Misplaced Pages

#837162

100-466: The Yarra Valley Railway is a heritage railway operating on a section of the former Healesville railway which operated between Lilydale and Healesville in the Yarra Valley area northeast of Melbourne, Australia . The Lilydale-Melbourne railway was extended from Lilydale to Yarra Flats (now known as Yarra Glen ) on the 15 May 1888 with intermediate stations at Coldstream and Yering . Part of

200-638: A barrier between the metal surfaces to prevent ice from forming between them (i.e. having frozen together by ice). Such approaches however, may not always be effective for extreme climates since these chemicals will be washed away over time, especially for heavily thrown switches that experience hundreds of throws daily. Heating alone may not always be enough to keep switches functioning under snowy conditions. Wet snow conditions, which generate particularly sticky snow and whiteout conditions, may occur at temperatures just below freezing, causing chunks of ice to accumulate on trains. When trains traverse over some switches,

300-601: A crossover can be used either to detour "wrong-rail" around an obstruction or to reverse direction. A crossover can also join two tracks of the same direction, possibly a pair of local and express tracks, and allow trains to switch from one to the other. On a crowded system, routine use of crossovers (or switches in general) will reduce throughput, as use of the switch blocks multiple tracks. For this reason, on some high-capacity rapid transit systems, crossovers between local and express tracks are not used during normal rush hour service, and service patterns are planned around use of

400-437: A four-train service daily; smaller railways may run daily throughout the summer with only one steam locomotive. The Great Central Railway , the only preserved British main line with a double track, can operate over 50 trains on a busy timetable day. After the privatisation of main-line railways, the line between not-for-profit heritage railways and for-profit branch lines may be blurred. The Romney, Hythe and Dymchurch Railway

500-401: A list which in 2022 reached 26 railway lines. According to article 1, law 128/2017 has as its purpose: "the protection and valorisation of railway sections of particular cultural, landscape and tourist value, which include railway routes, stations and related works of art and appurtenances, and of the historic and tourist rolling stock authorized to travel along them, as well as the regulation of

600-629: A major exception being the Furka Steam Railway , the longest unelectrified line in the country and one of the highest rail crossings in Europe . Many railway companies, especially mountain railways , provide services with well-preserved historic trains for tourists, for instance the Rigi Railways , the oldest rack railway in Europe, and the Pilatus Railway , the steepest in the world. Two railways,

700-428: A narrow-gauge railway, parks were free of redevelopment. Child volunteers and socialist fiscal policy enabled the existence of many of these railways. Children's railways which still carry traffic have often retained their original infrastructure and rolling stock, including vintage steam locomotives; some have acquired heritage vehicles from other railways. Examples of children's railways with steam locomotives include

800-712: A non-polluting fuel. The Villa Elisa Historic Train (operated by Ferroclub Central Entrerriano) runs steam trains between the cities of Villa Elisa and Caseros in Entre Ríos Province , covering 36 km (22 mi) in 120 minutes. The world's second preserved railway, and the first outside the United Kingdom, was Australia's Puffing Billy Railway . This railway operates on 15 miles (24 km) of track, with much of its original rolling stock built as early as 1898. Just about over half of Australia's heritage lines are operated by narrow gauge tank engines, much like

900-401: A pair of linked tapering rails, known as points ( switch rails or point blades ), lying between the diverging outer rails (the stock rails ). These points can be moved laterally into one of two positions to direct a train coming from the point blades toward the straight path or the diverging path. A train moving from the narrow end toward the point blades (i.e. it will be directed to one of

1000-478: A part of the city's new transit system. Another such line, called The Silver Line , operates in San Diego . Railroad switch A railroad switch ( AE ), turnout , or [ set of ] points ( CE ) is a mechanical installation enabling railway trains to be guided from one track to another, such as at a railway junction or where a spur or siding branches off. The most common type of switch consists of

1100-427: A regular crossing. Double outside slip switches are only used in rare, specific cases. A crossover is a pair of switches that connects two parallel rail tracks , allowing a train on one track to cross over to the other. Like the switches themselves, crossovers can be described as either facing or trailing . When two crossovers are present in opposite directions, one after the other, the four-switch configuration

SECTION 10

#1733093972838

1200-505: A section of a modern light rail system. Heritage streetcar systems operating in Little Rock, Arkansas ; Memphis, Tennessee ; Dallas, Texas ; New Orleans, Louisiana ; Boston, Massachusetts ( MBTA Mattapan Trolley ) Philadelphia, Pennsylvania ( SEPTA route 15 ); and Tampa, Florida , are among the larger examples. A heritage line operates in Charlotte, North Carolina , and will become

