Misplaced Pages

Buick Park Avenue

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

The Buick Park Avenue is a full-size car built by Buick . The nameplate was first used in 1975 for an appearance option package on the Electra 225 Limited . It became an Electra trim level in 1978 and its own model starting in the 1991 model year after the Electra was discontinued.

#96903

124-680: There were two generations of the Park Avenue that were manufactured in the United States until 2005. In 2007, the nameplate was revived on a large Buick sedan built by Shanghai GM for the Chinese market based on the Holden Caprice from the WM/WN range. The nameplate is derived from the affluent New York City boulevard , Park Avenue . 1975-1976 Park Avenue first appeared as an appearance package on

248-523: A 13% market share in mainland China, second only to Volkswagen Group China among foreign carmakers. Sales dropped in 2004 when the company retired the Buick Sail and the release of its replacement, the Chevrolet Sail , was delayed to February 2005, knocking General Motors Shanghai to seventh place in mainland China market share. SAIC-GM market share climbed back to nearly 9.8 percent, placing SAIC-GM among

372-461: A 350 four-barrel and 455 four-barrel V8s, both carried over from 1973 with revisions to meet the 1974 emission standards. New engine options for 1974 included a 455 two-barrel and the Stage 1 455 "performance package" which added dual exhausts, suspension upgrades and other equipment. New options for 1974 included radial-ply tires, GM's High Energy Ignition and a "low fuel" warning light that illuminated when

496-596: A badge mounted directly to the hood rather than an ornament, stronger seat belt and anchors, "softer" air bags, metric speedometer and gauges. They are to comply with the European regulatory and safety standards . This generation of the Park Avenue was the last Buick to be officially marketed by GM in Europe. This move was to reduce the "cluttered" model range that confused the European consumers. After 1996, Cadillac and Chevrolet remained

620-473: A bit lighter in weight for improved fuel economy along with the slightly more aerodynamic sheet metal which made the 1980 models look a little bigger than their 1977–79 counterparts but overall dimensions changed very little. Engine offerings were shuffled a bit for 1980 with the standard Buick 231 V6 and optional 350 V8 carried over from 1979, with the Buick 350 making its last appearance this year. New options included

744-419: A chrome square grille somewhat similar to the 1958 Buick and "Delta-wing" fins back along with round taillights. The appearance was shared with two other Buick models, the mid-level Invicta and the top model Electra . While Invicta and Electra/225 models were powered by Buick's new 401-cubic-inch V8, LeSabre continued with the 364-cubic-inch V8 previously used in all Buicks in 1957 and 1958. In standard form,

868-472: A conventional horizontal sweep unit. The 1963 LeSabre received a major facelift with even boxier body contours than 1961-62 models and revised rooflines on four-door hardtop sedans. Inside was a new instrument panel with round instruments shared with other big Buicks and the new personal-luxury Riviera coupe. New options this year included a seven-position tilt steering wheel/column, AM/FM radio and Electro-Cruise control. The same assortment of 401-cubic-inch V8s

992-627: A federal safety mandate. The 1969 LeSabre and other Buicks also received a new steering column mounted ignition switch (relocated from the instrument panel) that also locked the steering wheel when the transmission was in Park. The ignition/locking steering column appeared on all 1969 General Motors cars one year ahead of the federal mandate requiring all cars to be so equipped. Also new was a variable-ratio power steering unit along with revised front suspension geometry for improved ride and handling under Buick's tradename of Accu-Drive. Steel rails were also built into

1116-715: A full-sized station wagon for 1970 under the Estate Wagon nameplate. Though it used the LeSabre's B-body, it rode on the C-body Electra 225's 127-inch (3,200 mm) wheelbase chassis. The Estate Wagon came standard with the 455 V8 and interior trims were similar to the LeSabre Custom and Wildcat. The 1965-70 GM B platform is the fourth best selling automobile platform in history after the Volkswagen Beetle , Ford Model T and

1240-456: A hood ornament while the Ultra had a less conspicuous tri-shield inset on the upper edge of the grille. The base Park Avenue was the last USDM Buick to carry a factory hood ornament. For 2001, the base model's cloth interior was dropped as an option in favor of standard leather trim. Ultrasonic rear park assist was a new option that year as well. For 2003, trademark Buick " Ventiports " returned on

1364-503: A larger Buick-built 252 V6, an Oldsmobile-built 307 V8 and a 350 Diesel V8, also built by Oldsmobile. The LeSabre Sport Coupe continued with the four-barrel turbocharged 231 V6 as its standard and only available powerplant. The Sport Coupe was dropped from the line after 1980 along with the Turbo V6 engine due to slow sales, but the Turbo V6 continued on the Regal and Riviera. Following the demise of

SECTION 10

#1732859211097

1488-486: A major facelift, the new body design sharing only the roof and trunk lid with the 1959 model. The new Buick now sported a concave grille and horizontal headlights centered by Buick's then-new "Tri-Shield" logo, which is still in use today. Reintroduced to Electras and other Buicks for 1960 were the chrome " VentiPort " portholes first introduced in 1940 and last seen in 1957. LeSabre and Invicta models had three portholes while Electras and Electra 225s were "four-holers". Inside,

1612-492: A new flat instrument panel shared with Electra and Riviera replaced the wrap-around cockpit dash of previous years and featured a horizontal sweep speedometer that read to only 100 mph compared to 120 mph in previous years and also included kilometer readings. Otherwise, interior trimmings received only minor revisions. Convertible production for both the LeSabre Custom and the Centurion convertibles were not very abundant in

1736-483: A new no-cost option was a 235-horsepower lower-compression two-barrel version of the 364 with a lower compression ratio to permit use of regular-grade gasoline instead of the premium fuel required with all other Buick engines. LeSabre and all other full-sized Buicks (joined by the compact Special this year) were completely restyled for 1961 featuring finless rear ends, more restrained use of chrome, and boxier sheetmetal. Wheelbases remained at 123 inches (3,100 mm) but

1860-522: A new option for this model only were Strato bucket seats with center console. This would be the final year for the Pontiac 301 and Oldsmobile 403 V8s on the option list. New sheet metal highlighted by new swept back grilles/headlights, new taillights and revised coupe rooflines were among the changes to the 1980 Buick LeSabre aside from the complete disappearance of Buick's traditional portholes (the C-body Electra would retain them until 1984). The cars were also

1984-415: A new top design to permit a full-width rear seat. The same assortment of 350 and 455 cubic-inch V8s were carried over but featured lowered compression ratios and other modifications in order to enable the use of lower-octane low-lead or unleaded gasoline as a result of a General Motors corporate mandate. Variable-ratio power steering and power front disc brakes were made standard equipment on all LeSabres at

