Misplaced Pages

#466533

89-713: The 15027 / 15028 Maurya Express is an Express train belonging to North Eastern Railway zone that runs between Sambalpur Junction and Gorakhpur Junction in India. It is currently being operated with 15027/15028 train numbers on a daily basis. Due to the closure of Dhanbad–Chandrapura line , this train was diverted route to Dhanbad–Netaji Subhas Chandra Bose Gomoh–Chandrapura line. Now it has been restored on its previous route. The 15027/Maurya Express has an average speed of 36 km/h and covers 851 km in 23h 30m. The 15028/Maurya Express has an average speed of 35 km/h and covers 851 km in 24h 05m. The important halts of

178-459: A WCP-1 locomotives with seven coaches along the route. The Grand Trunk express commenced operating as a dedicated daily train between Madras and Delhi from 1 September 1930. WDM-1 , the first diesel locomotive introduced in 1957 was capable of speeds of up to 104 km/h (65 mph). In 1957, Indian Railways adopted 25 kV 50 Hz AC traction with the first runs beginning in December 1959 with

267-434: A "nose on" viewpoint, while the crankshaft (which unlike other designs, never "emerged" from the crankcase) and other internal parts spun clockwise at the same speed, so the set was effectively running at 1800 rpm. This was achieved by the use of bevel gearing at the rear of the crankcase, resulting in the eleven-cylindered Siemens-Halske Sh.III , with less drag and less net torque. Used on several late war types, notably

356-713: A distance of 54 km (34 mi) in 57 minutes, averaging a speed of 57 km/h (35 mph). Earlier trains ran using steam locomotives , where barely reached speeds of 90 km/h (56 mph). With the introduction of WP class locomotives in 1947, speeds of 100 km/h (62 mph) were operated commercially. While the first electric train ran in Bombay in 1925 on DC traction, WCP-1 class electric locomotives were introduced in 1928, capable of hauling trains at speeds of up to 137 km/h (85 mph), though trains operated at lower speed. On 1 April 1929, Grand Trunk Express commenced operations between Peshawar in

445-501: A former watchmaker, constructed rotary engines in the 1890s. He was interested in the rotary layout for two main reasons: Balzer produced a 3-cylinder, rotary engined car in 1894, then later became involved in Langley 's Aerodrome attempts, which bankrupted him while he tried to make much larger versions of his engines. Balzer's rotary engine was later converted to static radial operation by Langley's assistant, Charles M. Manly , creating

534-439: A good deal of practice to acquire the necessary knack. After starting the engine with a known setting that allowed it to idle, the air valve was opened until maximum engine speed was obtained. Throttling a running engine back to reduce revs was possible by closing off the fuel valve to the required position while re-adjusting the fuel/air mixture to suit. This process was also tricky, so that reducing power, especially when landing,

623-594: A large gyroscope . During level flight the effect was not especially apparent, but when turning the gyroscopic precession became noticeable. Due to the direction of the engine's rotation, left turns required effort and happened relatively slowly, combined with a tendency to nose up, while right turns were almost instantaneous, with a tendency for the nose to drop. In some aircraft, this could be advantageous in situations such as dogfights. The Sopwith Camel suffered to such an extent that it required left rudder for both left and right turns, and could be extremely hazardous if

712-480: A maximum operational speed of 160 km/h (99 mph). The actual operating speed was much lower due to track restrictions and congestion with top speeds restricted to 130 km/h (81 mph) for most trains. In December 2023, two modified WAP-5 locomotives were used to haul the Amrit Bharat train-set in a push-pull configuration, capable of reaching speeds of up to 160 km/h (99 mph). According to

801-545: A maximum permitted speed of 160 km/h (99 mph). The history of the Indian Railway began in 1832 with the proposal to construct the first railway line in India at Madras . In 1837, the first train ran on Red Hill railway line between Red Hills and Chintadripet in Madras and was hauled by a rotary steam engine imported from England . In 1853, the first passenger train ran between Bombay and Thane which covered

890-502: A maximum speed of 130 km/h (81 mph). WAP-5 class locomotives, initially imported from ABB in 1995 and later manufactured at Chittaranjan Locomotive Works in India, reached 184 km/h (114 mph) in trials and later set an Indian speed record by hauling an express train between Delhi and Agra at a speed of 160 km/h (99 mph) in 2014. In December 2009, the Ministry of Railways of Government of India envisaged

979-407: A plan to increase the speed of passenger trains to 160–200 km/h (99–124 mph) on dedicated conventional tracks and improve the existing conventional lines to handle speeds of up to 160 km/h (99 mph). Dedicated Freight Corridor Corporation of India has built dedicated freight corridors across India to divert cargo traffic from the passenger railway tracks, thus helping increase

