Misplaced Pages

#566433

140-570: Since the Russian state is of such a vast size and nature that it includes many different seas, long and indented coastlines and a great number of islands, as well as a complex system of waterways and lakes, surveying has been an indispensable activity for the Russian Navy since its modernization at the time of Czar Peter the Great in the 17th century. The hydrographic service has been historically attached to

280-461: A binnacle . This preserves the horizontal position. The magnetic compass is very reliable at moderate latitudes, but in geographic regions near the Earth's magnetic poles it becomes unusable. As the compass is moved closer to one of the magnetic poles, the magnetic declination, the difference between the direction to geographical north and magnetic north, becomes greater and greater. At some point close to

420-470: A jewel bearing , so it can turn easily. When the compass is held level, the needle turns until, after a few seconds to allow oscillations to die out, it settles into its equilibrium orientation. In navigation, directions on maps are usually expressed with reference to geographical or true north , the direction toward the Geographical North Pole , the rotation axis of the Earth. Depending on where

560-495: A plane table in 1551, but it is thought that the instrument was in use earlier as his description is of a developed instrument. Gunter's chain was introduced in 1620 by English mathematician Edmund Gunter . It enabled plots of land to be accurately surveyed and plotted for legal and commercial purposes. Leonard Digges described a theodolite that measured horizontal angles in his book A geometric practice named Pantometria (1571). Joshua Habermel ( Erasmus Habermehl ) created

700-444: A GPS on large scale surveys make them popular for major infrastructure or data gathering projects. One-person robotic-guided total stations allow surveyors to measure without extra workers to aim the telescope or record data. A fast but expensive way to measure large areas is with a helicopter, using a GPS to record the location of the helicopter and a laser scanner to measure the ground. To increase precision, surveyors place beacons on

840-518: A bowl of water it becomes a compass. Such devices were universally used as compasses until the invention of the box-like compass with a "dry" pivoting needle, sometime around 1300. Originally, many compasses were marked only as to the direction of magnetic north, or to the four cardinal points (north, south, east, west). Later, these were divided, in China into 24, and in Europe into 32 equally spaced points around

980-405: A compass card, which moves freely on a pivot. A lubber line , which can be a marking on the compass bowl or a small fixed needle, indicates the ship's heading on the compass card. Traditionally the card is divided into thirty-two points (known as rhumbs ), although modern compasses are marked in degrees rather than cardinal points. The glass-covered box (or bowl) contains a suspended gimbal within

1120-413: A compass, for example, certain rocks which contain magnetic minerals, like Magnetite . This is often indicated by a rock with a surface which is dark and has a metallic luster, not all magnetic mineral bearing rocks have this indication. To see if a rock or an area is causing interference on a compass, get out of the area, and see if the needle on the compass moves. If it does, it means that the area or rock

1260-631: A device for divination as early as the Chinese Han dynasty (since c. 206 BC), and later adopted for navigation by the Song dynasty Chinese during the 11th century. The first usage of a compass recorded in Western Europe and the Islamic world occurred around 1190. The magnetic compass is the most familiar compass type. It functions as a pointer to " magnetic north ", the local magnetic meridian, because

1400-457: A different method. To take a map bearing or true bearing (a bearing taken in reference to true, not magnetic north) to a destination with a protractor compass , the edge of the compass is placed on the map so that it connects the current location with the desired destination (some sources recommend physically drawing a line). The orienting lines in the base of the compass dial are then rotated to align with actual or true north by aligning them with

1540-488: A few nations, notably the United States Army, continue to issue field compasses with magnetized compass dials or cards instead of needles. A magnetic card compass is usually equipped with an optical, lensatic, or prismatic sight , which allows the user to read the bearing or azimuth off the compass card while simultaneously aligning the compass with the objective (see photo). Magnetic card compass designs normally require

SECTION 10

#1733085606567

1680-590: A few shortcomings, his atlas of the Baltic Sea was republished in 1757, 1788, 1789 and 1795, serving Russian mariners for more than 50 years. In 1777 the Admiralty Board founded the Russian Hydrographic Service, implementing a plan that marked the beginning of systematic drawing of nautical charts. In 1799 a committee for the dissemination of marine sciences and the improvement of the drawing of charts

1820-477: A fixed base station and a second roving antenna. The position of the roving antenna can be tracked. The theodolite , total station and RTK GPS survey remain the primary methods in use. Remote sensing and satellite imagery continue to improve and become cheaper, allowing more commonplace use. Prominent new technologies include three-dimensional (3D) scanning and lidar -based topographical surveys. UAV technology along with photogrammetric image processing

1960-437: A fixed point while its heading is noted by alignment with fixed points on the shore. A compass deviation card is prepared so that the navigator can convert between compass and magnetic headings. The compass can be corrected in three ways. First the lubber line can be adjusted so that it is aligned with the direction in which the ship travels, then the effects of permanent magnets can be corrected for by small magnets fitted within

2100-399: A flexible rubber diaphragm or airspace inside the capsule to allow for volume changes caused by temperature or altitude, some modern liquid compasses use smaller housings and/or flexible capsule materials to accomplish the same result. The liquid inside the capsule serves to damp the movement of the needle, reducing oscillation time and increasing stability. Key points on the compass, including

2240-423: A great step forward in the instrument's accuracy. William Gascoigne invented an instrument that used a telescope with an installed crosshair as a target device, in 1640. James Watt developed an optical meter for the measuring of distance in 1771; it measured the parallactic angle from which the distance to a point could be deduced. Dutch mathematician Willebrord Snellius (a.k.a. Snel van Royen) introduced

2380-450: A height above sea level. As the surveying profession grew it created Cartesian coordinate systems to simplify the mathematics for surveys over small parts of the Earth. The simplest coordinate systems assume that the Earth is flat and measure from an arbitrary point, known as a 'datum' (singular form of data). The coordinate system allows easy calculation of the distances and direction between objects over small areas. Large areas distort due to

2520-433: A known size. It was sometimes used before to the invention of EDM where rough ground made chain measurement impractical. Historically, horizontal angles were measured by using a compass to provide a magnetic bearing or azimuth. Later, more precise scribed discs improved angular resolution. Mounting telescopes with reticles atop the disc allowed more precise sighting (see theodolite ). Levels and calibrated circles allowed