2108-417: A padded instrument panel, outside driver-side rear view mirror and backup lights. Under the hood, the 300-cubic-inch V8 was replaced by a larger 340-cubic-inch V8 rated at 220 horsepower with two-barrel carburetor and available with either a standard three-speed manual transmission or optional two-speed automatic, but the four-speed manual was dropped from the option list. Ordering the LeSabre 400 option upgraded

2232-518: A raised rear roof and glass skylight over the back seat similar to the Oldsmobile Vista Cruiser . Starting in 1965, the LeSabre was available in two trim levels , the base LeSabre and the LeSabre Custom, which featured a more luxurious interior trim and also included the convertible body style not available in the base LeSabre line. Interiors were also new for 1965 with a revised instrument panel featuring two round dials nearly identical with

2356-468: A revised instrument panel featured "Mirromatic", where the speedometer, odometer and any warning light indicators are reflected from an adjustable tilt mirror inside the dashboard for comfortable viewing that would reduce unwanted glare and reflection. A new two-spoke steering wheel with horn bars was introduced, replacing the time-honored horn ring then still common to most automobiles. The 250- and 300-horsepower 364-cubic-inch V8s were continued from 1959, but

2480-469: A small number of cars were so equipped. Automatic transmissions would once again reappear as standard equipment on LeSabres in mid-1971 and continue in such form until the model line's demise after 2005. LeSabres were rear-drive six-passenger vehicles from 1959 to 1985 (station wagons through 1990) featuring separate body-on-frame construction along with a longitudinally mounted front engine. The first downsized generation of LeSabres introduced in 1977 retained

2604-484: A standard three-speed manual with column shift for the base 350 two-barrel or optional three-speed Turbo Hydra-matic 350 automatic, which was standard equipment with the two 350 four-barrel engines. This transmission completely replaced the old two-speed automatic offered with the smaller base engines in past years, while the 455 was paired with the Turbo Hydra-matic 400. Buick now joined other GM divisions in marketing

SECTION 20

#1732859211097

2728-509: A stereo 8-track tape player. The standard drum brakes were upgraded with more cooling fins and a dual-master cylinder system was introduced. Engine and transmission offerings were unchanged from 1966. The 1968 LeSabre received a minor facelift including new grilles and taillights along with concealed windshield wipers. Inside was a revised instrument panel with square speedometer surrounded by other instruments with minor trim revisions for both base and Custom models. A new 350-cubic-inch V8 replaced

2852-486: A turbocharged 231 cubic-inch V6 with a four-barrel carburetor producing 165 BHP (SAE Net) at 4000 RPM and a rather useful 285 lb-ft at 2,800 rpm. Only minor changes including new grille and rear taillight patterns highlighted the 1979 LeSabre aside from the top-level LeSabre Custom of previous years being renamed the LeSabre Limited. The LeSabre Sport Coupe continued with the turbocharged V6 as standard equipment and

2976-483: A two-barrel high-compression (10.25 to 1) version rated at 280 horsepower with a low-compression regular fuel version of that same engine rated at 265 horsepower offered as a no-cost option. Optional at extra cost was the four-barrel 325-horsepower 401 which was standard on the Invicta, Electra 225 and the mid-year Invicta-based Wildcat coupe. Inside, interiors were mildly revised with the "Mirrormatic" speedometer replaced by

3100-612: Is French for "the sabre ", was Buick's mid-level full-size sedan above the Special but below the Electra during the 1960s then remained in its market position when the Electra was replaced with the Park Avenue . The LeSabre was available as a 2-door convertible, sedan or hardtop, a 4-door sedan or hardtop and station wagon throughout its production. The LeSabre nameplate made its first appearance on

3224-535: Is a joint venture between General Motors Company and SAIC Motor . The company was founded in 1997 as Shanghai General Motors Company Ltd or Shanghai GM ( Chinese : 上海通用汽车 ). Headquartered in Shanghai , the company manufactures and sells Chevrolet , Buick , and Cadillac brand automobiles in mainland China , and exports its cars to several overseas markets. SAIC-GM was founded on June 12, 1997, with 50% investment each from each partner. SAIC-GM began assembling

3348-599: The 1975 Buick Electra Limited . It included similar seats to the Cadillac Sixty Special , optional full center console, Buick 455ci V8 , posi-traction, 15-inch rallye sport wheels, rear automatic leveling, optional leather, optional Air Cushion Restraint System , remote mirror with thermometer, and automatic climate control. The 1976 cars were largely the same except for some styling revisions and added emissions systems. 1977-1984 Park Avenue, previously an appearance option package, became an official trim level on

3472-569: The Lada Riva . Like the other GM divisions, Buick completely restyled its B- and C-body cars for 1971. The full-size cars emerged larger and heavier than before and also ever after. The styling featured curved bodysides, long hoods and wide expanses of glass, similar to that of Chrysler Corporation's 1969 full-sized cars, but with a lower beltline than the Chrysler products. Semi-fastback rooflines were utilized on two-door hardtop coupes and convertibles had

3596-463: The Ultra came with a 3.8 L supercharged V6 engine and leather interior. The Park Avenue received various exterior and interior cosmetic changes, as well as powertrain updates, during this run. Some of the new options and features added to the first generation included driver (and later passenger) airbags, dual-zone climate control, traction control, and variable-effort steering (Ultra only). The Park Avenue

3720-479: The 1951 Le Sabre show car , which introduced the world to aircraft-inspired design elements such as the wrap-around windshield and tail fins. In 1959 LeSabre became the new moniker for what had previously been known as the Buick Special . The Buick LeSabre was offered in a full line of body styles except between 1965 and 1969 when its station wagon variant was dropped from Buick's full-size offerings. In 1977,

3844-458: The 1965 model year, featuring more rounded bodylines and Coke-bottle profiles with semi-fastback rooflines on two-door hardtop coupes. Wheelbases remained at 123 inches (3,100 mm), but a new perimeter frame shared with other GM B-body cars replaced the "X" frame used since 1961. Body styles were unchanged from 1964 except for the station wagon, which was dropped in favor of the stretched intermediate Special-based Buick Sport Wagon which featured

Buick Park Avenue - Misplaced Pages Continue

3968-459: The 1970 LeSabre. New features this year included a hidden radio antenna which amounted to two wires embedded in the windshield. Wheelbase was increased by one inch to 124 inches (3,100 mm), matching direct competitors such as Oldsmobile Delta 88, Mercury Monterey and Chrysler Newport. Both base and Custom models were again offered. Engines were revised with the standard 350 two-barrel V8 increased in horsepower from 230 to 260. A new option for 1970

