Misplaced Pages

#59940

69-514: The M2 half-track car was an armored half-track produced by the United States during World War II . Its design drew upon half-tracks imported from France in the 1930s, employing standard components supplied by U.S. truck manufacturers to speed production and reduce costs. The concept was designed, and the pilot models manufactured by the Firestone Tire and Rubber Company (before the prototype

138-640: A Director of Mechanisation. The Director of Mechanisation led the Mechanisation Board who represented the various user arms combined to lead the production of tanks and vehicles. Before the war, the Master General of the Ordnance post (and its holder -General Hugh Elles ) had been replaced by Leslie Hore-Belisha , the Secretary of State for War , and Director General of Munitions Production. In 1939 this post

207-574: A Tank Mission was established and sent to the US to exchange information on AFV design, comprising Lucas, Robotham, George Usher (Controller of Tank Production), Weeks and Richardson. The greater manufacturing capacity in the USA resulted in US-made tanks providing the bulk of forces, while US designers, newer to the business of tank design, benefited from British experience. The Tank Board stayed in similar configuration for

276-664: A better armoured vehicle the Churchill VII. This improved design was first known as A22F then renumbered as A42. Secondly by a descriptive name, as with other equipment in the British Army – e.g. "Tank, Infantry, Mark II". This reflected the type and model of tank, i.e. "Tank, Infantry, Mark II" is a different tank to "Tank, Infantry, Mark III". The scheme was introduced during the First World War but not always applied to earlier designs. The descriptive name could also be modified by

345-590: A further upgrade to the High Velocity gun that previously couldn't be fitted to Cromwell, now made capable of firing 17pounder (nominally 77mm) projectiles. It replaced the need for Challenger. Specification and design of the A41 Centurion began in 1943, also initially mounting the 17-pounder. It entered service just as the war came to an end. At the start of the war, the Matilda I was the current infantry tank, while

414-618: A number of faults, and the vehicle was expected to be replaced with the T14 assault tank ordered from (and designed in collaboration with) the US in 1942. Parallel development of the A33 Excelsior heavy assault tank was proposed following the Dieppe raid . Both were cancelled when faults with the Churchill were rectified, and the vehicle proved capable of meeting battlefield requirements. A43 Black Prince

483-399: A series of different turrets, some of which were improvements, while others were different methods of manufacturing. Valentine was fitted with both petrol and diesel engines determined by availability and manufacturer. Cromwell and Churchill tanks mounted the 75 mm gun and 95 mm howitzer for different purposes. All were given different numbers to identify the different variants. The Matilda I

552-477: A single specification and hence more than one tank produced to the same specification. If the vehicle was privately developed it may not have a General Staff number at all. A significant redesign could lead to the issue of a new specification number without a new Mark, for instance the Infantry Tank Mark IV Churchill – originally built to specification A22 in 1940 – underwent a redesign leading to

621-628: A total of 8,345 vehicles were produced between 1940 and 1944. Other Wehrmacht models were: Larger German half-track tractors were used to tow anti-tank and field artillery pieces. The largest of these were also used by mechanical engineers to retrieve bogged down vehicles or perform repairs such as engine maintenance. Maultier half-tracks used to transport supplies to forward units were essentially civilian trucks which had had their rear axles replaced by Panzer I or Panzer II running gear. A replacement half-track design introduced later in World War II,

690-523: A tracked vehicle, but failed. Holt bought the patents related to the "chain track" track-type tractor from Richard Hornsby & Sons in 1914 for £4,000. Unlike the Holt tractor, which had a steerable tiller wheel in front of the tracks, the Hornsby crawler was steered by controlling power to each track. When World War I broke out, with the problem of trench warfare and the difficulty of transporting supplies to

759-784: The BA-30 , but found them expensive and unreliable. Although not a feature on American World War II vehicles, steering could be assisted by track braking, controlled by the steering wheel. In the US, 43,000 halftracks were produced by three primary manufacturers, the largest being the White Motor Company , the original designer, with a total of 15,414 accepted by the War Department. The other manufacturers, Autocar and Diamond T , built 12,168 and 12,421, respectively. These designs were produced under license in Canada, and were widely supplied under

SECTION 10

#1732851056060

828-553: The Dunkirk evacuations . Work on the Churchill infantry tank had begun before the war began, with specification A20. This developed into the A22 specification when France was lost, and frontline requirements changed. A22 had rapid development, with design completed around one month after the specification was released. Tanks began rolling off the production line a year later. The rushed design left