2660-573: A lodestone, which appeared in China by 1088 during the Song dynasty , as described by Shen Kuo . Dry compasses began to appear around 1300 in Medieval Europe and the Islamic world . This was supplanted in the early 20th century by the liquid-filled magnetic compass. Modern compasses usually use a magnetized needle or dial inside a capsule completely filled with a liquid (lamp oil, mineral oil, white spirits, purified kerosene, or ethyl alcohol are common). While older designs commonly incorporated

2800-434: A loop pattern or link between two prior reference marks so the surveyor can check their measurements. Many surveys do not calculate positions on the surface of the Earth, but instead, measure the relative positions of objects. However, often the surveyed items need to be compared to outside data, such as boundary lines or previous survey's objects. The oldest way of describing a position is via latitude and longitude, and often

2940-405: A low-friction surface to allow it to freely pivot to align itself with the magnetic field. It is then labeled so the user can distinguish the north-pointing from the south-pointing end; in modern convention the north end is typically marked in some way. If a needle is rubbed on a lodestone or other magnet, the needle becomes magnetized. When it is inserted in a cork or piece of wood, and placed in

SECTION 20

#1733085606567

3080-455: A map with the latest declination information should be used. Some magnetic compasses include means to manually compensate for the magnetic declination, so that the compass shows true directions. The first compasses in ancient Han dynasty China were made of lodestone , a naturally magnetized ore of iron. The wet compass reached Southern India in the 4th century AD. Later compasses were made of iron needles, magnetized by striking them with

3220-627: A map. Other features found on modern orienteering compasses are map and romer scales for measuring distances and plotting positions on maps, luminous markings on the face or bezels, various sighting mechanisms (mirror, prism, etc.) for taking bearings of distant objects with greater precision, gimbal-mounted, "global" needles for use in differing hemispheres, special rare-earth magnets to stabilize compass needles, adjustable declination for obtaining instant true bearings without resorting to arithmetic, and devices such as inclinometers for measuring gradients. The sport of orienteering has also resulted in

3360-434: A marked line of longitude (or the vertical margin of the map), ignoring the compass needle entirely. The resulting true bearing or map bearing may then be read at the degree indicator or direction-of-travel (DOT) line, which may be followed as an azimuth (course) to the destination. If a magnetic north bearing or compass bearing is desired, the compass must be adjusted by the amount of magnetic declination before using

3500-533: A microprocessor. Often, the device is a discrete component which outputs either a digital or analog signal proportional to its orientation. This signal is interpreted by a controller or microprocessor and either used internally, or sent to a display unit. The sensor uses highly calibrated internal electronics to measure the response of the device to the Earth's magnetic field. Apart from navigational compasses, other specialty compasses have also been designed to accommodate specific uses. These include: A magnetic rod

3640-618: A multi frequency phase shift of light waves to find a distance. These instruments eliminated the need for days or weeks of chain measurement by measuring between points kilometers apart in one go. Advances in electronics allowed miniaturization of EDM. In the 1970s the first instruments combining angle and distance measurement appeared, becoming known as total stations . Manufacturers added more equipment by degrees, bringing improvements in accuracy and speed of measurement. Major advances include tilt compensators, data recorders and on-board calculation programs. The first satellite positioning system

3780-419: A needle lock is fitted to the compass to reduce wear, operated by the folding action of the rear sight/lens holder. The use of air-filled induction compasses has declined over the years, as they may become inoperative or inaccurate in freezing temperatures or extremely humid environments due to condensation or water ingress. Some military compasses, like the U.S. M-1950 ( Cammenga 3H) military lensatic compass,

3920-410: A plan or map, and the points at the ends of the offset lines could be joined to show the feature. Traversing is a common method of surveying smaller areas. The surveyors start from an old reference mark or known position and place a network of reference marks covering the survey area. They then measure bearings and distances between the reference marks, and to the target features. Most traverses form

4060-406: A point inside a triangle using the angles cast between the vertices at the unknown point. These could be measured more accurately than bearings of the vertices, which depended on a compass. His work established the idea of surveying a primary network of control points, and locating subsidiary points inside the primary network later. Between 1733 and 1740, Jacques Cassini and his son César undertook

4200-472: A profession. They established the basic measurements under which the Roman Empire was divided, such as a tax register of conquered lands (300 AD). Roman surveyors were known as Gromatici . In medieval Europe, beating the bounds maintained the boundaries of a village or parish. This was the practice of gathering a group of residents and walking around the parish or village to establish a communal memory of

4340-596: A radical change in the navigational, hydrographic and hydrometeorological support of the Navy. During this period the need for innovative and detailed survey and mapping of the Earth's geophysics , including gravity and magnetic fields , became of the utmost importance for the Hydrographic Service of the Soviet Union. At that time, using its survey vessels, the department spearheaded a comprehensive study of large areas of

Russian Hydrographic Service - Misplaced Pages Continue

4480-428: A reflector or prism to return the light pulses used for distance measurements. They are fully robotic, and can even e-mail point data to a remote computer and connect to satellite positioning systems , such as Global Positioning System . Real Time Kinematic GPS systems have significantly increased the speed of surveying, and they are now horizontally accurate to within 1 cm ± 1 ppm in real-time, while vertically it

4620-403: A separate magnetized needle inside a rotating capsule, an orienting "box" or gate for aligning the needle with magnetic north, a transparent base containing map orienting lines, and a bezel (outer dial) marked in degrees or other units of angular measurement. The capsule is mounted in a transparent baseplate containing a direction-of-travel (DOT) indicator for use in taking bearings directly from

4760-469: A separate protractor tool in order to take bearings directly from a map. The U.S. M-1950 military lensatic compass does not use a liquid-filled capsule as a damping mechanism, but rather electromagnetic induction to control oscillation of its magnetized card. A "deep-well" design is used to allow the compass to be used globally with a card tilt of up to 8 degrees without impairing accuracy. As induction forces provide less damping than fluid-filled designs,

4900-753: A small sliding counterweight installed on the needle. This sliding counterweight, called a "rider", can be used for counterbalancing the needle against the dip caused by inclination if the compass is taken to a zone with a higher or lower dip. Like any magnetic device, compasses are affected by nearby ferrous materials, as well as by strong local electromagnetic forces. Compasses used for wilderness land navigation should not be used in proximity to ferrous metal objects or electromagnetic fields (car electrical systems, automobile engines, steel pitons , etc.) as that can affect their accuracy. Compasses are particularly difficult to use accurately in or near trucks, cars or other mechanized vehicles even when corrected for deviation by

