This is an accepted version of this page
86-581: Sterling Cotton Mill , also known as the Franklinton Cotton Mill, is a historic cotton mill complex located at 108-112 East Green Street in Franklinton , Franklin County, North Carolina . The main mill is a one and two-story L-shaped brick building with Industrial Italianate style design elements. The mill consists of five sections: the original gabled one-story section rising to a two-story section at
172-628: A five-storey masonry box; high, long and narrow, with ranges of windows along each side and large relatively unbroken internal spaces, it provided the basic architectural prototype that was followed by cotton mills and English industrial architecture through to the end of the 19th century. Arkwright recruited large, highly disciplined workforces for his mills, managed credit and supplies and cultivated mass consumer markets for his products. By 1782 his annual profits exceeded £40,000, and by 1784 he had opened 10 more mills. He licensed his technology to other entrepreneurs and in 1782 boasted that his machinery
258-408: A greater attention to decoration and the main gate was often highlighted with stone decoration. The stair columns were exterior to the main floors. During this period the mules got wider and the width of the bays increased. Specialised mill architects appeared. Mills of this period were tall, narrow, and wide. They were commonly built with one or two wings to form an 'L' or 'U' shape. Brunswick Mill
344-441: A major shareholder, and by 1840 lay at the centre of a major industrial complex powered by five steam engines, that included a twist mill, foundry and a rum distillery. Just before 1870, a mill was built by a joint-stock spinning company and this financial structure led to a new wave of mill construction. The phrase Oldham Limiteds describes these companies. Family-run firms continued to build, but grouped into associations such as
430-405: A marketing system emerged. In 1738, John Kay started to improve the loom. He improved the reed, and invented the raceboard, the shuttleboxes and the picker which together allowed one weaver to double his output. This invention is commonly called the flying shuttle . It met with violent opposition and he fled from Lancashire to Leeds. Though the workers thought this was a threat to their jobs, it
516-402: A mill was defined by the positioning of machines. In an 1870 mill the bay was typically 10 feet 6 inches (3.20 m), and the brick vaults 5 feet 3 inches (1.60 m) though there were variations. Engines were run at higher pressures and from 1875, powered horizontal shafts on each floor by means of ropes. This was a prominent change as a rope race had to be built running
602-526: A nearby reservoir that powered the water wheel, but were later used as the mill's primary power source. The Corliss valve was adopted in the UK, where in 1868 more than 60 mill engines were fitted with them. The large steam-powered Bowreath Cotton Mills opened at Fort Gloster near Calcutta by British interests in the 1820s, using British women to impart machine-spinning skills to the local workforce. They closed down in 1837 but reopened with Dwarkanath Tagore as
688-530: A patent (no. 962) on his invention, the Spinning Jenny—a machine for spinning, drawing and twisting cotton. By this time a number of spinners in Lancashire were using copies of the machine, and Hargreaves sent notice that he was taking legal action against them. The manufacturers met, and offered Hargreaves £3,000. He at first demanded £7,000, and stood out for £4,000, but the case eventually fell apart when it
774-478: A period of even greater prosperity. The limited companies took control of spinning, while the room and power system was the norm for the weaving sheds. One point of view in the 1880s was that vertically integrating the weaving sheds into new mills would reduce costs and lead to greater profits. This route had been followed in New England, where it was successful, but not in Lancashire. The industry peaked in 1907. There
860-564: A second mill in Birmingham set up by Samuel Touchet in 1744, about which little is known, but which was sufficiently successful for Touchet later to seek the lease on the mill in Northampton. The Paul-Wyatt mills spun cotton for several decades but were not very profitable, becoming the ancestors of the cotton mills that followed. Richard Arkwright obtained a patent for his water frame spinning machinery in 1769. Although its technology
946-514: A shaft (Little Mill, 1908), and then later on individual machines. Mills constructed in South Carolina increased in size. At Rutledge Ford the Saluda River was dammed and a power plant constructed. It was completed in 1904 before the construction of a state-of-the-art textile mill in 1906. That power plant provided for 4,800 horse power. The mill contained 30,000 spindles. By 1916 a new mill
SECTION 10
