Misplaced Pages

#805194

43-598: Studenec may refer to places: Czech Republic [ edit ] Studenec (Semily District) , a municipality and village in the Liberec Region Studenec (Třebíč District) , a municipality and village in the Vysočina Region Studenec, a village and part of Čelechovice na Hané in the Olomouc Region Studenec, a hamlet and part of Nicov in

86-496: A darning egg and a separate comb-like piece with teeth to hook the warp over; these are used for repairing knitted garments and are like a linear knitting spool . Darning looms were sold during World War Two clothing rationing in the United Kingdom and Canada, and some are homemade. Circular looms are used to create seamless tubes of fabric for products such as hosiery, sacks, clothing, fabric hoses (such as fire hoses) and

129-477: A loom that folds into a narrow space when not in use. Loom frames can be roughly divided, by the orientation of the warp threads, into horizontal looms and vertical looms. There are many finer divisions. Most handloom frame designs can be constructed fairly simply. The back-strap loom (also known as belt loom) is a simple loom with ancient roots, still used in many cultures around the world (such as Andean textiles ). It consists of two sticks or bars between which

172-441: A lot of floor space, and full-time professional weavers are unlikely to use them as they are unergonomic. Their cheapness and portability is less valuable to urban professional weavers. In a treadle loom, the shedding is controlled by the feet, which tread on the treadles . The earliest evidence of a horizontal loom is found on a pottery dish in ancient Egypt , dated to 4400 BC. It was a frame loom, equipped with treadles to lift

215-418: A shed. To create the counter-shed, a heddle-bar is usually used. A heddle-bar is simply a stick placed across the warp and tied to individual warp threads. When it is lifted, it pulls the warp threads it is tied to out of position, creating a shed. A warp-weighted loom (see diagram) typically uses a heddle-bar. It has two upright posts (C); they support a horizontal beam (D), which is cylindrical so that

258-591: A single-shaft loom. The different shafts (also called harnesses) must be controlled by some mechanism. While non-rigid heddles generally mean that two shafts are needed even for a plain tabby weave , twill weaves require three or more (depending on the type of twill), and more complex figured weaves require still more harnesses. Treadle looms can control multiple harnessess with multiple treadles. The weaver selects which harnesses are engaged with their feet. One treadle may be connected to more than one harness, and any number of treadles can be engaged at once, meaning that

301-482: A tabletop. others are backstraps looms with a rigid heddle , and very portable. There exist very small hand-held looms known as darning looms. They are made to fit under the fabric being mended, and are often held in place by an elastic band on one side of the cloth and a groove around the loom's darning-egg portion on the other. They may have heddles made of flip-flopping rotating hooks (see Loom#Rotating-hook heddles ) . Other devices sold as darning looms are just

344-399: Is a device that replaces the drawboy, the weaver's helper who used to control the warp threads by pulling on draw threads. "Dobby" is a corruption of "draw boy". Mechanical dobbies pull on the draw threads using pegs in bars to lift a set of levers. The placement of the pegs determines which levers are lifted. The sequence of bars (they are strung together) effectively remembers the sequence for

387-461: Is a device used to weave cloth and tapestry . The basic purpose of any loom is to hold the warp threads under tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same. The word "loom" derives from the Old English geloma , formed from ge- (perfective prefix) and loma , a root of unknown origin;

430-488: Is also called the takeup roll ). The portion of the fabric that has already been formed but not yet rolled up on the takeup roll is called the fell . Not all looms have two beams. For instance, warp-weighted looms have only one beam; the warp yarns hang from this beam. The bottom ends of the warp yarns are tied to dangling loom weights. A loom has to perform three principal motions : shedding, picking, and battening. There are also usually two secondary motions , because

473-600: Is different from Wikidata All article disambiguation pages All disambiguation pages Studenec (Semily District) The villages of Rovnáčov and Zálesní Lhota are administrative parts of Studenec. Studenec is located about 40 kilometres (25 mi) southeast of Liberec . It lies in the Giant Mountains Foothills . The highest point is the hill Stráž at 630 m (2,070 ft) above sea level. The Oleška River originates in Rovnáčov and flows through

