US Krags :
87-473: M1906 may refer to: .30-06 Springfield ammunition, or "M1906" 4.7-inch gun M1906 M1906 Guttekarabin variant of the Krag–Jørgensen FN Baby Browning , or "M1906" M1906 pistol by Webley & Scott [REDACTED] Topics referred to by the same term This disambiguation page lists articles associated with the same title formed as
174-475: A half-capsule , containing only five rounds of ammunition instead of the previous ten. They also, over the next several months, combined what they considered the best ideas from other gunsmiths with a number of their own ideas to design a distinct bolt action for their rifle. The long extractor, situated on top of the bolt, was inspired by the Jarmann mechanism, while the use of curved surfaces for cocking and ejecting
261-521: A Krag at once with no need for careful placement, and when shutting the magazine-door the cartridges are forced to line up correctly inside the magazine. The design was also easy to "top off", and unlike most top-loading magazines, the Krag–Jørgensen's magazine could be topped up without opening the rifle's bolt. The Krag–Jørgensen is a popular rifle among collectors , and is valued by shooters for its smooth action. The 1880s were an interesting period in
348-525: A Parkhurst clip loading attachment to test use of Mauser-type stripper clips. In 1902, 100 rifles were made with 26 in (660 mm) barrels in an effort to develop one model acceptable to both infantry and cavalry. The so-called NRA carbines were rifles cut down to carbine length for sale to members of the National Rifle Association of America beginning in 1926 as a means of keeping skilled armoury workmen employed at Benicia Arsenal . In
435-502: A change in surface treatment or other seemingly minor things. There were especially many model rifles made for the M1894, since several were sent to Steyr in Austria to work as controls and models. A small number of Krag–Jørgensen rifles were converted into harpoon guns, in the same fashion as Jarmann M1884s were converted to Jarmann harpoon rifles . It was realized that converting the Jarmann
522-432: A charger or stripper clip , the magazine of the Krag–Jørgensen is integral with the receiver (the part of the rifle that houses the operating parts), featuring an opening on the right hand side with a hinged cover. Instead of a charger, single cartridges are inserted through the side opening, and are pushed up, around, and into the action by a spring follower. Later, similar to a charger, a claw type clip would be made for
609-580: A commanding officer. The Krag–Jørgensen was formally adopted as the new rifle for the Norwegian Army on April 21, 1894. A total of more than 215,000 Krag–Jørgensen rifles and carbines were built at the Kongsberg Arms Factory in Norway. 33,500 additional M/1894 rifles were produced at Steyr (Österreichische Waffenfabrik Gesellschaft) in 1896–1897 under contracts for the Norwegian Army (29,000 rifles) and
696-508: A feature known as a magazine cut-off . This is a switch on the left rear of the receiver. When flipped up (on the Norwegian Krag-J rifles and carbines), the cut-off does not allow cartridges in the internal magazine to be fed into the chamber by the advancing bolt. This was intended to be used for when soldiers were comfortably firing at distant targets. After each shot, the soldier would take a round out of his pouch and load it directly into
783-531: A fighting force armed with single-shot black-powder weapons into a force armed with modern repeating weapons firing smokeless ammunition. Several thousand were manufactured to equip the Norwegian Armed Forces in the 1880s, and it also saw some, though very limited, use in Sweden. The design is unique, and was the brainchild of Norwegian engineer Jacob Smith Jarmann . After the design had been phased out of
870-544: A good rate of fire and had less than half the spread of the Remington M1867 at 600 m (46 versus 96 cm). It was later eclipsed, however by the radical development of firearms at the time. Within a decade it was phased out and replaced by the Krag–Jørgensen rifle. Even though it was phased out, several second-line units were issued the weapon in 1905, when war between Norway and Sweden was considered imminent. Towards
957-535: A letter–number combination. If an internal link led you here, you may wish to change the link to point directly to the intended article. Retrieved from " https://en.wikipedia.org/w/index.php?title=M1906&oldid=1100005069 " Category : Letter–number combination disambiguation pages Hidden categories: Short description is different from Wikidata All article disambiguation pages All disambiguation pages Krag%E2%80%93J%C3%B8rgensen Norwegian Krags : The Krag–Jørgensen
SECTION 10