5040-473: A star is determined, the bearing can be transferred to a reference point on Earth. The point can then be used as a base for further observations. Survey-accurate astronomic positions were difficult to observe and calculate and so tended to be a base off which many other measurements were made. Since the advent of the GPS system, astronomic observations are rare as GPS allows adequate positions to be determined over most of

5180-495: A theodolite with a compass and tripod in 1576. Johnathon Sission was the first to incorporate a telescope on a theodolite in 1725. In the 18th century, modern techniques and instruments for surveying began to be used. Jesse Ramsden introduced the first precision theodolite in 1787. It was an instrument for measuring angles in the horizontal and vertical planes. He created his great theodolite using an accurate dividing engine of his own design. Ramsden's theodolite represented

5320-593: A time component. Before EDM (Electronic Distance Measurement) laser devices, distances were measured using a variety of means. In pre-colonial America Natives would use the "bow shot" as a distance reference ("as far as an arrow can slung out of a bow", or "flights of a Cherokee long bow"). Europeans used chains with links of a known length such as a Gunter's chain , or measuring tapes made of steel or invar . To measure horizontal distances, these chains or tapes were pulled taut to reduce sagging and slack. The distance had to be adjusted for heat expansion. Attempts to hold

5460-463: Is 100 grads to give a circle of 400 grads. Dividing grads into tenths to give a circle of 4000 decigrades has also been used in armies. Most military forces have adopted the French " millieme " system. This is an approximation of a milli-radian (6283 per circle), in which the compass dial is spaced into 6400 units or "mils" for additional precision when measuring angles, laying artillery, etc. The value to

5600-474: Is a staple of contemporary land surveying. Typically, much if not all of the drafting and some of the designing for plans and plats of the surveyed property is done by the surveyor, and nearly everyone working in the area of drafting today (2021) utilizes CAD software and hardware both on PC, and more and more in newer generation data collectors in the field as well. Other computer platforms and tools commonly used today by surveyors are offered online by

5740-399: Is a term used when referring to moving the level to take an elevation shot from a different location. To "turn" the level, one must first take a reading and record the elevation of the point the rod is located on. While the rod is being kept in exactly the same location, the level is moved to a new location where the rod is still visible. A reading is taken from the new location of the level and

Russian Hydrographic Service - Misplaced Pages Continue

5880-400: Is also appearing. The main surveying instruments in use around the world are the theodolite , measuring tape , total station , 3D scanners , GPS / GNSS , level and rod . Most instruments screw onto a tripod when in use. Tape measures are often used for measurement of smaller distances. 3D scanners and various forms of aerial imagery are also used. The theodolite is an instrument for

6020-412: Is an alternate method of determining the position of objects, and was often used to measure imprecise features such as riverbanks. The surveyor would mark and measure two known positions on the ground roughly parallel to the feature, and mark out a baseline between them. At regular intervals, a distance was measured at right angles from the first line to the feature. The measurements could then be plotted on

6160-505: Is because divergent conditions further away from the base reduce accuracy. Surveying instruments have characteristics that make them suitable for certain uses. Theodolites and levels are often used by constructors rather than surveyors in first world countries. The constructor can perform simple survey tasks using a relatively cheap instrument. Total stations are workhorses for many professional surveyors because they are versatile and reliable in all conditions. The productivity improvements from

6300-412: Is carrying an electric current. Magnetic compasses are prone to errors in the neighborhood of such bodies. Some compasses include magnets which can be adjusted to compensate for external magnetic fields, making the compass more reliable and accurate. A compass is also subject to errors when the compass is accelerated or decelerated in an airplane or automobile. Depending on which of the Earth's hemispheres

6440-585: Is currently about half of that to within 2 cm ± 2 ppm. GPS surveying differs from other GPS uses in the equipment and methods used. Static GPS uses two receivers placed in position for a considerable length of time. The long span of time lets the receiver compare measurements as the satellites orbit. The changes as the satellites orbit also provide the measurement network with well conditioned geometry. This produces an accurate baseline that can be over 20 km long. RTK surveying uses one static antenna and one roving antenna. The static antenna tracks changes in

6580-408: Is defined as the angle between the direction of true (geographic) north and the direction of the meridian between the magnetic poles. Variation values for most of the oceans had been calculated and published by 1914. Deviation refers to the response of the compass to local magnetic fields caused by the presence of iron and electric currents; one can partly compensate for these by careful location of

6720-420: Is enough to protect from walking in a substantially different direction than expected over short distances, provided the terrain is fairly flat and visibility is not impaired. By carefully recording distances (time or paces) and magnetic bearings traveled, one can plot a course and return to one's starting point using the compass alone. Compass navigation in conjunction with a map ( terrain association ) requires

6860-404: Is required when constructing a compass. This can be created by aligning an iron or steel rod with Earth's magnetic field and then tempering or striking it. However, this method produces only a weak magnet so other methods are preferred. For example, a magnetised rod can be created by repeatedly rubbing an iron rod with a magnetic lodestone . This magnetised rod (or magnetic needle) is then placed on

7000-732: Is similar to a gyroscope . It is a non-magnetic compass that finds true north by using an (electrically powered) fast-spinning wheel and friction forces in order to exploit the rotation of the Earth. Gyrocompasses are widely used on ships . They have two main advantages over magnetic compasses: Large ships typically rely on a gyrocompass, using the magnetic compass only as a backup. Increasingly, electronic fluxgate compasses are used on smaller vessels. However, magnetic compasses are still widely in use as they can be small, use simple reliable technology, are comparatively cheap, are often easier to use than GPS , require no energy supply, and unlike GPS, are not affected by objects, e.g. trees, that can block

7140-454: Is the magnetic bearing to the target. Again, if one is using "true" or map bearings, and the compass does not have preset, pre-adjusted declination, one must additionally add or subtract magnetic declination to convert the magnetic bearing into a true bearing . The exact value of the magnetic declination is place-dependent and varies over time, though declination is frequently given on the map itself or obtainable on-line from various sites. If

SECTION 50

#1733085606567

7280-406: Is the technique, profession, art, and science of determining the terrestrial two-dimensional or three-dimensional positions of points and the distances and angles between them. These points are usually on the surface of the Earth, and they are often used to establish maps and boundaries for ownership , locations, such as the designated positions of structural components for construction or

