Misplaced Pages

#710289

114-611: QuickPlay software revisions up to version 2.3 have two main components. The first component is a "Direct" function that provides instant access upon boot to music CDs , DVD movies, and MP3s stored on the hard drive . It is launched by the QuickPlay external button found on the notebook or included IR remote. QuickPlay "Direct" is possible through software on a separate partition with a custom operating system (Linux for QuickPlay 1.0 and Windows XP embedded for QuickPlay 2.3) installed. The secondary component of QuickPlay software (all versions)

228-684: A spindle that holds flat circular disks, called platters , which hold the recorded data. The platters are made from a non-magnetic material, usually aluminum alloy , glass , or ceramic . They are coated with a shallow layer of magnetic material typically 10–20 nm in depth, with an outer layer of carbon for protection. For reference, a standard piece of copy paper is 0.07–0.18 mm (70,000–180,000 nm) thick. The platters in contemporary HDDs are spun at speeds varying from 4200  rpm in energy-efficient portable devices, to 15,000 rpm for high-performance servers. The first HDDs spun at 1,200 rpm and, for many years, 3,600 rpm

342-400: A CD-DA layer. The optophone , first presented in 1913, was an early device that used light for both recording and playback of sound signals on a transparent photograph . More than thirty years later, American inventor James T. Russell has been credited with inventing the first system to record digital media on a photosensitive plate. Russell's patent application was filed in 1966, and he

456-489: A Red Book CD; thus, the mono source material is usually presented as two identical channels in a standard Red Book stereo track (i.e., mirrored mono ); an MP3 CD , can have audio file formats with mono sound. CD-Text is an extension of the Red Book specification for an audio CD that allows for the storage of additional text information (e.g., album name, song name, artist) on a standards-compliant audio CD. The information

570-522: A stepper motor . Early hard disk drives wrote data at some constant bits per second, resulting in all tracks having the same amount of data per track, but modern drives (since the 1990s) use zone bit recording , increasing the write speed from inner to outer zone and thereby storing more data per track in the outer zones. In modern drives, the small size of the magnetic regions creates the danger that their magnetic state might be lost because of thermal effects ⁠ ⁠— thermally induced magnetic instability which

684-416: A "stopgap" technology between PMR and Seagate's intended successor heat-assisted magnetic recording (HAMR). SMR utilises overlapping tracks for increased data density, at the cost of design complexity and lower data access speeds (particularly write speeds and random access 4k speeds). By contrast, HGST (now part of Western Digital ) focused on developing ways to seal helium -filled drives instead of

798-469: A 150-minute playing time, 44,056 Hz sampling rate, 16-bit linear resolution, and cross-interleaved Reed-Solomon coding (CIRC) error correction code —specifications similar to those later settled upon for the standard compact disc format in 1980. Technical details of Sony's digital audio disc were presented during the 62nd AES Convention, held on 13–16 March 1979, in Brussels . Sony's AES technical paper

912-597: A CD. VCDs are playable in dedicated VCD players, most modern DVD-Video players, personal computers, and some video game consoles. The VCD standard was created in 1993 by Sony, Philips, Matsushita , and JVC and is referred to as the White Book standard. Overall picture quality is intended to be comparable to VHS video. Poorly compressed VCD video can sometimes be of lower quality than VHS video, but VCD exhibits block artifacts rather than analog noise and does not deteriorate further with each use. 352×240 (or SIF ) resolution

1026-569: A Field Generation Layer (FGL) and a Spin Injection Layer (SIL), and the FGL produces a magnetic field using spin-polarised electrons originating in the SIL, which is a form of spin torque energy. A typical HDD has two electric motors: a spindle motor that spins the disks and an actuator (motor) that positions the read/write head assembly across the spinning disks. The disk motor has an external rotor attached to

1140-418: A bit cell comprising about 18 magnetic grains (11 by 1.6 grains). Since the mid-2000s, areal density progress has been challenged by a superparamagnetic trilemma involving grain size, grain magnetic strength and ability of the head to write. In order to maintain acceptable signal-to-noise, smaller grains are required; smaller grains may self-reverse ( electrothermal instability ) unless their magnetic strength

1254-489: A breather port, unlike their air-filled counterparts. Other recording technologies are either under research or have been commercially implemented to increase areal density, including Seagate's heat-assisted magnetic recording (HAMR). HAMR requires a different architecture with redesigned media and read/write heads, new lasers, and new near-field optical transducers. HAMR is expected to ship commercially in late 2024, after technical issues delayed its introduction by more than

SECTION 10

#1732876946711

1368-446: A component of the IBM 305 RAMAC system. It was approximately the size of two large refrigerators and stored five million six-bit characters (3.75 megabytes ) on a stack of 52 disks (100 surfaces used). The 350 had a single arm with two read/write heads, one facing up and the other down, that moved both horizontally between a pair of adjacent platters and vertically from one pair of platters to

1482-1080: A decade, from earlier projections as early as 2009. HAMR's planned successor, bit-patterned recording (BPR), has been removed from the roadmaps of Western Digital and Seagate. Western Digital's microwave-assisted magnetic recording (MAMR), also referred to as energy-assisted magnetic recording (EAMR), was sampled in 2020, with the first EAMR drive, the Ultrastar HC550, shipping in late 2020. Two-dimensional magnetic recording (TDMR) and "current perpendicular to plane" giant magnetoresistance (CPP/GMR) heads have appeared in research papers. Some drives have adopted dual independent actuator arms to increase read/write speeds and compete with SSDs. A 3D-actuated vacuum drive (3DHD) concept and 3D magnetic recording have been proposed. Depending upon assumptions on feasibility and timing of these technologies, Seagate forecasts that areal density will grow 20% per year during 2020–2034. The highest-capacity HDDs shipping commercially in 2024 are 32 TB. The capacity of