#17330855072521032-428: A shortage of building materials restricted the building of new mills, and activity was financial with the mills seeking recapitalisation. There is no clear concession on the reason for the final decline. Some say that the cotton men concentrated on making easy money ignoring the possibility of foreign competition best countered by larger mills by re-equipping the mills with more modern ring frames. Daniels and Jewkes argued
1118-449: A square brick structure between the boiler house and the chimney. The engines were double compound upright beam engines of the type patented by McNaught in 1845. Each room in the mill would have line shafts suitable for the type of frame, connected by belt drives or gearing. In 1860, there were 2650 cotton mills in the Lancashire region, employing 440,000 people. The workers, 90 per cent of whom were adults and 56 per cent females, were paid
1204-403: A total of £11.5 million per annum. The mills used 300,000 hp of power, of which 18,500 was generated by waterpower. The mills had 30,387,467 spindles and 350,000 power looms . The industry imported 1,390,938,752 lb of raw cotton a year. It exported 2,776,218,427 yards of cotton cloth and 197,343,655 pounds (89,513,576 kg) of twist and yarn. The total value of its exports
1290-483: A two-storey ancillary building. Large mills remained the exception during this period. In 1833 the largest mill was that of McConnel and Company in Ancoats , Manchester with 1,545 workers, but in 1841 there were still only 25 mills in Lancashire with 1,000 workers or more, and the number of workers in the average mill was 193. The Lancashire boiler was patented in 1844, and the economiser in 1845. This can be seen as
1376-448: A wheel which caused all the spindles to revolve, and the thread to be spun. When the bars were returned, the thread wound onto the spindle. A pressing wire (faller) was used to guide the threads onto the right place on the spindle. In the 17th century, England was famous for its woollen and worsted cloth. That industry was centred in the east and south in towns such as Norwich which jealously protected their product. Cotton processing
1462-560: Is a multi- spindle spinning frame , and was one of the key developments in the industrialisation of textile manufacturing during the early Industrial Revolution . It was invented in 1764–1765 by James Hargreaves in Stan hill, Oswaldtwistle , Lancashire in England. The device reduced the amount of work needed to produce cloth , with a worker able to work eight or more spools at once. This grew to 120 as technology advanced. The yarn produced by
1548-601: Is now home to the Lofts @ Sterling Mill (apartments) and Inter Technologies. This article about a property in Franklin County, North Carolina on the National Register of Historic Places is a stub . You can help Misplaced Pages by expanding it . Cotton mill A cotton mill is a building that houses spinning or weaving machinery for the production of yarn or cloth from cotton , an important product during
1634-558: The Cotton Industry Act 1959 and was then used by the John Myers mail order company. One mill was later demolished leaving the other to be used as a Shopping Outlet Centre and Craft Village. The reduction of capacity led to a legacy of redundant mills, which were readily reused for other industrial purposes. Ring spinning technology had successfully replaced the spinning mule, with mills having been converted mules to rings. However, in
1720-494: The Fine Spinners' and Doublers' Association . Joseph Stott of Oldham perfected a method of fireproof floor construction using steel beams supporting brick vaults that in turn supported concrete floors that would support heavier equipment. Ring frames replaced mule frames; they were heavier and larger and were placed transversely, the floors became larger (up to 130 feet (40 m) wide) and higher to provide light. The bay size in
1806-619: The Great Depression . Cotton mills and their owners dominated the economy and politics of the Piedmont well into the 20th century. The modern Indian mechanised textile industry was born in 1854, when a steam-powered mill was opened in Bombay by Cowasjee N. Davar. More followed: there were 10 by 1865 and 47 by 1875. By 1880 there were 58 mills in India employing 40,000 workers, with over 80% of them in
SECTION 20
#17330855072521892-601: The Industrial Revolution in the development of the factory system . Although some were driven by animal power , most early mills were built in rural areas at fast-flowing rivers and streams, and used water wheels for power. The development of viable steam engines by Boulton and Watt from 1781 led to the growth of larger, steam-powered mills. They were built in a concentrated way in urban mill towns , such as Manchester . Together with neighbouring Salford , it had more than 50 mills by 1802. The mechanisation of
