The Dassault Mercure is a twin-engined narrow-body jet-powered airliner developed and manufactured by French aircraft firm Dassault Aviation . According to Dassault, it was the first large-scale European cooperative civil aeronautics programme.
125-510: During 1967, the Mercure was proposed as a French competitor to the American Boeing 737 . It was Dassault's first venture into the commercial jet airliner market, the company having traditionally built fighters and executive jets. On 28 May 1971, the prototype conducted its maiden flight , while the type entered service on 4 June 1974 with French airline Air Inter . Attempts were made to market
250-430: A JT8D -117 powered airliner, quieter but larger, requiring an additional 80-million French Francs loan. The French government decided Dassault had to support half of the Mercure 200C development costs, which was impossible after the Mercure 100 failure. The project was then canceled. To answer an official request, Dassault proposed a variant with the new 22,000–25,000 lbf (98–111 kN) CFM International CFM56 and
375-528: A Mirage F1 competitor with the F-16 Fighting Falcon , with no outcome. In 1981, Marcel Dassault tried to license the program in the US, unsuccessfully. The Dassault Mercure was a jet-powered narrow-body jet airliner , optimised for short-haul routes. It intentionally exchanged fuel for passenger capacity in order to carry a greater passenger load. As such, the Mercure had up to 17 per cent more seats than
500-497: A supercritical wing . In 1975, contacts were made with Douglas Aircraft Company and Lockheed Corporation to build and sell it in the US, and with SNIAS to build it in France. However, Marcel Dassault was concerned that the CFM56 was not yet ordered. The Mercure 200-1 would be lengthened by 6 m (20 ft) to accommodate 160 passengers in two classes to 184, while the 200-2 would keep
625-634: A VIP aircraft by the Mexican Air Force for 23 years under registration TP-03. TP-03 would be broken up in 2006. The first 737-100, NASA 515, is on static display in the Museum of Flight in Seattle and is the last surviving example of the type. The 737-200 was a 737-100 with an extended fuselage, launched by an order from United Airlines in 1965 and entered service with the launch customer in April 1968. Its unit cost
750-466: A certificate of airworthiness (CoA). A CoA is issued for each aircraft that is properly registered if it conforms to its type design and ready for safe operation. The CoA is valid and the aircraft may be operated as long as it is maintained in accordance with the rules issued by the regulatory authority. The concept of a 'type certificate' was introduced by the "Air Navigation Regulations" published in May 1919 by
875-458: A design team, which cooperated with CFM International to select, modify and deploy a new engine and nacelle that would make the 737-300 into a viable aircraft. They chose the CFM56-3B-1 high-bypass turbofan engine to power the aircraft, which yielded significant gains in fuel economy and a reduction in noise, but also posed an engineering challenge, given the low ground clearance of the 737 and
1000-479: A few prototypes are built, each subject to different tests. The prototypes are first used for ground and system tests. One of the prototypes (known as the "static airframe") is subject to destructive testing, i.e., the prototype is subject to stress beyond normal and abnormal operations until destruction. The test-results are compared with initial submitted calculations to establish the ultimate structural strength. Other prototypes will undergo other systems tests until
1125-401: A given amount of time in order to avoid a situation where the applicant would have to change the design as a result of changed regulation. An initial design sample known as a prototype is built. This refers to either the aircraft, the engines or the propeller, depending on the basis of the certification. For the purpose of illustration, the discussion shall be limited to the aircraft. Normally
1250-518: A gravel deflector on the nose gear and a vortex dissipator extending from the front of the engine. Alaska Airlines used the gravel kit for some of its combi aircraft rural operations in Alaska until retiring its -200 fleet in 2007. Air Inuit , Nolinor Aviation and Chrono Aviation still use the gravel kit in Northern Canada. Canadian North also operated a gravel-kitted 737-200 Combi, but this
1375-423: A need for a new aircraft to supplement the 727 on short and thin routes. Preliminary design work began on May 11, 1964, based on research that indicated a market for a fifty to sixty passenger airliner flying routes of 50 to 1,000 miles (100 to 1,600 km). The initial concept featured podded engines on the aft fuselage, a T-tail as with the 727, and five-abreast seating. Engineer Joe Sutter relocated
SECTION 10
#17328522930041500-456: A new Boeing aircraft. Lufthansa was the only significant customer to purchase the 737-100 and only 30 aircraft were produced. The -200 was rolled out on June 29, 1967, and had its maiden flight on August 8, 1967. It was then certified by the FAA on December 21, 1967. The inaugural flight for United Airlines took place on April 28, 1968, from Chicago to Grand Rapids, Michigan . The lengthened -200
1625-516: A new variant may require re-certification. Again the basic process of type certifications is repeated (including maintenance programs). However, unaltered items from the basic design need not be retested. Normally, one or two of the original prototype fleet are remanufactured to the new proposed design. As long as the new design does not deviate too much from the original, static airframes do not need to be built. The resultant new prototypes are again subjected to flight tests. Upon successful completion of
1750-514: A new version, the Mercure 200C, in cooperation with Air France , to carry 140 passengers across 2,200 km (1,200 nmi). Several major carriers in the United States showed some interest. At the beginning of 1973, an agreement was formed with the French government to finance this programme as a 200-million French Francs loan, refundable on sales after the 201st aircraft. However Air France sought
1875-740: A particular type design. ADs are used by the certifying authority to notify aircraft owners and operators of unsafe conditions and to require their correction. ADs prescribe the conditions and limitations, including inspection, repair, or alteration under which the product may continue to be operated. With increasing in-service experience, the type certificate holder may find ways to improve the original design resulting in either lower maintenance costs or increased performance. These improvements (normally involving some alterations) are suggested through service bulletins to an aircraft owners/operators as optional (and may be extra cost) items. The owner/operator shall exercise their discretion whether or not to incorporate
