99-513: Panchakki , a water mill , is located in Aurangabad , Maharashtra , displays the scientific thought process put in medieval Indian architecture. It was designed to generate energy via water brought down from a spring on a mountain. The building, attached to the dargah of Baba Shah Musafir, a Sufi saint, is located in a garden near the Mahmud Darvaza and consist of a mosque, a madrassa, a kacheri,
198-450: A forge , fulling stocks in a fulling mill and so on. However, in corn mills rotation about a vertical axis was required to drive its stones. The horizontal rotation was converted into the vertical rotation by means of gearing, which also enabled the runner stones to turn faster than the waterwheel. The usual arrangement in British and American corn mills has been for the waterwheel to turn
297-400: A 1-inch-thick (25 mm) board, 8/4 (eight quarter) is a 2-inch-thick (51 mm) board, etc. This "quarter" system is rarely used for softwood lumber; although softwood decking is sometimes sold as 5/4, even though it is actually one inch thick (from milling 1 ⁄ 8 in or 3.2 mm off each side in a motorized planing step of production). The "quarter" system of reference is
396-437: A dam on the river above the mill and a more elaborate millpond, sluice gate, mill race and spillway or tailrace. An inherent problem in the overshot mill is that it reverses the rotation of the wheel. If a miller wishes to convert a breastshot mill to an overshot wheel all the machinery in the mill has to be rebuilt to take account of the change in rotation. An alternative solution was the pitchback or backshot wheel. A launder
495-718: A day. By 610 or 670 AD, the watermill was introduced to Japan via Korean Peninsula . It also became known in Tibet by at least 641 AD. According to Greek historical tradition, India received water-mills from the Roman Empire in the early 4th century AD when a certain Metrodoros introduced "water-mills and baths, unknown among them [the Brahmans] till then". Engineers under the Caliphates adopted watermill technology from former provinces of
594-467: A framer much time, because they are pre-cut by the manufacturer for use in 8-, 9-, and 10-foot ceiling applications, which means the manufacturer has removed a few inches or centimetres of the piece to allow for the sill plate and the double top plate with no additional sizing necessary. In the Americas, two-bys (2×4s, 2×6s, 2×8s, 2×10s, and 2×12s), named for traditional board thickness in inches, along with
693-452: A horizontal shaft on which is also mounted a large pit wheel . This meshes with the wallower , mounted on a vertical shaft, which turns the (larger) great spur wheel (mounted on the same shaft). This large face wheel , set with pegs, in turn, turned a smaller wheel (such as a lantern gear ) known as a stone nut, which was attached to the shaft that drove the runner stone. The number of runner stones that could be turned depended directly upon
792-427: A horizontal water wheel on a vertical axle, and the other with a vertical wheel on a horizontal axle. The oldest of these were horizontal mills in which the force of the water, striking a simple paddle wheel set horizontally in line with the flow turned a runner stone balanced on the rynd which is atop a shaft leading directly up from the wheel. The bedstone does not turn. The problem with this type of mill arose from
891-407: A minister's house, a sarai and houses for zananas. Most of the buildings in the dargah complex (including Panchakki) were erected by Turktaz Khan, a noble on the staff of Nizam-ul-Mulk Asaf Jah in about 1695 A. D. The oblong reservoir in front of the mosque and fountains were added 20 years later by Jamil Beg Khan. This water mill was designed to use the energy generated by flowing water from
990-598: A mostly rural work process, than the ancient urban-centered literary class had been. By Carolingian times, references to watermills had become "innumerable" in Frankish records. The Domesday Book , compiled in 1086, records 5,624 watermills in England alone. Later research estimates a less conservative number of 6,082 that should be considered a minimum as the northern reaches of England were never properly recorded. In 1300, this number had risen to between 10,000 and 15,000. By
1089-478: A nearby spring to turn the large grinding stones of the flour mill. Shah Musafir died in 1689. The watermill was used to grind grain for the pilgrims and disciples of saints as well as for the troops of the garrison. The water-mill is kept fed with sufficient water by an underground conduit, which commences from a well just above the junction of the Harsul river with a tributary stream eight kilometers away. After crossing
SECTION 10
#17330942135611188-423: A pit for the pitman who worked below. In 1420 the island of Madeira – an archipelago comprising four islands off the northwest coast of Africa and an autonomous region of Portugal – was discovered. King Henry VI sent settlers to Madeira and the settlers started clearing the huge expanses of forest in order to grow crops. Felled trees were made into planks by water-powered mills and
1287-401: A primary sawmill . Re-sawing is the splitting of 1-to-12-inch (25–305 mm) hardwood or softwood lumber into two or more thinner pieces of full-length boards. For example, splitting a 10-foot-long (3.0 m) 2×4 ( 1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s ( 3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length
