88-631: Balmain Colliery was a coal mine located in Birchgrove in the inner-west of Sydney , in the state of New South Wales , Australia . It produced coal from 1897 until 1931 and natural gas from 1937 to 1950. At approximately 800 metres (2,600 ft) in depth, it remains the deepest coal mine ever to have been sunk in Australia. The colliery was located on the northern side of the Balmain Peninsula, on
176-553: A Bessemer converter or by other means including smelting reduction processes such as the Corex Process . Smelting has serious effects on the environment , producing wastewater and slag and releasing such toxic metals as copper , silver, iron, cobalt , and selenium into the atmosphere. Smelters also release gaseous sulfur dioxide , contributing to acid rain , which acidifies soil and water. The smelter in Flin Flon, Canada
264-478: A "pit", and above-ground mining structures are referred to as a " pit head ". In Australia , "colliery" generally refers to an underground coal mine. Coal mining has had many developments in recent years, from the early days of men tunneling, digging, and manually extracting the coal on carts to large open-cut and longwall mines. Mining at this scale requires the use of draglines , trucks, conveyors , hydraulic jacks , and shearers. The coal mining industry has
352-697: A 70% increase over the 20 years since 1999. In 2018, the world production of brown coal (lignite) was 803.2 Mt, with Germany the world's largest producer at 166.3 Mt. China is most likely the second largest producer and consumer of lignite globally although specific lignite production data is not made available. Coal production has grown fastest in Asia, while Europe has declined. Since 2011, world coal production has been stable, with decreases in Europe and US offset by increases from China, Indonesia and Australia. The top coal mining nations are: Energy production from coal mining
440-467: A coal seam occurring near the top of a ridge or hill, the entire top is removed in a series of parallel cuts. Overburden is deposited in nearby valleys and hollows. This method usually leaves the ridge and hilltops as flattened plateaus. The process is highly controversial for the drastic changes in topography, the practice of creating head-of-hollow-fills , or filling in valleys with mining debris, and for covering streams and disrupting ecosystems. Spoil
528-405: A fourth of the world's energy. Coal extraction methods vary depending on whether the mine is an underground mine or a surface (also called an open cast) mine. Additionally, coal seam thickness and geology are factors in the selection of a mining method. The most economical method of coal extraction for surface mines is the electric shovel or drag line. The most economical form of underground mining
616-403: A greater proportion of the coal deposit than underground methods, as more of the coal seams in the strata may be exploited. This equipment can include the following: Draglines which operate by removing the overburden, power shovels, large trucks in which transport overburden and coal, bucket wheel excavators, and conveyors. In this mining method, explosives are first used in order to break through
704-424: A hammer to produce wrought iron . Some of the earliest evidence to date for the bloomery smelting of iron is found at Tell Hammeh , Jordan, radiocarbon-dated to c. 930 BC . From the medieval period, an indirect process began to replace the direct reduction in bloomeries. This used a blast furnace to make pig iron , which then had to undergo a further process to make forgeable bar iron. Processes for
792-440: A land use condition is not equal to the original use. Existing land uses (such as livestock grazing, crop and timber production) are temporarily eliminated in mining areas. High-value, intensive-land-use areas like urban and transportation systems are not usually affected by mining operations. If mineral values are sufficient, these improvements may be removed to an adjacent area. Strip mining eliminates existing vegetation, destroys
880-440: A large dining-room table, but with hydraulic jacks for legs. After the large pillars of coal have been mined away, the mobile roof support's legs shorten and it is withdrawn to a safe area. The mine roof typically collapses once the mobile roof supports leave an area. There are six principal methods of underground mining: Coal is mined commercially in over 50 countries. 7,921 million metric tons (Mt) of coal were produced in 2019,
968-559: A long history of significant negative environmental impacts on local ecosystems, health impacts on local communities and workers, and contributes heavily to the global environmental crises, such as poor air quality and climate change . For these reasons, coal has been one of the first fossil fuels to be phased out of various parts of the global energy economy . The major coal producing countries, though, such as China , Indonesia, India and Australia , have not reached peak production, with production increases replacing falls in Europe and
SECTION 10