2000-408: A program's profitability. A type certificate (TC) is issued to signify the airworthiness of the approved design or "type" of an aircraft to be manufactured. The TC is issued by a regulatory authority, and once issued, the design cannot be changed unless at least part of the process for certification is repeated to cover the changes. The TC reflects a determination made by a regulatory authority that
2125-502: A range similar to the Airbus A319LR . The 737-800 was a stretched version of the 737-700 launched on September 5, 1994. The -800 seats 162 passengers in a two-class or 189 passengers in a high-density, one-class layout. Launch customer Hapag-Lloyd Flug (now TUIfly ) received the first one in April 1998. The -800 replaced directly the -400 and aging 727-200 of US airlines. It filled also the gap left by Boeing's decision to discontinue
2250-416: A retrofit was provided for active aircraft. Longer nacelle/wing fairings were introduced, and the airflow over the flaps and slats was improved. The production line also introduced an improvement to the flap system, allowing increased use during takeoff and landing. All these changes gave the aircraft a boost to payload and range, and improved short-field performance. Both the first and last 737-100s became
2375-485: A single-class layout with slimline seats requiring an extra pair of exit doors . The MAX 200 would be 20% more cost-efficient per seat, including 5% lower operating costs than the MAX 8 and would be the most efficient narrow-body on the market when entering service. In mid-November 2018, the first MAX 200 of the 135 ordered by Ryanair rolled out, in a 197-seat configuration. It was first flown from Renton on January 13, 2019, and
2500-495: A strengthened wing spar . The -400s first flight was on February 19, 1988, and, after a seven-month/500-hour flight-testing run, entered service with Piedmont Airlines that October. The last two -400s, i.e. the last 737 Classics series, were delivered to CSA Czech Airlines on February 28, 2000. The 737-400 was replaced by the 737-800 of the Next Generation series. The 737-400SF was a 737-400 converted to freighter, though it
2625-517: A third AC system was driven by the APU. There are also three independent 28 volt DC sources. Intending for the Mercure to be mass-produced in substantial numbers (According to Flight International , the 300th aircraft was projected to be delivered by the end of 1979), Dassault established a total of four plants especially for the Mercure program: Martignas (close to Bordeaux ), Poitiers , Seclin (close to Lille ) and Istres . Additional manufacturing work
SECTION 20
#17328522930042750-428: A two class and 189 in a high-density, one class layout. The launch customer Alaska Airlines received the delivery on May 15, 2001. The 737-900ER (Extended Range) is the newest and largest variant of the 737NG generation. An additional pair of exit doors and a flat rear pressure bulkhead increased its seating capacity to 180 passengers in a two-class and up to 220 passengers in a one-class configuration. The -900ER
2875-944: Is an American narrow-body airliner produced by Boeing at its Renton factory in Washington . Developed to supplement the Boeing 727 on short and thin routes, the twinjet retained the 707 fuselage width and six abreast seating but with two underwing Pratt & Whitney JT8D low-bypass turbofan engines. Envisioned in 1964, the initial 737-100 made its first flight in April 1967 and entered service in February 1968 with Lufthansa . The lengthened 737-200 entered service in April 1968, and evolved through four generations, offering several variants for 85 to 215 passengers. The First Generation 737-100/200 variants were powered by Pratt & Whitney JT8D low-bypass turbofan engines and offered seating for 85 to 130 passengers. Launched in 1980 and introduced in 1984,
3000-446: Is issued by the aircraft operator and approved by the regulatory authority of the state of registry to maintain the airworthiness of the aircraft of the type owned by the operator. Maintenance tasks outlined in the maintenance program have to be scheduled and timely accomplished in order for the airworthiness certificate of their aircraft to remain valid. Other continuing airworthiness activities include additional tasks associated with
3125-919: Is the name given to the 737-300/400/500 series after the introduction of the -600/700/800/900 series of the Boeing 737 family. Produced from 1984 to 2000, a total of 1,988 Classic series were delivered. Close to the next major upgrade of single aisle aircraft at Airbus and Boeing, the price of jet fuel reached a peak in 2008, when airlines devoted 40% of the retail price of an air ticket to pay for fuel, versus 15% in 2000. Consequently, in that year carriers retired Boeing 737 Classic aircraft to reduce fuel consumption; replacements consisted of more efficient 737 Next Generation or A320 family aircraft. On June 4, 2008, United Airlines announced it would retire all 94 of its Classic 737 aircraft (64 737-300 and 30 737-500 aircraft), replacing them with A320 family jets taken from its Ted subsidiary, which has been shut down. This intensified
3250-401: Is to initiate a modification by the type design holder (manufacturer), and the other is to request a third party Supplemental type certificate (STC). The choice is determined by considering whether or not the change constitutes a new design (i.e. introduces risk not considered in the first type design). If so, then type design holder must develop and approve a modification to the type design. If
3375-516: The 737 MAX -7/8/9/10 variants, powered by improved CFM LEAP -1B high-bypass turbofans and accommodating 138 to 204 people, entered service in 2017. Boeing Business Jet versions have been produced since the 737NG, as well as military models. As of October 2024 , 16,705 Boeing 737s have been ordered and 11,898 delivered. Initially, its main competitor was the McDonnell Douglas DC-9 , followed by its MD-80 / MD-90 derivatives. In 2013,
3500-475: The Air Transport Association maintenance and engineering conference by chief project engineer Jack Steiner, where its elaborate high-lift devices raised concerns about maintenance costs and dispatch reliability. The original 737 continued to be developed into thirteen passenger, cargo, corporate and military variants. These were later divided into what has become known as the four generations of
3625-689: The Airbus A318 . The 737-700, the first variant of the Next-Generation, was launched in November 1993 with an order of 63 aircraft. The -700 seats 126 passengers in a two-class or 149 passengers in a one-class layout. The launch customer Southwest Airlines took the first delivery in December 1997. The 737-700 replaced the 737-300 and competes with the Airbus A319 . The 737-700C is a convertible version where
3750-464: The BAC One-Eleven (BAC-111), Douglas DC-9 , and Fokker F28 were already into flight certification. To expedite development, Boeing used 60% of the structure and systems of the existing 727, particularly the fuselage, which differs in length only. This 148-inch (3.76 m) wide fuselage cross-section permitted six-abreast seating compared to the rivals' five-abreast. The 727's fuselage was derived from