4092-415: The 1972 federal and California emission standards with California-bound cars receiving EGR valves, which would be installed on engines of virtually all automobiles for nationwide sales in 1973. Inside, the instrument panel featured a new "FASTEN SEAT BELTS" light due to a new federal safety regulation and the buzzer which sounded when the key was left in the ignition also sounded upon starting the car to remind

4216-443: The 1977 Buick LeSabre was considerably smaller on the outside, headroom, rear seat legroom and trunk space were increased over the much larger 1976 model. The engine lineup consisted of an assortment of engines including the standard 231 cubic-inch Buick-built V6 and various optional powerplants including a Pontiac-built 301 cubic-inch V8, 350 cubic-inch V8s built by both Buick and Oldsmobile, and an Oldsmobile 403 cubic-inch V8. The V6

4340-407: The 1981 LeSabre, still offered in base and Limited models. The modified grille now had five (rather than four) rows of openings. Engine offerings included the 231 cubic-inch normally aspirated Buick V6 (standard on sedans and coupes although decidedly underpowered for a car weighing in at around 4,000 lbs.), or optional Olds 307 cubic-inch V8 (standard on wagons, optional on sedans and coupes) and

4464-463: The 300 was rated at 210 horsepower with two-barrel carburetor and 9 to 1 compression ratio for use of regular fuel. Optionally available was a 250-horsepower version of the same engine with four-barrel carburetor and higher 11 to 1 compression ratio mandating the use of premium fuel. The LeSabre Estate Wagon came standard with the larger 325-horsepower 401 V8 from the Wildcat and Electra 225 models. Replacing

4588-452: The 350 cubic-inch Oldsmobile-built diesel V8 (optional on all models). All gasoline engines received GM's "Computer Command Control" system to control fuel mixture, spark advance, and emissions controls. The three-speed Turbo Hydra-Matic transmission was standard equipment with the V6 and the diesel V8. New this year was a Turbo Hydra-Matic 200 4-R four-speed automatic overdrive transmission paired with

4712-406: The 455 V8 and hardtop bodystyles. Changes included rectangular quad headlights placed into a unit with the turn signals set directly below and at the center was a new classic eggcrate grille, no longer integrated with the headlights, making it more prominent. The 1976 LeSabre was the only American full-size car with a standard V6 engine, which was Buick's brand-new 3.8-litre (231 CID) V6 engine. The V6

4836-628: The Buick 350 V8 after this year, Buick would only build V6 engines as a result of GM's emerging corporate engine policy dictating types of engines built by various divisions for use throughout the corporate lineup. According to the plan, Buick would build V6 engines, Pontiac would manufacture four-cylinder powerplants, Chevrolet would build four-cylinder, V6 and V8 engines, and V8s for larger and higher-priced cars would be sourced from Oldsmobile and Cadillac. This meant that from 1981 onward, V8-powered Buicks would feature Oldsmobile engines, both gasoline and diesel. Only minor grille and trim changes highlighted

4960-848: The Caribbean since 2017 until 2023, when SAIC-GM-Wuling took over the development and production of the Sail/Aveo. In 2016, General Motors started importing the Buick Envision into the US from China. The Envision is built by SAIC-GM at its Dongyue Motors plant. Buick expected to sell 40,000 to 50,000 units of the Envision annually in North America. Since 2020, SAIC-GM also exports the Chevrolet Equinox to Uzbekistan . SAIC-GM also assisted UzAuto Motors ,

5084-625: The Chinese market. SAIC-GM is the largest joint venture GM has in China. In February 2010, SAIC acquired an additional 1 percent stake in the joint venture for US$ 85 million and assistance in securing a US$ 400 million line of credit to boost SAIC's total share of SAIC-GM to 51%. In April 2012, GM regained 50% control of the joint venture. In September 2006, General Motors launched the Chevrolet Corsa Plus in Chile built by SAIC-GM, an export version of

Buick Park Avenue - Misplaced Pages Continue

5208-471: The Electra in 1978. Cosmetically, a different grille and redesigned tail lights were the only notable cosmetic changes that year but 1979 brought a redesigned, flat front end and a subtly different taillight treatment featuring a Buick crest and bisecting horizontal silver line. A more extensive redesign occurred for the 1980 model year. 1985-1990 Park Avenue remained the top trim on the Buick Electra, it

5332-488: The Elite and Flagship models from 2007 to 2009. The engine control unit is a Bosch E77 32-bit ECM processor. In 2010, only one engine option was offered, a 3 L SIDI (251 bhp) replacing the old 2.8 V6 and 3.6 V6 due to fuel consumption with the 2.8 litre engine rated at 11.4 litres per 100 kilometres (20.6 MPG US) and the 3.6 litre engine rated 11.6 litres per 100 kilometres (20.3 MPG US) respectively. The 3 litre engine

5456-567: The Essence was a wide, sweeping instrument panel that housed a prototype Delco Navicar navigation system among other innovations. Smooth, graceful body lines forecast the eventual production Park Avenue, introduced in 1990. The Essence was powered by the then-new 165 hp version of Buick's 3800 OHV V6 engine. 3800 V6 Series I L67 SC (91-95) 3800 V6 Series II L67 SC (1996) The 1991 Park Avenue, introduced in July 1990, used GM's C platform and

5580-667: The Estate Wagon. The standard transmission with the base 300 two-barrel V8 was a three-speed column shift manual and a four-speed manual was available as an option with either engine. The new ST300 transmission carried over the variable pitch torque converter from the Dynaflow that had been used since the mid-1950s, while the first year for the ST400 featured a fixed-pitch converter. Inside, only minor trim/upholstery revisions were made. LeSabre and other full-sized Buicks were completely restyled for

5704-410: The LeSabre was downsized along with other GM full-size models, and was available only in pillared coupe, sedan and wagon body styles. In addition to being Buick's entry level vehicle, the LeSabre was consistently Buick's best selling full-size car. Of the four nameplates introduced in 1959 (LeSabre, Invicta, Electra, Electra 225), the LeSabre nameplate lasted the longest. From 1959 to 1961, the LeSabre

5828-463: The Park Avenue Ultra along with a bolder grille that carried a larger monochromatic tri-shield badge in the center. New 17-inch wheels, a revised interior and revised instrument cluster were changed for the 2003 model year on the Ultra. For 2005, the final model year in North America, base Park Avenues received a revised grille, and the previously Ultra-exclusive Ventiports. Also, the rear fascia