1300-511: A single iron blade, hinged on a vertical pin that was tapered to lie against the plateway. By 1808, Curr's basic design was in common use. The use of a sprung rail, giving a smooth transition, was patented by Charles Fox in 1838. Prior to the widespread availability of electricity , switches at heavily traveled junctions were operated from a signal box constructed near the tracks through an elaborate system of rods and levers . The levers were also used to control railway signals to control

1400-451: A switch is supplied to leave a track, a second is supplied to allow the train to reenter the track some distance down the line; this allows the track to serve as a siding, allowing a train to get off the track to allow traffic to pass (this siding can either be a dedicated short length of track, or formed from a section of a second, continuous, parallel line), and also allows trains coming from either direction to switch between lines; otherwise,

1500-426: A train could potentially split the points (end up going down both tracks) if the points were to move underneath the train. During trailing moves, the wheels of a train will force the points into the correct position if they attempt to move, although this may cause considerable damage. This act is known as a "run through". In the United Kingdom, FPLs were common from an early date, due to laws being passed which forced

1600-654: A victim of Beeching) was the Middleton Railway ; the second, and the first to carry passengers, was the Bluebell Railway . Not-for-profit heritage railways differ in their quantity of service and some lines see traffic only on summer weekends. The more successful, such as the Severn Valley Railway and the North Yorkshire Moors Railway , may have up to five or six steam locomotives and operate

1700-561: A vintage pit railway and offer mantrip rides into the mine. The Metro 1 (officially the Millennium Underground Railway or M1), built from 1894 to 1896, is the oldest line of the Budapest Metro system and the second-oldest underground railway in the world. The M1 underwent major reconstruction during the 1980s and 1990s, and Line 1 now serves eight original stations whose original appearance has been preserved. In 2002,

1800-442: Is a narrow-gauge railway in central Slovakia , established in the first decade of the 20th century and operating primarily as a freight railway for the local logging industry. From the late 1920s to the early 1960s, it also offered passenger transport between the villages of Hronec and Čierny Balog. The railway became Czechoslovakia 's most extensive forest railway network. After its closure in 1982, it received heritage status and

1900-521: Is a cross-border joint Swiss-Italian heritage area. Trains operating on the Bernina line include the Bernina Express . In July 2023, Ferrovie dello Stato established a new company, the "FS Treni Turistici Italiani" (English: FS Italian Tourist Trains), with the mission "to propose an offer of railway services expressly designed and calibrated for quality, sustainable tourism and attentive to rediscovering

2000-417: Is a lever and accompanying linkages to align the points of a switch by hand. The lever and its accompanying hardware is usually mounted to a pair of long ties (sleepers) that extend from the switch at the points. They are often used in a place of a switch motor on less frequently used switches. In some places, the lever may be some distance from the points, as part of a lever frame or ground frame. To prevent

2100-425: Is a short piece of rail placed alongside the main (stock) rail opposite the crossing. These ensure that the wheels follow the appropriate flangeway through the frog and that the train does not derail. Check rails are often used on very sharp curves, even where there are no switches. A switch motor or switch machine (point motor or point machine) is an electric, hydraulic or pneumatic mechanism that aligns

SECTION 20

#1733093972838

2200-650: Is a stretch of rebuilt narrow-gauge railway on the bank of the old Kovjoki– Nykarleby line. The Buckower Kleinbahn  [ de ] is a 4.9-kilometre (3.0 mi) spur line of the Prussian Eastern Railway , located in the Märkische Schweiz Nature Park in Brandenburg . It was originally constructed in 1897 as a narrow-gauge railway , with a gauge of 750 mm ( 2 ft  5 + 1 ⁄ 2  in ), connecting Buckow to

2300-556: Is an example of a commercial line run as a heritage operation and to provide local transportation, and the Severn Valley Railway has operated a few goods trains commercially. A number of heritage railway lines are regularly used by commercial freight operators. Since the Bluebell Railway reopened to traffic in 1960, the definition of private standard gauge railways in the United Kingdom as preserved railways has evolved as

2400-539: Is applied (art. 2, paragraph 1). At the same time, the law identified a first list of 18 tourist railways, considered to be of particular value (art. 2, paragraph 2). The list is periodically updated by decree of the Ministry of Infrastructure and Transport , in agreement with the Ministry of Economy and Finance and the Ministry of Culture , also taking into account the reports in the State-Regions Conference,

2500-410: Is called a double crossover . If the crossovers in different directions overlap to form an ×, it is dubbed a scissors crossover , scissors crossing , or just scissors ; or, due to the diamond in the center, a diamond crossover . This makes for a very compact track layout at the expense of using a level junction . In a setup where each of the two tracks normally carries trains of only one direction,