1386-455: A relatively small set of specified lengths; in all cases hardwoods are sold to the consumer by the board-foot (144 cubic inches or 2,360 cubic centimetres), whereas that measure is not used for softwoods at the retailer (to the cognizance of the buyer). Also in North America, hardwood lumber is commonly sold in a "quarter" system, when referring to thickness; 4/4 (four quarter) refers to
1485-457: A shaft with a horizontal axis to one with a vertical axis. Although to date only a few dozen Roman mills are archaeologically traced, the widespread use of aqueducts in the period suggests that many remain to be discovered. Recent excavations in Roman London, for example, have uncovered what appears to be a tide mill together with a possible sequence of mills worked by an aqueduct running along
1584-420: A single waterwheel driving more than one set of stones was drawn by Henry Beighton in 1723 and published in 1744 by J. T. Desaguliers . The overshot wheel was a later innovation in waterwheels and was around two and a half times more efficient than the undershot. The undershot wheel, in which the main water wheel is simply set into the flow of the mill race, suffers from an inherent inefficiency stemming from
1683-472: A source of water, used to provide additional power to watermills and water-raising machines. Fulling mills, and steel mills may have spread from Al-Andalus to Christian Spain in the 12th century. Industrial watermills were also employed in large factory complexes built in al-Andalus between the 11th and 13th centuries. The engineers of the Islamic world used several solutions to achieve the maximum output from
1782-449: A timber is referred to as one "timber" (材), and the dimensions of other structural components were quoted in multiples of "timber"; thus, as the width of the actual timber varied, the dimensions of other components were easily calculated, without resorting to specific figures for each scale. The dimensions of timbers in similar applications show a gradual diminution from the Sui dynasty (580–618) to
1881-443: A traditional North American lumber industry nomenclature used specifically to indicate the thickness of rough sawn hardwood lumber. In rough-sawn lumber it immediately clarifies that the lumber is not yet milled, avoiding confusion with milled dimension lumber which is measured as actual thickness after machining. Examples – 3 ⁄ 4 -inch, 19 mm, or 1x. In recent years architects, designers, and builders have begun to use
1980-426: A unit of dimensional lumber is limited by the height and girth of the tree it is milled from. In general the maximum length is 24 ft (7.32 m). Engineered wood products, manufactured by binding the strands, particles, fibers, or veneers of wood, together with adhesives, to form composite materials, offer more flexibility and greater structural strength than typical wood building materials. Pre-cut studs save
2079-408: A vertical-waterwheel via a gear mechanism, and the other equipped with a horizontal-waterwheel without such a mechanism. The former type can be further divided, depending on where the water hits the wheel paddles, into undershot, overshot, breastshot and reverse shot waterwheel mills. The Greeks invented the two main components of watermills, the waterwheel and toothed gearing, and used, along with
SECTION 20
#17330942135612178-581: A water-powered grain-mill to have existed near the palace of king Mithradates VI Eupator at Cabira , Asia Minor , before 71 BC. The Roman engineer Vitruvius has the first technical description of a watermill, dated to 40/10 BC; the device is fitted with an undershot wheel and power is transmitted via a gearing mechanism . He also seems to indicate the existence of water-powered kneading machines. The Greek epigrammatist Antipater of Thessalonica tells of an advanced overshot wheel mill around 20 BC/10 AD. He praised for its use in grinding grain and
2277-495: A watermill. One solution was to mount them to piers of bridges to take advantage of the increased flow. Another solution was the ship mill, a type of watermill powered by water wheels mounted on the sides of ships moored in midstream . This technique was employed along the Tigris and Euphrates rivers in 10th-century Iraq , where large ship mills made of teak and iron could produce 10 tons of flour from corn every day for
2376-461: Is wood that has been processed into uniform and useful sizes (dimensional lumber), including beams and planks or boards . Lumber is mainly used for construction framing , as well as finishing (floors, wall panels , window frames ). Lumber has many uses beyond home building. Lumber is referred to as timber in the United Kingdom, Europe, Australia, and New Zealand, while in other parts of
2475-410: Is a code beaten on to cut wood by a specially made hammer to show the logging licence. The basic understanding of lumber, or "sawn planks", came about in North America in the seventeenth century. Lumber is the most common and widely used method of sawing logs. Plain sawn lumber is produced by making the first cut on a tangent to the circumference of the log. Each additional cut is then made parallel to
2574-537: Is a mill that uses hydropower . It is a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding) , rolling , or hammering . Such processes are needed in the production of many material goods, including flour , lumber , paper , textiles , and many metal products. These watermills may comprise gristmills , sawmills , paper mills , textile mills , hammermills , trip hammering mills, rolling mills , and wire drawing mills. One major way to classify watermills