SECTION 10

#1732876653806

516-409: Is used for narrow work . It is also used to finish edges, weaving decorative selvage bands instead of hemming. There are heddles made of flip-flopping rotating hooks, which raise and lower the warp, creating sheds . The hooks, when vertical, have the weft threads looped around them horizontally. If the hooks are flopped over on side or another, the loop of weft twists, raising one or the other side of

559-553: Is used to control each warp thread separately, allowing very complex patterns. A drawloom requires two operators, the weaver, and an assistant called a "drawboy" to manage the figure harness. The earliest confirmed drawloom fabrics come from the State of Chu and date c. 400 BC. Some scholars speculate an independent invention in ancient Syria , since drawloom fabrics found in Dura-Europas are thought to date before 256 AD. The draw loom

602-403: The weft (i.e. "that which is woven") is inserted so that it passes over and under the warp threads. The ends of the warp threads are usually fastened to beams. One end is fastened to one beam, the other end to a second beam, so that the warp threads all lie parallel and are all the same length. The beams are held apart to keep the warp threads taut. The textile is woven starting at one end of

645-710: The Banská Bystrica Region Slovenia [ edit ] Studenec, Postojna , a village in the Inner Carniola region Studenec na Blokah , a village in the Inner Carniola region Studenec pri Krtini , a settlement in the Upper Carniola region Studenec (Ljubljana) , a formerly independent settlement in the City Municipality of Ljubljana Studenec, Sevnica , a settlement in the municipality of Sevnica [REDACTED] Topics referred to by

688-762: The South Bohemian Region Studenec, a village and part of Oloví in the Karlovy Vary Region Studenec, a village and part of Svojanov in the Pardubice Region Studenec, a village and part of Trutnov in the Hradec Králové Region Slovakia [ edit ] Studenec (Levoča District) , a municipality and village in the Prešov Region Banský Studenec , a municipality and village in

731-500: The backstrap loom. The warp-weighted loom is a vertical loom that may have originated in the Neolithic period. Its defining characteristic is hanging weights (loom weights) which keep bundles of the warp threads taut. Frequently, extra warp thread is wound around the weights. When a weaver has woven far enough down, the completed section (fell) can be rolled around the top beam, and additional lengths of warp threads can be unwound from

774-477: The beams can be simply held apart by hooking them behind pegs driven into the ground, with wedges or lashings used to adjust the tension. Pegged looms may, however, also have horizontal sidepieces holding the beams apart. Such looms are easy to set up and dismantle, and are easy to transport, so they are popular with nomadic weavers. They are generally only used for comparatively small woven articles. Urbanites are unlikely to use horizontal floor looms as they take up

817-489: The design. Multiple rows of holes are punched on each card and the many cards that compose the design of the textile are strung together in order. It is based on earlier inventions by the Frenchmen Basile Bouchon (1725), Jean Baptiste Falcon (1728), and Jacques Vaucanson (1740). To call it a loom is a misnomer. A Jacquard head could be attached to a power loom or a handloom, the head controlling which warp thread

860-525: The establishment of a weaving mill in 1911, which grew into one of the most important textile companies in pre-war Czechoslovakia under the brand Fejfar & Mládek. There are no railways or major roads passing through the municipality. The main landmark of Studenec is the Church of Saint John the Baptist. Its current Neo-Romanesque form dates from 1868. Studenec is twinned with: Loom A loom

903-415: The fell. The nature of the loom frame and the shedding, picking, and battening devices vary. Looms come in a wide variety of types, many of them specialized for specific types of weaving. They are also specialized for the lifestyle of the weaver. For instance, nomadic weavers tend to use lighter, more portable looms, while weavers living in cramped city dwellings are more likely to use a tall upright loom, or

SECTION 20

#1732876653806

946-422: The finished cloth can be rolled around it, allowing the loom to be used to weave a piece of cloth taller than the loom, and preserving an ergonomic working height. The warp threads (F, and A and B) hang from the beam and rest against the shed rod (E). The heddle-bar (G) is tied to some of the warp threads (A, but not B), using loops of string called leashes (H). So when the heddle rod is pulled out and placed in

