Misplaced Pages

#340659

127-524: The Denver Zephyr was a streamlined passenger train operated by the Chicago, Burlington and Quincy Railroad between Chicago, Illinois , and Denver, Colorado . In peak years it ran to Colorado Springs. It operated from 1936 to 1973. The Denver Zephyr continued operating after the Burlington Northern Railroad merger in 1970. BN conveyed the train to Amtrak in 1971; Amtrak merged it with

254-409: A coach and a baggage car , but the combination of coach and post office car was also common. Combines were used most frequently on branch lines and short line railroads where there wasn't necessarily enough traffic to economically justify single-purpose cars. As lightweight cars began to appear on railroads, passenger cars more frequently combined features of two or more car types on one car, and

381-582: A 1,200-+-900-horsepower (890 + 670 kW) cab/booster locomotive pulling nine cars of the same form. Automotive-styled cab/booster locomotive sets with 1,200-horsepower (890 kW) engines powered the Union Pacific's City of San Francisco and City of Denver sets. The two City of Denver sets started service two cars shorter than the M-10002 and M-10004 sets, with roomier and heavier straight-sided cars. The Union Pacific's initial streamliner service to

508-450: A booster with one V-16 of 1,200 horsepower (890 kW) for a total rating of 3000. These were bodied by Budd in shotwelded stainless steel, and designated 9906A/B "Silver King and Silver Queen" and 9907A/B "Silver Knight/Silver Princess". The train ran 1,034 miles (1,664 km) between Denver and Chicago overnight in 16 to 16½ hours. Within two years a dinette coach and an all-room sleeper were added. The trainsets were refurbished in

635-434: A car through a door at the end of the car which led to a narrow platform. Steps on either side of the platform were used for getting on or off the train, and one might hop from one car platform to another. Later cars had enclosed platforms called vestibules which together with gangway connections allowed passengers not only to enter and exit the train protected from the elements, but also to move more easily between cars with

762-498: A choice is given between first- and second-class carriages , with a premium being paid for the former. In some countries, such as the UK, coaching stock that is designed, converted or adapted to not carry passengers, is referred to as "NPCS" (non-passenger coaching stock); similarly, in the US, some maintenance (engineering) stock can be known as "MOW" (maintenance of way). Up until about the end of

889-417: A food and drink counter. Lounge cars are an important part of the appeal of passenger trains when compared to aircraft, buses and cars; there is more space to move around, socialize, eat and drink, and a good view. The observation car almost always operated as the last car in a passenger train, in US practice. Its interior could include features of a coach, lounge, diner, or sleeper. The main spotting feature

1016-600: A fuel similar to kerosene. The two trainsets were star attractions at the 1934 World's Fair (" A Century of Progress ") in Chicago, Illinois . During its set's demonstration period, the Union Pacific named the M-10000 as the Streamliner , providing the first use of the term with respect to trains. The Streamliner ' s publicity tour in February–May 1934 attracted over a million visitors and gained attention in national media as

1143-634: A full diner, offered a Vista-dome coffee shop car called the Chuckwagon . Parlor seats continued to be available in the observation car. Because of the popularity of the Denver-Chicago segment of the Vista-dome California Zephyr , the new train also carried Vista-Domes. In addition, a new all room sleeping accommodation, the slumbercoach , offered private sleeping facilities, with in-room washstand and toilet, to passengers at coach fares plus

1270-684: A home in North America on some short and medium distance routes such as Eugene, Oregon , to Vancouver, British Columbia . Another type of tilting train that is seeing widespread use across Europe is the Pendolino . These trains, built by Fiat Ferroviaria (now owned by Alstom ), are in regular service in Italy , Portugal , Slovenia , Finland , Czech Republic and the United Kingdom . Using tilting trains, railroads are able to run passenger trains over

1397-626: A longer service time between runs, the car ran only to Denver and a dome coach was substituted for the Chicago-Colorado Springs coach. On January 1, 1967, the Colorado Springs section was replaced by a bus connection. Though the number of cars were reduced during the off-season, the train ran mostly intact until September 7, 1968, when the Chuckwagon became seasonal and the observation car, with its flat end and rear-diaphragm, became

SECTION 10

#1732851587341

1524-715: A midtrain lounge during the off season. The train name was retained by Amtrak in May 1971. One consist of Denver Zephyr cars was sold to the Saudi Railways Organization , where it operated and subsequently went into storage in a yard in Eastern Saudi Arabia. Amtrak took over in 1971 and decided to run the Denver Zephyr daily between Chicago and Denver. The Denver and Rio Grande Western Railway declined to join Amtrak, so

1651-740: A more streamlined nose than do previous TGVs. In 2015, Eurostar began to operate the electric multiple unit (EMU) British Rail Class 374 , also known as the Eurostar e320, on its high-speed services through the Channel Tunnel . The train serves destinations beyond Eurostar's core routes to the Gare du Nord station in Paris and the Brussels-South railway station . Owned by Eurostar International Limited and capable of operating at 320 km/h (199 mph),

1778-467: A new streamlined California Zephyr carrying Vista-domes in 1949. Both of these trains took passengers from the DZ, but ridership remained respectable. But the train's consist — semi-articulated with a unique braking, steam connection system that was incompatible with other standard equipment — meant that cars could not be added to the train proper, but had to be added ahead of the baggage car or as

1905-492: A portion of the interior partitioned off for a galley , which is off-limits to passengers. A narrow hallway is left between the galley and one side wall of the car for passengers to use. The remainder of the interior is laid out with tables and chairs to look like a long, narrow restaurant dining room. There are special personnel to perform waitstaff and kitchen duties. Lounge cars carry a bar and public seating. They usually have benches, armchairs or large swivelling chairs along

2032-569: A rounded front that could run either singly or in multiple-unit sets, capable of speeds over 90 mph (145 km/h). Although Depression -era economics cut into sales, the design was highly successful in service, lasting into the 1980s. In 1925, the recently-formed Pullman Car & Manufacturing Corporation experimented with lightweight self-propelled railcars in co-operation with the Ford Motor Company concurrent with Ford's development of its Trimotor aircraft. In 1931, Pullman enlisted