#17328520722001044-417: A limited number of Krag–Jørgensens were made in purely civilian models. The Swedish-Norwegian Rifle Commission only briefly looked into bayonets , focusing on selecting the best possible rifle. However, their report mentions that they have experimented with knife bayonets and spike bayonets , both in loose forms and in folding forms. Very few of the experimental bayonets are known today. The bayonet that
1131-422: A long feed belt with him in the field. Even so, it is an interesting and early attempt to increase the firepower of the Krag–Jørgensen. In 1923 Lieutenant Tobiesen, working at Kongsberg Weapon Factory, designed what he called a speed loader for repeating rifles . It can be seen as a new attempt to increase the firepower of the Krag–Jørgensen, just as the attempt to convert it to belt feed. The design consisted of
1218-485: A modified cover that let the user of the rifle attach a magazine from the Madsen light machine gun . The cover had a selector switch, allowing the user to select if he wanted to use the Krag–Jørgensen's internal magazine with its 5 rounds of ammunition, or if he wanted to use the external magazine with 25 rounds. The design was considered promising enough that eight prototypes were manufactured and tested. However, in testing it
1305-516: A ready market, and having access to the several thousand Jarmanns in storage, Kongsberg Våpenfabrikk designed a harpoon gun referred to as the M28. The Jarmann was, at the time of its adoption, considered a good weapon. By comparing it to the Remington M1867, which was the standard-issue rifle in the Norwegian Army, as well as against the standard service rifles of Germany, France and the United Kingdom at
1392-455: A specific demand, but there were also various attempts to increase the firepower of the weapon. The so-called "model rifles" were used both when the various sub types were approved and as a guide for manufacturing. Basically, the model rifle or model carbine was a specially manufactured weapon that showed how the approved weapon should be. They were numbered and stored separately. Several model rifles and carbines were manufactured for things like
1479-541: A war, while denying the same advantage to the Swedes. However, after the rumour first surfaced in 1900, the issue was examined by the Swedish military. They declared the difference to be insignificant, and that both the Swedish and Norwegian ammunition was within the specified parameters laid down. Despite this finding, the Swedish weapon-historian Josef Alm repeated the rumour in a book in the 1930s, leading many to believe that there
1566-635: Is a repeating bolt-action rifle designed by the Norwegians Ole Herman Johannes Krag and Erik Jørgensen in the late 19th century. It was adopted as a standard arm by Norway, Denmark, and the United States. About 300 were delivered to Boer forces of the South African Republic . A distinctive feature of the Krag–Jørgensen action is its magazine . While many other rifles of its era use an integral box magazine loaded by
1653-467: Is no evidence of use by front-line combat units during that conflict. The US 'Krags' were chambered for the rimmed "cartridge, caliber 30, U.S. Army", round, also known as the .30 U.S., .30 Army, or .30 Government, and, more popularly, by its civilian name, the .30-40 Krag . The .30 Army was the first smokeless powder round adopted by the U.S. military, but its civilian name retained the "caliber-charge" designation of earlier black powder cartridges. Thus
1740-408: Is not considered strong enough to fire modern ammunition , since the only locking is provided by the rotating bolt handle. Jacob Smith Jarmann designed his first breech-loading rifle—firing cardboard cartridges—in 1838, but this was turned down by the armed forces at the time. The logic was that a rifle capable of firing 13 shots a minute would be impossible to resupply with enough ammunition. In
1827-629: Is unknown. In 1936 King Ibn Saud from Saudi Arabia initiated talks to buy 20,000 Jarmanns with ammunition for his police force, but the request was turned down by the Norwegian parliament , who claimed that the sale of such outdated weapons would reflect badly upon Norway. In 1938 a private investor — Trygve G. Hygen, a former captain in the Norwegian Army ;— caused a minor international incident when he offered to sell Jarmann rifles to Ceylon . The British Consulate General complained to
SECTION 20
#17328520722001914-587: The .30-06 and 7.62mm NATO rounds. While this was found to be possible, it required a new barrel (or relined barrels) and modification to the bolt and receiver. The resulting cost of the conversion was about the same as that of a new gun of a more modern design. The last Krag–Jørgensen rifles in production were the M/1948 Elgrifle (moose rifle), of which 500 were made in 1948–49 and the M/1951 Elgrifle (moose rifle), of which 1000 were made in 1950–51. Before
