Misplaced Pages

Tarmac (company)

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

Building material is material used for construction . Many naturally occurring substances, such as clay , rocks , sand, wood , and even twigs and leaves, have been used to construct buildings and other structures, like bridges . Apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. The manufacturing of building materials is an established industry in many countries and the use of these materials is typically segmented into specific specialty trades, such as carpentry , insulation , plumbing , and roofing work. They provide the make-up of habitats and structures including homes .

#17982

91-572: Tarmac is a British building materials company headquartered in Solihull , England . The company was formed as Lafarge Tarmac in March 2013, by the merger of Anglo American 's Tarmac UK and Lafarge 's operations in the United Kingdom. In July 2014, Anglo American agreed to sell its stake to Lafarge, to assist Lafarge in its merger with Holcim and allay competition concerns. Prior to 1999, Tarmac Plc

182-468: A Thanksgiving dinner can produce very high concentrations of particulate matter, exceeding 300 μg/m . Particulates can penetrate deep into the lungs and brain from blood streams, causing health problems such as heart disease , lung disease , cancer and preterm birth . Other small particles include airborne microplastics , for example in the form of microplastic dust produced during renovation , building, bridge and road reconstruction projects and

273-469: A beaver 's lodge. These were variously named wikiups , lean-tos, and so forth. An extension on the brush building idea is the wattle and daub process in which clay soils or dung , usually cow , are used to fill in and cover a woven brush structure. This gives the structure more thermal mass and strength. Wattle and daub is one of the oldest building techniques. Many older timber frame buildings incorporate wattle and daub as non load bearing walls between

364-561: A ceramic material. Fired bricks can be solid or have hollow cavities to aid in drying and make them lighter and easier to transport. The individual bricks are placed upon each other in courses using mortar . Successive courses being used to build up walls, arches , and other architectural elements. Fired brick walls are usually substantially thinner than cob/adobe while keeping the same vertical strength. They require more energy to create but are easier to transport and store, and are lighter than stone blocks. Romans extensively used fired brick of

455-568: A gaseous and a particulate materials which, with particular hazards arising from levels of carbon monoxide and very small particulates (fine particulate matter, especially PM2.5 and PM10 ) which get into the bronchioles and alveoles in the lung. Inhaling secondhand smoke on multiple occasions can cause asthma , pneumonia , lung cancer , and sudden infant death syndrome , among other conditions. Thirdhand smoke (THS) refers to chemicals that settle on objects and bodies indoors after smoking. Exposure to thirdhand smoke can happen even after

546-476: A garden. This was much more prevalent in pre-industrial times, when laws existed as to the amount of wood one could cut at any one time to ensure there would be a supply of timber for the future, but is still a viable form of agriculture. Bricks are made in a similar way to mud-bricks except without the fibrous binder such as straw and are fired ("burned" in a brick clamp or kiln ) after they have air-dried to permanently harden them. Kiln fired clay bricks are

637-421: A lower lifetime cost. For example, an asphalt shingle roof costs less than a metal roof to install, but the metal roof will last longer so the lifetime cost is less per year. Some materials may require more care than others, maintaining costs specific to some materials may also influence the final decision. Risks when considering lifetime cost of a material is if the building is damaged such as by fire or wind, or if

728-497: A method based on the ‘maturity concept’ i.e. taking in consideration both time and temperature of cement hydration reaction. Recent work on aging of lignocellulosic materials in the cement paste showed hydrolysis of hemicelluloses and lignin that affects the interface between particles or fibers and concrete and causes degradation. Bricks were laid in lime mortar from the time of the Romans until supplanted by Portland cement mortar in

819-427: A much greater risk of developing asthma and allergic rhinitis . More than half of adult workers in moldy or humid buildings suffer from nasal or sinus symptoms due to mold exposure. Some varieties of mold contain toxic compounds ( mycotoxins ). However, exposure to hazardous levels of mycotoxin via inhalation is not possible in most cases, as toxins are produced by the fungal body and are not at significant levels in

910-424: A relative humidity of indoor air below 60%, in agreement with the guidelines for thermal comfort that recommend a relative humidity between 40 and 60 %. Moisture buildup in buildings may arise from water penetrating areas of the building envelope or fabric, from plumbing leaks, rainwater or groundwater penetration, or from condensation due to improper ventilation, insufficient heating or poor thermal quality of

1001-957: A shape and type now called Roman bricks . Building with brick gained much popularity in the mid-18th century and 19th centuries. This was due to lower costs with increases in brick manufacturing and fire-safety in increasingly crowded cities. The cinder block supplemented or replaced fired bricks in the late 20th century often being used for the inner parts of masonry walls and by themselves. Structural clay tiles (clay blocks) are clay or terracotta and typically are perforated with holes. Cement bonded composites are made of hydrated cement paste that binds wood, particles, or fibers to make pre-cast building components. Various fiberous materials, including paper , fiberglass , and carbon-fiber have been used as binders. Wood and natural fibers are composed of various soluble organic compounds like carbohydrates , glycosides and phenolics. These compounds are known to retard cement setting. Therefore, before using