897-606: The Kleines Kettenkraftrad HK 101 or Kettenkrad for short – Ketten meaning tracks, and krad being the military abbreviation of the German word Kraftrad , the administrative German term for motorcycle), to pull small artillery guns, for ammunition haulage, general transport and as a ground towing vehicle for the Messerschmitt Me 262 jet fighter. Built by NSU Motorenwerke AG Neckarsulm and Stoewer Werke Stettin ,

966-750: The Lend Lease program, with 5,000 supplied to the USSR alone. The fourth manufacturer of American-made half-tracks was the International Motor Truck Corporation division of International Harvester . IH built approximately 12,853 half-tracks, which were shipped to Europe for use by British and French troops. In 1942, they produced 152 M5 units and 5 M14 units at the Springfield Works; in 1943 they produced 2,026 M9 units, 1,407 M0A1 units, 4,473 M5 units, 1,600 M14 units, and 400 M17 units, all at

1035-662: The Matilda II was in production based on the A12 specification of 1936 and the A12E1 prototype of 1938. This entered service early in 1940. It was supplemented by the Valentine tank , based on Cruiser designs and the Matilda I. The Valentine was a private venture. It did not have a specification number. Design approval was granted just as war broke out in 1939. It was rushed into service to replace losses in

1104-550: The Second World War . The United Kingdom produced 27,528 tanks and self-propelled guns from July 1939 to May 1945, as well as 26,191 armoured cars and 69,071 armoured personnel carriers (mostly the Universal Carrier ). British tank design focused on pre-war requirements for light, cruiser, and infantry tanks created experimentally by J.F.C. Fuller , Percy Hobart and B.H. Liddell-Hart . Their experiments and doctrine led

1173-606: The Soviet Union , Kégresse returned to his native France, where the system was used on Citroën cars between 1921 and 1937 for off-road and military vehicles. The concept originated with the hauling of logs in the northeastern US, with the Lombard Steam Log Hauler built by Alvin Lombard of Waterville, Maine , from 1899 to 1917. The vehicle resembled a railway steam locomotive, with sled steering (or wheels) in front and at

1242-574: The United States Army and United States Marines , continued after the First World War to develop armored cars and added tracks for the M2 half-track car and M3 half-track . There were many civilian half-track experiments in the 1920s and 1930s. The Citroën company sponsored several scientific expeditions crossing deserts in North Africa and Central Asia, using their autochenilles . After World War I,

1311-420: The 1943-introduced Schwerer Wehrmachtschlepper , was meant to replace the 3-tonne and 5-tonne capacity models – only some 825 examples were built before the war's end. A common feature of virtually all German World War II half-tracks was the so-called Schachtellaufwerk overlapped/interleaved roadwheel arrangement with a "slack track" system possessing no return rollers under the return run of track, used from

1380-848: The 1978-79 Nicaraguan Revolution . The Argentine Army retired its last upgraded M9 in 2006 and donated them to Bolivia. In 1947, the Finnish heavy vehicle producer Vanajan Autotehdas bought 425 M2 half-track vehicles from the Western Allied surplus stocks located in France and Germany. The vehicles were delivered without armor. Some 359 units were converted into field and forest clearing vehicles, some were scrapped for parts and 60 units were equipped with conventional rear axles and converted into 4×4 or 4×2 trucks. They were badged as Vanaja VaWh . The last units were sold in 1952. Background: British armoured fighting vehicle production during World War II , Tanks in

1449-621: The 37mm gun had been underwhelming, and the M2 Medium was turned down. The next version, M3 Medium (later known as Lee/Grant in British service) was already part way through design and had a turret too small for the larger 75mm gun. To meet British requirements, the design was modified to add a larger gun in a side sponson . British needs were then added to the M4 Medium (Sherman) requirements. Both tanks were produced in greater numbers, and Sherman gained

SECTION 20

#1732851056060

1518-527: The A27M Cromwell used the more powerful Rolls-Royce Meteor . When US tanks entered British use, the Cromwell and Centaur design requirement was changed to move from the 6-pounder to 75mm for commonality of ammunition. This reduced the armour penetration. An uprated 75mm High Velocity gun was designed to overcome the issue, but proved too large for the new tanks, placing a renewed focus on the 17-pounder. Cromwell

