Misplaced Pages

Abbott 33

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship . Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture.

#974025

36-566: The Abbott 33 is a Canadian sailboat , that was designed by Jan Torben Larsen and Abbott Boats and first built in 1981. The Abbott 33 is a development of Larsen's SCAN-KAP 99 design, which was built in Denmark . The boat was built by Abbott Boats in Sarnia, Ontario , Canada . The company built 40 examples starting in 1981, but it is now out of production. The Abbott 33 is a small recreational keelboat , built predominantly of fibreglass . It has

72-440: A fractional sloop rig, an internally-mounted spade-type rudder and a fixed fin keel . It displaces 6,057 lb (2,747 kg) and carries 3,304 lb (1,499 kg) of ballast. The boat has a draft of 5.42 ft (1.65 m) with the standard keel. The boat is fitted with a fresh water tank with a capacity of 15 U.S. gallons (57 L; 12 imp gal). The boat has a PHRF racing average handicap of 126 with

108-478: A crane and are typically stepped on the keel through any cabin or other superstructure. Many sailboats have an alternate means of propulsion, in case the wind dies or where close maneuvering under sail is impractical. The smallest boats may use a paddle ; bigger ones may have oars ; still others may employ an outboard motor , mounted on the transom; still others may have an inboard engine . Bermuda rig A Bermuda rig , Bermudian rig , or Marconi rig

144-467: A high of 132 and low of 120. It has a hull speed of 6.95 kn (12.87 km/h). Similar sailboats Sailboat Although sailboat terminology has varied across history, many terms have specific meanings in the context of modern yachting . A great number of sailboat-types may be distinguished by size, hull configuration, keel type, purpose, number and configuration of masts , and sail plan . Popular monohull designs include: The cutter

180-407: A jib. Most modern designs have only one sail, the mainsail; however, the traditional catboat could carry multiple sails from the gaff rig. Catboat is a charming and distinctive sailboat featuring a single mast with a single large sail, known as a gaff-rigged sail, and a broad beam that ensures stability. This type of vessel, named after the "cat" tackle used in sailing, has a rich history dating back to

216-465: A long bowsprit , and may or may not have a boom. In some configurations such as the Bermuda Fitted Dinghy vast areas of sail are achieved with this rig. Elsewhere, however, the design has omitted the bowsprit, and has otherwise become less extreme. A Bermuda rigged sloop with a single jib is known as a Bermuda sloop , a Marconi sloop , or a Marconi rig . A Bermuda sloop may also be

252-431: A lot of weight in two "wings" which run sideways from the main part of the keel. Even more recent is the concept of canting keels , designed to move the weight at the bottom of a sailboat to the upwind side, allowing the boat to carry more sails. A twin keel has the benefit of a shallower draft and can allow the boat to stand on dry land. Multihulls, on the other hand, have minimal need for such ballast, as they depend on

288-473: A more specific type of vessel such as a small sailing ships traditional in Bermuda which may or may not be Bermuda rigged . The foot of a Bermuda sail may be attached to the boom along its length, or in some modern rigs the sail is attached to the boom only at its ends. This modern variation of a Bermuda mainsail is known as a loose-footed main . In some early Bermudian vessels, the mainsails were attached only to

324-411: A reduced draft, with a much reduced underwater profile. This, in turn, results directly in reduced wetted surface area and drag. Without a ballast keel, multihulls can go in shallow waters where monohulls can not. There are trade-offs, however, in multihull design. A well designed ballasted boat can recover from a capsize, even from turning over completely. Righting a multihull that has gotten upside down

360-712: A vessel rigged in this manner a bezaanjacht ( lit.   ' mizzen yacht ' ). A bezaanjacht is visible in a painting of King Charles II arriving in Rotterdam in 1660. After sailing on such a vessel, Charles was so impressed that his eventual successor, the Prince of Orange presented him with a copy of his own, which Charles named Bezaan . The rig had been introduced to Bermuda some decades before this. Captain John Smith reported that Captain Nathaniel Butler , who

396-478: Is a configuration of mast and rigging for a type of sailboat and is the typical configuration for most modern sailboats. This configuration was developed in Bermuda in the 17th century; the term Marconi , a reference to the inventor of the radio , Guglielmo Marconi , became associated with this configuration in the early 20th century, because the wires that stabilize the mast of a Bermuda rig reminded observers of

SECTION 10

#1732855490975

432-413: Is controlled by its sheet . Originally developed for smaller Bermudian vessels, and ultimately adapted to the larger, ocean-going Bermuda sloop , the Bermuda sail is set as the mainsail on the main mast . The Bermuda rigging has largely replaced the older gaff rigged fore-and-aft sails, except notably on schooners . The traditional design as developed in Bermuda features very tall, raked masts,