SECTION 10

#1732905969467

1068-405: A single crankshaft, in the same general form as a radial, but there were also rotary boxer engines and even one-cylinder rotaries. Three key factors contributed to the rotary engine's success at the time: Engine designers had always been aware of the many limitations of the rotary engine, so when static style engines became more reliable and gave better specific weights and fuel consumption,

1157-408: A standard Otto cycle engine, with cylinders arranged radially around a central crankshaft just like a conventional radial engine , but instead of having a fixed cylinder block with rotating crankshaft , the crankshaft remains stationary and the entire cylinder block rotates around it. In the most common form, the crankshaft was fixed solidly to the airframe, and the propeller was simply bolted to

1246-571: A ticket holder to board the train and share a berth. Reserved tickets can be booked by passengers who want to travel at short notice at higher fares through the Tatkal train ticket , where no refund is applicable on cancellation. A valid proof for the purchase of ticket along with photo identification is required to board the train. Unreserved tickets for short distance or unplanned travels may be purchased at stations or through UTS mobile app at any time before departure. Holders of such tickets may only board

1335-500: Is a stub . You can help Misplaced Pages by expanding it . Express trains in India India has a system of express trains, operated by Indian Railways which comes under the purview of the Ministry of Railways of Government of India . As of 2023 , it maintains over 108,706 km (67,547 mi) of tracks, spanning across 68,584 km (42,616 mi) in route length, and operates nearly 3,000 express trains daily. According to

1424-525: The Clerget and Le Rhône companies used conventional pushrod-operated valves in the cylinder head, but used the same principle of drawing the fuel mixture through the crankshaft, with the Le Rhônes having prominent copper intake tubes running from the crankcase to the top of each cylinder to admit the intake charge. The 80 hp (60 kW) seven-cylinder Gnome was the standard at the outbreak of World War I, as

1513-570: The North Western Railway and Mangalore with two coaches detached and connected to Madras further. The Frontier Mail made its inaugural run between Bombay and Peshawar in 1928. Technical advancements led to automatic colour light signals become operational between Bombay and Byculla in 1928. In the subsequent years, the route from Bombay to Poona was electrified and in June 1930, the first deluxe train, Deccan Queen began running, hauled by

1602-555: The Powerwheel , a wheel with a rotating one-cylinder engine , clutch and drum brake inside the hub, but it never entered production. Besides the configuration of cylinders moving around a fixed crankshaft, several different engine designs are also called rotary engines . The most notable pistonless rotary engine , the Wankel rotary engine has been used by NSU in the Ro80 car, by Mazda in

1691-553: The Siemens-Schuckert D.IV fighter, the new engine's low running speed, coupled with large, coarse pitched propellers that sometimes had four blades (as the SSW D.IV used), gave types powered by it outstanding rates of climb, with some examples of the late production Sh.IIIa powerplant even said to be delivering as much as 240 hp. One new rotary powered aircraft, Fokker's own D.VIII , was designed at least in part to provide some use for

1780-490: The Tughlakabad – Agra section. Earlier steam locomotive operated trains largely operated below 100 km/h (62 mph). With the introduction of electric locomotives in later 1920s and newer steam locomotives, speeds of 100 km/h (62 mph) were achieved. With the movement to AC traction in late 1950s and introduction of diesel locomotives , maximum speeds of up to 120 km/h (75 mph) were achieved in

1869-575: The WAM-1 locomotives, capable of reaching speeds of up to 112 km/h (70 mph). In 1960, the Railway Board of India commissioned a study to increase the speed of its trains, which was restricted to 96 km/h (60 mph) on the existent broad gauge lines. A target of 160 km/h (99 mph) with an intermediate stage of 120 km/h (75 mph) was set for passenger trains. Research Design and Standards Organisation (RDSO) started work on

SECTION 20

#1732905969467

1958-424: The 3-cylinder, then very shortly thereafter 5-cylinder rotary engines later in 1906, as another early American automaker utilizing rotary engines expressly manufactured for automotive use. Emil Berliner sponsored its development of the 5-cylinder Adams-Farwell rotary engine design concept as a lightweight power unit for his unsuccessful helicopter experiments. Adams-Farwell engines later powered fixed-wing aircraft in

2047-563: The Central Aerohydrodynamic Institute), constructed one of the first practical single-lift rotor machines with their TsAGI 1-EA single rotor helicopter, powered by two Soviet-designed and built M-2 rotary engines, themselves up-rated copies of the Gnome Monosoupape rotary engine of World War I. The TsAGI 1-EA set an unofficial altitude record of 605 meters (1,985 ft) with Cheremukhin piloting it on 14 August 1932 on