1978-507: The Isle of Bute using labour that had experience of the linen industry. By 1800 there were two water-powered mills at Gatehouse of Fleet employing 200 children and 100 adults. Robert Owen who had worked for Peter Drinkwater in Manchester, developed the mills at New Lanark built by his father-in-law, David Dale under licence from Arkwright. Spinning jenny The spinning jenny
2064-472: The Lancashire Coalfield began to develop before 1800. Many more people were employed by the mills. The first cotton mills were established in the 1740s to house roller spinning machinery invented by Lewis Paul and John Wyatt . The machines were the first to spin cotton mechanically "without the intervention of human fingers". They were driven by a single non-human power source which allowed
2150-516: The weaving process was more gradual partly because of the success of John Kay 's 1733 invention of the flying shuttle , which increased the productivity of domestic hand loom weavers. Kay took out a patent for the application of water power to a Dutch loom in 1745 and opened a weaving factory in Keighley in 1750, but nothing is known of its success. A further attempt to mechanise the weaving process took place at Garrett Hall in Manchester in 1750 but
2236-461: The 1970s, the depleted industry was challenged by a new technology open-end or break spinning. In 1978 Carrington Viyella opened a factory to do open-end spinning in Atherton . This was the first new textile production facility in Lancashire since 1929. Immediately Pear Mill, Stockport and Alder Mill, Leigh were closed. These were both Edwardian mills designed by Stott and Sons. The mill built in 1978
2322-555: The Beverly Cotton Manufactory and a mill in Derbyshire in which he had worked. From 1825 the steam engine was able to power larger machines constructed from iron using improved machine tools. Mills from 1825 to 1865 were generally constructed with wooden beamed floors and lath and plaster ceilings. William Fairbairn experimented with cast iron beams and concrete floors. Mills were of red brick or sometimes local stone with
2408-607: The Nottingham mill was at an experimental stage, Arkwright and his partners started work on Cromford Mill in Derbyshire, which "was to prove a major turning point in the history of the factory system". It resembled the Paul-Wyatt water-powered mill at Northampton in many respects, but was built on a different scale, influenced by John Lombe 's Old Silk Mill in Derby and Matthew Boulton 's Soho Manufactory in Birmingham. Constructed as
2494-481: The US, and it was in turn surpassed by China in 1977. Though there was a slight revival after 1945, mills closed. The most efficient mills had abandoned their steam engines, and were working the frames with individual electric motors. Broadstone Mills Stockport , was built as a double mill with 265,000 mule spindles, but by 1959 it was running 37,500 mule spindles and 70,000 ring spindles. It closed in 1959 taking advantage of
2580-510: The United States employs 140 workers in 2013 to produce an output that would have required more than 2,000 workers in 1980. Cotton mills were not confined to Lancashire but were built in northeast Cheshire , Derbyshire , Nottingham , the West Riding of Yorkshire , Bristol , Durham and the west of Scotland. The availability of streams or rivers to provide power determined the location of
2666-485: The ban on exporting technology from the UK, one of its proprietors, Francis Cabot Lowell , had travelled to Manchester to study the mill system and memorised some of its details. In the same year, Paul Moody built the first successful power loom in the US. Moody used a system of overhead pulleys and leather belting, rather than bevel gearing, to power his machines. The group devised the Waltham System of working, which
Sterling Cotton Mill - Misplaced Pages Continue
2752-421: The boilers and condense the steam. The chimneys were round and taller. Three types of engines were used: triple expansion horizontal cross compound engines, Inverted marine type compounds which were more compact, and Manhattans with vertical and horizontal cylinders such as the 3500 hp engine at New Pear Mill. Rope drives were used exclusively. Electricity was gradually introduced firstly on group drives driving
2838-856: The brook. Mills were built around Rochdale and Littleborough . North of Bury , ten mills occupied a mile long stretch of a stream in the Shuttleworth Valley. Other mills were built north of the River Ribble and a cluster of five mills in Caton near the port at Lancaster , one of which belonged to Samuel Greg who built Quarry Bank Mill at Styal in Cheshire. Not all water-powered mills were in rural areas, after 1780 mills were built in Blackburn and Burnley . In Scotland, four cotton mills were built in Rothsay on