1596-475: A diameter of 20 cm (7.9 in) and a sound quality superior to that of the vinyl record. However, due to the unsatisfactory performance of the analog format, two Philips research engineers recommended a digital format in March 1974. In 1977, Philips then established a laboratory with the mission of creating a digital audio disc. The diameter of Philips's prototype compact disc was set at 11.5 cm (4.5 in),

1710-417: A disc played from beginning to end slows its rotation rate during playback. The program area is 86.05 cm and the length of the recordable spiral is 86.05 cm / 1.6 μm = 5.38 km. With a scanning speed of 1.2 m/s, the playing time is 74 minutes or 650 MiB of data on a CD-ROM. A disc with data packed slightly more densely is tolerated by most players (though some old ones fail). Using

1824-400: A former member of the task force, gives background information on the many technical decisions made, including the choice of the sampling frequency, playing time, and disc diameter. The task force consisted of around 6 persons, though according to Philips, the compact disc was "invented collectively by a large group of people working as a team". Early milestones in the launch and adoption of

1938-465: A graphics signal (typically, the CD+G player is hooked up to a television set or a computer monitor); these graphics are almost exclusively used to display lyrics on a television set for karaoke performers to sing along with. The CD+G format takes advantage of the channels R through W. These six bits store the graphics information. CD + Extended Graphics (CD+EG, also known as CD+XG) is an improved variant of

2052-648: A joint task force of engineers to design a new digital audio disc. After a year of experimentation and discussion, the Red Book CD-DA standard was published in 1980. After their commercial release in 1982, compact discs and their players were extremely popular. Despite costing up to $ 1,000, over 400,000 CD players were sold in the United States between 1983 and 1984. By 1988, CD sales in the United States surpassed those of vinyl LPs, and, by 1992, CD sales surpassed those of prerecorded music-cassette tapes. The success of

2166-553: A joint task force of engineers to design a new digital audio disc. Led by engineers Kees Schouhamer Immink and Toshitada Doi , the research pushed forward laser and optical disc technology. After a year of experimentation and discussion, the task force produced the Red Book CD-DA standard. First published in 1980, the standard was formally adopted by the IEC as an international standard in 1987, with various amendments becoming part of

2280-453: A linear velocity of 1.2 m/s and a narrower track pitch of 1.5 μm increases the playing time to 80 minutes, and data capacity to 700 MiB. Even denser tracks are possible, with semi-standard 90 minute/800 MiB discs having 1.33 μm, and 99 minute/870 MiB having 1.26 μm, but compatibility suffers as density increases. A CD is read by focusing a 780 nm wavelength ( near infrared ) semiconductor laser through

2394-469: A malfunctioning CD writer . Error scanning can reliably predict data losses caused by media deterioration. Support of error scanning differs between vendors and models of optical disc drives , and extended error scanning (known as "advanced error scanning" in Nero DiscSpeed ) has only been available on Plextor and some BenQ optical drives so far, as of 2020. The digital data on a CD begins at

SECTION 20

#1732876946711

2508-469: A removable disk module, which included both the disk pack and the head assembly, leaving the actuator motor in the drive upon removal. Later "Winchester" drives abandoned the removable media concept and returned to non-removable platters. In 1974, IBM introduced the swinging arm actuator, made feasible because the Winchester recording heads function well when skewed to the recorded tracks. The simple design of

2622-530: A second set. Variants of the IBM 350 were the IBM 355 , IBM 7300 and IBM 1405 . In 1961, IBM announced, and in 1962 shipped, the IBM ;1301 disk storage unit, which superseded the IBM 350 and similar drives. The 1301 consisted of one (for Model 1) or two (for model 2) modules, each containing 25 platters, each platter about 1 ⁄ 8 -inch (3.2 mm) thick and 24 inches (610 mm) in diameter. While

2736-616: A swing arm drive, the IBM 0680 (Piccolo), with eight inch platters, exploring the possibility that smaller platters might offer advantages. Other eight inch drives followed, then 5 + 1 ⁄ 4  in (130 mm) drives, sized to replace the contemporary floppy disk drives . The latter were primarily intended for the then fledgling personal computer (PC) market. Over time, as recording densities were greatly increased, further reductions in disk diameter to 3.5" and 2.5" were found to be optimum. Powerful rare earth magnet materials became affordable during this period, and were complementary to

2850-423: A thin film of ferromagnetic material on both sides of a disk. Sequential changes in the direction of magnetization represent binary data bits . The data is read from the disk by detecting the transitions in magnetization. User data is encoded using an encoding scheme, such as run-length limited encoding, which determines how the data is represented by the magnetic transitions. A typical HDD design consists of

2964-499: A tiny fraction of the detected errors end up as not correctable. Examples of specified uncorrected bit read error rates include: Within a given manufacturers model the uncorrected bit error rate is typically the same regardless of capacity of the drive. The worst type of errors are silent data corruptions which are errors undetected by the disk firmware or the host operating system; some of these errors may be caused by hard disk drive malfunctions while others originate elsewhere in

3078-730: A type of non-volatile storage , retaining stored data when powered off. Modern HDDs are typically in the form of a small rectangular box . Hard disk drives were introduced by IBM in 1956, and were the dominant secondary storage device for general-purpose computers beginning in the early 1960s. HDDs maintained this position into the modern era of servers and personal computers , though personal computing devices produced in large volume, like mobile phones and tablets , rely on flash memory storage devices. More than 224 companies have produced HDDs historically , though after extensive industry consolidation, most units are manufactured by Seagate , Toshiba , and Western Digital . HDDs dominate

