94-838: The Villa Avenue Train Station is one of two former Chicago Aurora and Elgin Railroad (CA&E) stations in Villa Park, Illinois . The building was also used as an office by the Western United Gas and Electric Company. Listed on the National Register of Historic Places in 1986, it is now the home of the Villa Park Historical Society Museum . The station is a Tudor Revival structure built between August and November 1929. The station replaced two smaller waiting rooms on
188-623: A compromise, the railroad gained approval to cut back its service to the Desplaines Avenue station in Forest Park — the westernmost terminus of CTA Garfield Park service, after the CTA ended its unprofitable elevated train service on the CA&;E's Westchester line in 1951. At the new Forest Park terminal, riders would transfer from the CA&E interurban to a CTA train to complete their commute into
282-633: A few months of the cutback, half of the line's passengers abandoned it in favor of the parallel commuter service provided by the Chicago and North Western Railroad — today operated by Metra as the Union Pacific West Line . The loss of one-seat commuter service to the Loop devastated the interurban. The railroad's financial condition was already shaky, and schemes to restore downtown service faced various legal or operational obstacles. As early as 1952,
376-579: A final freight train on the Leadville-Climax branch in Colorado. On July 1, 1965, Harry Murphy retired from his position as president of the CB&;Q (he remained on the railroad as a director until October), and former Frisco Railway president Louis W. Menk took over as president and CEO. During his presidency, Louis Menk explored ways to reduce costs for the CB&Q's passenger operations and to reshape
470-460: A light, powerful diesel engine that could stand the rigors of continuous, unattended daily service. The experiences of developing these engines can be summed up shortly by General Motors Research vice-president Charles Kettering : "I do not recall any trouble with the dip stick." Ralph Budd, accused of gambling on diesel power, chirped that "I knew that the GM people were going to see the program through to
564-466: A massive 6,000-pound flywheel), and it had issues with overheating (even with the best metals of the day, its cylinder heads and liners would warp and melt in a matter of minutes), so it was therefore deemed impractical. Diesel engines of that era were obese, stationary monsters and were best suited for low-speed, continuous operation. It was not reliable for a railroad locomotive; there was no diesel engine suitable for that purpose then. Always innovating,
658-710: A subsequent public outcry and protest over the program's cancellation, the No. 4960 locomotive pulled the railroad's final excursion train on July 17. The railroad operated a number of streamlined passenger trains known as the Zephyrs which were one of the most famous and largest fleets of streamliners in the United States. The Burlington Zephyr , the first American diesel -electric powered streamlined passenger train, made its noted "dawn-to-dusk" run from Denver, Colorado , to Chicago, Illinois , on May 26, 1934. On November 11, 1934,
752-505: A year, to say nothing of the long-term effects of the new superhighway on the railroad's revenue. Another long-term concern was the railroad's downtown terminal; the new median strip line would have no access to Wells Street Terminal. Instead, the replacement line would access the Loop through the Milwaukee-Dearborn Subway , where wood-bodied cars, which still made up a good portion of CA&E rolling stock, were prohibited. As
846-475: Is one of only four CA&E stations still standing. Today it is found along the Illinois Prairie Path , which was constructed along the former CA&E right-of-way . The building was designed by Arthur U. Gerber , staff-architect of Samuel Insull who owned the CA&E at the time. The single-story building is rectangular, measuring 28 by 104 feet (8.5 m × 31.7 m). A gable roof covers
940-474: The "Roarin' Elgin" or the "Great Third Rail" , was an interurban railroad that operated passenger and freight service on its line between Chicago and Aurora , Batavia , Geneva , St. Charles , and Elgin , Illinois . The railroad also operated a small branch to Mt. Carmel Cemetery in Hillside and owned a branch line to Westchester . Wounded by the increased use of automobiles after World War II ,
1034-616: The Galena and Chicago Union Railroad would bypass their towns in favor of West Chicago on its route; at the time, that was the only line running west from Chicago. The Aurora Branch was built from Aurora, through Batavia, to Turner Junction in what is now West Chicago. The line was built with old strap rail and minimal, if any, grading. Using a leased locomotive and cars, the Aurora Branch ran passenger and freight trains from Aurora to Chicago via its own line from Aurora to Turner Junction and one of
SECTION 10
#17330927281211128-828: The Mississippi River at both Burlington and Quincy, giving the railroad through connections with the Burlington and Missouri River Railroad (B&MR) in Iowa and the Hannibal & St. Joseph Railroad (H&StJ) in Missouri. In 1860 the H&;SJ carried the mail to the Pony Express upon reaching the Missouri River at St. Joseph, Missouri . In 1862 The first Railway Post Office was inaugurated on