2924-512: The cities of Bombay and Ahmedabad . From the 1870's India's own markets for finished yarn and cloth ceased to be dominated by imports from Lancashire , and during the 1870's and 1880 s the Bombay cotton industry began to replace exports of yarn from Britain to China . The cotton industry was subject to cycles of boom and slump, which caused waves of mill building. There was an optimism that dictated that slumps had to be endured and then there would be
3010-573: The cotton could be processed into fabric where it grew, saving transportation costs. The mills were usually combination mills (spinning and weaving), that were water powered and used a slow burn design technique. They used a belt and pulley drive system, and heavier ring frames rather than mules. At this point they only spun and wove coarse counts. The mills were mainly in open country and mill towns were formed to support them. New England mills found it increasingly difficult to compete, and as in Lancashire, went into gradual decline until bankrupted during
3096-453: The crosswall divided the blowing room from the rest, as it was here that there was greatest risk of fire. Mills became wider, Houldsworth Mill, Reddish (1865) was 35 m wide and accommodated 1200 spindle mules. It was of four storeys and had sixteen bays on each side of a central engine house; a double mill . The central block provided offices and warehousing. A mill had a range of ancillary buildings. Stair columns often extending above
3182-550: The designs of the Oldham architects . The only new mills were very large to benefit from the economies of scale. Older mills were re-equipped with rings, and machines were powered by individual electric motors. Mills of this period were large, their decoration was lavish reflecting Edwardian taste and prosperity. Most mills were built for mules. Kent Mill Chadderton (1908) was a five-storey, 11 bay mill, 84.6m x 43.9m. It had 90,000 spindles. Ring frames were smaller and heavier than mules so
3268-512: The early mills some of which were in isolated areas. In Lancashire they were built on the rivers and streams descending from the Pennines and Rossendale moorland . In some places quite small streams powered a string of small mills such as in the Cheesden Valley between Ramsbottom and Heywood . where 14 mills and their associated leats and ponds were concentrated along a four-mile stretch of
3354-542: The east end (1895); a two-story addition (1914), a one-story addition (1960s); pre-1926 "cotton sheds"; and a small two-story brick office (1966). Associated with the mill is the contributing detached chimney stack. The mill was built by Samuel C. Vann, whose son Aldridge built the Aldridge H. Vann House . The mill closed in 1991. It was listed on the National Register of Historic Places in 1996. The Sterling Cotton Mill
3440-499: The economy of Manchester, whose importance had previously been as a centre of pre-industrial spinning and weaving based on the domestic system. Manchester had no cotton mills until the opening of Arkwright's Shudehill Mill in 1783 and in 1789 Peter Drinkwater opened the Piccadilly Mill – the town's first mill to be directly powered by steam – and by 1800 Manchester had 42 mills, having eclipsed all rival textile centres to become
3526-649: The end of the 18th century there were about 900 cotton mills in Britain, of which approximately 300 were large Arkwright-type factories employing 300 to 400 workers, the rest, smaller mills using jennies or mules , were hand- or horse-driven and employed as few as 10 workers. Before 1780, only water power was available to drive large mills, but they were dependent on a constant flow of water and built in rural locations, causing problems of labour supply, transportation of materials and access to urban merchants for large mill-owners. Steam engines had been used to pump water since
Sterling Cotton Mill - Misplaced Pages Continue
3612-674: The facility in 1787, finishing the factory's equipment in 1788. Experience from this factory led Moses Brown of Providence to request the assistance of a person skilled in water-powered spinning. Samuel Slater , an immigrant and trained textile worker from England, accepted Brown's proposal, and assisted with the design and construction of Slater Mill , built in 1790 on the Blackstone River in Pawtucket, Rhode Island . Slater evaded restrictions on emigration put in place to allow England to maintain its monopoly on cotton mills. Slater Mill resembled
3698-516: The fundamental cause of the depression was a change in demand for cotton goods. J. M. Keynes suggested that there was over capacity, and the industry should be reorganised into larger units that would scrap the excess capacity. The Lancashire Cotton Corporation was a company set up by the Bank of England in 1929, to rescue the Lancashire spinning industry by means of consolidation. In merged 105 companies, ending up in 1950 with 53 operating mills. These were