1587-495: The British Army Half-track The main advantage of half-tracks over wheeled vehicles is that the tracks reduce the pressure on any given area of the ground by spreading the vehicle's weight over a larger area, which gives it greater mobility over soft terrain like mud and snow, while they do not require the complex steering mechanisms of fully tracked vehicles, relying instead on their front wheels to direct

1656-599: The Chief Engineer of Rolls-Royce's Chassis Division who had been the main proponent of the Cromwell and Meteor works was seconded into the Ministry of Supply to become the Chief Engineer of Tank Design. Robotham started a fresh look at tank design, starting with welded hulls and final delivery of the 6-pounder anti-tank gun . The role was outside of the usual hierarchy, allowing Robotham to co-ordinate efforts between DTD and industry while adding some much needed technical advice to

1725-579: The Cruiser and Infantry tanks. Neither entered production. Light tanks had mostly been discounted by the start of the war in all roles except airborne (generally replaced with the Carrier). As a result, the majority of British wartime tank production focused on the Cruiser and Infantry types. Prior to 1936, tank design and production came under the responsibility of the Master General of the Ordnance , who appointed

1794-597: The Crusader was modified to take the 6-pounder gun. In parallel, Britain started to look at US made tanks to meet the Cruiser requirement, initially requesting the US to build Crusaders. This request was denied as the US tank programme was focussed on producing their own tanks of similar class, the M2 Medium . This fitted the same 37mm weapon as the M3 Light Tank (Stuart) which was already in British service. British experience of

1863-763: The Directorate of Tank Design returned to designing its own tanks, creating the Centurion tank ready for delivery in late 1945. At the start of the war, the Cruiser Mk IV was the current model of Cruiser tank based on a second version of the A13 specification. The Crusader and Covenanter were parallel designs for a cheaper cruiser tank than the A16 design proposed to replace the Cruiser Mark IV. Both designs were ordered in 1939 prior to

1932-575: The Germans with their armored Demag -designed Sd.Kfz. 250s and Hanomag -designed Sd.Kfz. 251s ; and by the Americans with their M2s and M3s . Half-tracks were widely used as mortar carriers , self-propelled anti-aircraft guns , self-propelled anti-tank guns , armored fighting vehicles and in other tasks. The Germans used a small 2 seater 1/2-ton class half-track "motorcycle", the Sd.Kfz. 2 (better known as

2001-608: The Hercules 160AX engines used by the other manufacturers; used IHC Model 1856 4-speed transmissions instead of the Spicer 4-speed transmissions used by the other manufacturers; had IHC Model FOK-1370 front drive axles instead of the Timken front axles used by their competitors; used IHC Model RHT-1590 axles in the rear instead of the Timken axles used by their competitors; and were constructed with fully welded armor with rounded rear corners instead of

2070-534: The Springfield Works; in 1944 they produced 1,100 M5A1 units and 1,100 M17 units also at the Springfield Works; and in 1945 they built 589 M5A1 and 1 M5A3 units at Springfield Works. The IHC half-tracks differed visibly from the White, Diamond T, and AutoCar units in several ways. The IHC units had flat front fenders instead of fenders with compound curves; used the International Red Diamond 450 engines instead of

2139-684: The Tank Board and General Staff. In 1942, the Chairman of the AFV Division ( Viscount Weir ) was appointed as the Chief Executive for Tank Design, and became the chairman of the Tank Board. The Tank Board was reorganised to provide equal representation from Ministry of Supply and the War Office, consisting of: Following the fall of France, US contribution to the war effort became crucial. In early 1942

M2 half-track car - Misplaced Pages Continue

2208-456: The Tank Board to investigate and resolve tank design and production problems. The Director General of Tanks and Transport was replaced (now Geoffrey Burton) and now led a Director of Armoured Fighting Vehicles (representing the War Office), and separate Director of Design (A.A.M. Durant) and Director of Production. Under Durant's new Directorate of Tank Design a new Department of Tank Design (DTD)

2277-503: The Tank Board was further re-organized to include a Director of Artillery and representatives from the General Staff . As 1941 progressed, with development of greater horsepower tank engines, greater stresses were placed on many of the tank components. Rolls-Royce, aided by Leyland and Vauxhall, started to become more involved in improving the design of a greater array of tank components, increasing performance and reliability. This saw

2346-454: The Timken rear bogie assembly from a T9 half-track truck and added it to an M3 scout car , creating the T7 half-track car. This vehicle was significantly underpowered. When a further requirement came down from US Army artillery units in 1939 for a prime mover to be used as an artillery tractor , a vehicle with an uprated engine was developed, which was designated the half-track scout car T14. By 1940,