SECTION 10

#1732855893018

1092-449: A significantly higher hazard as they are more likely to release fibers to the air. Indoors ozone (O 3 ) is produced by certain high-voltage electric devices (such as air ionizers ), and as a by-product of other types of pollution. It appears in lower concentrations indoors than outdoors, usually at 0.2-0.7 of the outdoor concentration. Typically, most ozone is lost to surface reactions indoors, rather than to reactions in air, due to

1183-408: A variety of building applications, including load-bearing, filling, insulating, and plastering materials. These materials vary in structure depending on the formulation used. Plant fibres can be combined with binders and then used in construction to provide thermal, hydric or structural functions. The behaviour of concrete based on plant fibre is mainly governed by the amount of the fibre constituting

1274-499: A wood in making cement bonded composites, its compatibility with cement is assessed. Wood-cement compatibility is the ratio of a parameter related to the property of a wood-cement composite to that of a neat cement paste. The compatibility is often expressed as a percentage value. To determine wood-cement compatibility, methods based on different properties are used, such as, hydration characteristics, strength, interfacial bond and morphology. Various methods are used by researchers such as

1365-506: Is 4 mg/m . Acute exposure should not exceed 10 mg/m in 8 hours, 35 mg/m in one hour and 100 mg/m in 15 minutes. Secondhand smoke is tobacco smoke which affects people other than the 'active' smoker. It is made up of the exhaled smoke (15%) and mostly of smoke coming from the burning end of the cigarette, known as sidestream smoke (85%). Secondhand smoke contains more than 7000 chemicals, of which hundreds are harmful to health. Secondhand tobacco smoke includes both

1456-438: Is 60 μg/m for long-term exposure and 100 μg/m as the maximum average over an 8-hour period. The EPA standard for ozone concentration is 0.07 ppm average over an 8-hour period. Occupants in buildings can be exposed to fungal spores, cell fragments, or mycotoxins which can arise from a host of means, but there are two common classes: (a) excess moisture induced growth of mold colonies and (b) natural substances released into

1547-476: Is a generic building material and is used in building just about any type of structure in most climates. Wood can be very flexible under loads, keeping strength while bending, and is incredibly strong when compressed vertically. There are many differing qualities to the different types of wood, even among same tree species. This means specific species are better suited for various uses than others. And growing conditions are important for deciding quality. "Timber"

1638-601: Is a parasite of protozoans such as amoeba , and thus requires conditions suitable for both organisms. The bacterium forms a biofilm which is resistant to chemical and antimicrobial treatments, including chlorine. Remediation for Legionella outbreaks in commercial buildings vary, but often include very hot water flushes (160 °F (71 °C)), sterilisation of standing water in evaporative cooling basins, replacement of shower heads, and, in some cases, flushes of heavy metal salts. Preventive measures include adjusting normal hot water levels to allow for 120 °F (49 °C) at

1729-447: Is a particular concern in low and middle-income countries where such practices are common. Cooking using natural gas (also called fossil gas, methane gas or simply gas) is associated with poorer indoor air quality. Combustion of gas produces nitrogen dioxide and carbon monixide, and can lead to increased concentrations of nitrogen dioxide throughout the home environment which is linked to respiratory issues and diseases . One of

1820-483: Is combined with straws to create light clay , wattle and daub , and mud plaster . Wet-laid, or damp, walls are made by using the mud or clay mixture directly without forming blocks and drying them first. The amount of and type of each material in the mixture used leads to different styles of buildings. The deciding factor is usually connected with the quality of the soil being used. Larger amounts of clay are usually employed in building with cob , while low-clay soil

1911-572: Is hard to warm without consuming considerable energy but, once warm, its thermal mass means that can retain heat for useful periods of time. Dry-stone walls and huts have been built for as long as humans have put one stone on top of another. Eventually, different forms of mortar were used to hold the stones together, cement being the most commonplace now. The granite -strewn uplands of Dartmoor National Park, United Kingdom, for example, provided ample resources for early settlers. Circular huts were constructed from loose granite rocks throughout

SECTION 20

#1732855893018

2002-426: Is lightweight, easily shaped, and an excellent insulator. Foam is usually used as part of a structural insulated panel , wherein the foam is sandwiched between wood or cement or insulating concrete forms. Glassmaking is considered an art form as well as an industrial process or material. Clear windows have been used since the invention of glass to cover small openings in a building. Glass panes provided humans with