3784-405: The fustian masters were middle men, who collected the grey cloth and took it to market in Manchester where it was sold to merchants who organised the finishing. To hand weave a 12-pound (5.4 kg) piece of eighteenpenny weft took 14 days and paid 36 shillings in all. Of this nine shillings was paid for spinning, and nine for carding. So by 1750, a rudimentary manufacturing system feeding into
3870-427: The handloom weaver spent part of each day visiting neighbours buying any weft they had. Carding and spinning might be the only income for that household, or part of it. The family might farm a few acres and card, spin and weave wool and cotton. It took three carders to provide the roving for one spinner, and up to three spinners to provide the yarn for one weaver. The process was continuous, and done by both sexes, from
3956-558: The heart of the cotton manufacturing trade. Water continued to be used to drive rural mills but mills, driven by steam, were built in towns alongside streams or canals to provide water for the engine. Murrays' Mills alongside the Rochdale Canal , in Ancoats were powered by 40 hp Boulton and Watt beam engines . Some were built as room and power mills, which let space to entrepreneurs. The mills, often 'L' or U-shaped, were narrow and multi-storeyed. The engine house, warehousing and
4042-408: The height of the mill. The engine needed more space and the engine house, boiler house and economiser were external to the main mill. Mills continued to get bigger, and were sometimes paired; two mills being driven by one engine. Another change was the trend of having carding on one floor. To achieve this, the ground floor was extended outwards behind the mill often a full mill width. In a single mill,
4128-485: The invention of the atmospheric engine by Thomas Newcomen in 1712 and, starting with the engine installed at Arkwright's Haarlem Mill in Wirksworth , Derbyshire in 1780, were used to supplement the supply of water to the water wheels of cotton mills. In 1781 James Watt registered a patent for the first rotative steam engine designed to "give motion to the wheels of mills or other machines". Concerns remained over
4214-580: The jenny was not very strong until Richard Arkwright invented the water-powered water frame . The spinning jenny helped to start the factory system of cotton manufacturing. The spinning jenny was invented by James Hargreaves . He was born in Oswaldtwistle , near Blackburn , around 1720. Blackburn was a town with a population of about 5,000, known for the production of "Blackburn greys," cloths of linen warp and cotton weft initially imported from India. They were usually sent to London to be printed. At
4300-544: The large spinning community in Blackburn. Eventually they broke into his house and smashed his machines, forcing him to flee to Nottingham in 1768. This was a centre for the hosiery industry, and knitted silks, cottons and wool. There he set up shop producing jennies in secret for one Mr Shipley, with the assistance of a joiner named Thomas James. He and James set up a textile business in Mill Street. On 12 July 1770, he took out
4386-565: The later larger mills. It was bought up by Courtaulds in August 1964. The later mills were on the fringe of the spinning area in Wigan and Stockport, Availability of labour was cited as a reason. The last mills were completed in 1927, these were Holden Mill (Astley Bridge Mill) and Elk Mill. In 1929, for the first time there were more spindles in the USA than in the UK. In 1972, India had greater spindleage than
SECTION 50
#17330855072524472-430: The mill and housed a water tank for the sprinkler system. The floors were higher allowing for taller windows. Accrington brick was used from 1890, decorated with yellow sandstone with moulded brick and terracotta features. Etched and stained glass was used in the offices. Mills were designed by specialist architects and architectural quality became a major consideration. The power needed and provided to drive these mills
4558-399: The mills were narrower with fewer storeys. Pear Mill Bredbury (1912) was planned to be a 210,000 spindle double mill. Only the first mill was completed, it had 137,000 spindles. They had more stair columns than earlier mills, it had dust flues often built into the rope race. There were two or three windows per bay. Decoration was often in terracotta and the mill name displayed in white brick on
4644-576: The office were inside the mill, although stair towers were external. Windows were square and smaller than in later mills. The walls were of unadorned rough brick. Construction was sometimes to fireproof designs. The mills are distinguished from warehouses in that warehouses had taking-in doors on each storey with an external hoist beam. Only the larger mills have survived. Mills of this period were from 25 to 68 m long and 11.5 m to 14 m wide. They could be eight stories high and had basements and attics. Floor height varied from 3.3 to 2.75 m on
