An electric multiple unit or EMU is a multiple-unit train consisting of self-propelled carriages using electricity as the motive power. An EMU requires no separate locomotive , as electric traction motors are incorporated within one or a number of the carriages. An EMU is usually formed of two or more semi-permanently coupled carriages, but electrically powered single-unit railcars are also generally classed as EMUs. The great majority of EMUs are passenger trains, but versions also exist for carrying mail.
45-720: The TCDD E8000 is a three-car electric multiple unit operated by the Turkish State Railways (TCDD) on the Istanbul suburban service. They were some of the first electric trains using the newly developed 25 kV 50 Hz AC power system. The trains are equipped with conventional transformers and camshaft-controlled step switches, with a power output of 1,100 kW (1,475 hp) and a maximum speed of 90 km/h (56 mph). A total of 28 TCDD E8000s were built by French manufacturers Alstom , Jeumont and De Dietrich Ferroviaire , with deliveries beginning in 1955. They were used on
90-404: A SIL 2 safety certification. The SDO system uses a combination of GPS and train speed integration to estimate its position and identify the station at which the train has stopped, simplifying the correct door selection sequence. For reliability, passenger doors use a relatively simple sliding pneumatic system that has already been in use for several decades on Shinkansen trains. The fleet
135-544: A 'preview' service was launched between London St Pancras and Ashford via Ebbsfleet on 18 June 2009. These were gradually expanded until the commencement of the full regular service on 13 December 2009. The use of the high-speed trains as part of the transport infrastructure for the Olympic Park formed part of the original bid for the 2012 Summer Olympics . The service was named the Olympic Javelin , which formed
180-538: A 12-car train as required. The type, which was entirely manufactured in Japan, is the first Hitachi-built rail vehicle to be sold to a European customer, as well as being the first British order for a Japanese train. The fleet was ordered during June 2005 by HSBC Rail , and was delivered to the UK between August 2007 and August 2009. Following the completion of 4,000 miles (6,400 km) fault-free running six months ahead of schedule,
225-724: A 25 kV OHL test track, and sidings for rolling stock. The design and layout of the depot, which was optimised specifically for the Class 395, enables the most efficient workflow possible, including minimal complex shunting actions, physical minimisation wherever reasonable, and in line with modern data management practices. A Class 395 train simulator supplied by Corys TESS was acquired for use at Southeastern's training centre in Ashford for driver training. Southeastern's co-parent company SNCF also assisted with high-speed driver training. The DEPCO consortium also updated Ramsgate train depot for
270-493: A limited service from Maidstone West via Strood and Gravesend started, followed in September 2011 by a limited service from Sandwich via Deal to London St Pancras (partially subsidised by Kent County Council ). In 2013, four years after the service started, total passenger numbers were ten million and punctuality was 92.6% (compared to 90.1% nationwide). The 400 Series Mini Shinkansen and Hitachi's A Train design form
315-524: A new maintenance depot building at Ashford and the updating of the existing depot site. The new Ashford Depot was constructed on the site of the Ashford Down Yard Carriage Sidings, and formally opened on 2 October 2007. The facility included a five-track trainshed with bogie drop made by BBM and train lifting equipment from Mechan. A second building housed a wheel lathe from Sculfort. Other facilities included carriage washing plant,
360-486: A public vote. Following the 2012 Olympics and Paralympics , Southeastern announced that another 12 units would be named after members of Team GB , including Alistair Brownlee , Ed Clancy , Hannah Cockroft , Jessica Ennis , Mo Farah , Jason Kenny , Jonnie Peacock , Victoria Pendleton , Ellie Simmonds , Dame Sarah Storey , Laura Trott , and David Weir . Some units have subsequently received other names. In 2009 Hornby Railways launched two model versions of
405-413: A separate contract involving the upgrade of existing Class 465 and 466 EMUs. The contract was also the first British order for a Japanese train; as such, Hitachi viewed the deal as a key opportunity to establish itself in the UK market. Hitachi took the design from its 885 series A-train in particular. The design pedigree can be traced back to the 400 Series Shinkansen from 1992. Construction of
450-713: Is currently being refurbished at a cost of £27 million. New carpets, lighting, customer information and digital media screens and USB sockets are being installed. Panels and seat grab handles are being repainted and seat covers are being replaced. A mockup Class 395 unit was named after athlete Dame Kelly Holmes ; the name was subsequently transferred to an operational unit and 11 other "fast Britons" – Jamie Staff , Steve Backley , Sir Steve Redgrave , Rebecca Adlington , Sir Chris Hoy , Ben Ainslie , Daley Thompson , Duncan Goodhew , Katherine Grainger , Lord Sebastian Coe , and Dame Tanni Grey-Thompson ; all Olympic/Paralympic medallists – were selected in