1222-619: The Trailways Transportation System , and still provides intercity service to this day as Burlington Trailways . 1940 was the final year the CB&Q added steam locomotives to their roster, having completed construction on their O-5A class locomotives at the West Burlington, Iowa shops. With their freight traffic weighing 31 million tons that year, the CB&Q saw no further necessity for any more steam or diesel locomotives to be added to their roster. In 1942, following
1316-641: The Twin Cities , the Burlington Route formed a natural connection between Hill's home town (and headquarters) of St. Paul, Minnesota , and the railroad hub of Chicago. Moreover, Hill was willing to meet Perkins' $ 200-a-share asking price for the Burlington's stock. By 1900, Hill's Great Northern, in conjunction with the Northern Pacific Railway , held nearly 100 percent of Burlington's stock. By 1899,
1410-420: The U.S. Supreme Court . The only major strike in the line's history came in 1888, the Burlington railway strike of 1888 . Unlike most strikes, which were based on unskilled workers, this one was based on the highly skilled well-paid engineers and firemen, a challenge to management prerogatives. A settlement would have been much cheaper, but President Perkins was determined to assert ownership rights and destroy
1504-637: The AE&;FRE south to Yorkville then north to Dundee . AE&C management announced later that evening that they planned on opening the line on July 1. The AE&FRE announced soon afterward that it would offer express transfer service from Fox Valley communities to the AE&C. On May 17, the AE&C tested the powerhouse in Batavia and found several problems with its performance. Heavy rains in June stalled construction and washed out some completed roadbed. The opening date
1598-557: The Aurora, Wheaton, & Chicago Rail road Company. Pomeroy-Mandelbaum was the second largest interurban railway company in Ohio and intended to compete against the Everett-Moore group. A meeting between the Everett-Moore syndicate and Pomeroy-Mandelbaum group occurred in either 1900 or 1901 to discuss the future of the two companies. They came to an agreement: Everett-Moore would build and maintain
1692-448: The Batavia powerhouse. The AE&C issued promotional leaflets to citizens of Fox Valley cities and towns. They also sent these pamphlets to settlements west of Aurora, hoping that people would take a steam train to Aurora and then transfer to the electric line. They boasted that the AE&C was the "finest electric railroad in the world." By the end of the year, the AE&C was seeing monthly earnings in excess of $ 16,500. In addition,
1786-640: The Burlington Railroad must be included into a powerful transcontinental system. Though the railroad stretched as far west as Denver and Billings, Montana , it had failed to reach the Pacific Coast during the 1880s and 1890s, when construction was less expensive. Though approached by E. H. Harriman of the Union Pacific Railroad , Perkins felt his railroad was a more natural fit with James J. Hill 's Great Northern Railway . With its river line to
1880-577: The Burlington Route was able to enter the trade markets in 1862. From that year to date, the railroad and its successors have paid dividends continuously, and never run into debt or defaulted on a loan—the only Class I U.S. railroad for which this is true. After extensive trackwork was planned, the Aurora Branch changed its name to the Chicago and Aurora Railroad in June 1852, and to Chicago, Burlington, and Quincy Railroad in 1856, and shortly reached its two other namesake cities, Burlington, Iowa , and Quincy, Illinois . In 1868 CB&Q completed bridges over
1974-665: The Burlington by GN and NP, expansion continued. In 1908, the CB&Q purchased both the Colorado and Southern Railway and the Fort Worth and Denver Railway , giving it access south to Dallas and the Gulf of Mexico ports in Houston and Galveston . It also extended its reach south in the Mississippi Valley region by opening up a new line from Concord, Illinois , south to Paducah, Kentucky . It
SECTION 20
#17330927281212068-661: The Burlington included: The California Zephyr is still operated daily by Amtrak as trains Five (westbound) and Six (eastbound). Another Amtrak train, the Illinois Zephyr , is a modern descendant of the Kansas City Zephyr and the American Royal Zephyr services. Multiple locomotives from the Burlington have been preserved, including two Zephyr power units, thirty-five steam locomotives , and thirty-four diesel locomotives . Originally, 5632 (O-5B 4-8-4)
2162-535: The CA&E abruptly ended passenger service in 1957. Freight service was suspended in 1959, and the railroad was officially abandoned in 1961. Most of the right-of-way has since been converted to the Illinois Prairie Path rail trail . The first known attempt to create an electric railway between the metropolis of Chicago and the Fox Valley settlement of Aurora was in late 1891. By this time, passengers in Aurora and Elgin were served by steam railways. Elgin