2159-404: A rounded rear and round porthole style windows in a style that was as much nautically as aerodynamically inspired. The McKeen cars were unsuccessful because the internal combustion drive technology for that application was unreliable at the time. Further, the lightweight frames dictated by the cars' limited power tended to break. Streamlined rail motorcars would appear again in the early 1930s after

2286-573: A separate section. These cars needed their own food service, compromising the economics of adding the additional cars. The Burlington decided in 1955 to reequip the train with more conventional non-articulated equipment. Thus was conceived the last complete streamlined train to be built for a private railroad in the United States. The new stainless steel train, also built by the Budd Company, offered all room sleeping accommodations and, in addition to

2413-531: A side corridor to connect individual compartments along the body of the train, each with two rows of seats facing each other. In both arrangements carry-on baggage is stowed on a shelf above the passenger seating area. The opening into the cars is usually located at both ends of the carriage, often into a small hallway – which in railway parlance is termed a vestibule . Earlier designs of UK coaching stock had additional door or doors along their length, some supporting compartmentalised carriages. The compartment coach

2540-719: A single manufacturer and usually of a uniform design (although the dining car on the German ICE 1 has a dome). In the 1960s and 1970s countries around the world started to develop trains capable of traveling in the 150–200 mph range, to rival air travel. One of the first was France 's TGV which entered service in 1981. By 2000, Western Europe's major cities ( London , Paris , Brussels , Amsterdam , Geneva , Berlin , Rome , etc.) were connected by high-speed rail service. Often tilting and high-speed cars are left in "trainsets" throughout their service. For example, articulated cars cannot be uncoupled without special equipment because

2667-515: A small surcharge. These cars were revolutionary in their use of fiberglass room modules. Each train carried two and they always were sold out, even up to the beginning of Amtrak. By 1959 slumbercoaches would appear on the trains of four other railroads, although three would later give them up. Between 1959 and late 1964, CB&Q's four cars and Northern Pacific Railway ’s four cars were pooled in Denver Zephyr / North Coast Limited service. The pool required tight scheduling and good timekeeping and

SECTION 20

#1732851587341

2794-536: A streamlined style. The South Manchuria Railway , which was under Japanese control at that time, also designed the Pashina class streamlined locomotive. The Railway operated the Asia Express , whose style was coordinated with that of Pashina locomotives. These streamlined steam locomotives took many man-hours to repair due to their casing. After the outbreak of World War II , the lack of an experienced labor force made

2921-557: A streamlined style. The selected locomotive was No. 43 of class C53. However Hideo Shima , the chief engineer of the conversion, thought streamlining had no practical effect on reducing air resistance, because Japanese trains at that time did not exceed a speed of 62 mph (100 km/h). Shima therefore designed the locomotive to create airflow that lifted exhaust smoke away from the locomotive. He had expected no practical effect on reducing air resistance completely, therefore he never tried to test fuel consumption or tractive force of

3048-528: A top speed of 112.5 mph (181.1 km/h). This was the fastest authenticated speed reached by a steam locomotive at the time, making #2 the rail speed record holder for steam and the first steam locomotive to top 110 mph (180 km/h). That record lasted until a German DRG Class 05 locomotive exceeded it the following year. The Illinois Central 121 trainset was the first of the Green Diamond streamliners running between Chicago and St Louis. It

3175-521: A way that they either roll or fold out of the way or convert into seats for daytime use. Compartments vary in size; some are large enough for only a bed, while others resemble efficiency apartments including bathrooms. In China, sleeping cars still serve as major travel classes in long-range rail transport. The classes of sleeping cars include hard sleeper (YW) with six bunks per compartment, soft sleeper (RW) typically with four bunks, deluxe soft sleeper (GRW) typically with two bunks. A similar car which

3302-465: A whole and for manufacturers of motorized railcars whose primary markets, branch line services, were among the first to be cut. The interests of lightweight equipment manufacturers and rail operators therefore focused on the development of a new generation of lightweight, high speed, internal combustion-electric powered streamlined trainsets that were primarily designed for mainline service. The Chicago, Burlington & Quincy Railroad (Burlington) and

3429-443: Is a car that was normally placed between the train's motive power and the remainder of the passenger train. The car's interior is normally wide open and is used to carry passengers' checked baggage . Baggage cars were also sometimes commissioned by freight companies to haul less-than-carload (LCL) shipments along passenger routes ( Railway Express Agency was one such freight company). Some baggage cars included restroom facilities for

3556-462: Is applied to high-speed railway trainsets of the 1930s to 1950s, and to their successor " bullet trains ". Less commonly, the term is applied to fully faired upright and recumbent bicycles . As part of the Streamline Moderne trend, the term was applied to passenger cars, trucks, and other types of light-, medium-, or heavy-duty vehicles, but now vehicle streamlining is so prevalent that it

3683-547: Is not an outstanding characteristic. In land speed racing , it is a term applied to the long, slender, custom built, high-speed vehicles with enclosed wheels. The earliest known streamlined rail equipment in the United States were McKeen rail motorcars that the company built for the Union Pacific and the Southern Pacific Railroads between 1905 and 1917. Most McKeen cars sported a pointed "wind splitter" front,

3810-483: Is similar to a corridor coach but without the corridor. Each compartment is totally separated from the other compartments, with no movement between them. Entry and exit from each compartment is only possible when stopped at a station. "Composite" coaches are also known. These are mixed-class cars featuring both open seating and compartments. One such coach is the Composite Corridor , introduced for British Rail in

3937-618: Is that the passengers were expected to stand for their entire trip. The first passenger cars in the United States resembled stagecoaches . They were short, often less than 10 ft (3.05 m) long and had two axles . A British company developed the first design for sleeping carriages , called "bed-carriages", which were built in 1838 for the London and Birmingham Railway and the Grand Junction Railway . When made up for sleeping,

Denver Zephyr - Misplaced Pages Continue

4064-497: Is typically [2+2], while the hard seat in China has [3+2] arrangements. The seating arrangements and density, as well as the absence or presence of other facilities depends on the intended use – from mass transit systems to long distance luxury trains. Some cars have reclining seats to allow for easier sleeping by passengers not traveling in a sleeping car. In another variant, "closed" coaches, "corridor" coaches or "compartment" cars have

