Misplaced Pages

Ellis Group

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

The Ellis Group is a stratigraphical unit of Bajocian - Oxfordian age in Alberta , Saskatchewan , Montana and Wyoming in the Western Canadian Sedimentary Basin . It takes the name from Fort Ellis , Montana , and was first described in outcrop in the Rocky Creek Canyon by A.C. Peale in 1893.

#598401

54-601: The Ellis Group is composed of shale and sandstones deposited in a marine and transitional environment. Oil is produced from the Sawtooth Formation in southeastern Alberta . The Ellis Group laterally occurs in the subsurface in southern Alberta and northern and central Montana . It is typically 80 metres (260 ft), but thickens on either side of the Sweetgrass Arch and reaches up to 150 metres (490 ft) in southeastern Alberta. The Ellis Group includes

108-407: A glass with no true melting point, can be used as a glass fibre for fibreglass. Silicon dioxide is mostly obtained by mining, including sand mining and purification of quartz . Quartz is suitable for many purposes, while chemical processing is required to make a purer or otherwise more suitable (e.g. more reactive or fine-grained) product. Precipitated silica or amorphous silica is produced by

162-414: A hard, fissile, metamorphic rock known as slate . With continued increase in metamorphic grade the sequence is phyllite , then schist and finally gneiss . Shale is the most common source rock for hydrocarbons ( natural gas and petroleum ). The lack of coarse sediments in most shale beds reflects the absence of strong currents in the waters of the depositional basin. These might have oxygenated

216-494: A heat capacity minimum. Its density decreases from 2.08 g/cm at 1950 °C to 2.03 g/cm at 2200 °C. The molecular SiO 2 has a linear structure like CO 2 . It has been produced by combining silicon monoxide (SiO) with oxygen in an argon matrix. The dimeric silicon dioxide, (SiO 2 ) 2 has been obtained by reacting O 2 with matrix isolated dimeric silicon monoxide, (Si 2 O 2 ). In dimeric silicon dioxide there are two oxygen atoms bridging between

270-450: A low value of 140° in α-tridymite, up to 180° in β-tridymite. In α-quartz, the Si–O–Si angle is 144°. Alpha quartz is the most stable form of solid SiO 2 at room temperature. The high-temperature minerals, cristobalite and tridymite, have both lower densities and indices of refraction than quartz. The transformation from α-quartz to beta-quartz takes place abruptly at 573 °C. Since

324-410: A silicon wafer enables it to overcome the surface states that otherwise prevent electricity from reaching the semiconducting layer. The process of silicon surface passivation by thermal oxidation (silicon dioxide) is critical to the semiconductor industry . It is commonly used to manufacture metal–oxide–semiconductor field-effect transistors (MOSFETs) and silicon integrated circuit chips (with

378-477: A very shallow layer of about 1 nm or 10 Å of so-called native oxide. Higher temperatures and alternative environments are used to grow well-controlled layers of silicon dioxide on silicon, for example at temperatures between 600 and 1200 °C, using so-called dry oxidation with O 2 or wet oxidation with H 2 O. The native oxide layer is beneficial in microelectronics , where it acts as electric insulator with high chemical stability. It can protect

432-524: A white powder with extremely low bulk density (0.03-0.15 g/cm ) and thus high surface area. The particles act as a thixotropic thickening agent, or as an anti-caking agent, and can be treated to make them hydrophilic or hydrophobic for either water or organic liquid applications. Silica fume is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production. It consists of amorphous (non-crystalline) spherical particles with an average particle diameter of 150 nm, without

486-435: Is a common fundamental constituent of glass . In the majority of silicon dioxides, the silicon atom shows tetrahedral coordination , with four oxygen atoms surrounding a central Si atom ( see 3-D Unit Cell ). Thus, SiO 2 forms 3-dimensional network solids in which each silicon atom is covalently bonded in a tetrahedral manner to 4 oxygen atoms. In contrast, CO 2 is a linear molecule. The starkly different structures of

540-446: Is a mix of flakes of clay minerals (hydrous aluminium phyllosilicates, e.g., kaolin , Al 2 Si 2 O 5 ( OH ) 4 ) and tiny fragments ( silt -sized particles) of other minerals, especially quartz and calcite . Shale is characterized by its tendency to split into thin layers ( laminae ) less than one centimeter in thickness. This property is called fissility . Shale is the most common sedimentary rock. The term shale

