Misplaced Pages

#102897

50-532: DWC may refer to: Al Maktoum International Airport , United Arab Emirates (IATA code) Daniel Webster College , a former college in Nashua, New Hampshire, US Darwin Core , biodiversity data standards Deep water culture , of hydroponics Diamond wire cutting Douglas World Cruiser , a 1923 aircraft Subarctic climate (Köppen classification) Topics referred to by

100-411: A windsock beside a landing strip. Types of runway safety incidents include: The choice of material used to construct the runway depends on the use and the local ground conditions. For a major airport, where the ground conditions permit, the most satisfactory type of pavement for long-term minimum maintenance is concrete . Although certain airports have used reinforcement in concrete pavements, this

150-480: A 7 will indicate 7,000 ft (2,134 m) remaining. The runway threshold is marked by a line of green lights. [REDACTED] There are three types of runways: Waterways may be unmarked or marked with buoys that follow maritime notation instead. For runways and taxiways that are permanently closed, the lighting circuits are disconnected. The runway threshold, runway designation, and touchdown markings are obliterated and yellow "Xs" are placed at each end of

200-479: A landing site for the Space Shuttle . Takeoff and landing distances available are given using one of the following terms: There are standards for runway markings. There are runway markings and signs on most large runways. Larger runways have a distance remaining sign (black box with white numbers). This sign uses a single number to indicate the remaining distance of the runway in thousands of feet. For example,

250-542: A periodic basis. Fields with very low traffic of light planes may use a sod surface. Some runways make use of salt flats. For pavement designs, borings are taken to determine the subgrade condition, and based on the relative bearing capacity of the subgrade, the specifications are established. For heavy-duty commercial aircraft, the pavement thickness, no matter what the top surface, varies from 10 to 48 in (25 to 122 cm), including subgrade. Airport pavements have been designed by two methods. The first, Westergaard ,

300-483: A projected annual capacity of 12 million tonnes (12,000,000 long tons; 13,000,000 short tons) of freight and between 160 million and 260 million passengers. As of 2021 , only a handful of airlines operated passenger services out of Al Maktoum International Airport with a focus on freight activity. Emirates plans to use the airport as its only hub once the first expansion is complete. Dubai International Airport will be shut down once Al Maktoum Airport expansion

350-462: A test for various functions such as air traffic control, movement of aircraft on the ground, and security. According to Emirates, the flight was an "unmitigated success". On 24 February 2011, the airport was certified to handle passenger aircraft with up to 60 passengers. The first passenger aircraft touched down on 28 February 2011, an Airbus A319CJ. The airport officially opened for passenger flights on 26 October 2013 with Flynas and Wizz Air as

400-415: A third parallel runway was opened at Phoenix Sky Harbor International Airport in 2000 to the south of existing 8R/26L—rather than confusingly becoming the "new" 8R/26L it was instead designated 7R/25L, with the former 8R/26L becoming 7L/25R and 8L/26R becoming 8/26. Suffixes may also be used to denote special use runways. Airports that have seaplane waterways may choose to denote the waterway on charts with

450-445: Is an extrapolation of the original test results, which are not applicable to modern aircraft pavements or to modern aircraft landing gear . Some designs were made by a mixture of these two design theories. A more recent method is an analytical system based on the introduction of vehicle response as an important design parameter. Essentially it takes into account all factors, including the traffic conditions, service life, materials used in

500-463: Is based on the assumption that the pavement is an elastic plate supported on a heavy fluid base with a uniform reaction coefficient known as the K value . Experience has shown that the K values on which the formula was developed are not applicable for newer aircraft with very large footprint pressures. The second method is called the California bearing ratio and was developed in the late 1940s. It

550-474: Is completed. The 4,500 m × 60 m (14,800 ft × 200 ft) runway was completed in 2007 after 600 days of construction with tests planned over the following six to eight months in order to fulfill its CAT III-C requirements. Construction of the airport's cargo terminal, the Al ;Maktoum Airport Cargo Gateway , which cost around US$ 75 million, was 50% complete by the end of 2008. During