4191-664: Is used. It contains several cell compartments with minimal interior and commodities, and a separate guard compartment. Usually the windows are of nontransparent opaque glass to prevent prisoners from seeing outside and determine where they are, and windows usually also have bars to prevent escapes. Unlike other passenger cars, prisoner cars do not have doors at the ends of the wagon. Like baggage cars, railway post office (RPO; US term) cars or travelling post offices (TPOs; British term) were not accessible to paying passengers. These cars' interiors were designed with sorting facilities that were often seen and used in conventional post offices around

4318-596: The Burlington Zephyr . The two railroads' trains each entered service as three-car articulated sets (including the power car). The Winton Engine Corporation , a subsidiary of General Motors (GM) , manufactured the engines for both locomotives. The prime mover for the Burlington Zephyr' s diesel-electric propulsion was a new 600 hp diesel engine. The Union Pacific's M-10000 had a 600-horsepower (450 kW) spark-ignition engine that ran on "petroleum distillate",

4445-594: The Pioneer Zephyr in honor of that train's status as the first of the fleet. In April 1935, two Twin Cities Zephyrs that bore the same three-car configuration entered service on the railroad's Chicago and Minneapolis-St. Paul route. Larger trainsets with more powerful Winton engines were built for the Burlington and put into service over longer routes. Twin-engine power units and eventually booster power units met

4572-629: The San Francisco Zephyr on June 11, 1972. The Denver Zephyr name disappeared altogether on October 26, 1973. For several years afterward the San Francisco Zephyr carried Chicago–Denver cars. Comparable streamliners of the era also serving Denver and Colorado Springs from the Midwest: Streamliner A streamliner is a vehicle incorporating streamlining in a shape providing reduced air resistance . The term

4699-750: The Twin Cities Hiawatha run. The Hudsons could cruise above 110 mph (177 km/h) and were said to exceed 120 mph (193 km/h) on occasion. Otto Kuhler designed the Milwaukee Road's speedsters with "shovel nose" styling. Some of the class 7's details were evocative of those of the Zephyrs . Also in 1937, the Electro-Motive Corporation (EMC)—later incorporated into GM's Electro-Motive Division (EMD) —started production of streamlined diesel-electric passenger locomotives, incorporating

4826-458: The Amtrak Express brand, eventually introducing rolling stock like material handling cars, Roadrailers . Amtrak mostly exited the express business in 2003, now only using extra space in baggage cars on trains. In some countries, such as Russia, convicts are transported from court to prison or from one prison to another by railway. In such transportation a specific type of coach, prisoner car,

4953-642: The City of Denver trains. The train's cars then became spare equipment. The two City of Denver trainsets ( M–10005 and M–10006), after cannibalizing power from the M-10001 and M-10004 , remained in service until 1953. Class GG1 electric locomotives brought streamlined styling to the Pennsylvania Railroad 's fleet of electric locomotives in late 1934. Meanwhile, the Boston and Maine 's Flying Yankee , identical to

5080-589: The Denver Zephyr ' s six-cat sets to the Twin Cities Zephyr , transferring that train's original streamlined cars to other Burlington routes. The last of the classic Zephyrs was built for the Burlington's Kansas City–Saint Louis General Pershing Zephyr route. That trainset, which contained GM's newest 1,000-horsepower (750 kW) engine and conventional coupling, entered service in June 1939. The Burlington's original Zephyr trainsets remained in service in

5207-629: The ETR 401 ("Pendolino") , the ETR 450 ("Pendolino") and the ETR 500 . Streamliner service temporarily ended in the United Kingdom with the outbreak of WWII. During the war, the LNER and LMS streamlined locomotives had part of their streamlining removed to aid maintenance. By the late 1940s and early 1950s, the state of the railways was improving as deteriorated track conditions caused by delayed maintenance work were corrected. The repairs and new improvements enabled

Denver Zephyr - Misplaced Pages Continue

5334-529: The Hobart to Launceston expresses. Despite — or perhaps because of — the strategic priorities of World War II, some new streamliner locomotives were built in Australia during and immediately after the war. The first five New South Wales C38 class locomotives were modestly streamlined with distinctive conical noses, while the twelve South Australian Railways 520 class locomotives featured extravagant streamlining in

5461-422: The M-10000 as a three-car set until the railroad was retired the set in 1941. The trainset's 1942 scrapping provided Duralumin that was recycled for use in war-time military aircraft. The Union Pacific also commissioned the construction of five modified trainsets that had evolved from the initial M-10000 design. Those streamlined trains inaugurated the railroad's high-speed service out of Chicago while bearing

5588-755: The New York Central Railroad 's Ohio Xplorer and the New York, New Haven and Hartford Railroad 's Dan'l Webster . The pair were problematic and were withdrawn from service by 1960. GM 's project, originally called Train Y , was marketed as the Aerotrain . It featured a futuristic, automotive-styled EMD LWT12 diesel–electric locomotive pulling aluminum coaches adapted from GM's long-distance bus design. Two trainsets were produced in 1955 and were trialed by several railroads, but no orders were forthcoming. The two demonstration units were eventually sold to

5715-679: The Northlander until 1992. From 1961, the SBB used for TEE service the RAe TEE II , a set of five streamlined electric trains compatible with four different railway electrification systems . Italy used pre-war trains and new trains that the Italian State Railways—Ferrovie dello Stato (FS)—developed. The new trains included the FS Class ETR 250 ("Arlecchino") , the ETR 300 ("Settebello") ,

5842-543: The Portland–Seattle run until the railroad took it out of service again in March 1943. After running for 18 months as the City of San Francisco M-10004 , the locomotive spent six months being refurbished and then served from July 1938 as a second unit on the City of Los Angeles . The Union Pacific retired the locomotive in March 1939. The Union Pacific converted the M-10001 and M-10004 power units to additional boosters for

5969-609: The Railplane encouraged the railroad to increase its efforts in partnership with Pullman-Standard. In 1931, the Budd Company reached an agreement with the French tire company Michelin to produce pneumatic-tired rail motorcars in the US, as an improvement on the heavy, underpowered and shimmy-prone " doodlebugs " that ran on American tracks. In that endeavor, Budd would produce lightweight rail equipment utilizing unibody construction and