3875-536: The CFM LEAP -1B engine, with American Airlines intending to order 100 of these aircraft. On August 30, 2011, Boeing confirmed the launch of the 737 new engine variant, to be called the Boeing 737 MAX . It was based on earlier 737 designs with more efficient LEAP-1B power plants, aerodynamic improvements (most notably split-tip winglets ), and airframe modifications. It competes with the Airbus A320neo family that
Dassault Mercure - Misplaced Pages Continue
4000-553: The CFM56 . The 737 went on to become the highest-selling commercial aircraft in terms of orders until surpassed by the competing Airbus A320 family in October 2019, but maintains the record in total deliveries. The fuselage is manufactured in Wichita, Kansas , by Boeing spin-off company Spirit AeroSystems , before being moved by rail to Renton. The Renton factory has three assembly lines for
4125-656: The U.S. Air Force . Some were modified into CT-43s, which are used to transport passengers, and one was modified as the NT-43A Radar Test Bed. The first was delivered on July 31, 1973, and the last on July 19, 1974. The Indonesian Air Force ordered three modified 737-200s, designated Boeing 737-2X9 Surveiller . They were used as Maritime reconnaissance (MPA)/transport aircraft, fitted with SLAMMAR (Side-looking Multi-mission Airborne Radar). The aircraft were delivered between May 1982 and October 1983. After 40 years, in March 2008,
4250-488: The break-even point was anticipated to be around 125–150 aircraft. However, due to the lack of other orders, the production line was shut down on 15 December 1975. Only a total of two prototypes and ten production aircraft were built. Air Inter eventually refurbished and bought one of the prototypes (number 02) to add it to its fleet. On 29 April 1995, the last two Mercures in service flew their last commercial flights. Throughout their combined cumulative operational lifetimes,
4375-419: The maiden flight of the first prototype, powered by a pair of Pratt & Whitney JT8D -11 turbofan engines, capable of generating up to 6,800 kgf (15,000 lbf) of thrust, took place at Mérignac . On 7 September 1972, the second prototype, which was powered by a pair of Pratt & Whitney JT8D-15 engines, which would be used on all subsequent Mercures built, flew for the first time. On 19 July 1973,
4500-410: The -500. The Boeing 737 Next Generation , abbreviated as 737 Next Gen or 737NG , is the name given to the main models 737-600/700/800/900 series and the extended range -700ER/900ER variants of the Boeing 737 family. It has been produced since 1996 and introduced in 1997, with a total order of 7,097 aircraft, of which 7,031 have been delivered as of May 2019 . The primary goal was to re-engine
4625-463: The 707. The proposed wing airfoil sections were based on those of the 707 and 727, but somewhat thicker; altering these sections near the nacelles achieved a substantial drag reduction at high Mach numbers. The engine chosen was the Pratt & Whitney JT8D -1 low-bypass ratio turbofan engine, delivering 14,500 pounds-force (64 kN ) of thrust. The concept design was presented in October 1964 at
4750-594: The 737 MAX; a fourth is planned to open at the Everett factory in 2024. The Boeing 737 Original is the name given to the -100/200 and -200 Advanced series of the Boeing 737 family. The initial model was the 737-100, the smallest variant of the 737 aircraft family, which was launched in February 1965 and entered service with Lufthansa in February 1968. In 1968, its unit cost was US$ 3.7M (1968), $ 32.4M today. A total of 30 737-100s were ordered: 22 by Lufthansa, 5 by Malaysia–Singapore Airlines (MSA) and 2 by Avianca with
4875-421: The 737 project would not be canceled. Consultation with Lufthansa over the previous winter had resulted in the seating capacity being increased to 100. On April 5, 1965, Boeing announced an order by United Airlines for 40 737s. United wanted a slightly larger capacity than the 737-100, so the fuselage was stretched 36 inches (91 cm) ahead of, and 40 inches (102 cm) behind the wing. The longer version
5000-524: The 737 with the high pressure ratio CFM56-7. By the early 1990s, as the MD-80 slowly withdrew from the competition following the introduction of the MD-90, it had become clear that the new A320 family was a serious threat to Boeing's market share. Airbus won previously loyal 737 customers, such as Lufthansa and United Airlines. In November 1993, to stay in the single aisle competition, Boeing's board of directors authorized
5125-432: The 737-100 for commercial flight on December 15, 1967. It was the first aircraft to have, as part of its initial certification, approval for Category II approaches , which refers to a precision instrument approach and landing with a decision height between 98 and 197 feet (30 and 60 m). Lufthansa received its first aircraft on December 28, 1967, and on February 10, 1968, became the first non-American airline to launch
Dassault Mercure - Misplaced Pages Continue
5250-525: The 737-900 and competes with the Airbus A321neo . The 737 MAX 10 was proposed as a stretched MAX 9 in mid-2016, enabling seating for 230 in a single class or 189 in two-class layout, compared to 193 in two-class seating for the A321neo. The modest 66-inch (1.7 m) stretch of fuselage enables the MAX 10 to retain the existing wing and CFM Leap 1B engine from the MAX 9 with a trailing-link main landing gear as
5375-715: The A340-600 which is based on the Airbus A340-200 and the A340-300. Any additions, omissions or alterations to the aircraft's certified layout, built-in equipment, airframe and engines, initiated by any party other than the type certificate holder, need an approved supplementary ("supplemental" in FAA terminology) type certificate, or STC. The scope of an STC can be extremely narrow or broad. It could include minor modifications to passenger cabin items or installed instruments. More substantial modifications may involve engine replacement, as in
5500-659: The Blackhawk modifications to Cessna Conquest and Beechcraft King Air turboprops , or a complete role change for the aircraft, such as converting a B-17 or Stearman into an agricultural aircraft. STCs are applied due to either the type certificate holder's refusal (frequently due to economics) or its inability to meet some owners' requirements. STCs are frequently raised for out-of-production aircraft types conversions to fit new roles. Before STCs are issued, procedures similar to type certificate changes for new variants are followed, likely including thorough flight tests. STCs belong to
5625-408: The Boeing 737 family: The launch decision for the $ 150 million (~$ 1.11 billion in 2023) development was made by the board on February 1, 1965. The sales pitch was big-jet comfort on short-haul routes. Lufthansa became the launch customer on February 19, 1965, with an order for 21 aircraft, worth $ 67 million (~$ 494 million in 2023) after the airline had been assured by Boeing that
