73-410: The Full-Scale Tunnel (abbreviated FST , also known as the 30-by 60-Foot Tunnel ) was a wind tunnel at NASA 's Langley Research Center . It was a National Historic Landmark . In 1929, National Advisory Committee for Aeronautics began construction of the world's first full-scale wind tunnel, where high-performance airplane would be tested. The design team was led by Smith J. DeFrance. The tunnel
146-505: A whirling arm apparatus to determine drag and did some of the first experiments in aviation theory. Sir George Cayley (1773–1857) also used a whirling arm to measure the drag and lift of various airfoils. His whirling arm was 5 feet (1.5 m) long and attained top speeds between 10 and 20 feet per second (3 to 6 m/s). Otto Lilienthal used a rotating arm to accurately measure wing airfoils with varying angles of attack , establishing their lift-to-drag ratio polar diagrams, but
219-681: A Handbook of the Baltimore City Building Laws was published. It served as the building code for four years. Very soon, a formal building code was drafted and eventually adopted in 1908. The structural failure of the tank that caused the Great Molasses Flood of 1919 prompted the Boston Building Department to require engineering and architectural calculations be filed and signed. U.S. cities and states soon began requiring sign-off by registered professional engineers for
292-828: A National Building Code, which serves as model code proving guidelines for regulating building construction activity. The purpose of building codes is to provide minimum standards for safety, health, and general welfare including structural integrity, mechanical integrity (including sanitation, water supply, light, and ventilation), means of egress, fire prevention and control, and energy conservation. Building codes generally include: Building codes are generally separate from zoning ordinances, but exterior restrictions (such as setbacks) may fall into either category. Designers use building code standards out of substantial reference books during design. Building departments review plans submitted to them before construction, issue permits [or not] and inspectors verify compliance to these standards at
365-505: A centrifugal blower in 1897, and determined the drag coefficients of flat plates, cylinders and spheres. Danish inventor Poul la Cour applied wind tunnels in his process of developing and refining the technology of wind turbines in the early 1890s. Carl Rickard Nyberg used a wind tunnel when designing his Flugan from 1897 and onwards. In a classic set of experiments, the Englishman Osborne Reynolds (1842–1912) of
438-483: A factor), and so is not directly useful for accurate measurements. The air moving through the tunnel needs to be relatively turbulence-free and laminar . To correct this problem, closely spaced vertical and horizontal air vanes are used to smooth out the turbulent airflow before reaching the subject of the testing. Due to the effects of viscosity , the cross-section of a wind tunnel is typically circular rather than square, because there will be greater flow constriction in
511-497: A flexible strip. The strip is attached to the aerodynamic surface with tape, and it sends signals depicting the pressure distribution along its surface. Pressure distributions on a test model can also be determined by performing a wake survey , in which either a single pitot tube is used to obtain multiple readings downstream of the test model, or a multiple-tube manometer is mounted downstream and all its readings are taken. The aerodynamic properties of an object can not all remain
584-440: A local council. The main purpose of building codes is to protect public health , safety and general welfare as they relate to the construction and occupancy of buildings and structures — for example, the building codes in many countries require engineers to consider the effects of soil liquefaction in the design of new buildings. The building code becomes law of a particular jurisdiction when formally enacted by
657-405: A pair of fans driven by 4,000 hp (3,000 kW) electric motors. The layout was a double-return, closed-loop format and could accommodate many full-size real aircraft as well as scale models. The tunnel was eventually closed and, even though it was declared a National Historic Landmark in 1995, demolition began in 2010. Until World War II, the world's largest wind tunnel, built in 1932–1934,
730-417: A tube, and air is blown around it to study the interaction between the object and the moving air. They are used to test the aerodynamic effects of aircraft , rockets , cars , and buildings . Different wind tunnels range in size from less than a foot across, to over 100 feet (30 m), and can have air that moves at speeds from a light breeze to hypersonic velocities. Usually, large fans move air through
803-431: A wind tunnel type of test during an actual flight in order to refine the computational model. Where external turbulent flow is present, CFD is not practical due to limitations in present-day computing resources. For example, an area that is still much too complex for the use of CFD is determining the effects of flow on and around structures, bridges, and terrain. The most effective way to simulative external turbulent flow
SECTION 10
