken on by Lancia in the 50s. In 1954, Alfa-Romeo had experimented with its first front-wheel-drive compact car named "33" (not related to the sports car similarly named "33"). It had

10609-649: Was used to build interest for the upcoming Mini Countryman . The Moke attracted attention via media exposure, including the 1965 John Boorman film Catch Us If You Can (in which a Moke is driven by the Dave Clark Five ), many appearances in the television series The Prisoner starring Patrick McGoohan (1967–68), as well as in popular songs such as the English rock group Traffic 's recording of " Berkshire Poppies ". The Moke also features in four James Bond movies: You Only Live Twice , Live and Let Die , The Spy Who Loved Me , and Moonraker , as well as

#191808