#17328451623591056-686: A low concentration of sulfur dioxide that was difficult to capture; a new generation of copper smelting technologies has supplanted them. More recent furnaces exploit bath smelting, top-jetting lance smelting, flash smelting , and blast furnaces. Some examples of bath smelters include the Noranda furnace, the Isasmelt furnace, the Teniente reactor, the Vunyukov smelter, and the SKS technology. Top-jetting lance smelters include
1144-447: A method that currently accounts for about 60 percent of world coal production. In deep mining, the room and pillar or bord and pillar method progresses along the seam, while pillars and timber are left standing to support the mine roof. Once room and pillar mines have been developed to a stopping point limited by geology, ventilation, or economics, a supplementary version of room and pillar mining, termed second mining or retreat mining ,
1232-432: A new coal mine. Smelting Smelting is a process of applying heat and a chemical reducing agent to an ore to extract a desired base metal product. It is a form of extractive metallurgy that is used to obtain many metals such as iron , copper , silver , tin , lead and zinc . Smelting uses heat and a chemical reducing agent to decompose the ore, driving off other elements as gases or slag and leaving
1320-481: A range of more complex organic compounds known collectively as polycyclic aromatic hydrocarbons (PAH). Treatment technologies include recycling of wastewater; settling basins , clarifiers and filtration systems for solids removal; oil skimmers and filtration; chemical precipitation and filtration for dissolved metals; carbon adsorption and biological oxidation for organic pollutants; and evaporation. Pollutants generated by other types of smelters varies with
1408-574: A result of occupational exposures is coined occupational hearing loss . To protect miners' hearing, the US Mine Safety and Health Administration 's (MSHA) guidelines for noise place a Permissible Exposure Limit (PEL) for noise at 90 dBA time-weighted over 8 hours. A lower cutoff, 85 dBA, is set for a worker to fall into the MSHA Action Level which dictates that workers be placed into hearing conservation programs. Noise exposures vary depending on
1496-434: A secondary service after the reduction step is complete; they provide a molten cover on the purified metal, preventing contact with oxygen while still hot enough to readily oxidize. This prevents impurities from forming in the metal. The ores of base metals are often sulfides. In recent centuries, reverberatory furnaces have been used to keep the charge being smelted separately from the fuel. Traditionally, they were used for
1584-575: Is accomplished by drilling holes into the overburden, filling the holes with explosives, and detonating the explosive. The overburden is then removed, using large earth-moving equipment, such as draglines , shovel and trucks, excavator and trucks, or bucket-wheels and conveyors. This overburden is put into the previously mined (and now empty) strip. When all the overburden is removed, the underlying coal seam will be exposed (a 'block' of coal). This block of coal may be drilled and blasted (if hard) or otherwise loaded onto trucks or conveyors for transport to
1672-427: Is commonly started. Miners remove the coal in the pillars, thereby recovering as much coal from the coal seam as possible. A work area involved in pillar extraction is called a pillar section. Modern pillar sections use remote-controlled equipment, including large hydraulic mobile roof-supports, which can prevent cave-ins until the miners and their equipment have left a work area. The mobile roof supports are similar to
1760-418: Is dedicated to mining activities until it can be reshaped and reclaimed. If mining is allowed, resident human populations must be resettled off the mine site; economic activities, such as agriculture or hunting and gathering food and medicinal plants are interrupted. What becomes of the land surface after mining is determined by the manner in which the mining is conducted. Usually reclamation of disturbed lands to
1848-537: Is easily produced during the heating process, and as a gas comes into intimate contact with the ore. In the Old World , humans learned to smelt metals in prehistoric times, more than 8000 years ago. The discovery and use of the "useful" metals – copper and bronze at first, then iron a few millennia later – had an enormous impact on human society. The impact was so pervasive that scholars traditionally divide ancient history into Stone Age , Bronze Age , and Iron Age . In
SECTION 20
#17328451623591936-516: Is highly concentrated in certain jurisdictions, which also concentrates much of the social and economic impacts of the industry to these regions. The industry directly employs over seven million workers worldwide, which, in turn, creates millions of indirect jobs. In several parts of the world, producers have reached peak coal as some economies shift away from fossil fuels to address climate change. A 2020 study found that renewables jobs could feasibly be created in these geographies to replace many of
2024-427: Is mostly used to generate electricity, and 75% of annual coal production is exported, mostly to eastern Asia. In 2007, 428 million tonnes of coal was mined in Australia. In 2007, coal provided about 85% of Australia's electricity production. In the fiscal year 2008/09, 487 million tonnes of coal was mined, and 261 million tonnes was exported. In the fiscal year 2013/14, 430.9 million tonnes of coal