2093-452: Is part of indoor environmental quality (IEQ), along with other factors that exert an influence on physical and psychological aspects of life indoors (e.g., lighting, visual quality, acoustics, and thermal comfort). Indoor air pollution is a major health hazard in developing countries and is commonly referred to as " household air pollution " in that context. It is mostly relating to cooking and heating methods by burning biomass fuel , in

2184-538: Is significant for human health as humans spend a large proportion of their time in indoor environments. Americans and Europeans on average spend approximately 90% of their time indoors. The World Health Organization (WHO) estimates that 3.2 million people die prematurely every year from illnesses attributed to indoor air pollution caused by indoor cooking, with over 237 thousand of these being children under 5. These include around an eighth of all global ischaemic heart disease , stroke , and lung cancer deaths. Overall

2275-650: Is the air quality within buildings and structures . Poor indoor air quality due to indoor air pollution is known to affect the health, comfort, and well-being of building occupants. It has also been linked to sick building syndrome , respiratory issues, reduced productivity, and impaired learning in schools. Common pollutants of indoor air include: secondhand tobacco smoke , air pollutants from indoor combustion , radon , molds and other allergens , carbon monoxide , volatile organic compounds , legionella and other bacteria, asbestos fibers , carbon dioxide , ozone and particulates . Source control, filtration, and

2366-563: Is the home of choice among nomadic groups all over the world. Two well-known types include the conical teepee and the circular yurt . The tent has been revived as a major construction technique with the development of tensile architecture and synthetic fabrics. Modern buildings can be made of flexible material such as fabric membranes, and supported by a system of steel cables, rigid or internal, or by air pressure. Recently, synthetic polystyrene or polyurethane foam has been used in combination with structural materials, such as concrete. It

2457-411: Is the longest-lasting building material available, and is usually readily available. There are many types of rock, with differing attributes that make them better or worse for particular uses. Rock is a very dense material so it gives a lot of protection; its main drawback as a building material is its weight and the difficulty of working it. Its energy density is both an advantage and disadvantage. Stone

2548-504: Is the term used for construction purposes except the term "lumber" is used in the United States. Raw wood (a log, trunk, bole) becomes timber when the wood has been "converted" (sawn, hewn, split) in the forms of minimally-processed logs stacked on top of each other , timber frame construction, and light-frame construction . The main problems with timber structures are fire risk and moisture-related problems. In modern times softwood

2639-563: Is then air dried and can be laid dry or with a mortar or clay slip . Sand is used with cement , and sometimes lime , to make mortar for masonry work and plaster . Sand is also used as a part of the concrete mix. An important low-cost building material in countries with high sand content soils is the Sandcrete block, which is weaker but cheaper than fired clay bricks. Sand reinforced polyester composite are used as bricks. Rock structures have existed for as long as history can recall. It

2730-465: Is used as a lower-value bulk material, whereas hardwood is usually used for finishings and furniture. Historically timber frame structures were built with oak in western Europe, recently douglas fir has become the most popular wood for most types of structural building. Many families or communities, in rural areas, have a personal woodlot from which the family or community will grow and harvest trees to build with or sell. These lots are tended to like

2821-452: Is used as structural framework for larger buildings such as skyscrapers , or as an external surface covering. There are many types of metals used for building. Metal figures quite prominently in prefabricated structures such as the Quonset hut , and can be seen used in most cosmopolitan cities. It requires a great deal of human labor to produce metal, especially in the large amounts needed for

Tarmac (company) - Misplaced Pages Continue

2912-416: Is used in the home. Benzene is emitted from fuel stored in attached garages. Human activities such as cooking and cleaning can also emit VOCs. Cooking can release long-chain aldehydes and alkanes when oil is heated and terpenes can be released when spices are prepared and/or cooked. Leaks of natural gas from cooking appliances have been linked to elevated levels of VOCs including benzene in homes in

3003-409: Is usually associated with sod house or sod roof construction. The other main ingredients include more or less sand / gravel and straw /grasses. Rammed earth is both an old and newer take on creating walls, once made by compacting clay soils between planks by hand; nowadays forms and mechanical pneumatic compressors are used. Soil, and especially clay, provides good thermal mass ; it

3094-580: Is very good at keeping temperatures at a constant level. Homes built with earth tend to be naturally cool in the summer heat and warm in cold weather. Clay holds heat or cold, releasing it over a period of time like stone. Earthen walls change temperature slowly, so artificially raising or lowering the temperature can use more resources than in say a wood built house, but the heat/coolness stays longer. People building with mostly dirt and clay, such as cob, sod, and adobe, created homes that have been built for centuries in western and northern Europe, Asia, as well as

3185-567: The Neolithic and early Bronze Age , and the remains of an estimated 5,000 can still be seen today. Granite continued to be used throughout the Medieval period (see Dartmoor longhouse ) and into modern times. Slate is another stone type, commonly used as roofing material in the United Kingdom and other parts of the world where it is found. Stone buildings can be seen in most major cities, and some civilizations built predominantly with stone, such as