495-790: Is larger and designed to be universally accessible . The seats are mostly arranged 'airline' style, though there are also a small number of table seats present in each car. Nearly all seats feature flip-down tables and coat hooks, while a single electrical socket has been provided for each pair of seats. The interior design and layout is in conformance with the Rail Vehicle Accessibility Regulations 2010 . The trains meet UK Railway Group Standards (RGS), and European Union Technical Specifications for Interoperability (TSI) standards for crashworthiness , and UK or EU standards for structure-load-bearing behaviour, material strength, aerodynamics, noise and fire resistance. Key areas of
SECTION 10
#1732854573159540-582: The Budd Metroliner . EMUs powered by fuel cells are under development. If successful, this would avoid the need for an overhead line or third rail . An example is Alstom ’s hydrogen -powered Coradia iLint . The term hydrail has been coined for hydrogen-powered rail vehicles. Many battery electric multiple units are in operation around the world, with the take up being strong. Many are bi-modal taking energy from onboard battery banks and line pickups such as overhead wires or third rail. In most cases
585-617: The Department for Transport announced Govia as the new operator of the IKF. The contract was Hitachi's first rail vehicle sold to a European customer. The company had previously worked with HSBC Rail and UK rail authorities between 2002 and 2003 to demonstrate that the company's traction system was suitable for use on the Great Britain rail network, including testing asynchronous AC motors and confirming electromagnetic compatibility , as part of
630-467: The North Kent line as well. Even during the preview service, the Class 395 presented several performance improvements in comparison to conventional rolling stock, including its high rate of acceleration, lower noise levels (primarily attributed to its air conditioning arrangements), and its aesthetic appeal. Railway journalist Richard Clinnick observed several minor shortcomings of the interior, such as
675-487: The South Eastern franchise . The whole fleet is operated by Southeastern . The Class 395 can operate at a maximum speed of 140 mph (225 km/h) under 25 kV AC overhead electrification on High Speed 1, and 100 mph (160 km/h) on 750 V DC third rail supply on conventional lines. It is typically formed as a six-car train, although they can be rapidly coupled to one another to form
720-605: The South Side Elevated Railroad (now part of the Chicago 'L' ) in 1897. In 1895, derived from his company's invention and production of direct current elevator control systems, Frank Sprague invented a multiple unit controller for electric train operation. This accelerated the construction of electric traction railways and trolley systems worldwide. Each car of the train has its own traction motors: by means of motor control relays in each car energized by train-line wires from
765-548: The CTRL (High Speed 1) was complete in November 2007. By 2008, the initially planned 'CTRL Domestic' services (2003) from London St Pancras to Gravesend, and Canterbury West and Folkestone Central, via Ashford, had been expanded in scope to include services to Medway Towns, East Kent and Dover. Furthermore, a 29th train was added to the order agreement by franchise holder Southeastern so as to provide additional capacity. The contract for
810-553: The Class 395 comprises 16 electric motors each rated to produce 210 kW (280 hp) that work in conjunction with four IGBT converter/inverter units. In combination with its braking system, it can achieve a peak acceleration rate of 0.7 m/s (2.3 ft/s ) and a normal maximum deceleration rate of 0.9 m/s (3.0 ft/s ), although the latter can be elevated to 1.2 m/s (3.9 ft/s ) under emergency circumstances. The train uses an electrically operated air brake system, supplied by Faiveley . Approximately 40% of
855-562: The Class 395 has its carbody (walls, roof, floor) formed from friction stir welded (FSW) double-walled hollow extruded aluminium body panels, a technology that Hitachi Rail considers to be a part of its A-Train train family specification. The manufacturer claims that the FSW approach achieves minimal strain while providing a lightweight and high strength carbody in comparison to conventional techniques. Each Class 395 unit contains six cars, formed DPT1-MS1-MS2-MS3-MS4-DPT2. The intermediate cars carry
900-455: The IKF with facilities including storage sidings for the Class 395 trains and light maintenance facilities. Pre-shipping factory tests included static and dynamic load tests, traction and braking tests, including tests on a 750 V DC third-rail system specially installed at Hitachi's test track. This round of manufacturer tests included the use of supercomputers to conduct both simulations and verification tests. The first train
945-477: The Integrated Kent franchise (IKF). In October 2004, Hitachi was announced as the preferred bidder to supply high-speed trains for the CTRL services. During June 2005, a contract valued at £250 million was signed with Hitachi Europe to supply 28 units, with Eversholt Rail Group acting as the financier ( ROSCO ); at this point, the new fleet had an expected service date of 2009. In November 2005,
SECTION 20