594-1201: Is accompanied by telogenesis , the third and final stage of diagenesis. As erosion reduces the depth of burial, renewed exposure to meteoric water produces additional changes to the shale, such as dissolution of some of the cement to produce secondary porosity . Pyrite may be oxidized to produce gypsum . Black shales are dark, as a result of being especially rich in unoxidized carbon . Common in some Paleozoic and Mesozoic strata , black shales were deposited in anoxic , reducing environments, such as in stagnant water columns. Some black shales contain abundant heavy metals such as molybdenum , uranium , vanadium , and zinc . The enriched values are of controversial origin, having been alternatively attributed to input from hydrothermal fluids during or after sedimentation or to slow accumulation from sea water over long periods of sedimentation. Fossils , animal tracks or burrows and even raindrop impressions are sometimes preserved on shale bedding surfaces. Shales may also contain concretions consisting of pyrite, apatite , or various carbonate minerals. Shales that are subject to heat and pressure of metamorphism alter into

SECTION 10

#1732873249599

648-439: Is also the primary component of rice husk ash , which is used, for example, in filtration and as supplementary cementitious material (SCM) in cement and concrete manufacturing. Silicification in and by cells has been common in the biological world and it occurs in bacteria, protists, plants, and animals (invertebrates and vertebrates). Prominent examples include: About 95% of the commercial use of silicon dioxide (sand)

702-638: Is composed of about 58% clay minerals, 28% quartz, 6% feldspar , 5% carbonate minerals, and 2% iron oxides . Most of the quartz is detrital (part of the original sediments that formed the shale) rather than authigenic (crystallized within the shale after deposition). Shales and other mudrocks contain roughly 95 percent of the organic matter in all sedimentary rocks. However, this amounts to less than one percent by mass in an average shale. Black shales, which form in anoxic conditions, contain reduced free carbon along with ferrous iron (Fe ) and sulfur (S ). Amorphous iron sulfide , along with carbon, produce

756-430: Is evidence that shale acts as a semipermeable medium, allowing water to pass through while retaining dissolved salts. The fine particles that compose shale can remain suspended in water long after the larger particles of sand have been deposited. As a result, shales are typically deposited in very slow moving water and are often found in lakes and lagoonal deposits, in river deltas , on floodplains and offshore below

810-465: Is in the construction industry, e.g. in the production of concrete ( Portland cement concrete ). Certain deposits of silica sand, with desirable particle size and shape and desirable clay and other mineral content, were important for sand casting of metallic products. The high melting point of silica enables it to be used in such applications such as iron casting; modern sand casting sometimes uses other minerals for other reasons. Crystalline silica

864-455: Is more likely to form nonfissile mudstone than shale. On the other hand, black shales often have very pronounced fissility ( paper shales ) due to binding of hydrocarbon molecules to the faces of the clay particles, which weakens the binding between particles. Lithification follows closely on compaction, as increased temperatures at depth hasten deposition of cement that binds the grains together. Pressure solution contributes to cementing, as

918-651: Is obtained by the dealumination of a low-sodium, ultra-stable Y zeolite with combined acid and thermal treatment. The resulting product contains over 99% silica, and has high crystallinity and specific surface area (over 800 m /g). Faujasite-silica has very high thermal and acid stability. For example, it maintains a high degree of long-range molecular order or crystallinity even after boiling in concentrated hydrochloric acid . Molten silica exhibits several peculiar physical characteristics that are similar to those observed in liquid water : negative temperature expansion, density maximum at temperatures ~5000 °C, and

972-421: Is rapidly cooled, it does not crystallize, but solidifies as a glass. Because of this, most ceramic glazes have silica as the main ingredient. The structural geometry of silicon and oxygen in glass is similar to that in quartz and most other crystalline forms of silicon and oxygen, with silicon surrounded by regular tetrahedra of oxygen centres. The difference between the glass and crystalline forms arises from

1026-452: Is reduced. In addition to this physical compaction, chemical compaction may take place via pressure solution . Points of contact between grains are under the greatest strain, and the strained mineral is more soluble than the rest of the grain. As a result, the contact points are dissolved away, allowing the grains to come into closer contact. It is during compaction that shale develops its fissility, likely through mechanical compaction of

1080-839: Is sometimes applied more broadly, as essentially a synonym for mudrock , rather than in the narrower sense of clay-rich fissile mudrock. Shale typically exhibits varying degrees of fissility. Because of the parallel orientation of clay mineral flakes in shale, it breaks into thin layers, often splintery and usually parallel to the otherwise indistinguishable bedding planes . Non-fissile rocks of similar composition and particle size (less than 0.0625 mm) are described as mudstones (1/3 to 2/3 silt particles) or claystones (less than 1/3 silt). Rocks with similar particle sizes but with less clay (greater than 2/3 silt) and therefore grittier are siltstones . Shales are typically gray in color and are composed of clay minerals and quartz grains. The addition of variable amounts of minor constituents alters