2112-408: Is occasionally found in commercially significant quantities. These minerals are primarily carbonates , sulfides , or oxides of the metal, mixed with other components such as silica and alumina . Roasting the carbonate and sulfide minerals in the air converts them to oxides. The oxides, in turn, are smelted into the metal. Carbon monoxide was (and is) the reducing agent of choice for smelting. It
2200-582: Is only marginally harder, and had even less impact by itself. The earliest evidence for iron-making is a small number of iron fragments with the appropriate amounts of carbon admixture found in the Proto-Hittite layers at Kaman-Kalehöyük and dated to 2200–2000 BC. Souckova-Siegolová (2001) shows that iron implements were made in Central Anatolia in very limited quantities around 1800 BC and were in general use by elites, though not by commoners, during
2288-417: Is partially economically recoverable. Coal refuse is distinct from the byproducts of burning coal, such as fly ash . Piles of coal refuse can have significant negative environmental consequences, including the leaching of iron, manganese, and aluminum residues into waterways and acid mine drainage . The runoff can create both surface and groundwater contamination. The piles also create a fire hazard, with
2376-593: Is placed at the head of a narrow, steep-sided valley or hollow. In preparation for filling this area, vegetation and soil are removed and a rock drain constructed down the middle of the area to be filled, where a natural drainage course previously existed. When the fill is completed, this underdrain will form a continuous water runoff system from the upper end of the valley to the lower end of the fill. Typical head-of-hollow fills are graded and terraced to create permanently stable slopes. Most coal seams are too deep underground for opencast mining and require underground mining,
2464-436: Is referred to as 'overburden' and is removed in long strips. The overburden from the first strip is deposited in an area outside the planned mining area and referred to as out-of-pit dumping. Overburden from subsequent strips is deposited in the void left from mining the coal and overburden from the previous strip. This is referred to as in-pit dumping. It is often necessary to fragment the overburden by use of explosives. This
2552-515: Is removed and overburden dumped to the side. Dust, vibration, and diesel exhaust odors are created (affecting sight, sound, and smell). Residents of local communities often find such impacts disturbing or unpleasant. In case of mountaintop removal , tops are removed from mountains or hills to expose thick coal seams underneath. The soil and rock removed is deposited in nearby valleys, hollows and depressions, resulting in blocked (and contaminated) waterways. Removal of soil and rock overburden covering
2640-701: Is still common, with 4,000 new cases of black lung every year in the US (4 percent of workers annually) and 10,000 new cases every year in China (0.2 percent of workers). The use of water sprays in mining equipment reduces the risk to miners' lungs. Build-ups of a hazardous gas are known as damps, possibly from the German word Dampf which means steam or vapor: Noise is also a contributing factor to potential adverse effects on coal miners' health. Exposure to excessive noise can lead to noise-induced hearing loss . Hearing loss developed as
2728-464: Is the long wall, which involves using two spinning drums with carbide bits that runs along sections of the coal seam. Many coals extracted from both surface and underground mines require washing in a coal preparation plant . Technical and economic feasibility are evaluated based on the following: regional geological conditions; overburden characteristics; coal seam continuity, thickness, structure, quality, and depth; strength of materials above and below
Balmain Colliery - Misplaced Pages Continue
2816-463: Is the process of extracting coal from the ground or from a mine. Coal is valued for its energy content and since the 1880s has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. In the United Kingdom and South Africa , a coal mine and its structures are a colliery , a coal mine is called
2904-562: Is unknown. The first such bronzes may have been a lucky accident from tin-contaminated copper ores. However, by 2000 BC, people were mining tin on purpose to produce bronze—which is remarkable as tin is a semi-rare metal, and even a rich cassiterite ore only has 5% tin. The discovery of copper and bronze manufacture had a significant impact on the history of the Old World . Metals were hard enough to make weapons that were heavier, stronger, and more resistant to impact damage than wood, bone, or stone equivalents. For several millennia, bronze
2992-435: Is used for both thermal and metallurgical coals . In New South Wales open casting for steam coal and anthracite is practiced. Surface mining accounts for around 80 percent of production in Australia, while in the US it is used for about 67 percent of production. Globally, about 40 percent of coal production involves surface mining. Strip mining exposes coal by removing earth above each coal seam. This earth to be removed
