An IATA airport code , also known as an IATA location identifier , IATA station code , or simply a location identifier , is a three-letter geocode designating many airports and metropolitan areas around the world, defined by the International Air Transport Association (IATA). The characters prominently displayed on baggage tags attached at airport check-in desks are an example of a way these codes are used.
76-512: Pullman–Moscow Regional Airport ( IATA : PUW , ICAO : KPUW , FAA LID : PUW ) is a public airport in the northwest United States , located in Pullman, Washington , four miles (6 km) west of Moscow, Idaho . The airport is near State Route 270 , and has a single 7,101-foot (2,164 m) runway , headed northeast–southwest (5/23), which entered service in October 2019. The former runway (6/24)
152-443: A runway is a "defined rectangular area on a land aerodrome prepared for the landing and takeoff of aircraft ". Runways may be a human-made surface (often asphalt , concrete , or a mixture of both) or a natural surface ( grass , dirt , gravel , ice , sand or salt ). Runways, taxiways and ramps , are sometimes referred to as "tarmac", though very few runways are built using tarmac . Takeoff and landing areas defined on
228-411: A windsock beside a landing strip. Types of runway safety incidents include: The choice of material used to construct the runway depends on the use and the local ground conditions. For a major airport, where the ground conditions permit, the most satisfactory type of pavement for long-term minimum maintenance is concrete . Although certain airports have used reinforcement in concrete pavements, this
304-480: A 7 will indicate 7,000 ft (2,134 m) remaining. The runway threshold is marked by a line of green lights. [REDACTED] There are three types of runways: Waterways may be unmarked or marked with buoys that follow maritime notation instead. For runways and taxiways that are permanently closed, the lighting circuits are disconnected. The runway threshold, runway designation, and touchdown markings are obliterated and yellow "Xs" are placed at each end of
380-493: A few hundred combinations; a three-letter system of airport codes was implemented. This system allowed for 17,576 permutations, assuming all letters can be used in conjunction with each other. Since the U.S. Navy reserved "N" codes, and to prevent confusion with Federal Communications Commission broadcast call signs , which begin with "W" or "K", the airports of certain U.S. cities whose name begins with one of these letters had to adopt "irregular" airport codes: This practice
456-479: A landing site for the Space Shuttle . Takeoff and landing distances available are given using one of the following terms: There are standards for runway markings. There are runway markings and signs on most large runways. Larger runways have a distance remaining sign (black box with white numbers). This sign uses a single number to indicate the remaining distance of the runway in thousands of feet. For example,
532-567: A larger queueing area, a TSA PreCheck entrance, and additional screening equipment. The public airport shares the runway with a fixed-base operator , Interstate Aviation, which conducts chartered air service and flight school. Local engineering firm Schweitzer Engineering Laboratories owns and operates private hangars at the airport. For the 12-month period ending January 1, 2014, the airport had 29,350 aircraft operations, an average of 80 per day: 85% general aviation , 14% scheduled commercial , 1% air taxi , and <1% military . Occasionally,
608-550: A new airport is built, replacing the old one, leaving the city's new "major" airport (or the only remaining airport) code to no longer correspond with the city's name. The original airport in Nashville, Tennessee, was built in 1936 as part of the Works Progress Administration and called Berry Field with the designation, BNA. A new facility known as Nashville International Airport was built in 1987 but still uses BNA. This
684-500: A new baggage carousel, new restaurant and outdoor spaces, as well as a separate space for university charters. It was developed alongside runway adjustments that had taken seven years to plan; an expansion with an additional 5,000 square feet (460 m) opened on August 15, 2024. Construction of the new terminal began in August 2022 and was completed in December 2023. The security area has
760-542: A periodic basis. Fields with very low traffic of light planes may use a sod surface. Some runways make use of salt flats. For pavement designs, borings are taken to determine the subgrade condition, and based on the relative bearing capacity of the subgrade, the specifications are established. For heavy-duty commercial aircraft, the pavement thickness, no matter what the top surface, varies from 10 to 48 in (25 to 122 cm), including subgrade. Airport pavements have been designed by two methods. The first, Westergaard ,