989-466: The forked sticks protruding from the posts (not lettered, no technical term given in citation), the shed (1) is replaced by the counter-shed (2). By passing the weft through the shed and the counter-shed, alternately, cloth is woven. Heddle-rods are used on modern tapestry looms. Tablet weaving uses cards punched with holes. The warp threads pass through the holes, and the cards are twisted and shifted to created varied sheds. This shedding technique

1032-497: The like. Tablet weaving can be used to knit tubes, including tubes that split and join. Small jigs also used for circular knitting are also sometimes called circular looms, but they are used for knitting, not weaving. It is possible to weave by manually threading the weft over and under the warp threads, but this is slow. Some tapestry techniques use manual shedding. Pin looms and peg looms also generally have no shedding devices. Pile carpets generally do not use shedding for

1075-436: The loop, which creates the shed and countershed. Rigid heddles are generally used on single-shaft looms. Odd warp threads go through the slots, and even ones through the circular holes, or vice-versa. The shed is formed by lifting the heddle, and the countershed by depressing it. The warp threads in the slots stay where they are, and the ones in the circular holes are pulled back and forth. A single rigid heddle can hold all

1118-400: The municipality. According to chronicles, in the 11th century, the hill Stráž (literally 'guard') under its Latin name Custodius was a guarding point near a trade route. The first written mention of Studenec is from 1395, when it was administered by the nearby Levín Castle. From the early 16th century until 1584, Studenec was a property of the noble Trčka of Lípa family. Another notable owner

1161-636: The newly constructed fabric must be wound onto cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beam, unwinding from it. To become fully automatic, a loom needs a tertiary motion , the filling stop motion. This will brake the loom if the weft thread breaks. An automatic loom requires 0.125 hp to 0.5 hp to operate (100W to 400W). A loom, then, usually needs two beams, and some way to hold them apart. It generally has additional components to make shedding, picking, and battening faster and easier. There are also often components to help take up

1204-417: The number of different sheds that can be selected is two to the power of the number of treadles. Eight is a large but reasonable number of treadles, giving a maximum of 2 =256 sheds (some of which will not have enough threads on one side to be useful). The weaver must remember the sequence of treadling needed to produce the pattern. A drawloom is for weaving figured cloth. In a drawloom, a "figure harness"

1247-577: The pattern. Speed is lower, and shedding and picking devices may be simpler. Looms used for weaving traditional tapestry are called not as "vertical-warp" and "horizontal-warp", but as "high-warp" or "low-warp" (the French terms haute-lisse and basse-lisse are also used in English). Inkle looms are narrow looms used for narrow work . They are used to make narrow warp-faced strips such as ribbons, bands, or tape. They are often quite small; some are used on

1290-409: The pile, because each pile thread is individually knotted onto the warps, but there may be shedding for the weft holding the carpet together. Usually weaving uses shedding devices. These devices pull some of the warp threads to each side, so that a shed is formed between them, and the weft is passed through the shed. There are a variety of methods for forming the shed. At least two sheds must be formed,

1333-426: The same term This disambiguation page lists articles about distinct geographical locations with the same name. If an internal link led you here, you may wish to change the link to point directly to the intended article. Retrieved from " https://en.wikipedia.org/w/index.php?title=Studenec&oldid=1173950316 " Category : Place name disambiguation pages Hidden categories: Short description

Studenec - Misplaced Pages Continue

1376-408: The shed and the countershed. Two sheds is enough for tabby weave ; more complex weaves, such as twill weaves , satin weaves , diaper weaves , and figured (picture-forming) weaves, require more sheds. A shed-rod (shedding stick, shed roll) is simply a stick woven through the warp threads. When pulled perpendicular to the threads (or rotated to stand on edge, for wide, flat shedding rods), it creates