2673-450: Is about 164' X 31' ornamented with fountains. The excess of water is let in the Kham river. A fine view of the Kham river can be had from the windows of this hall. There is also a cenotaph to the spiritual preceptor of Baba Musafir Shah and a tomb to his disciple Baba Shah Mahmood and a few other graves. A huge Banyan tree on the southern margin of the reservoir provides shade and adds beauty to
2772-653: Is by an essential trait about their location: tide mills use the movement of the tide; ship mills are water mills onboard (and constituting) a ship. Watermills impact the river dynamics of the watercourses where they are installed. During the time watermills operate channels tend to sedimentate , particularly backwater . Also in the backwater area, inundation events and sedimentation of adjacent floodplains increase. Over time however these effects are cancelled by river banks becoming higher. Where mills have been removed, river incision increases and channels deepen. There are two basic types of watermills, one powered by
2871-420: Is by wheel orientation (vertical or horizontal), one powered by a vertical waterwheel through a gear mechanism, and the other equipped with a horizontal waterwheel without such a mechanism. The former type can be further subdivided, depending on where the water hits the wheel paddles, into undershot, overshot, breastshot and pitchback (backshot or reverse shot) waterwheel mills. Another way to classify water mills
2970-775: Is carried out in the UK at Daniels Mill , Little Salkeld Mill and Redbournbury Mill . This was boosted to overcome flour shortages during the Covid pandemic. Some old mills are being upgraded with modern hydropower technology, such as those worked on by the South Somerset Hydropower Group in the UK. In some developing countries, watermills are still widely used for processing grain. For example, there are thought to be 25,000 operating in Nepal, and 200,000 in India. Many of these are still of
3069-514: Is considered re-sawing. Structural lumber may also be produced from recycled plastic and new plastic stock. Its introduction has been strongly opposed by the forestry industry. Blending fiberglass in plastic lumber enhances its strength, durability, and fire resistance. Plastic fiberglass structural lumber can have a "class 1 flame spread rating of 25 or less, when tested in accordance with ASTM standard E 84," which means it burns more slowly than almost all treated wood lumber. A timber mark
Panchakki - Misplaced Pages Continue
3168-543: Is critical, such as trusses , rafters , laminating stock, I-beams and web joints. Machine grading measures a characteristic such as stiffness or density that correlates with the structural properties of interest, such as bending strength . The result is a more precise understanding of the strength of each piece of lumber than is possible with visually graded lumber, which allows designers to use full-design strength and avoid overbuilding. In Europe, strength grading of rectangular sawn lumber/timber (both softwood and hardwood)
3267-633: Is done according to EN-14081 and commonly sorted into classes defined by EN-338. For softwoods, the common classes are (in increasing strength) C16, C18, C24, and C30. There are also classes specifically for hardwoods and those in most common use (in increasing strength) are D24, D30, D40, D50, D60, and D70. For these classes, the number refers to the required 5th percentile bending strength in newtons per square millimetre. There are other strength classes, including T-classes based on tension intended for use in glulam . Grading rules for African and South American sawn lumber have been developed by ATIBT according to
3366-406: Is minimally 1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 inches (38 mm × 89 mm). As previously noted, less wood is needed to produce a given finished size than when standards called for the green lumber to be the full nominal dimension. However, even the dimensions for finished lumber of a given nominal size have changed over time. In 1910, a typical finished 1-inch (25 mm) board
3465-510: Is more economical. There are various types of sawing: Dimensional lumber is lumber that is cut to standardized width and depth, often specified in millimetres or inches (but see below for information on nominal dimensions vs. actual dimensions). Carpenters extensively use dimensional lumber in framing wooden buildings. Common sizes include 2×4 (pictured) (also two-by-four and other variants, such as four-by-two in Australia, New Zealand, and
3564-591: Is required. Under the prescription of the Method of Construction (營造法式) issued by the Song dynasty government in the early twelfth century, timbers were standardized to eight cross-sectional dimensions. Regardless of the actual dimensions of the timber, the ratio between width and height was maintained at 1:1.5. Units are in Song dynasty inches (31.2 mm). Timber smaller than the 8th class were called "unclassed" (等外). The width of
3663-459: Is smaller than the nominal dimensions because modern technology makes it possible to use the logs more efficiently. For example, a "2×4" board historically started out as a green, rough board actually 2 by 4 inches (51 mm × 102 mm). After drying and planing, it would be smaller by a nonstandard amount. Today, a "2×4" board starts out as something smaller than 2 inches by 4 inches and not specified by standards, and after drying and planing