2001-456: The 10.15 x 61R cartridge that the various prototypes as well as the service weapon were chambered for. Originally a black-powder round with a paper-wrapped lead bullet , it was later loaded with smokeless powder and a full metal jacket bullet . More than 5 million cartridges were manufactured for the M1884, in addition to several thousand specialty cartridges. The following different variations on
2088-573: The Bay of Pigs invasion . In 1919, the United States provided discounted arms sales to the Liberians, giving them a number of Springfield Krag rifles, in addition to Peabody and Mauser rifles. The Swedish-Norwegian Rifle Commission started its work in 1891. One of their first tasks was to find the best possible calibre for the new weapon. After extensive ballistic tests where different calibres were tested (8 mm, 7.5 mm, 7 mm, 6.5 mm etc.),
2175-637: The Remington M1867 , then the Norwegian standard weapon, with maximum point-blank range of 300 m (330 yd) and spread at 600 m of 96 cm (38 in). In comparison, the Gras rifle displayed a spread of 89 cm (35 in) and the Mauser rifle (presumably a Gewehr 71) had a spread of 80 cm (31.5 in), both at 600 m (660 yd). Despite the problems with the weapon, no fewer than 30,000 were manufactured for
2262-539: The Sauer 200 STR was approved as the new standard Scandinavian target rifle, rebarreled and re-stocked Krag–Jørgensen rifles were the standard Norwegian target rifle together with the Kongsberg- Mauser M59 and M67 . The Krag was preferred for shooting on covered ranges and in fair weather, and dominated on the speed-shooting exercises due to its smooth action, and very fast loading with a spring speedloader, however it
2349-972: The Springfield Armory in Massachusetts from 1894 to 1904. The Krag–Jørgensen rifle in .30 Army found use in the Boxer Rebellion , the Spanish–American War , and the Philippine–American War . A few carbines were used by United States cavalry units fighting Apaches in New Mexico Territory and preventing poaching in Yellowstone National Park . Two-thousand rifles were taken to France by the United States Army 10th–19th engineers (railway) during World War I ; but there
2436-687: The United States Military was searching for a new rifle in the early 1890s. A competition was held in 1892, comparing 53 rifle designs including Lee, Krag, Mannlicher, Mauser, and Schmidt–Rubin. The trials were held at Governors Island , New York, and the finalists were all foreign manufacturers—the Krag, the Lee, and the Mauser. The contract was awarded to the Krag design in August 1892, with initial production deferred as
2523-567: The Wehrmacht 's use of the Krag–Jørgensen is hard to find, it is assumed that it was issued primarily to second line units since the Wehrmacht attempted to only issue firearms in standard calibres to front line troops. It was also issued to the Hird —the armed part of Nasjonal Samling (NS) ("National Unity"), the national-socialist party of Vidkun Quisling 's puppet government . It is further likely that
2610-419: The .30-40 Krag employs a round-nose 220-grain (14 g) cupro-nickel jacketed .30 caliber (7.62 mm) bullet propelled by 40 grains (3 g) of smokeless powder to a muzzle velocity of approximately 2000 feet (600 m) per second. As with the .30-30 Winchester , it is the use of black powder nomenclature that leads to the incorrect assumption that the .30-40 Krag was once a black powder cartridge. In U.S. service,
2697-487: The 10.15 x 61R cartridge have been identified: The Jarmann rifle was a remarkably accurate rifle for its time. In 1886, the joint Norwegian-Swedish rifle commission, which had selected the Jarmann, created a list of the ballistic properties of all the rifles tested. It is clear from the list, reproduced below, that the Jarmann M1884 was significantly better than the other rifles tested, although in part this must be due to
M1906 - Misplaced Pages Continue
2784-435: The 1870s, he stepped down from the daily running of his workshop to work on his newly invented bolt-action rifle. According to the patent, three particulars were considered new and unique with the action he had developed: Another interesting oddity is that the Jarmann action does not have a separate ejector, but instead relies on the fact that the extractor pushes the spent round down onto the elevator. The resulting friction