#1732851340349876-405: Is blown or sucked through a duct equipped with a viewing port and instrumentation where models or geometrical shapes are mounted for study. Typically the air is moved through the tunnel using a series of fans. For very large wind tunnels several meters in diameter, a single large fan is not practical, and so instead an array of multiple fans are used in parallel to provide sufficient airflow. Due to
949-523: Is for understanding exhaust gas dispersion patterns for hospitals, laboratories, and other emitting sources. Other examples of boundary layer wind tunnel applications are assessments of pedestrian comfort and snow drifting. Wind tunnel modeling is accepted as a method for aiding in green building design. For instance, the use of boundary layer wind tunnel modeling can be used as a credit for Leadership in Energy and Environmental Design (LEED) certification through
1022-561: Is included in the Code of Hammurabi , which dates from circa 1772 BC. The book of Deuteronomy in the Hebrew Bible stipulated that parapets must be constructed on all houses to prevent people from falling off. In the Chinese book of rites it mentions that ancestral temples and houses should be a certain standard length in ancient China they measured land in the chu or well field system so it
1095-416: Is particularly important in open cockpit race cars such as Indycar and Formula One. Excessive lift forces on the helmet can cause considerable neck strain on the driver, and flow separation on the back side of the helmet can cause turbulent buffeting and thus blurred vision for the driver at high speeds. The advances in computational fluid dynamics (CFD) modelling on high-speed digital computers has reduced
1168-409: Is through the use of a boundary layer wind tunnel. There are many applications for boundary layer wind tunnel modeling. For example, understanding the impact of wind on high-rise buildings, factories, bridges, etc. can help building designers construct a structure that stands up to wind effects in the most efficient manner possible. Another significant application for boundary layer wind tunnel modeling
1241-475: Is used. Model building codes have no legal status unless adopted or adapted by an authority having jurisdiction. The developers of model codes urge public authorities to reference model codes in their laws, ordinances, regulations, and administrative orders. When referenced in any of these legal instruments, a particular model code becomes law. This practice is known as 'adoption by reference'. When an adopting authority decides to delete, add, or revise any portions of
1314-584: The Eurocode: Basis of structural design , is a pan-European building code that has superseded the older national building codes. Each country now has National Annexes to localize the contents of the Eurocodes . Similarly, in India , each municipality and urban development authority has its own building code, which is mandatory for all construction within their jurisdiction. All these local building codes are variants of
1387-654: The Great Fire of London in 1666, which had been able to spread so rapidly through the densely built timber housing of the city, the Rebuilding of London Act was passed in the same year as the first significant building regulation. Drawn up by Sir Matthew Hale , the Act regulated the rebuilding of the city, required housing to have some fire resistance capacity and authorised the City of London Corporation to reopen and widen roads. The Laws of
1460-660: The National Research Council of Canada . In the United Kingdom, compliance with Building Regulations is monitored by building control bodies , either Approved Inspectors or Local Authority Building Control departments. Building Control regularisation charges apply in case work is undertaken which should have had been inspected at the time of the work if this was not done. The practice of developing, approving, and enforcing building codes varies considerably among nations. In some countries building codes are developed by
1533-520: The University of Manchester demonstrated that the airflow pattern over a scale model would be the same for the full-scale vehicle if a certain flow parameter were the same in both cases. This factor, now known as the Reynolds number , is a basic parameter in the description of all fluid-flow situations, including the shapes of flow patterns, the ease of heat transfer, and the onset of turbulence. This comprises
SECTION 20
#17328513403491606-417: The static pressure , and (for compressible flow only) the temperature rise in the airflow. The direction of airflow around a model can be determined by tufts of yarn attached to the aerodynamic surfaces. The direction of airflow approaching a surface can be visualized by mounting threads in the airflow ahead of and aft of the test model. Smoke or bubbles of liquid can be introduced into the airflow upstream of
1679-413: The 1960s, wind tunnel testing began to receive widespread adoption for automobiles , not so much to determine aerodynamic forces in the same way as an airplane, but to increase the fuel efficiency of vehicles by reducing the aerodynamic drag. In these studies, the interaction between the road and the vehicle plays a significant role, and this interaction must be taken into consideration when interpreting
1752-596: The Indies were passed in the 1680s by the Spanish Crown to regulate the urban planning for colonies throughout Spain's worldwide imperial possessions. The first systematic national building standard was established with the London Building Act of 1844. Among the provisions, builders were required to give the district surveyor two days' notice before building, regulations regarding the thickness of walls, height of rooms,