3192-460: A variation of this technique called pulse-density modulation (PDM), while Matsushita (now Panasonic ) chose pulse-width modulation (PWM), advertising it as MASH, which is an acronym derived from their patented Multi-stAge noiSe-sHaping PWM topology. The CD was primarily planned as the successor to the vinyl record for playing music, rather than as a data storage medium. However, CDs have grown to encompass other applications. In 1983, following

3306-451: A worm gear is used, a second shorter-throw linear motor, in the form of a coil and magnet, makes fine position adjustments to track eccentricities in the disk at high speed. Some CD drives (particularly those manufactured by Philips during the 1980s and early 1990s) use a swing arm similar to that seen on a gramophone. The pits and lands do not directly represent the 0s and 1s of binary data . Instead, non-return-to-zero, inverted encoding

3420-688: Is a stub . You can help Misplaced Pages by expanding it . Compact Disc The compact disc ( CD ) is a digital optical disc data storage format that was co-developed by Philips and Sony to store and play digital audio recordings. It uses the Compact Disc Digital Audio format which typically provides 74 minutes of audio on a disc. In later years, the compact disc was adapted for non-audio computer data storage purposes as CD-ROM and its derivatives. First released in Japan in October 1982,

3534-553: Is an application run under Windows with identical functions. Newer versions of the Windows-only component (QuickPlay versions above 2.3) have additional gaming and karaoke functions. QuickPlay software versions 3.0 and newer included in notebooks shipping with Windows Vista , solely retain the Windows-only component, as the "Direct" component is no longer implemented due to unresolved compatibility issues. Instead, users must first boot Windows Vista and log into their user accounts before

QuickPlay - Misplaced Pages Continue

3648-476: Is an electro-mechanical data storage device that stores and retrieves digital data using magnetic storage with one or more rigid rapidly rotating platters coated with magnetic material. The platters are paired with magnetic heads , usually arranged on a moving actuator arm, which read and write data to the platter surfaces. Data is accessed in a random-access manner, meaning that individual blocks of data can be stored and retrieved in any order. HDDs are

3762-446: Is capable of scheduling reads and writes efficiently on the platter surfaces and remapping sectors of the media that have failed. Modern drives make extensive use of error correction codes (ECCs), particularly Reed–Solomon error correction . These techniques store extra bits, determined by mathematical formulas, for each block of data; the extra bits allow many errors to be corrected invisibly. The extra bits themselves take up space on

3876-586: Is commonly known as the " superparamagnetic limit ". To counter this, the platters are coated with two parallel magnetic layers, separated by a three-atom layer of the non-magnetic element ruthenium , and the two layers are magnetized in opposite orientation, thus reinforcing each other. Another technology used to overcome thermal effects to allow greater recording densities is perpendicular recording (PMR), first shipped in 2005, and as of 2007 , used in certain HDDs. Perpendicular recording may be accompanied by changes in

3990-499: Is described in a document produced in 1980 by the format's joint creators, Sony and Philips. The document is known colloquially as the Red Book CD-DA after the color of its cover. The format is a two-channel 16-bit PCM encoding at a 44.1 kHz sampling rate per channel. Four-channel sound was to be an allowable option within the Red Book format, but has never been implemented. Monaural audio has no existing standard on

4104-669: Is improving faster than HDDs. NAND has a higher price elasticity of demand than HDDs, and this drives market growth. During the late 2000s and 2010s, the product life cycle of HDDs entered a mature phase, and slowing sales may indicate the onset of the declining phase. The 2011 Thailand floods damaged the manufacturing plants and impacted hard disk drive cost adversely between 2011 and 2013. In 2019, Western Digital closed its last Malaysian HDD factory due to decreasing demand, to focus on SSD production. All three remaining HDD manufacturers have had decreasing demand for their HDDs since 2014. A modern HDD records data by magnetizing

4218-418: Is increased, but known write head materials are unable to generate a strong enough magnetic field sufficient to write the medium in the increasingly smaller space taken by grains. Magnetic storage technologies are being developed to address this trilemma, and compete with flash memory –based solid-state drives (SSDs). In 2013, Seagate introduced shingled magnetic recording (SMR), intended as something of

4332-407: Is playable in standard CD players, thus making them backward compatible. CD- MIDI is a format used to store music-performance data, which upon playback is performed by electronic instruments that synthesize the audio. Hence, unlike the original Red Book CD-DA, these recordings are not digitally sampled audio recordings. The CD-MIDI format is defined as an extension of the original Red Book . For

4446-510: Is protected by a film of lacquer normally spin coated directly on the reflective layer. The label is printed on the lacquer layer, usually by screen printing or offset printing . CD data is represented as tiny indentations known as pits , encoded in a spiral track molded into the top of the polycarbonate layer. The areas between pits are known as lands . Each pit is approximately 100  nm deep by 500 nm wide, and varies from 850 nm to 3.5  μm in length. The distance between

4560-444: Is routinely extended to 80 minutes and 700  MiB ( 734,003,200  bytes), 90 minutes 800  MiB ( 838,860,800  bytes), or 99 minutes 870  MiB ( 912,261,120  bytes) by arranging data more closely on the same-sized disc. The Mini CD has various diameters ranging from 60 to 80 millimetres (2.4 to 3.1 in); they have been used for CD singles or delivering device drivers . The CD gained rapid popularity in

4674-460: Is shaped rather like an arrowhead and is made of doubly coated copper magnet wire . The inner layer is insulation, and the outer is thermoplastic, which bonds the coil together after it is wound on a form, making it self-supporting. The portions of the coil along the two sides of the arrowhead (which point to the center of the actuator bearing) then interact with the magnetic field of the fixed magnet. Current flowing radially outward along one side of