1134-426: Is the major constituent of sand . Even though it is poorly soluble, silica occurs in many plants such as rice . Plant materials with high silica phytolith content appear to be of importance to grazing animals, from chewing insects to ungulates . Silica accelerates tooth wear, and high levels of silica in plants frequently eaten by herbivores may have developed as a defense mechanism against predation. Silica

SECTION 20

#1732873249599

1188-453: Is the only polymorph of silica stable at the Earth's surface. Metastable occurrences of the high-pressure forms coesite and stishovite have been found around impact structures and associated with eclogites formed during ultra-high-pressure metamorphism . The high-temperature forms of tridymite and cristobalite are known from silica-rich volcanic rocks . In many parts of the world, silica

1242-504: Is the process by which a semiconductor surface is rendered inert, and does not change semiconductor properties as a result of interaction with air or other materials in contact with the surface or edge of the crystal. The formation of a thermally grown silicon dioxide layer greatly reduces the concentration of electronic states at the silicon surface . SiO 2 films preserve the electrical characteristics of p–n junctions and prevent these electrical characteristics from deteriorating by

1296-436: Is used as a fining agent for wine, beer, and juice, with the E number reference E551 . In cosmetics, silica is useful for its light-diffusing properties and natural absorbency. Diatomaceous earth , a mined product, has been used in food and cosmetics for centuries. It consists of the silica shells of microscopic diatoms ; in a less processed form it was sold as "tooth powder". Manufactured or mined hydrated silica

1350-489: Is used as the hard abrasive in toothpaste . Silicon dioxide is widely used in the semiconductor technology: Because silicon dioxide is a native oxide of silicon it is more widely used compared to other semiconductors like gallium arsenide or indium phosphide . Silicon dioxide could be grown on a silicon semiconductor surface. Silicon oxide layers could protect silicon surfaces during diffusion processes , and could be used for diffusion masking. Surface passivation

1404-418: Is used in hydraulic fracturing of formations which contain tight oil and shale gas . Silica is the primary ingredient in the production of most glass . As other minerals are melted with silica, the principle of freezing point depression lowers the melting point of the mixture and increases fluidity. The glass transition temperature of pure SiO 2 is about 1475 K. When molten silicon dioxide SiO 2

1458-538: Is used to produce elemental silicon . The process involves carbothermic reduction in an electric arc furnace : Fumed silica , also known as pyrogenic silica, is prepared by burning SiCl 4 in an oxygen-rich hydrogen flame to produce a "smoke" of SiO 2 . It can also be produced by vaporizing quartz sand in a 3000 °C electric arc. Both processes result in microscopic droplets of amorphous silica fused into branched, chainlike, three-dimensional secondary particles which then agglomerate into tertiary particles,

1512-399: The U.S. Gulf Coast . As sediments continue to accumulate, the older, more deeply buried sediments begin to undergo diagenesis . This mostly consists of compaction and lithification of the clay and silt particles. Early stages of diagenesis, described as eogenesis , take place at shallow depths (a few tens of meters) and are characterized by bioturbation and mineralogical changes in

1566-550: The planar process ). Hydrophobic silica is used as a defoamer component . In its capacity as a refractory , it is useful in fiber form as a high-temperature thermal protection fabric. Silica is used in the extraction of DNA and RNA due to its ability to bind to the nucleic acids under the presence of chaotropes . Silica aerogel was used in the Stardust spacecraft to collect extraterrestrial particles. Pure silica (silicon dioxide), when cooled as fused quartz into

1620-651: The wave base . Thick deposits of shale are found near ancient continental margins and foreland basins . Some of the most widespread shale formations were deposited by epicontinental seas . Black shales are common in Cretaceous strata on the margins of the Atlantic Ocean , where they were deposited in fault -bounded silled basins associated with the opening of the Atlantic during the breakup of Pangaea . These basins were anoxic, in part because of restricted circulation in

1674-496: The acidification of solutions of sodium silicate . The gelatinous precipitate or silica gel , is first washed and then dehydrated to produce colorless microporous silica. The idealized equation involving a trisilicate and sulfuric acid is: Approximately one billion kilograms/year (1999) of silica were produced in this manner, mainly for use for polymer composites – tires and shoe soles. Thin films of silica grow spontaneously on silicon wafers via thermal oxidation , producing