3080-508: The Americas , pre- Inca civilizations of the central Andes in Peru had mastered the smelting of copper and silver at least six centuries before the first Europeans arrived in the 16th century, while never mastering the smelting of metals such as iron for use with weapon craft. Copper was the first metal to be smelted. How the discovery came about is debated. Campfires are about 200 °C short of
3168-482: The Industrial Revolution , and coal provided the main source of primary energy for industry and transportation in industrial areas from the 18th century to the 1950s. Coal remains an important energy source. Coal is also mined today on a large scale by open pit methods wherever the coal strata strike the surface or are relatively shallow. Britain developed the main techniques of underground coal mining from
3256-593: The New Hittite Empire (~1400–1200 BC). Archaeologists have found indications of iron working in Ancient Egypt , somewhere between the Third Intermediate Period and 23rd Dynasty (ca. 1100–750 BC). Significantly though, they have found no evidence of iron ore smelting in any (pre-modern) period. In addition, very early instances of carbon steel were in production around 2000 years ago (around
3344-536: The Mitsubishi smelting reactor. Flash smelters account for over 50% of the world's copper smelters. There are many more varieties of smelting processes, including the Kivset, Ausmelt, Tamano, EAF, and BF. Of the seven metals known in antiquity , only gold regularly occurs in nature as a native metal . The others – copper , lead , silver , tin , iron , and mercury – occur primarily as minerals, although native copper
3432-787: The U.S., Examples include the Sago Mine disaster of 2006, and the 2007 mine accident in Utah 's Crandall Canyon Mine , where nine miners were killed and six entombed. In the decade 2005–2014, US coal mining fatalities averaged 28 per year. The most fatalities during the 2005–2014 decade were 48 in 2010, the year of the Upper Big Branch Mine disaster in West Virginia, which killed 29 miners. Chronic lung diseases, such as pneumoconiosis (black lung) were once common in miners, leading to reduced life expectancy . In some mining countries black lung
3520-608: The US Department of Labor's Mine Safety and Health Administration (MSHA) show that between 1990 and 2004, the industry cut the rate of injuries by more than half and fatalities by two-thirds. But according to the Bureau of Labor Statistics , even in 2006, mining remained the second most dangerous occupation in America, when measured by fatality rate . These numbers, however, include all mining activities, and oil and gas mining contribute to
3608-660: The United States and proposed mines under development. The coal mining industry employs almost 2.7 million workers. The History of coal mining goes back thousands of years, with early mines documented in ancient China, the Roman Empire and other early historical economies. It became important in the Industrial Revolution of the 19th and 20th centuries, when it was primarily used to power steam engines, heat buildings and generate electricity. Coal mining continues as an important economic activity today, but has begun to decline due to
Balmain Colliery - Misplaced Pages Continue
3696-418: The ancient world. It is too soft to use for structural elements or weapons, though its high density relative to other metals makes it ideal for sling projectiles. However, since it was easy to cast and shape, workers in the classical world of Ancient Greece and Ancient Rome used it extensively to pipe and store water. They also used it as a mortar in stone buildings. Tin was much less common than lead,
3784-461: The base metal ore. For example, aluminum smelters typically generate fluoride , benzo(a)pyrene , antimony and nickel, as well as aluminum. Copper smelters typically discharge cadmium, lead, zinc , arsenic and nickel, in addition to copper. Lead smelters may discharge antimony , asbestos, cadmium, copper and zinc, in addition to lead. Labourers working in the smelting industry have reported respiratory illnesses inhibiting their ability to perform
3872-581: The coal mining jobs as part of a just transition ; however, renewable energy was not suitable in some of the geographies with high concentrations of miners, such as in China, which is far and away the leading coal-mining nation. Coal refuse (also described as coal waste, rock, slag, coal tailings, waste material, rock bank, culm, boney, or gob ) is the material left over from coal mining, usually as tailings piles or spoil tips . For every tonne of hard coal generated by mining, 400 kg (880 lb) of waste material remains, which includes some lost coal that
3960-497: The coal preparation (or wash) plant. Once this strip is empty of coal, the process is repeated with a new strip being created next to it. This method is most suitable for areas with flat terrain. Equipment to be used depends on geological conditions. For example, to remove overburden that is loose or unconsolidated, a bucket wheel excavator might be the most productive. The life of some area mines may be more than 50 years. The contour mining method consists of removing overburden from