2256-404: The CA&E into the city found themselves stranded when they returned to take the train home. Freight operations continued for two more years until June 10, 1959. No trains ran after this point, but the right-of-way and rolling stock were preserved in the event that a party stepped forward to purchase the property. The official abandonment of CA&E came at 5:00pm on July 6, 1961, four years after
2350-901: The CA&E that still exist. Chicago, Burlington and Quincy The Chicago, Burlington and Quincy Railroad ( reporting mark CBQ ) was a railroad that operated in the Midwestern United States . Commonly referred to as the Burlington Route , the Burlington , CB&Q , or as the Q , it operated extensive trackage in the states of Colorado , Illinois , Iowa , Missouri , Nebraska , Wisconsin , Wyoming , and also in Texas through subsidiaries Colorado and Southern Railway , Fort Worth and Denver Railway , and Burlington-Rock Island Railroad . Its primary connections included Chicago , Minneapolis–Saint Paul , St. Louis , Kansas City , and Denver . Because of this extensive trackage in
2444-544: The CB&Q created a subsidiary, the Burlington Transportation Company , to operate intercity buses in tandem with its railway network. On January 1, 1932, the CB&Q received a new president; former Great Northern Railroad president Ralph Budd . By which time, the CB&Q was facing a decline in passenger ridership from the Depression, and U.S. President Franklin D. Roosevelt was exploring ways to help
2538-749: The CB&Q merged with the Great Northern, Northern Pacific, and the Spokane, Portland and Seattle (SP&S) railroads on March 2, 1970, to form the Burlington Northern Railroad (BN), with Louis Menk serving as the company's first president and CEO (twenty-six years later, the BN and Santa Fe Railroads merged to become the Burlington Northern and Santa Fe Railway (BNSF)). Most passenger operations would be assumed in 1971 by Amtrak . Beginning in
2632-741: The CB&Q's commercial passenger operations was completed on September 26, 1952, when the last of the 4-6-2 locomotives that operated for the Chicago-Aurora suburban service were retired; the remaining steam locomotives on the CB&Q were primarily reassigned as freight haulers and yard switchers. The first division on the CB&Q to be fully dieselized was the Casper Division in Wyoming, where EMD GP7 road switchers were delivered in 1951. In 1955, regular performance on class 3 overhauls on steam locomotives were discontinued, and Harry C. Murphy opted for
2726-408: The CB&Q's new steam excursion program, only two of which remained operational by 1961: 2-8-2 No. 4960 and 4-8-4 No. 5632. In 1962, the CB&Q's passenger department began sponsoring the excursion runs by offering ticket discounts to paying customers, and the Burlington began to host several school trains for school students. In 1964, steam excursion operations on the railroad had dwindled, in
2820-505: The CB&Q, completed in 1922. Burlington's rapid expansion after the American Civil War was based upon sound financial management, dominated by John Murray Forbes of Boston and assisted by Charles Elliott Perkins . Perkins was a powerful administrator who eventually forged a system out of previously loosely held affiliates, virtually tripling Burlington's size during his presidency from 1881 to 1901. Ultimately, Perkins believed
2914-445: The Chicago & Aurora Interurban Railway with a $ 1 million investment. However, the railroad was unable to secure additional funds; it failed to meet an 1893 construction deadline and effectively ceased operation thereafter. A second attempt came two years later with the Chicago, Elgin & Aurora Electric Railway. Plans called for the railroad to run through Turner (now West Chicago ), Wheaton , and Glen Ellyn . Like its predecessor,
Villa Avenue station - Misplaced Pages Continue
3008-587: The Everett-Moore group sold off several assets, including their shares of the railroad company totaling $ 200,000. The Pomeroy-Mandelbaum group still held a large share in the company and became leaders in its operation. The G. C. Kuhlman Car Company was tasked with providing thirty passenger cars but, for unknown reasons, the deal fell through. An order was placed with the Niles Car and Manufacturing Company in March 1902 for ten cars. Niles Cars were in such high demand that
3102-475: The G&;CU's two tracks east from there to Chicago. The G&CU required the Aurora Branch to turn over 70 percent of their revenue per ton-mile handled on that railroad; as a result, in the mid-1850s, surveys were ordered to determine the best route for a railroad line to Chicago. The line from Aurora to Chicago was built through the fledgling towns of Naperville , Lisle , Downers Grove , Hinsdale , Berwyn , and
3196-457: The H&StJ to sort mail on the trains way across Missouri. The B&MR continued building west into Nebraska as a separate company, the Burlington & Missouri River Rail Road , founded in 1869. During the summer of 1870 it reached Lincoln , the newly designated capital of Nebraska and by 1872 it reached Kearney, Nebraska . That same year the B&;MR across Iowa was absorbed by the CB&Q. By
3290-951: The Metropolitan West Side Elevated at 52nd Avenue for an additional five cents. Service began at 5:33am and concluded at 11:33pm, with trains running every thirty minutes. Terminals were opened to the public at 52nd Avenue, Austin Avenue (in Chicago), Oak Park , Harlem Avenue (in Forest Park ), Maywood , Bellwood , Wolf Road (in Hillside ), South Elmhurst , Secker Road (in Villa Park ), Lombard , Glen Ellyn, College Avenue (in Wheaton), Wheaton, Gary Road (in Wheaton), Chicago Golf Grounds, Warrenville, Ferry Road (in Warrenville), Eola Junction (in Aurora), and Aurora. A one-way trip from Aurora to Chicago