2136-602: The Gnome Lambda, and it quickly found itself being used in a large number of aircraft designs. It was so good that it was licensed by a number of companies, including the German Motorenfabrik Oberursel firm who designed the original Gnom engine. Oberursel was later purchased by Fokker , whose 80 hp Gnome Lambda copy was known as the Oberursel U.0. It was not at all uncommon for French Gnôme Lambdas, as used in

2225-537: The Ministry of Railways, express trains are classified as follows: a. Super-fast express: Any passenger train with an average speed higher than 55 km/h (34 mph) on 1,676 mm ( 5 ft 6 in ) broad gauge . b. Mail: Trains which earlier had a mail coach attached. Newer trains are not named so, but older trains remain in operation. c. Express: Express trains travel faster and have fewer stops than ordinary passenger trains. As of 2023 , it manages

2314-524: The Ministry of Railways, express trains travel faster and have limited stops than ordinary passenger trains. Any passenger train with an average speed higher than 55 km/h (34 mph) is considered super-fast. As of 2023 , India does not have any operational high-speed trains . The maximum operational speed of 160 km/h (99 mph) is achieved by Gatimaan Express and Rani Kamalapati (Habibganj)–Hazrat Nizamuddin Vande Bharat Express on

2403-573: The Oberursel factory's backlog of otherwise redundant 110 hp (82 kW) Ur.II engines, themselves clones of the Le Rhône 9J rotary. Because of the Allied blockade of shipping, the Germans were increasingly unable to obtain the castor oil necessary to properly lubricate their rotary engines. Substitutes were never entirely satisfactory - causing increased running temperatures and reduced engine life. By

2492-695: The U.III of the same power rating. While an example of the Double Lambda went on to power one of the Deperdussin Monocoque racing aircraft to a world-record speed of nearly 204 km/h (126 mph) in September 1913, the Oberursel U.III is only known to have been fitted into a few German production military aircraft, the Fokker E.IV fighter monoplane and Fokker D.III fighter biplane, both of whose failures to become successful combat types were partially due to

2581-632: The US after 1910. It has also been asserted that the Gnôme design was derived from the Adams-Farwell, since an Adams-Farwell car is reported to have been demonstrated to the French Army in 1904. In contrast to the later Gnôme engines, and much like the later Clerget 9B and Bentley BR1 aviation rotaries, the Adams-Farwell rotaries had conventional exhaust and inlet valves mounted in the cylinder heads. The Gnome engine

2670-535: The blip switch is useful while landing, as it provides a more reliable, quicker way to initiate power if needed, rather than risk a sudden engine stall, or the failure of a windmilling engine to restart at the worst possible moment. Félix Millet showed a 5-cylinder rotary engine built into a bicycle wheel at the Exposition Universelle in Paris in 1889. Millet had patented the engine in 1888, so must be considered

2759-445: The bottom of the basically circular cowling on most rotary engines to be cut away, or fitted with drainage slots. By 1918 a Clerget handbook advised maintaining all necessary control by using the fuel and air controls, and starting and stopping the engine by turning the fuel on and off. The recommended landing procedure involved shutting off the fuel using the fuel lever, while leaving the blip switch on. The windmilling propeller made

Maurya Express - Misplaced Pages Continue

2848-761: The coach class and the second letter identifies the coach number. The berths and seats are numbered by an alphanumeric code with the letter(s) identifying the berth/seat type and numbers identifying the position. In standard coaches, the berths and seats are classified as follows: Indian Railways Operates various classes of Express trains . The trains are classified basis average speed and facilities with express trains having fewer halts, priority on rail network and faster average speed. The trains are identified by five digit numbers with train-pairs traveling in opposite directions usually labelled with consecutive numbers. Express trains often have specific unique names for easy identification. Rajdhani Express introduced in 1969 were

2937-443: The coupe-switch was depressed, allowing it to cut out all spark voltage to all nine cylinders, at evenly spaced intervals to achieve the multiple levels of power reduction. The airworthy reproduction Fokker D.VIII parasol monoplane fighter at Old Rhinebeck Aerodrome, uniquely powered with a Gnome 9N, often demonstrates the use of its Gnome 9N's four-level output capability in both ground runs and in flight. Rotary engines produced by

3026-658: The crankshaft, but it rotated in the opposite direction to the cylinder block, thereby largely cancelling out negative effects. This proved too complicated for reliable operation and Redrup changed the design to a static radial engine, which was later tried in the experimental Vickers F.B.12b and F.B.16 aircraft, unfortunately without success. As the war progressed, aircraft designers demanded ever-increasing amounts of power. Inline engines were able to meet this demand by improving their upper rev limits, which meant more power. Improvements in valve timing, ignition systems, and lightweight materials made these higher revs possible, and by