SECTION 10

#1732848518103

600-399: Is considered to have the longest takeoff distance of the more common aircraft types and has set the standard for runway lengths of larger international airports. At sea level , 3,200 m (10,500 ft) can be considered an adequate length to land virtually any aircraft. For example, at O'Hare International Airport , when landing simultaneously on 4L/22R and 10/28 or parallel 9R/27L, it

650-431: Is different from Wikidata All article disambiguation pages All disambiguation pages Al Maktoum International Airport When fully completed (originally expected 2027, now in 2030 ), the airport will contain transport modes, logistics, and value-added services, including manufacturing and assembly, in a single free economic zone . It will cover an area of 36,000 acres (14,400 ha). The airport has

700-418: Is generally found to be unnecessary, with the exception of expansion joints across the runway where a dowel assembly, which permits relative movement of the concrete slabs, is placed in the concrete. Where it can be anticipated that major settlements of the runway will occur over the years because of unstable ground conditions, it is preferable to install asphalt concrete surface, as it is easier to patch on

750-408: Is included for all ICAO and some U.S. military airports (such as Edwards Air Force Base ). However, most U.S.  civil aviation airports drop the leading zero as required by FAA regulation. This also includes some military airfields such as Cairns Army Airfield . This American anomaly may lead to inconsistencies in conversations between American pilots and controllers in other countries. It

800-454: Is most nearly aligned with the wind. Airports with one runway are often constructed to be aligned with the prevailing wind . Compiling a wind rose is one of the preliminary steps taken in constructing airport runways. Wind direction is given as the direction the wind is coming from : a plane taking off from runway 09 faces east, into an "east wind" blowing from 090°. Originally in the 1920s and 1930s, airports and air bases (particularly in

850-567: Is routine for arrivals from East Asia , which would normally be vectored for 4L/22R (2,300 m (7,546 ft)) or 9R/27L (2,400 m (7,874 ft)) to request 28R (4,000 m (13,123 ft)). It is always accommodated, although occasionally with a delay. Another example is that the Luleå Airport in Sweden was extended to 3,500 m (11,483 ft) to allow any fully loaded freight aircraft to take off. These distances are also influenced by

900-451: Is slow, runway designation changes are uncommon, and not welcomed, as they require an accompanying change in aeronautical charts and descriptive documents. When a runway designation does change, especially at major airports, it is often done at night, because taxiway signs need to be changed and the numbers at each end of the runway need to be repainted to the new runway designators. In July 2009 for example, London Stansted Airport in

950-459: Is usually adequate for aircraft weights below approximately 100,000 kg (220,000 lb). Larger aircraft including widebodies will usually require at least 2,400 m (7,900 ft) at sea level. International widebody flights, which carry substantial amounts of fuel and are therefore heavier, may also have landing requirements of 3,200 m (10,500 ft) or more and takeoff requirements of 4,000 m (13,000 ft). The Boeing 747

1000-557: Is very common in a country such as Canada for a controller to clear an incoming American aircraft to, for example, runway 04, and the pilot read back the clearance as runway 4. In flight simulation programs those of American origin might apply U.S. usage to airports around the world. For example, runway 05 at Halifax will appear on the program as the single digit 5 rather than 05. Military airbases may include smaller paved runways known as "assault strips" for practice and training next to larger primary runways. These strips eschew

1050-557: The House of Maktoum which rules the Emirate of Dubai. The total cost of the airport has been estimated by the Dubai government to be $ 82 billion. Al Maktoum International Airport opened on 24 June 2010 with one runway and only cargo flights. The first flight into the airport occurred on 20 June 2010, when an Emirates SkyCargo Boeing 777F landed after a flight from Hong Kong. The flight served as