3384-461: The United States' entrance into World War II , the railroad's freight traffic increased to 49 million tons, with Ralph Budd (now named President Roosevelt's federal transportation commissioner) poised to ensure his company would help the war effort. In 1943, the War Production Board authorized EMC (now reincorporated as EMD) to construct sixteen FT locomotives for delivery to the CB&Q
3478-455: The city. This terminal consisted of two loop tracks (one for CA&E and one for CTA) where passengers could make a cross-platform transfer between the interurban and trains of the CTA operating over the temporary street-level trackage — and presumably the eventual new median strip Congress line . Unfortunately, with the change being put into effect on September 20, 1953, CA&E riders lost their one-seat ride to downtown Chicago. Within
3572-615: The company had rostered 1,205 locomotives, 936 passenger cars and 40,720 freight cars. In 1901, a rebuffed Harriman tried to gain an indirect influence over the Burlington by launching a stock raid on the Northern Pacific. Though Hill managed to fend off this attack on his nascent system, it led to the creation of the Northern Securities Company , and later, the Northern Securities Co. v. United States ruling by
3666-497: The company was unable to fulfill the full order, but did deliver the AE&C's first six cars on July 29, 1902. The cars were 74,325 pounds (33,713 kg) with four 125 horsepower (93 kW) motors and 36-inch (910 mm) wheels. They were described as "miniature Pullmans " and could seat forty-six or fifty-two passengers. Another twenty cars were ordered from the John Stephenson Car Company and would arrive after
3760-427: The early 1950s not only loomed as a source of further drain on CA&E traffic, but the right-of-way of the new highway necessitated the demolition of the CTA's Garfield Park elevated line, which the CA&E depended upon to reach its downtown terminus. The expressway's construction plans provided a dedicated right-of-way for trains in the highway's median strip . However, during the estimated five years to complete
3854-407: The east side of Villa Park. The western portion of the station served passengers, while the eastern portion functioned as a Western United Gas and Electric Company office. Both the railroad and the utility company were owned by utilities mogul Samuel Insull . Realtors Ballard & Pottinger would offer free railway trips to the station on Sundays to show off properties in the local region. The station
Villa Avenue station - Misplaced Pages Continue
3948-541: The final passenger trains had run. The real estate became part of the Aurora Corporation of Illinois, a small conglomerate, which slowly sold off the right-of-way and other properties. Portions of the right-of-way are now operated as a multi-use trail called the Illinois Prairie Path . Besides the right-of-way , most of which has been retained as the Illinois Prairie Path , there are two depots, two combination depot/substations, and 19 pieces of rolling stock from
4042-507: The following year, by which time, the road's freight traffic peaked 57 million tons. After World War II ended, the CB&Q began ordering additional diesel locomotives from EMD, as part of a $ 140-million program to dieselize their roster. August 31, 1949, was Ralph Budd's final day as president of the railroad before he would retire during that year's Chicago Railroad Fair , and Harry C. Murphy succeeded him in September. Dieselisation of
4136-643: The former Burlington-Rock Island Railroad ). In 1970, it merged with the Northern Pacific Railway and the Great Northern Railway to form the Burlington Northern Railroad . The earliest predecessor of the Chicago, Burlington and Quincy, the Aurora Branch Railroad , was chartered by act of the Illinois General Assembly on October 2, 1848. The charter was obtained by citizens of Aurora and Batavia, Illinois , who were concerned that
4230-565: The inspection was otherwise considered a success. For the next three days, engineers tested the line from Aurora to Wheaton so that they would have a familiarity with the track. Despite a malfunctioning power system, a group of nearly-untrained motormen, and only six pieces of operational rolling stock, the Aurora branch of the Chicago Aurora and Elgin Railroad opened on August 25, 1902. Fares were 25 cents one-way and 45 cents round-trip. Passengers who wanted to enter The Loop had to transfer to
4324-426: The intended rolling stock. Original plans called for the third rail to guide the car, but the company experienced many electrical problems along its power lines. By the time the third rail was functioning properly, two hundred and fifty utility poles had burned to the ground due to faulty insulators . A final inspection took place on August 21 from Wheaton to Elmhurst. Although problems with the utility poles were noted,