5952-468: The Riviera for speedometer and other instruments much like the 1963–64 models along with new heating/air conditioning controls. Drivetrains were unchanged from 1964 with the 210-horsepower two-barrel carbureted 300-cubic-inch V8 the standard powerplant on all models with a standard three-speed manual transmission or optional four-speed manual or two-speed Super Turbine 300 automatic. Available at extra cost with

6076-478: The Super Turbine automatic transmission was discontinued in favor of a standard torque converter. The 1969 LeSabre received new sheetmetal with more squared off styling than the 1965-68 models including a formal roofline on coupes replacing the semi-fastback of previous years. Though the 1969 model was extensively restyled with new sheetmetal, the basic 1965 chassis and inner body structure were retained, along with

6200-434: The automatic transmission under the Turbo Hydra-matic trade name rather than the "Super Turbine" designation used since 1964. At the start of the model year, variable-ratio power steering and power drum brakes were optional equipment. Those items were made standard equipment on all LeSabres (and Wildcats) effective January 1, 1970. Power front disc brakes remained an extra-cost option. For the first time since 1964, Buick offered

6324-477: The automatic transmission was standard on the LeSabre and all other full-sized Buicks but in 1963 was moved back to the option list on LeSabres. For 1964, the Dynaflow-based Turbine Drive was replaced by two new automatic transmissions, the two-speed Super Turbine 300 and the three-speed Super Turbine 400 . A four-speed manual transmission was offered as a LeSabre option from 1963 to 1965 but only

SECTION 50

#1732859211097

6448-483: The base Park Avenue was still priced higher than the Roadmaster Limited (its more luxurious trim). Park Avenue was marketed as the flagship of the Buick line. This generation featured DynaRide, a deflected-disc strut valving system which first appeared as standard on the Electra , LeSabre , Riviera , and Skylark in 1988. Also included was an automatic level control system, where an air compressor pressurized

6572-510: The buyer to a 260-horsepower 340 with four-barrel carburetor and higher 10.25 to 1 compression ratio along with the three-speed Super Turbine 400 automatic found in the larger engine Wildcat, Electra 225 and Riviera. Somewhat more rounded sheet metal and a swoopier fastback roofline for the two-door hardtop highlighted the 1967 LeSabre but chassis and inner body were unchanged along with drivetrains. Both base and Custom-level LeSabres were continued. New options for 1967 included front disc brakes and

6696-451: The compact Chevrolet Vega. It used the heater fan to draw air into the car from the cowl intake, and force it out through vents in the trunk lid or tailgate. In theory, passengers could enjoy fresh air even when the car was moving slowly or stopped, as in heavy traffic. In practice, however, it didn't work. However, within weeks of the 1971 models' debut, Buick and all other GM dealers received multiple complaints from drivers who complained that

6820-560: The doors (and rear quarter panels on coupes and convertibles) for improved side impact protection as was the case with all 1969 GM B- and C-body cars. Powertrains were unchanged from 1968 with the 230-horsepower 350 two-barrel V8 standard and available with a three-speed manual transmission or the two-speed Super Turbine 300 automatic while the LeSabre "400" package once again included a 280-horsepower 350 four-barrel engine and three-speed Super Turbine 400 automatic. Only minor detail changes including grille and taillight revisions were made to

6944-417: The doors and instrument panel; unique aluminum wheels; anti-lock brakes; chromed B-pillar moldings; specific grille and tail lamps; leather-wrapped steering wheel; electronic instrumentation; padded glove-compartment door and unique interior door panel trim. The Park Avenue Ultra carried a higher base price than Cadillac's Sedan de Ville. The Park Avenue Ultra did not gain much popular recognition, however, until

7068-459: The driver and passengers to buckle up. The 1973 Buick LeSabre featured the larger federally mandated "5 mph" front bumper and a new vertical bar grille flowed across the entire lower front end and under the headlights, and turn signal below the bumper. Revised taillights were set in a larger rear bumper. Both the 350 and 455 V8s were revised with EGR valves used on both federal and California-emission equipped cars. The LeSabre Custom convertible

7192-432: The driver and right front passenger to buckle their seat belts in order to start the vehicle. The interlock was met with such a major public outcry that Congress rescinded the interlock regulation in late 1974 after a few early 1975 models were so equipped, permitting owners of all 1974 and the early 1975 models equipped with the interlock system to legally disconnect it. With the Centurion line discontinued after 1973, LeSabre

7316-401: The engine delivered 250 horsepower with a two-barrel carburetor and 10.25 to 1 compression ratio (with Dynaflow transmission; manual transmission cars had a lower 8.5 to 1 compression ratio but horsepower was still rated at 250). Optionally available was a four-barrel version of the 364 rated at 300 horsepower. A three-speed manual transmission was standard on LeSabre but most cars were built with

7440-540: The entry-level status in Buick's hierarchy of products offered. The 1962 Buick LeSabre was only moderately changed from the previous year with bodies taking on a few extra inches to give them a longer look along with new grilles and taillights. Two-door hardtop coupes received a new convertible-like roofline complete with simulated bows. Under the hood, the 364 cubic-inch V8 was replaced by the larger 401 cubic-inch V8 used in Invictas and Electra 225s. LeSabres came standard with

7564-455: The famous "3800" V6 for 1988, with 165 hp (123 kW). This engine increased to 170 hp (127 kW) in 1991 with the addition of Tuned Port Injection. The 1986 model featured the 3.0 liter (181 cubic-inch) V6 as standard. The sixth generation featured Dynaride, four wheel independent suspension, as well as automatic load leveling, which used an air compressor to pressurize the rear Chapman Struts to maintain level ride height — and

SECTION 60

#1732859211097

7688-452: The first-generation Chevrolet Sail which in turn is a version of the 4-door Opel Corsa with a 1.6-liter engine. It is the first export market to receive a vehicle manufactured by SAIC-GM. In 2010, SAIC-GM started exporting the second-generation Chevrolet Sail to Latin American markets, starting with Chile. The third-generation Sail or Aveo, also built by SAIC-GM, was exported to Mexico and

7812-449: The following generation of Park Avenue where the "Ultra" badge offered even more features. The Buick Park Avenue Essence was a concept car designed and engineered by the Buick division of General Motors to showcase advanced technology and styling. First shown in 1989 in a metallic light green color, the Essence made rounds through the auto show circuits later in a metallic white. Inside