4048-857: The coal resource may cause burial and loss of topsoil, exposes parent material, and creates large infertile wastelands. Soil disturbance and associated compaction result in conditions conducive to erosion. Soil removal from the area to be surface-mined alters or destroys many natural soil characteristics, and reduces its biodiversity and productivity for agriculture. Soil structure may be disturbed by pulverization or aggregate breakdown. Top 10 hard and brown coal producers in 2012 were (in million metric tons): China 3,621, United States 922, India 629, Australia 432, Indonesia 410, Russia 351, South Africa 261, Germany 196, Poland 144, and Kazakhstan 122. Coal has been mined in every state of Australia, but mainly in Queensland, New South Wales and Victoria. It
4136-476: The corner of Birchgrove Road and Water Street, next to Birchgrove Public School. The presence of coal was confirmed in 1891 with bores at Birchgrove and Cremorne Point. Permission to mine from the Department of Mines was granted in 1894 with another parcel of land between Rose Bay and Vaucluse also applied for in 1895. Sydney Harbour Collieries (Limited) started the mine, however the company was wound up in 1896; and
4224-429: The developed world. Modern coal mining in the US has an average 23 deaths per year due to mine accidents (2001–2020). However, in lesser developed countries and some developing countries, many miners continue to die annually, either through direct accidents in coal mines or through adverse health consequences from working under poor conditions. China , in particular, has the highest number of coal mining related deaths in
4312-408: The discovery happened several millennia before the invention of writing, there is no written record of how it was made. However, tin and lead can be smelted by placing the ores in a wood fire, leaving the possibility that the discovery may have occurred by accident. Recent scholarship however has called this find into question. Lead is a common metal, but its discovery had relatively little impact in
4400-455: The disruptive activities of blasting, ripping, and excavating coal. Stripping of overburden eliminates and destroys archeological and historic features, unless they are removed beforehand. The removal of vegetative cover and activities associated with the construction of haul roads, stockpiling of topsoil, displacement of overburden and hauling of soil and coal increase the quantity of dust around mining operations. Dust degrades air quality in
4488-508: The establishment of trade networks that spanned large areas of Europe and Asia and had a major effect on the distribution of wealth among individuals and nations. The earliest known cast lead beads were thought to be in the Çatalhöyük site in Anatolia ( Turkey ), and dated from about 6500 BC. However, recent research has discovered that this was not lead, but rather cerussite and galena, minerals rich in, but distinct from, lead. Since
SECTION 50
#17328451623594576-571: The fatalities occurring in the first half of the 20th century. 3,242 died in 1907, the worst year ever; in 2020 there were five. Open cut hazards are principally mine wall failures and vehicle collisions; underground mining hazards include suffocation, gas poisoning, roof collapse, rock burst , outbursts , and gas explosions. Firedamp explosions can trigger the far more dangerous coal dust explosions, which can engulf an entire mine. Most of these risks are greatly reduced in modern mines, and multiple fatality incidents are now rare in most parts of
4664-513: The final oxygen atoms from the raw metal. The carbon source acts as a chemical reactant to remove oxygen from the ore, yielding the purified metal element as a product. The carbon source is oxidized in two stages. First, carbon (C) combusts with oxygen (O 2 ) in the air to produce carbon monoxide (CO). Second, the carbon monoxide reacts with the ore (e.g. Fe 2 O 3 ) and removes one of its oxygen atoms, releasing carbon dioxide (CO 2 ). After successive interactions with carbon monoxide, all of
4752-429: The first step of smelting: forming two liquids, one an oxide slag containing most of the impurities, and the other a sulfide matte containing the valuable metal sulfide and some impurities. Such "reverb" furnaces are today about 40 meters long, 3 meters high, and 10 meters wide. Fuel is burned at one end to melt the dry sulfide concentrates (usually after partial roasting) which are fed through openings in
4840-401: The first-century .) in northwest Tanzania , based on complex preheating principles. These discoveries are significant for the history of metallurgy. Most early processes in Europe and Africa involved smelting iron ore in a bloomery , where the temperature is kept low enough so that the iron does not melt. This produces a spongy mass of iron called a bloom, which then must be consolidated with