468-489: Is difficult in any case and impossible without help unless the boat is small or carries special equipment for the purpose. Multihulls often prove more difficult to tack, since the reduced weight leads directly to reduced momentum, causing multihulls to more quickly lose speed when headed into the wind. Also, structural integrity is much easier to achieve in a one piece monohull than in a two or three piece multihull whose connecting structure must be substantial and well connected to

504-461: Is easier for a short-handed crew to manage. A yawl is similar to a ketch, with a shorter mizzen mast carried astern the rudderpost more for balancing the helm than propulsion. Traditional sailboats are monohulls , but multi-hull catamarans and trimarans are gaining popularity. Monohull boats generally rely on ballast for stability and usually are displacement hulls. This stabilizing ballast can, in boats designed for racing, be as much as 50% of

540-436: Is similar to a sloop with a single mast and mainsail, but generally carries the mast further aft to allow for a jib and staysail to be attached to the head stay and inner forestay, respectively. Once a common racing configuration, today it gives versatility to cruising boats, especially in allowing a small staysail to be flown from the inner stay in high winds. A catboat has a single mast mounted far forward and does not carry

576-421: Is the sloop, which features one mast and two sails, typically a Bermuda rigged main , and a headsail . This simple configuration is very efficient for sailing into the wind. A fractional rigged sloop has its forestay attached at a point below the top of the mast, allowing the mainsail to be flattened to improve performance by raking the upper part of the mast aft by tensioning the backstay. A smaller headsail

612-469: Is what prevents leeway and allows sailing towards the wind. This can be an external piece or a part of the hull. Most monohulls larger than a dinghy require built-in ballast . Depending on the design of the boat, ballast may be 20 to 50 percent of the displacement. The ballast is often integrated into their keels as large masses of lead or cast iron. This secures the ballast and gets it as low as possible to improve its effectiveness. External keels are cast in

648-850: The 1820s that a single-masted sloop would be superior to the schooner he had been racing and was proved correct when the yacht he had commissioned won a secret race against a schooner the night before a public race, and the public race itself the following day. Single-masted sloops quickly became the norm in Bermudian racing, with the introduction of hollow masts and other refinements. The colony's lightweight Bermuda cedar vessels were widely prized for their agility and speed, especially upwind. The high, raked masts and long bowsprits and booms favoured in Bermuda allowed its vessels of all sizes to carry vast areas of sail when running down-wind with spinnakers and multiple jibs, allowing great speeds to be reached. Bermudian work boats, mostly small sloops, were ubiquitous on

684-545: The 19th century in the coastal regions of the United States, particularly New England, where it was widely used by fishermen and sailors. With its straightforward design and uncomplicated rigging, the catboat offers a straightforward and laid-back sailing experience, making it an ideal choice for beginners and pleasure sailors alike. Even today, catboats continue to be cherished by enthusiasts who appreciate their heritage and enjoy their picturesque appearance while cruising through

720-547: The Islands, in the world there are, None in all points that may with them compare." Ships with somewhat similar rigs were in fact recorded in Holland during the 1600s. These early Bermuda rigged boats evidently lacked jibs or booms, and the masts appear not to have been as robust as they were to become (a boat rigged with a Bermuda or gaff mainsail and no jib would today be known as a catboat ). In 1675, Samuel Fortrey, of Kew , wrote to

756-401: The archipelago's waters in the 1800s, moving freight, people, and everything else about. The rig was eventually adopted almost universally on small sailing craft in the 1900s, although as seen on most modern vessels it is very much less extreme than on traditional Bermudian designs, with lower, vertical masts, shorter booms, omitted bowsprits, and much less area of canvas. The term Marconi rig

SECTION 20

#1732855490975

792-481: The bottom end in a receptacle that is supported above the keel of the boat or on the deck or other superstructure that allows the mast to be raised at a hinge point until it is erect. Some masts are supported solely at the keel and laterally at the deck and are called "unstayed". Most masts rely in part or entirely (for those stepped on the deck) on standing rigging , supporting them side-to-side and fore-and aft to hold them up. Masts over 25 feet (7.6 m) may require

828-535: The gaff rig favoured for single-masted vessels. The reason for this was the increased height necessary for a single mast, which led to too much canvas. The solid wooden masts at that height were also too heavy, and not sufficiently strong. This changed when the boats began to be raced in the early 1800s. H. G. Hunt, a naval officer (and possibly the Henry G. Hunt who was the Acting Governor of Bermuda in 1835) concluded in

864-532: The geometry of their design, the wide base of their multiple hulls, for their stability. Designers of performance multihulls, such as the Open 60's , go to great lengths to reduce overall boat weight as much as possible. This leads some to comment that designing a multihull is similar to designing an aircraft. A centreboard or daggerboard is retractable lightweight keel which can be pulled up in shallow water. On small sailboats, masts may be "stepped" (put in place) with

900-470: The hull itself has sufficient buoyancy to remain afloat. A multihull optimized for light weight (at the expense of cruising amenities and storage for food and other supplies), combined with the absence of ballast can result in performance gains in terms of acceleration, top speed, and manoeuvrability. The lack of ballast makes it much easier to get a lightweight multihull on plane, reducing its wetted surface area and thus its drag. Reduced overall weight means