QuickPlay - Misplaced Pages Continue

4788-588: Is specified in unit prefixes corresponding to powers of 1000: a 1- terabyte (TB) drive has a capacity of 1,000 gigabytes , where 1 gigabyte = 1 000 megabytes = 1 000 000 kilobytes (1 million) = 1 000 000 000 bytes (1 billion). Typically, some of an HDD's capacity is unavailable to the user because it is used by the file system and the computer operating system , and possibly inbuilt redundancy for error correction and recovery. There can be confusion regarding storage capacity, since capacities are stated in decimal gigabytes (powers of 1000) by HDD manufacturers, whereas

4902-477: Is stored either in the lead-in area of the CD, where there are roughly five kilobytes of space available or in the subcode channels R to W on the disc, which can store about 31 megabytes. Compact Disc + Graphics is a special audio compact disc that contains graphics data in addition to the audio data on the disc. The disc can be played on a regular audio CD player, but when played on a special CD+G player, it can output

5016-408: Is used: a change from either pit to land or land to pit indicates a 1, while no change indicates a series of 0s. There must be at least two, and no more than ten 0s between each 1, which is defined by the length of the pit. This, in turn, is decoded by reversing the eight-to-fourteen modulation used in mastering the disc, and then reversing the cross-interleaved Reed–Solomon coding , finally revealing

5130-633: The Apple Macintosh . Many Macintosh computers made between 1986 and 1998 featured a SCSI port on the back, making external expansion simple. Older compact Macintosh computers did not have user-accessible hard drive bays (indeed, the Macintosh 128K , Macintosh 512K , and Macintosh Plus did not feature a hard drive bay at all), so on those models, external SCSI disks were the only reasonable option for expanding upon any internal storage. HDD improvements have been driven by increasing areal density , listed in

5244-477: The Compact Disc + Graphics (CD+G) format. Like CD+G, CD+EG uses basic CD-ROM features to display text and video information in addition to the music being played. This extra data is stored in subcode channels R-W. Very few CD+EG discs have been published. Super Audio CD (SACD) is a high-resolution, read-only optical audio disc format that was designed to provide higher-fidelity digital audio reproduction than

5358-512: The Red Book . Introduced in 1999, it was developed by Sony and Philips, the same companies that created the Red Book . SACD was in a format war with DVD-Audio , but neither has replaced audio CDs. The SACD standard is referred to as the Scarlet Book standard. Titles in the SACD format can be issued as hybrid discs; these discs contain the SACD audio stream as well as a standard audio CD layer which

5472-564: The Shannon limit and thus provide the highest storage density available. Typical hard disk drives attempt to "remap" the data in a physical sector that is failing to a spare physical sector provided by the drive's "spare sector pool" (also called "reserve pool"), while relying on the ECC to recover stored data while the number of errors in a bad sector is still low enough. The S.M.A.R.T ( Self-Monitoring, Analysis and Reporting Technology ) feature counts

5586-752: The vinyl revival . During the 2010s, the increasing popularity of solid-state media and music streaming services caused automakers to remove automotive CD players in favor of minijack auxiliary inputs, wired connections to USB devices and wireless Bluetooth connections. Automakers viewed CD players as using up valuable space and taking up weight which could be reallocated to more popular features, like large touchscreens. By 2021, only Lexus and General Motors were still including CD players as standard equipment with certain vehicles. CDs continued to be strong in some markets such as Japan where 132 million units were produced in 2019. The decline in CD sales has slowed in recent years; in 2021, CD sales increased in

5700-712: The 120 mm size was adopted. The adoption of EFM in June 1980 allowed 30 percent more playing time that would have resulted in 97 minutes for 120 mm diameter or 74 minutes for a disc as small as 100 millimetres (3.9 in). Instead, the information density was lowered by 30 percent to keep the playing time at 74 minutes. The 120 mm diameter has been adopted by subsequent formats, including Super Audio CD , DVD , HD DVD , and Blu-ray Disc. The 80-millimetre (3.1 in) diameter discs (" Mini CDs ") can hold up to 24 minutes of music or 210 MiB. The logical format of an audio CD (officially Compact Disc Digital Audio or CD-DA)

5814-489: The 1990s, quickly outselling all other audio formats in the United States by 1991, ending the market dominance of the phonograph record and the cassette tape . By 2000, the CD accounted for 92.3% of the entire market share in regard to US music sales . The CD is considered the last dominant audio format of the album era , as the rise of MP3 , iTunes , cellular ringtones , and other downloadable music formats in

SECTION 50

#1732876946711

5928-601: The 2000s designed as successors to the CD: the Super Audio CD (SACD) and DVD-Audio . However neither of these were adopted partly due to increased relevance of digital (virtual) music and the apparent lack of audible improvements in audio quality to most human ears. These effectively extended the CD's longevity in the music market. With the advent and popularity of Internet-based distribution of files in lossy-compressed audio formats such as MP3 , sales of CDs began to decline in

6042-502: The 2000s. For example, between 2000 and 2008, despite overall growth in music sales and one anomalous year of increase, major-label CD sales declined overall by 20%. Despite rapidly declining sales year-over-year, the pervasiveness of the technology lingered for a time, with companies placing CDs in pharmacies, supermarkets, and filling station convenience stores to target buyers less likely to be able to use Internet-based distribution. In 2012, CDs and DVDs made up only 34% of music sales in

6156-405: The CD was the second optical disc technology to be invented, after the much larger LaserDisc (LD). By 2007, 200 billion CDs (including audio CDs, CD-ROMs and CD-Rs) had been sold worldwide. Standard CDs have a diameter of 120 mm (4.7 in), and are designed to hold up to 74 minutes of uncompressed stereo digital audio or about 650   MiB ( 681,574,400  bytes) of data. Capacity