836-406: A single security checkpoint and glass walls. The waiting area occupied all space beyond the checkpoint but was not commonly used for waiting, as most passengers passed through the security checkpoint immediately before boarding. Both passenger gates were ground-level doors to the tarmac ; passengers boarded via the fold-down aircraft-door stairs, or airstairs (for larger charter aircraft). Gate 1 on
SECTION 10
#1732883441651912-415: A third parallel runway was opened at Phoenix Sky Harbor International Airport in 2000 to the south of existing 8R/26L—rather than confusingly becoming the "new" 8R/26L it was instead designated 7R/25L, with the former 8R/26L becoming 7L/25R and 8L/26R becoming 8/26. Suffixes may also be used to denote special use runways. Airports that have seaplane waterways may choose to denote the waterway on charts with
988-499: Is GSN and its IATA code is SPN, and some coincide with IATA codes of non-U.S. airports. Canada's unusual codes—which bear little to no similarity with any conventional abbreviation to the city's name—such as YUL in Montréal , and YYZ in Toronto , originated from the two-letter codes used to identify weather reporting stations in the 1930s. The letters preceding the two-letter code follow
1064-445: Is an extrapolation of the original test results, which are not applicable to modern aircraft pavements or to modern aircraft landing gear . Some designs were made by a mixture of these two design theories. A more recent method is an analytical system based on the introduction of vehicle response as an important design parameter. Essentially it takes into account all factors, including the traffic conditions, service life, materials used in
1140-463: Is based on the assumption that the pavement is an elastic plate supported on a heavy fluid base with a uniform reaction coefficient known as the K value . Experience has shown that the K values on which the formula was developed are not applicable for newer aircraft with very large footprint pressures. The second method is called the California bearing ratio and was developed in the late 1940s. It
1216-399: Is considered to have the longest takeoff distance of the more common aircraft types and has set the standard for runway lengths of larger international airports. At sea level , 3,200 m (10,500 ft) can be considered an adequate length to land virtually any aircraft. For example, at O'Hare International Airport , when landing simultaneously on 4L/22R and 10/28 or parallel 9R/27L, it
1292-574: Is different from the name in English, yet the airport code represents only the English name. Examples include: Due to scarcity of codes, some airports are given codes with letters not found in their names: The use of 'X' as a filler letter is a practice to create three-letter identifiers when more straightforward options were unavailable: Some airports in the United States retained their NWS ( National Weather Service ) codes and simply appended an X at
1368-418: Is generally found to be unnecessary, with the exception of expansion joints across the runway where a dowel assembly, which permits relative movement of the concrete slabs, is placed in the concrete. Where it can be anticipated that major settlements of the runway will occur over the years because of unstable ground conditions, it is preferable to install asphalt concrete surface, as it is easier to patch on
1444-513: Is in conjunction to rules aimed to avoid confusion that seem to apply in the United States, which state that "the first and second letters or second and third letters of an identifier may not be duplicated with less than 200 nautical miles separation." Thus, Washington, D.C. area's three airports all have radically different codes: IAD for Washington–Dulles , DCA for Washington–Reagan (District of Columbia Airport), and BWI for Baltimore (Baltimore–Washington International, formerly BAL). Since HOU
1520-408: Is included for all ICAO and some U.S. military airports (such as Edwards Air Force Base ). However, most U.S. civil aviation airports drop the leading zero as required by FAA regulation. This also includes some military airfields such as Cairns Army Airfield . This American anomaly may lead to inconsistencies in conversations between American pilots and controllers in other countries. It
1596-454: Is most nearly aligned with the wind. Airports with one runway are often constructed to be aligned with the prevailing wind . Compiling a wind rose is one of the preliminary steps taken in constructing airport runways. Wind direction is given as the direction the wind is coming from : a plane taking off from runway 09 faces east, into an "east wind" blowing from 090°. Originally in the 1920s and 1930s, airports and air bases (particularly in
SECTION 20
#17328834416511672-532: Is not followed outside the United States: In addition, since three letter codes starting with Q are widely used in radio communication, cities whose name begins with "Q" also had to find alternate codes, as in the case of: IATA codes should not be confused with the FAA identifiers of U.S. airports. Most FAA identifiers agree with the corresponding IATA codes, but some do not, such as Saipan , whose FAA identifier