6096-551: The Rock Island Line , which was already operating an EMD LWT12 paired with Talgo II cars from ACF Industries as the Jet Rocket . Rock Island operated them in commuter service until 1966. The Speed Merchant project also produced only two examples. They consisted of Fairbanks-Morse P-12-42 locomotives paired with Talgo II cars from ACF Industries, and were used by the Boston and Maine Railroad for commuter service and by

6223-473: The aluminum trains are sixteen-unit versions of the Siemens Velaro . High-speed steam service continued in the United States after World War II, but became increasingly uneconomical. The New York Central's Super Hudsons went out of service in 1948 as the line converted to diesel for passenger service. The Milwaukee Road retired its high speed Hiawatha steam locomotives between 1949 and 1951. The last of

6350-542: The internal combustion-electric propulsion technology that General Electric developed and that the Electro-Motive Company (EMC) promoted became the accepted technology for use rail motorcars in the 1920s. Streetcar builders sought to build electric cars with improved speed for interurban lines through the 1920s. In 1931, the J. G. Brill Company introduced the Bullet , a lightweight, wind-tunnel designed car with

6477-529: The trucks . The coach is the most basic type of passenger car, also sometimes referred to as "chair cars". Two main variants exist. In one variant, an " open coach " has a central aisle; the car's interior is often filled with row upon row of seats as in a passenger airliner . Other arrangements of the "open" type are also found, including seats around tables, seats facing the aisle (often found on mass transit trains since they increase standing room for rush hour), and variations of all three. Seating arrangement

SECTION 50

#1732851587341

6604-440: The " horse cars " that were used to transport racehorses. Express cars carry high-value freight in passenger consists . These cars often resembled baggage cars, although in some cases specially-equipped boxcars or refrigerator cars were used. In the United States, the majority of these cars were operated by Railway Express Agency (REA) from 1918 to 1975. Following REA's bankruptcy, Amtrak took over express type shipments under

6731-435: The 1930s, these had an open-air platform at the rear, the "observation platform". These evolved into the closed end car, usually with a rounded end which was still called an "observation car". The interiors of observation cars varied. Many had special chairs and tables. The end platforms of all passenger cars changed around the turn of the 20th century. Older cars had open platforms between cars. Passengers would enter and leave

6858-478: The 1940s with technology that would enable the axles to steer into a curve, allowing the train to move around the curve at a higher speed. The steering axles evolved into mechanisms that would also tilt the passenger car as it entered a curve to counter the centrifugal force experienced by the train, further increasing speeds on existing track. Today, Talgo trains are used in many places in Europe and they have also found

6985-524: The 1950s, the passenger travel market declined in North America, though there was growth in commuter rail . Private intercity passenger service in the U.S. mostly ended with the creation of Amtrak in 1971. Amtrak took over equipment and stations from most of the railroads in the U.S. with intercity service. The higher clearances in North America enabled a major advancement in passenger car design, bi-level ( double-decker ) commuter coaches that could hold more passengers. These cars started to become common in

7112-416: The 1950s; though such coaches existed from early pre-grouping days, at the end of the 19th century. In India, normal carriages often have double height seating, with benches (berths), so that people can sit above one another (not unlike a bunk bed). In other countries, true double decker carriages are becoming more common. The seats in most coaches until the middle of the 20th century were usually bench seats;

7239-466: The 1956 reequipping the train also began to serve Colorado Springs . Sandwiched between the diner and the Chuckwagon, the section consisted of a coach, a slumbercoach, and a sleeper. These cars ran on the Denver and Rio Grande Railway's Royal Gorge passenger train between Denver and Colorado Springs. Initially, the Chuckwagon operated with the section on to Colorado Springs, but, by the mid-1960s, to allow

7366-582: The 19th century, most passenger cars were constructed of wood. The first passenger trains did not travel very far, but they were able to haul many more passengers for a longer distance than wagons pulled by horses . As railways were first constructed in England , so too were the first passenger cars. One of the early coach designs was the "Stanhope". It featured a roof and small holes in the floor for drainage when it rained, and had separate compartments for different classes of travel. The only problem with this design

7493-646: The Denver–Oakland City of San Francisco to form the San Francisco Zephyr and dropped the "Denver" name in 1973. The first Zephyr service to Denver began May 31, 1936, with the trainsets of the Pioneer Zephyr and the Mark Twain Zephyr , trains 9900 and 9903. This new service was known as the Advance Denver Zephyr and operated on a 16-hour schedule. The trains did not have sleepers, but introduced hostesses called " Zephyrettes ". In

7620-525: The Dutch NS procured five diesel-electric RAm TEE I (Swiss) and NS DE4 (Dutch) trainsets for Zürich - Amsterdam and Amsterdam- Brussels -Paris services. One set was lost in an accident 1971. The remaining four sets operated as TEE trains until 1974, were transferred to Canada for use on the Ontario Northland Railway (ONR) in 1976. The ONR operated three trains on its Toronto – Moosonee line as

7747-617: The New York, New Haven and Hartford Railroad's John Quincy Adams . Both were retired by 1964. In 1956, the Budd Company produced a single streamlined, lightweight, six car DMU trainset that the New York, New Haven and Hartford Railroad operated as the Roger Williams . After a short period of time in high speed service, the train was split up and the cars were used in service with the New Haven's other RDCs . The advent of jet air travel in

SECTION 60

#1732851587341

7874-654: The Pennsylvania Railroad's class K4 locomotives. In 1937, Otto Kuhler used a variation of the bullet-front design on a 4-6-2 locomotive constructed for the Baltimore & Ohio 's streamlined Royal Blue . Henry Dreyfuss used a similar variation for the J-3a Super Hudsons that pulled the 20th Century Limited and other NYC express trains. In 1937, the Milwaukee Road introduced the class F7 Hudsons on

8001-539: The Pennsylvania Railroad's short-lived T1 class locomotives went out of service in 1952. All of those iconic locomotives were scrapped. The last steam streamliners built were three Norfolk and Western class J locomotives in 1950, which operated until 1959. In 1951, the Interstate Commerce Commission implemented regulations restricting most trains to speeds of 79 mph (127 km/h) or below unless automatic train stop , automatic train control , or cab signalling were installed. The new regulations minimized one of