2600-617: Is currently being restored. 37°39′35″S 145°29′21″E  /  37.6597°S 145.4891°E  / -37.6597; 145.4891 Heritage railway The British Office of Rail and Road defines heritage railways as follows: ...'lines of local interest', museum railways or tourist railways that have retained or assumed the character and appearance and operating practices of railways of former times. Several lines that operate in isolation provide genuine transport facilities, providing community links. Most lines constitute tourist or educational attractions in their own right. Much of

2700-433: Is measured as the number of units of length for a single unit of separation. In North America this is generally referred to as a switch's "number". For example, on a "number 12" switch, the rails are one unit apart at a distance of twelve units from the center of the frog. In the United Kingdom points and crossings using chaired bullhead rail would be referred to using a letter and number combination. The letter would define

2800-687: Is one of the highest railways in the world . The line has 29 bridges, 21 tunnels, 13 viaducts, two spirals and two zigzags , and its highest point is 4,220 metres (13,850 ft) above sea level. In the Misiones Province , more precisely in the Iguazú National Park, is the Ecological Train of the Forest. With a speed below 20 km per hour to avoid interfering with wildlife and the formations are propelled to liquefied petroleum gas (LPG),

2900-425: Is possible to modify the simpler types of switch to allow trains to pass at high speed. More complicated switch systems, such as double slips, are restricted to low-speed operation. On European high-speed lines, it is not uncommon to find switches where a speed of 200 km/h (124 mph) or more is allowed on the diverging branch. Switches were passed over at a speed of 560 km/h (348 mph) (straight) during

3000-670: The Albula Railway and the Bernina Railway , have been designated as a World Heritage Site , although they are essentially operated with modern rolling stock. Due to the availability of hydroelectric resources in the Alps, the Swiss network was electrified earlier than in the rest of Europe. Some of the most emblematic pre-World War II electric locomotives and trains are the Crocodile , notably used on

3100-654: The Chemin de fer à vapeur des Trois Vallées and PFT operates the Chemin de Fer du Bocq . Heritage streetcar lines: Museums with operational heritage streetcar lines: On the Finnish state-owned rail network , the section between Olli and Porvoo is a dedicated museum line. In southern Finland , it is the only line with many structural details abandoned by the rest of the network which regularly carries passenger traffic. Wooden sleepers , gravel ballast and low rail weight with no overhead catenary make it uniquely historical. Along

Yarra Valley Railway - Misplaced Pages Continue

3200-1203: The Dresden Park Railway in Germany; the Gyermekvasút in Budapest ; the Park Railway Maltanka in Poznań ; the Košice Children's Railway in Slovakia, and the 7 + 1 ⁄ 4  in ( 184 mm ) gauge steam railway on the grounds of St Nicholas' School in Merstham , Surrey , which the children help operate with assistance from the East Surrey 16mm Group and other volunteers. Creating passages for trains up steep hills and through mountain regions offers many obstacles which call for technical solutions. Steep grade railway technologies and extensive tunneling may be employed. The use of narrow gauge allows tighter curves in

3300-652: The Gotthard Railway , and the Red Arrow . Both are occasionally operated by SBB Historic . Switzerland also comprehends a large number of funiculars, several still working with the original carriages, such as the Giessbachbahn . In Britain, heritage railways are often railway lines which were run as commercial railways but were no longer needed (or closed down) and were taken over or re-opened by volunteers or non-profit organisations. The large number of heritage railways in

3400-624: The Kangra Valley Railway are preserved narrow gauge railways under consideration for UNESCO status. Some scenic routes have been preserved as heritage railways. Here normal services have stopped, only tourist heritage trains are operated. Examples of these are the Patalpani–Kalakund Heritage Train and the Rajasthan Valley Queen Heritage train which runs from Marwar Junction to Khamlighat . In Italy

3500-456: The Müncheberg (Mark) station . This line was electrified and changed to standard gauge in 1930. It has operated as a heritage railway since 2002. The Mountain railways of India are the railway lines that were built in the mountainous regions of India . The term mainly includes the narrow-gauge and metre-gauge railways in these regions but may also include some broad-gauge railways. Of

3600-804: The Train of the End of the World to the Tierra del Fuego National Park is considered the world's southernmost functioning railway. Heritage railway operations started in 1994, after restoration of the old 500 mm ( 19 + 3 ⁄ 4  in ) (narrow-gauge) steam railway . In Salta Province in northeastern Argentina, the Tren a las Nubes (Train to the Clouds) runs along 220 km (140 mi) of 1,000 mm ( 3 ft  3 + 3 ⁄ 8  in ) metre gauge track in what