5750-480: The CFM56 included the U.S. Air Force with its program to re-engine KC-135 tankers. The passenger capacity of the aircraft was increased to 149 by extending the fuselage around the wing by 9 feet 5 inches (2.87 m). The wing incorporated several changes for improved aerodynamics. The wingtip was extended 9 inches (23 cm), and the wingspan by 1 foot 9 inches (53 cm). The leading-edge slats and trailing-edge flaps were adjusted. The tailfin
5875-456: The FAA cleared the MAX to return to service. Before the aircraft can fly again, repairs must be implemented and airlines' training programs must be approved. Passenger flights in the U.S. are expected to resume before the end of the year. Worldwide, the first airline to resume passenger service was Brazilian low-cost Gol , on December 9, 2020. The 737 MAX 7, a shortened variant of the MAX ;8,
6000-525: The MD-80 and MD-90 aircraft, following Boeing's merger with McDonnell Douglas . The 737-800 is the most widely used narrowbody aircraft and competes primarily with the Airbus A320. The 737-900 was launched in 1997 and took its first flight on August 3, 2000. It retains the MTOW , fuel capacity, trading range for payload and also the exit configuration of the -800, limiting its seat capacity to approximately 177 in
6125-433: The Mercure 100 fuselage length with the new wing to seat 124 in two classes to 150. The 35 m (115 ft) wide wing of the 200 version would have an area of 135 m (1,450 sq ft), for a 39.6–35.7 t (87,000–79,000 lb) empty weight and a 66–76 t (146,000–168,000 lb) MTOW . Meanwhile, Douglas introduced a competing, stretched DC-9 . Dassault then initiated contacts with General Dynamics ,
6250-434: The Mercure accumulated a total of 360,000 flight hours, during which 44 million passengers were carried across 440,000 individual flights without any accidents occurring, and a 98% in-service reliability. Data from Jane's all the world's aircraft, 1975–76 , Dassault Mercure General characteristics Performance Aircraft of comparable role, configuration, and era Boeing 737 The Boeing 737
6375-493: The Mercure name.." said Marcel Dassault. Extremely modern computer tools for the time were used to develop the wing of the Mercure 100. Even though it was larger than the Boeing 737, the Mercure 100 was the faster of the two. In June 1969, a full scale mockup was presented during the Paris Airshow at Le Bourget Airport . On 4 April 1971, the prototype Mercure 01 rolled out of Dassault's Bordeaux-Merignac plant. On 28 May 1971,
SECTION 50
#17328522930046500-434: The Mercure's wing, such as the general layout and individual wing sections, were optimised using a combination of wind tunnel tests and computer-generated simulations by Dassault's design team. The wing had a good lift/drag ratio and a high block efficiency. The flaps formed a continuous spanwise unit when deployed in the take-off position, requiring neither low-speed ailerons nor cut-outs to accommodate jet exhaust, due to
6625-407: The Next Generation program to mainly upgrade the 737 Classic series. In late 1993, after engineering trade studies and discussions with major customers, Boeing proceeded to launch a second derivative of the Boeing 737, the 737 Next Generation (NG) -600/700/800/900 series. It featured a redesigned wing with a wider wingspan and larger area, greater fuel capacity, longer range and higher MTOWs . It
6750-403: The Next Generation series. The 737-500 was offered as a modern and direct replacement of the 737-200. It was launched in 1987 by Southwest Airlines , with an order for 20 aircraft, and it flew for the first time on June 30, 1989. A single prototype flew 375 hours for the certification process, and on February 28, 1990, Southwest Airlines received the first delivery. The -500 incorporated
6875-496: The STC holder and are generally more restrictive than type certificate changes. The TC holder remains responsible for the continued integrity of the approved aircraft type design and must continue to be the focal point for resolving issues that may require corrective action. This requires the continued capability, or access to a capability, of providing appropriate technical solutions for service difficulties or mandatory corrective action. If
7000-533: The Second Generation 737 Classic -300/400/500 variants were upgraded with more fuel-efficient CFM56-3 high-bypass turbofans and offered 110 to 168 seats. Introduced in 1997, the Third Generation 737 Next Generation (NG) -600/700/800/900 variants have updated CFM56-7 high-bypass turbofans, a larger wing and an upgraded glass cockpit , and seat 108 to 215 passengers. The latest, and Fourth Generation,
7125-593: The UK's Secretary of State for Air , Winston Churchill . The Buhl-Verville CA-3 Airster was the first aircraft to receive a type certificate in the US, (i.e. A.T.C. No. 1) issued by the Aeronautics Branch of the Department of Commerce on March 29, 1927. Initially, the applicant design organisation submits documents to their local aviation regulating body, detailing how the proposed aircraft type design would fulfill
7250-473: The aft fuselage instead of as a T-tail. Many designs for the engine attachment strut were tested in the wind tunnel and the optimal shape for high speed was found to be one which was relatively thick, filling the narrow channels formed between the wing and the top of the nacelle, particularly on the outboard side. At the time, Boeing was far behind its competitors; the SE 210 Caravelle had been in service since 1955, and
7375-470: The aircraft affected. It also identifies the certification basis for regulatory compliance for the design change. The TC implies that aircraft manufactured according to the approved design can be issued an airworthiness certificate . To meet those requirements the aircraft and each sub-assembly must also be approved. For example, in the U.S. these sub-assemblies must meet requirements in the applicable Technical Standards Order (TSO). To meet those requirements
7500-429: The aircraft of a new type intended for serial production is in compliance with applicable airworthiness requirements established by the national air law . For up to three seats, primary category aircraft certification costs around US$ 1 million, US$ 25 million for a general aviation aircraft and hundreds of millions of dollars for a commercial aircraft ; certification delays can cost millions of dollars and can decide
7625-539: The aircraft to modern specifications, while also retaining commonality with previous 737 variants. In 1980, preliminary aircraft specifications of the variant, dubbed 737-300, were released at the Farnborough Airshow . This first major upgrade series was later renamed 737 Classic. It competed primarily with the MD-80, its later derivative the MD-90 , and the newcomer Airbus A320 family . Boeing engineer Mark Gregoire led
SECTION 60
#17328522930047750-491: The aircraft's design envelope . In parallel with aircraft testing, the applicant firm also draws up maintenance program to support continuous airworthiness after approval of the design. The program is drawn with inputs from tests results and also from initial customers' engineering departments. The proposed maintenance program is submitted to the regulators for comment and approval. After successful completion of ground and flight tests, along with an approved maintenance program,