1748-567: Is routine for arrivals from East Asia , which would normally be vectored for 4L/22R (2,300 m (7,546 ft)) or 9R/27L (2,400 m (7,874 ft)) to request 28R (4,000 m (13,123 ft)). It is always accommodated, although occasionally with a delay. Another example is that the Luleå Airport in Sweden was extended to 3,500 m (11,483 ft) to allow any fully loaded freight aircraft to take off. These distances are also influenced by
1824-451: Is slow, runway designation changes are uncommon, and not welcomed, as they require an accompanying change in aeronautical charts and descriptive documents. When a runway designation does change, especially at major airports, it is often done at night, because taxiway signs need to be changed and the numbers at each end of the runway need to be repainted to the new runway designators. In July 2009 for example, London Stansted Airport in
1900-465: Is the sole commercial airline serving the airport, flying Embraer 175 jet aircraft. Its limited service to Pullman–Moscow began 43 years ago in December 1981 with Fairchild F-27 aircraft (Friday & Sunday), and daily service (along with Lewiston ) in March 1983, on F-27 and Metroliner aircraft. Service to Portland , Spokane , and Boise was ended in 1997. Horizon (later folded into
1976-416: Is used for William P. Hobby Airport , the new Houston–Intercontinental became IAH. The code BKK was originally assigned to Bangkok–Don Mueang and was later transferred to Suvarnabhumi Airport , while the former adopted DMK. The code ISK was originally assigned to Gandhinagar Airport (Nashik's old airport) and later on transferred to Ozar Airport (Nashik's current airport). Shanghai–Hongqiao retained
2052-459: Is usually adequate for aircraft weights below approximately 100,000 kg (220,000 lb). Larger aircraft including widebodies will usually require at least 2,400 m (7,900 ft) at sea level. International widebody flights, which carry substantial amounts of fuel and are therefore heavier, may also have landing requirements of 3,200 m (10,500 ft) or more and takeoff requirements of 4,000 m (13,000 ft). The Boeing 747
2128-557: Is very common in a country such as Canada for a controller to clear an incoming American aircraft to, for example, runway 04, and the pilot read back the clearance as runway 4. In flight simulation programs those of American origin might apply U.S. usage to airports around the world. For example, runway 05 at Halifax will appear on the program as the single digit 5 rather than 05. Military airbases may include smaller paved runways known as "assault strips" for practice and training next to larger primary runways. These strips eschew
2204-561: The Canadian transcontinental railroads were built, each station was assigned its own two-letter Morse code : When the Canadian government established airports, it used the existing railway codes for them as well. If the airport had a weather station, authorities added a "Y" to the front of the code, meaning "Yes" to indicate it had a weather station or some other letter to indicate it did not. When international codes were created in cooperation with
2280-471: The list of Amtrak station codes . Airport codes arose out of the convenience that the practice brought pilots for location identification in the 1930s. Initially, pilots in the United States used the two-letter code from the National Weather Service (NWS) for identifying cities. This system became unmanageable for cities and towns without an NWS identifier, and the use of two letters allowed only
2356-724: The Alaska brand) now offers four to five daily scheduled flights to Seattle–Tacoma . Historically, flight schedules had sometimes included a stop at Lewiston, but currently all scheduled flights to Seattle are non-stop. Flights to Boise returned August 2021 with service five times a week; it was suspended in May 2024 and is scheduled to return in August due to a lack of demand outside of the school year. Alaska moved to all-jet service to Pullman–Moscow in November 2022, replacing Q400 turboprops with Embraer 175 jets. Prior to Horizon, Cascade Airways (1969–1986)
Pullman–Moscow Regional Airport - Misplaced Pages Continue
2432-511: The IATA Airline Coding Directory. IATA provides codes for airport handling entities, and for certain railway stations. Alphabetical lists of airports sorted by IATA code are available. A list of railway station codes , shared in agreements between airlines and rail lines such as Amtrak , SNCF , and Deutsche Bahn , is available. However, many railway administrations have their own list of codes for their stations, such as
2508-521: The U.S. For example, several airports in Alaska have scheduled commercial service, such as Stebbins and Nanwalek , which use FAA codes instead of ICAO codes. Thus, neither system completely includes all airports with scheduled service. Some airports are identified in colloquial speech by their IATA code. Examples include LAX and JFK . Runway According to the International Civil Aviation Organization (ICAO),