3700-744: The USSR during the Soviet era . Many were called "Pioneer railways", after the youth organisation of that name . The first children's railway opened in Moscow in 1932 and, at the breakup of the USSR, 52 children's railways existed in the country. Although the fall of communist governments has led to the closure of some, preserved children's railways are still functioning in post-Soviet states and Eastern European countries . Many children's railways were built on parkland in urban areas. Unlike many industrial areas typically served by

3800-535: The canton of Graubünden , Switzerland , with the town of Tirano , in the Province of Sondrio , Italy , via the Bernina Pass . Reaching a height of 2,253 metres (7,392 ft) above sea level, it is the third highest railway crossing in Europe . It also ranks as the highest adhesion railway of the continent, and – with inclines of up to 7% – as one of the steepest adhesion railways in

3900-491: The French world speed run of April 2007. The US Federal Railroad Administration has published the speed limits for higher-speed turnouts with No.  26.5 turnout that has speed limit of 60 miles per hour (97 km/h) and No.  32.7 with speed limit of 80 miles per hour (129 km/h). Under cold weather conditions, snow and ice can prevent the proper movement of switch or frog point rails, essentially inhibiting

4000-695: The Healesville Railway Cooperative merged with the Yarra Valley Tourist Railway, who began running trolley services on the Healesville-Yarra Glen section. During the Black Saturday bushfires of February 2009 Yarra Glen station came under ember attack and two timber trestle bridges near Tarrawarra were burnt down in a fast-moving grass fire. Following a track renewal and bridge reconstruction campaign, on 17 July 2010

4100-609: The Healesville-Coldstream section of the line was officially closed to all traffic on 10 March 1983. The Healesville Railway Cooperative was established in 1984 to reopen the line and in 1985 was granted an 'Order In Council' for this section by the Victorian State Government to operate the line as a tourist railway. It was partially reopened as far as Yarra Glen for tourist charter services in 1986 following major bridgework. However, these services ceased by 1990 when

Yarra Valley Railway - Misplaced Pages Continue

4200-626: The Mountain railways of India, the Darjeeling Himalayan , Nilgiri Mountain and Kalka–Shimla Railways have been collectively designated as a UNESCO World Heritage Site . To meet World Heritage criteria, the sites must retain some of their traditional infrastructure and culture. The Nilgiri Mountain Railway is also the only rack and pinion railway in India. The Matheran Hill Railway , along with

4300-802: The Old Patagonian Express) was declared a National Historic Monument by the Government of Argentina in 1999. Trains on the Patagonian 750 mm ( 2 ft  5 + 1 ⁄ 2  in ) narrow-gauge railway use steam locomotives. The 402-kilometre-long (250 mi) railway runs through the foothills of the Andes between Esquel and El Maitén in Chubut Province and Ingeniero Jacobacci in Río Negro Province . In southern Argentina,

4400-620: The UK and most other Commonwealth countries, the term points refers to the entire mechanism. In professional parlance, the term refers only to the movable rails and the entire mechanism is named turnout or points and crossings . Turnout and switch are terms used in North America in all contexts. In some cases, the switch blades can be heat treated for improvement of their service life. There are different kinds of heat treatment processes such as edge hardening or complete hardening. The cross-section of

4500-406: The UK is due in part to the closure of many minor lines during the 1960s' Beeching cuts , and they were relatively easy to revive. There are between 100 and 150 heritage railways in the United Kingdom. A typical British heritage railway will use steam locomotives and original rolling stock to create a period atmosphere, although some are concentrating on diesel and electric traction to re-create

4600-673: The United States as tourist, historic, or scenic railroads. Most are remnants of original railroads, and some are reconstructed after having been scrapped. Some heritage railways preserve entire railroads in their original state using original structures, track, and motive power. Examples of heritage railroads in the US by preservation type: Other operations, such as the Valley Railroad or Hocking Valley Scenic Railway operate on historic track and utilize historic equipment, but are not reflective of

4700-681: The arrangement may also be called a double switch , or more colloquially, a puzzle switch . The Great Western Railway in the United Kingdom used the term double compound points , and the switch is also known as a double compound in Victoria (Australia) . In Italian, the term for a double switch is deviatoio inglese , which means English switch . Likewise, it is called Engels(e) Wissel in Dutch and, occasionally, Engländer ("english one", literally "Englishman") in German. A single slip switch works on

4800-461: The case. A mechanism is provided to move the points from one position to the other ( change the points ). Historically, this would require a lever to be moved by a human operator, and some switches are still controlled this way. However, most are now operated by a remotely controlled actuator called a point machine ; this may employ an electric motor or a pneumatic or hydraulic actuator . This both allows for remote control and monitoring and for