Ellis Group - Misplaced Pages Continue

1728-421: The black coloration. Because amorphous iron sulfide gradually converts to pyrite , which is not an important pigment, young shales may be quite dark from their iron sulfide content, in spite of a modest carbon content (less than 1%), while a black color in an ancient shale indicates a high carbon content. Most shales are marine in origin, and the groundwater in shale formations is often highly saline . There

1782-552: The branching of the pyrogenic product. The main use is as pozzolanic material for high performance concrete. Fumed silica nanoparticles can be successfully used as an anti-aging agent in asphalt binders. Silica, either colloidal, precipitated, or pyrogenic fumed, is a common additive in food production. It is used primarily as a flow or anti- caking agent in powdered foods such as spices and non-dairy coffee creamer, or powders to be formed into pharmaceutical tablets. It can adsorb water in hygroscopic applications. Colloidal silica

1836-506: The clumps of clay particles produced by flocculation vary in size from a few tens of microns to over 700 microns in diameter. The floccules start out water-rich, but much of the water is expelled from the floccules as the clay minerals bind more tightly together over time (a process called syneresis ). Clay pelletization by organisms that filter feed is important where flocculation is inhibited. Filter feeders produce an estimated 12 metric tons of clay pellets per square kilometer per year along

1890-408: The color of the rock. Red, brown and green colors are indicative of ferric oxide ( hematite – reds), iron hydroxide ( goethite – browns and limonite – yellow), or micaceous minerals ( chlorite , biotite and illite – greens). The color shifts from reddish to greenish as iron in the oxidized ( ferric ) state is converted to iron in the reduced ( ferrous ) state. Black shale results from

1944-506: The connectivity of the tetrahedral units: Although there is no long-range periodicity in the glassy network, ordering remains at length scales well beyond the SiO bond length. One example of this ordering is the preference to form rings of 6-tetrahedra. The majority of optical fibers for telecommunications are also made from silica. It is a primary raw material for many ceramics such as earthenware , stoneware , and porcelain . Silicon dioxide

1998-429: The context of underground coal mining , shale was frequently referred to as slate well into the 20th century. Black shale associated with coal seams is called black metal. [REDACTED] Media related to Shale at Wikimedia Commons Silica Silicon dioxide , also known as silica , is an oxide of silicon with the chemical formula SiO 2 , commonly found in nature as quartz . In many parts of

2052-488: The densest of the low-pressure forms, which has a density of 2.648 g/cm . The difference in density can be ascribed to the increase in coordination as the six shortest Si–O bond lengths in stishovite (four Si–O bond lengths of 176 pm and two others of 181 pm) are greater than the Si–O bond length (161 pm) in α-quartz. The change in the coordination increases the ionicity of the Si–O bond. Faujasite silica, another polymorph,

2106-459: The dioxides of carbon and silicon are a manifestation of the double bond rule . Based on the crystal structural differences, silicon dioxide can be divided into two categories: crystalline and non-crystalline (amorphous). In crystalline form, this substance can be found naturally occurring as quartz , tridymite (high-temperature form), cristobalite (high-temperature form), stishovite (high-pressure form), and coesite (high-pressure form). On

2160-670: The following formations, from top to bottom: The Ellis Group is unconformably overlain by the shales and sandstones of the Mannville Group and rests on the carbonates of the Rundle Group . It grades westwards to the shales of the Fernie Group , and eastwards to the shale, sandstones and limestones of the Vanguard and Shaunavon Formations . Shale Shale is a fine-grained, clastic sedimentary rock formed from mud that

2214-411: The gaseous ambient environment. Silicon oxide layers could be used to electrically stabilize silicon surfaces. The surface passivation process is an important method of semiconductor device fabrication that involves coating a silicon wafer with an insulating layer of silicon oxide so that electricity could reliably penetrate to the conducting silicon below. Growing a layer of silicon dioxide on top of

Ellis Group - Misplaced Pages Continue

2268-592: The mineral dissolved from strained contact points is redeposited in the unstrained pore spaces. The clay minerals may be altered as well. For example, smectite is altered to illite at temperatures of about 55 to 200 °C (130 to 390 °F), releasing water in the process. Other alteration reactions include the alteration of smectite to chlorite and of kaolinite to illite at temperatures between 120 and 150 °C (250 and 300 °F). Because of these reactions, illite composes 80% of Precambrian shales, versus about 25% of young shales. Unroofing of buried shale

2322-433: The narrow Atlantic, and in part because the very warm Cretaceous seas lacked the circulation of cold bottom water that oxygenates the deep oceans today. Most clay must be deposited as aggregates and floccules, since the settling rate of individual clay particles is extremely slow. Flocculation is very rapid once the clay encounters highly saline sea water. Whereas individual clay particles are less than 4 microns in size,