8128-670: The US and Canada resembled a roofed porch area. Larger windows were installed at the observation end on these cars as well. At this end of the car, there was almost always a lounge where passengers could enjoy the view as they watched the track rapidly recede into the distance. Often called "sleepers" or "Pullman cars" (after the main American operator), these cars provide sleeping arrangements for passengers travelling at night. Early models were divided into sections, where coach seating converted at night into semi-private berths. More modern interiors are normally partitioned into separate bedroom compartments for passengers. The beds are designed in such

8255-405: The Union Pacific sought to increase the efficiency of their passenger services by looking to the lightweight, petroleum-powered technology that Budd and Pullman-Standard were developing. The Union Pacific named its project the M-10000 (designated first as The Streamliner and later as the City of Salina when in revenue service from 1935 to 1941). The Burlington initially named its first train

8382-483: The United States in the 1960s, and were adopted by Amtrak for the Superliner design as well as by many other railroads and manufacturers. By 2000, double-deckers rivaled single level cars in use around the world. While intercity passenger rail travel declined in America, ridership continued to increase in other parts of the world. With the increase came an increased use of newer technology on existing and new equipment. The Spanish company Talgo began experimenting in

8509-575: The United States, the so-called "chair car" with individual seating became commonplace on long-distance routes. With the 1930s came the widespread use of stainless steel for car bodies. The typical passenger car was now much lighter than its carbon-steel cousins of old, though still much heavier than nineteenth-century wooden cars. The new "lightweight" and streamlined cars carried passengers in speed and comfort to an extent that had not been experienced to date. Aluminum and Cor-Ten steel were also used in lightweight car construction, but stainless steel

8636-399: The advantages of diesel became compelling enough for a growing number of rail lines to select diesel over steam for new passenger equipment. The power and top speed advantages of state-of-the-art steam locomotives were more than offset by diesel's advantages in service flexibility, downtime, maintenance costs and economic efficiency for most operators. The American Locomotive Company (ALCO),

8763-419: The backs of these seats could be adjusted, often with one hand, to face in either direction so the car would not have to be turned for a return trip. The conductor would simply walk down the aisle in the car, reversing the seat backs to prepare for the return trip. This arrangement is still used in some modern trains. A dining car (or diner) is used to serve meals to the passengers. Its interior may be split with

8890-422: The boiler in shrouding, streamlining of the GS-3/GS-4 series locomotives consisted of skyline casing flush with the smokestack and smoke-lifting skirting along the boiler that left the silver-painted smokebox on full display. The trend of streamliners also came to Japan. In 1934, the Ministry of Railways ( Japanese Government Railways , JGR) decided to convert one of its 3-cylinder steam locomotives class C53 into

9017-489: The builder of the Hiawatha speedsters, saw diesel as the future of passenger service and introduced streamlined locomotives influenced by the design of the E units in 1939 . The replacement of steam with diesel power was interrupted by the US entry into World War II, with a military premium on diesel technology that stopped all production of diesel locomotives for passenger service between September 1942 and January 1945. Streamlined steam locomotives continued to be produced into

9144-454: The classic heavyweight combine fell out of use. A control car (also known as a Driving Trailer in Europe and the UK) is a passenger car which lets the train be run in reverse with the locomotive at the back. It is common on commuter trains in the US, Canada and Europe. This can be important for serving small towns without extensive switching facilities, end train stations, dead-end lines, and having

9271-479: The converted locomotive. The Japanese government planned to use this one converted streamline locomotive on the passenger express route between Osaka and Nagoya. The converted locomotive gained much popularity from the public. JGR therefore decided to build 21 new streamlined versions of the class C55 locomotive . Additionally, JGR built 3 streamlined class EF55 electric locomotives. Kiha-43000 diesel multiple units and Moha-52 electric multiple units also received

9398-637: The earlier EMC 1800 hp B-B development design locomotives, the twin-engine format and multiple-unit control systems that facilitated cab/booster locomotive sets. The E-units brought sufficient power for full-sized trains such as the B&;O Capitol Limited , the Atchison, Topeka and Santa Fe Railway 's (AT&SF's) Super Chief , and the Union Pacific's upgraded City of Los Angeles and City of San Francisco , which challenged steam power in all aspects of passenger service. EMC introduced standardized production to

9525-577: The early 1800s with the advent of the first railroads, and were small and little more than converted freight cars. Early passenger cars were constructed from wood; in the 1900s construction shifted to steel and later aluminum for improved strength. Passenger cars have increased greatly in size from their earliest versions, with modern bi-level passenger cars capable of carrying over 100 passengers. Amenities for passengers have also improved over time, with developments such as lighting, heating, and air conditioning added for improved passenger comfort. In some systems

9652-542: The early postwar era. Among the most distinctive were the Pennsylvania Railroad's duplex-drive 6-4-4-6 type S1 and 4-4-4-4 type T1 locomotives that Raymond Loewy styled. In terms of service longevity, the most successful were the Southern Pacific GS-3 Daylight locomotives introduced in 1938 and the Norfolk and Western class J locomotives introduced in 1941. In contrast to designs that completely encased

9779-478: The end of October 1956 and soon eclipsed its competitor, the Union Pacific Railroad's City of Denver . As the train now had conventional equipment it could be expanded with other cars of Burlington streamlined passenger car fleet as well as leased cars. During the summer months trains of 20 or more cars were not uncommon and during that and holiday seasons, the train often split into two sections. With

9906-437: The ends of the car. Early American sleeping cars were not compartmented, but by the end of the 19th century they were. The compartments in the later sleepers were accessed from a side hall running the length of the cars, similar to the design of European cars well into the 20th century. Many American passenger trains, particularly the long distance ones, included a car at the end of the train called an observation car. Until about

10033-459: The following years. After its Worlds Fair display and a nationwide demonstration tour, the Zephyr entered revenue service between Kansas City, Missouri, and Lincoln, Nebraska, on 11 November 1934. A total of nine Zephyr trainsets were built for the Burlington between 1934 and 1939. Each ran as named trains on various Burlington midwestern routes. The Burlington later renamed the Burlington Zephyr as

10160-399: The foot of the bed was extended into a boot section at the end of the carriage. The cars were still too short to allow more than two or three beds to be positioned end to end. Britain's Royal Mail commissioned and built the first travelling post office cars in the late 1840s as well. These cars resembled coaches in their short wheelbase and exterior design, but were equipped with nets on