936-450: The hulls. All these hull types may also be manufactured as, or outfitted with, hydrofoils . All vessels have a keel , it is the backbone of the hull. In traditional construction, it is the structure upon which all else depends. Modern monocoque designs include a virtual keel. Even multihulls have keels. On a sailboat, the word "keel" is also used to refer to the area that is added to the hull to improve its lateral plane. The lateral plane

972-573: The mainmast, but forward of the rudder post. The second mast is called the mizzen mast and the sail is called the mizzen sail. A ketch can also be Cutter-rigged with two head sails. A schooner has a mainmast taller than its foremast , distinguishing it from a ketch or a yawl. A schooner can have more than two masts, with the foremast always lower than the foremost main. Traditional topsail schooners have topmasts allowing triangular topsails sails to be flown above their gaff sails ; many modern schooners are Bermuda rigged. The most common modern sailboat

1008-416: The mast and deck, lacking booms. This is the case on two of the three masts of the newly built Spirit of Bermuda , a replica of an 1830s British Royal Navy sloop-of-war . Additional sails were also often mounted on traditional Bermudian craft, when running down wind, which included a spinnaker , with a spinnaker boom, and additional jibs. The main controls on a Bermuda sail are: The development of

1044-629: The naval administrator and Member of Parliament , Samuel Pepys , a treatise entitled Of Navarchi , suggesting the improvement of the Bermoodn rig with the addition of a boom, but evidently nothing came of this. Bermudian builders did introduce these innovations themselves, though when they first appeared has been lost to record. By the 1800s, the design of Bermudian vessels had largely dispensed with square topsails and gaff rig, replacing them with triangular main sails and jibs. The Bermuda rig had traditionally been used on vessels with two or more masts, with

1080-534: The rig is thought to have begun with fore-and-aft rigged boats built by a Dutch-born Bermudian in the 17th century. The Dutch were influenced by Moorish lateen rigs introduced during Spain's rule of their country. The Dutch eventually modified the design by omitting the masts, with the yard arms of the lateens being stepped in thwarts . By this process, the yards became raked masts. Lateen sails mounted this way were known as leg-of-mutton sails in English. The Dutch called

1116-399: The shape of the keel. A monohull's keel is made effective by a combination of weight, depth, and length. Most modern monohull boats have fin keels, which are heavy and deep, but short in relation to the hull length. More traditional yachts carried a full keel which is generally half or more of the length of the boat. A recent feature is a winged keel , which is short and shallow, but carries

Abbott 33 - Misplaced Pages Continue

1152-399: The waterways. A dinghy is a type of small open sailboat commonly used for recreation, sail training , and tending a larger vessel. They are popular in youth sailing programs for their short LOA , simple operation and minimal maintenance. They have three (or fewer) sails : the mainsail , jib , and spinnaker . Ketches are similar to a sloop, but there is a second shorter mast astern of

1188-720: The weight of the boat, but is generally around 30%. It creates two problems; one, it gives the monohull tremendous inertia, making it less maneuverable and reducing its acceleration. Secondly, unless it has been built with buoyant foam or air tanks, if a monohull fills with water, it will sink. Multihulls rely on the geometry and the broad stance of their multiple hulls for their stability, eschewing any form of ballast. Some multihulls are designed to be as light-weight as possible while still maintaining structural integrity. They can be built with foam-filled flotation chambers and some modern trimarans are rated as unsinkable, meaning that, should every crew compartment be completely filled with water,

1224-400: The wires on early radio masts. The rig consists of a triangular sail set aft of the mast with its mainsail raised to the top of the mast; its luff runs down the mast and is normally attached to it for its entire length; its tack is attached at the base of the mast; its foot (in modern versions of the rig) controlled by a boom ; and its clew attached to the aft end of the boom, which

1260-657: Was first applied to the tall Bermuda rig used on larger racing yachts, such as the J class used since 1914 for the America's Cup international yacht races, as - with the many supporting cables required - it reminded observers of Guglielmo Marconi 's mast-like wireless antennas (Marconi's first demonstrations in the United States took place in the autumn of 1899, with the reporting of the America's Cup at New York). Although sometimes treated as interchangeable with Bermuda rig generally, some purists insist that Marconi rig refers only to

1296-595: Was the governor of Bermuda from 1619 to 1622, employed the Dutch boat builder, Jacob Jacobsen, one of the crew of a Dutch frigate which had been wrecked on Bermuda, who quickly established a leading position among Bermuda's boat makers, reportedly building and selling more than a hundred boats within the space of three years (to the resentment of many of his competitors, who were forced to emulate his designs). A poem published by John H. Hardie in 1671 described Bermuda's boats such: "With tripple corner'd Sayls they always float, About

#974025