7875-413: The aircraft's range was only 1,700 kilometres (1,100 mi). Consequently, the Mercure 100 achieved no foreign sales. With a total of only ten sales with one of the prototypes refurbished and sold as the 11th Mercure to Air Inter, the airliner represented one of the worst failures of a commercial airliner in terms of aircraft sold. After the commercial failure of the Mercure 100, Marcel Dassault requested
8000-418: The airworthiness requirements. After investigations by the regulator, the final approval of such documents (after the required comments and amendments in order to fulfill the laws), becomes the basis of the certification. The firm follows it and draws a proposed timetable of actions required for certification tests. With the application, the regulations to be applied will usually be frozen for this application for
8125-509: The bulletins and report the decision to the regulatory authority of the state of the aircraft registry. Sometimes SBs can become mandated by relevant ADs. Often the basic design is enhanced further by the type certificate holder. Major changes beyond the authority of the service bulletins require amendments to the type certificate. For example, increasing (or decreasing) an aircraft's flight performance, range and load carrying capacity by altering its systems, fuselage, wings or engines resulting in
8250-467: The certification program, the original type certificate is amended to include the new variant (normally denoted by a new model number additional to the original type designation). Typical examples are; the Boeing 737NG (737-600, 737-700, 737-800 and 737-900) which replaced the 737 Original family (737-100 and 737-200) and the 737 Classic family (737-300, 737-400 and 737-500) and the Airbus A340-500 and
8375-470: The commercial value of the Mercure, highlighting its low operating costs across short sectors, which principally resulted from its refined aerodynamic features and low structural weight. The design also benefitted from an advanced fail-safe structure, the majority of which having been milled in accordance to Dassault's traditional military manufacturing practices. The Mercure featured in-house-developed triplicated, fail-safe hydraulic flight control system and
8500-436: The competing Boeing 737 while having a shorter range. It was designed to be outfitted with a two-crew flight deck, although operator Air Inter had its aircraft flown by three-man crews. According to Flight International, the basic model of the Mercure featured a degree of built-in stretch potential. Elements of the design were reportedly capable of supporting the envisioned expanded model with little or no change, including much of
8625-462: The competition between the two giant aircraft manufacturers, which has since become a duopoly competition . An optional upgrade with winglets became available for the Classic and NG series. Development began in 1979 for the 737's first major revision, which was originally introduced as the 'new generation' of the 737. Boeing wanted to increase capacity and range, incorporating improvements to upgrade
8750-450: The denser, 200-seat MAX 200), and MAX 9 replace the 737-700, -800, and -900 respectively. The further stretched 737 MAX 10 has also been added to the series. The aim was to re-engine the 737NG family using CFM LEAP-1B engines having very high bypass ratio, to compete with the Airbus A320neo family. On July 20, 2011, Boeing announced plans for a third major upgrade and respectively fourth generation of 737 series to be powered by
8875-459: The design documents are examined for compliance with the applicable Minimum Operating Performance Standards (MOPS) applicable to that sub-assembly. MOPS are published by expert industry groups such as: RTCA Inc., EUROCAE, and SAE. When aircraft are produced to meet a given TC, each one need not be tested as rigorously but the confidence demonstrated by the TC is conferred, when the aircraft has been assigned
9000-404: The design of the new airliner had been shaped by Dassault's "philosophy of aiming the aircraft at a corner of the market which it believes existing types do not adequately serve". Marcel Dassault decided to name the aircraft Mercure (French for Mercury ). "Wanting to give the name of a god of mythology, I found of them only one which had wings with its helmet and ailerons with its feet, from where
9125-469: The development programme was officially launched. This aircraft was viewed as being a major opportunity for Dassault to demonstrate upon the civilian market its knowledge of high-speed aerodynamics and low-speed lift capability that had previously been developed in the production of a long line of jet fighters, such as the Ouragan , Mystère and Mirage aircraft. The French Government contributed 56 per cent of
9250-519: The engines being fixed low down upon deep pylons. Production Mercures were powered by a pair of Pratt & Whitney JT8D -15 turbofan engines, capable of generating a maximum of 15,500 lb (69 kN) thrust. These were mounted on underwing pylons, which were designed with anti- vibration mountings. The engines themselves featured joint Snecma /Dassault-developed thrust reverser and noise suppression systems. Significant attention had been paid to reducing engine noise, this issue having been one of
9375-437: The engines to the wings which lightened the structure and simplified the accommodation of six-abreast seating in the fuselage. The engine nacelles were mounted directly to the underside of the wings, without pylons, allowing the landing gear to be shortened, thus lowering the fuselage to improve baggage and passenger access. Relocating the engines from the aft fuselage also allowed the horizontal stabilizer to be attached to
9500-606: The final 737-200 aircraft in the U.S. flying scheduled passenger service were phased out, with the last flights of Aloha Airlines . As of 2018, the variant still saw regular service through North American charter operators such as Sierra Pacific Airlines . The short-field capabilities of the 737-200 led Boeing to offer the "Unpaved Strip Kit" (see the Air North example, right). This option reduced foreign object damage when operated on remote, unimproved or unpaved runways, that competing jetliners could not use safely. The kit included
9625-411: The final commercial aircraft delivered to MSA on October 31, 1969. This variant was largely overshadowed by its bigger 737-200 sibling, which entered service two months later. The original engine nacelles incorporated thrust reversers taken from the 727 outboard nacelles. They proved to be relatively ineffective and tended to lift the aircraft up off the runway when deployed. This reduced the downforce on
9750-506: The final topics of research during the Mercure's development. According to Flight International, there was a perception that the Federal Aviation Administration of the United States, a major potential market for the Mercure, may enact regulations that would necessitate the implementation of a noise-attenuation retrofit programme, and thus Dassault needed to be prepared to address this foreseen scenario. Dassault emphasised