2871-569: The 1937 Parsley massacre was taken by US observers as evidence of the government's involvement in the killings. At the start of World War II, the Dominican government had 1,860 Krags on-hand, supplementing their over 2,000 Spanish Mausers. In Nicaragua, to support the government of Adolfo Díaz , the American government provided Krags to the newly formed Guardia Nacional in 1925. In 1961, Cuban militias were still fielding some Krag-Jørgensons during
2958-770: The Civilian Marksmanship Organisation (4,500 rifles). The various subtypes of Krag–Jørgensen replaced all rifles and carbines previously used by the Norwegian armed forces, notably the Jarmann M1884 , the Krag–Petersson and the last of the remaining Remington M1867 and modified kammerladers rimfire rifles and carbines. A number of 1896 and 1897 Steyr-manufactured Krag rifles resembling the M1894 Norwegian and chambered in 6.5×55, but lacking some Norwegian inspection markings and having serial numbers outside
3045-607: The German forces demanded that Kongsberg Våpenfabrikk build weapons for the German armed forces. They placed large orders for the Krag–Jørgensen, the Colt M1914 (license-produced Colt M1911 ), and 40 mm anti-aircraft guns. However, production was kept down by sabotage and slow work by the employees. Out of the total of 13,450 rifles ordered by the Germans, only between 3,350 and 3,800 were actually delivered. Early deliveries were identical to
3132-465: The Jarmann rifle: one virtually identical to the magazine used on the Krag–Petersson, one which was the forerunner for the magazine he used on the Krag–Jørgensen. Jacob Smith Jarmann himself also made several prototypes, mainly with tubular magazines under the barrel or detachable magazines mounted sideways over the bolt. The latter was considered unusable in the field, and in the end a tubular magazine
3219-603: The Kar98K. These shortened Krag–Jørgensen's were known in Norway as the Stomperud-Krag . A number of the Krag–Jørgensens manufactured for the Germans have been described as "bastards", created from mismatched parts left over from previous production. Experiments with using the German standard issue 7.92×57mm ammunition, a cartridge as powerful as the .30-06 and the modern 7.62 mm NATO , also took place. While information on
3306-498: The Krag by tying a piece of goatskin on string around the base of the cartridge." The 1916-1924 American occupation of the Dominican Republic resulted in a small flow of Krags to that country. The Guardia Nacional Dominicana issued the received Krag rifles, though the rifles broke down quickly when issued to unfamiliar Dominican troops, and spare parts were hard to obtain. The discovery of Krag bullets in victims' bodies in
3393-751: The Krag eventually proved uncompetitive with Mauser-derived designs, most notably in combat operations in Cuba and the Philippines during the Spanish–American War. It served as the U.S. military's primary rifle for only 12 years, when it was replaced by the M1903 Springfield rifle in 1906 and many units did not receive it until 1908 and later. Surplused Krags were given to the US Navy where they remained in second line service (to arm shore parties, boarding parties, and
3480-404: The Krag that allowed the magazine to be loaded all at once, also known as the Krag "speedloader magazine". The design presents both advantages and disadvantages compared with a top-loading "box" magazine. Normal loading was one cartridge at a time, and this could be done more easily with a Krag than a rifle with a "box" magazine. In fact, several cartridges can be dumped into the opened magazine of
3567-417: The Krag–Jørgensen rifle on July 3, 1889. The Danish rifle differed in several key areas from the weapons later adopted by the United States and Norway, particularly in its use of a forward (as opposed to downward) hinged magazine door, the use of rimmed ammunition, and the use of an outer steel liner for the barrel. The Danish Krag–Jørgensen was chambered for the 8×58R cartridge (0.31 in / 7.87 mm), and
M1906 - Misplaced Pages Continue
3654-459: The M1894, but with German proof marks and substandard workmanship compared to M1894 produced earlier. During the war the model was altered to be externally more like the German Kar98K . This was achieved by shortening the barrel by 15 cm (6 inches) down to 61.3 cm (24 inches) and shortening the stock by 18 cm (7 inches), and adding a front sight hood similar to that of
3741-418: The Norwegian Army, a number of the weapons were rebuilt as harpoon guns . The Jarmann M1884 fired a 10.15 mm black powder cartridge in an 8-round, tubular magazine in which the rounds were lined up in a tube below the barrel. It has a non-rotating bolt (the part of the action that seals the rear end of the barrel) locked by a rotating bolt handle, and reputedly a smooth action. However, this action