7420-432: Is with an altimeter  using air pressure to find the height. When more precise measurements are needed, means like precise levels (also known as differential leveling) are used. When precise leveling, a series of measurements between two points are taken using an instrument and a measuring rod. Differences in height between the measurements are added and subtracted in a series to get the net difference in elevation between

7560-450: The Atlantic , Pacific , Indian , Arctic , as well as of the then little explored Southern Ocean off the coast of Antarctica . As a result, a huge volume of data on bottom topography , physical fields , and hydrophysical characteristics of the water masses, among other pioneering oceanographic information of the oceans, were collected. In 1972, owing to Cold War dictated priorities,

7700-695: The Great Pyramid of Giza , built c.  2700 BC , affirm the Egyptians' command of surveying. The groma instrument may have originated in Mesopotamia (early 1st millennium BC). The prehistoric monument at Stonehenge ( c.  2500 BC ) was set out by prehistoric surveyors using peg and rope geometry. The mathematician Liu Hui described ways of measuring distant objects in his work Haidao Suanjing or The Sea Island Mathematical Manual , published in 263 AD. The Romans recognized land surveying as

7840-744: The Northern Fleet sailed to Rudolf Island in Franz Josef Land . The area had been neglected by the armed forces for a long time in the years that followed the fall of the USSR. The heads of the Hydrographic Service of the Russian Federation in recent times have been: The vessels operating for the Russian Hydrographic Service have been historically of two orders or categories. To the first category belong those vessels that were built specifically as survey ships, of which there are different classes, and to

7980-473: The Northern Hemisphere , to zone 5 covering Australia and the southern oceans. This individual zone balancing prevents excessive dipping of one end of the needle, which can cause the compass card to stick and give false readings. Some compasses feature a special needle balancing system that will accurately indicate magnetic north regardless of the particular magnetic zone. Other magnetic compasses have

8120-499: The Principal Triangulation of Britain . The first Ramsden theodolite was built for this survey. The survey was finally completed in 1853. The Great Trigonometric Survey of India began in 1801. The Indian survey had an enormous scientific impact. It was responsible for one of the first accurate measurements of a section of an arc of longitude, and for measurements of the geodesic anomaly. It named and mapped Mount Everest and

8260-615: The Russian Navy and the agents and supervisors of hydrographic works have been largely naval officers throughout its history. Russia is a member of the International Hydrographic Organization . Despite having undergone a number of name changes along its history, the main functions of the Hydrographic Service of the Russian Navy have been quite consistently the following: At the time of Peter I hydrographic surveys were carried out following personal decrees of

8400-505: The Silva 4b Militaire , and the Suunto M-5N(T) contain the radioactive material tritium ( 1 H ) and a combination of phosphors. The U.S. M-1950 equipped with self-luminous lighting contains 120 mCi (millicuries) of tritium. The purpose of the tritium and phosphors is to provide illumination for the compass, via radioluminescent tritium illumination , which does not require

8540-601: The Torrens system in South Australia in 1858. Torrens intended to simplify land transactions and provide reliable titles via a centralized register of land. The Torrens system was adopted in several other nations of the English-speaking world. Surveying became increasingly important with the arrival of railroads in the 1800s. Surveying was necessary so that railroads could plan technologically and financially viable routes. At

SECTION 60

#1733085606567

8680-785: The U.S. Federal Government and other governments' survey agencies, such as the National Geodetic Survey and the CORS network, to get automated corrections and conversions for collected GPS data, and the data coordinate systems themselves. Surveyors determine the position of objects by measuring angles and distances. The factors that can affect the accuracy of their observations are also measured. They then use this data to create vectors, bearings, coordinates, elevations, areas, volumes, plans and maps. Measurements are often split into horizontal and vertical components to simplify calculation. GPS and astronomic measurements also need measurement of

8820-502: The magnetized needle at its heart aligns itself with the horizontal component of the Earth's magnetic field . The magnetic field exerts a torque on the needle, pulling the North end or pole of the needle approximately toward the Earth's North magnetic pole , and pulling the other toward the Earth's South magnetic pole . The needle is mounted on a low-friction pivot point, in better compasses

8960-532: The Arctic Institute of the USSR led by Georgy Ushakov and Nikolay Urvantsev thoroughly surveyed the large Severnaya Zemlya archipelago in 1930–32, making it the last sizable territory on Earth to be put on the map. In 1935 the Ubek were replaced by hydrographic offices subordinate to the commander of the fleets and flotillas . In 1937 the 'Hydrographic Office UVMS Red Army' was renamed the "Hydrographic Office of

9100-523: The Earth's curvature. North is often defined as true north at the datum. Compass A compass is a device that shows the cardinal directions used for navigation and geographic orientation. It commonly consists of a magnetized needle or other element, such as a compass card or compass rose , which can pivot to align itself with magnetic north . Other methods may be used, including gyroscopes, magnetometers , and GPS receivers. Compasses often show angles in degrees: north corresponds to 0°, and

9240-674: The Hydrographic Department of the Navy was formed in Moscow by the Chief of the General Staff in order to deal more effectively with the emergency matters caused by the war in Russian soil and waters. In postwar times, after the initial period of reconstruction was over, the Soviet Navy began the challenging task of creating an oceanic fleet carrying nuclear weapons . The 1960–1970 decade saw

9380-535: The Hydrographic Office of the Navy was overhauled and transformed into the 'General Directorate of Navigation and Oceanography of the Ministry of Defense of the USSR' —Главное управление навигации и океанографии Министерства обороны СССР (ГУНиО МО). The 1970–1980 decade was marked by an increased international prominence of the 'General Directorate of Navigation and Oceanography of the Ministry of Defense'. Since then

9520-660: The Hydrographic Service of the USSR officially represented the interests of the Soviet Union —in the same manner that the organization that replaced it in later years would do for the Russian Federation— in the International Hydrographic Organization and the International Association of Lighthouse Authorities , as well as the interests of the Ministry of Defence in the Intergovernmental Oceanographic Commission of UNESCO . The heads of

9660-668: The Hydrographic Service of the USSR were: In the wake of the dissolution of the Soviet Union , the 'General Directorate of Navigation and Oceanography of Defense of the USSR' would be placed under the Russian Federation , the legal successor of the USSR. In 1992 the service was renamed as the 'Main Directorate of Navigation and Oceanography of the Ministry of Defense of the Russian Federation' —Главное управление навигации и океанографии Министерства Обороны Российской Федерации (ГУНиО Минобороны России). Depending from their location, some of