9875-430: The first production aircraft conducted its maiden flight. On 12 February 1974, the Mercure received its Type certificate and, on 30 September 1974, was certified for Category IIIA approach all-weather automatic landing (minimum visibility = 500 ft, minimum ceiling = 50 ft). The Mercure 100 was also the first commercial airliner to be operated by a 100% female crew on one of its flights. Dassault tried to attract
10000-531: The first variant of the 737 MAX, has a longer fuselage than the MAX 7. On July 23, 2013, Boeing completed the firm configuration for the 737 MAX 8. Its first commercial flight was operated by Malindo Air on May 22, 2017. The MAX 8 replaced the 737-800 and competed with the A320neo. The 737 MAX 200 , a high-density version of the 737 MAX 8, was launched in September 2014 and named for seating for up to 200 passengers in
10125-471: The flight controls lacked any manual reversion. Air conditioning also featured independent duplicated systems with a cross-feed tapped from the engines compressors along with, unusually, the auxiliary power unit for use during takeoffs and on the ground, as well as in the instance of a double-engine failure scenario. The electrics were composed of a pair of independent 120/128 volt three-phase 400 Hz AC systems fed via engine-driven alternators , while
10250-476: The frames outlined in a TC data sheet, and each given a serial number (a "series aircraft"). As the aircraft enters into service, it is subject to operational wear and tear which may cause performance degradations. The set of processes by which an aircraft, engine, propeller or part complies with the applicable airworthiness requirements and remains in a condition for safe operation throughout its operating life called continuing airworthiness . A maintenance program
10375-554: The global 737 fleet had completed more than 184 million flights over 264 million block hours since its entry into service. It was the highest-selling commercial aircraft until being surpassed by the competing Airbus A320 family in October 2019, but maintains the record in total deliveries. The 737 MAX, designed to compete with the A320neo , was grounded worldwide between March 2019 and November 2020 following two fatal crashes. Boeing had been studying short-haul jet aircraft designs, and saw
10500-452: The holder is no longer capable or if the TC is transferred to another holder a regulatory authority should take appropriate action in accordance with the national legislation. In the case of the TC being transferred to another holder the new holder shall be capable of fulfilling the TC holder responsibilities in following ADs and providing technical support to keep the type design current with the applicable airworthiness requirements, even after
10625-482: The improvements of the 737 Classic series, allowing longer routes with fewer passengers to be more economical than with the 737-300. The fuselage length of the 737-500 is 1 foot 7 inches (48 cm) longer than the 737-200, accommodating up to 140 passengers. Both glass and older-style mechanical cockpits arrangements were available. Using the CFM56-3 engine also gave a 25 percent increase in fuel efficiency over
10750-566: The interest of major airlines and several regional airlines, touting the Mercure 100 as a replacement for the Douglas DC-9 . A few airlines showed some initial interest but only Air Inter , a domestic French airline, placed an order. This lack of interest was due to several factors, including the devaluation of the dollar and the oil crisis of the 1970s, but mainly because of the Mercure's operating range – suitable for domestic European operations but unable to sustain longer routes; at maximum payload,
10875-438: The larger diameter of the engine over the original Pratt & Whitney engines. Gregoire's team and CFM solved the problem by reducing the size of the fan (which made the engine slightly less efficient than it had been forecast to be), placing the engine ahead of the wing, and by moving engine accessories to the sides of the engine pod, giving the engine a distinctive non-circular "hamster pouch " air intake. Earlier customers for
11000-428: The last 737-100s in service. The first aircraft used by Boeing as prototype under registration N73700 was later ordered by and delivered to NASA on July 26, 1973, which then operated it under registration N515NA and retired after 30 years on September 27, 2003. The last 737-100 built and also the last operating was originally sold to Malaysia–Singapore Airlines : it was transferred to Air Florida before being used as
11125-452: The longer length. Entry into service with launch operator Southwest Airlines was expected in January 2019, but the airline deferred these orders until 2023–2024. The 737 MAX 7 replaced the 737-700 and was predicted to carry 12 more passengers and fly 400 nautical miles (740 km; 460 mi) farther than the competing Airbus A319neo with 7% lower operating costs per seat. The 737 MAX 8,
11250-477: The main wheels thereby reducing the effectiveness of the wheel brakes. In 1968, an improvement to the thrust reversal system was introduced. A 48-inch tailpipe extension was added and new target-style thrust reversers were incorporated. The thrust reverser doors were set 35 degrees away from the vertical to allow the exhaust to be deflected inboard and over the wings and outboard and under the wings. The improvement became standard on all aircraft after March 1969, and
11375-504: The maintenance program and design changes to be accomplished via: Sometimes during service, the aircraft may encounter problems that may compromise the aircraft's safety, which are not anticipated or detected in prototype testing stages. The aircraft design is thus compromised. The regulators will now issue an airworthiness directive to the type certificate holder and to all owners globally. The directives normally consists of additional maintenance or design actions that are necessary to restore
11500-532: The mid-1960s, Marcel Dassault , the founder and owner of French aircraft company Dassault Aviation , as well as other parties such as the French Directorate General for Civil Aviation (DGAC), examined the civil aviation market and noticed that there was no existing aircraft that was intended specifically to serve low-distance air routes. Thus, it was found that there could be a prospective market for such an airliner, if it were to be developed. The DGAC
11625-413: The older 737-200s P&W engines. The 737-500 has faced accelerated retirement due to its smaller size, after 21 years in service compared to 24 years for the -300. While a few 737-300s were slated for freighter conversion, no demand at all existed for a -500 freighter conversion. The 737-500 was replaced by the 737-600 of the Next Generation series, though the -600 was not as successful in total orders as