4928-457: The genetic soil profile, displaces or destroys wildlife and habitat, alters current land uses, and to some extent permanently changes the general topography of the area mined. Adverse impacts on geological features of human interest may occur in a coal strip mine. Geomorphic and geophysical features and outstanding scenic resources may be sacrificed by indiscriminate mining. Paleontological, cultural, and other historic values may be endangered due to
5016-450: The immediate area, has an adverse impact on vegetative life, and constitutes health and safety hazards for mine workers and nearby residents. Surface mining disrupts virtually all aesthetic elements of the landscape. Alteration of land forms often imposes unfamiliar and discontinuous configurations. New linear patterns appear as material is extracted and waste piles are developed. Different colors and textures are exposed as vegetative cover
5104-460: The late 18th century onward, with further progress being driven by 19th-century and early 20th-century progress. However, oil and gas were increasingly used as alternatives from the 1860s onward. By the late 20th century, coal was, for the most part, replaced in domestic as well as industrial and transportation usage by oil , natural gas or electricity produced from oil, gas, nuclear power or renewable energy sources. By 2010, coal produced over
5192-404: The majority of fatalities. Coal mining resulted in 47 fatalities that year. One study, though, has suggested that hazards of modern mining are now more accretive with workers facing long-term health impacts, such as sleep deprivation, that build up over time. Strip mining severely alters the landscape, which reduces the value of the natural environment in the surrounding land. The land surface
5280-492: The metal behind. The reducing agent is commonly a fossil-fuel source of carbon , such as carbon monoxide from incomplete combustion of coke —or, in earlier times, of charcoal . The oxygen in the ore binds to carbon at high temperatures, as the chemical potential energy of the bonds in carbon dioxide (CO 2 ) is lower than that of the bonds in the ore. Sulfide ores such as those commonly used to obtain copper, zinc or lead, are roasted before smelting in order to convert
5368-411: The metal out of its ore. Most ores are the chemical compound of the metal and other elements, such as oxygen (as an oxide ), sulfur (as a sulfide ), or carbon and oxygen together (as a carbonate ). To extract the metal, workers must make these compounds undergo a chemical reaction . Smelting, therefore, consists of using suitable reducing substances that combine with those oxidizing elements to free
SECTION 60
#17328451623595456-490: The metal. In the case of sulfides and carbonates, a process called " roasting " removes the unwanted carbon or sulfur, leaving an oxide, which can be directly reduced. Roasting is usually carried out in an oxidizing environment. A few practical examples: Reduction is the final, high-temperature step in smelting, in which the oxide becomes the elemental metal. A reducing environment (often provided by carbon monoxide, made by incomplete combustion in an air-starved furnace) pulls
5544-461: The method of extraction. For example, a study has found that among surface coal mine operations, dragline equipment produced the loudest sound at a range of 88–112 dBA. Within longwall sections, stageloaders used to transport coal from the mining face and shearers used for extraction represent some of the highest noise exposures. Auxiliary fans (up to 120 dBA), continuous mining machines (up to 109 dBA), and roof bolters (up to 103 dBA) represent some of
5632-528: The mine was bought by the Harbour Collieries Co. Two shafts, named Birthday and Jubilee, were sunk between 1897 and 1902. The mine produced coal from 1897 to 1915 and from 1924 to 1931, and methane ( natural gas ) from 1937 to 1950. The site is now occupied by the Hopetoun Quays residential complex. Three fatal accidents occurred at the mine claiming ten lives: Coal mine Coal mining
5720-465: The mining workforce. in 2015 US coal mines had 65,971 employees, the lowest figure since EIA began collecting data in 1978. However, a 2016 study reported that a relatively minor investment would allow most coal workers to retrain for the solar energy industry. Coal mining has been a very dangerous activity and the list of historical coal mining disasters is long. In the U.S., 104,895 coal miners were killed in mine accidents since 1900, 90 percent of
5808-469: The noisiest equipment within continuous mining sections. Exposures to noise exceeding 90 dBA can lead to adverse effects on workers' hearing. The use of administrative controls and engineering controls can be used to reduce noise exposures. Improvements in mining methods (e.g. longwall mining), hazardous gas monitoring (such as safety-lamps or more modern electronic gas monitors), gas drainage, electrical equipment , and ventilation have reduced many of
5896-716: The oldest evidence, now appears to be hammered, native copper. Combining copper with tin and/or arsenic in the right proportions produces bronze , an alloy that is significantly harder than copper. The first copper/arsenic bronzes date from 4200 BC from Asia Minor . The Inca bronze alloys were also of this type. Arsenic is often an impurity in copper ores, so the discovery could have been made by accident. Eventually, arsenic-bearing minerals were intentionally added during smelting. Copper–tin bronzes, harder and more durable, were developed around 3500 BC, also in Asia Minor. How smiths learned to produce copper/tin bronzes