9800-591: The Red Army) —Гидрографический отдел Управления Военно-морских сил Рабоче-крестьянской Красной Армии. In 1927 the name was simplified to 'Hydrographic Office UVMS Red Army' —Гидрографическое управление УВМС РККА. Emperor Nicholas II Land first partially charted by Boris Vilkitsky in 1913, but still not fully surveyed when it was renamed Severnaya Zemlya by the Presidium of the Central Executive Committee of

9940-604: The Russian Hydrographic Department was overhauled and renamed as 'Main Hydrographic Office' —Главное гидрографическое управление (ГГУ)— of the Admiralty. Its chief was the former director in charge of the lighthouses and navigation of the Baltic Sea, Vice Admiral R. Bazhenov , who was also the chairman of the Maritime Scientific Committee —Морского учёного комитета. 1886 saw the establishment of

10080-450: The Russian Hydrographic Service would be changed to 'Department of Navigation and Oceanography of the Ministry of Defence of the Russian Federation' —Управление навигации и океанографии Министерства Обороны Российской Федерации (УНиО Минобороны России), its current official name. Russian military presence in Arctic waters resumed in the summer of 2013 when Hydrographic Service vessels belonging to

10220-537: The USSR in 1926, was the last blank area on the vast map of the Soviet Union. Vilkitsky's expedition, which in 1913 sighted and surveyed a section of the eastern coastline of what he assumed was a single landmass, had to concentrate on the Siberian continental shore in order to prepare the way for the Northeast Passage and he had no means to make a comprehensive survey further north. Finally a hydrographic expedition of

10360-527: The Workers' and Peasants' Navy" —Гидрографическое управление Рабоче-крестьянского Военно-морского флота (РК ВМФ). The design of the flags and pennants used by the office also underwent changes. In 1940 the Hydrographic Office was renamed 'Hydrographic Office of the Navy' —Гидрографическое управление ВМФ. The following year, owing to the dire situation of the Great Patriotic War (1941–1945), a Task Force in

10500-467: The angles increase clockwise , so east is 90°, south is 180°, and west is 270°. These numbers allow the compass to show azimuths or bearings which are commonly stated in degrees. If local variation between magnetic north and true north is known, then direction of magnetic north also gives direction of true north. Among the Four Great Inventions , the magnetic compass was first invented as

10640-456: The baseplate. To check one's progress along a course or azimuth, or to ensure that the object in view is indeed the destination, a new compass reading may be taken to the target if visible (here, the large mountain). After pointing the DOT arrow on the baseplate at the target, the compass is oriented so that the needle is superimposed over the orienting arrow in the capsule. The resulting bearing indicated

10780-400: The basic designs were left unchanged, prominent Communist-era symbols —such as the hammer and sickle and the red star , were removed from the flags of the Russian Hydrographic Service and the blue and white Russian Navy Ensign was restored. In 2001 a new regulation introduced slight alterations in the symbols that had been adopted in 1992 following the fall of the USSR. In 2006 the name of

10920-438: The basis for dividing the western territories into sections to allow the sale of land. The PLSS divided states into township grids which were further divided into sections and fractions of sections. Napoleon Bonaparte founded continental Europe 's first cadastre in 1808. This gathered data on the number of parcels of land, their value, land usage, and names. This system soon spread around Europe. Robert Torrens introduced

11060-457: The bearing from every vertex in a figure, a surveyor can measure around the figure. The final observation will be between the two points first observed, except with a 180° difference. This is called a close . If the first and last bearings are different, this shows the error in the survey, called the angular misclose . The surveyor can use this information to prove that the work meets the expected standards. The simplest method for measuring height

11200-489: The bearing so that both map and compass are in agreement. In the given example, the large mountain in the second photo was selected as the target destination on the map. Some compasses allow the scale to be adjusted to compensate for the local magnetic declination; if adjusted correctly, the compass will give the true bearing instead of the magnetic bearing. The modern hand-held protractor compass always has an additional direction-of-travel (DOT) arrow or indicator inscribed on

11340-462: The beginning of the century, surveyors had improved the older chains and ropes, but they still faced the problem of accurate measurement of long distances. Trevor Lloyd Wadley developed the Tellurometer during the 1950s. It measures long distances using two microwave transmitter/receivers. During the late 1950s Geodimeter introduced electronic distance measurement (EDM) equipment. EDM units use

11480-516: The boundaries. Young boys were included to ensure the memory lasted as long as possible. In England, William the Conqueror commissioned the Domesday Book in 1086. It recorded the names of all the land owners, the area of land they owned, the quality of the land, and specific information of the area's content and inhabitants. It did not include maps showing exact locations. Abel Foullon described

11620-414: The cardinal directions can be calculated. Manufactured primarily for maritime and aviation applications, they can also detect pitch and roll of ships. Small, portable GPS receivers with only a single antenna can also determine directions if they are being moved, even if only at walking pace. By accurately determining its position on the Earth at times a few seconds apart, the device can calculate its speed and

11760-442: The case of the compass. The effect of ferromagnetic materials in the compass's environment can be corrected by two iron balls mounted on either side of the compass binnacle in concert with permanent magnets and a Flinders bar . The coefficient a 0 {\displaystyle a_{0}} represents the error in the lubber line, while a 1 , b 1 {\displaystyle a_{1},b_{1}}

11900-749: The compass and the placement of compensating magnets under the compass itself. Mariners have long known that these measures do not completely cancel deviation; hence, they performed an additional step by measuring the compass bearing of a landmark with a known magnetic bearing. They then pointed their ship to the next compass point and measured again, graphing their results. In this way, correction tables could be created, which would be consulted when compasses were used when traveling in those locations. Mariners are concerned about very accurate measurements; however, casual users need not be concerned with differences between magnetic and true North. Except in areas of extreme magnetic declination variance (20 degrees or more), this

12040-407: The compass card. For a table of the thirty-two points, see compass points . In the modern era, the 360-degree system took hold. This system is still in use today for civilian navigators. The degree system spaces 360 equidistant points located clockwise around the compass dial. In the 19th century some European nations adopted the " grad " (also called grade or gon) system instead, where a right angle

12180-409: The compass is located and if the force is acceleration or deceleration the compass will increase or decrease the indicated heading. Compasses that include compensating magnets are especially prone to these errors, since accelerations tilt the needle, bringing it closer or further from the magnets. Another error of the mechanical compass is the turning error. When one turns from a heading of east or west