6270-467: The CD's introduction, Immink and Joseph Braat presented the first experiments with erasable compact discs during the 73rd AES Convention . In June 1985, the computer-readable CD-ROM (read-only memory) and, in 1990, recordable CD-R discs were introduced. Recordable CDs became an alternative to tape for recording and distributing music and could be duplicated without degradation in sound quality. Other newer video formats such as DVD and Blu-ray use

6384-472: The DAC. Even when using high-precision components, this approach was prone to decoding errors. Another issue was jitter , a time-related defect. Confronted with the instability of DACs, manufacturers initially turned to increasing the number of bits in the DAC and using several DACs per audio channel, averaging their output. This increased the cost of CD players but did not solve the core problem. A breakthrough in

6498-520: The HDD, but allow higher recording densities to be employed without causing uncorrectable errors, resulting in much larger storage capacity. For example, a typical 1  TB hard disk with 512-byte sectors provides additional capacity of about 93  GB for the ECC data. In the newest drives, as of 2009 , low-density parity-check codes (LDPC) were supplanting Reed–Solomon; LDPC codes enable performance close to

6612-477: The IBM GV (Gulliver) drive, invented at IBM's UK Hursley Labs, became IBM's most licensed electro-mechanical invention of all time, the actuator and filtration system being adopted in the 1980s eventually for all HDDs, and still universal nearly 40 years and 10 billion arms later. Like the first removable pack drive, the first "Winchester" drives used platters 14 inches (360 mm) in diameter. In 1978, IBM introduced

6726-448: The US for the first time since 2004, with Axios citing its rise to "young people who are finding they like hard copies of music in the digital age". It came at the same time as both vinyl and cassette reached sales levels not seen in 30 years. The RIAA reported that CD revenue made a dip in 2022, before increasing again in 2023 and overtook downloading for the first time in over a decade. In

6840-517: The US, 33.4 million CD albums were sold in the year 2022. In France in 2023, 10.5 million CDs were sold, almost double that of vinyl, but both of them represented generated 12% each of the French music industry revenues. Sony and Philips received praise for the development of the compact disc from professional organizations. These awards include: A CD is made from 1.2-millimetre (0.047 in) thick, polycarbonate plastic, and weighs 14–33 grams. From

6954-665: The United States. By 2015, only 24% of music in the United States was purchased on physical media, two thirds of this consisting of CDs; however, in the same year in Japan, over 80% of music was bought on CDs and other physical formats. In 2018, U.S. CD sales were 52 million units—less than 6% of the peak sales volume in 2000. In the UK, 32 million units were sold, almost 100 million fewer than in 2008. In 2018, Best Buy announced plans to decrease their focus on CD sales, however, while continuing to sell records, sales of which are growing during

SECTION 60

#1732876946711

7068-540: The Windows-only version of the QuickPlay software can be run. This occurs regardless of whether QuickPlay is launched externally (via a notebook button or IR remote button) when the notebook is off, or when Windows Vista is running. QuickPlay software has been replaced by the HP MediaSmart Software on HP Desktops and Notebook PC HP QuickPlay should not be confused with the QuickPlay project hosted by SourceForge . This multimedia software -related article

7182-443: The arrowhead and radially inward on the other produces the tangential force . If the magnetic field were uniform, each side would generate opposing forces that would cancel each other out. Therefore, the surface of the magnet is half north pole and half south pole, with the radial dividing line in the middle, causing the two sides of the coil to see opposite magnetic fields and produce forces that add instead of canceling. Currents along

7296-406: The bottom of the polycarbonate layer. The change in height between pits and lands results in a difference in the way the light is reflected. Because the pits are indented into the top layer of the disc and are read through the transparent polycarbonate base, the pits form bumps when read. The laser hits the disc, casting a circle of light wider than the modulated spiral track reflecting partially from

7410-447: The case of embedded servo, otherwise known as sector servo technology). The servo feedback optimizes the signal-to-noise ratio of the GMR sensors by adjusting the voice coil motor to rotate the arm. A more modern servo system also employs milli and/or micro actuators to more accurately position the read/write heads. The spinning of the disks uses fluid-bearing spindle motors. Modern disk firmware

7524-451: The center of the disc and proceeds toward the edge, which allows adaptation to the different sizes available. Standard CDs are available in two sizes. By far, the most common is 120 millimetres (4.7 in) in diameter, with a 74-, 80, 90, or 99-minute audio capacity and a 650, 700, 800, or 870 MiB (737,280,000-byte) data capacity. Discs are 1.2 millimetres (0.047 in) thick, with a 15 millimetres (0.59 in) center hole. The size of

7638-407: The center outward, components are: the center spindle hole (15 mm), the first-transition area (clamping ring), the clamping area (stacking ring), the second-transition area (mirror band), the program (data) area, and the rim. The inner program area occupies a radius from 25 to 58 mm. A thin layer of aluminum or, more rarely, gold is applied to the surface, making it reflective. The metal

7752-450: The compact disc has been credited to the cooperation between Philips and Sony, which together agreed upon and developed compatible hardware. The unified design of the compact disc allowed consumers to purchase any disc or player from any company and allowed the CD to dominate the at-home music market unchallenged. In 1974, Lou Ottens, director of the audio division of Philips, started a small group to develop an analog optical audio disc with

7866-441: The connection between the drive and the host. The rate of areal density advancement was similar to Moore's law (doubling every two years) through 2010: 60% per year during 1988–1996, 100% during 1996–2003 and 30% during 2003–2010. Speaking in 1997, Gordon Moore called the increase "flabbergasting", while observing later that growth cannot continue forever. Price improvement decelerated to −12% per year during 2010–2017, as