1825-519: The U.S. Green Building Council. Wind tunnel tests in a boundary layer wind tunnel allow for the natural drag of the Earth's surface to be simulated. For accuracy, it is important to simulate the mean wind speed profile and turbulence effects within the atmospheric boundary layer. Most codes and standards recognize that wind tunnel testing can produce reliable information for designers, especially when their projects are in complex terrain or on exposed sites. In
1898-459: The United States as part of the plan to exploit German technology developments. For limited applications, computational fluid dynamics (CFD) can supplement or possibly replace the use of wind tunnels. For example, the experimental rocket plane SpaceShipOne was designed without any use of wind tunnels. However, on one test, flight threads were attached to the surface of the wings, performing
1971-403: The United States, many wind tunnels have been decommissioned from 1990 to 2010, including some historic facilities. Pressure is brought to bear on remaining wind tunnels due to declining or erratic usage, high electricity costs, and in some cases the high value of the real estate upon which the facility sits. On the other hand, CFD validation still requires wind-tunnel data, and this is likely to be
2044-584: The above, however, that they were simply using the accepted technology of the day, though this was not yet a common technology in America. In France , Gustave Eiffel (1832–1923) built his first open-return wind tunnel in 1909, powered by a 67 hp (50 kW) electric motor, at Champs-de-Mars, near the foot of the tower that bears his name. Between 1909 and 1912 Eiffel ran about 4,000 tests in his wind tunnel, and his systematic experimentation set new standards for aeronautical research. In 1912 Eiffel's laboratory
2117-484: The air standing still and an aircraft moving, an object would be held still and the air moved around it. In this way, a stationary observer could study the flying object in action, and could measure the aerodynamic forces acting on it. The development of wind tunnels accompanied the development of the airplane. Large wind tunnels were built during World War II, and as supersonic aircraft were developed, supersonic wind tunnels were constructed to test them. Wind tunnel testing
2190-400: The airstream to show the path that air takes around the object. Or, small threads can be attached to specific parts to show the airflow at those points. The earliest wind tunnels were invented towards the end of the 19th century, in the early days of aeronautical research, as part of the effort to develop heavier-than-air flying machines. The wind tunnel reversed the usual situation. Instead of
2263-631: The answers out of a wind tunnel." In 1941 the US constructed one of the largest wind tunnels at that time at Wright Field in Dayton, Ohio. This wind tunnel starts at 45 feet (14 m) and narrows to 20 feet (6.1 m) in diameter. Two 40-foot (12 m) fans were driven by a 40,000 hp electric motor. Large scale aircraft models could be tested at air speeds of 400 mph (640 km/h). During WWII, Germany developed different designs of large wind tunnels to further their knowledge of aeronautics. For example,
Full-Scale Wind Tunnel - Misplaced Pages Continue
2336-450: The appropriate governmental or private authority. Building codes are generally intended to be applied by architects , engineers , interior designers , constructors and regulators but are also used for various purposes by safety inspectors , environmental scientists , real estate developers , subcontractors, manufacturers of building products and materials, insurance companies, facility managers, tenants , and others. Codes regulate
2409-624: The building will collapse. Determining such forces was required before building codes could specify the required strength of such buildings and these tests continue to be used for large or unusual buildings. Wind tunnel testing was first applied to automobiles as early as the 1920s, on cars such as the Rumpler Tropfenwagen , and later the Chrysler Airflow . Initially, automakers would test out scale models of their cars, but later, full scale automotive wind tunnels were built. Starting in
2482-546: The case for the foreseeable future. Studies have been done and others are underway to assess future military and commercial wind tunnel needs, but the outcome remains uncertain. More recently an increasing use of jet-powered, instrumented unmanned vehicles, or research drones, have replaced some of the traditional uses of wind tunnels. The world's fastest wind tunnel as of 2019 is the LENS-X wind tunnel, located in Buffalo, New York. Air
2555-478: The central scientific justification for the use of models in wind tunnels to simulate real-life phenomena. However, there are limitations on conditions in which dynamic similarity is based upon the Reynolds number alone. The Wright brothers ' use of a simple wind tunnel in 1901 to study the effects of airflow over various shapes while developing their Wright Flyer was in some ways revolutionary. It can be seen from
2628-428: The corners of a square tunnel that can make the flow turbulent. A circular tunnel provides a smoother flow. The inside facing of the tunnel is typically as smooth as possible, to reduce surface drag and turbulence that could impact the accuracy of the testing. Even smooth walls induce some drag into the airflow, and so the object being tested is usually kept near the center of the tunnel, with an empty buffer zone between