10287-405: The herald of a new era in rail transportation. On 26 May 1934, the Burlington's Zephyr made a record-breaking "Dawn to Dusk" run from Denver, Colorado , to Chicago for its grand entry as a Century of Progress exhibit. The Zephyr covered the distance in 13 hours, reaching a top speed of 112.5 mph (181.1 km/h) and running an average speed of 77.6 mph (124.9 km/h). The fuel for

10414-412: The high strength alloy stainless steel , enabled by shot welding , a breakthrough in electrical welding technique. The venture produced articulated power-trailer car sets with streamlined styling, which left the Budd Company just a (much) more powerful engine away from producing a history-making streamlined trainset. The Great Depression caused a catastrophic loss of business for the rail industry as

10541-470: The individual cars share trucks. This gives modern trains a smooth, coherent appearance because all the cars and often the engines share a similar design and paint scheme. Traditionally the passenger car can be split into a number of distinct types. The most basic division is between cars which do carry passengers and "head end" equipment. The latter are run as part of passenger trains, but do not themselves carry passengers. Traditionally they were put between

10668-774: The key advantages of rail travel over the automobile, which became an increasingly attractive alternative as postwar construction of highway systems progressed. Rail operators marketed their services on the basis of luxurious sightseeing, as airlines increasingly competed with rail lines for long-distance travel. In the mid-1950s, there were several attempts to revive the lightweight custom streamliner concept. None of these projects achieved any lasting impact on passenger service. The Train X project, first promoted by Robert R. Young no later than 1948, resulted in low-profile Baldwin RP-210 locomotives paired with articulated aluminum cars from Pullman-Standard . Two trainsets were built in 1956 for

10795-434: The late 1950s brought forth a new round of price competition from airlines for long-distance travel, severely affecting the ridership and profitability of long-distance passenger rail service. Government regulations forced railroads to continue to operate passenger rail service, even on long routes where, the railroads argued, it was almost impossible to make a profit. Baggage car The first passenger cars were built in

10922-590: The lightweight carbody construction and raked, rounded front end introduced with the Zephyr and the high-mounted, behind-the-nose cab of the M-1000x locomotives. One of the first, EMC's TA , was a 1,200-horsepower (890 kW) version produced for the Rock Island Rockets , a series of six lightweight, semi-articulated three and four-car trainsets. EMC/EMD manufactured streamlined E-unit diesel-electric locomotives from 1937 to 1963. These incorporated two features of

11049-591: The limitations of the locomotives' technology when meeting the demands of long-distance and higher capacity service. The M-10001 ran for only 32 months as the City of Portland before it was replaced, re-entered service on the Portland–Seattle run and retired in June 1939. Similarly, the M-10002 spent 19 months as the Union Pacific's City of Los Angeles , 39 months as the City of Portland and ten months out of service starting in July 1941. The locomotive then served on

11176-399: The locomotive and the passenger-carrying cars in the consist , hence the name. Some specialized types are variants of or combine elements of the most basic types. Also, the basic design of passenger cars is evolving, with articulated units that have shared trucks, with double-decker designs, and with the "low floor" design where the loading area is very close to the ground and slung between

11303-461: The locomotive industry, with its attendant economies of scale and simplified processes for ordering, producing and servicing locomotives. As a result, EMC was able to offer a variety of support services that decreased technological and initial cost barriers that would otherwise deter conversions to diesel-electric power. With power and reliability of new diesel-electric units improved with the 2,000-horsepower (1,500 kW) EMC E3 locomotive in 1938,

11430-531: The meals were prepared. The introduction of vestibuled cars , which for the first time allowed easy movement from car to car, aided the adoption of dining cars, lounge cars, and other specialized cars. In the early 1900s, safety concerns led the railroad industry to transition from wood to steel construction. Steel was heavier but this transition took place simultaneously with a transition to higher-powered locomotives. The Pennsylvania Railroad began building all-steel passenger cars in 1906 due to concerns about fire in

11557-807: The meantime, after the success of the 3-car and 4-car Pioneer Zephyr , Twin Zephyrs , and Mark Twain Zephyr s, the Burlington had ordered two pairs of longer stainless steel streamliners from the Budd Company . One pair was fully articulated 6-car trainsets used to replace the 3-car Twin Cities Zephyrs . The other pair were 10-car trainsets, partly articulated, which became the Chicago-Denver Denver Zephyr . Accommodations on these trains included coaches , sections, single and double rooms, and dining and lounge facilities. The observation cars carried parlor seats for local travel. On October 23, 1936, one of

11684-475: The mid-19th century, trains grew in length and weight. Passenger cars, particularly in America, grew along with them, first getting longer with the addition of a second truck (one at each end), and wider as their suspensions improved. Cars built for European use featured side door compartments, while American car design favored what was called a train coach, a single long cabin with rows of seats, with doors located at

11811-557: The multilevel semiprivate berths of old. Now that passenger cars were lighter, they were able to carry heavier loads, but the size of the average passenger that rode in them didn't increase to match the cars' new capacities. The average passenger car could not be made any wider or longer due to side clearances along the railroad lines, but they generally could get taller because they were still lower than many freight cars and locomotives. The railroads soon began building and buying dome and bilevel cars to carry more passengers. Starting in

11938-423: The names City of Portland (June 1935), City of Los Angeles (May 1936), City of San Francisco (June 1936) and City of Denver (June 1936). The M-10001 set had a single power unit that contained a 1,200-horsepower (890 kW) Winton diesel engine. The power unit pulled six tapered low-profile cars that had the form of the original three-car M-10000 trainset. The M-10002 ' s set consisted of

12065-622: The new ten-car trainsets made a special run nonstop Chicago to Denver in an effort to break the 1934 record of the Pioneer Zephyr between the two cities. The train went from Chicago to Denver in 12 hours, 12 minutes, and 27 seconds, at start-to-stop average of 83.89 miles per hour (135.01 km/h) and reached 116 miles per hour (187 km/h) between Akron and Brush in Colorado. Distance was given as 1,017.22 miles (1,637.06 km) via Plattsmouth direct to Lincoln, Nebraska , bypassing Omaha on