5984-585: The open pit methods, due to thickness of the seam 20–25 metres (60–90 feet). Coals occurring below 90 m (300 ft) are usually deep mined. However, there are open pit mining operations working on coal seams up to 300–460 metres (1,000–1,500 feet) below ground level, for instance Tagebau Hambach in Germany. When coal seams are near the surface, it may be economical to extract the coal using open-cut , also referred to as open-cast, open-pit, mountaintop removal or strip, mining methods. Opencast coal mining recovers
6072-421: The operation reaches a predetermined stripping ratio (tons of overburden/tons of coal), it is not profitable to continue. Depending on the equipment available, it may not be technically feasible to exceed a certain height of highwall. At this point, it is possible to produce more coal with the augering method in which spiral drills bore tunnels into a highwall laterally from the bench to extract coal without removing
6160-464: The ore during smelting to catalyze the desired reactions and to chemically bind to unwanted impurities or reaction products. Calcium carbonate or calcium oxide in the form of lime are often used for this purpose, since they react with sulfur, phosphorus, and silicon impurities to allow them to be readily separated and discarded, in the form of slag. Fluxes may also serve to control the viscosity and neutralize unwanted acids. Flux and slag can provide
6248-408: The overburden. Mountaintop coal mining is a surface mining practice involving removal of mountaintops to expose coal seams, and disposing of associated mining overburden in adjacent "valley fills." Valley fills occur in steep terrain where there are limited disposal alternatives. Mountaintop removal mining combines area and contour strip mining methods. In areas with rolling or steep terrain with
6336-431: The oxygen in the ore will be removed, leaving the raw metal element (e.g. Fe). As most ores are impure, it is often necessary to use flux , such as limestone (or dolomite ), to remove the accompanying rock gangue as slag. This calcination reaction emits carbon dioxide. The required temperature varies both in absolute terms and in terms of the melting point of the base metal. Examples: Fluxes are materials added to
6424-425: The potential to spontaneously ignite. Because most coal refuse harbors toxic components, it is not easily reclaimed by replanting with plants like beach grasses. The use of sophisticated sensing equipment to monitor air quality is common and has replaced the use of small animals such as canaries, often referred to as " miner's canaries ". In the United States, the increase in technology has significantly decreased
6512-399: The risks of rock falls, explosions, and unhealthy air quality. Gases released during the mining process can be recovered to generate electricity and improve worker safety with gas engines . Another innovation in recent years is the use of closed circuit escape respirators , respirators that contain oxygen for situations where mine ventilation is compromised. Statistical analyses performed by
6600-401: The roof of the furnace. The slag floats over the heavier matte and is removed and discarded or recycled. The sulfide matte is then sent to the converter . The precise details of the process vary from one furnace to another depending on the mineralogy of the ore body. While reverberatory furnaces produced slags containing very little copper, they were relatively energy inefficient and off-gassed
6688-418: The seam for roof and floor conditions; topography, especially altitude and slope; climate; land ownership as it affects the availability of land for mining and access; surface drainage patterns; groundwater conditions; availability of labor and materials; coal purchaser requirements in terms of tonnage, quality, and destination; and capital investment requirements. Surface mining and deep underground mining are
6776-565: The seam in a pattern following the contours along a ridge or around the hillside. This method is most commonly used in areas with rolling to steep terrain. It was once common to deposit the spoil on the downslope side of the bench thus created, but this method of spoil disposal consumed much additional land and created severe landslide and erosion problems. To alleviate these problems, a variety of methods were devised to use freshly cut overburden to refill mined-out areas. These haul-back or lateral movement methods generally consist of an initial cut with
6864-502: The second stage include fining in a finery forge . In the 13th century during the High Middle Ages the blast furnace was introduced by China who had been using it since as early as 200 b.c during the Qin dynasty . [1] Puddling was also introduced in the Industrial Revolution . Both processes are now obsolete, and wrought iron is now rarely made. Instead, mild steel is produced from