2701-426: The cost of new housing to some extent, including through conflicting code between different administrators. Proposed improvements include regular review and cost-benefit analysis of building codes, promotion of low-cost construction materials and building codes suitable to mass production, reducing bureaucracy, and promoting transparency. Building codes have a long history. The earliest known written building code
2774-537: The country have chosen to adopt model codes instead. For example, in 2008 New York City abandoned its proprietary 1968 New York City Building Code in favor of a customized version of the International Building Code . The City of Chicago remains the only municipality in America that continues to use a building code the city developed on its own as part of the Municipal Code of Chicago . In Europe,
2847-403: The demand for wind tunnel testing, but has not completely eliminated it. Many real-world problems can still not be modeled accurately enough by CFD to eliminate the need for physical tests in wind tunnels. Air velocity and pressures are measured in several ways in wind tunnels. Air velocity through the test section is determined by Bernoulli's principle . Measurement of the dynamic pressure ,
2920-579: The design and construction of structures where adopted into law. Examples of building codes began in ancient times. In the USA the main codes are the International Building Code or International Residential Code [IBC/IRC] , electrical codes and plumbing, mechanical codes. Fifty states and the District of Columbia have adopted the I-Codes at the state or jurisdictional level. In Canada, national model codes are published by
2993-414: The direction of smoke from a ship's stack, to whether a given airplane would fly. Progress at Aachen, I felt, would be virtually impossible without a good wind tunnel. When von Kármán began to consult with Caltech he worked with Clark Millikan and Arthur L. Klein. He objected to their design and insisted on a return flow making the device "independent of the fluctuations of the outside atmosphere". It
Full-Scale Wind Tunnel - Misplaced Pages Continue
3066-416: The end of the war, Germany had at least three different supersonic wind tunnels, with one capable of Mach 4.4 (heated) airflows. A large wind tunnel under construction near Oetztal , Austria would have had two fans directly driven by two 50,000 horsepower hydraulic turbines . The installation was not completed by the end of the war and the dismantled equipment was shipped to Modane , France in 1946 where it
3139-473: The first enclosed wind tunnel in 1871. Once this breakthrough had been achieved, detailed technical data was rapidly extracted by the use of this tool. Wenham and his colleague John Browning are credited with many fundamental discoveries, including the measurement of l/d ratios, and the revelation of the beneficial effects of a high aspect ratio . Konstantin Tsiolkovsky built an open-section wind tunnel with
3212-402: The government agencies or quasi-governmental standards organizations and then enforced across the country by the central government . Such codes are known as the national building codes (in a sense they enjoy a mandatory nationwide application). In other countries, where the power of regulating construction and fire safety is vested in local authorities , a system of model building codes
3285-407: The materials used in repairs, the dividing of existing buildings and the placing and design of chimneys , fireplaces and drains were to be enforced and streets had to be built to minimum requirements. The Metropolitan Buildings Office was formed to regulate the construction and use of buildings throughout London. Surveyors were empowered to enforce building regulations, which sought to improve
3358-544: The model code adopted, it is usually required by the model code developer to follow a formal adoption procedure in which those modifications can be documented for legal purposes. There are instances when some local jurisdictions choose to develop their own building codes. At some point in time all major cities in the United States had their own building codes. However, due to ever increasing complexity and cost of developing building regulations, virtually all municipalities in
3431-414: The object and the tunnel walls. There are correction factors to relate wind tunnel test results to open-air results. Building code A building code (also building control or building regulations ) is a set of rules that specify the standards for construction objects such as buildings and non-building structures . Buildings must conform to the code to obtain planning permission , usually from
3504-431: The pressure at each hole. Pressure distributions can more conveniently be measured by the use of pressure-sensitive paint , in which higher local pressure is indicated by lowered fluorescence of the paint at that point. Pressure distributions can also be conveniently measured by the use of pressure-sensitive pressure belts , a recent development in which multiple ultra-miniaturized pressure sensor modules are integrated into