3276-399: The initial and long-term economic, ecological, energy, and social costs of building materials. The initial economic cost of building materials is the purchase price. This is often what governs decision making about what materials to use. Sometimes people take into consideration the energy savings or durability of the materials and see the value of paying a higher initial cost in return for

3367-434: The reuse , recycling, or disposal of construction waste . Two concepts in building which account for the ecological economics of building materials are green building and sustainable development . The initial energy costs include the amount of energy consumed to produce, deliver and install the material. The long term energy cost is the economic, ecological, and social costs of continuing to produce and deliver energy to

3458-554: The Egyptian and Aztec pyramids and the structures of the Inca civilization. Thatch is one of the oldest of building materials known. "Thatch" is another word for "grass"; grass is a good insulator and easily harvested. Many African tribes have lived in homes made completely of grasses and sand year-round. In Europe, thatch roofs on homes were once prevalent but the material fell out of favor as industrialization and improved transport increased

3549-706: The Office of Fair Trading, and in February 2012, the Commission reported that it had a "number of concerns" about the combination. The deal was set to combine Anglo American's Tarmac UK unit, employing 4,500 people, with Lafarge's cement, concrete and aggregate quarries, depots and terminals. Due to the size of the venture, the Office of Fair Trading referred it to the United Kingdom's Competition Commission , who concluded in May 2012 that due to

3640-900: The US. Due to these initiatives an increasing number of low-emitting products became available to purchase. At least 18 microbial VOCs (MVOCs) have been characterised including 1-octen-3-ol (mushroom alcohol), 3-Methylfuran , 2-pentanol , 2-hexanone , 2-heptanone , 3-octanone , 3-octanol , 2-octen-1-ol , 1-octene , 2-pentanone , 2-nonanone , borneol , geosmin , 1-butanol , 3-methyl-1-butanol , 3-methyl-2-butanol , and thujopsene . The last four are products of Stachybotrys chartarum , which has been linked with sick building syndrome . Many common building materials used before 1975 contain asbestos , such as some floor tiles, ceiling tiles, shingles, fireproofing, heating systems, pipe wrap, taping muds, mastics, and other insulation materials. Normally, significant releases of asbestos fiber do not occur unless

3731-858: The USA. Cleaning products contain a range of VOCs, including monoterpenes , sesquiterpenes , alcohols and esters . Once released into the air, VOCs can undergo reactions with ozone and hydroxyl radicals to produce other VOCs, such as formaldehyde. Health effects include eye, nose, and throat irritation ; headaches , loss of coordination, nausea ; and damage to the liver , kidney, and central nervous system . Testing emissions from building materials used indoors has become increasingly common for floor coverings, paints, and many other important indoor building materials and finishes. Indoor materials such as gypsum boards or carpet act as VOC 'sinks', by trapping VOC vapors for extended periods of time, and releasing them by outgassing . The VOCs can also undergo transformation at

Tarmac (company) - Misplaced Pages Continue

3822-568: The WHO estimated that poor indoor air quality resulted in the loss of 86 million healthy life years in 2019. Studies in the UK and Europe show exposure to indoor air pollutants, chemicals and biological contamination can irritate the upper airway system, trigger or exacerbate asthma and other respiratory or cardiovascular conditions, and may even have carcinogenic effects. Poor indoor air quality can cause sick building syndrome . Symptoms include burning of

3913-456: The ability to both let light into rooms while at the same time keeping inclement weather outside. Glass is generally made from mixtures of sand and silicates , in a very hot fire stove called a kiln , and is very brittle. Additives are often included the mixture used to produce glass with shades of colors or various characteristics (such as bulletproof glass or lightbulbs). The use of glass in architectural buildings has become very popular in

4004-556: The actual cigarette smoke is not present anymore and affect those entering the indoor environment much later. Toxic substances of THS can react with other chemicals in the air and produce new toxic chemicals that are otherwise not present in cigarettes. The only certain method to improve indoor air quality as regards secondhand smoke is to eliminate smoking indoors. Indoor e-cigarette use also increases home particulate matter concentrations. Atmospheric particulate matter, also known as particulates , can be found indoors and can affect

4095-948: The air such as animal dander and plant pollen. While mold growth is associated with high moisture levels, it is likely to grow when a combination of favorable conditions arises. As well as high moisture levels, these conditions include suitable temperatures, pH and nutrient sources. Mold grows primarily on surfaces, and it reproduces by releasing spores, which can travel and settle in different locations. When these spores experience appropriate conditions, they can germinate and lead to mycelium growth. Different mold species favor different environmental conditions to germinate and grow, some being more hydrophilic (growing at higher levels of relative humidity) and other more xerophilic (growing at levels of relative humidity as low as 75–80%). Mold growth can be inhibited by keeping surfaces at conditions that are further from condensation, with relative humidity levels below 75%. This usually translates to