7980-423: The diagonal of an audio cassette. Heitaro Nakajima , who developed an early digital audio recorder within Japan's national public broadcasting organization, NHK , in 1970, became general manager of Sony's audio department in 1971. In 1973, his team developed a digital PCM adaptor that made audio recordings using a Betamax video recorder. After this, in 1974 the leap to storing digital audio on an optical disc

8094-449: The disks; the stator windings are fixed in place. Opposite the actuator at the end of the head support arm is the read-write head; thin printed-circuit cables connect the read-write heads to amplifier electronics mounted at the pivot of the actuator. The head support arm is very light, but also stiff; in modern drives, acceleration at the head reaches 550 g . The actuator is a permanent magnet and moving coil motor that swings

8208-467: The earlier IBM disk drives used only two read/write heads per arm, the 1301 used an array of 48 heads (comb), each array moving horizontally as a single unit, one head per surface used. Cylinder-mode read/write operations were supported, and the heads flew about 250 micro-inches (about 6 μm) above the platter surface. Motion of the head array depended upon a binary adder system of hydraulic actuators which assured repeatable positioning. The 1301 cabinet

8322-508: The first few years of its existence, the CD was a medium used purely for audio. In 1988, the Yellow Book CD-ROM standard was established by Sony and Philips, which defined a non-volatile optical data computer data storage medium using the same physical format as audio compact discs, readable by a computer with a CD-ROM drive. Video CD (VCD, View CD, and Compact Disc digital video) is a standard digital format for storing video media on

8436-458: The first four UK albums by the Beatles were released in mono on compact disc. The growing acceptance of the CD in 1983 marks the beginning of the popular digital audio revolution. It was enthusiastically received, especially in the early-adopting classical music and audiophile communities, and its handling quality received particular praise. As the price of players gradually came down, and with

8550-804: The format included: The first artist to sell a million copies on CD was Dire Straits , with their 1985 album Brothers in Arms . One of the first CD markets was devoted to reissuing popular music whose commercial potential was already proven. The first major artist to have their entire catalog converted to CD was David Bowie , whose first fourteen studio albums (up to Scary Monsters (and Super Creeps) ) of (then) sixteen were made available by RCA Records in February 1985, along with four greatest hits albums; his fifteenth and sixteenth albums ( Let's Dance and Tonight , respectively) had already been issued on CD by EMI Records in 1983 and 1984, respectively. On 26 February 1987,

8664-443: The growth of areal density slowed. The rate of advancement for areal density slowed to 10% per year during 2010–2016, and there was difficulty in migrating from perpendicular recording to newer technologies. As bit cell size decreases, more data can be put onto a single drive platter. In 2013, a production desktop 3 TB HDD (with four platters) would have had an areal density of about 500 Gbit/in which would have amounted to

8778-416: The heads to the desired position. A metal plate supports a squat neodymium–iron–boron (NIB) high-flux magnet . Beneath this plate is the moving coil, often referred to as the voice coil by analogy to the coil in loudspeakers , which is attached to the actuator hub, and beneath that is a second NIB magnet, mounted on the bottom plate of the motor (some drives have only one magnet). The voice coil itself

8892-522: The hole was chosen by Joop Sinjou and based on a Dutch 10-cent coin: a dubbeltje . Philips/Sony patented the physical dimensions. The official Philips history says the capacity was specified by Sony executive Norio Ohga to be able to contain the entirety of Beethoven's Ninth Symphony on one disc. This is a myth according to Kees Immink , as the EFM code format had not yet been decided in December 1979, when

9006-505: The introduction of the portable Discman , the CD began to gain popularity in the larger popular and rock music markets. With the rise in CD sales, pre-recorded cassette tape sales began to decline in the late 1980s; CD sales overtook cassette sales in the early 1990s. In 1988, 400 million CDs were manufactured by 50 pressing plants around the world. Early CD players employed binary-weighted digital-to-analog converters (DAC), which contained individual electrical components for each bit of

9120-476: The label side of the disc. Scratches on the clear side can be repaired by refilling them with similar refractive plastic or by careful polishing. The edges of CDs are sometimes incompletely sealed, allowing gases and liquids to enter the CD and corrode the metal reflective layer and/or interfere with the focus of the laser on the pits, a condition known as disc rot . The fungus Geotrichum candidum has been found—under conditions of high heat and humidity—to consume

9234-510: The lands and partially from the top of any bumps where they are present. As the laser passes over a pit (bump), its height means that the round trip path of the light reflected from its peak is 1/2 wavelength out of phase with the light reflected from the land around it. This is because the height of a bump is around 1/4 of the wavelength of the light used, so the light falls 1/4 out of phase before reflection and another 1/4 wavelength out of phase after reflection. This causes partial cancellation of

9348-427: The largest hard drive had a capacity of 15 TB, while the largest capacity SSD had a capacity of 100 TB. As of 2018 , HDDs were forecast to reach 100 TB capacities around 2025, but as of 2019 , the expected pace of improvement was pared back to 50 TB by 2026. Smaller form factors, 1.8-inches and below, were discontinued around 2010. The cost of solid-state storage (NAND), represented by Moore's law ,

9462-419: The laser's reflection from the surface. By measuring the reflected intensity change with a photodiode , a modulated signal is read back from the disc. To accommodate the spiral pattern of data, the laser is placed on a mobile mechanism within the disc tray of any CD player. This mechanism typically takes the form of a sled that moves along a rail. The sled can be driven by a worm gear or linear motor . Where

9576-428: The late 1980s culminated in development of the 1-bit DAC , which converts high-resolution low-frequency digital input signal into a lower-resolution high-frequency signal that is mapped to voltages and then smoothed with an analog filter. The temporary use of a lower-resolution signal simplified circuit design and improved efficiency, which is why it became dominant in CD players starting from the early 1990s. Philips used