2584-646: The United Kingdom changed its runway designations from 05/23 to 04/22 during the night. Runway dimensions vary from as small as 245 m (804 ft) long and 8 m (26 ft) wide in smaller general aviation airports, to 5,500 m (18,045 ft) long and 80 m (262 ft) wide at large international airports built to accommodate the largest jets , to the huge 11,917 m × 274 m (39,098 ft × 899 ft) lake bed runway 17/35 at Edwards Air Force Base in California – developed as
2660-461: The United Kingdom) were built in a triangle-like pattern of three runways at 60° angles to each other. The reason was that aviation was only starting, and although it was known that wind affected the runway distance required, not much was known about wind behaviour. As a result, three runways in a triangle-like pattern were built, and the runway with the heaviest traffic would eventually expand into
2736-481: The United States, because "Y" was seldom used in the United States, Canada simply used the weather station codes for its airports, changing the "Y" to a "Z" if it conflicted with an airport code already in use. The result is that most major Canadian airport codes start with "Y" followed by two letters in the city's name (for example, YOW for O tta w a , YWG for W innipe g , YYC for C algar y , or YVR for V ancouve r ), whereas other Canadian airports append
2812-551: The aircraft tyres. To maintain the macrotexturing built into the runway by the grooves, maintenance crews engage in airfield rubber removal or hydrocleaning in order to meet required FAA , or other aviation authority friction levels. Subsurface underdrains help provide extended life and excellent and reliable pavement performance. At the Hartsfield Atlanta, GA airport the underdrains usually consist of trenches 18 in (46 cm) wide and 48 in (120 cm) deep from
2888-514: The airport as a non-hub primary commercial service facility. Aviation at the site began in the 1920s as a grass strip, which was later improved by the Civilian Conservation Corps (CCC) and Works Progress Administration (WPA); the runway was first paved in 1946, and lengthened to 6,800 feet (2,070 m) in 1968 with an 1,800-foot (550 m) extension to the west. Horizon Air (marketed and sold as Alaska Airlines)
2964-465: The airport for jet charters for their intercollegiate athletic teams. Seattle air traffic control , 250 miles (400 km) west, manages commercial traffic for the airport. The nearest major airport is Spokane International , approximately ninety miles (145 km) to the north, and Lewiston is about 25 miles (40 km) south. The Federal Aviation Administration (FAA) National Plan of Integrated Airport Systems for 2017–2021 categorized
3040-512: The airport has accepted Boeing 737 aircraft on Alaska Airlines charter flights. In January 2018, there were 71 aircraft based at this airport: 60 single- engine , 7 multi-engine, 3 jet , and 1 glider . IATA airport code The assignment of these codes is governed by IATA Resolution 763, and it is administered by the IATA's headquarters in Montreal , Canada. The codes are published semi-annually in
3116-440: The airport itself instead of the city it serves, while another code is reserved which refers to the city itself which can be used to search for flights to any of its airports. For instance: Or using a code for the city in one of the major airports and then assigning another code to another airport: When different cities with the same name each have an airport, they need to be assigned different codes. Examples include: Sometimes,
Pullman–Moscow Regional Airport - Misplaced Pages Continue
3192-418: The airport's former name, such as Orlando International Airport 's MCO (for Mc C o y Air Force Base), or Chicago's O'Hare International Airport , which is coded ORD for its original name: Or char d Field. In rare cases, the code comes from the airport's unofficial name, such as Kahului Airport 's OGG (for local aviation pioneer Jimmy H ogg ). In large metropolitan areas, airport codes are often named after
3268-447: The airport's main runway, while the other two runways would be either abandoned or converted into taxiways. Runways are named by a number between 01 and 36, which is generally the magnetic azimuth of the runway's heading in deca degrees . This heading differs from true north by the local magnetic declination . A runway numbered 09 points east (90°), runway 18 is south (180°), runway 27 points west (270°) and runway 36 points to
3344-537: The ambiguity that would result with more than three parallel runways. For example, in Los Angeles, this system results in runways 6L, 6R, 7L, and 7R, even though all four runways are actually parallel at approximately 69°. At Dallas/Fort Worth International Airport , there are five parallel runways, named 17L, 17C, 17R, 18L, and 18R, all oriented at a heading of 175.4°. Occasionally, an airport with only three parallel runways may use different runway identifiers, such as when
3420-491: The code SHA, while the newer Shanghai–Pudong adopted PVG. The opposite was true for Berlin : the airport Berlin–Tegel used the code TXL, while its smaller counterpart Berlin–Schönefeld used SXF; the Berlin Brandenburg Airport has the airport code BER, which is also part of its branding. The airports of Hamburg (HAM) and Hannover (HAJ) are less than 100 nautical miles (190 km) apart and therefore share