4418-533: The intention of retiring the oldest wooden cars that had been on the railroad's roster from its earliest years. However, the postwar years saw increasing shifts of passengers away from rail traffic and into automobiles, and then the CA&E found the rug pulled from beneath the railroad. The plans for construction of the Congress Street Expressway (now known as the Eisenhower Expressway ) in
4512-435: The interurban's lines used a third rail for power collection, which was relatively unusual for interurban railroads. While third rail had become the standard for urban elevated railroad and subway systems, most interurban railroads used trolley poles to pick up power from overhead wire ; the AE&C only used trolley wire where necessary, such as in the few locations where the interurban had street running . Originally,
4606-531: The largest obstacles in the railway's construction. Construction escalated following the winter months; by April, the third rail had been completed between Aurora and Wheaton. Later that month, the railway connected to the Metropolitan West Side Elevated Railroad at 52nd Avenue (modern day Laramie Avenue) in Chicago. The company operated steam locomotives on completed portions to deliver construction goods to where they were needed. Wheaton
4700-534: The last commercial steam assignment for the railroad at Herrin Junction on January 27, 1959 (the only major U.S. railroads to operate revenue steam after this date were Union Pacific, Illinois Central , Nickel Plate Road , Norfolk and Western , Grand Trunk Western , Duluth, Missabe and Iron Range , and Lake Superior and Ishpeming ). CB&Q subsidiary Colorado and Southern eventually ended their commercial steam operations on October 11, 1962, when 2-8-0 No. 641 pulled
4794-476: The main line at Wheaton, and allowed trains from Chicago to reach the Fox Valley city in sixty-five minutes. When opened, the AE&C was able to change its schedules to allow trains to leave 52nd Avenue every fifteen minutes, alternating between Aurora and Elgin. All trains at this point ran locally, stopping at every station. The AE&C briefly considered expanding to Mendota in late 1903, but determined that it
SECTION 50
#17330927281214888-487: The management of Dr. Thomas Conway Jr. A branch from Bellwood to Westchester opened October 1, 1926. CRT's elevated train service was extended onto the branch; the "L" company was the sole provider of passenger service on the branch and this new service replaced the CA&E's own local service on its main line east of Bellwood. Utilities magnate Samuel Insull gained control of the CA&E in 1926. Insull and his corporate interests had already taken over and improved
4982-476: The midwest and mountain states, the railroad used the advertising slogans "Everywhere West", "Way of the Zephyrs ", and "The Way West". In 1967, it reported 19,565 million net ton-miles of revenue freight and 723 million passenger miles; corresponding totals for C&S were 1,100 and 10 and for FW&D were 1,466 and 13. At the end of the year, CB&Q operated 8,538 route-miles, C&S operated 708, and FW&D operated 1,362 (these totals may or may not include
5076-470: The nearby Chicago, Burlington and Quincy Railroad had a dramatic decrease of passengers between Aurora and Chicago. The twenty cars from Stephenson arrived in December 1902. Fifteen cars were equipped with motors (even numbers 30–58) and five did not (odd numbers 101–109); these latter five cars were intended to only be used as trailing cars. Trailing cars would often be added or removed at Wheaton depending on
5170-472: The number of passengers. The Stephenson cars were almost identical in every respect to the Niles cars. These new cars reduced the travel time between Aurora and Chicago to one hour. The new cars also allowed the railroad to operate at faster speeds—one run from 52nd Avenue to Aurora averaged 65 miles per hour (105 km/h). Service to Elgin began on May 29, 1903. The 17.5-mile (28.2 km) branch split off from
5264-489: The previously incorporated Everett-Moore companies were merged into one, renamed the Aurora, Elgin & Chicago Railway Company (AE&C). Three million dollars' worth of bonds were issued in 1901 to support track construction. Construction commenced on September 18, 1900, when the AE&C started to grade its right-of-way . The AE&C received permission to cross existing track lines in February 1902, alleviating one of
5358-445: The properties of the North Shore and South Shore Lines. Insull's plans to make similar improvements to the CA&E were scrapped as the result of the Great Depression . With the collapse of his utilities empire, Insull was forced to sell his interest in the CA&E, and the railroad was once again bankrupt by 1932. The line connecting West Chicago with Geneva and St. Charles was abandoned October 31, 1937. The railroad
5452-416: The rail industry improve. Ralph Budd subsequently asked for a streamlined stainless-steel train to be built, and this resulted in the railroad introducing the famous Zephyrs . As early as 1897, the railroad invested in alternatives to steam power, namely, internal-combustion engines. The railroad's shops in Aurora had built a three-horsepower distillate motor in that year, but it was not reliable (requiring