4730-607: The postwar years, Japan, other Asian countries and ultimately China became dominant in cotton manufacturing. In the mid-16th century Manchester was an important manufacturing centre for wool and Leigh and south towards Manchester, used flax and raw cotton imported along the Mersey and Irwell Navigation . During the Industrial Revolution cotton manufacture changed from a domestic to a mechanised industry, made possible by inventions and advances in technology. The weaving process
4816-575: The same year there were 7,975,000 open end spinning rotors installed, with 44% of these being within Asia or Oceania and 29% within Eastern Europe . The average age of installed rotors is much lower than that of spindles and as rotors are between 7 and 10 times more productive they are responsible for 20% of the cotton spun worldwide. Modern cotton mills are increasingly automated. One large mill in Virginia in
4902-462: The smoothness of the power supplied by a steam engine to cotton mills, where the regularity of the yarn produced was dependent on the regularity of the power supply, and it was not until 1785 at Papplewick , in Robinson's Mill near Nottingham that a steam engine was successfully used to drive a cotton mill directly. Boulton and Watt 's engines enabled mills to be built in urban contexts and transformed
4988-400: The spindle now pointed upright. Hargreaves realised there was no particular reason the spindles had to be horizontal, as they always had been, and he could place them vertically in a row. The name is variously said to derive from this tale. The Registers of Church Kirk show that Hargreaves had several daughters, but none named Jenny (neither was his wife). A more likely explanation of the name
5074-505: The spinning process in the early factories was instrumental in the growth of the machine tool industry, enabling the construction of larger cotton mills. Limited companies were developed to construct mills, and together with the business of the trading floors of the cotton exchange in Manchester , a vast commercial city developed. Mills generated employment demand, drawing workers from largely rural areas and expanding urban populations. They provided incomes for girls and women. Child labour
5160-495: The stair tower or chimney. Stott and Sons employed Byzantine styling in Broadstone Mill, Reddish. Specialist architects built new mills and then created extensions. The last steam-powered mill, Elk Mill, was built by Arthur Turner Mules were built with 1300 spindles, but were gradually replaced by rings. The increasingly powerful engines required more boilers with economisers and superheaters. Mills needed reservoirs to supply
5246-422: The time, cotton yarn production could not keep up with demand of the textile industry, and Hargreaves spent some time considering how to improve the process. The flying shuttle ( John Kay 1733) had increased yarn demand by the weavers by doubling their productivity, and now the spinning jenny could supply that demand by increasing the spinners' productivity even more. The machine produced coarse thread. The idea
SECTION 60
#17330855072525332-574: The upper stories. Boilers were of the wagon type; chimneys were square or rectangular, attached to the mill, and in some cases part of the stair column. The steam engines were typically low-pressure single-cylinder condensing beam engines. The average power in 1835 was 48 hp. Power was transmitted by a main vertical shaft with bevel gears to the horizontal shafts. The later mills had gas lighting using gas produced on site. The mules with 250–350 spindles were placed transversely to get as much light as possible. The development of mills to mechanise
5418-667: The use of larger machinery and made it possible to concentrate production into organised factories . Four mills were set up to house Paul and Wyatt's machinery in the decade following its patent in 1738: the short-lived, animal-powered Upper Priory Cotton Mill in Birmingham in 1741; Marvel's Mill in Northampton operated from 1742 until 1764 and was the first to be powered by a water wheel ; Pinsley Mill in Leominster probably opened in 1744 and operated until it burned down in 1754; and
5504-537: The woollen manufacturers claimed this was taking jobs from workers in Coventry . Another law was passed, to fine anyone caught wearing printed or stained calico; muslins, neckcloths and fustians were exempted. It was this exemption that the Lancashire manufacturers exploited. The use of coloured cotton weft, with linen warp was permitted in the 1736 Manchester Act. There now was an artificial demand for woven cloth. In 1764, 3,870,392 pounds (1,755,580 kg) of cotton-wool
5590-475: The youngest to the oldest. The weaver would go once a week to the market with his wares and offer them for sale. A change came about 1740 when fustian masters gave out raw cotton and warps to the weavers and returned to collect the finished cloth ( Putting-out system ). The weaver organised the carding, spinning and weaving to the master's specification. The master then dyed or printed the grey cloth, and took it to shopkeepers. Ten years later this had changed and