3762-661: Is supplied in standard sizes, mostly for the construction industry – primarily softwood , from coniferous species, including pine , fir and spruce (collectively spruce-pine-fir ), cedar , and hemlock , but also some hardwood, for high-grade flooring. It is more commonly made from softwood than hardwoods, and 80% of lumber comes from softwood. In the United States and Canada, milled boards are called lumber , while timber describes standing or felled trees. In contrast, in Britain, and some other Commonwealth nations and Ireland,
3861-428: Is the tide mill . This mill might be of any kind, undershot, overshot or horizontal but it does not employ a river for its power source. Instead a mole or causeway is built across the mouth of a small bay. At low tide, gates in the mole are opened allowing the bay to fill with the incoming tide. At high tide the gates are closed, trapping the water inside. At a certain point a sluice gate in the mole can be opened allowing
3960-498: Is the preeminent role of France in the introduction of new innovative uses of waterpower. However, he has drawn attention to the dearth of studies of the subject in several other countries. The waterwheel was found in China from 30 AD onwards, when it was used to power trip hammers , the bellows in smelting iron , and in one case, to mechanically rotate an armillary sphere for astronomical observation (see Zhang Heng ). Although
4059-605: Is well utilised in the construction industry. Attempts to maintain lumber quality over time have been challenged by historical changes in the timber resources of the United States – from the slow-growing virgin forests common over a century ago to the fast-growing plantations now common in today's commercial forests. Resulting declines in lumber quality have been of concern to both the lumber industry and consumers and have caused increased use of alternative construction products. Machine stress-rated and machine-evaluated lumber are readily available for end-uses where high strength
Panchakki - Misplaced Pages Continue
4158-503: The American Lumber Standard Committee , appointed by the U.S. Secretary of Commerce . Design values for most species and grades of visually graded structural products are determined in accordance with ASTM standards, which consider the effect of strength reducing characteristics, load duration, safety, and other influencing factors. The applicable standards are based on results of tests conducted in cooperation with
4257-469: The Aurelian walls in the late 3rd century. A breastshot wheel mill dating to the late 2nd century AD was excavated at Les Martres-de-Veyre , France. The 3rd century AD Hierapolis water-powered stone sawmill is the earliest known machine to incorporate the mechanism of a crank and connecting rod . Further sawmills, also powered by crank and connecting rod mechanisms, are archaeologically attested for
4356-522: The Byzantine Empire , having been applied for centuries in those provinces prior to the Muslim conquests , including modern-day Syria , Jordan , Israel , Algeria , Tunisia , Morocco , and Spain (see List of ancient watermills ). The industrial uses of watermills in the Islamic world date back to the 7th century, while horizontal-wheeled and vertical-wheeled watermills were both in widespread use by
4455-467: The Roman Empire . So-called 'Greek Mills' used water wheels with a horizontal wheel (and vertical shaft). A "Roman Mill" features a vertical wheel (on a horizontal shaft). Greek style mills are the older and simpler of the two designs, but only operate well with high water velocities and with small diameter millstones. Roman style mills are more complicated as they require gears to transmit the power from
4554-589: The Romans , undershot, overshot and breastshot waterwheel mills. The earliest evidence of a water-driven wheel appears in the technical treatises Pneumatica and Parasceuastica of the Greek engineer Philo of Byzantium (ca. 280−220 BC). The British historian of technology M.J.T. Lewis has shown that those portions of Philo of Byzantium's mechanical treatise which describe water wheels and which have been previously regarded as later Arabic interpolations, actually date back to
4653-539: The Sui dynasty (581–618 AD) was said to operate hundreds of them by the beginning of the 6th century. A source written in 612 AD mentions Buddhist monks arguing over the revenues gained from watermills. The Tang dynasty (618–907 AD) 'Ordinances of the Department of Waterways' written in 737 AD stated that watermills should not interrupt riverine transport and in some cases were restricted to use in certain seasons of
4752-539: The USDA Forest Products Laboratory. Design Values for Wood Construction, which is a supplement to the ANSI/AF&;PA National Design Specification® for Wood Construction, provides these lumber design values, which are recognized by the model building codes. Canada has grading rules that maintain a standard among mills manufacturing similar woods to assure customers of uniform quality. Grades standardize
4851-507: The ancient world ". It featured 16 overshot waterwheels to power an equal number of flour mills. The capacity of the mills has been estimated at 4.5 tons of flour per day, sufficient to supply enough bread for the 12,500 inhabitants occupying the town of Arelate at that time. A similar mill complex existed on the Janiculum hill, whose supply of flour for Rome 's population was judged by emperor Aurelian important enough to be included in
4950-619: The granary in Baghdad . More than 300 watermills were at work in Iran till 1960. Now only a few are still working. One of the famous ones is the water mill of Askzar and the water mill of the Yazd city, still producing flour. Typically, water is diverted from a river or impoundment or mill pond to a turbine or water wheel, along a channel or pipe (variously known as a flume , head race, mill race , leat , leet, lade (Scots) or penstock ). The force of