7936-424: The front bumper and wide horizontal taillights stretched above the new 5 mph rear bumper. Four-door pillared and hardtop sedans retained the same rooflines as 1973 but the two-door hardtop coupe featured a new roofline with a side rear opera windows (along with a small roll-down rear window). Inside, the instrument panel was substantially revised but retained the wrap-around theme. A new (and seldom ordered) option

8060-1335: The front outboard positions and three-point at the rear outboard positions — for coupe models with the start of 1987 production (September 1986) and for sedans beginning with December 1986 production. Superseding the 1986 Grand National, for 1987 Buick introduced the LeSabre T-Type (1987-1989). The packaged included featuring 15” aluminum wheels, blackwall tires, heavy duty engine and transmission cooling, revised suspension (marketed as Gran Touring ), 2.97 Final Drive Ratio, leather wrapped steering wheel and shift handle, tilt steering column, wipers with delay feature, electronic cruise control, red an amber tail lamps, dual exhaust outlets, black trim (side, belt, roof drip, wheel openings, tail lamps, door handles, lock cylinders and grille), flush hood ornament, black cloth 45/45 Seats, carpet savers, T-Type identification, rear deck spoiler, front air dam, stereo radio (with graphic equalizer, cassette tape and red backlighting),console with red backlighting, black trimmed operation controls (e.g., heating, air conditioning and steering column), analog gauge cluster(with red backlighting, voltmeter, oil pressure, tachometer and coolant temperature gage. Available exterior colors included silver, white, black and red. 1988: For 1988,

8184-441: The front when the faceplate was removed. The seats of a new full-foam design with headrests more squared off than 1969–70. Again, base and Custom model LeSabres were offered in the same sedan and coupe bodystyles while the convertible was a Custom-only offering. The LeSabre 455 model line was dropped for 1971 with the larger engine now being offered as an option on the regular base and Custom-series models. LeSabre Customs equipped with

8308-530: The fuel tank was down to four gallons. This would be the final year for the MaxTrac electronic traction control system as an option. The upscale LeSabre Luxus designation was dropped and replaced by the LeSabre Custom nameplate. 1975 also was the first year of the catalytic converter, and standard high energy ignition which was part of GM's Maximum Mileage System at the time Introduced in September 1974. The 1975 LeSabre

8432-461: The gasoline V8 engine for improved highway fuel economy. LeSabre and other GM cars for 1981 received new 35 PSI radial tires for improved rolling resistance and fuel economy. Few changes were made for the Buick LeSabre for 1982-83 other than revised grilles and trim items. The base LeSabre sedan and coupe models were dropped for 1983 with the LeSabre Custom now the entry-level model and paired with

8556-473: The largest Uzbek automaker formerly known as GM Uzbekistan to produce Chevrolet vehicles such as the Onix . SAIC and GM also operated other joint ventures, including: Buick LeSabre The Buick LeSabre is a full-size car made by the division Buick of General Motors from 1959 until 2005. Prior to 1959, this position had been retained by the full-size Buick Special model (1936–58). The "LeSabre", which

8680-419: The lineup this year, easily identifiable by its full length chrome side molding with a brushed metal insert. The regular LeSabre had a narrow trim piece on the rear third of the body. Under the hood, the 401-cubic-inch V8 was replaced in LeSabre sedans and coupes by a smaller 300-cubic-inch V8 designed for the upsized Special/Skylark intermediates that replaced the aluminum V8 in those vehicles. In standard form,

8804-440: The new LeSabre "400" package was the 250-horsepower 300-cubic-inch V8 with four-barrel carburetion and 10.25 to 1 compression which required premium fuel, compared to the standard two-barrel engine that used regular fuel. The 400 package also included the more desirable Super Turbine "400" three-speed automatic transmission also found in Buick's higher-priced Wildcat, Electra 225 and Riviera models. Buick's engine–transmission practice

8928-488: The new SAE net figures based on an engine as installed in an automobile with accessories and emission controls hooked up, rather than the gross horsepower method of past years based upon a dynamometer rating from an engine not installed in a vehicle. With that, the standard 350 two-barrel V8 was rated at 160 net horsepower compared to 230 gross horsepower in 1971 while the top 455 V8 was rated at 250 net horsepower in 1972 compared to 315 in 1971. Engines were also revised to meet

9052-517: The new cars were slightly downsized in both length and width, and rode on a new X-frame chassis which included a conventional rear axle and driveshaft replacing the decades-old torque tube design. Inside were revised instrument panels retaining the "Mirrormatic" speedometer and new upholstery trims. The Estate station wagons received a " Cordaveen " vinyl interior as standard, with the regular cloth/Cordaveen combination interior available as an option. Engines were unchanged from previous years including

9176-449: The next few years with cubic-inch displacements of 300 (1964–65), 340 (1966–67) and 350 (1968–76). A large-displacement would not reappear in a LeSabre until 1970 when a 455 cubic-inch V8 was introduced as an option and was offered through 1976. Beginning with the downsized 1977 models and continuing through three subsequent generations of front-drive LeSabres introduced in 1986, 1992 and 2000, Buick's 3.8-liter (231 cubic-inch) V6 would become

9300-627: The norm on big cars from GM's medium-priced competitors such as the Chrysler Newport and Mercury Monterey , which offered the TorqueFlite and Cruise-O-Matic transmissions, respectively. New grilles and four-segmented taillights highlighted the facelifted 1966 LeSabre models. Also new was a revised instrument panel with a horizontal sweep speedometer replacing the round pod instruments and new interior door handles. Both base and Custom level series were continued. New standard safety features included

9424-400: The old Dynaflow-based two-speed automatic transmission were two new Super Turbine automatics. The two-speed Super Turbine 300 (shared with the intermediate-sized cars) was available with the standard two-barrel 300 V8 while the three-speed Super Turbine 400 (shared with other big Buicks and Rivieras) was standard with the 300 four-barrel and optional with the standard engine as well as the 401 in

9548-404: The optional 3.8 engine was replaced with the much-modified, balance shaft-equipped LN3 3800 (vin code C, aka pre-series I 3800). 1989: In the engine bay, 1989 models received revised positions for the battery, washer fluid tank, and coolant overflow tank. 1990: 1990 models received a revised tail light design and front bumper/grille, where the center grill element dropped slightly relative to

9672-415: The optional 455 engine got a "455" badge underneath the LeSabre nameplates on the front fenders instead of the "Custom" badge normally used. A revised grille and taillights lenses were among the styling changes for 1972. Out back, a small "BUICK" nameplate was located above the right-side taillight, replacing the larger block letters spelling "B U I C K" across the lower trunk lid between