#1732854573159990-539: The UK in August 2009, with the final train delivered to Southeastern on 11 December 2009. The performance metric of 4,000 miles (6,400 km) fault-free running was achieved six months ahead of schedule, clearing the way for a 'preview' service to be offered between London St Pancras and Ashford via Ebbsfleet. On 18 June 2009, these were ceremonially launched by the Secretary of State for Transport Andrew Adonis , although
1035-448: The ancillary equipment required per set) while allowing all cars to be powered, unlike a motor-trailer combination. Each car has only one control cab, located at the outer end of the pair, saving space and expense over a cab at both ends of each car. Disadvantages include a loss of operational flexibility, as trains must be multiples of two cars, and a failure on a single car could force removing both it and its partner from service. Some of
1080-414: The basis of the Class 395 design. From the 400 Series the class inherits the same six-car trains with 20-metre (65 ft 7 in) carriages, but with two doors per side placed one-third and two-thirds along the carriage instead. Both types of train are designed for operations at high speed on newly built lines, as well as at lower speed on conventional legacy lines. Unlike the steel-bodied 400 Series,
1125-539: The batteries are charged via the electric pickup when operating on electric mode. EMUs, when compared with electric locomotives , offer: Electric locomotives, when compared to EMUs, offer: British Rail Class 395 The British Rail Class 395 Javelin is a dual-voltage electric multiple unit (EMU) passenger train built by Hitachi Rail as part of the Hitachi A-train AT300 family for high-speed commuter services on High Speed 1 and elsewhere on
1170-497: The entire length of High Speed 1 (starting in Ashford) had timetabled journeys reduced by around 45 minutes. However, the service has been criticised as being of limited use to many London commuters because trains terminate at St Pancras. Additionally, the change in service patterns to accommodate high-speed trains resulted in some non-high-speed services in Kent becoming slower. In May 2011,
1215-441: The extra equipment needed to transmit electric power to the train can be difficult. Multiple unit train control was first used in the 1890s. The Liverpool Overhead Railway opened in 1893 with two-car electric multiple units, controllers in cabs at both ends directly controlling the traction current to motors on both cars. The multiple unit traction control system was developed by Frank Sprague and first applied and tested on
1260-399: The front car all of the traction motors in the train are controlled in unison. The cars that form a complete EMU set can usually be separated by function into four types: power car, motor car, driving car, and trailer car. Each car can have more than one function, such as a motor-driving car or power-driving car. On third rail systems, the outer vehicles usually carry the pick up shoes with
1305-437: The issue. A full regular service commenced on 13 December 2009. Initial services included a half-hourly north Kent service to and from St Pancras, London, via Stratford, Ebbsfleet, Gravesend, Strood, Rochester, Chatham, Gillingham, Rainham, and Sittingbourne to Faversham, a half-hourly service to East Kent via Stratford, Ebbsfleet, Ashford with one train continuing to Margate via Canterbury West, Ramsgate and Broadstairs, with
1350-780: The more famous electric multiple units in the world are high-speed trains: the Italian Pendolino and Frecciarossa 1000 , Shinkansen in Japan, the China Railway High-speed in China, ICE 3 in Germany, and the British Rail class 395 Javelin. The retired New York–Washington Metroliner service, first operated by the Pennsylvania Railroad and later by Amtrak , also featured high-speed electric multiple-unit cars, known as
1395-624: The motor vehicles receiving the current via intra-unit connections . Many modern two-car EMU sets are set up as twin or "married pair" units. While both units in a married pair are typically driving motors, the ancillary equipment (air compressor and tanks, batteries and charging equipment, traction power and control equipment, etc.) are shared between the two cars in the set. Since neither car can operate without its "partner", such sets are permanently coupled and can only be split at maintenance facilities. Advantages of married pair units include weight and cost savings over single-unit cars (due to halving
TCDD E8000 - Misplaced Pages Continue
1440-575: The newly electrified European commuter train service in Istanbul. After the Asian side electrification, the trains also served there. They were lengthened to four cars with locally manufactured intermediate cars, which were later withdrawn. The original livery was dark-red and white. On 1 September 2010 the arrival of new trains was cut in 2011 after waiting for 6 months. Electric multiple unit EMUs are popular on commuter, and suburban rail networks around
1485-515: The origin of the Javelin nickname. The Olympic services began 28 July 2012. Furthermore, the Class 395 has also been irregularly operated for charter services – though the first such uses did not happen until after the 2012 Olympics due to a lack of free units. In December 2003, formal approval was given by the Strategic Rail Authority for domestic services to be run on