3828-460: The Norwegian armed forces in the decade between its adoption in 1884 and the later adoption of the Krag–Jørgensen in 1894. A further 1500 were manufactured for the Swedish Navy in the same period. In Norwegian service, it replaced the Remington M1867 and the last few kammerladers still in use. When the weapon was chosen and first issued, the military considered it a very good weapon. It had
3915-470: The Norwegian government, pointing out that Ceylon was British and they wanted full control of all weapons sold there. The Norwegian government reprimanded Hygen, and the offer was withdrawn. Attempts were also made by Hygen to sell Jarmanns to Lithuania , Cuba , Nicaragua , Bulgaria , Italy and the Netherlands, but without any takers. Some reports indicate that the Germans melted a significant number down
4002-458: The Swedish Mauser action, i.e. requiring a push on the bolt handle to chamber in the Swedish arm. A rumour arose not long after the 6.5×55mm cartridge was adopted that one could use Swedish ammunition in Norwegian rifles, but not Norwegian ammunition in Swedish rifles. Some even alleged that this incompatibility was deliberate, to give Norway the tactical advantage of using captured ammunition in
4089-462: The balance of the weapon changed with every shot fired. However, both of these issues are common to all firearms that use tubular magazines. The first Jarmann design was firmly a single-shot weapon, and Jacob Smith Jarmann was reportedly at first unwilling to design a magazine for it. This may explain why the magazine and bolt do not always work well together. The sights on the Jarmann M1884, as first issued, were graduated from 200 m to 1600 m. There
4176-492: The bolt (thus putting the rifle temporarily out of action). Ordnance officials also believed the Krag's magazine cutoff and lower reloading speed to be an advantage, one which conserved ammunition on the battlefield. This magazine design would later resurface as a distinct disadvantage once U.S. soldiers encountered Spanish troops armed with the charger-loaded 1893 7mm Spanish Mauser in the Spanish–American War . Around 500,000 "Krags" in .30 Army (.30-40) calibre were produced at
4263-463: The bolt handle with the help of a runner. The modification was deemed by some to be unnecessarily complicated. A separate pistolgrip was needed, and the receiver needed major modifications. Jarmann M1884 The Jarmann M1884 is a Norwegian bolt-action repeating rifle designed in 1878 adopted in 1884. The Jarmann's adoption, and subsequent modifications, turned the Norwegian Army from
4350-506: The chamber as if he was using single-shot rifle. The rounds in the magazine are thus held in reserve. If the enemy suddenly charged or the soldier was ordered to charge, the soldier could then retract the cut-off for up to five rounds of rapid shooting. The M1903 Springfield that replaced the Krags had a magazine cutoff, as did the SMLE ( Lee–Enfield ) until 1915. After strenuous tests, Denmark adopted
4437-638: The civilian marksmanship organization serial number range are also known to be in South African museums and may have been used by Boer forces—it is suspected that these may have arrived in South Africa with a small Scandinavian volunteer force that fought for the Boers. A small number of Steyr 1897 M1894-like 6.5×55 rifles with 3-digit serial numbers outside the Norwegian contract ranges and in the same range as these Boer Krags, and lacking Norwegian inspection stamps like
SECTION 50
#17328520722004524-413: The designers knew enough about firearms to be able to calculate the pressures and dimensions necessary. However, two designs were investigated further, and eventually one prototype was built. In 1915 Sergeant Sunngaard proposed a design for making the Krag–Jørgensen into a selfloading rifle. The design was considered over a period of time before it was declared to be 'quite without value', primarily because
4611-403: The development of modern firearms. During this decade smokeless powder came into general use, and the calibre of various service rifles diminished as new small-bore, high-velocity cartridges using smokeless propellant were developed. Many nations adopted repeating bolt-action rifles using such cartridges during this decade. Even though Norway had adopted the repeating Jarmann rifle in 1884, it
4698-775: The early 20th century, the United States also distributed the Krag to some Caribbean countries in which US forces intervened. These included Haiti, where they equipped the Gendarmerie d'Haïti (newly founded in 1915) with surplus Krags. A 1919 letter to the Marine Commandant from the First Provisional Brigade in Port-au-Prince noted: "...[A]bout 2,000 bandits infest the hills... I don't believe that in all Haiti there are more than 400 to 500 rifles, if that many. They are very short of ammunition.. They use our ammunition and