5049-404: The "quarter" system in specifications as a vogue of insider knowledge, though the materials being specified are finished lumber, thus conflating the separate systems and causing confusion. Hardwoods cut for furniture are cut in the fall and winter, after the sap has stopped running in the trees. If hardwoods are cut in the spring or summer the sap ruins the natural color of the lumber and decreases
SECTION 50
#17330942135615148-409: The 4×4 (89 mm × 89 mm), are common lumber sizes used in modern construction. They are the basic building blocks for such common structures as balloon-frame or platform-frame housing. Dimensional lumber made from softwood is typically used for construction, while hardwood boards are more commonly used for making cabinets or furniture. Lumber's nominal dimensions are larger than
5247-537: The 6th century AD water-powered stone sawmills at Gerasa and Ephesus . Literary references to water-powered marble saws in what is now Germany can be found in Ausonius 4th century AD poem Mosella . They also seem to be indicated about the same time by the Christian saint Gregory of Nyssa from Anatolia , demonstrating a diversified use of water-power in many parts of the Roman Empire . The earliest turbine mill
5346-608: The 9th century. A variety of industrial watermills were used in the Islamic world, including gristmills , hullers , sawmills , ship mills, stamp mills , steel mills , sugar mills , and tide mills . By the 11th century, every province throughout the Islamic world had these industrial watermills in operation, from al-Andalus and North Africa to the Middle East and Central Asia . Muslim and Middle Eastern Christian engineers also used crankshafts and water turbines , gears in watermills and water-raising machines , and dams as
5445-568: The British Empire. The timber supply began to dwindle at the start of the twentieth century due to significant harvest volumes, so the logging industry was forced to seek timber elsewhere; hence, the expansion into the American West. Logs are converted into lumber by being sawn, hewn , or split . Sawing with a rip saw is the most common method, because sawing allows logs of lower quality, with irregular grain and large knots, to be used and
5544-456: The British chemist and sinologist Joseph Needham speculates that the water-powered millstone could have existed in Han China by the 1st century AD, there is no sufficient literary evidence for it until the 5th century AD. In 488 AD, the mathematician and engineer Zu Chongzhi had a watermill erected which was inspected by Emperor Wu of Southern Qi (r. 482–493 AD). The engineer Yang Su of
5643-532: The Greek 3rd century BC original. The sakia gear is, already fully developed, for the first time attested in a 2nd-century BC Hellenistic wall painting in Ptolemaic Egypt . Lewis assigns the date of the invention of the horizontal-wheeled mill to the Greek colony of Byzantium in the first half of the 3rd century BC, and that of the vertical-wheeled mill to Ptolemaic Alexandria around 240 BC. The Greek geographer Strabo reports in his Geography
5742-825: The UK), 2×6 , and 4×4 . The length of a board is usually specified separately from the width and depth. It is thus possible to find 2×4s that are four, eight, and twelve feet in length. In Canada and the United States, the standard lengths of lumber are 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 feet (1.8, 2.4, 3.0, 3.7, 4.3, 4.9, 5.5, 6.1, 6.7 and 7.3 m). For wall framing, precut "stud" lengths are available, and are commonly used. For ceilings heights of 8, 9 or 10 feet (2.4, 2.7 or 3.0 m), studs are available in 92 + 5 ⁄ 8 inches (2.35 m), 104 + 5 ⁄ 8 inches (2.66 m), and 116 + 5 ⁄ 8 inches (2.96 m). The length of
5841-499: The United States began with the publication of the American Lumber Standard in 1924, which set specifications for lumber dimensions, grade, and moisture content; it also developed inspection and accreditation programs. These standards have changed over the years to meet the changing needs of manufacturers and distributors, with the goal of keeping lumber competitive with other construction products. Current standards are set by
5940-422: The actual standard dimensions of finished lumber. Historically, the nominal dimensions were the size of the green (not dried), rough (unfinished) boards that eventually became smaller finished lumber through drying and planing (to smooth the wood). Today, the standards specify the final finished dimensions and the mill cuts the logs to whatever size it needs to achieve those final dimensions. Typically, that rough cut
6039-416: The buckets fill, the weight of the water starts to turn the wheel. The water spills out of the bucket on the down side into a spillway leading back to river. Since the wheel itself is set above the spillway, the water never impedes the speed of the wheel. The impulse of the water on the wheel is also harnessed in addition to the weight of the water once in the buckets. Overshot wheels require the construction of
SECTION 60
#17330942135616138-450: The date of the earliest tide mills, all of which were discovered on the Irish coast: A 6th century vertical-wheeled tide mill was located at Killoteran near Waterford . A twin flume horizontal-wheeled tide mill dating to c. 630 was excavated on Little Island . Alongside it, another tide mill was found which was powered by a vertical undershot wheel. The Nendrum Monastery mill from 787