9796-415: The optional two-speed Dynaflow automatic transmission that was standard equipment on the Invicta and Electra/225. A three-speed "Triple Turbine" Dynaflow variant was also available. Power steering and power brakes were optional and all 1959 Buicks used the unique 12-inch finned aluminum brake drums for improved stopping power that were originally introduced on the 1957 Roadmaster. The 1960 LeSabre received

9920-476: The outboard grill elements. For 1990, the T-Type trim package was dropped. 1991: 1991 models were largely identical to the 1990 model cars aside from a small power increase. Beginning in 1989 and continuing for several years, J.D. Power noted the LeSabre received as one of the highest rated automobiles in customer satisfaction based on factors such as quality and reliability. Production Figures: This LeSabre

10044-493: The outside and lighter than their predecessors, losing 700-800 pounds of weight and 10 to 15 inches (250 to 380 mm) of overall length. The full-sized cars were the beginning of a "corporate-wide" downsizing of vehicles in order to improve fuel economy ratings following the 1973-74 energy crisis that would filter down to intermediates in 1978, personal-luxury cars in 1979 and compacts in 1980 with subsequent downsizings of each line of vehicles scheduled in subsequent years. Although

10168-459: The previous 340. In standard form the 350 V8 delivered 230 horsepower with two-barrel carburetor and 9 to 1 compression ratio and came with a standard three-speed manual transmission or optional two-speed Super Turbine 300 automatic. The "LeSabre 400" option package included a 280-horsepower 350 four-barrel V8 with 10.25 to 1 compression and three-speed Super Turbine 400 automatic transmission. The "Switch-Pitch" torque converter used in conjunction with

10292-463: The rear Chapman struts to maintain an overall level ride height. DynaRide and automatic level control were not available on vehicles equipped with the optional Gran Touring suspension package. Larger 16" aluminum wheels were also included with the package starting in 1992, while the standard model had 15" aluminum wheels. The base-model Park Avenue featured a 3.8 L naturally-aspirated V6 engine and velour interior, upgradeable to leather. Starting in 1992,

10416-521: The rear-drive LeSabre Estate Wagon would soldier on unchanged a few more years). It was also the last LeSabre sedan and coupe to feature body-on-frame construction, V8 power and Buick's traditional all-coil suspension (the 1992–96 Roadmaster sedans would also be similarly built). The top-line LeSabre Limited became the LeSabre Limited Collectors Edition to mark the end of an era for the rear-drive sedan and coupe. Engine offerings included

10540-525: The rear-drive and body-on-frame construction, while the later-generation models introduced in 1986 switched to front-wheel-drive, unit-body construction and transversely mounted engine. Convertibles were offered each year through 1975 while two- and four-door hardtops were dropped after 1976 and only pillared body styles were offered from 1977 to 2005. Station wagons were offered through 1964 and then dropped for several years until being reintroduced in 1970 and continued until 1990 after which year they were moved to

10664-597: The revived Roadmaster series. LeSabres come in two versions: Custom and Limited. LeSabre and all other 1959 Buicks not only got new names, but all-new styling as well, adopting the new GM B- and C-body used on all of the corporation's full-sized cars (the larger C-body used in the Electra as well as the Oldsmobile 98 and all Cadillacs was basically a stretched out B-body rather than a distinct body and chassis for 1959–60). Wheelbases increased by one inch on all models. The new styling included slanted headlights in front along with

10788-407: The roofline of the four-door pillared sedans though vent windows were dropped on all models. Wheelbase remained at 123 inches (3,100 mm). Interiors were mildly revised with minor changes to the instrument panel including the movement of the heating/air conditioning controls to the left of the steering wheel, which was new this year. Headrests, previously optional, were now standard equipment due to

10912-734: The sixth generation LeSabre, using GM's newly developed front wheel drive H platform shared with the Oldsmobile Delta 88 and 1987 Pontiac Bonneville — a platform in most respects identical to the front-drive GM C platform . The LeSabre featured a front-hinged clamshell engine hood, shared with the Buick Electra and flush, aerodynamic styling — but without Buick's hallmark ventiports or sweepspear . Most Buick LeSabre models from this generation were powered by Buick's 3.8 liter (231 cubic-inch) V6 engine. It started out with 150 hp (112 kW). It added balance shafts to become

11036-485: The sole General Motors North American brands to be sold in Europe. An updated Park Avenue was released in October 1996 as a 1997 model, using GM's G platform , which was stronger and more substantial than its predecessor. GM chose to continue to refer to it as the C platform. The new generation was powered by updated Series II variants of the 3800 and as before, only Ultra models were supercharged. The base trim featured

11160-418: The standard 231 V6 (sedans and coupes) or optional Olds 307 V8 (which came as standard in the wagons) and Oldsmobile 350 diesel V8 (available in all models). 1985 307s received roller lifters for reduced friction. Meanwhile, the Estate Wagon continued on largely unchanged as a LeSabre or an Electra through 1990. Production Figures: (For 1986-1990 wagon figures, see Buick Estate ) For 1986, Buick introduced

11284-424: The standard 250-horsepower 364-cubic-inch V8, no-cost regular fuel 235-horsepower 364 or the four-barrel 300-horsepower option of same engine available at extra cost. The two-speed Turbine Drive Dynaflow automatic transmission was standard equipment on LeSabres and all other full-sized Buicks this year, although a manual transmission was also available. The Ventiports returned to the side of the front fender denoting

11408-399: The standard 5.7-litre V8 (350 CID) and a four-barrel carburetor or optional 7.5-litre V8 (455 CID) with a four barrel. The 1975 Buick LeSabre now featured a larger, cross-hatched patterned grille which still ran the entire front of the car, dual headlights were once again set side by side instead of individually. Turn signals were located within the front bumper. A Buick tri-shield hood ornament

11532-525: The standard engine for most LeSabre models and V8 engines were dropped (except in station wagons) after the last of the rear-drive LeSabre sedans and coupes came off the line in 1985. For most years from 1959 to 1971, a three-speed manual transmission was standard equipment on all LeSabres but rarely ordered. Far more popular was the Turbine Drive automatic transmission (previously known as Dynaflow) along with power steering and power brakes. For 1961 and 1962,

11656-485: The start of the 1971 model year. In March, the Turbo Hydramatic transmission became standard equipment, and all Buick LeSabres would remain so equipped in base form until the nameplate's final year in 2005. The new body also featured a double shell roof for improved roll-over protection. Also new for '71 was a flow-through ventilation system utilizing vents mounted in the trunklid shared with other full-sized GM cars and