9690-444: The magnetization of the material passing immediately under it. In modern drives, there is one head for each magnetic platter surface on the spindle, mounted on a common arm. An actuator arm (or access arm) moves the heads on an arc (roughly radially) across the platters as they spin, allowing each head to access almost the entire surface of the platter as it spins. The arm is moved using a voice coil actuator or, in some older designs,

9804-422: The manufacturing of the read/write heads to increase the strength of the magnetic field created by the heads. In 2004, a higher-density recording media was introduced, consisting of coupled soft and hard magnetic layers. So-called exchange spring media magnetic storage technology, also known as exchange coupled composite media , allows good writability due to the write-assist nature of the soft layer. However,

9918-557: The mid-2000s ended the decade-long dominance of the CD. The format was later adapted (as CD-ROM ) for general purpose data storage and initially could hold much more data than a personal computer hard disk drive . Several other formats were further derived, both pre-pressed and blank user writable, including write-once audio and data storage ( CD-R ), rewritable media ( CD-RW ), Video CD (VCD), Super Video CD (SVCD), Photo CD , Picture CD , Compact Disc-Interactive ( CD-i ), Enhanced Music CD , and Super Audio CD (SACD) which may have

10032-420: The most commonly used operating systems report capacities in powers of 1024, which results in a smaller number than advertised. Performance is specified as the time required to move the heads to a track or cylinder (average access time), the time it takes for the desired sector to move under the head (average latency , which is a function of the physical rotational speed in revolutions per minute ), and finally,

10146-559: The norm in most computer installations and reached capacities of 300 megabytes by the early 1980s. Non-removable HDDs were called "fixed disk" drives. In 1963, IBM introduced the 1302, with twice the track capacity and twice as many tracks per cylinder as the 1301. The 1302 had one (for Model 1) or two (for Model 2) modules, each containing a separate comb for the first 250 tracks and the last 250 tracks. Some high-performance HDDs were manufactured with one head per track, e.g. , Burroughs B-475 in 1964, IBM 2305 in 1970, so that no time

10260-530: The platters, increasing areal density. Normally hard drive recording heads have a pole called a main pole that is used for writing to the platters, and adjacent to this pole is an air gap and a shield. The write coil of the head surrounds the pole. The STO device is placed in the air gap between the pole and the shield to increase the strength of the magnetic field created by the pole; FC-MAMR technically doesn't use microwaves, but uses technology employed in MAMR. The STO has

10374-533: The polycarbonate plastic and aluminium found in CDs. The data integrity of compact discs can be measured using surface error scanning , which can measure the rates of different types of data errors, known as C1 , C2 , CU and extended (finer-grain) error measurements known as E11 , E12 , E21 , E22 , E31 and E32 , of which higher rates indicate a possibly damaged or unclean data surface, low media quality, deteriorating media and recordable media written to by

10488-502: The prior art by Optophonie and James Russell, the information on the disc is read from a reflective layer using a laser as a light source through a protective substrate. Prototypes were developed by Philips and Sony independently in the late 1970s. Although originally dismissed by Philips Research management as a trivial pursuit, the CD became the primary focus for Philips as the LaserDisc format struggled. In 1979, Sony and Philips set up

10602-538: The raw data stored on the disc. These encoding techniques (defined in the Red Book ) were originally designed for CD Digital Audio , but they later became a standard for almost all CD formats (such as CD-ROM ). CDs are susceptible to damage during handling and from environmental exposure. Pits are much closer to the label side of a disc, enabling defects and contaminants on the clear side to be out of focus during playback. Consequently, CDs are more likely to suffer damage on

10716-416: The revenue of hard disk drives as of 2017 . Though SSDs have four to nine times higher cost per bit, they are replacing HDDs in applications where speed, power consumption, small size, high capacity and durability are important. As of 2019 , the cost per bit of SSDs is falling, and the price premium over HDDs has narrowed. The primary characteristics of an HDD are its capacity and performance . Capacity

10830-432: The same physical geometry as CD, and most DVD and Blu-ray players are backward compatible with audio CDs. CD sales in the United States peaked by 2000. By the early 2000s, the CD player had largely replaced the audio cassette player as standard equipment in new automobiles, with 2010 being the final model year for any car in the United States to have a factory-equipped cassette player. Two new formats were marketed in

10944-427: The speed at which the data is transmitted (data rate). The two most common form factors for modern HDDs are 3.5-inch, for desktop computers, and 2.5-inch, primarily for laptops. HDDs are connected to systems by standard interface cables such as SATA (Serial ATA), USB , SAS ( Serial Attached SCSI ), or PATA (Parallel ATA) cables. The first production IBM hard disk drive, the 350 disk storage , shipped in 1957 as

11058-438: The stack of disk platters when the drive was powered down. Instead, the heads were allowed to "land" on a special area of the disk surface upon spin-down, "taking off" again when the disk was later powered on. This greatly reduced the cost of the head actuator mechanism, but precluded removing just the disks from the drive as was done with the disk packs of the day. Instead, the first models of "Winchester technology" drives featured

11172-503: The standard in 1996. Philips coined the term compact disc in line with another audio product, the Compact Cassette , and contributed the general manufacturing process , based on video LaserDisc technology. Philips also contributed eight-to-fourteen modulation (EFM), while Sony contributed the error-correction method, CIRC, which offers resilience to defects such as scratches and fingerprints. The Compact Disc Story , told by

11286-447: The swing arm actuator design to make possible the compact form factors of modern HDDs. As the 1980s began, HDDs were a rare and very expensive additional feature in PCs, but by the late 1980s, their cost had been reduced to the point where they were standard on all but the cheapest computers. Most HDDs in the early 1980s were sold to PC end users as an external, add-on subsystem. The subsystem