6237-529: The draining water to drive a mill wheel or wheels. This is particularly effective in places where the tidal differential is very great, such as the Bay of Fundy in Canada where the tides can rise fifty feet, or the now derelict village of Tide Mills, East Sussex . The last two examples in the United Kingdom which are restored to working conditions can be visited at Eling , Hampshire and at Woodbridge , Suffolk . Run of
6336-453: The early 7th century, watermills were also well established in Ireland . A century later they began to spread across the former Roman Rhine and Danube frontier into the other parts of Germany . Ship mills and tide mills , both of which yet unattested for the ancient period, were introduced in the 6th century. In recent years, a number of new archaeological finds has consecutively pushed back
6435-487: The earth, we taste again the golden age . The Roman encyclopedist Pliny mentions in his Naturalis Historia of around 70 AD water-powered trip hammers operating in the greater part of Italy. There is evidence of a fulling mill in 73/74 AD in Antioch , Roman Syria . The 2nd century AD multiple mill complex of Barbegal in southern France has been described as "the greatest known concentration of mechanical power in
6534-421: The fact that the wheel itself, entering the water behind the main thrust of the flow driving the wheel, followed by the lift of the wheel out of the water ahead of the main thrust, actually impedes its own operation. The overshot wheel solves this problem by bringing the water flow to the top of the wheel. The water fills buckets built into the wheel, rather than the simple paddle wheel design of undershot wheels. As
6633-412: The lack of gearing; the speed of the water directly set the maximum speed of the runner stone which, in turn, set the rate of milling. Most watermills in Britain and the United States of America had a vertical waterwheel, one of four kinds: undershot, breast-shot, overshot and pitchback wheels. This vertical produced rotary motion around a horizontal axis, which could be used (with cams) to lift hammers in
6732-543: The modern era; a 1st class timber during the Sui was reconstructed as 15×10 (Sui dynasty inches, or 29.4 mm). Defects occurring in lumber are grouped into the following four divisions: During the process of converting timber to commercial forms of lumber the following defects may occur: Fungi attack wood (both timber and lumber) when these conditions are all present: Wood with less than 25% moisture (dry weight basis) can remain free of decay for centuries. Similarly, wood submerged in water may not be attacked by fungi if
6831-444: The one before. This method produces the widest possible boards with the least amount of log waste. Lumber manufacturing globally is determined by the preferred style of building; areas with a "wood building culture" (homes were built from wood rather than other materials like brick) are the countries with significant sawmilling industries. Historical wood-frame home building regions are: Europe, North America, Japan. Different areas of
6930-614: The power available for British grain milling. By the early 20th century, availability of cheap electrical energy made the watermill obsolete in developed countries although some smaller rural mills continued to operate commercially later throughout the century. A few historic mills such as the Water Mill , Newlin Mill and Yates Mill in the US and The Darley Mill Centre in the UK still operate for demonstration purposes. Small-scale commercial production
7029-604: The power from a toothed annular ring that is mounted near the outer edge of the wheel. This drives the machinery using a spur gear mounted on a shaft rather than taking power from the central axle . However, the basic mode of operation remains the same; gravity drives machinery through the motion of flowing water . Toward the end of the 19th century, the invention of the Pelton wheel encouraged some mill owners to replace over- and undershot wheels with Pelton wheel turbines driven through penstocks . A different type of watermill
7128-505: The quality of lumber at different levels and are based on moisture content, size, and manufacture at the time of grading, shipping, and unloading by the buyer. The National Lumber Grades Authority (NLGA) is responsible for writing, interpreting and maintaining Canadian lumber grading rules and standards. The Canadian Lumber Standards Accreditation Board (CLSAB) monitors the quality of Canada's lumber grading and identification system. Their common grade abbrievation, CLS, Canadian Lumber Standard
7227-460: The reduction of human labour: Hold back your hand from the mill, you grinding girls; even if the cockcrow heralds the dawn, sleep on. For Demeter has imposed the labours of your hands on the nymphs , who leaping down upon the topmost part of the wheel, rotate its axle; with encircling cogs, it turns the hollow weight of the Nisyrian millstones . If we learn to feast toil-free on the fruits of
7326-610: The right and the city walls are to the left, while Shah Musafir's garden is between the latter and the river bank. The garden walls descend down to the bed of the Nala; and the dargah and the accompanying buildings, with the cisterns and the fountains that are interspersed, blend picturesquely with the garden vegetation. An 18th-century library, housing manuscripts and a number of precious books have been reopened after 70 years here ( Aurangabad ). The library treasured about 100,000 books and writing pieces until Indian independence (1947). However, it