11780-457: The taillights in 1971. Also new for '72 was a one-year only 2 + 1 ⁄ 2 -mph front bumper. All B, C, and E body (large) GM cars received such a bumper for 1972. Interior trims received only slight revisions from 1971. A revised flow-through ventilation system utilizing vents in the doorjambs replaced the troublesome system used in 1971 with the trunklid vents. Both the 350 and 455 V8s were carried over from 1971 with horsepower ratings switched

11904-670: The top three passenger car manufacturers in mainland China. In June 2004, the Cadillac brand was introduced to China followed by Chevrolet in January 2005. In May 2005 SAIC-GM completed construction of a new assembly plant, the South Plant, at its facility in eastern Shanghai's Pudong district, more than doubling its annual production capacity to 320,000 vehicles. SAIC-GM was the top passenger vehicle producer in China in 2006, with sales of 413,400 vehicles. In 2011, SAIC-GM sold 1,200,355 vehicles in

12028-473: The upscale LeSabre Limited models in both coupe and sedan models. Engine offerings in these two years included the standard Buick 231 V6 or optional 252 V6, or optional Oldsmobile 307 (gasoline) or 350 (Diesel) V8s. A new front clip that largely resembled the Electra and wider and lower taillights were among the appearance changes for the 1984 Buick LeSabre, still offered in Custom and Limited models. The wagon model

12152-415: The vehicles' overall condition. The convertible mechanism used was called the 'scissor top' that folded inward on itself, instead of straight back. This was featured on all GM full-size convertibles from 1971 to 1976. Only minor styling changes highlighted the 1976 Buick LeSabre, which was the final year for the 1971-vintage bodyshell, the unpopular and rarely-ordered driver and passenger-side airbag option,

12276-467: The ventilation system pulled cold air into the car before the heater could warm up and could not be turned off. The ventilation system was extensively modified for 1972. Also new for the 1971 was an optional MaxTrac computerized traction control system. Inside was a new wrap-around cockpit style instrument panel that placed all controls and instruments within easy reach of the driver, along with easier serviceability with instruments and switches accessible from

12400-640: The venture's first vehicle, the Buick Regal , in Shanghai, China in April 1999. This later followed with the Chinese-built Buick GL8 minivan which was a Chinese-exclusive vehicle and was not offered in the United States and Canada. By 2003, China became the second largest single market for General Motors, selling 201,188 vehicles, an 81.6% percent increase over the previous year. In that year SAIC-GM achieved

12524-399: The years 1971 to 1975. The rarest production in that time was the 1971 LeSabre Custom with just over 1,800 units built, and the most produced was the 1973 Centurion with slightly over 5,700 units built. Due to this very low production volume and the end of the full-size convertible era, this may make this series of ragtop LeSabre Custom and Centurion Convertibles quite collectable - depending on

12648-526: Was a low-compression regular-fuel version of the 350 four-barrel rated at 285 horsepower and the high-compression premium fuel 350 four-barrel V8 was reworked with horsepower upped to 315 on a 10.25 to 1 compression ratio. Added to the lineup was a new LeSabre 455 line which shared interior and exterior trimmings with the LeSabre Custom and was powered by Buick's new 455 cubic-inch V8 with four-barrel carburetor, 10.25 to 1 compression and 370 horsepower, which also required premium fuel. Transmission offerings included

12772-893: Was a true hardtop, with small rear quarter windows that rolled down (in addition to a larger third rear side "opera window" that was fixed). Pontiac and Oldsmobile also offered the hardtop coupe in their lower-priced lines. 1976 was the last year for all GM pillarless body styles. To commemorate the Bicentennial of the United States, the standard colors available on all Buicks were Judicial Black, Liberty White, Pewter Gray, Potomac Blue, Continental Blue, Concord Green, Constitution Green, Mount Vernon Cream, Buckskin Tan, Musket Brown, Boston Red and Independence Red, with specially available colors on select models Congressional Cream, Revere Red, Colonial Yellow and Firecracker Orange. The 1977 Buick LeSabre and other GM B-body full-sized cars were considerably smaller on

12896-432: Was an "Air Cushion Restraint System" which included driver- and passenger-side airbags along with a unique four-spoke steering wheel. This option, also available on Electra 225s and Rivieras as well as full-sized Oldsmobiles and Cadillacs, was not very popular and was dropped after the 1976 model year. New integrated seat and shoulder belts were introduced this year along with a federally mandated interlock system that required

13020-556: Was assembled by Shanghai GM from CKD kits shipped from Holden's Elizabeth factory in South Australia. It is offered in five trim levels: 舒适型 (Comfort), 精英型 (Elite), 豪华型 (Luxury - 2.8 only), 旗舰型 (Flagship) and 旗舰版 (Ultimate - 2010 only) The Park Avenue was powered by Australian-built versions of the GM High Feature engine . The standard engines were the 2.8 L LP1 and the 3.6 L LY7 engine available as an option on

13144-559: Was available in Europe from 1991 until 1996 and varied from the North American version by featuring a truncated taillamps with separate amber turn signal indicators and red brake lamps, wider numberplate bezel, fitment of rear red fog lamps, headlamps with different lens pattern, white front side running markers, amber front turn signal indicators, side turn signal repeaters, "flagpole" external rear-view mirrors (mirrors on US version are fixed and do not turn), different door handles, some with

13268-448: Was carried over from 1962 but the three-speed manual transmission returned as standard equipment with the two-speed Turbine Drive automatic reverted to the option list. A new and rarely ordered option this year was a floor-mounted four-speed manual transmission. Minor facelifting with new grille and horizontal taillights replacing the 1963's vertical units highlighted the 1964 LeSabre. A somewhat better equipped "Custom" version also joined

13392-664: Was discontinued after 2005 in the North American market and was replaced in 2006 by the Buick Lucerne . In April 2007, General Motors reintroduced the Park Avenue nameplate in China on a luxury sedan that replaced the Buick Royaum . Like its predecessor, the vehicle is based on the Australian -built Holden Caprice (this time on the contemporary WM/WN generation ), though, unlike the Royaum, it

13516-486: Was dropped for one year in 1984, before returning in 1985. The 252 V6 was dropped from the option list but all other engines returned including the 231 V6 (standard on coupes and sedans), or optional Oldsmobile 307 gasoline V8 (standard on wagons, optional on sedans and coupes) and Oldsmobile 350 Diesel V8 (optional all models). 1985 would be the final year for the rear-drive LeSabre before another downsizing and conversion to front-wheel-drive for 1986 (sedans and coupes only;