1530-498: The other to Dover via Folkestone West and Folkestone Central. Seven million journeys were made in the first year of operation. The introduction of the trains was generally successful, with good reliability and passenger satisfaction figures. The new high-speed services also caused an increase in passenger numbers above that already being experienced on the Kent network. On introduction, timetabled journeys to London from Ebbsfleet were reduced from 51 to 18 minutes, whilst trains using
1575-442: The preview service only became available to general passengers on 29 June. The preview service allowed for further train testing under real-world conditions, during which the type reportedly achieved a 99% punctuality rate in the first month of operations. In September 2009, preliminary services were launched to the Kent coast (Dover via Folkestone, and Ramsgate via Canterbury). During November 2009, preview services commenced on
1620-441: The somewhat cramped seating arrangement and the lack of securing straps at the baby changing facility, but positively reviewed the overall package. In September 2010, it was reported that several passengers were concerned by the presence of a 'wobbling' motion that occurred within some tunnel sections; the phenomenon was described by Southeastern as non-dangerous, but all trains were fitted with dampers that prevent any recurrence of
1665-411: The traction motors - one at each axle - while the unpowered outer cars carry the pantographs. The bogies are bolsterless, with both powered and unpowered bogies sharing a common design to simplify maintenance. Each six-car unit can work in multiple with another to create 12-car trains. The coupling process is automated and has been designed to take less than 60 seconds. The propulsion system of
1710-534: The train's components were sourced from suppliers within the European Union . Each six-car train is fitted with 340 seats in 2+2 formation, all standard class, with an additional twelve tip-up priority seats located in an indicated wheelchair area near the vestibules of the DPT1 vehicle. There is no separation between the vestibules and the main interior save for wind shields. There are two toilets per unit, one of which
1755-454: The train's design that were heavily influenced by these standards were its fireproofing measures and crashworthiness approach, which Hitachi observed to bear considerable differences with their corresponding Japanese standards. In addition to the applicable standards, the Class 395 was greatly shaped by the various criteria specified by the customer. Wherever it has been beneficial to do so, the various technologies and new approaches developed for
1800-487: The trains included maintenance of the trains; according to Hitachi, the maintenance techniques and schedules of which being initially generated from experience of their Shinkansen cousins in Japan. Maintenance services are provided via a consortium, referred to as 'DEPCO', which included HSBC Rail (finance), Fitzpatrick Contractors Ltd (construction), RPS Burks Green (architects/civil engineers), EMCOR UK (mechanical and electrical plant) and GrantRail (trackwork) constructed
1845-483: The type have been incorporated by Hitachi back into its main product lines. Each train is equipped with a computer-based Train Management System (TMS), which incorporates numerous monitoring systems, communications, environmental controls, and enables the train crew to control various onboard systems, including Selective Door Operation (SDO). The TMS features considerable redundancy, which has enabled it to obtain
TCDD E8000 - Misplaced Pages Continue
1890-441: The under-construction Channel Tunnel Rail Link (CTRL) in Kent, England, which has since been rebranded as High Speed 1 (HS1). Preliminary consultations for a new franchise including the envisioned 'CTRL Domestic' services along with new rolling stock for operating the said services, which were to begin in 2004. In 2005, the proposed high-speed services were combined with those from the former South Eastern rail franchise to form
1935-459: The world due to their fast acceleration and pollution-free operation, and are used on most rapid-transit systems. Being quieter than diesel multiple units (DMUs) and locomotive -hauled trains, EMUs can operate later at night and more frequently without disturbing nearby residents. In addition, tunnel design for EMU trains is simpler as no provision is needed for exhausting fumes, although retrofitting existing limited-clearance tunnels to accommodate
1980-452: Was delivered from Japan to Southampton Docks on 23 August 2007. Days later, it was unveiled by Secretary of State for Transport Ruth Kelly at a media event held at Hitachi's new Ashford maintenance facility. Following the delivery of the first four units in March 2008, production was temporarily put on hold while these units were subjected to extensive UK-based testing. Homologation testing
2025-593: Was undertaken by Serco . SNCF International assisted with testing of KVB and TVM 430 signalling systems, with speeds of 240 km/h (150 mph) attained in January 2008. Following the successful completion of these tests, production and shipping of the main production tranche commenced in December 2008. Each train was required to demonstrate 5,000 mi (8,000 km) of fault-free operations prior to their acceptance by Southeastern. The final three trains arrived in
#158841