3496-411: The construction, and, especially important, the dynamic response of the vehicles using the landing area. Because airport pavement construction is so expensive, manufacturers aim to minimize aircraft stresses on the pavement. Manufacturers of the larger planes design landing gear so that the weight of the plane is supported on larger and more numerous tires. Attention is also paid to the characteristics of
3572-415: The east side of the terminal was used by Horizon Air. A vending machine in the terminal's pre-security area sold canned local Cougar Gold cheese made by the nearby Washington State University. To the west, a significantly larger passenger terminal opened on May 22, 2024, at a cost of $ 92 million to construct. The terminal building is 47,000 square feet (4,400 m) and includes three jet bridges ,
3648-919: The end. Examples include: A lot of minor airfields without scheduled passenger traffic have ICAO codes but not IATA codes, since the four letter codes allow more number of codes, and IATA codes are mainly used for passenger services such as tickets, and ICAO codes by pilots. In the US, such airfields use FAA codes instead of ICAO. There are airports with scheduled service for which there are ICAO codes but not IATA codes, such as Nkhotakota Airport/Tangole Airport in Malawi or Chōfu Airport in Tokyo, Japan. There are also several minor airports in Russia (e.g., Omsukchan Airport ) which lack IATA codes and instead use internal Russian codes for booking. Flights to these airports cannot be booked through
3724-557: The first three letters of the city in which it is located, for instance: The code may also be a combination of the letters in its name, such as: Sometimes the airport code reflects pronunciation, rather than spelling, namely: For many reasons, some airport codes do not fit the normal scheme described above. Some airports, for example, cross several municipalities or regions, and therefore, use codes derived from some of their letters, resulting in: Other airports—particularly those serving cities with multiple airports—have codes derived from
3800-474: The following format: Most large airports in Canada have codes that begin with the letter "Y", although not all "Y" codes are Canadian (for example, YUM for Yuma, Arizona , and YNT for Yantai , China), and not all Canadian airports start with the letter "Y" (for example, ZBF for Bathurst, New Brunswick ). Many Canadian airports have a code that starts with W, X or Z, but none of these are major airports. When
3876-575: The following: According to Transport Canada 's regulations, the runway-edge lighting must be visible for at least 2 mi (3 km). Additionally, a new system of advisory lighting, runway status lights , is currently being tested in the United States. The edge lights must be arranged such that: Typically the lights are controlled by a control tower , a flight service station or another designated authority. Some airports/airfields (particularly uncontrolled ones ) are equipped with pilot-controlled lighting , so that pilots can temporarily turn on
SECTION 50
#17328834416513952-593: The form of " YYZ ", a song by the rock band Rush , which utilizes the Morse code signal as a musical motif. Some airports have started using their IATA codes as brand names , such as Calgary International Airport (YYC) and Vancouver International Airport (YVR). Numerous New Zealand airports use codes that contain the letter Z, to distinguish them from similar airport names in other countries. Examples include HLZ for Hamilton , ZQN for Queenstown , and WSZ for Westport . Predominantly, airport codes are named after
4028-482: The international air booking systems or have international luggage transferred there, and thus, they are booked instead through the airline or a domestic booking system. Several heliports in Greenland have 3-letter codes used internally which might be IATA codes for airports in faraway countries. There are several airports with scheduled service that have not been assigned ICAO codes that do have IATA codes, especially in
4104-496: The lack of designated landing direction. If there is more than one runway pointing in the same direction (parallel runways), each runway is identified by appending left (L), center (C) and right (R) to the end of the runway number to identify its position (when facing its direction)—for example, runways one-five-left (15L), one-five-center (15C), and one-five-right (15R). Runway zero-three-left (03L) becomes runway two-one-right (21R) when used in
4180-432: The landing gear itself, so that adverse effects on the pavement are minimized. Sometimes it is possible to reinforce a pavement for higher loading by applying an overlay of asphaltic concrete or portland cement concrete that is bonded to the original slab. Post-tensioning concrete has been developed for the runway surface. This permits the use of thinner pavements and should result in longer concrete pavement life. Because of