12320-451: The compass is located on the surface of the Earth the angle between true north and magnetic north , called magnetic declination can vary widely with geographic location. The local magnetic declination is given on most maps, to allow the map to be oriented with a compass parallel to true north. The locations of the Earth's magnetic poles slowly change with time, which is referred to as geomagnetic secular variation . The effect of this means

12460-400: The compass to be "recharged" by sunlight or artificial light. However, tritium has a half-life of only about 12 years, so a compass that contains 120 mCi of tritium when new will contain only 60 when it is 12 years old, 30 when it is 24 years old, and so on. Consequently, the illumination of the display will fade. Mariners' compasses can have two or more magnets permanently attached to

12600-400: The compass was previously at is causing interference and should be avoided. There are other ways to find north than the use of magnetism, and from a navigational point of view a total of seven possible ways exist (where magnetism is one of the seven). Two sensors that use two of the remaining six principles are often also called compasses, i.e. the gyrocompass and GPS-compass. A gyrocompass

12740-410: The compass will lag behind the turn or lead ahead of the turn. Magnetometers, and substitutes such as gyrocompasses, are more stable in such situations. A thumb compass is a type of compass commonly used in orienteering , a sport in which map reading and terrain association are paramount. Consequently, most thumb compasses have minimal or no degree markings at all, and are normally used only to orient

12880-409: The correct local compass variation so as to indicate the true heading. ‹The template How-to is being considered for merging .›   A magnetic compass points to magnetic north pole, which is approximately 1,000 miles from the true geographic North Pole. A magnetic compass's user can determine true North by finding the magnetic north and then correcting for variation and deviation. Variation

13020-425: The development of models with extremely fast-settling and stable needles utilizing rare-earth magnets for optimal use with a topographic map , a land navigation technique known as terrain association . Many marine compasses designed for use on boats with constantly shifting angles use dampening fluids such as isopar M or isopar L to limit the rapid fluctuation and direction of the needle. The military forces of

13160-405: The development of the human environment since the beginning of recorded history . It is used in the planning and execution of most forms of construction . It is also used in transportation, communications, mapping, and the definition of legal boundaries for land ownership. It is an important tool for research in many other scientific disciplines. The International Federation of Surveyors defines

13300-562: The early days of surveying, this was the primary method of determining accurate positions of objects for topographic maps of large areas. A surveyor first needs to know the horizontal distance between two of the objects, known as the baseline . Then the heights, distances and angular position of other objects can be derived, as long as they are visible from one of the original objects. High-accuracy transits or theodolites were used, and angle measurements were repeated for increased accuracy. See also Triangulation in three dimensions . Offsetting

13440-704: The emperor through the General admiral . Hydrographic tasks were always performed by Naval officers, who from 1724 onward began to work under instructions from the Admiralty Board . By 1746 important matters concerning hydrography were entrusted to Fleet Captain Alexey Nagayev who compiled the first atlas of the Bering Sea , as well as of the Baltic Sea in 1752. Nagayev's charts were very detailed for its time and, despite

13580-463: The ferromagnetic effects and a 2 , b 2 {\displaystyle a_{2},b_{2}} the non-ferromagnetic component. A similar process is used to calibrate the compass in light general aviation aircraft, with the compass deviation card often mounted permanently just above or below the magnetic compass on the instrument panel. Fluxgate electronic compasses can be calibrated automatically, and can also be programmed with

13720-533: The first prototype satellites of the Global Positioning System (GPS) in 1978. GPS used a larger constellation of satellites and improved signal transmission, thus improving accuracy. Early GPS observations required several hours of observations by a static receiver to reach survey accuracy requirements. Later improvements to both satellites and receivers allowed for Real Time Kinematic (RTK) surveying. RTK surveys provide high-accuracy measurements by using

13860-467: The first triangulation of France. They included a re-surveying of the meridian arc , leading to the publication in 1745 of the first map of France constructed on rigorous principles. By this time triangulation methods were well established for local map-making. It was only towards the end of the 18th century that detailed triangulation network surveys mapped whole countries. In 1784, a team from General William Roy 's Ordnance Survey of Great Britain began

14000-538: The former hydrographic institution being renamed as the 'Main Hydrographic Office of the Russian Republic' —Главное гидрографическое управление Российской Республики. Between 1918 and 1922 hydrometeorological service units named Ubek (Убек) were established for the management of navigation safety measures. The Ubek regulated the particular hydrographic zone —in Arkhangelsk for example it was 'Ubek-North'— as part of

14140-447: The former institutions dealing with hydrography were abolished and all the management of the hydrographic section was transferred to the newly-instituted Russian Hydrographic Department, the directors of which were: The Hydrographic Office engaged in the periodical publication of notes, devoted both to hydrographic information, as well as information on other sectors of naval affairs. The committee, established in 1799, published: In 1885

14280-509: The function of surveying as follows: A surveyor is a professional person with the academic qualifications and technical expertise to conduct one, or more, of the following activities; Surveying has occurred since humans built the first large structures. In ancient Egypt , a rope stretcher would use simple geometry to re-establish boundaries after the annual floods of the Nile River . The almost perfect squareness and north–south orientation of

14420-748: The ground (about 20 km (12 mi) apart). This method reaches precisions between 5–40 cm (depending on flight height). Surveyors use ancillary equipment such as tripods and instrument stands; staves and beacons used for sighting purposes; PPE ; vegetation clearing equipment; digging implements for finding survey markers buried over time; hammers for placements of markers in various surfaces and structures; and portable radios for communication over long lines of sight. Land surveyors, construction professionals, geomatics engineers and civil engineers using total station , GPS , 3D scanners, and other collector data use land surveying software to increase efficiency, accuracy, and productivity. Land Surveying Software

14560-509: The ground to large beacons that can be seen from long distances. The surveyors can set up their instruments in this position and measure to nearby objects. Sometimes a tall, distinctive feature such as a steeple or radio aerial has its position calculated as a reference point that angles can be measured against. Triangulation is a method of horizontal location favoured in the days before EDM and GPS measurement. It can determine distances, elevations and directions between distant objects. Since

14700-400: The height difference is used to find the new elevation of the level gun, which is why this method is referred to as differential levelling . This is repeated until the series of measurements is completed. The level must be horizontal to get a valid measurement. Because of this, if the horizontal crosshair of the instrument is lower than the base of the rod, the surveyor will not be able to sight