4900-431: The crossing are often connected to move in unison, so the crossing can be worked by just two levers or point motors. This gives the same functionality of two points placed end to end. These compact (albeit complex) switches usually are found only in locations where space is limited, such as station throats (i.e. approaches) where a few main lines spread out to reach any of numerous platform tracks. In North American English,

5000-402: The diamond instead of inside. An advantage over an inside slip switch is that trains can pass the slips with higher speeds. A disadvantage over an inside slip switch is that they are longer and need more space. An outside slip switch can be so long that its slips do not overlap at all, as in the example pictured. In such a case a single, outside slip switch is the same as two regular switches and

5100-404: The earlier type of interlocking. A railroad car 's wheels are primarily guided along the tracks by coning of the wheels, rather than relying on the flanges on the insides of the wheels. When the wheels reach the switch, the wheels are guided along the route determined by which of the two points is connected to the track facing the switch. In the illustration, if the left point is connected,

SECTION 50

#1733093972838

5200-491: The early 1970s, its surviving lines and branches have been (or are being) restored. The railway is owned and operated by the Museum of Kysuce, with a 3.8-kilometre (2.4 mi) line open to tourists for sightseeing. Switzerland has a very dense rail network , both standard and narrow gauge. The overwhelming majority of railways, built between the mid-19th and early 20th century , are still in regular operation today and electrified,

5300-481: The following corresponding radii: Switches are necessary for the operation of a railway, but they do pose a number of risks: Switch-related accidents caused by one or more of these risks have occurred, including: The switch rails or points ( point blades ) are the movable rails which guide the wheels towards either the straight or the diverging track. They are tapered, except on stub switches in industrial sidings, which have square ends. In popular parlance in

5400-418: The frequency of trains, or applying anti-icing chemicals such as ethylene glycol to the trains. The divergence and length of a switch is determined by the angle of the frog (the point in the switch where two rails cross, see below) and the angle or curvature of the switch blades. The length and placement of the other components are determined from this using established formulas and standards. This divergence

5500-437: The heritage railway institute is recognized and protected by law no. 128 of 9 August 2017, which has as its objective the protection and valorisation of disused, suspended or abolished railway lines, of particular cultural, landscape and tourist value, including both railway routes and stations and the related works of art and appurtenances, on which, upon proposal of the regions to which they belong, tourism-type traffic management

5600-452: The historic tunnel. The Railway is also presently rebuilding the 5 miles 48 chains (9.0 km) section from this temporary terminus to Yarra Glen station, including the reconstruction of the Yarra Glen and Tarrawarra stations and the replacement of 14 timber trestle bridges within this section. There are plans to also run Saturday services with the soon to operational DERM . After

5700-494: The latter depend on enthusiastic volunteers for upkeep and operations to supplement revenue from traffic and visitors. Still other heritage railways offer a viable public-transit option, and can maintain operations with revenue from regular riders or government subsidies. Children's railways are extracurricular educational institutions where children and teenagers learn about railway work; they are often functional, passenger-carrying narrow-gauge rail lines. The railways developed in

5800-408: The left wheel will be guided along the rail of that point, and the train will diverge to the right. If the right point is connected, the right wheel's flange will be guided along the rail of that point, and the train will continue along the straight track. Only one of the points may be connected to the facing track at any time; the two points are mechanically locked together to ensure that this is always

5900-462: The length (and hence the radius) of the switch blades and the number would define the angle of the crossing (frog). Thus an A7 turnout would be very short and likely only to be found in tight places like dockyards whereas an E12 would be found as a fairly high speed turnout on a mainline. On the London, Midland and Scottish Railway , switch curvatures were specified from A (sharpest) to F (shallowest), with

6000-635: The line included timber, livestock, milk and dairy products. Early timetables included regular goods services specifically for transporting milk. The last regular steam passenger service was hauled in August 1964. From this time until closure of the line in 1980 passenger services were run using Rail Motors , initially with Walker railmotors but due to degrading track quality the Walkers were replaced by Diesel Electric Railmotors (DERMs) from 1978 onwards. After 9 December 1980 no services operated beyond Coldstream and

6100-550: The line is restored to Yarra Glen, the Tarrawarra to Healesville Section will temporarily close to allow for extensive track maintenance. The railway is in possession of a number of locomotives and carriages, including the following: The Yarra Valley Railway currently runs on a section of track from Healesville to the Tarrawarra Tunnel. The rest of the line between the stop board outside the Tarrawarra Tunnel exit and Yarra Glen