11750-500: The only major change. The MAX 10 was launched on June 19, 2017, with 240 orders and commitments from more than ten customers. The variant configuration with a predicted 5% lower trip cost and seat cost compared to the A321neo was firmed up by February 2018, and by mid-2018, the critical design review was completed. The MAX 10 has a similar capacity to the A321XLR, but shorter range and much poorer field performance in smaller airports. It
11875-582: The original -200s and respectively -100s. The 737-200 Advanced became the production standard in June 1971. Boeing also provided the 737-200C ( Combi ), which allowed for conversion between passenger and cargo use and the 737-200QC (Quick Change), which facilitated a rapid conversion between roles. The 1,114th and last delivery of a -200 series aircraft was in August 1988 to Xiamen Airlines . Nineteen 737-200s, designated T-43 , were used to train aircraft navigators for
12000-453: The primary competitor for the 737NG series remained only the A320 family. The 737-600, the smallest model of the Next-Generation, was launched by Scandinavian Airlines (SAS) in March 1995 with the first aircraft delivered in September 1998. A total of 69 aircraft without winglets have been produced with the last one delivered to WestJet in 2006. The 737-600 replaced the 737-500 and is similar to
12125-423: The production of the aircraft type has stopped but many out-of-production aircraft continue useful lives. STCs are also bound by the same rules. When the holder decides to stop supporting the aircraft type without the transfer of TC holder responsibilities, the TC is returned to the issuing regulatory authority and the remaining aircraft fleet can be grounded by the current states of registry until further decisions on
12250-435: The programme's total development costs, which was intended to be repaid by Dassault via a levy on sales of the airliner. The company also financed the initiative with $ 10 million of its own money, as well as being mainly responsible for costs related to manufacture. The program cost was $ 75 million and the unit cost $ 6 million in 1971, raised to US$ 6.5 million in 1972. According to aerospace publication Flight International ,
12375-399: The prototype is approved, and the firm is granted the TC for the prototype (as understood that it should include all furnished equipment for its intended role). The legal term for the firm is now the "type certificate holder". Subsequently, the prototype now serves as a template for serial aircraft production and the aircraft rolling out of the factory should be identical to the prototype within
12500-433: The regulatory authority agrees the change does not introduce new risk, the STC option is available. An STC is less expensive because the design change can be developed by a specialized design organization, a generally more flexible and efficient process than going through the original manufacturer. The STC defines the product design change, states how the modification affects the existing type design, and lists serial numbers of
12625-529: The satisfaction of the regulators. With all ground tests completed, prototypes are made ready for flight tests. The flight tests are flown by specially approved flight test pilots who will fly the prototypes to establish the ultimate flight limits which should be within the airworthiness rules. If a long range airliner is tested, the flight tests may cover the whole world. Tests may also cover different environments - high and low altitude, freezing and hot climates, and so on, to confirm correct performance throughout
12750-450: The seats can be removed to carry cargo instead. There is a large door on the left side of the aircraft. The United States Navy was the launch customer for the 737-700C under the military designation C-40 Clipper . The 737-700ER (Extended Range ) was launched on January 31, 2006, and featured the fuselage of the 737-700 and the wings and landing gear of the 737-800. A 737-700ER can typically accommodate 126 passengers in two classes with
12875-442: The series has received 5,011 firm orders. In March 2019, civil aviation authorities around the world grounded the 737 MAX following two hull loss crashes which caused 346 deaths. On December 16, 2019, Boeing announced that it would suspend production of the 737 MAX from January 2020, which was resumed in May 2020. In the midyear 2020, the FAA and Boeing conducted a series of recertification test flights. On November 18, 2020,
13000-520: The three European short-haul single aisles slowly withdrew from the competition. Sales were low in the early 1970s and, after a peak of 114 deliveries in 1969, only 22 737s were shipped in 1972 with 19 in backlog. The US Air Force saved the program by ordering T-43s , which were modified Boeing 737-200s. African airline orders kept the production running until the 1978 US Airline Deregulation Act , which improved demand for six-abreast narrow-body aircraft. Demand further increased after being re-engined with
13125-670: The type design is in compliance with airworthiness requirements. Examples of regulatory authorities are the United Kingdom's Civil Aviation Authority (CAA), the U.S. Federal Aviation Administration (FAA), the European Aviation Safety Agency (EASA), Transport Canada , Brazil’s Agência Nacional de Aviação Civil and the Civil Aviation Administration of China (CAAC). When changes are needed to an airframe or on-board equipment, there are two options. One
13250-555: The type in the US, including partnerships with American manufacturers Douglas , Lockheed and General Dynamics , with the vision of producing it in the United States . However, the Mercure had very little success on the market, which has been attributed to several factors, including a lack of range in comparison to rival aircraft. As a consequence, there were only 12 aircraft constructed, all of which were built between 1971 and 1975. The Mercure performed its final flight in 1995. During
13375-399: The type's airworthiness. Compliance is mandatory and thus if an operator does not comply with an AD, then the datum aircraft is not considered airworthy and further operation of the affected aircraft type would be unlawful , making the operator liable to legal action by the relevant national aviation authority, and rendering null-and-void any of the operator's insurance policies relating to
13500-474: The type, such as hull loss and accident third party coverage. ADs may also be raised with changes of the local or global aviation rules and requirements, e.g., the requirement to fit armored cockpit doors for all passenger airliners after the September 11 attacks . The certifying authority issues an AD when an unsafe condition is found to exist in a product (aircraft, aircraft engine, propeller, or appliance) of
13625-406: The wing, cabin, and the undercarriage . The landing gear was spaced to accommodate the fitting of longer legs to, in turn, enable larger engines and an elongated fuselage to be later adopted. The wing of the Mercure was largely conventional. It was relatively thick, possessing a section of 12.5 per cent thickness at the wing root, slimming to 8.5 per cent thickness at the tip of the wing. Aspects of