5676-414: Was a 28-bay mill, 6 storeys of 16 m by 92 m. Each self-acting spinning mule had 500 spindles. Single-storey north light weaving sheds were sometimes added to the mills. The looms caused vibrations that damaged the structure of multi-storey buildings, and specialised weaving mills became common. They were single-storey sheds with an engine house and offices, and preparation and warehousing in
5762-459: Was a severe slump in 1908, which endured until 1918, but the years 1919 and 1920 were more profitable than the peak year of 1907 had been. Production peaked in 1912. The war of 1914–1918 put the Lancashire industry into reverse. The British government, starved of raw cotton, established mills in south Asia exporting the spinning technology – which was copied, and became a low-labour cost competitor. In Germany, Flanders and Brazil, mills were built to
5848-432: Was adopted and the pressure was on to speed up carding and spinning. The shortage of spinning capacity to feed the more efficient looms provided the motivation to develop more productive spinning techniques such as the spinning jenny, and triggered the start of the Industrial Revolution . Hargreaves kept the machine secret for some time, but produced a number for his own growing industry. The price of yarn fell, angering
5934-499: Was being used by "numbers of adventurers residing in the different counties of Derby, Leicester, Nottingham, Worcester, Stafford, York, Hertford and Lancashire" and by 1788 there were 143 Arkwright-type mills nationwide. The early mills were of light construction, narrow – about 9 feet (2.7 m) wide – and low in height, with ceiling heights of only 6–8 ft. The mills were powered by water wheels and lit by daylight. Mills were made by millwrights , builders and iron founders . By
6020-562: Was built on the Howe Bridge mills site and was named Unit One. It was not an open end mill but a combed cotton ring mill. Modern spinning mills are mainly built around open end spinning techniques using rotors or ring spinning techniques using spindles. In 2009 there were 202,979,000 ring spinning spindles installed worldwide, with 82% of these being in Asia or Oceania and 44% being within China . In
6106-429: Was constructed, containing 70,200 spindles and 1,300 looms. The town was named Ware Shoals . Between 1904 and 1916, the population of Ware Shoals grew from 2 men employed to maintain the newly constructed power plant, to 2,000. By the 1960s the mill employed 5,000 people. It closed in 1985, due to a surge of textile imports that caused a steep decline in the company's output and earnings. Though business revived in 1919,
6192-402: Was developed by Hargreaves as a metal frame with eight wooden spindles at one end. A set of eight rovings was attached to a beam on that frame. The rovings when extended passed through two horizontal bars of wood that could be clasped together. These bars could be drawn along the top of the frame by the spinner's left hand thus extending the thread. The spinner used his right hand to rapidly turn
6278-606: Was duplicated at Lowell, Massachusetts and several other new cities throughout the state. Mill girls, some as young as ten, were paid less than men, but received a fixed wage for their 73-hour week. They lived in company-owned boarding houses, and attended churches supported by the companies. In the 1840s George Henry Corliss of Providence, Rhode Island improved the reliability of stationary steam engines . He replaced slide valves with valves that used cams. These Corliss valves were more efficient and more reliable than their predecessors. Initially, steam engines pumped water into
6364-515: Was imported. In England, before canals , railways , and before the turnpikes , the only way to transport goods such as calicos, broadcloth or cotton-wool was by packhorse . Strings of packhorses travelled along a network of bridle paths . A merchant would be away from home most of the year, carrying his takings in cash in his saddlebag. Later a series of chapmen would work for the merchant, taking wares to wholesalers and clients in other towns, and with them would go sample books . Before 1720,
6450-612: Was increasing. Beam engines were installed until the 1870s when horizontal engines took over. Abbey Mill Oldham (1876) needed 700 hp, Nile Mill (1896) needed 2500 hp. By the 1890, boilers produced 160 psi, and the triple expansion horizontals became standard. Chimneys were octagonal. Following the American Civil War , cotton mills were built in the southern states of South Carolina , Alabama , and Mississippi . These mills grew larger as cheap labour and plentiful water power made operations profitable, which meant that