4256-409: The lights when the relevant authority is not available. This avoids the need for automatic systems or staff to turn the lights on at night or in other low visibility situations. This also avoids the cost of having the lighting system on for extended periods. Smaller airports may not have lighted runways or runway markings. Particularly at private airfields for light planes, there may be nothing more than
4332-612: The name of the airport itself, for instance: This is also true with some cities with a single airport (even if there is more than one airport in the metropolitan area of said city), such as BDL for Hartford, Connecticut 's B ra dl ey International Airport or Baltimore's BWI, for B altimore/ W ashington I nternational Airport ; however, the latter also serves Washington, D.C. , alongside Dulles International Airport (IAD, for I nternational A irport D ulles) and Ronald Reagan Washington National Airport (DCA, for D istrict of C olumbia A irport). The code also sometimes comes from
4408-458: The nearest 10°, this affects some runways sooner than others. For example, if the magnetic heading of a runway is 233°, it is designated Runway 23. If the magnetic heading changes downwards by 5 degrees to 228°, the runway remains Runway 23. If on the other hand the original magnetic heading was 226° (Runway 23), and the heading decreased by only 2 degrees to 224°, the runway becomes Runway 22. Because magnetic drift itself
4484-521: The need for "distinctly marked and carefully prepared landing places, [but] the preparing of the surface of reasonably flat ground [is] an expensive undertaking [and] there would also be a continuous expense for the upkeep." For fixed-wing aircraft , it is advantageous to perform takeoffs and landings into the wind to reduce takeoff or landing roll and reduce the ground speed needed to attain flying speed . Larger airports usually have several runways in different directions, so that one can be selected that
4560-581: The north (360° rather than 0°). When taking off from or landing on runway 09, a plane is heading around 90° (east). A runway can normally be used in both directions, and is named for each direction separately: e.g., "runway 15" in one direction is "runway 33" when used in the other. The two numbers differ by 18 (= 180°). For clarity in radio communications, each digit in the runway name is pronounced individually: runway one-five, runway three-three, etc. (instead of "fifteen" or "thirty-three"). A leading zero, for example in "runway zero-six" or "runway zero-one-left",
4636-416: The one they are located in: Other airport codes are of obscure origin, and each has its own peculiarities: In Asia, codes that do not correspond with their city's names include Niigata 's KIJ , Nanchang 's KHN and Pyongyang 's FNJ . EuroAirport Basel Mulhouse Freiburg , which serves three countries, has three airport codes: BSL, MLH, EAP. Some cities have a name in their respective language which
SECTION 60
#17328834416514712-589: The opposite direction (derived from adding 18 to the original number for the 180° difference when approaching from the opposite direction). In some countries, regulations mandate that where parallel runways are too close to each other, only one may be used at a time under certain conditions (usually adverse weather ). At large airports with four or more parallel runways (for example, at Chicago O'Hare , Los Angeles , Detroit Metropolitan Wayne County , Hartsfield-Jackson Atlanta , Denver , Dallas–Fort Worth and Orlando ), some runway identifiers are shifted by 1 to avoid
4788-478: The runway grade (slope) such that, for example, each 1 percent of runway down slope increases the landing distance by 10 percent. An aircraft taking off at a higher altitude must do so at reduced weight due to decreased density of air at higher altitudes, which reduces engine power and wing lift. An aircraft must also take off at a reduced weight in hotter or more humid conditions (see density altitude ). Most commercial aircraft carry manufacturer's tables showing
4864-406: The runway and at 1,000 ft (305 m) intervals. A line of lights on an airfield or elsewhere to guide aircraft in taking off or coming in to land or an illuminated runway is sometimes also known as a flare path . Runway lighting is used at airports during periods of darkness and low visibility. Seen from the air, runway lights form an outline of the runway. A runway may have some or all of
4940-501: The same first and middle letters, indicating that this rule might be followed only in Germany. Many cities retain historical names in their airport codes, even after having undergone an official name/spelling/transliteration change: Some airport codes are based on previous names associated with a present airport, often with a military heritage. These include: Some airports are named for an administrative division or nearby city, rather than