4186-465: The air. Inhalation of asbestos fibers over long exposure times is associated with increased incidence of lung cancer , mesothelioma , and asbestosis . The risk of lung cancer from inhaling asbestos fibers is significantly greater for smokers. The symptoms of disease do not usually appear until about 20 to 30 years after the first exposure to asbestos. Although all asbestos is hazardous, products that are friable, e.g. sprayed coatings and insulation, pose

4277-612: The availability of other materials. Today, though, the practice is undergoing a revival. In the Netherlands, for instance, many new buildings have thatched roofs with special ridge tiles on top. Wood has been used as a building material for thousands of years in its natural state. Today, engineered wood is becoming very common in industrialized countries. Wood is a product of trees , and sometimes other fibrous plants, used for construction purposes when cut or pressed into lumber and timber, such as boards, planks and similar materials. It

4368-624: The bathroom floor drains, exacerbated by the draw of bathroom exhaust fans, resulting in the rapid spread of SARS in Amoy Gardens in Hong Kong . Elsewhere in Hong Kong, SARS CoV RNA was found on the carpet and in the air intake vents of the Metropole Hotel, which showed that secondary environmental contamination could generate infectious aerosols and resulted in superspreading events. Humans are

4459-719: The brain of oxygen, acute exposure to carbon monoxide may have effects on the neurological system (headache, nausea, dizziness, alteration in consciousness and subjective weakness), the cardiovascular and respiratory systems ( myocardial infarction , shortness of breath, or rapid breathing, respiratory failure ). Acute exposure can also lead to long-term neurological effects such as cognitive and behavioural changes. Severe CO poisoning may lead to unconsciousness, coma and death. Chronic exposure to low concentrations of carbon monoxide may lead to lethargy, headaches, nausea, flu-like symptoms and neuropsychological and cardiovascular issues. The WHO recommended levels of indoor CO exposure in 24 hours

4550-430: The building blocks can be manufactured off site in a centralized location at a brickworks and transported to multiple building locations. These blocks can also be monetized more easily and sold. Structural mud bricks are almost always made using clay, often clay soil and a binder are the only ingredients used, but other ingredients can include sand, lime, concrete, stone and other binders . The formed or compressed block

4641-443: The building envelope. Even something as simple as drying clothes indoors on radiators can increase the risk of mold growth, if the humidity produced is not able to escape the building via ventilation. Mold predominantly affects the airways and lungs. Known effects of mold on health include asthma development and exacerbation, with children and elderly at greater risk of more severe health impacts. Infants in homes with mold have

SECTION 50

#1732855893018

4732-411: The building for its use, maintenance, and eventual removal. The initial embodied energy of a structure is the energy consumed to extract, manufacture, deliver, install, the materials. The lifetime embodied energy continues to grow with the use, maintenance, and reuse/recycling/disposal of the building materials themselves and how the materials and design help minimize the life-time energy consumption of

4823-502: The building industries. Corrosion is metal's prime enemy when it comes to longevity. The term plastics covers a range of synthetic or semi-synthetic organic condensation or polymerization products that can be molded or extruded into objects, films, or fibers . Their name is derived from the fact that in their semi-liquid state they are malleable, or have the property of plasticity . Plastics vary immensely in heat tolerance, hardness, and resiliency. Combined with this adaptability,

4914-433: The building materials are disturbed, such as by cutting, sanding, drilling, or building remodelling. Removal of asbestos-containing materials is not always optimal because the fibers can be spread into the air during the removal process. A management program for intact asbestos-containing materials is often recommended instead. When asbestos-containing material is damaged or disintegrates, microscopic fibers are dispersed into

5005-457: The cement hydrates and eventually hardens into a stone-like material. When used in the generic sense, this is the material referred to by the term "concrete". For a concrete construction of any size, as concrete has a rather low tensile strength , it is generally strengthened using steel rods or bars (known as rebars ). This strengthened concrete is then referred to as reinforced concrete . In order to minimise any air bubbles, that would weaken

5096-648: The early 20th century. Gypsum concrete is a mixture of gypsum plaster and fibreglass rovings . Although plaster and fibres fibrous plaster have been used for many years, especially for ceilings, it was not until the early 1990s that serious studies of the strength and qualities of a walling system Rapidwall , using a mixture of gypsum plaster and 300mm plus fibreglass rovings, were investigated. With an abundance of gypsum (naturally occurring and by-product chemical FGD and phospho gypsums) available worldwide, Gypsum concrete-based building products, which are fully recyclable, offer significant environmental benefits. Metal

5187-409: The early 20th century. Cement blocks also sometimes are filled with grout or covered with a parge coat . Concrete is a composite building material made from the combination of aggregate and a binder such as cement . The most common form of concrete is Portland cement concrete, which consists of mineral aggregate (generally gravel and sand ), portland cement and water . After mixing,