14840-420: The hiker has been following the correct path, the compass' corrected (true) indicated bearing should closely correspond to the true bearing previously obtained from the map. A compass should be laid down on a level surface so that the needle only rests or hangs on the bearing fused to the compass casing – if used at a tilt, the needle might touch the casing on the compass and not move freely, hence not pointing to

14980-565: The initial period of instability that followed the 1917 Russian Revolution against the Imperial Government, the Hydrographic Office slowly returned to its duties as the situation calmed down and the Soviet takeover was completed. The work and dedication of hydrographers such as Konstantin Neupokoev , ensured that the service returned to normality. Czarist names and symbols were quickly removed,

15120-499: The introduction and development of ballistic missile submarines as part of the strategical aims of the Soviet fleet. These submarines were designed to be able to navigate in all areas of the oceans, including in the Arctic Ocean under the ice cover . In the field of navigation, during this period radar reflectors, radio beacons and other modernized signal systems were introduced. The technological leap of that decade would impose

15260-536: The magnetic north accurately, giving a faulty reading. To see if the needle is well leveled, look closely at the needle, and tilt it slightly to see if the needle is swaying side to side freely and the needle is not contacting the casing of the compass. If the needle tilts to one direction, tilt the compass slightly and gently to the opposing direction until the compass needle is horizontal, lengthwise. Items to avoid around compasses are magnets of any kind and any electronics. Magnetic fields from electronics can easily disrupt

15400-647: The magnetic pole the compass will not indicate any particular direction but will begin to drift. Also, the needle starts to point up or down when getting closer to the poles, because of the so-called magnetic inclination . Cheap compasses with bad bearings may get stuck because of this and therefore indicate a wrong direction. Magnetic compasses are influenced by any fields other than Earth's. Local environments may contain magnetic mineral deposits and artificial sources such as MRIs , large iron or steel bodies, electrical engines or strong permanent magnets. Any electrically conductive body produces its own magnetic field when it

15540-418: The map to magnetic north. An oversized rectangular needle or north indicator aids visibility. Thumb compasses are also often transparent so that an orienteer can hold a map in the hand with the compass and see the map through the compass. The best models use rare-earth magnets to reduce needle settling time to 1 second or less. The earth inductor compass (or "induction compass") determines directions using

15680-464: The measurement of angles. It uses two separate circles , protractors or alidades to measure angles in the horizontal and the vertical plane. A telescope mounted on trunnions is aligned vertically with the target object. The whole upper section rotates for horizontal alignment. The vertical circle measures the angle that the telescope makes against the vertical, known as the zenith angle. The horizontal circle uses an upper and lower plate. When beginning

15820-409: The measurement of vertical angles. Verniers allowed measurement to a fraction of a degree, such as with a turn-of-the-century transit . The plane table provided a graphical method of recording and measuring angles, which reduced the amount of mathematics required. In 1829 Francis Ronalds invented a reflecting instrument for recording angles graphically by modifying the octant . By observing

15960-424: The measuring instrument level would also be made. When measuring up a slope, the surveyor might have to "break" (break chain) the measurement- use an increment less than the total length of the chain. Perambulators , or measuring wheels, were used to measure longer distances but not to a high level of accuracy. Tacheometry is the science of measuring distances by measuring the angle between two ends of an object with

16100-402: The meteorological department. In 1891 the fields of drawing, engraving, lithography and printing were integrated into the maritime cartography section and from 1897 this section began successful experiments printing nautical charts using aluminum printing plates. In 1902 a new building with a photographic department, including a workshop introducing innovative photographic reproduction techniques,

16240-415: The military is that one angular mil subtends approximately one metre at a distance of one kilometer. Imperial Russia used a system derived by dividing the circumference of a circle into chords of the same length as the radius. Each of these was divided into 100 spaces, giving a circle of 600. The Soviet Union divided these into tenths to give a circle of 6000 units, usually translated as "mils". This system

16380-411: The modern systematic use of triangulation . In 1615 he surveyed the distance from Alkmaar to Breda , approximately 72 miles (116 km). He underestimated this distance by 3.5%. The survey was a chain of quadrangles containing 33 triangles in all. Snell showed how planar formulae could be corrected to allow for the curvature of the Earth . He also showed how to resect , or calculate, the position of

16520-465: The needle, preventing it from aligning with the Earth's magnetic fields, causing inaccurate readings. The Earth's natural magnetic forces are considerably weak, measuring at 0.5 gauss and magnetic fields from household electronics can easily exceed it, overpowering the compass needle. Exposure to strong magnets, or magnetic interference can sometimes cause the magnetic poles of the compass needle to differ or even reverse. Avoid iron rich deposits when using

16660-534: The north end of the needle are often marked with phosphorescent , photoluminescent , or self-luminous materials to enable the compass to be read at night or in poor light. As the compass fill liquid is noncompressible under pressure, many ordinary liquid-filled compasses will operate accurately underwater to considerable depths. Many modern compasses incorporate a baseplate and protractor tool, and are referred to variously as " orienteering ", "baseplate", "map compass" or "protractor" designs. This type of compass uses

16800-642: The other Himalayan peaks. Surveying became a professional occupation in high demand at the turn of the 19th century with the onset of the Industrial Revolution . The profession developed more accurate instruments to aid its work. Industrial infrastructure projects used surveyors to lay out canals , roads and rail. In the US, the Land Ordinance of 1785 created the Public Land Survey System . It formed

16940-464: The principle of electromagnetic induction , with the Earth's magnetic field acting as the induction field for an electric generator , the measurable output of which varies depending on orientation . Small electronic compasses ( eCompasses ) found in clocks, mobile phones , and other electronic devices are solid-state microelectromechanical systems (MEMS) compasses, usually built out of two or three magnetic field sensors that provide data for

17080-500: The printing of nautical charts. The 1910–1915 Arctic Ocean Hydrographic Expedition , led by Rear Admiral Boris A. Vilkitsky on icebreakers Vaigach and Taimyr mapped the last blank areas of the northern coast of Eastern Siberia —which were the last unmapped coastal areas of Eurasia , and gathered as well a vast amount of oceanographic and meteorological data. The heads of the Main Hydrographic Office were: After