SECTION 60

#1733093972838

6200-652: The line was listed as a UNESCO World Heritage Site . In the Deák Ferenc Square concourse's Millennium Underground Museum, many other artifacts of the metro's early history may be seen. The first heritage railway to be rescued and run entirely by volunteers was the Talyllyn Railway in Wales . This narrow-gauge line, taken over by a group of enthusiasts in 1950, was the beginning of the preservation movement worldwide. La Trochita (officially Viejo Expreso Patagónico,

6300-421: The line, the Hinthaara railway station and the Porvoo railway station area are included in the National Board of Antiquities' inventory of cultural environments of national significance in Finland. Also on the list is scenery in the Porvoonjoki Valley, through which the line passes. The Jokioinen Museum Railway is a stretch of preserved narrow-gauge railway between Humppila and Jokioinen . Nykarleby Järnväg

6400-416: The mechanism are called trailable switches . A switch generally has a straight "through" track (such as the main-line) and a diverging route. The handedness of the installation is described by the side that the diverging track leaves. Right-hand switches have a diverging path to the right of the straight track, when coming from the point blades, and a left-handed switch has the diverging track leaving to

6500-407: The movable switch blades were connected to the fixed closure rails with loose joints, but since steel is somewhat flexible it is possible to obviate this looseness by thinning a short section of the rail's bottom itself. This can be called a heelless switch . Turnouts were originally built with straight switch blades, which ended at the pointed end with a sharp angle. These switches cause a bump when

6600-452: The movement of trains over the points. Eventually, mechanical systems known as interlockings were introduced to make sure that a signal could only be set to allow a train to proceed over points when it was safe to do so. Purely mechanical interlockings were eventually developed into integrated systems with electric control. On some low-traffic branch lines, in self-contained marshalling yards , or on heritage railways , switches may still have

6700-515: The narrow gauge lines of the United Kingdom. The Höllental Railway is a 4.9-kilometre-long (3.0 mi), 760 mm ( 2 ft  5 + 15 ⁄ 16  in ) narrow-gauge ( Bosnian gauge ) railway, operating in Lower Austria . It runs on summer weekends, connecting Reichenau an der Rax to the nearby Höllental . Flanders , Belgium's northern Dutch-speaking region, has the Dendermonde–Puurs Steam Railway ; whereas Wallonia , with its strong history of 19th century heavy industries, has

6800-448: The number of projects and their length, operating days and function have changed. The situation is further muddied by large variations in ownership-company structure, rolling stock and other assets. Unlike community railways , tourist railways in the UK are vertically integrated (although those operating mainly as charities separate their charitable and non-charitable activities for accounting purposes). Heritage railways are known in

6900-421: The official launch of the Walker Railmotor service occurred with the first passenger train service to leave Healesville Railway Station in over 30 years. The Yarra Valley Railway currently runs a railmotor service from Healesville station to a temporary terminus at the back of the Tarrawarra Estate Winery on Sundays and public holidays, crossing the Watts River, under the Donovans Road overbridge and through

7000-428: The only way for a train coming from the opposite direction to use a switch would be to stop, and reverse through the switch onto the other line, and then continue forwards (or stop, if it is being used as a siding). A straight track is not always present; for example, both tracks may curve, one to the left and one to the right (such as for a wye switch ), or both tracks may curve, with differing radii , while still in

7100-407: The operations carried out by the original railroad they operate on. Hence, they do not fit into the Heritage Railway category, but rather Tourist Railway/Amusement. Heritage streetcar lines are operating in over 20 U.S. cities, and are in planning or construction stages in others. Several new heritage streetcar lines have been opened since the 1970s; some are stand-alone lines while others make use of

7200-427: The opposite side. In many cases, such as rail yards, many switches can be found in a short section of track, sometimes with switches going both to the right and left (although it is better to keep these separated as much as feasible). Sometimes a switch merely divides one track into two; at others, it serves as a connection between two or more parallel tracks, allowing a train to switch between them. In many cases, where

7300-405: The other, alternatively to going straight across. A train approaching the arrangement may leave by either of the two tracks on the opposite side of the crossing. To reach the third possible exit, the train must change tracks on the slip and then reverse. The arrangement gives the possibility of setting four routes, but because only one route can be traversed at a time, the four blades at each end of

7400-754: The past in operation. Due to a lack of modern technology or the desire for historical accuracy, railway operations can be handled with traditional practices such as the use of tokens . Heritage infrastructure and operations often require the assignment of roles, based on historical occupations, to the railway staff. Some, or all, staff and volunteers, including Station masters and signalmen , sometimes wearing period-appropriate attire, can be seen on some heritage railways. Most heritage railways use heritage rolling stock, although modern rail vehicles can be used to showcase railway scenes with historical-line infrastructure. While some heritage railways are profitable tourist attractions , many are not-for-profit entities; some of