12192-523: The original Zephyr, entered service between Boston and Portland, Maine , on 1 April 1935. The Gulf, Mobile and Northern Railroad Rebel trainsets were similar to the Zephyr in form, but were not articulated. Designed by Otto Kuhler , the ALCO powered diesel-electrics that the American Car and Foundry Company constructed were placed into service on 10 July 1935. While streamlining on steam locomotives

12319-504: The postwar era. The railroad retired the last of its six-car sets in 1968 after using it as the Nebraska Zephyr . On 31 January 1935, the Union Pacific's three-car M-10000 went into service between Kansas City, Missouri , and Salina, Kansas , as The Streamliner . The train subsequently became the City of Salina under the railroad's naming convention for its expanding fleet of diesel-powered streamliners. The Union Pacific operated

12446-467: The problems worse. As a result, many of the locomotives had their casings removed. Streamliner locomotives arrived relatively late in Australia. In 1937 streamlined casings were fitted on four Victorian Railways S class locomotives for the Spirit of Progress service between Melbourne and Albury . Similar casings were then fitted on two Tasmanian Government Railways R class narrow-gauge locomotives for

12573-458: The railways to provide additional mainline trackage for high speed trains. The first experiments with diesel streamliner services in the United Kingdom were the Blue Pullman trains introduced in 1960 and withdrawn in 1973. These provided 90-mile-per-hour (140 km/h) luxury business services, but were marginally successful and ran only a little faster than mainstream services. The Blue Pullman

12700-459: The regular route of the train. The new trainsets went into regular service 16 days later, November 8, 1936, replacing the trainsets used on the route since May. Power for the new trainsets came from the General Motors' Electro-Motive Division . Each was led by a twin-engine forerunner to the E series featuring two Winton V-12 201-A diesels of 900 horsepower (670 kW) each, articulated to

12827-485: The run cost US$ 14.64 at 4¢ per U.S. gallon (equivalent to $ 333 and $ 9 per gallon respectively in 2023 after inflation). The Burlington's event was covered live on radio and drew large, cheering crowds as the "silver streak" zipped by. Adding to the sensation of the Zephyr were the striking appearance of its fluted stainless steel bodywork and its raked, rounded, aerodynamic front end that symbolized its modernity. The train's design echoed in steam locomotive styling throughout

12954-606: The same tracks at higher speeds than would otherwise be possible. Amtrak continued to push the development of U.S.-designed passenger equipment even when the market demand didn't support it, ordering a number of new passenger locomotive and car types in the 1980s and 1990s. However, by 2000 Amtrak went to European manufacturers for the Amtrak Cascades ( Talgo ) and Acela Express trains, their premier services. These trains use new designs and are made to operate as coherent "trainsets". High-speed trains are made up of cars from

13081-455: The same protection. Dining cars first appeared in the late 1870s and into the 1880s. Until this time, the common practice was to stop for meals at restaurants along the way (which led to the rise of Fred Harvey 's chain of Harvey House restaurants in America). At first, the dining car was simply a place to serve meals that were picked up en route, but they soon evolved to include galleys in which

13208-720: The services of the Trimotor design contributor William Bushnell Stout to apply airplane fuselage design concepts to railcars. The result was the Railplane (not the Bennie Railplane ), a streamlined self-propelled railcar with a tapered cross-section, lightweight tubular aluminum space frame and duralumin skin. In testing with the Gulf, Mobile and Northern Railroad in 1932, it reportedly reached 90 mph (145 km/h). The Union Pacific had been seeking improvements to self-propelled railcars based on European design ideas. The performance of

13335-461: The set in 1950. The visual styling of the new trainsets made the existing fleets of locomotives and railcars suddenly look obsolete. Rail lines soon responded by adding streamlined shrouding and varying degrees of mechanical improvement to older locomotives and re-styling heavyweight cars. The first American steam locomotive to receive that treatment was one of the New York Central Railroad 's (NYC's) J-1 Hudson class locomotives built in 1930, which

13462-495: The sides of the car. They often have small tables for drinks, or may be large enough to play cards. Some lounge cars include small pianos and are staffed by contracted musicians to entertain the passengers. These cars are often pulled in addition to the dining car , and on very long trains in addition to one or more snack or café cars. Café cars , such as the Amtrak café cars , are simpler, lacking window-facing seats, instead, rows of tables with facing pairs of bench seats, split by

13589-477: The sides of the cars to catch mail bags while the train was in motion. American RPOs , first appearing in the 1860s, also featured equipment to catch mail bags at speed, but the American design more closely resembled a large hook that would catch the mailbag in its crook. When not in use, the hook would swivel down against the side of the car to prevent it from catching obstacles. As locomotive technology progressed in

13716-568: The speed record that the first DMU "Flying Hamburger" had set 1933 traveling between Hamburg and Berlin. A TGV high-speed test train set a world record for the fastest wheeled train, reaching 575 km/h (357 mph) in 2007. Conventional TGV services operate at up to 322 km/h (200 mph) on the LGV Est , LGV Rhin-Rhône and LGV Méditerranée . The power cars of the TGV Euroduplex (2N2) , which began commercial operations in 2011, have

13843-629: The style of the Pennsylvania Railroad 's T1 . In all cases, the streamlining on Australian steam locomotives were purely aesthetic, with negligible impacts on train speeds. In Europe, the streamliner tradition gained new life after World War II . In Germany, DRG Class SVT 137 trains resumed service, but at slower speeds than before the war. Based on the Kruckenberg SVT 137, the Deutsche Bundesbahn 's (DB's) streamlined diesel-electric Class VT 11.5 (later renamed to DB Class 601) built in 1957

13970-586: The train crew, so many baggage cars had doors to access them just like any other passenger car. Baggage cars could be designed to look like the rest of a passenger train's cars, or they could be repurposed box cars equipped with high-speed trucks and passenger train steam and air connections. A special type of baggage car came equipped with doors on one end to facilitate transport of large pieces of equipment and scenery for Broadway shows and other productions. These "theatrical" baggage cars were assigned theatrical names (i.e. Romeo and Juliet ), and were similar to

14097-578: The trainsets' additional power requirements. The Burlington's four-car Mark Twain Zephyr entered revenue service in October 1935 on the railroad's Saint Louis– Burlington, Iowa , route. Two partially-articulated six-car trainsets entered service in May 1936 on the Burlington's Denver Zephyr route, which connected Chicago and Denver. The Burlington then replaced those sets with a pair of partially-articulated ten-car trainsets in November 1936. The Burlington moved