2376-415: The original open framework of clay particles. The particles become strongly oriented into parallel layers that give the shale its distinctive fabric. Fissility likely develops early in the compaction process, at relatively shallow depth, since fissility does not seem to vary with depth in thick formations. Kaolinite flakes have less tendency to align in parallel layers than other clays, so kaolinite-rich clay

2430-400: The other hand, amorphous silica can be found in nature as opal and diatomaceous earth . Quartz glass is a form of intermediate state between these structures. All of these distinct crystalline forms always have the same local structure around Si and O. In α-quartz the Si–O bond length is 161 pm, whereas in α-tridymite it is in the range 154–171 pm. The Si–O–Si angle also varies between

2484-817: The presence of greater than one percent carbonaceous material and indicates a reducing environment. Pale blue to blue-green shales typically are rich in carbonate minerals . Clays are the major constituent of shales and other mudrocks. The clay minerals represented are largely kaolinite , montmorillonite and illite. Clay minerals of Late Tertiary mudstones are expandable smectites , whereas in older rocks (especially in mid-to early Paleozoic shales) illites predominate. The transformation of smectite to illite produces silica , sodium , calcium , magnesium , iron and water. These released elements form authigenic quartz , chert , calcite , dolomite , ankerite , hematite and albite , all trace to minor (except quartz) minerals found in shales and other mudrocks. A typical shale

2538-444: The richest source rocks may contain as much as 40% organic matter. The organic matter in shale is converted over time from the original proteins, polysaccharides , lipids , and other organic molecules to kerogen , which at the higher temperatures found at greater depths of burial is further converted to graphite and petroleum. Before the mid-19th century, the terms slate , shale and schist were not sharply distinguished. In

2592-433: The sediments, with only slight compaction. Pyrite may be formed in anoxic mud at this stage of diagenesis. Deeper burial is accompanied by mesogenesis , during which most of the compaction and lithification takes place. As the sediments come under increasing pressure from overlying sediments, sediment grains move into more compact arrangements, ductile grains (such as clay mineral grains) are deformed, and pore space

2646-401: The silicon atoms with an Si–O–Si angle of 94° and bond length of 164.6 pm and the terminal Si–O bond length is 150.2 pm. The Si–O bond length is 148.3 pm, which compares with the length of 161 pm in α-quartz. The bond energy is estimated at 621.7 kJ/mol. SiO 2 is most commonly encountered in nature as quartz , which comprises more than 10% by mass of the Earth's crust. Quartz

2700-418: The silicon, store charge, block current, and even act as a controlled pathway to limit current flow. Many routes to silicon dioxide start with an organosilicon compound, e.g., HMDSO, TEOS. Synthesis of silica is illustrated below using tetraethyl orthosilicate (TEOS). Simply heating TEOS at 680–730 °C results in the oxide: Similarly TEOS combusts around 400 °C: TEOS undergoes hydrolysis via

2754-492: The so-called sol-gel process . The course of the reaction and nature of the product are affected by catalysts, but the idealized equation is: Being highly stable, silicon dioxide arises from many methods. Conceptually simple, but of little practical value, combustion of silane gives silicon dioxide. This reaction is analogous to the combustion of methane: However the chemical vapor deposition of silicon dioxide onto crystal surface from silane had been used using nitrogen as

SECTION 50

#1732873249599

2808-446: The transformation is accompanied by a significant change in volume, it can easily induce fracturing of ceramics or rocks passing through this temperature limit. The high-pressure minerals, seifertite , stishovite, and coesite, though, have higher densities and indices of refraction than quartz. Stishovite has a rutile -like structure where silicon is 6-coordinate. The density of stishovite is 4.287 g/cm , which compares to α-quartz,

2862-414: The waters and destroyed organic matter before it could accumulate. The absence of carbonate rock in shale beds reflects the absence of organisms that might have secreted carbonate skeletons, also likely due to an anoxic environment. As a result, about 95% of organic matter in sedimentary rocks is found in shales and other mudrocks. Individual shale beds typically have an organic matter content of about 1%, but

2916-482: The world, silica is the major constituent of sand . Silica is one of the most complex and abundant families of materials , existing as a compound of several minerals and as a synthetic product. Examples include fused quartz , fumed silica , opal , and aerogels . It is used in structural materials , microelectronics , and as components in the food and pharmaceutical industries. All forms are white or colorless, although impure samples can be colored. Silicon dioxide

#598401