4785-460: The end of their use in the armed forces, the original black powder cartridges were replaced by cartridges filled with smokeless powder. Despite the increase in muzzle velocity, the sights were not altered, thus radically decreasing the accuracy of the rifle. Jarmann M1884s in their original condition are now extremely rare. During the 1920s and 1930s, a number of the surplus rifles was either sold to civilians or rebuilt into M28 harpoon guns. From
4872-457: The experiments with 7.92 mm ammunition means that the Germans considered a wider use of the Krag–Jørgensen. A few Krag–Jørgensen rifles were put together after 1945, for sale to civilian hunters and sharpshooters, among them 1600 of the so-called Stomperud Krag . While there were at no point any plans for re-equipping the Norwegian Army with the Krag–Jørgensen, attempts were made to adapt it to firing more modern, high-powered ammunition like
4959-496: The fact that both the Mannlicher and Mauser submissions were significantly faster to reload than the Krag, the latter, having been designed in Norway, was selected. As in the United States, rapidity of fire was deemed to be of lesser importance in an era when current military philosophy still emphasized precise aimed fire and conservation of ammunition. Instead, the magazine was looked upon as a reserve, to be used only when authorized by
5046-476: The help of master gunsmith Erik Jørgensen . Together they developed the capsule magazine. The principal feature of the capsule magazine was that instead of being a straight box protruding below the stock of the rifle, it wrapped around the bolt action. Early models contained ten rounds and were fitted to modified versions of the Jarmann—though they could be adapted to any bolt-action rifle. In 1886, Denmark
5133-487: The high cost of manufacturing a limited number of the devices. At the same time that the Hotchkiss heavy machine gun was introduced to the Norwegian Army, some people started considering modifying the Krag–Jørgensen to semi-automatic fire. Doing so would have multiplied the firepower of the infantry, allowing more weight of fire to be brought at a target. Most of the designs put forward were not very well thought out and few of
5220-416: The higher muzzle velocity of the Jarmann. The rifle commission found that the Jarmann with its 10.15 mm bullet had a maximum point-blank range of 438 metres (479 yd) with a 1.8 m (6 ft) target. At a range of 600 metres (660 yd) it did not spread more than 61 cm (24 in) with uncoated lead bullets and 46 cm (18 in) with jacketed bullets. This compared very favorably to
5307-462: The last remaining Jarmann rifles in military warehouses during the Nazi occupation . The Germans still gave the rifle a designation, despite being considered too obsolete for their use, the Jarmann M1884 received the designation Gewehr 351(n) . Between the wars, several Norwegian gunsmiths attempted to create harpoon guns, intended for hunting seals and shooting rescue lines to boats in distress. Seeing
SECTION 60
#17328520722005394-528: The like or stored in crates in the holds of older ships) well into the 1930s. US Marines were still using Krags in Nicaragua in the late 1920s. There were at least nine different models of the American Krag–Jørgensen: A few prototype Model 1898 sniper rifles were assembled with Cataract telescopic sights for limited testing. In 1901, 100 Model 1898 rifles, and 100 Model 1899 carbines were fitted with
5481-463: The low-numbered 1897 rifles in South African museums, are known to exist in the US—it is not known if these have Boer connections or were initially delivered elsewhere. The Krag–Jørgensen was produced in Norway for a very long time, and in a number of different variations. The major military models are the following: In addition, most models were produced for the civilian market as well. After World War II
5568-452: The mid-1920s and until the German invasion of Norway , it was possible for civilians to buy surplus Jarmann rifles for about a quarter of what a brand-new Krag–Jørgensen would cost. Despite the reasonable price, it appears that very few were sold. Attempts were also made to sell the rifles and ammunition abroad. In 1929, about 5000 rifles were sold to a German firm, but the fate of these Jarmanns
5655-499: The optimal caliber was determined to be 6.5 mm (0.256 in). Following this decision, a joint Norwegian-Swedish commission was established in December 1893. This commission worked through a series of meetings to decide on the different measurements for the cartridge case. A rimless cartridge case of 55 mm length was approved, and each possible measurement (diameter at base, diameter at neck, angle of case, angle of shoulder etc.)