13640-503: Was dropped this year leaving the short-lived Centurion as Buick's only ragtop that year as the intermediate Skylark (replaced by the Century for 1973) lost its ragtop completely after the 1972 model year. The engine options continued largely unchanged. The 1974 Buick LeSabre appeared to have a stronger, more modern appearance with a more detailed vertical-barred grille, dual headlights were given individual bezels, turn signals were set within

13764-428: Was introduced in 1991 for the 1992 model year, and was redesigned along the same lines as the previous year's Park Avenue . The two-door coupe was dropped, leaving only a four-door sedan from this point forward. The headlights were streamlined with a separated amber turn signal strip wrapping around the lower front fascia. The rear fascia featured a wider trunk mouth and lower lift over height to ease loading baggage while

13888-641: Was not available on vehicles equipped with Gran Touring Suspension. Each year received slight design changes. 1986: At its inception, the LeSabre featured sealed-beam headlights. Exclusively for 1986, Buick offered the LeSabre Grand National model to homologate the coupe body-style for NASCAR competition. Fewer than 120 were made. The Grand National featured a black exterior with gray interior. 1987: 1987 models received composite headlamps with exchangeable bulbs. In compliance with U.S. passive restraint standards, front seat-belts were door-mounted for

14012-402: Was now Buick's only B-body full-sized car. The base LeSabre was continued, but a new LeSabre Luxus series replaced both the LeSabre Custom and the Centurion. The Luxus convertible also returned the ragtop to the LeSabre line after a one-year absence and was Buick's only ragtop. Engine offerings were revised for 1974. The 350 two-barrel remained standard on all models with optional engines including

14136-469: Was only offered on the base-level LeSabre and not mentioned in initial 1976 Buick literature issued in September 1975 because the V6 engine was a last-minute addition to the line. The 350-cubic-inch V8 was the base engine on the LeSabre Custom and the 455-cubic-inch V8 was optional. Both V8s were optional on the base LeSabre. Unlike the full size Chevrolet and other competing big coupes, Buick's full size LeSabre coupe

14260-445: Was powered by a 364 cubic-inch V8 , which was smaller than the 401 cubic-inch V8 used in the more expensive Invicta and Electra models. The 364, which was previously used in all Buicks in 1957 and 1958, was rated at 250 horsepower (190 kW) in standard form with an "economy" 235 horsepower (175 kW) version offered as a "no cost" option in 1960-61 and an optional power-pack version with four-barrel carburetor and dual exhausts that

14384-407: Was previewed by the 1989 Park Avenue Essence show car. Much of the Park Avenue's styling vocabulary made their way to subsequent Buick models restyled in the 1990s. Projections were for sales of 100,000 annually. The Park Avenue was Buick's largest front-wheel-drive sedan, but the even larger rear-wheel-drive Roadmaster returned to the line for 1991 as a station wagon and 1992 as a sedan. However,

14508-558: Was rated 10.9 litres per 100 kilometres (21.6 MPG US). The third-generation Park Avenue remained a China exclusive and was never offered by Buick in North America. A version of the car did eventually see release in the US market as the stripped down, rebadged Chevrolet Caprice PPV (Police Patrol Vehicle). It was discontinued in China in October 2012. [REDACTED] Media related to Buick Park Avenue at Wikimedia Commons Shanghai GM SAIC General Motors Corporation Limited (commonly known as SAIC-GM ; Chinese : 上汽通用汽车 )

14632-463: Was rated at 300 horsepower (220 kW). For 1962–63, the LeSabre came standard with a two-barrel carbureted version of the 401 V8 rated at 280 horsepower (210 kW), or a no-cost "economy" low-compression version rated at 260 horsepower (190 kW). Starting in 1964, all LeSabre models except the Estate Wagon shared their drivetrains with the midsize Buick models by switching to those models' smaller-displacement V8s at least as standard equipment for

14756-737: Was redesigned along with the rest of the Electra line, moving to the heavily downsized front wheel drive GM C-Body. It featured a Buick 3800 V6 . The coupe version was discontinued in 1987. For 1989, Buick introduced the Park Avenue Ultra trim level. The Ultra was an upgrade to the Electra Park Avenue trim and featured a standard leather interior with dual 20-way power front seats designed and manufactured by Lear Siegler and styled by Giorgetto Giugiaro of Italdesign; lower-body accent exterior paint treatment; distinctive thick-padded french-seamed vinyl top with limousine-style rear-window surround (available only on Ultra); simulated burled elm trim on

14880-557: Was similar to that of GM's Chevrolet Division, which at that time only offered the two-speed Powerglide automatic with most of its engine offerings in full-sized vehicles, requiring buyers who preferred the similar three-speed Turbo-Hydramatic (basically the same transmission under a different name) to order one of the larger V8 engines. Both Pontiac and Oldsmobile offered the Turbo Hydra-Matic on all of their full-sized cars with any engine offering, and three-speed automatics were also

15004-479: Was standard in base and Custom coupes and sedans, the 301 V8 on the new LeSabre Sport Coupe and the 350 V8 on the Estate Wagon. The pillarless hardtop body styles were no longer available. Following a major downsizing and redesign, the 1978 Buick LeSabre received only minor changes including new grillework. Engine offerings were unchanged from 1977 on most models, but the LeSabre Sport Coupe was now powered by

15128-529: Was standard on the Custom Series and optional on the base series. The three-hole 'ventiports' were moved from the hood to the front fenders. Slightly larger but narrower taillamps draped the back of the car with back-up lights positioned in the center broken up by the license plate. Four-door pillared sedans received a new small third windows to emulate the six-window "Colonnade" styling of GM intermediates while four-door hardtop sedans had new opera windows. Inside,

15252-490: Was the first to require use of unleaded gasoline, due to the advent of the catalytic converter. The LeSabre lineup offered a coupe and two sedans while the LeSabre Custom lineup offered the coupe, two sedans, and the only convertible in the Buick lineup. 1975 would be the final year for the LeSabre Custom Convertible with around 5,300 examples rolling off the assembly lines. Engine offerings were reduced to just two:

15376-505: Was updated across the model line with a prominent chrome bar above the license plate holder with an embossed Park Avenue script and amber turn signal flashers. The last 3,000 of 7,000 Park Avenues carried Special Edition badging that featured the namesake script underneath a silhouette of the New York City skyline. 300 of these were painted with a special two-tone black-on-platinum finish. Production ended on June 18, 2004. The Park Avenue

#96903