7425-448: The river schemes do not divert water at all and usually involve undershot wheels the mills are mostly on the banks of sizeable rivers or fast flowing streams. Other watermills were set beneath large bridges where the flow of water between the stanchions was faster. At one point London bridge had so many water wheels beneath it that bargemen complained that passage through the bridge was impaired. In 1870 watermills still produced 2/3 of
7524-511: The rules of the Sciages Avivés Tropicaux Africains (SATA) and is based on clear cuttings – established by the percentage of the clear surface. In North America, market practices for dimensional lumber made from hardwoods varies significantly from the regularized standardized ' dimension lumber ' sizes used for sales and specification of softwoods – hardwood boards are often sold totally rough cut, or machine planed only on
7623-621: The side of the River Fleet . In 537 AD, ship mills were ingeniously used by the East Roman general Belisarius , when the besieging Goths cut off the water supply for those mills. These floating mills had a wheel that was attached to a boat moored in a fast flowing river. The surviving evidence for watermills sharply increases with the emergence of documentary genres such as monastic charters , Christian hagiography and Germanic legal codes . These were more inclined to address watermilling,
7722-406: The supply of water available. As waterwheel technology improved mills became more efficient, and by the 19th century, it was common for the great spur wheel to drive several stone nuts, so that a single water wheel could drive as many as four stones. Each step in the process increased the gear ratio which increased the maximum speed of the runner stone. Adjusting the sluice gate and thus the flow of
7821-411: The term timber is used in both senses. (In the UK, the word lumber is rarely used in relation to wood and has several other meanings.) Re-manufactured lumber is the result of secondary or tertiary processing of previously milled lumber. Specifically, it refers to lumber cut for industrial or wood-packaging use. Lumber is cut by ripsaw or resaw to create dimensions that are not usually processed by
7920-475: The timber (cedar and yew) was shipped to Portugal and Spain. About 1427, the first sawmill in Germany was built. Cornelis Corneliszoon (or Krelis Lootjes) was a Dutch windmill owner from Uitgeest who invented the first mechanical sawmill, which was wind-powered, on 15 December 1593. This made the conversion of log timber into planks 30 times faster than previously. The circular saw, as used in modern sawmills,
8019-580: The traditional style, but some have been upgraded by replacing wooden parts with better-designed metal ones to improve the efficiency. For example, the Centre for Rural Technology in Nepal upgraded 2,400 mills between 2003 and 2007. This is also the period when water-mills started to spread outside the former Empire. According to Cedrenus (Historiarum compendium), a certain Metrodoros who went to India in c. AD 325 "constructed water-mills and baths, unknown among them [the Brahmans] till then". Lumber Lumber
8118-475: The tributary stream near its confluence with Harsul, this water-pipe proceeds to the Panchakki reservoir. The arrangement is such that the water is made to fall into the Panchakki cistern from quite a height in order to generate the necessary power to drive the mill. The cistern lies in front of the mosque whose bottom forms the roof of a spacious hall. The cool chambers of the hall are used in summers by pilgrims, and
8217-405: The trunks of trees were split with wedges into as many and as thin pieces as possible. If it was necessary to have them still thinner, they were hewn, by some sharp instrument, on both sides, to the proper size. This simple but wasteful manner of making boards is still continued in some places. Otherwise, logs were sawn using a two-person whipsaw, or pit-saw, using saddleblocks to hold the log, and
8316-453: The two (broader) face sides. When hardwood boards are also supplied with planed faces, it is usually both by random widths of a specified thickness (normally matching milling of softwood dimensional lumber) and somewhat random lengths. But besides those older (traditional and normal) situations, in recent years some product lines have been widened to also market boards in standard stock sizes; these usually retail in big-box stores and using only
8415-459: The value of the wood for furniture. Engineered lumber is lumber created by a manufacturer and designed for a certain structural purpose. The main categories of engineered lumber are: In the United States, pilings are mainly cut from southern yellow pines and Douglas-fir . Treated pilings are available in chromated copper arsenate retentions of 0.60, 0.80 and 2.50 pounds per cubic foot (9.6, 12.8 and 40.0 kg/m ) if treatment
8514-486: The water past the main wheel allowed the miller to compensate for seasonal variations in the water supply. Finer speed adjustment was made during the milling process by tentering , that is, adjusting the gap between the stones according to the water flow, the type of grain being milled, and the grade of flour required. In many mills (including the earliest) the great spur wheel turned only one stone, but there might be several mills under one roof. The earliest illustration of