SECTION 20

#1732848518103

1100-582: The International Civil Aviation Organization (ICAO), a runway is a "defined rectangular area on a land aerodrome prepared for the landing and takeoff of aircraft ". Runways may be a human-made surface (often asphalt , concrete , or a mixture of both) or a natural surface ( grass , dirt , gravel , ice , sand or salt ). Runways, taxiways and ramps , are sometimes referred to as "tarmac", though very few runways are built using tarmac . Takeoff and landing areas defined on

1150-646: The United Kingdom changed its runway designations from 05/23 to 04/22 during the night. Runway dimensions vary from as small as 245 m (804 ft) long and 8 m (26 ft) wide in smaller general aviation airports, to 5,500 m (18,045 ft) long and 80 m (262 ft) wide at large international airports built to accommodate the largest jets , to the huge 11,917 m × 274 m (39,098 ft × 899 ft) lake bed runway 17/35 at Edwards Air Force Base in California – developed as

1200-461: The United Kingdom) were built in a triangle-like pattern of three runways at 60° angles to each other. The reason was that aviation was only starting, and although it was known that wind affected the runway distance required, not much was known about wind behaviour. As a result, three runways in a triangle-like pattern were built, and the runway with the heaviest traffic would eventually expand into

1250-551: The aircraft tyres. To maintain the macrotexturing built into the runway by the grooves, maintenance crews engage in airfield rubber removal or hydrocleaning in order to meet required FAA , or other aviation authority friction levels. Subsurface underdrains help provide extended life and excellent and reliable pavement performance. At the Hartsfield Atlanta, GA airport the underdrains usually consist of trenches 18 in (46 cm) wide and 48 in (120 cm) deep from

1300-507: The airport is expected to be the largest in the world at roughly five times the size of the existing Dubai International Airport with capacity for up to 260 million passengers. Plans call for the airport to include five parallel runways and 400 aircraft gates. All Emirates and Flydubai operations are expected to be transferred to the new airport by 2030. The following airlines offer regular scheduled and charter services to and from Al Maktoum International: Runway According to

1350-447: The airport's main runway, while the other two runways would be either abandoned or converted into taxiways. Runways are named by a number between 01 and 36, which is generally the magnetic azimuth of the runway's heading in deca degrees . This heading differs from true north by the local magnetic declination . A runway numbered 09 points east (90°), runway 18 is south (180°), runway 27 points west (270°) and runway 36 points to

1400-537: The ambiguity that would result with more than three parallel runways. For example, in Los Angeles, this system results in runways 6L, 6R, 7L, and 7R, even though all four runways are actually parallel at approximately 69°. At Dallas/Fort Worth International Airport , there are five parallel runways, named 17L, 17C, 17R, 18L, and 18R, all oriented at a heading of 175.4°. Occasionally, an airport with only three parallel runways may use different runway identifiers, such as when

1450-411: The construction, and, especially important, the dynamic response of the vehicles using the landing area. Because airport pavement construction is so expensive, manufacturers aim to minimize aircraft stresses on the pavement. Manufacturers of the larger planes design landing gear so that the weight of the plane is supported on larger and more numerous tires. Attention is also paid to the characteristics of

1500-486: The first half of 2016 totaled 410,278, up from 209,989 in the first half of 2015. Low usage of the facility led to it being described as a white elephant . On 28 April 2024, Emirates announced that the ruler of Dubai, Sheikh Mohammed bin Rashid al-Maktoum , had approved a major expansion of Al Maktoum International Airport with the construction of a new 128 billion AED ($ 34.85 billion USD) passenger terminal. When complete,

1550-544: The first phase of the project, the airport was planned to handle around 200,000 t (200,000 long tons; 220,000 short tons) of cargo per year, with the possibility of increasing to 800,000 t (790,000 long tons; 880,000 short tons). The passenger terminal at this phase was designed to have a capacity of 5 million passengers per year. It was planned to be the largest airport in the world in terms of freight handled, moving up to 12 million tonnes (12,000,000 long tons; 13,000,000 short tons) per year in 2013. The project