3577-588: The same for a scaled model. However, by observing certain similarity rules, a very satisfactory correspondence between the aerodynamic properties of a scaled model and a full-size object can be achieved. The choice of similarity parameters depends on the purpose of the test, but the most important conditions to satisfy are usually: In certain particular test cases, other similarity parameters must be satisfied, such as e.g. Froude number . English military engineer and mathematician Benjamin Robins (1707–1751) invented
3650-403: The sheer volume and speed of air movement required, the fans may be powered by stationary turbofan engines rather than electric motors. The airflow created by the fans that is entering the tunnel is itself highly turbulent due to the fan blade motion (when the fan is blowing air into the test section – when it is sucking air out of the test section downstream, the fan-blade turbulence is not
3723-411: The site during construction. There are often additional codes or sections of the same building code that have more specific requirements that apply to dwellings or places of business and special construction objects such as canopies, signs, pedestrian walkways, parking lots , and radio and television antennas . Building codes have been criticized for contributing to housing crisis and increasing
SECTION 50
#17328513403493796-512: The standard of houses and business premises, and to regulate activities that might threaten public health. In 1855 the assets, powers and responsibilities of the office passed to the Metropolitan Board of Works . The City of Baltimore passed its first building code in 1891. The Great Baltimore Fire occurred in February 1904. Subsequent changes were made that matched other cities. In 1904,
3869-426: The test model, and their path around the model can be photographed (see particle image velocimetry ). Aerodynamic forces on the test model are usually measured with beam balances , connected to the test model with beams, strings, or cables. The pressure distributions across the test model have historically been measured by drilling many small holes along the airflow path, and using multi-tube manometers to measure
3942-556: The test results. In the real world, the vehicle is moving while the road and air are stationary. In a wind tunnel test, the road must also be moved past a vehicle along with air being blown around it. This has been accomplished with moving belts under the test vehicle to simulate the moving road, and very similar devices are used in wind tunnel testing of aircraft take-off and landing configurations. Sporting equipment has also studied in wind tunnels, including golf clubs, golf balls, bobsleds, cyclists, and race car helmets. Helmet aerodynamics
4015-653: The tunnel including the Harrier jump jet fighter, the F-16 , the American supersonic transport , the Space Shuttle and Lunar Landing Test Vehicle . During the 1950s and 1960s, the tunnel was modified and upgraded several times. The principal improvement was adding the ability to test free-flying scale models in the test throat. The wind tunnel was in use through the 2000s, testing procedures such as free-flight and high angle of attack. It
4088-459: The wind stream is upwards for the testing of models in spin situations and the concepts and engineering designs for the first primitive helicopters flown in the US. Later research into airflows near or above the speed of sound used a related approach. Metal pressure chambers were used to store high-pressure air which was then accelerated through a nozzle designed to provide supersonic flow. The observation or instrumentation chamber ("test section")
4161-404: The wind tunnel at Peenemünde was a novel wind tunnel design that allowed for high-speed airflow research, but brought several design challenges regarding constructing a high-speed wind tunnel at scale. However, it successfully used some large natural caves which were increased in size by excavation and then sealed to store large volumes of air which could then be routed through the wind tunnels. By
4234-516: The wind tunnel, while the object being tested is held stationary. The object can be an aerodynamic test object such as a cylinder or an airfoil, an individual component of an aircraft, a small model of the vehicle, or, in the largest tunnels, even a full-sized vehicle. Different measurements can be taken from these tests. The aerodynamic forces on the entire object can be measured, or on individual components of it. The air pressure at different points can be measured with sensors. Smoke can be introduced into
4307-565: The world at that time at the Washington Navy Yard. The inlet was almost 11 feet (3.4 m) in diameter and the discharge part was 7 feet (2.1 m) in diameter. A 500 hp (370 kW) electric motor drove the paddle type fan blades. In 1931 the NACA built a 30 by 60 feet (9.1 by 18.3 m) full-scale wind tunnel at Langley Research Center in Hampton, Virginia. The tunnel was powered by
4380-545: Was Theodore von Kármán 's teacher at Göttingen University and suggested the construction of a wind tunnel for tests of airships they were designing. The vortex street of turbulence downstream of a cylinder was tested in the tunnel. When he later moved to Aachen University he recalled use of this facility: I remembered the wind tunnel in Göttingen was started as a tool for studies of Zeppelin behavior, but that it had proven to be valuable for everything else from determining