5278-656: The eyes, scratchy throat, blocked nose, and headaches. Indoor combustion, such as for cooking or heating, is a major cause of indoor air pollution and causes significant health harms and premature deaths. Hydrocarbon fires cause air pollution. Pollution is caused by both biomass and fossil fuels of various types, but some forms of fuels are more harmful than others. Indoor fire can produce black carbon particles, nitrogen oxides , sulfur oxides , and mercury compounds , among other emissions. Around 3 billion people cook over open fires or on rudimentary cook stoves. Cooking fuels are coal, wood, animal dung, and crop residues. IAQ

5369-452: The form of wood , charcoal , dung , and crop residue , in indoor environments that lack proper ventilation. Millions of people, primarily women and children, face serious health risks. In total, about three billion people in developing countries are affected by this problem. The World Health Organization (WHO) estimates that cooking-related indoor air pollution causes 3.8 million annual deaths. The Global Burden of Disease study estimated

5460-623: The gas-phase, or on surfaces. VOCs presenting health hazards include benzene , formaldehyde , tetrachloroethylene and trichloroethylene . VOCs are emitted by thousands of indoor products. Examples include: paints, varnishes, waxes and lacquers, paint strippers, cleaning and personal care products, pesticides, building materials and furnishings, office equipment such as copiers and printers, correction fluids and carbonless copy paper , graphics and craft materials including glues and adhesives, permanent markers, and photographic solutions. Chlorinated drinking water releases chloroform when hot water

5551-590: The general uniformity of composition and lightness of plastics ensures their use in almost all industrial applications today. High performance plastics such as ETFE have become an ideal building material due to its high abrasion resistance and chemical inertness. Notable buildings that feature it include: the Beijing National Aquatics Center and the Eden Project biomes. Building papers and membranes are used for many reasons in construction. One of

SECTION 60

#1732855893018

5642-603: The health of occupants. Indoor particulate matter can come from different indoor sources or be created as secondary aerosols through indoor gas-to-particle reactions. They can also be outdoor particles that enter indoors. These indoor particles vary widely in size, ranging from nanomet (nanoparticles/ultrafine particles emitted from combustion sources) to micromet (resuspensed dust). Particulate matter can also be produced through cooking activities. Frying produces higher concentrations than boiling or grilling and cooking meat produces higher concentrations than cooking vegetables. Preparing

5733-513: The indoor air. Air pollutants can enter a building in many ways, including through open doors or windows. Poorly maintained air conditioners/ventilation systems can harbor mold, bacteria, and other contaminants, which are then circulated throughout indoor spaces, contributing to respiratory problems and allergies. There have been many debates among indoor air quality specialists about the proper definition of indoor air quality and specifically what constitutes "acceptable" indoor air quality. IAQ

5824-620: The large surface to volume ratios found indoors. Outdoor air used for ventilation may have sufficient ozone to react with common indoor pollutants as well as skin oils and other common indoor air chemicals or surfaces. Particular concern is warranted when using "green" cleaning products based on citrus or terpene extracts, because these chemicals react very quickly with ozone to form toxic and irritating chemicals as well as fine and ultrafine particles . Ventilation with outdoor air containing elevated ozone concentrations may complicate remediation attempts. The WHO standard for ozone concentration

5915-563: The main indoor source of carbon dioxide (CO 2 ) in most buildings. Indoor CO 2 levels are an indicator of the adequacy of outdoor air ventilation relative to indoor occupant density and metabolic activity. Indoor CO 2 levels above 500 ppm can lead to higher blood pressure and heart rate, and increased peripheral blood circulation. With CO 2 concentrations above 1000 ppm cognitive performance might be affected, especially when doing complex tasks, making decision making and problem solving slower but not less accurate. However, evidence on

6006-519: The main sources of indoor CO emission come from cooking and heating devices that burn fossil fuels and are faulty, incorrectly installed or poorly maintained. Appliance malfunction may be due to faulty installation or lack of maintenance and proper use. In low- and middle-income countries the most common sources of CO in homes are burning biomass fuels and cigarette smoke. Health effects of CO poisoning may be acute or chronic and can occur unintentionally or intentionally ( self-harm ). By depriving

6097-471: The material is not as durable as advertised. The cost of materials should be taken into consideration to bear the risk to buy combustive materials to enlarge the lifetime. It is said that, "if it must be done, it must be done well". Pollution costs can be macro and micro. The macro, environmental pollution of extraction industries building materials rely on such as mining, petroleum, and logging produce environmental damage at their source and in transportation of