14224-407: The tri-weekly Union Pacific/ Southern Pacific City of San Francisco was diverted from Cheyenne into Denver for combination with the Zephyr to Chicago. During the summer of 1971 the City and the Zephyr ran as separate sections (on the same schedule) between Denver and Chicago; after that summer the two trains were combined on the days the City ran. Amtrak renamed the City of San Francisco

14351-530: The tunnels it was building to access Manhattan's Pennsylvania Station, which opened in 1910. Other railroads followed because steel cars were safer in accidents. During a transition period, some railroads put steel frames underneath wooden cars. By the 1920s, passenger cars on the larger standard gauge railroads were normally between 60 ft (18.3 m) and 70 ft (21.3 m) long. The cars of this time were still quite ornate, many of them being built by experienced coach makers and skilled carpenters. In

14478-471: The west coast consisted of five runs monthly for each route. The railroad maintained its daily overnight service on the Chicago–Denver run by assigning three locomotive sets for two trains. The railroad then augmented that stable with locomotive equipment taken from other runs. Despite the breakthrough schedule times of the long-distance M-1000x "City" trains, the records of the Union Pacific's fleet reflected

14605-567: The winter of 1948–49 and operated in DZ service until October 1956 when they were reassigned to the Denver–Fort Worth/Dallas Texas Zephyr route on Burlington subsidiaries Colorado and Southern and Fort Worth and Denver Railways . Around 1953 Union Pacific began reequipping its competing City of Denver . In addition, the Burlington, Denver and Rio Grande Western , and Western Pacific Railroads had replaced their heavyweight Chicago-Oakland Exposition Flyer with

14732-530: The world. The RPO is where mail was sorted while the train was en route. Because these cars carried mail, which often included valuables or quantities of cash and checks, the RPO staff (who were employed by the postal service and not the railroad) were the only train crews allowed to carry guns. The RPO cars were normally placed in a passenger train between the train's motive power and baggage cars, further inhibiting their access by passengers. A colonist car or emigrant car

14859-597: Was a five-unit (including power car) articulated trainset for day service. The Pullman-built set had the same power format and 1,200-horsepower (890 kW) Winton diesel engine as M-10001, with some style aspects that resembled the later M1000x trainsets. The Illinois Central ran the 121 trainset on the Green Diamond from May 1936 to 1947. After an overhaul, the railroad placed the set on the Jackson Mississippi–New Orleans run until it retired and scrapped

14986-403: Was a special sleeping car designed to take immigrants from ocean ports to settlement areas in western North America at the cheapest possible fare. They offered simple sleeping berths and a cooking area for immigrants who were expected to bring their own food and bedding. A combine is a car that combines features of a head-end and a regular passenger car. The most common combination is that of

15113-481: Was at the tail end of the car – some more modern US designs had walls of the car usually curved together to form a large U shape, and larger windows were installed all around the end of the car; earlier designs had square ends with an observation open deck (preserved stock in Southern Africa, Oceania and many countries elsewhere.) Before these cars were built with steel walls, the observation end of heavyweight cars in

15240-403: Was discontinued when NP acquired eight additional slumbercoaches second-hand. Even though only 18 of these revolutionary cars were built new, they remained popular, even after operation of rail passenger service was assumed by Amtrak, and carried passengers until the mid-1990s, when age and changes in passenger car requirements forced their retirement. The second Denver Zephyr began operation at

15367-541: Was followed by research into streamlined trains and tilting trains , the first to enter passenger service, in 1976, being the diesel powered InterCity 125 ( Class 43 ), followed by the electric, tilting, British Rail Class 370 , and Class 91 , in combination offering 125 mph (201 km/h) streamlined train services across the United Kingdom. High-speed service with the electric German ICE 1 (Class 401) began in 1991. The train, which has traveled at speeds of up to 280 km/h (174 mph) in revenue service, broke

15494-422: Was more about marketing than performance, newly designed locomotives with state-of-the-art steam technology were able to travel at high speeds. The Milwaukee Road class A Atlantics , built in 1935 to compete with the Twin Cities Zephyr , were the first "steamliners" equipped to back up their styled claim to extra speed. In a 15 May 1935 run by locomotive No. 2 and a dynamometer car, the railroad documented

15621-521: Was re-introduced with streamlined shrouding and named the Commodore Vanderbilt in December 1934. The Vanderbilt styling was a one-off design by Carl Kantola. The NYC's next venture in streamlined styling was Henry Dreyfuss ' 1936 full-length exterior and interior design of the railroad's Mercury trainsets. Raymond Loewy also designed in 1936 art-deco shrouding with a bullet-front scheme for

15748-437: Was sectioned off into compartments, much like the coaches that were still in widespread use across Europe. Pullman's roomettes, however, were designed with a single traveller in mind. The roomette featured a large picture window, a privacy door, a single fold-away bed, a sink and a small toilet. The roomette's floor space was barely larger than the space taken up by the bed, but it allowed the traveller to ride in luxury compared to

15875-472: Was the preferred material for car bodies. Stainless steel cars could be and often were, left unpainted except for the car's reporting marks that were required by law. By the end of the 1930s, railroads and car builders were debuting car body and interior styles that could only be dreamed of before. In 1937, the Pullman Company delivered the first cars equipped with roomettes – that is, the car's interior

16002-594: Was used as the " Trans Europ Express (TEE)" for international high-speed trains. From 1965, the DB used the streamlined electric locomotives DB Class 103 with regular trains for high-speed service. From 1973, the DB used the DB Class 403 , a fully streamlined four-unit electric train with tilting technology. In East Germany, the DR Class VT 18.16  [ de ] was built for international express service. The Swiss SBB and

16129-516: Was usually found in DMUs , EMUs , and locomotive -hauled passenger trainsets . They also generally intermediate cars within the consist and sometimes have driving control facilities . They may carry auxiliary equipment (E.g. the braking system, air conditioning, etc.) where space is limited. Although passengers generally are not allowed access to the baggage car, they were included in a great number of passenger trains as regular equipment. The baggage car

#340659