DWC - Misplaced Pages Continue

1600-631: The following: According to Transport Canada 's regulations, the runway-edge lighting must be visible for at least 2 mi (3 km). Additionally, a new system of advisory lighting, runway status lights , is currently being tested in the United States. The edge lights must be arranged such that: Typically the lights are controlled by a control tower , a flight service station or another designated authority. Some airports/airfields (particularly uncontrolled ones ) are equipped with pilot-controlled lighting , so that pilots can temporarily turn on

1650-496: The lack of designated landing direction. If there is more than one runway pointing in the same direction (parallel runways), each runway is identified by appending left (L), center (C) and right (R) to the end of the runway number to identify its position (when facing its direction)—for example, runways one-five-left (15L), one-five-center (15C), and one-five-right (15R). Runway zero-three-left (03L) becomes runway two-one-right (21R) when used in

1700-432: The landing gear itself, so that adverse effects on the pavement are minimized. Sometimes it is possible to reinforce a pavement for higher loading by applying an overlay of asphaltic concrete or portland cement concrete that is bonded to the original slab. Post-tensioning concrete has been developed for the runway surface. This permits the use of thinner pavements and should result in longer concrete pavement life. Because of

1750-409: The lights when the relevant authority is not available. This avoids the need for automatic systems or staff to turn the lights on at night or in other low visibility situations. This also avoids the cost of having the lighting system on for extended periods. Smaller airports may not have lighted runways or runway markings. Particularly at private airfields for light planes, there may be nothing more than

1800-458: The nearest 10°, this affects some runways sooner than others. For example, if the magnetic heading of a runway is 233°, it is designated Runway 23. If the magnetic heading changes downwards by 5 degrees to 228°, the runway remains Runway 23. If on the other hand the original magnetic heading was 226° (Runway 23), and the heading decreased by only 2 degrees to 224°, the runway becomes Runway 22. Because magnetic drift itself

1850-521: The need for "distinctly marked and carefully prepared landing places, [but] the preparing of the surface of reasonably flat ground [is] an expensive undertaking [and] there would also be a continuous expense for the upkeep." For fixed-wing aircraft , it is advantageous to perform takeoffs and landings into the wind to reduce takeoff or landing roll and reduce the ground speed needed to attain flying speed . Larger airports usually have several runways in different directions, so that one can be selected that

1900-581: The north (360° rather than 0°). When taking off from or landing on runway 09, a plane is heading around 90° (east). A runway can normally be used in both directions, and is named for each direction separately: e.g., "runway 15" in one direction is "runway 33" when used in the other. The two numbers differ by 18 (= 180°). For clarity in radio communications, each digit in the runway name is pronounced individually: runway one-five, runway three-three, etc. (instead of "fifteen" or "thirty-three"). A leading zero, for example in "runway zero-six" or "runway zero-one-left",

1950-589: The opposite direction (derived from adding 18 to the original number for the 180° difference when approaching from the opposite direction). In some countries, regulations mandate that where parallel runways are too close to each other, only one may be used at a time under certain conditions (usually adverse weather ). At large airports with four or more parallel runways (for example, at Chicago O'Hare , Los Angeles , Detroit Metropolitan Wayne County , Hartsfield-Jackson Atlanta , Denver , Dallas–Fort Worth and Orlando ), some runway identifiers are shifted by 1 to avoid

2000-478: The runway grade (slope) such that, for example, each 1 percent of runway down slope increases the landing distance by 10 percent. An aircraft taking off at a higher altitude must do so at reduced weight due to decreased density of air at higher altitudes, which reduces engine power and wing lift. An aircraft must also take off at a reduced weight in hotter or more humid conditions (see density altitude ). Most commercial aircraft carry manufacturer's tables showing