6952-432: The spoil deposited downslope or at some other site and spoil from the second cut refilling the first. A ridge of undisturbed natural material 15 to 20 ft (5 to 6 m) wide is often intentionally left at the outer edge of the mined area. This barrier adds stability to the reclaimed slope by preventing spoil from slumping or sliding downhill. The limitations of contour strip mining are both economic and technical. When
7040-556: The strong contribution coal plays in global warming and environmental issues, which result in decreasing demand and in some geographies, peak coal . Compared to wood fuels , coal yields a higher amount of energy per unit mass, specific energy or massic energy, and can often be obtained in areas where wood is not readily available. Though it was used historically as a domestic fuel, coal is now used mostly in industry, especially in smelting and alloy production, as well as electricity generation . Large-scale coal mining developed during
7128-455: The sulfides to oxides, which are more readily reduced to the metal. Roasting heats the ore in the presence of oxygen from air, oxidizing the ore and liberating the sulfur as sulfur dioxide gas. Smelting most prominently takes place in a blast furnace to produce pig iron , which is converted into steel . Plants for the electrolytic reduction of aluminium are referred to as aluminium smelters . Smelting involves more than just melting
7216-476: The surface or overburden, of the mining area. The overburden is then removed by draglines or by shovel and truck. Once the coal seam is exposed, it is drilled, fractured and thoroughly mined in strips. The coal is then loaded onto large trucks or conveyors for transport to either the coal preparation plant or directly to where it will be used. Most open cast mines in the United States extract bituminous coal . In Canada, Australia, and South Africa, open cast mining
7304-643: The temperature needed, so some propose that the first smelting of copper may have occurred in pottery kilns . (The development of copper smelting in the Andes, which is believed to have occurred independently of the Old World , may have occurred in the same way. ) The earliest current evidence of copper smelting, dating from between 5500 BC and 5000 BC, has been found in Pločnik and Belovode, Serbia. A mace head found in Turkey and dated to 5000 BC, once thought to be
7392-524: The two basic methods of mining. The choice of mining method depends primarily on depth, density, overburden, and thickness of the coal seam; seams relatively close to the surface, at depths less than approximately 55 m (180 ft), are usually surface mined. Coal that occurs at depths of 55 to 90 m (180 to 300 ft) are usually deep mined, but in some cases surface mining techniques can be used. For example, some western U.S. coal that occur at depths in excess of 60 m (200 ft) are mined by
7480-441: The world, with official statistics claiming that 6,027 deaths occurred in 2004. To compare, 28 deaths were reported in the U.S. in the same year. Coal production in China is twice that in the US, while the number of coal miners is around 50 times that of the US, making deaths in coal mines in China 4 times as common per worker (108 times as common per unit output) as in the US. Mine disasters have still occurred in recent years in
7568-531: Was mined, and 375.1 million tonnes was exported. In 2013/14, coal provided about 69% of Australia's electricity production. In 2013, Australia was the world's fifth-largest coal producer, after China, the United States, India, and Indonesia. However, in terms of proportion of production exported, Australia is the world's second largest coal exporter, as it exports roughly 73% of its coal production. Indonesia exports about 87% of its coal production. A court in Australia has cited climate change in ruling against
7656-1034: Was one of the largest point sources of mercury in North America in the 20th century. Even after smelter releases were drastically reduced, landscape re-emission continued to be a major regional source of mercury. Lakes will likely receive mercury contamination from the smelter for decades, from both re-emissions returning as rainwater and leaching of metals from the soil. Air pollutants generated by aluminium smelters include carbonyl sulfide , hydrogen fluoride , polycyclic compounds , lead, nickel , manganese , polychlorinated biphenyls , and mercury . Copper smelter emissions include arsenic, beryllium , cadmium , chromium , lead, manganese, and nickel. Lead smelters typically emit arsenic, antimony , cadmium and various lead compounds. Wastewater pollutants discharged by iron and steel mills includes gasification products such as benzene , naphthalene , anthracene , cyanide , ammonia , phenols and cresols , together with
7744-526: Was the material of choice for weapons such as swords , daggers , battle axes , and spear and arrow points, as well as protective gear such as shields , helmets , greaves (metal shin guards), and other body armor . Bronze also supplanted stone, wood, and organic materials in tools and household utensils—such as chisels , saws , adzes , nails , blade shears , knives , sewing needles and pins , jugs , cooking pots and cauldrons , mirrors , and horse harnesses . Tin and copper also contributed to
#358641