6188-891: The material. Several studies have shown that increasing the amount of these plant particles increases porosity, moisture buffering capacity, and maximum absorbed water content on the one side, while decreasing density, thermal conductivity, and compressive strength on the other. Plant-based materials are largely derived from renewable resources and mainly use co-products from agriculture or the wood industry. When used as insulation materials, most bio-based materials exhibit (unlike most other insulation materials) hygroscopic behaviour, combining high water vapour permeability and moisture regulation. Brush structures are built entirely from plant parts and were used in primitive cultures such as Native Americans and pygmy peoples in Africa. These are built mostly with branches, twigs and leaves, and bark, similar to

6279-456: The measurement of hydration characteristics of a cement-aggregate mix; the comparison of the mechanical properties of cement-aggregate mixes and the visual assessment of microstructural properties of the wood-cement mixes. It has been found that the hydration test by measuring the change in hydration temperature with time is the most convenient method. Recently, Karade et al. have reviewed these methods of compatibility assessment and suggested

6370-407: The modern culture. Glass " curtain walls " can be used to cover the entire facade of a building, or it can be used to span over a wide roof structure in a " space frame ". These uses though require some sort of frame to hold sections of glass together, as glass by itself is too brittle and would require an overly large kiln to be used to span such large areas by itself. Glass bricks were invented in

6461-435: The most acutely toxic indoor air contaminants is carbon monoxide (CO), a colourless and odourless gas that is a by-product of incomplete combustion . Carbon monoxide may be emitted from tobacco smoke and generated from malfunctioning fuel burning stoves (wood, kerosene, natural gas, propane) and fuel burning heating systems (wood, oil, natural gas) and from blocked flues connected to these appliances. In developed countries

6552-592: The most commonly reported cases of Legionellosis. More than one case has involved outdoor fountains at public attractions. The presence of Legionella in commercial building water supplies is highly under-reported, as healthy people require heavy exposure to acquire infection. Legionella testing typically involves collecting water samples and surface swabs from evaporative cooling basins, shower heads, faucets/taps, and other locations where warm water collects. The samples are then cultured and colony forming units (cfu) of Legionella are quantified as cfu/liter. Legionella

6643-734: The number of deaths in 2017 at 1.6 million. For health reasons it is crucial to breathe clean air, free from chemicals and toxicants as much as possible. It is estimated that humans spend approximately 90% of their lifetime indoors and that indoor air pollution in some places can be much worse than that of the ambient air. Various factors contribute to high concentrations of pollutants indoors, ranging from influx of pollutants from external sources, off-gassing by furniture, furnishings including carpets, indoor activities (cooking, cleaning, painting, smoking, etc. in homes to using office equipment in offices), thermal comfort parameters such as temperature, humidity, airflow and physio-chemical properties of

6734-621: The oldest building papers is red rosin paper which was known to be in use before 1850 and was used as an underlayment in exterior walls, roofs, and floors and for protecting a jobsite during construction. Tar paper was invented late in the 19th century and was used for similar purposes as rosin paper and for gravel roofs . Tar paper has largely fallen out of use supplanted by asphalt felt paper . Felt paper has been supplanted in some uses by synthetic underlayments, particularly in roofing by synthetic underlayments and siding by housewraps . Indoor air pollution Indoor air quality ( IAQ )

6825-416: The potential loss of competition in the aggregates, asphalt, cement and ready mix concrete markets, some of their assets should be sold. In November 2012, Lafarge and Anglo American agreed to the sale of £285 million worth of British assets to Mittal Investments. In December 2012, Anglo American's Tarmac unit became Hope Ready Mixed Concrete Limited, whilst Lafarge's assets became Hope Cement Limited. The deal

6916-553: The purchase in August 2015. In January 2018, Tarmac bought £160m turnover Welsh civil engineering contractor Alun Griffiths (Contractors). Building material In history, there are trends in building materials from being natural to becoming more human-made and composite ; biodegradable to imperishable; indigenous (local) to being transported globally; repairable to disposable; chosen for increased levels of fire-safety, and improved seismic resistance. These trends tend to increase

7007-438: The raw materials, manufacturing, transportation of the products, retailing, and installation. An example of the micro aspect of pollution is the off-gassing of the building materials in the building or indoor air pollution . Red List building materials are materials found to be harmful. Also the carbon footprint , the total set of greenhouse gas emissions produced in the life of the material. A life-cycle analysis also includes

7098-603: The released spores. Legionnaires' disease is caused by a waterborne bacterium Legionella that grows best in slow-moving or still, warm water. The primary route of exposure is through the creation of an aerosol effect, most commonly from evaporative cooling towers or showerheads. A common source of Legionella in commercial buildings is from poorly placed or maintained evaporative cooling towers, which often release water in an aerosol which may enter nearby ventilation intakes. Outbreaks in medical facilities and nursing homes, where patients are immuno-suppressed and immuno-weak, are

7189-413: The rest of the world, and continue to be built, though on a smaller scale. Some of these buildings have remained habitable for hundreds of years. Mud-bricks , also known by their Spanish name adobe are ancient building materials with evidence dating back thousands of years BC. Compressed earth blocks are a more modern type of brick used for building more frequently in industrialized society since