2415-584: The U.S. Army, and around the Pacific by the Marines . About 800 M2 and M9 half-tracks were sent to the Soviet Union . Many remaining vehicles initially destined for Lend-Lease were transferred to other U.S. allies, primarily in South America. These vehicles often received a number of upgrades designed at extending service life. The Nicaraguan National Guard received 10 M2s in 1942, which saw heavy action during

2484-538: The US military wanted to develop a semi-tracked personnel carrier vehicle, so it looked at these civilian half-tracks. In the late 1920s the US Army purchased several Citroën-Kégresse vehicles for evaluation followed by a licence to produce them. This resulted in the Army Ordnance Department building a prototype in 1939. In September 1940 it went into production with the military M2 and M3 half-track versions. With

2553-547: The United States, but also by its allies. A few legacy units were used in the Nicaraguan Revolution . The concept of a half-track vehicle had been evaluated by the US Army Ordnance Department using Citroën-Kégresse vehicles. The Cavalry branch of the US Army found that their wheeled armored scout cars had trouble in wet terrain due to their high ground pressure. In 1938, the White Motor Company took

2622-646: The bolted armor with square corners used by the other three manufacturers. In August 1944, Allied forces liberated Paris . The first vehicle to enter the city was an M3 named "España Cañí" and driven by Spanish soldiers fighting under the French tricolor. There followed several days of parades in late August. One parade of 25 August 1944 was down the Champs-Élysées , with Charles de Gaulle leading throngs of Parisians, and French soldiers driving IH half-tracks. Half-tracks were used extensively in World War II, especially by

2691-570: The early wars of the Arab–Israeli conflict . Half-tracks continued in use by the Israeli Army where they were deemed to outperform fully tracked and fully wheeled vehicles for non-combat payload tasks such as carrying telecommunications equipment. As of March 2008, 600 half-tracks were still officially listed as on active duty. Many Second World War half-tracks were sold off to civilian users either as surplus stock or later due to obsolescence when

2760-471: The first payload-carrying half-track. By 1909 this was replaced by a smaller machine with two wheels at the front and a single track behind, since rural wooden bridges presented problems. Stability issues, together with a dispute between Linn and Lombard, led Linn to create the Linn Manufacturing Company, builder of the Linn tractor , for building and putting onto the market his own improved civilian half-track–style machines. Lombard attempted to follow but, for

2829-408: The focus of the design team. At this stage the DTD began to take on a co-ordinating role. It produced specifications and commissioned pilot models for each tank to assess different companies. One competing company would then be appointed the design lead for further development of that tank. This followed a similar pattern to the RAF's Air Ministry Specifications . In November 1941, W A Robotham ,

M2 half-track car - Misplaced Pages Continue

2898-458: The front, the pulling power of crawling-type tractors drew the attention of the military. With tanks coming onto the scene, however, the combination of tracks and wheels seemed impractical when fully tracked or six-wheel, four-wheel drive vehicles were available. The half-track saw a comeback in the 1930s, with development occurring in several countries that would use them in World War II. The White Motor Company, which had designed armored cars for

2967-649: The fully tracked armoured personnel carrier was introduced into service. Most were used in engineering-related tasks involving terrain that would be difficult for even four-wheel drive trucks, such as snow, sand and water-logged soil. Many were significantly modified for their new roles, including being fitted with winches, small cranes, and generators after the rear cabin sides were removed. Some World War II half-tracks were used as all-terrain fire department pumpers or tankers. British armoured fighting vehicle production during World War II This article lists British armoured fighting vehicle production during

3036-413: The imperial garage, including Rolls-Royce cars and Packard trucks. The Imperial Russian Army also fitted the system to a number of their Austin Armoured Cars . From 1916 onward, there was a Russian project by the Putilov Plant to produce military half-tracks (the Austin-Putilov model), along the same lines, using trucks and French track parts. After the Russian Revolution and the establishment of

3105-492: The inclusion of "A" denoting an armament change or "*" denoting some other change. Thirdly by a name for this model of tank – e.g. Crusader. This could have a number associated for the version of this model of tank, e.g. Crusader II is the second variant or Mark to the Crusader I. Some tanks had already picked up names, either nicknames or from project names, but in June 1941 the Prime Minister Winston Churchill asked that all tanks be named. The number can be used for upgrades to