5742-492: The requisite pressure would not be attainable without major redesign of the rifle. For this reason, no prototype was made. In 1938 a Swedish design called the SNABB was considered. This was a modification that could be made to virtually any bolt-action rifle allowing it to be converted into a self-loading weapon, therefore presenting a chance to cut costs as compared to manufacturing new weapons. The device used gas pressure to operate
5829-604: The result of protests from domestic inventors and arms manufacturers. Two rifle designers, Russell and Livermore, even sued the US government over the initial selection of the Krag, forcing a review of the testing results in April and May 1893. In spite of this, an improved form of the Krag–Jørgensen was again selected, and was awarded the contract. The primary reason for the selection of the Krag appears to have been its magazine design, which could be topped off as needed without raising and retracting
5916-639: The rifle. Photographs of high-ranking Boer officers holding M1894-like rifles exist. Cartridge casings in 6.5×55 have been found on the Magersfontein battlefield and may have been fired by such M1894-like rifles. Some sources state that about 100 1896-date and at least about 200 1897-date rifles reached the Boers. Some rifles meeting this description exist in South African museums with Boer-war documentation, and in England documented as captured bring-backs. A few rifles having Norwegian inspector stamps and serial numbers in
6003-468: The same feed belts that were used on the Hotchkiss heavy machine gun in use in the Norwegian Army at the time. The backward and forward movement of the bolt operates a mechanism that moves the belt through the receiver, presenting fresh rounds for the weapon. While this may have been advantageous while fighting from fixed fortifications, it cannot have been very practical for the user of the rifle to carry
6090-520: The sequences of those produced for Norway, were in Boer hands during the Second Boer War (1899–1902), most have serial numbers below 900. Markings show these rifles were manufactured by Steyr concurrently with a large order of M1894 rifles made for Norway. Some parts of rejected Norwegian rifles may have been used in these weapons—many small parts have serial numbers that do not match receiver numbers, these mismatched small parts sometimes have numbers in ranges of rifles made for Norway, yet appear original to
6177-443: The sight leaf, which could be revealed by folding the leaf fully forward. The battle sight was set to a fixed range of about 430 m (470 yd), close to the maximum point-blank range of the weapon. During testing to determine the correct graduation of the sights the rifle commission used improved ammunition, which increased the muzzle velocity to about 485 to 500 m/s. The aforementioned Norwegian-Swedish commission also designed
6264-466: The spent round was probably inspired by the designs from Mauser . For a time after the weapon was adopted by Denmark they experimented with dual frontal locking lugs, but decided against it on grounds of cost and weight. The ammunition of the day did not need dual frontal locking lugs, and the bolt already had three lugs—one in front, one just in front of the bolt handle, and the bolt handle itself—which were considered more than strong enough. The rifle had
6351-418: The test, three rifles were shortlisted: About fifty Krag–Jørgensen rifles were produced in 1893 and issued to soldiers for field testing. The reports were good, and a few modifications were later incorporated into the design. For example, to prevent double feed manlfunctions , the extractor was redesigned to replace push feed with controlled feed , and sear leaf spring was replaced by a coil spring. Despite
6438-412: Was a difference in cartridge blueprint measurements between Swedish and Norwegian 6.5×55mm ammunition, but this may be unintentional. Due to different interpretations of the blueprint standard, i.e. the standards of manufacturing using maximum chamber in the Krag vs. minimum chamber in the Swedish Mauser, a small percentage of the ammunition produced in Norway proved to be slightly oversize when chambered in
6525-472: Was a significant difference between the ammunition manufactured in Norway and Sweden. It is worth noting that Sweden would later adopt a 6.5×55mm rifle with a much stronger Mauser bolt action, the m/94 carbine in 1894 and the m/96 rifle in 1896, both of which were proof-tested with loads generating significantly more pressure than those used to proof the Norwegian Krag action. Once the question of ammunition
6612-410: Was an additional sidemounted volley sight, intended for indirect volley fire over long distances, from 1600 m to 2400 m. To be effective, an entire company would have to fire at the same time, which would ensure that at least some of the bullets found their targets. During production, the sights were modified, and M1884s with serial numbers higher than 4330 also had a battle sight fitted to the backside of