11400-439: The table above. Applications expanded through the 2000s, from the mainframe computers of the late 1950s to most mass storage applications including computers and consumer applications such as storage of entertainment content. In the 2000s and 2010s, NAND began supplanting HDDs in applications requiring portability or high performance. NAND performance is improving faster than HDDs, and applications for HDDs are eroding. In 2018,

11514-400: The thermal stability is determined only by the hardest layer and not influenced by the soft layer. Flux control MAMR (FC-MAMR) allows a hard drive to have increased recording capacity without the need for new hard disk drive platter materials. MAMR hard drives have a microwave generating spin torque generator (STO) on the read/write heads which allows physically smaller bits to be recorded to

11628-475: The top and bottom of the coil produce radial forces that do not rotate the head. The HDD's electronics controls the movement of the actuator and the rotation of the disk and transfers data to/from a disk controller . Feedback of the drive electronics is accomplished by means of special segments of the disk dedicated to servo feedback. These are either complete concentric circles (in the case of dedicated servo technology) or segments interspersed with real data (in

11742-491: The total number of errors in the entire HDD fixed by ECC (although not on all hard drives as the related S.M.A.R.T attributes "Hardware ECC Recovered" and "Soft ECC Correction" are not consistently supported), and the total number of performed sector remappings, as the occurrence of many such errors may predict an HDD failure . The "No-ID Format", developed by IBM in the mid-1990s, contains information about which sectors are bad and where remapped sectors have been located. Only

11856-433: The usual filtered air. Since turbulence and friction are reduced, higher areal densities can be achieved due to using a smaller track width, and the energy dissipated due to friction is lower as well, resulting in a lower power draw. Furthermore, more platters can be fit into the same enclosure space, although helium gas is notoriously difficult to prevent escaping. Thus, helium drives are completely sealed and do not have

11970-499: The volume of storage produced ( exabytes per year) for servers. Though production is growing slowly (by exabytes shipped ), sales revenues and unit shipments are declining, because solid-state drives (SSDs) have higher data-transfer rates, higher areal storage density, somewhat better reliability, and much lower latency and access times. The revenues for SSDs, most of which use NAND flash memory , slightly exceeded those for HDDs in 2018. Flash storage products had more than twice

12084-420: The windings (the pitch ) is 1.6 μm (measured center-to-center, not between the edges). When playing an audio CD, a motor within the CD player spins the disc to a scanning velocity of 1.2–1.4 m/s ( constant linear velocity , CLV)—equivalent to approximately 500 RPM at the inside of the disc, and approximately 200 RPM at the outside edge. The track on the CD begins at the inside and spirals outward so

12198-520: Was about the size of three large refrigerators placed side by side, storing the equivalent of about 21 million eight-bit bytes per module. Access time was about a quarter of a second. Also in 1962, IBM introduced the model 1311 disk drive, which was about the size of a washing machine and stored two million characters on a removable disk pack . Users could buy additional packs and interchange them as needed, much like reels of magnetic tape . Later models of removable pack drives, from IBM and others, became

12312-474: Was chosen because it is half the vertical and half the horizontal resolution of the NTSC video. 352×288 is a similarly one-quarter PAL/SECAM resolution. This approximates the (overall) resolution of an analog VHS tape, which, although it has double the number of (vertical) scan lines, has a much lower horizontal resolution. Hard disk drive A hard disk drive ( HDD ), hard disk , hard drive , or fixed disk

12426-459: Was easily made. Sony first publicly demonstrated an optical digital audio disc in September 1976. A year later, in September 1977, Sony showed the press a 30 cm (12 in) disc that could play an hour of digital audio (44,100 Hz sampling rate and 16-bit resolution) using modified frequency modulation encoding. In September 1978, the company demonstrated an optical digital audio disc with

12540-461: Was granted a patent in 1970. Following litigation, Sony and Philips licensed Russell's patents for recording in 1988. It is debatable whether Russell's concepts, patents, and prototypes instigated and in some measure influenced the compact disc's design. The compact disc is an evolution of LaserDisc technology, where a focused laser beam is used that enables the high information density required for high-quality digital audio signals. Unlike

12654-427: Was lost physically moving the heads to a track and the only latency was the time for the desired block of data to rotate into position under the head. Known as fixed-head or head-per-track disk drives, they were very expensive and are no longer in production. In 1973, IBM introduced a new type of HDD code-named " Winchester ". Its primary distinguishing feature was that the disk heads were not withdrawn completely from

12768-503: Was not sold under the drive manufacturer's name but under the subsystem manufacturer's name such as Corvus Systems and Tallgrass Technologies , or under the PC system manufacturer's name such as the Apple ProFile . The IBM PC/XT in 1983 included an internal 10 MB HDD, and soon thereafter, internal HDDs proliferated on personal computers. External HDDs remained popular for much longer on

12882-509: Was published on 1 March 1979. A week later, on 8 March, Philips publicly demonstrated a prototype of an optical digital audio disc at a press conference called "Philips Introduce Compact Disc" in Eindhoven , Netherlands. Sony executive Norio Ohga , later CEO and chairman of Sony, and Heitaro Nakajima were convinced of the format's commercial potential and pushed further development despite widespread skepticism. In 1979, Sony and Philips set up

12996-408: Was the norm. As of November 2019 , the platters in most consumer-grade HDDs spin at 5,400 or 7,200 rpm. Information is written to and read from a platter as it rotates past devices called read-and-write heads that are positioned to operate very close to the magnetic surface, with their flying height often in the range of tens of nanometers. The read-and-write head is used to detect and modify

#710289