5546-736: The railroad failed to acquire the necessary funds for construction. Yet another group incorporated the DuPage Interurban Electric Railway in 1897, but was met with a similar fate. Small electric lines opened in the 1890s that connected the municipalities of the Fox River Valley. A profitable streetcar railway stretched from Aurora north to Carpentersville . The success of this railway inspired investors to again attempt an electric connection to Chicago. A group led by F. Mahler, E. W. Moore, Henry A. Everett, Edward Dickinson, and Elmer Barrett formed independent railway lines that were projected to stretch from Aurora and Elgin to Chicago. These two companies were incorporated on February 24, 1899. The Everett-Moore group
5640-462: The railroad had sought to substitute buses for trains, and after years of financial losses, in April 1957 the Illinois Commerce Commission authorized the railroad to discontinue passenger service. Passenger groups and affected municipalities sought injunctions that forced the railroad to temporarily continue service, but as soon as court rulings cleared the way, management abruptly ended passenger service, at noon on July 3, 1957. Commuters who had ridden
5734-433: The railroad purchased "doodlebug" gas-electric combine cars from Electro-Motive Corporation (EMC) and built their own, sending them out to do the jobs of a steam locomotive and a single car. After the positive results the doodlebug cars created, and after having purchased and used three General Electric steeple-cab switchers powered by distillate engines, Ralph Budd requested the Winton Engine Company to design and construct
SECTION 60
#17330927281215828-408: The railroad's Chicago terminus was the 52nd Avenue station that it shared with the Garfield Park elevated railroad line of the Metropolitan West Side Elevated Railroad , and where passengers transferred between interurban and elevated trains. Beginning on March 11, 1905, the interurban began operating over the Metropolitan's "L" tracks, allowing AE&C trains to directly serve downtown Chicago. At
5922-444: The railroad's remaining steam fleet to use up their previously-restored mileage throughout the next year. By which time, the majority of the Burlington's steam fleet were relegated to operate east of Lincoln, Nebraska, with only two steam locomotives held for back-up service west of Lincoln. The final division on the CB&Q to be fully dieselized was the Beardstown Division in Southern Illinois, where 2-8-2 locomotive No. 4997 worked
6016-409: The railway was opened. One final problem for the AE&C was finding enough qualified motormen to run the trains. The company found none in the immediate area and had to recruit sixteen men from Dayton , Ohio . Another inspection tour occurred on August 4, from Wheaton to 52nd Avenue. A Niles Car was pulled by a steam locomotive along the track to ensure that none of the curves were too sharp for
6110-422: The railways connecting Aurora to Chicago while the Pomeroy-Mandelbaum group would control railways linking cities in the Fox River Valley (eventually consolidating as the Aurora, Elgin and Fox River Electric Company [AE&FRE]). A third railway, the Batavia & Eastern Railway Company, was incorporated by the Everett-Moore group in 1901 to link the town of Batavia to the Aurora line. On March 12, 1901, all of
6204-407: The road's freight operations. Passenger service was markedly reduced, as people had shifted to using private automobiles for transportation. In late 1966, Louis Menk became president of the Northern Pacific, leaving William John Quinn in charge of the CB&Q. As the financial situation of American railroading continued to decline throughout the 1960s, forcing restructuring across the country,
6298-409: The same time, the Metropolitan's Garfield Park service was extended west of 52nd Avenue, replacing the AE&C as the provider of local service over the interurban's surface-level trackage as far west as Desplaines Avenue in Forest Park . The interurban's trains terminated at the stub-ended Wells Street Terminal , adjacent to the Loop elevated . The interurban continued to use the "L" tracks through
6392-425: The summer of 1955, the CB&Q hosted a series of occasional steam excursion trains per request of railfan clubs, such as the Illinois Railroad Club. Harry C. Murphy was a steam fan who recognized the popularity in steam locomotives, and he authorized additional steam excursion trains to take place on the railroad throughout the late 1950s and early 1960s. Twenty-one steam locomotives of varying classes took part in
6486-403: The superhighway, both "L" and interurban trains would need to use a temporary street-level right-of-way. When the plans circulated in 1951, CA&E objected to the arrangement, citing the effects on running time and scheduling of its trains as they negotiated the streets of Chicago's busy West Side at rush hour. The railroad estimated that the delays would cost the railroad nearly a million dollars
6580-433: The system grew. By the early 1900s, the shops at Aurora served the Chicago Division, the shops in Galesburg, Illinois served the Galesburg Division, the shops in Hannibal, Missouri served the St. Louis Division, the shops in West Burlington, Iowa and in Creston, Iowa served the Iowa Division, and the shops in Denver, Colorado served the McCook and Red Cloud Divisions. The latter were the final steam era shops built for