7500-597: The points with one of the possible routes. The motor is usually controlled remotely by the dispatcher (signaller in the UK). The switch motor also includes electrical contacts to detect that the switch has completely set and locked. If the switch fails to do this, the governing signal is kept at red (stop). There is also usually some kind of manual handle for operating the switch in emergencies, such as power failures, or for maintenance purposes. A patent by W. B. Purvis dates from 1897. A switch stand ( points lever or ground throw )

7600-446: The post-steam era. Many run seasonally on partial routes, unconnected to a larger network (or railway), and charge high fares in comparison with transit services; as a result, they focus on the tourist and leisure markets. During the 1990s and 2000s, however, some heritage railways aimed to provide local transportation and extend their running seasons to carry commercial passenger traffic. The first standard-gauge line to be preserved (not

7700-581: The proper operation of railroad switches. Historically, railway companies have employees keep their railroad switches clear of snow and ice by sweeping the snow away using switch brooms (Basically wire brooms with a chisel attached onto the opposite end of the broom – quite similar to ice scrapers used today), or gas torches for melting ice and snow. Such operation are still used in some countries, especially for branch routes with only limited traffic (e.g. seasonal lines). Modern switches for heavily trafficked lines are typically equipped with switch heaters installed in

7800-476: The proper position without damage. Examples include variable switches, spring switches, and weighted switches. If the points are rigidly connected to the switch control mechanism, the control mechanism's linkages may be bent, requiring repair before the switch is again usable. For this reason, switches are normally set to the proper position before performing a trailing-point movement. Generally, switches are designed to be safely traversed at low speed. However, it

7900-410: The provision of FPLs for any routes traveled by passenger trains – it was, and still is, illegal for a passenger train to make a facing move over points without them being locked, either by a point lock, or temporarily clamped in one position or another. Joints are used where the moving points meet the fixed rails of the switch. They allow the points to hinge easily between their positions. Originally

8000-488: The riches of the Italian territory. Tourism that can experience the train journey as an integral moment of the holiday, an element of quality in the overall tourist experience". There are three service areas proposed: Rail transport played a major role in the history of New Zealand and several rail enthusiast societies and heritage railways have been formed to preserve New Zealand's rich rail history. The Čierny Hron Railway

8100-688: The rolling stock and other equipment used on these systems is original and is of historic value in its own right. Many systems aim to replicate both the look and operating practices of historic former railways companies. Heritage railway lines have historic rail infrastructure which has been substituted (or made obsolete) in modern rail systems. Historical installations, such as hand-operated points , water cranes , and rails fastened with hand-hammered rail spikes , are characteristic features of heritage lines. Unlike tourist railways, which primarily carry tourists and have modern installations and vehicles, heritage-line infrastructure creates views and soundscapes of

8200-409: The same direction. Switches consume a relatively high proportion of a railway maintenance budget. Simple single-bladed switches were used on early wooden railways to move wagons between tracks. As iron-railed plateways became more common in the eighteenth century, cast iron components were made to build switches with check rails. In 1797, John Curr described the system that he developed which used

8300-421: The same principle as a double slip, but provides for only one switching possibility. Trains approaching on one of the two crossing tracks can either continue over the crossing, or switch tracks to the other line. However, trains from the other track can only continue over the crossing, and cannot switch tracks. This is normally used to allow access to sidings and improve safety by avoiding having switch blades facing

8400-451: The shock, vibration, possibly in combination with slight heating caused by braking or a city microclimate, may cause the chunks of ice to fall off, jamming the switches. The heaters need time to melt the ice, so if service frequency is extremely high, there may not be enough time for the ice to melt before the next train arrives, which will then result in service disruptions. Possible solutions include installing higher capacity heaters, reducing

8500-464: The structure included a long timber viaduct with 502 openings near Yarra Glen, spanning the Yarra River and the adjacent flood plains. The extension of the line from Yarra Glen to Healesville required a 1 in 40 (2.5%) climb into a 154.4 metre tunnel with a corresponding descent at nearly the same grade. The Healesville Station opened on 1 March 1889 with an intermediate station at Tarrawarra. Traffic on

8600-460: The switch blades also influences performance. New tangential blades perform better than old-style blades. The crossing is the component that enables passage of wheels on either route through the turnout. It can be assembled out of several appropriately cut and bent pieces of rail or can be a single casting of manganese steel. On lines with heavy use, the casting may be treated with explosive shock hardening to increase service life. A guard rail

8700-423: The switch rails being about 25 mm (0.98 in) less high, and stockier in the middle. Apart from the standard right-hand and left-hand switches, switches commonly come in various combinations of configurations. A double slip switch ( double slip ) is a narrow-angled diagonal flat crossing of two lines combined with four pairs of points in such a way as to allow vehicles to change from one straight track to