3174-432: The most part, remained a pulling machine. Linn would later register "Haftrak" and "Catruk" as trademarks, the latter for a half-track meant to convert hydraulically from truck to crawler configuration. Tractors used to tow artillery and designs with front wheels and tracks at the rear began to appear prior to the outbreak of war, often based on agricultural machines such as the Holt tractor . The basic half-track concept

3243-430: The need for separate Cruiser and Infantry tanks, this marked the end of the Infantry tank line. British tank designs and the tanks produced were identified by General Staff specification, tank type, the mark (either of type, or of specific model), a service name, and version. For example, the A27M specification for a cruiser tank entered service as 'Tank, Cruiser, Mark VIII' (the eighth cruiser design to see service) with

3312-448: The prime mover and ammunition carrier for the 105mm howitzer , and to armored infantry units for carrying machine gun squads. It was also issued to armored reconnaissance units as an interim solution until more specialized vehicles could be fielded. Between 1942 and 1943, both the M2 and M3 would receive a number of modifications to the drive train, engine, and stowage, among other upgrades. Total production of M2 and derivatives by White

3381-408: The rear, crawlers driven by chains instead of the driving wheels of a locomotive. By 1907, dog and pony show operator H. H. Linn abandoned his gas-and-steam-powered four- and six-wheel-drive creations and had Lombard build a motor home/traction engine run by an underslung four-cylinder Brennan gasoline engine to travel the unimproved roads of the day, with wheels at the front and tracks at the rear:

3450-406: The reduced life span of tracks (up to 10,000 km) compared to tires (up to 80,000 km). The French engineer Adolphe Kégresse converted a number of cars from the personal car pool of Tsar Nicholas II of Russia to half-tracks in 1911. His system was named after him: the Kégresse track , which used a flexible belt rather than interlocking metal segments. He applied it to several vehicles in

3519-469: The rest of the war, although individuals filling the roles varied. As 1942 progressed, Viscount Weir was replaced by Commander Robert Micklem RN of Vickers as Chief Executive of Tank Design. Archie Boyd replaced George Usher as Controller of Tank Production. Claude Gibb was appointed Director-General of Armoured Fighting Vehicles, although Lucas continued to work under him. In August 1943, Robotham stepped down as CETD, returning to Rolls-Royce. In 1944

SECTION 50

#1732851056060

3588-590: The service name 'Cromwell' and was produced in eight variants – Cromwell I to VIII. A related design but with a different engine – specification A27L – was the 'Tank, Cruiser, Mark VIII Centaur' This means that vehicles may be referenced in part or whole by combination of those elements. General Staff specification was a reference to the requirements developed by the Directorate of Tank Design e.g. A13. These were specifications for which new tanks were to be designed. Not all specifications led to vehicles being put into production. More than one design could be drawn up to

3657-438: The small Kettenkrad to the nine-tonne capacity Sd.Kfz. 9 vehicle, and most famously used on Henschel's Tiger I and MAN's Panther main battle tanks. Half-tracks were extensively used after World War II until the late 1960s, mostly in form of surplus World War II vehicles. Half-tracks saw combat in the French colonial empire in the First Indochina War and the Algerian War ; in the Indo-Pakistani wars and conflicts ; and

3726-430: The snow and ice of Canada in mind, Joseph-Armand Bombardier developed 7- and 12-passenger half-track autoneiges in the 1930s, starting what would become the Bombardier industrial conglomerate. The Bombardier vehicle had tracks for propulsion in the rear and skis for steering in front. The skis could be replaced with wheels in the summer, but this was uncommon. The Red Army also experimented with half-tracks, such as

3795-417: The start of the war. The first tanks were delivered in 1940. Covenanter never achieved combat readiness, and was used for training in the UK. Crusader was used extensively in North Africa , but suffered from problems with reliability and insufficient numbers were able to be fielded, many returning to workshops for servicing. Works to replace the Crusader continued in Britain, but when its successors were delayed

3864-475: The tank (synonymous with a second Mark designation), but can also be used for different capability packages, for instance the fitting of a different gun or engine. This isn't necessarily a refinement or improvement, it's simply adapted to a different need or manufacturing technique. They are all based on the same design of tank however, whereas the mark of tank is applied to evolutions of the tank design/specification. For example, Valentine and Churchill both mounted

3933-410: The transition from work on an improved Crusader tank , the Cavalier tank , to development of the new Cromwell tank . Rolls-Royce created the Rolls-Royce Meteor , and set its pre-war car design team to work in improving tank design to enable its use. Later in 1941, the DTD was transferred to the Controller General of Research and Development within the Ministry of Supply. This marked a major change in