6674-417: The third rail. Steam boilers were fed with coal provided by the Chicago, Burlington & Quincy Railroad . On April 11, 1902, they signed a contract with General Electric to provide electrical generators, transformers, and converters for the powerhouse. The line completed a network of utility poles through the right-of-way, allowing communication and power exchange between electrical substations along
6768-692: The time the Missouri River bridge at Plattsmouth, Nebraska , was completed the B&MR in Nebraska was well on its way to Denver . That same year, the Nebraska B&;MR was purchased by the CB&Q, which completed the line to Denver by 1882. Early repair shops for rolling stock were built by the Aurora Branch Railroad in Chicago, but the first true shop site was established at Aurora, Illinois in 1855. These were capable of repairing and building locomotives, freight cars, and passenger cars. Other shop sites were established or inherited from predecessor lines as
6862-476: The track in Aurora, Warrenville , and Lombard . A fifth station was built southeast of Wayne for the Elgin branch. The substations converted the alternating current in the power lines to a lower- voltage direct current for use in the third rail. After its completion, the power station also provided power for at least three small trolley lines and several Fox Valley communities. The Cleveland Construction Company
6956-486: The train was put into regularly scheduled service between Lincoln, Nebraska , and Kansas City, Missouri . Although the distinctive, articulated stainless steel trains were well known, and the railroad adopted the "Way of the Zephyrs " advertising slogan, they did not attract passengers back to the rails en masse , and the last one was retired from revenue service with the advent of Amtrak . The Zephyr fleet included: Other named passenger trains which operated on
7050-451: The union threat. The fight dragged on 10 months before the financially and emotionally exhausted strikers finally gave up, and Perkins declared a total victory. However, he had spent heavily on strikebreakers, lawsuits, and police protection, hurting the balance sheets and putting the railroad in a poor position to face the nationwide depression of the Panic of 1893 . Following the purchase of
7144-480: The very end. Actually, I wasn't taking a gamble at all." The manifestation of this gamble was the eight-cylinder Winton 8-201A engine that powered the Burlington Zephyr (built 1934) on its record-breaking run, and it opened the door for developing the long line of diesel engines that has powered Electro-Motive locomotives for the next seventy years. In 1936, the CB&Q would become one of the founding members of
7238-609: The waiting room section and the portico. The roof includes a limestone chimney and synthetic shingles. Window and door frames are made of wood. Walls are built with wood, stucco and limestone. The southern elevation features a 4-foot (1.2 m) limestone wall topped with two rows of limestone blocks. The western portion includes a stone-arched window with mullioned casements. The eastern half has three high square windows. The three gables are half-timbered and stuccoed. Chicago Aurora and Elgin Railroad The Chicago Aurora and Elgin Railroad ( CA&E ), known colloquially as
7332-421: The wake of rising operation and maintenance costs and a loss of experienced steam locomotive mechanics; the only factors that kept the CB&Q's steam program going were public demand and Harry Murphy's passion for steam. In the process of reducing operating costs for the railroad, Harry Murphy's successor, Louis Menk, ordered for the CB&Q's steam excursion program to be shut down by August 1, 1966. Despite
7426-438: The west side of Chicago. It was opened in 1864, and passenger and freight service began. Regular commuter train service started in 1864 and remains operational to this day, making it the oldest surviving regular passenger service in Chicago. Both the original Chicago line, and to a much lesser extent, the old Aurora Branch right of way, are still in regular use today by the Burlington's present successor BNSF Railway . The company
7520-578: The years of Chicago Rapid Transit Company (CRT) ownership and into the Chicago Transit Authority (CTA) era. World War I was tough for the AE&C, and the railroad entered bankruptcy in 1919. Having shed the Fox River Lines (an interurban which paralleled the Fox River ), the reorganized company emerged from bankruptcy as the Chicago Aurora and Elgin Railroad on July 1, 1922, under
7614-563: Was Ohio 's largest interurban railroad company and had experience administrating several lines around Cleveland , most notably the Lake Shore Electric Railway . These two companies, the Aurora, Wheaton & Chicago Railway and Elgin & Chicago Railway, were incorporated on February 24, 1899. Only one day after their founding, a second group of Cleveland-based investors, led by the Pomeroy-Mandelbaum group, incorporated
7708-566: Was across the street from the American Ovaltine factory, the largest employer in the village. Villa Park eventually became the largest commuter customer for the railroad. Villa Avenue Train Station closed on July 3, 1957, due to the decline of the CA&E. On August 22, 1986, it was listed on the National Register of Historic Places . Today the station is the headquarters of the Villa Park Historical Society Museum. It