6536-414: Was learned he had sold several in the past. The spinning jenny succeeded because it held more than one ball of yarn, making more yarn in a shorter time and reducing the overall cost. The spinning jenny would not have been such a success if the flying shuttle had not been invented and installed in textile factories. Its success was limited in that it required the rovings to be prepared on a wheel, and this
6622-586: Was limited by the need to card by hand. It continued in common use in the cotton and fustian industry until about 1810. The spinning jenny was superseded by the spinning mule . The jenny was adapted for the process of slubbing , being the basis of the Slubbing Billy. The most common story told about the invention of the device and the origin of the jenny in the machine's name is that one of his daughters (or his wife) named Jenny knocked over one of their own spinning wheels. The device kept working normally, with
6708-460: Was not a commercial success and closed in 1790. A second mill using Cartwright's machinery, opened in Manchester in 1790 but was burned to the ground by hand loom weavers within two years. By 1803 there were only 2,400 power looms operating in Britain. In the United States, the early horse-powered Beverly Cotton Manufactory was designed by Thomas Somers , who started construction and testing of
6794-565: Was not applied to it until 1792. Many mills were built after Arkwright's patent expired in 1783 and, by 1788, there were about 210 mills in Great Britain. The development of cotton mills was linked to the development of the machinery they contained. By 1774, 30,000 people in Manchester were employed using the domestic system in cotton manufacture. Handloom weaving lingered into the mid-19th century but cotton spinning in mills relying on water power and subsequently steam power using fuel from
6880-463: Was passed to prevent the importation of dyed or printed calicoes from India, China or Persia. This caused grey cloth (calico that had not been finished – dyed or printed) to be imported instead, and these were printed in southern England with popular patterns. Lancashire businessmen produced grey cloth with linen warp and cotton weft, which they sent to London to be finished. Cotton-wool imports recovered and by 1720 were almost back to 1701 levels. Again
6966-482: Was similar to that of Lewis Paul , John Wyatt , James Hargreaves and Thomas Highs , Arkwright's powers of organisation, business acumen and ambition established the cotton mill as a successful business model and revolutionary example of the factory system . Arkwright's first mill – powered by horses in Nottingham in 1768 – was similar to Paul and Wyatt's first Birmingham mill although by 1772 it had expanded to four storeys and employed 300 workers. In 1771, while
7052-501: Was the first to be mechanised by the invention of John Kay 's flying shuttle in 1733. The manually-operated spinning jenny was developed by James Hargreaves in about 1764, and speeded up the spinning process. The roller spinning principle of Paul and Bourne became the basis of Richard Arkwright 's spinning frame and water frame , patented in 1769. The principles of the spinning jenny and water frame were combined by Samuel Crompton in his spinning mule of 1779, but water power
7138-465: Was tiny: in 1701 only 1,985,868 pounds (900,775 kg) of cotton-wool was imported into England, and by 1730 this had fallen to 1,545,472 pounds (701,014 kg). This was due to commercial legislation ( Calico Acts ) to protect the woollen industry. Cheap calico prints, imported by the East India Company from Hindustan (as India was then called), became popular. In 1700 an Act of Parliament
7224-537: Was unsuccessful in enabling one worker to operate more than a single loom. The first feasible power loom was patented by Edmund Cartwright in 1785, although it was initially a primitive device it established the basic principle that would be used in powered weaving until the 20th century. In 1788 Cartwright opened Revolution Mill in Doncaster which was powered by a Boulton and Watt steam engine and had 108 power looms on three floors as well as spinning machinery, but it
7310-522: Was used in the mills, and the factory system led to organised labour . Poor conditions became the subject of exposés . In England, the Factory Acts were written to regulate them. The cotton mill, originally a Lancashire phenomenon, was copied in New England and New York, and later in the southern states of America. In the 20th century, North West England lost its supremacy to the United States. In
7396-577: Was £32,012,380. 1860 saw the end of this period of rapid growth. The Cotton Famine of 1861–1865 was a period when American long staple cotton became unavailable due to an American Civil War . After the war, the economics of the industry had changed, and a new larger mill was required. In 1814 the Boston Manufacturing Company of New England established a "fully integrated" mill on the Charles River at Waltham, Massachusetts . Despite
#251748