1419-477: The threads (those passing through the heddles), and lowering the shaft lowers the same threads — the threads passing through the spaces between the heddles remain in place. A treadle loom for figured weaving may have a large number of harnesses or a control head. It can, for instance, have a Jacquard machine attached to it (see Loom#Shedding methods) . Tapestry can have extremely complex wefts, as different strands of wefts of different colours are used to form

1462-420: The warp threads, and progressing towards the other end. The beam on the finished-fabric end is called the cloth beam . The other beam is called the warp beam . Beams may be used as rollers to allow the weaver to weave a piece of cloth longer than the loom. As the cloth is woven, the warp threads are gradually unrolled from the warp beam, and the woven portion of the cloth is rolled up onto the cloth beam (which

1505-416: The warp threads, leaving the weaver's hands free to pass and beat the weft thread. A pit loom has a pit for the treadles, reducing the stress transmitted through the much shorter frame. In a wooden vertical-shaft loom, the heddles are fixed in place in the shaft. The warp threads pass alternately through a heddle, and through a space between the heddles (the shed ), so that raising the shaft raises half

1548-450: The warp threads, though sometimes multiple rigid heddles are used. Treadles may be used to drive the rigid heddle up and down. Rigid heddles (above) are called "rigid" to distinguish them from string and metal heddles, where each warp thread has its own heddle, which has an eye at each end and one in the middle for the warp thread. The eyes in the ends are fastened to a shaft, all in a row. This requires multiple shafts; it cannot be done on

1591-563: The warps are stretched. One bar is attached to a fixed object and the other to the weaver, usually by means of a strap around the weaver's back. The weaver leans back and uses their body weight to tension the loom. Both simple and complex textiles can be woven on backstrap looms. They produce narrowcloth : width is limited to the weaver's armspan. They can readily produce warp-faced textiles, often decorated with intricate pick-up patterns woven in complementary and supplementary warp techniques, and brocading. Balanced weaves are also possible on

1634-400: The weaver. Computer-controlled dobbies use solenoids instead of pegs. The Jacquard loom is a mechanical loom, invented by Joseph Marie Jacquard in 1801, which simplifies the process of manufacturing figured textiles with complex patterns such as brocade , damask , and matelasse . The loom is controlled by punched cards with punched holes, each row of which corresponds to one row of

1677-408: The weights to continue. This frees the weaver from vertical size constraint. Horizontally, breadth is limited by armspan; making broadwoven cloth requires two weavers, standing side by side at the loom. Simple weaves, and complex weaves that need more than two different sheds, can both be woven on a warp-weighted loom. They can also be used to produce tapestries. [REDACTED] In pegged looms,

1720-502: The whole word geloma meant a utensil, tool, or machine of any kind. In 1404 "lome" was used to mean a machine to enable weaving thread into cloth. By 1838 "loom" had gained the additional meaning of a machine for interlacing thread. Weaving is done on two sets of threads or yarns, which cross one another. The warp threads are the ones stretched on the loom (from the Proto-Indo-European * werp , "to bend" ). Each thread of

1763-448: Was Albrecht von Wallenstein , who bought it in 1628, but sold it shortly afterwards. In the 19th century, the domestic textile production rapidly expanded and Studenec became nicknamed "village of weavers". At the beginning of the 20th century, the village had 2,500 inhabitants and more than 1,200 looms worked in cottages. With the development of industrial production, domestic weaving gradually disappeared. However, its tradition led to

Studenec - Misplaced Pages Continue

1806-550: Was invented in China during the Han dynasty ( State of Liu ?); foot-powered multi-harness looms and jacquard looms were used for silk weaving and embroidery, both of which were cottage industries with imperial workshops. The drawloom enhanced and sped up the production of silk and played a significant role in Chinese silk weaving. The loom was introduced to Persia, India, and Europe. A dobby head

1849-402: Was raised during shedding. Multiple shuttles could be used to control the colour of the weft during picking. The Jacquard loom is the predecessor to the computer punched card readers of the 19th and 20th centuries. The weft may be passed across the shed as a ball of yarn, but usually this is too bulky and unergonomic. Shuttles are designed to be slim, so they pass through the shed; to carry

#805194