4002-399: The unofficial moniker "heavy cruiser". The tanks that received the names Cavalier , Centaur and Cromwell were all designs to meet the same requirement for a cruiser tank to replace the Crusader tank. Design work took place in 1941 and 1942, focussed primarily on developments in engine and transmission technologies. The A24 Cavalier and A27L Centaur used the Nuffield Liberty engine while

4071-418: The vehicle had been standardized as the M2 half-track car. The M2 design was recognized as having the potential for use by mechanized infantry, which spawned the larger-bodied M3 half-track . Both the M2 and M3 were ordered into production in late 1940, with M2 contracts let to Autocar , White and Diamond T. The first vehicles were received by the Army in 1941. The M2 was supplied to armored artillery units as

4140-436: The vehicle, augmented in some cases by track braking controlled by the steering wheel. It is not difficult for someone who can drive a car to drive a half-track, which is a great advantage over fully tracked vehicles, which require specialized training. Half-tracks thus facilitate moving personnel and equipment successfully across varying terrain. The main disadvantage is the increased maintenance to maintain track tension, and

4209-405: The way in the development of armoured warfare after the first world war, and also had a major influence on Axis development under Heinz Guderian until the outbreak of hostilities. Requirements were raised by Lieutenant General Sir Giffard Le Quesne Martel . These types were joined later in the war by requirement for a heavier Assault tank, and eventually the Universal tank expected to replace

SECTION 60

#1732851056060

4278-452: Was a machine gun armed infantry support tank. It had been built down to a price and for quick delivery. Those not lost during the fighting of the battle of France were abandoned at Dunkirk. The few left in the UK were retained for training only. Total production 1937–40: 140. The Matilda II was produced by Vulcan Foundry , John Fowler & Co. , Ruston & Hornsby , the London, Midland and Scottish Railway , Harland and Wolff , and

4347-405: Was about 13,500 units. To meet the needs of Lend-Lease to the Allies, the International Harvester Company produced 3,500 units of the M9 . The M9 was the same as the IH-produced M5 but with different internal stowage and apart from using IH mechanical components the M9 was longer than the M2. The first M2s were fielded in 1941, and would be used in the Philippines, North Africa , and Europe by

4416-435: Was first used in action with the Normandy landings in June 1944. The A30 Cruiser Mk VIII Challenger was created as a derivative of Cromwell to meet the needs for a 17-pounder armed cruiser tank, but production was curtailed when a modification to the Sherman, Sherman Firefly , proved easier to produce. This allowed tank production to re-focus on Cromwell and the new Comet design. A34 Comet improved on Cromwell. It mounted

4485-426: Was formed to design the tanks. The DTD was formed rapidly from available technicians, in many cases lacking experience and lacking in production facilities, while a large number of projects based on General Staff requirements were underway. As such, tank design was increasingly reliant on industry experience and capabilities within Vickers , Vauxhall , Leyland Motors , Nuffield , and later Rolls-Royce. In 1941

4554-429: Was later developed from the Churchill, design commencing in 1943, to be armed with the 17-pounder. By the time it was ready for production (early 1945) the Sherman Firefly and Comet had overcome the immediate need for 17-pounder armed tanks, while the new Centurion offered similar protection in a more agile cruiser tank configuration. Production was cancelled, and with Centurion (and the Universal tank concept) now replacing

4623-408: Was now part of the new Ministry of Supply . As works within the Ministry of Supply scaled up, a new Director General of Tanks and Transport, Peter Bennett, took on the capability of design leadership, and in 1940 added a Controller of Mechanisation (Major-General A.E. Davidson) to supervise the Mechanisation Board, working as before. In May 1940 the War Cabinet had been established, and formed

4692-401: Was officially labeled M2.) Production by the White Motor Company began in 1940 and was expanded to include Autocar . The M2 was initially intended for use as an artillery tractor , but also found use with reconnaissance units. International Harvester Company built the M9 half-track , a variant of their M5 half track, to fulfill the same purpose. It saw wide use in World War II, chiefly by

4761-443: Was originally showcased by the British during the war. With such tractors, the tactical use of heavier guns to supplement the light horse-drawn field guns became feasible. For example, in the British Army it allowed the heavy guns of the Royal Garrison Artillery to be used flexibly on the battlefield. In England, starting in 1905, David Roberts of Richard Hornsby & Sons had attempted to interest British military officials in

#59940