21-554: The Parker-Hale Model 82 (M82) is the military version of the Parker-Hale 1200TX target rifle; it was accepted for service by several nations for both military and police use. In appearance and design terms the Model 82 is an entirely conventional sniping weapon. It uses a manual bolt action the same as the classic Mauser 98 rifle, allied to a heavy free-floating barrel chambered for the 7.62×51mm NATO round. The barrel weighs 1.98 kg and
42-500: A 1:12 turn ratio with 4 right hand twists. The action is a Mauser-style rotating bolt type. It has 3 stainless steel locking lugs at the front and rear of the bolt. The C3 safety is a thumb activated lever above the magazine which locks the trigger, bolt and sear giving ultimate protection against an accidental discharge. The standard sight on the revamped model C3A1 is an Unertl 10× zoom scope which can only be used for daytime engagements as its lacks any night vision capabilities. It has
63-574: A Kahles Helios ZF 69 6×42 scope. After a couple of years, it was upgraded to the C3A1 with a few modifications. The C3 was updated to the C3A1 and a number of modifications were made including the addition of a 10× Unertl scope currently in use by the United States Marine Corps . A fiberglass McMillan A2 stock was fitted along with a Parker-Hale made bipod for more stability and support while aiming in
84-467: A duplex crosshair with a mil dot style scale in increments of 200m up to 1000m. It can also be used with the default iron sights . The stock for the C3A1 is one piece walnut or fibreglass stock with an internal bedding of either Devlon, Aluminum or Steel putty. The fibreglass version is called the Mcmillan A2 stock and can be painted in any camouflage scheme depending on environment. The Parker Hale L81A1
105-697: Is a shorter version of the Parker Hale M82 rifle 7.62×51mm (.308) rifle, adopted as a cadet rifle in addition to the .22 LR Rifle No.8 . It can trace its lineage back through both the M82 sniper rifle and the Parker-Hale 1200TX target rifle. The Parker Hale L81A2 , officially known as the L81A2 Cadet Target Rifle (CTR), the L81A2 replaced the L81A1 following reports of technical safety issues, including bulges in
126-424: Is manufactured from chrome molybdenum steel. The Model 82 has an integral four-round magazine and an entirely self-contained trigger unit which can be adjusted as required. The M82 was available in a number of forms to suit any customer requirements. Thus an adjustable cheek pad may have been provided if wanted, and the butt lengths can be altered by adding or taking away butt spacers of various thicknesses. The rifle
147-478: The Birmingham Proof House , where it continued with the reconditioning of .22 LR weapons for junior training organisations. The company ceased to exist upon completion of the contracts. The immediate post-war years can best be described as a period of frustrated opportunity, since overseas markets were opened but materials of all sorts were in short supply. Nevertheless, by 1948 business abroad far exceeded
168-515: The prone position. During Operation APOLLO Canadian sniper Master Corporal Graham Ragsdale recorded 20 confirmed kills with the C3A1. It has also been used as a competition rifle. The C3A1 has been withdrawn from the Canadian Army and has been replaced by the C14 Timberwolf rifle Medium Range Sniper Weapon System. Instead it is used for the training of snipers due to its similarities with
189-623: The C14 Timberwolf rifle. Its decline was due to a lack of parts due to the ending of production of firearms by Parker Hale in 2000 and the cesstion of C3A1 production in 1984. Parker Hale offered the C3A1 as a complete kit known as the M85 on the civilian market. Common confusion occurs but no M82 was fitted with detachable magazines or enlarged bolt knob. Other Canadian snipers recorded high hit ratios and some extremely difficult shots. These marksmen remain anonymous. Parker-Hale Parker-Hale Ltd.