8800-405: The tampering of switches by outside means, these switches are locked when not in use. A facing point lock ( FPL ), or point lock , is a device which, as the name implies, locks a set of points in position, as well as mechanically proving that they are in the correct position. The facing point part of the name refers to the fact that they prevent movement of the points during facing moves, where

8900-498: The track, and offers a smaller structure gauge and tunnel size. At high altitudes, construction and logistical difficulties, limited urban development and demand for transport and special rolling-stock requirements have left many mountain railways unmodernized. The engineering feats of past railway builders and views of pristine mountain scenes have made many railways in mountainous areas profitable tourist attractions. Pit railways have been in operation in underground mines all over

9000-492: The train traverses in the turnout direction. The switch blades could be made with a curved point which meets the stockrail at a tangent, causing less of a bump, but the disadvantage is that the metal at the point is thin and necessarily weak. A solution to these conflicting requirements was found in the 1920s on the German Reichsbahn. The first step was to have different rail profile for the stock rails and switch rails, with

9100-463: The two paths, depending on the position of the points) is said to be executing a facing-point movement . For many types of switch, a train coming from either of the converging directions will pass through the switch regardless of the position of the points, as the vehicle's wheels will force the points to move. Passage through a switch in this direction is known as a trailing-point movement and switches that allow this type of movement without damage to

9200-536: The use of ferrocycles". Below is the list of railway lines recognized as tourist railways by Italian legislation. b) pursuant to the Ministerial Decree of 30 March 2022: The Bernina railway line is a single-track 1,000 mm ( 3 ft  3 + 3 ⁄ 8  in ) metre gauge railway line forming part of the Rhaetian Railway (RhB). It links the spa resort of St. Moritz , in

9300-406: The use of stiffer, strong switches that would be too difficult to move by hand, yet allow for higher speeds. In a trailing-point movement (running through the switch in the wrong direction while they are set to turn off the track), the flanges on the wheels will force the points to the proper position. This is sometimes known as running through the switch . Some switches are designed to be forced to

9400-414: The usual direction of traffic. To reach the sidings from what would be a facing direction, trains must continue over the crossing, then reverse along the curved route (usually onto the other line of a double track) and can then move forward over the crossing into the siding. An outside slip switch is similar to the double or single slip switches described above, except that the switch blades are outside of

9500-404: The usually flying junctions at each end of the local-express line. A stub switch lacks the tapered points (point blades) of a typical switch. Instead, both the movable rails and the ends of the rails of the diverging routes have their ends cut off square. The switch mechanism aligns the movable rails with the rails of one of the diverging routes. In 19th century US railroad use, the stub switch

9600-535: The vicinity of their point rails so that the point rails will not be frozen onto the stock rail and can no longer move. These heaters may take the form of electric heating elements or gas burners mounted on the rail, a lineside burner blowing hot air through ducts, or other innovative methods (e.g. geothermal heat sink, etc.) to keep the point & stock rails above freezing temperatures. Where gas or electric heaters cannot be used due to logistic or economic constraints, anti-icing chemicals can sometimes be applied to create

9700-433: The world. Small rail vehicles transport ore, waste rock, and workers through narrow tunnels. Sometimes trains were the sole mode of transport in the passages between the work sites and the mine entrance. The railway's loading gauge often dictated the cross-section of passages to be dug. At many mining sites, pit railways have been abandoned due to mine closure or adoption of new transportation equipment. Some show mines have

9800-617: The world. The elevation difference on the section between the Bernina Pass and Tirano is 1,824 m (5,984 ft), allowing passengers to view glaciers along the line. On 7 July 2008, the Bernina line and the Albula railway line , which also forms part of the RhB, were recorded in the list of UNESCO World Heritage Sites , under the name Rhaetian Railway in the Albula / Bernina Landscapes . The whole site

9900-516: Was restored during the following decade. Since 1992, it has been one of Slovakia's official heritage railways and is a key regional tourist attraction. The Historical Logging Switchback Railway in Vychylovka is a heritage railway in north-central Slovakia, originally built to serve the logging industry in the Orava and Kysuce regions. Despite a closure and dissasembly of most of its original network during

10000-482: Was typically used in conjunction with a harp switch stand . The rails leading up to a stub switch are not secured to the sleepers for several feet, and rail alignment across the gap is not positively enforced. Stub switches also require some flexibility in the rails (meaning lighter rails), or an extra joint at which they hinge. Therefore, these switches cannot be traversed at high speed or by heavy traffic and so are not suitable for main line use. A further disadvantage

#837162