7280-411: The results. A large fraction of the bacteria found in indoor air and dust are shed from humans. Among the most important bacteria known to occur in indoor air are Mycobacterium tuberculosis , Staphylococcus aureus , Streptococcus pneumoniae . Viruses can also be a concern for indoor air quality. During the 2002–2004 SARS outbreak , virus-laden aerosols were found to have seeped into bathrooms from

7371-516: The sale in July 2015, and the acquisition by CRH completed the following month. Following the purchase, Lafarge Tarmac was rebranded as Tarmac. In February 2011, Anglo American and Lafarge announced their intention to merge their British construction materials businesses, excluding Lafarge's gypsum activities. In September 2011, the proposed transaction was referred to the Competition Commission by

7462-502: The structure, a vibrator is used to eliminate any air that has been entrained when the liquid concrete mix is poured around the ironwork. Concrete has been the predominant building material in the modern age due to its longevity, formability, and ease of transport. Recent advancements, such as insulating concrete forms , combine the concrete forming and other construction steps (installation of insulation). All materials must be taken in required proportions as described in standards. The tent

7553-600: The structure. Social costs are injury and health of the people producing and transporting the materials and potential health problems of the building occupants if there are problems with the building biology. Globalization has had significant impacts on people both in terms of jobs, skills, and self-sufficiency are lost when manufacturing facilities are closed and the cultural aspects of where new facilities are opened. Aspects of fair trade and labor rights are social costs of global building material manufacturing. Bio-based materials (especially plant-based materials) are used in

7644-672: The surface through interaction with ozone. In both cases, these delayed emissions can result in chronic and low-level exposures to VOCs. Several initiatives aim to reduce indoor air contamination by limiting VOC emissions from products. There are regulations in France and in Germany, and numerous voluntary ecolabels and rating systems containing low VOC emissions criteria such as EMICODE, M1, Blue Angel and Indoor Air Comfort in Europe, as well as California Standard CDPH Section 01350 and several others in

7735-479: The tap, evaluating facility design layout, removing faucet aerators, and periodic testing in suspect areas. There are many bacteria of health significance found in indoor air and on indoor surfaces. The role of microbes in the indoor environment is increasingly studied using modern gene-based analysis of environmental samples. Currently, efforts are under way to link microbial ecologists and indoor air scientists to forge new methods for analysis and to better interpret

7826-535: The timber frames. Snow and occasionally ice, were used by the Inuit peoples for igloos and snow is used to build a shelter called a quinzhee . Ice has also been used for ice hotels as a tourist attraction in northern climates. Clay based buildings usually come in two distinct types. One being when the walls are made directly with the mud mixture, and the other being walls built by stacking air-dried building blocks called mud bricks . Other uses of clay in building

7917-439: The use of power tools . Volatile organic compounds (VOCs) include a variety of chemicals, some of which may have short- and long-term adverse health effects. There are numerous sources of VOCs indoors, which means that their concentrations are consistently higher indoors (up to ten times higher) than outdoors. Some VOCs are emitted directly indoors, and some are formed through the subsequent chemical reactions that can occur in

8008-554: The use of ventilation to dilute contaminants are the primary methods for improving indoor air quality. Although ventilation is an integral component of maintaining good indoor air quality, it may not be satisfactory alone. In scenarios where outdoor pollution would deteriorate indoor air quality, other treatment devices such as filtration may also be necessary. IAQ is evaluated through collection of air samples, monitoring human exposure to pollutants, analysis of building surfaces, and computer modeling of air flow inside buildings. IAQ

8099-557: Was an aggregates to construction company dating from 1903. It was demerged in July 1999, with the Construction and Professional services arms forming Carillion plc. The aggregates and building materials side of the business retained the Tarmac name and was bought by Anglo American shortly afterwards. In February 2015, Lafarge announced that the business would be sold to CRH plc , once Anglo American had sold its stake. Anglo American completed

8190-605: Was completed in January 2013 with the creation of Hope Construction Materials . The merger was completed in March 2013, following receipt of necessary approvals from the Competition Commission. Lafarge Tarmac bought Tarmac Building Products from Anglo American in April 2014. Also in April 2014, Lafarge announced it was merging with Switzerland-based cement giant Holcim Ltd., to form the world's largest cement producer, LafargeHolcim. Three months later, in July 2014, Anglo American advised it

8281-432: Was selling its 50% interest to Lafarge SA for £885 million ($ 1.5 billion), in part to allow the merger to clear regulatory hurdles. In February 2015, Lafarge announced it had reached an agreement to sell the company to CRH plc , with the exception of its Cauldon cement plant. Anglo American sold its 50% stake to Lafarge first, for £992 million ($ 1.55 billion), in order to allow CRH to buy the complete business. CRH completed

#17982