5016-623: The standard numerical naming convention and instead employ the runway's full three digit heading; examples include Dobbins Air Reserve Base 's Runway 110/290 and Duke Field 's Runway 180/360. Runways with non-hard surfaces, such as small turf airfields and waterways for seaplanes , may use the standard numerical scheme or may use traditional compass point naming, examples include Ketchikan Harbor Seaplane Base 's Waterway E/W. Airports with unpredictable or chaotic water currents, such as Santa Catalina Island 's Pebbly Beach Seaplane Base, may designate their landing area as Waterway ALL/WAY to denote
5092-497: The station code of Malton, Mississauga , where it is located). YUL is used for Montréal–Trudeau (UL was the ID code for the beacon in the city of Kirkland , now the location of Montréal–Trudeau). While these codes make it difficult for the public to associate them with a particular Canadian city, some codes have become popular in usage despite their cryptic nature, particularly at the largest airports. Toronto's code has entered pop culture in
5168-414: The suffix T; this is advantageous for certain airfields in the far north such as Thule Air Base (08T/26T). Runway designations may change over time because Earth's magnetic lines slowly drift on the surface and the magnetic direction changes. Depending on the airport location and how much drift occurs, it may be necessary to change the runway designation. As runways are designated with headings rounded to
5244-567: The suffix W; such as Daniel K. Inouye International Airport in Honolulu and Lake Hood Seaplane Base in Anchorage . Small airports that host various forms of air traffic may employ additional suffixes to denote special runway types based on the type of aircraft expected to use them, including STOL aircraft (S), gliders (G), rotorcraft (H), and ultralights (U). Runways that are numbered relative to true north rather than magnetic north will use
5320-633: The surface of water for seaplanes are generally referred to as waterways . Runway lengths are now commonly given in meters worldwide , except in North America where feet are commonly used. In 1916, in a World War I war effort context, the first concrete-paved runway was built in Clermont-Ferrand in France , allowing local company Michelin to manufacture Bréguet Aviation military aircraft. In January 1919, aviation pioneer Orville Wright underlined
5396-441: The susceptibility of thinner pavements to frost heave , this process is generally applicable only where there is no appreciable frost action . Runway pavement surface is prepared and maintained to maximize friction for wheel braking. To minimize hydroplaning following heavy rain, the pavement surface is usually grooved so that the surface water film flows into the grooves and the peaks between grooves will still be in contact with
5472-547: The top of the pavement. A perforated plastic tube (5.9 in (15 cm) in diameter) is placed at the bottom of the ditch. The ditches are filled with gravel size crushed stone. Excessive moisture under a concrete pavement can cause pumping, cracking, and joint failure. In aviation charts, the surface type is usually abbreviated to a three-letter code. The most common hard surface types are asphalt and concrete. The most common soft surface types are grass and gravel. A runway of at least 1,800 m (5,900 ft) in length
5548-504: The two-letter code of the radio beacons that were the closest to the actual airport, such as YQX in Gander or YXS in Prince George . Four of the ten provincial capital airports in Canada have ended up with codes beginning with YY, including: Canada's largest airport is YYZ for Toronto Pearson (as YTZ was already allocated to Billy Bishop Toronto City Airport , the airport was given
5624-552: Was annexed by the City of Pullman in August 1988, and ground was broken in April 1989 to replace the small, outdated passenger terminal of 1957. Constructed in under ten months, the 8,000-square-foot (740 m) terminal opened in February 1990 at a cost of $ 2.7 million, with a formal dedication and airshow in May. It was a single large room, divided between pre- and post-security areas by
5700-678: Was 6,730 feet (2,051 m) and aligned with Moscow Mountain (4,983 feet (1,519 m)) twelve miles (20 km) to the northeast, the highest summit in the area. The rural airport in the Palouse region is the primary air link for its two land-grant universities, Washington State University in Pullman and the University of Idaho in Moscow. In addition to scheduled service from Alaska Airlines (through its Horizon Air subsidiary), both universities use
5776-571: Was the main carrier at the airport, starting Palouse service in late 1971, and had over 16,500 boardings at Pullman–Moscow in 1977. Hughes Airwest supplied service in the early 1970s, and United Express for over two years, from May 1988 to September 1990. Pullman–Moscow Regional Airport covers an area of 467 acres (1.89 km) at an elevation of 2,567 feet (782 m) above sea level . It has one asphalt paved runway designated 5/23, which opened in October 2019 and measures 7,101 by 100 feet (2,164 m × 30 m). The airport
#650349