17220-401: The reception of electronic signals. GPS receivers using two or more antennae mounted separately and blending the data with an inertial motion unit (IMU) can now achieve 0.02° in heading accuracy and have startup times in seconds rather than hours for gyrocompass systems. The devices accurately determine the positions (latitudes, longitudes and altitude) of the antennae on the Earth, from which

17360-474: The rod and get a reading. The rod can usually be raised up to 25 feet (7.6 m) high, allowing the level to be set much higher than the base of the rod. The primary way of determining one's position on the Earth's surface when no known positions are nearby is by astronomic observations. Observations to the Sun, Moon and stars could all be made using navigational techniques. Once the instrument's position and bearing to

17500-422: The satellite positions and atmospheric conditions. The surveyor uses the roving antenna to measure the points needed for the survey. The two antennas use a radio link that allows the static antenna to send corrections to the roving antenna. The roving antenna then applies those corrections to the GPS signals it is receiving to calculate its own position. RTK surveying covers smaller distances than static methods. This

17640-414: The second, other kind of vessels of the Russian Navy that, although not especially built for the purpose, have eventually engaged in survey operations. The latter usually undertook surveys for specific periods of time during their naval service, such as the a four-masted tall ship Kruzenshtern , which performed hydrographic surveys between 1961 and 1965. Surveying Surveying or land surveying

17780-678: The surface location of subsurface features, or other purposes required by government or civil law, such as property sales. A professional in land surveying is called a land surveyor . Surveyors work with elements of geodesy , geometry , trigonometry , regression analysis , physics , engineering, metrology , programming languages , and the law. They use equipment, such as total stations , robotic total stations, theodolites , GNSS receivers, retroreflectors , 3D scanners , lidar sensors, radios, inclinometer , handheld tablets, optical and digital levels , subsurface locators, drones, GIS , and surveying software. Surveying has been an element in

17920-423: The surface of the Earth. Few survey positions are derived from the first principles. Instead, most surveys points are measured relative to previously measured points. This forms a reference or control network where each point can be used by a surveyor to determine their own position when beginning a new survey. Survey points are usually marked on the earth's surface by objects ranging from small nails driven into

18060-406: The survey, the surveyor points the instrument in a known direction (bearing), and clamps the lower plate in place. The instrument can then rotate to measure the bearing to other objects. If no bearing is known or direct angle measurement is wanted, the instrument can be set to zero during the initial sight. It will then read the angle between the initial object, the theodolite itself, and the item that

18200-536: The telescope aligns with. The gyrotheodolite is a form of theodolite that uses a gyroscope to orient itself in the absence of reference marks. It is used in underground applications. The total station is a development of the theodolite with an electronic distance measurement device (EDM). A total station can be used for leveling when set to the horizontal plane. Since their introduction, total stations have shifted from optical-mechanical to fully electronic devices. Modern top-of-the-line total stations no longer need

18340-479: The true bearing (relative to true north ) of its direction of motion. Frequently, it is preferable to measure the direction in which a vehicle is actually moving, rather than its heading, i.e. the direction in which its nose is pointing. These directions may be different if there is a crosswind or tidal current. GPS compasses share the main advantages of gyrocompasses. They determine true North, as opposed to magnetic North, and they are unaffected by perturbations of

18480-459: The two endpoints. With the Global Positioning System (GPS), elevation can be measured with satellite receivers. Usually, GPS is somewhat less accurate than traditional precise leveling, but may be similar over long distances. When using an optical level, the endpoint may be out of the effective range of the instrument. There may be obstructions or large changes of elevation between the endpoints. In these situations, extra setups are needed. Turning

18620-607: The unified local authority directly responsible to the central Soviet government. In 1924 the Hydrographic Office was renamed the 'Central Hydrographic Department of the USSR ' and a set of new flags and pennants was issued. Barely two years later, in September 1926, the office underwent another name change; the new name was "Hydrographic Department of the Office of Naval Forces of the Workers' and Peasants' Red Army " (UVMS Hydrographic Department of

18760-407: The use of built-in magnets or other devices. Large amounts of ferrous metal combined with the on-and-off electrical fields caused by the vehicle's ignition and charging systems generally result in significant compass errors. At sea, a ship's compass must also be corrected for errors, called deviation , caused by iron and steel in its structure and equipment. The ship is swung , that is rotated about

18900-782: The vessels of the Soviet Hydrographic Service managed to be released and join the navies of the newly-formed republics after the breakup of the USSR. These ships were usually renamed and overhauled or transformed before being put into use, for example the GS-13 small hydrographic vessel that had been launched in 1986 in Soviet Lithuania became the Pereyaslav (U512) when it was made part of the Ukrainian Navy in November 1995. Although

19040-553: Was adopted by the former Warsaw Pact countries, e.g. , the Soviet Union, East Germany , etc., often counterclockwise (see picture of wrist compass). This is still in use in Russia. Because the Earth's magnetic field's inclination and intensity vary at different latitudes, compasses are often balanced during manufacture so that the dial or needle will be level, eliminating needle drag. Most manufacturers balance their compass needles for one of five zones, ranging from zone 1, covering most of

19180-476: Was built within the premises of the Main Hydrographic Office. By 1904 the new techniques had been mastered by the staff and high-quality material began to be printed. The duties of the Hydrographic Department at the time included: The jurisdiction of the Main Hydrographic Office included the management of: The period between 1885 and 1917 was characterized by full-scale construction and modernization of lighthouse equipment, compass technology and improvements in

19320-608: Was created, and in 1807 the Russian Lighthouse Administration was established so that the lighthouse system in Russian shores, shoals and islands would follow an organized pattern and be provided with regular, state-controlled maintenance. The first director of this section was Leontiy Spafaryev . In 1827 the special Office of the Hydrographer General was established. In the same year the Corps of Naval Navigators

19460-410: Was founded, the chief of which was also a hydrographer. The first and only general of the newly-instituted body was hydrographer Admiral Gavril Andreevich Sarychev (in office 1827–31), after whose death the management of the office was transferred to the Chief of Naval Staff Prince A. S. Menshikov . The first and only director of the hydrographic depot was F. F. Schubert (in office 1827–37). In 1837

19600-497: Was the US Navy TRANSIT system . The first successful launch took place in 1960. The system's main purpose was to provide position information to Polaris missile submarines. Surveyors found they could use field receivers to determine the location of a point. Sparse satellite cover and large equipment made observations laborious and inaccurate. The main use was establishing benchmarks in remote locations. The US Air Force launched

#566433