210-688: The Parker and Hale families. A first catalogue was issued of arms and shooting accessories and, though limited in its range, clearly showed the company's growing trend for the development of accessories. By 1914 the company's small manufacturing plant was well established and the Ministry of Munitions ordered training equipment from Parker-Hale. The "Parkerifling" process, coupled with the Hiscock-Parker magazine, enabled service rifles to be converted to .22 Long Rifle (.22 LR) for use as training rifles, and demand
231-751: The barrel and is used by the ATC , ACF , SCC and CCF in competitions such as the Ashburton Shield staged annually in July by the Council for Cadet Rifle Shooting (CCRS), and the Inter Service Cadet Rifle Meeting (ISCRM), held at Bisley ranges . The C3 was adopted by the Canadians in 1972 and was based on the Parker Hale M82. Its stock was made of wood with a front beavertail and an accessories rail. It had
SECTION 10
#1732859153213252-506: The company in what was to prove a constantly changing industry. Lacking the investment necessary to enable the company to compete effectively in newly emerging markets, Parker-Hale was eventually sold to the Midlands engineering group, Modular Industries Ltd. In 1992 it was purchased by Navy Arms and spun off as Gibbs Rifle Company, Inc. Submachine guns : Shotguns : Rifles : Bipod Too Many Requests If you report this error to
273-503: The company's comprehensive range of rifle scopes, knives, gun care accessories and cleaning kits. The company received a temporary setback in 1985 when the Chairman and Managing Director, John le Breton, who had been instrumental in consolidating the company's success in world markets, retired from the board. The founder's grandson, Roger Hale, then took over as Managing Director, and proved an influential figure in successfully re-positioning
294-673: The front sight slid off, but the front block/post remained. Two mounting blocks were fitted to the receiver for the purpose of the fitting of optical sight mounts, supplied with the Parker Hale are the parkerized aluminium scope rings; rifles that were in service in the Australian and New Zealand armies used the Austrian Kahles Wien ZF-69 6×42 (26mm tube) drop compensation telescopic sight set in 100m increments out to 800m, with fine crosshair. Some attempts at refurbishing and rebarrelling
315-721: The home trade. Positioned alongside the BSA factory sportsground and Sparkbrook , from which the local area gets its name, the Parker-Hale factory headquarter building echoes the traditions of the Birmingham gunmaking industry, since it occupies the very site that the Proof House located their testing range. Business at Parker-Hale remained relatively stable throughout the 1960s and into the 1980s, with sales of target and sporting rifles, handguns, shotguns and ammunition sitting comfortably alongside
336-531: The manufacture of .30-06 Springfield and .303 British drill cartridges in large quantities. After the close of hostilities, with a fall in production contracts and no permanent premises, the company had little choice but to invest in a small factory unit, erected under the Government's emergency programme to re-house bombed-out manufacturers. Meanwhile, the Parker-Hale Arms Company was transferred to
357-510: The outbreak of the Second World War , the available resources of the gun trade had been mobilised to recondition a reserve of Pattern 1914 Enfield rifles, and in 1940 the Parker-Hale Arms Company was founded. Additional premises were acquired "for the duration" of the war and, under the management of Arthur Hale, a large reconditioning programme was rapidly carried through. A wide range of additional war contract work followed, principally with
378-480: The rifles resulted in usage of one piece scope mounts but this proved unsatisfactory. The action and barrel were originally finished by parkerizing then completed with a black rubberised style non-reflecting coating. The barrel for the Canadian C3A1 is a heavy, fully free floating barrel chambered for the 7.62×51mm NATO round. It has a weight of 2.04 kg/4.5 lbs and a length of 60 cm. Rifling follows
399-483: Was a British firearms , air rifle and firearms accessory manufacturer, located in the Gun Quarter of the city of Birmingham , England . It was founded by Alfred Gray Parker and Arthur Hale. Alfred Gray Parker founded a rifle manufacturing company in 1890. In 1910, he invited his nephew, Alfred Thomas Corbyn Hale, to become a partner in the limited liability company , with the shares being taken up by members of both
420-404: Was basically a standard target 7.62×51mm NATO heavy-barreled Mauser 98 with a wide beaver tail target walnut stock (with inset handstop rail) and a Parker Hale trigger with its side safety mechanism. The sights were subject to several variations, but the standard Model 82 was normally supplied with removable 'iron' match-type sight blocks. If an optical sight is fitted the rear-sight was removed, and
441-454: Was such that the Parker-Hale factory was soon working to full capacity. In 1924, Hale's son, Arthur, joined the business, and in 1926 a family record was set up when Hale and his two eldest sons took part in the "King's Prize" at Bisley . This event was eclipsed two years later when Arthur Hale succeeded in winning the coveted prize itself. He was appointed Director of the Company in 1928. With
SECTION 20
#1732859153213#212787