13750-400: Was US$ 4.0M (1968) ($ 35M today). The -200's unit cost was US$ 5.2M (1972) ($ 37.9M today). The 737-200 Advanced is an improved version of the -200, introduced into service by All Nippon Airways on May 20, 1971. After aircraft #135, the 737-200 Advanced has improved aerodynamics, automatic wheel brakes, more powerful engines, more fuel capacity, and hence a 15% increase in payload and range over
13875-450: Was designated the -300SP ( Special Performance ). The 737-300 was replaced by the 737-700 of the Next Generation series. The 737-400 was launched in 1985 to fill the gap between the 737-300 and the 757-200. In June 1986, Boeing announced the development of the 737-400, which stretched the fuselage a further 10 feet (3.0 m), increasing the capacity to 188 passengers, and requiring a tail bumper to prevent tailstrikes during take-off and
14000-405: Was designated the 737-200, with the original short-body aircraft becoming the 737-100. Detailed design work continued on both variants simultaneously. The first -100 was rolled out on January 17, 1967, and took its maiden flight on April 9, 1967, piloted by Brien Wygle and Lew Wallick. After several test flights the Federal Aviation Administration (FAA) issued Type Certificate A16WE certifying
14125-615: Was distributed across locations throughout Europe, the production programme being a collaborative effort between Dassault, Fiat Aviazione of Italy, SABCA (Société Anonyme Belge de Constructions Aéronautiques) of Belgium, Construcciones Aeronáuticas SA (CASA) of Spain and the Swiss National Aircraft Factory at Emmen , all of which acted as risk-sharing partners in the venture. On 30 January 1972, Air Inter placed an order for ten Mercures, which had to be delivered between 30 October 1973 and 13 December 1975. At this point,
14250-502: Was due to be retired in early 2023. As of September 2023 , a relatively high number of 737-200s remain in service compared to other early jet airliners, with fifty examples actively flying for thirty carriers. During the 737 MAX groundings , older 737s, including the 200 and Classic series , were in demand for leasing. C-GNLK, one of Nolinor's 737-200s, is the oldest jet airliner in commercial service as of 2024, having entered service 50 years prior in 1974. The Boeing 737 Classic
14375-414: Was due to enter service in April 2019. The 737 MAX 9, the stretched variant of the MAX 8, was launched with an order of 201 aircraft in February 2012. It made its roll-out on March 7, 2017, and first flight on April 13, 2017; It was certified by February 2018. The launch customer, Lion Air Group, took the first MAX 9 on March 21, 2018, before entering service with Thai Lion Air . The 737 MAX 9 replaced
14500-405: Was equipped with CFM56-7 high pressure ratio engines, a glass cockpit , and upgraded interior configurations. The four main models of the series can accommodate seating for 108 to 215 passengers. It was further developed into additional versions such as the corporate Boeing Business Jet (BBJ) and military P-8 Poseidon aircraft. Following the merger between Boeing with McDonnell Douglas in 1997,
14625-553: Was introduced to meet the range and passenger capacity of the discontinued 757-200 and to directly compete with the Airbus A321 . The Boeing 737 MAX is the name given to the main models 737 MAX 7/8/9/10 series and the higher-density MAX 200 variant of the Boeing 737 family. It is offered in four main variants, typically offering 138 to 230 seats and a range of 3,215 to 3,825 nautical miles [nmi] (5,954 to 7,084 km; 3,700 to 4,402 mi). The 737 MAX 7, MAX 8 (including
14750-408: Was keen to promote a French equivalent to the popular American Boeing 737 , and suggested the development of a 140-seat airliner to Dassault. In 1967, with the issuing of backing by the French government, Dassault decided to commence work on its short-haul airliner concept. During 1968, the initial studies performed by the company's research team were orientated around a 110 to 120-seat airliner which
14875-437: Was launched in December 2010 and reached 1,029 orders by June 2011, breaking Boeing's monopoly with American Airlines , which had an order for 130 A320neos that July. The 737 MAX had its first flight on January 29, 2016, and gained FAA certification on March 8, 2017. The first delivery was a MAX 8 on May 6, 2017, to Lion Air 's subsidiary Malindo Air , which put it into service on May 22, 2017. As of January 2019 ,
15000-402: Was not a model delivered by Boeing and hence the nickname Special Freighter (SF) . Alaska Airlines was the first to convert one of their 400s from regular service to an aircraft with the ability to handle 10 pallets. The airline had also converted five more into fixed combi aircraft for half passenger and freight. These 737-400 Combi aircraft were retired in 2017 and replaced by the 737-700F of
15125-497: Was originally based on the 737-700, flying 1,000 nautical miles (1,900 km; 1,200 mi) farther and accommodating two more seat rows at 18% lower fuel costs per seat. The redesign uses the 737-8 wing and landing gear; a pair of over-wing exits rather than the single-door configuration; a 46-inch-longer (1,200 mm) aft fuselage and a 30-inch-longer (760 mm) longer forward fuselage; structural re-gauging and strengthening; and systems and interior modifications to accommodate
15250-419: Was powered by a pair of rear-mounted Rolls-Royce Spey turbofan engines; as time went on, a specification for a 150-seat aircraft with a 1000-km range (540 nm) was developed. As envisioned, the new airliner would attack this market segment at the upper end with a 140-seat jetliner, contrasting against the 100-seat Boeing 737-100 and the 115-seat Boeing 737-200 variants then in production. In April 1969,
15375-450: Was redesigned, the flight deck was improved with the optional EFIS (Electronic Flight Instrumentation System), and the passenger cabin incorporated improvements similar to those developed on the Boeing 757 . The prototype -300, the 1,001st 737 built, first flew on February 24, 1984, with pilot Jim McRoberts. It and two production aircraft flew a nine-month-long certification program. The 737-300 retrofitted with Aviation Partners ' winglets
15500-436: Was unveiled in Boeing's Renton factory on November 22, 2019, and scheduled for first flight in 2020. Boeing also considered parallel development with the 757 replacement, similar to the development of the 757 and 767 in the 1970s. Type certificate A type certificate signifies the airworthiness of a particular category of aircraft, according to its manufacturing design ( type design ). Certification confirms that
15625-492: Was widely preferred over the -100 by airlines. The improved version, the 737-200 Advanced, was introduced into service by All Nippon Airways on May 20, 1971. The 737 original model with its variants, known later as the Boeing 737 Original , initially competed with SE 210 Caravelle and BAC-111 due to their earlier entry into service and later primarily with the McDonnell Douglas DC-9, then its MD-80 derivatives as
#3996