4453-454: Was an arrangement followed by a number of wind tunnels later built; in fact the open-return low-speed wind tunnel is often called the Eiffel-type wind tunnel. Subsequent use of wind tunnels proliferated as the science of aerodynamics and discipline of aeronautical engineering were established and air travel and power were developed. The US Navy in 1916 built one of the largest wind tunnels in
SECTION 60
#17328513403494526-513: Was completed in 1930 and used for Northrop Alpha testing. In 1939 General Arnold asked what was required to advance the USAF, and von Kármán answered, "The first step is to build the right wind tunnel." On the other hand, after the successes of the Bell X-2 and prospect of more advanced research, he wrote, "I was in favor of constructing such a plane because I have never believed that you can get all
4599-498: Was completed in 1931 (dedicated 27 May) at a cost just under $ 900,000. It was a double-return tunnel capable of moving air at speeds up to 118 miles/hour (190 km/h) through its circuit. It had a 30 ft by 60 ft (9.1 m x 18.3 m) open throat, which is capable of testing aircraft with spans of 40 ft (12.2 m). The wind tunnel was a double-return, atmospheric pressure tunnel with two fans powered by 4,000 hp electric motors. The Vought O3U-1 biplane observation airplane
4672-488: Was considered of strategic importance during the Cold War for development of aircraft and missiles. Other problems are also studied with wind tunnels. The effects of wind on man-made structures need to be studied when buildings became tall enough to be significantly affected by the wind. Very tall buildings present large surfaces to the wind, and the resulting forces have to be resisted by the building's internal structure or else
4745-529: Was declared a National Historic Landmark in 1985. However, despite this designation and the efforts of some aviation historians, demolition of the tunnel began in 2010. It was documented before its demolition, with the fan blades being salvaged for display. In 2014 its landmark designation was withdrawn and it was removed from the National Register of Historic Places. Wind tunnel Wind tunnels are machines in which objects are held stationary inside
4818-465: Was important to be precise though most of the actual lengths are lost or obscure. In ancient Japan a certain official destroyed a courtiers house because the size was above his rank. In Paris, under the reconstruction of much of the city under the Second Empire (1852–70) , great blocks of apartments were erected and the height of buildings was limited by law to five or six stories at most. After
4891-542: Was lacking the notions of induced drag and Reynolds numbers . However, the whirling arm does not produce a reliable flow of air impacting the test shape at a normal incidence. Centrifugal forces and the fact that the object is moving in its own wake mean that detailed examination of the airflow is difficult. Francis Herbert Wenham (1824–1908), a Council Member of the Aeronautical Society of Great Britain , addressed these issues by inventing, designing and operating
4964-451: Was located in a suburb of Paris, Chalais-Meudon , France. It was designed to test full-size aircraft and had six large fans driven by high powered electric motors. The Chalais-Meudon wind tunnel was used by ONERA under the name S1Ch until 1976 in the development of, e.g., the Caravelle and Concorde airplanes. Today, this wind tunnel is preserved as a national monument. Ludwig Prandtl
5037-412: Was moved to Auteuil, a suburb of Paris, where his wind tunnel with a two-metre test section is still operational today. Eiffel significantly improved the efficiency of the open-return wind tunnel by enclosing the test section in a chamber, designing a flared inlet with a honeycomb flow straightener and adding a diffuser between the test section and the fan located at the downstream end of the diffuser; this
5110-425: Was poured on 22 June 1942 on a site that eventually would become Calspan , where the wind tunnel still operates. By the end of World War II, the US had built eight new wind tunnels, including the largest one in the world at Moffett Field near Sunnyvale, California, which was designed to test full size aircraft at speeds of less than 250 mph (400 km/h) and a vertical wind tunnel at Wright Field, Ohio, where
5183-465: Was re-erected and is still operated there by the ONERA . With its 26 ft (8 m) test section and airspeed up to Mach 1, it is the largest transonic wind tunnel facility in the world. Frank Wattendorf reported on this wind tunnel for a US response. On 22 June 1942, Curtiss-Wright financed construction of one of the nation's largest subsonic wind tunnels in Buffalo, NY. The first concrete for building
5256-460: Was the first complete airplane tested in the tunnel. After that, it was used to test virtually every high-performance aircraft used by the United States in World War II . For much of the war, when it was operational 24 hours a day, seven days a week, the full-scale tunnel was the only tunnel in the free world large enough to perform these tests. After the war, many types of aircraft were tested in
5329-543: Was then placed at the proper location in the throat or nozzle for the desired airspeed. In the United States, concern over the lagging of American research facilities compared to those built by the Germans led to the Unitary Wind Tunnel Plan Act of 1949, which authorized expenditure to construct new wind tunnels at universities and at military sites. Some German war-time wind tunnels were dismantled for shipment to
#348651