7802-549: Was during this period that the Burlington was at its largest, exceeding just over 12,000 route miles in 14 states by the 1920s. With the First World War having the same effect on the railroad as on all other railroads, during the 1920s, the Burlington Route had an increasingly heavy amount of equipment flooding the yards. With the advent of the Great Depression , the CB&Q held a good portion of this for scrap. In 1929,
7896-565: Was hired to build the line. All three rails were traditional "T" design rails laid on stone ballast . Wooden railroad ties were laid 2,816 ties to the mile and separated at standard gauge . Every fifth tie was 9 feet (2.7 m) long to support the third rail. The majority of the line was a double track , with a single track running from the Chicago Golf Club to Aurora. Roadbeds for the double track were 30 feet (9.1 m) wide and were surrounded by woven wire fencing . The third rail
7990-607: Was never acted upon, and was repealed by an act of February 14, 1855, which instead reorganized the line as the Chicago, Burlington and Quincy Railroad. The new railroad was formed by the consolidation of the Chicago and Aurora Railroad, the Central Military Tract, the west end of the Peoria & Oquawka, and the Northern Cross Railroad companies. With a steady acquisition of locomotives, cars, equipment, and trackage,
8084-517: Was not worth the financial risk. Though cars primarily carried passengers, some early morning cars carried light freight. Notably, the AE&C reached a deal with the Chicago Record Herald in October 1903 to distribute the paper to the suburbs along the line. On December 1, 1909, the railroad added a branch from near Wheaton to Geneva. This was extended to St Charles August 25, 1910. Most of
8178-423: Was preserved, but later scrapped. The Burlington was a leader in innovation; among its firsts were use of the printing telegraph (1910), train radio communications (1915), streamlined passenger diesel power (1934) and vista-dome coaches (1945). In 1927, the railroad was one of the first to use Centralized Traffic Control (CTC) and by the end of 1957 had equipped 1,500 miles (2,400 km) of its line. It played
8272-549: Was pushed to July 12, but delays in rolling stock production further stalled it to August. Poor investments forced the Everett-Moore syndicate to sell its shares in the AE&C in mid-1902. The company had formed a telephone company, but struggled to compete with the Bell Telephone Company . In addition, one of their construction companies went bankrupt , spurring a credit crisis in Cleveland. Creditors demanded pay, and
8366-406: Was renamed Chicago and Aurora Railroad on June 22, 1852, and given expanded powers to extend from Aurora to a point north of LaSalle ; this extension, to Mendota, was completed on October 20, 1853. Another amendment, passed February 28, 1854, authorized the company to build east from Aurora to Chicago via Naperville , and changed its name to Chicago and Southwestern Railroad. The latter provision
8460-457: Was selected as the site of the railroad's headquarters, car barn, and machine shop . $ 1.5 million in preferred stock was issued in April 1902 to cover unexpected costs. AE&C purchased a 28-acre (11 ha) lot south of Batavia and constructed a power station to provide electricity. Commercial electric power was not yet available at the time, so the railroad needed to provide its own power for
8554-586: Was served by the Milwaukee Road , Geneva and West Chicago served by the Chicago and North Western Railway , St. Charles served by the Chicago Great Western , and Aurora was served by the Chicago, Burlington and Quincy (CB&Q). However, it was thought that an electric line would greatly facilitate interurban travel, as there would be no freight trains to slow passenger trains. A group of investors founded
8648-568: Was seventy-five minutes. The final four cars from the Niles Car Company arrived on September 5 and were put into service seven days later. The original train schedules posted at stations showed service on the Batavia branch. However, actual service did not begin until the last week of September 1902. The Batavia branch met the Aurora branch at Eola Junction. Even when opened, the Batavia branch experienced little traffic and may have been primarily used as convenient transport for railroad officials to
8742-442: Was unable to exit from bankruptcy until 1946. Even though the railroad suffered from low revenue, high debt, and shortage of capital, wartime revenues and hopes for a stronger customer base in the growing west suburban region led the railroad to undertake an improvement of its service. The railroad made substantial improvements to its physical plant and acquired ten new all-steel passenger cars in 1946 and made plans for eight more, with
8836-409: Was usually placed on the inner sides of the double track, providing safety for residents and employees. The third rail was interrupted at railroad crossings , where a cable was placed underground to carry the current across the 75-foot (23 m) gap. The first inspection trip of the 34.5-mile (55.5 km) line was held on May 16, 1902. the train departed from 52nd Avenue to Aurora, then traversed
#120879