6699-506: Was at least in the early years used as a single shooter with the magazine in reserve. It stayed in service right up to the German invasion of Denmark on April 9, 1940. Danish Krags were given the German identification code Scharfschützen-Gewehr 312(d) . While information on the various subtypes of the Krag–Jørgensen used in Denmark has proven difficult to find, at least the following subtypes were manufactured: Like many other armed forces,
6786-412: Was decided upon. The corresponding dimensions of the cartridge chamber to be used in a future service rifle was also determined. The cartridge became what is later known as 6.5×55mm. The round of ammunition is also known as 6.5×55 Krag, 6.5×55 Scan (Scandinavia), 6.5×55 Mauser, 6.5×55 Swedish, and 6.5×55 Nor (Norwegian), but they all referred to the same cartridge. Some historians have assumed that there
6873-451: Was enough to safely eject the round from the receiver. The design was first tested by a joint Norwegian-Swedish rifle commission. Their first tests were favorable but highlighted the desirability of a repeating weapon, that is, a weapon with a magazine. Several magazine-fed prototype rifles were built— Ole Herman Johannes Krag , the designer of the Krag–Petersson and the Krag–Jørgensen repeating rifles, designed two different magazines for
6960-490: Was finally approved, probably alongside the rifle itself, was a knife bayonet. Later on, longer bayonets were approved as well, and renewed experiments with spike bayonets took place during the development of the M/1912. A number of special bayonets and oddities were experimented with during the time the Krag–Jørgensen was a Norwegian service rifle, two of which are mentioned here. During the occupation of Norway by Nazi Germany ,
7047-405: Was known to change its point of impact under wet conditions due to the single front locking lug. Thus, many shooters had both a Krag and a "Mauser" for varying conditions. The Krag–Jørgensen was manufactured for almost 60 years in Norway. During this time several special models and prototypes were designed and manufactured. Some of these special weapons were meant as an aid in production or to meet
7134-399: Was more cost efficient than converting the Krag–Jørgensen, so further conversions was halted. It is not known how many were converted in this way. The factory museum at Kongsberg Weapon Factory preserved a prototype of an M1894 modified for belt feed. Although no documentation has been uncovered, it's clear that the rifle has been modified at an early stage in the manufacturing process to use
7221-484: Was on the verge of adopting a new rifle for its armed forces. One of the early prototypes of the new rifle was sent to Denmark. The feedback given by the Danes was vital in the further development of the weapon. The test performed in Denmark revealed the need to lighten the rifle, as well as the possible benefits of a completely new action. Krag and Jørgensen therefore decided to convert the magazine into what they referred to as
7308-476: Was revealed that the heavy magazine mounted on the side of the weapon not only made the rifle more cumbersome to carry and use, but also made it twist sideways. It was decided that the "speed loader" was not a practical design for military use and no further manufacture took place. In 1926, a group of seal hunters approached Kongsberg Weapon Factory and asked to purchase a number of speedloaders for use when hunting seals from small boats. They were turned down due to
7395-543: Was selected for the weapon. The magazine is similar to the Kropatschek tubular magazine and may have been inspired by it, although it is just as possible that the magazine is inspired by the Krag–Petersson magazine. Despite being a trailblazer with its then-pioneering design, the Jarmann M1884 cannot be considered successful. The combination of tubular magazine and centerfire ammunition has been referred to as "too excitable", especially when used with pointed bullets. Also,
7482-514: Was settled, the Norwegians started looking at a modern arm to fire their newly designed cartridge. The processing was modelled on the US Army Ordnance selection process and considered, among other things, sharp-shooting at different ranges, shooting with defective or dirty ammunition, rapidity of shooting, conservation of ammunition, corrosion resistance, and ease of assembly and disassembly. After
7569-474: Was soon clear that it was at best an interim weapon. Ole Krag , captain in the Norwegian Army and director of Kongsberg Våpenfabrikk (the government weapons factory), therefore continued the development of small arms, as he had since at least 1866. Not satisfied with the tubular magazine of the Jarmann rifle and his earlier Krag–Petersson rifle (adopted by the Royal Norwegian Navy in 1876), he enlisted
#199800