2050-406: The runway and at 1,000 ft (305 m) intervals. A line of lights on an airfield or elsewhere to guide aircraft in taking off or coming in to land or an illuminated runway is sometimes also known as a flare path . Runway lighting is used at airports during periods of darkness and low visibility. Seen from the air, runway lights form an outline of the runway. A runway may have some or all of

DWC - Misplaced Pages Continue

2100-403: The same term [REDACTED] This disambiguation page lists articles associated with the title DWC . If an internal link led you here, you may wish to change the link to point directly to the intended article. Retrieved from " https://en.wikipedia.org/w/index.php?title=DWC&oldid=1034607949 " Category : Disambiguation pages Hidden categories: Short description

2150-623: The standard numerical naming convention and instead employ the runway's full three digit heading; examples include Dobbins Air Reserve Base 's Runway 110/290 and Duke Field 's Runway 180/360. Runways with non-hard surfaces, such as small turf airfields and waterways for seaplanes , may use the standard numerical scheme or may use traditional compass point naming, examples include Ketchikan Harbor Seaplane Base 's Waterway E/W. Airports with unpredictable or chaotic water currents, such as Santa Catalina Island 's Pebbly Beach Seaplane Base, may designate their landing area as Waterway ALL/WAY to denote

2200-414: The suffix T; this is advantageous for certain airfields in the far north such as Thule Air Base (08T/26T). Runway designations may change over time because Earth's magnetic lines slowly drift on the surface and the magnetic direction changes. Depending on the airport location and how much drift occurs, it may be necessary to change the runway designation. As runways are designated with headings rounded to

2250-567: The suffix W; such as Daniel K. Inouye International Airport in Honolulu and Lake Hood Seaplane Base in Anchorage . Small airports that host various forms of air traffic may employ additional suffixes to denote special runway types based on the type of aircraft expected to use them, including STOL aircraft (S), gliders (G), rotorcraft (H), and ultralights (U). Runways that are numbered relative to true north rather than magnetic north will use

2300-633: The surface of water for seaplanes are generally referred to as waterways . Runway lengths are now commonly given in meters worldwide , except in North America where feet are commonly used. In 1916, in a World War I war effort context, the first concrete-paved runway was built in Clermont-Ferrand in France , allowing local company Michelin to manufacture Bréguet Aviation military aircraft. In January 1919, aviation pioneer Orville Wright underlined

2350-441: The susceptibility of thinner pavements to frost heave , this process is generally applicable only where there is no appreciable frost action . Runway pavement surface is prepared and maintained to maximize friction for wheel braking. To minimize hydroplaning following heavy rain, the pavement surface is usually grooved so that the surface water film flows into the grooves and the peaks between grooves will still be in contact with

2400-547: The top of the pavement. A perforated plastic tube (5.9 in (15 cm) in diameter) is placed at the bottom of the ditch. The ditches are filled with gravel size crushed stone. Excessive moisture under a concrete pavement can cause pumping, cracking, and joint failure. In aviation charts, the surface type is usually abbreviated to a three-letter code. The most common hard surface types are asphalt and concrete. The most common soft surface types are grass and gravel. A runway of at least 1,800 m (5,900 ft) in length

2450-401: The two carriers to operate from the airport. In the first quarter of 2014, 102,000 passengers went through the airport. At the time of its opening, three cargo service airlines served Al Maktoum International Airport, including RUS Aviation , Skyline Air and Aerospace Consortium. Fifteen additional airlines then signed a contract to operate flights to the airport. Passenger numbers in

2500-482: Was originally expected to be fully operational by 2017, although the 2007–2008 financial crisis subsequently postponed the completion of the complex to 2027. Previous working names for the airport complex have included "Jebel Ali International Airport", "Jebel Ali Airport City", and "Dubai World Central International Airport". The airport was eventually named the Al Maktoum International Airport after

#102897