8613-596: The water's movement drives the blades of a wheel or turbine, which in turn rotates an axle that drives the mill's other machinery. Water leaving the wheel or turbine is drained through a tail race, but this channel may also be the head race of yet another wheel, turbine or mill. The passage of water is controlled by sluice gates that allow maintenance and some measure of flood control; large mill complexes may have dozens of sluices controlling complicated interconnected races that feed multiple buildings and industrial processes. Watermills can be divided into two kinds, one with
8712-516: The whole scene. In the North-West corner, adjacent to the cistern, is the water mill driven entirely by water power. It is said that in the olden days, grain could be ground without physical effort. The country here exhibits one of the most picturesque landscapes about Aurangabad . The Kaula Nala skirts the garden, and is first crossed by an old bridge with pointed arches and then by a second bridge which spans it lower down. The walls of Begampura are to
8811-536: The world (mainly the United States and Canada) the term timber refers specifically to unprocessed wood fiber , such as cut logs or standing trees that have yet to be cut. Lumber may be supplied either rough- sawn , or surfaced on one or more of its faces. Rough lumber is the raw material for furniture-making, and manufacture of other items requiring cutting and shaping. It is available in many species, including hardwoods and softwoods , such as white pine and red pine , because of their low cost. Finished lumber
8910-417: The world are recognized as significant timber suppliers; however, these areas (Indonesia, Sarawak, New Guinea, etc.) are exporters of raw logs and do not have a significant domestic lumber producing industry. The largest lumber manufacturing regions in the world are: China (18%); United States (17%); Canada (10%); Russia (9%); Germany (5%); Sweden (4%). In early periods of society, to make wood for building,
9009-456: The year. From other Tang-era sources of the 8th century, it is known that these ordinances were taken very seriously, as the government demolished many watermills owned by great families, merchants, and Buddhist abbeys that failed to acknowledge ordinances or meet government regulations. A eunuch serving Emperor Xuanzong of Tang (r. 712–756 AD) owned a watermill by 748 AD which employed five waterwheels that ground 300 bushels of wheat
9108-514: Was 13 ⁄ 16 in (21 mm). In 1928, that was reduced by 4%, and yet again by 4% in 1956. In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber
9207-516: Was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch. Dimensional lumber is available in green, unfinished state, and for that kind of lumber, the nominal dimensions are the actual dimensions. Individual pieces of lumber exhibit a wide range in quality and appearance with respect to knots, slope of grain, shakes and other natural characteristics. Therefore, they vary considerably in strength, utility, and value. The move to set national standards for lumber in
9306-622: Was built at the Falls of Piscatauqua , on the line between the Province of Maine and the Province of New Hampshire , in 1634. Unauthenticated records, however, claim that as early as 1633 several mills were operating in New Netherland . The American colonies were essential to England in the role of supplier of lumber for the British fleet. By the 1790s, New England was exporting 36 million feet of pine boards and at least 300 ship masts per year to
9405-731: Was closed down in the 1970s due to administrative reasons due to which many of the library books were shifted to Hyderabad . The library presently houses 2,500 books on various subjects related to history, law, medicine, Sufism , religion and philosophy in Arabic , penned by philosophers, saints and scholars in Urdu and Persian language . Panchakki also houses the headquarters of the Waqf board of Maharashtra . 19°53′22″N 75°18′56″E / 19.88944°N 75.31556°E / 19.88944; 75.31556 Water mill A watermill or water mill
9504-552: Was found in Chemtou and Testour , Roman North Africa , dating to the late 3rd or early 4th century AD. A possible water-powered furnace has been identified at Marseille , France. Mills were commonly used for grinding grain into flour (attested by Pliny the Elder ), but industrial uses as fulling and sawing marble were also applied. The Romans used both fixed and floating water wheels and introduced water power to other provinces of
9603-531: Was invented by an Englishman named Miller in 1777. It was not until the nineteenth century, however, that it was generally applied, and its great work belongs to that period. The first insertable teeth for this saw were invented by W. Kendal, an American, in 1826. Logging in the American colonies began in 1607 when the Jamestown settlers cut timber to build the first settlement in the new world. America's first sawmill
9702-436: Was placed at the end of the flume on the headrace, this turned the direction of the water without much loss of energy, and the direction of rotation was maintained. Daniels Mill near Bewdley , Worcestershire is an example of a flour mill that originally used a breastshot wheel, but was converted to use a pitchback wheel. Today it operates as a breastshot mill. Larger water wheels (usually overshot steel wheels) transmit
9801-614: Was situated on an island in Strangford Lough in Northern Ireland . Its millstones are 830 mm in diameter and the horizontal wheel is estimated to have developed 7 ⁄ 8 horsepower (650 W) at its peak. Remains of an earlier mill dated at 619 were also found at the site. In a 2005 survey the scholar Adam Lucas identified the following first appearances of various industrial mill types in Western Europe. Noticeable
#560439