3115-407: The days of the rotary engine were numbered. The late World War I Bentley BR2 was the largest and most powerful rotary engine; it reached a point beyond which this type of engine could not be further developed, and it was the last of its kind to be adopted into RAF service. It is often asserted that rotary engines had no throttle and hence power could only be reduced by intermittently cutting

3204-441: The desired setting (usually full open) and then adjust the fuel/air mixture to suit using a separate "fine adjustment" lever that controlled the air supply valve (in the manner of a manual choke control). Due to the rotary engine's large rotational inertia, it was possible to adjust the appropriate fuel/air mixture by trial and error without stalling it, although this varied between different types of engine, and in any case it required

3293-517: The earliest examples of the Bristol Scout biplane, to meet German versions, powering Fokker E.I Eindeckers in combat, from the latter half of 1915 on. The only attempts to produce twin-row rotary engines in any volume were undertaken by Gnome, with their Double Lambda fourteen-cylinder 160 hp design, and with the German Oberursel firm's early World War I clone of the Double Lambda design,

3382-699: The early 2010s. From the late 1990s, the ICF coaches were replaced by safer and newer LHB coaches designed by Linke-Hofmann-Busch of Germany . In the late 2010s, Indian railways started upgrading the coaches of select express trains from LHB to new Tejas coaches with enhanced features. As of March 2022, Indian Railways had 84,863 passenger coaches. Semi-high speed Train 18 was rolled out in 2018. These self-propelled EMU train sets manufactured by Integral Coach Factory are capable of reaching 180 kilometres per hour (110 mph). These trains have eight or sixteen coaches with driver cabins on both ends, which eliminates

3471-564: The early post-war years, the 1914-origin Avro 504 K, had a universal mounting to allow the use of several different types of low powered rotary, of which there was a large surplus supply. Similarly, the Swedish FVM Ö1 Tummelisa advanced training aircraft, fitted with a Le-Rhone-Thulin 90 hp (67 kW) rotary engine, served until the mid thirties. Designers had to balance the cheapness of war-surplus engines against their poor fuel efficiency and

3560-414: The end of the war the average engine had increased from 1,200 rpm to 2,000 rpm. The rotary was not able to do the same due to the drag of the rotating cylinders through the air. For instance, if an early-war model of 1,200 rpm increased its revs to only 1,400, the drag on the cylinders increased 36%, as air drag increases with the square of velocity. At lower rpm, drag could simply be ignored, but as

3649-487: The engine continue to spin without delivering any power as the aircraft descended. It was important to leave the ignition on to allow the spark plugs to continue to spark and keep them from oiling up, so that the engine could (if all went well) be restarted simply by re-opening the fuel valve. Pilots were advised to not use an ignition cut out switch, as it would eventually damage the engine. Pilots of surviving or reproduction aircraft fitted with rotary engines still find that

Maurya Express - Misplaced Pages Continue

3738-414: The engine was typically run at full throttle, and also because the valve timing was often less than ideal. Oil consumption was also very high. Due to primitive carburetion and absence of a true sump , the lubricating oil was added to the fuel/air mixture. This made engine fumes heavy with smoke from partially burnt oil. Castor oil was the lubricant of choice, as its lubrication properties were unaffected by

3827-501: The first trains to reach speeds of up to 120 km/h (75 mph). Shatabdi Express , introduced in 1988, are capable of running at a maximum speed of 150 km/h (93 mph). In 2019, Vande Bharat Express was launched with self-propelled EMU train-sets capable of reaching maximum speed of 180 km/h (110 mph) with operational speeds restricted to 130–160 km/h (81–99 mph). A non-airconditioned semi-high speed train-set hauled by two modified WAP-5 locomotives

3916-432: The fourth largest national railway system by size with a track length of 132,310 km (82,210 mi), running track length of 106,493 km (66,172 mi) and route length of 68,584 km (42,616 mi). Track sections are rated for speeds ranging from 80 to 200 km/h (50 to 124 mph), though the maximum speed attained by passenger trains is 160 km/h (99 mph). In 2009, Indian Railways started

4005-422: The front of the crankcase . This difference also has much impact on design (lubrication, ignition, fuel admission, cooling, etc.) and functioning (see below). The Musée de l'Air et de l'Espace in Paris has on display a special, "sectioned" working model of an engine with seven radially disposed cylinders. It alternates between rotary and radial modes to demonstrate the difference between the internal motions of

4094-410: The fuel (and lubricating oil) was taken into the cylinders already mixed with air - as in a normal four-stroke engine. Although a conventional carburetor, with the ability to keep the fuel/air ratio constant over a range of throttle openings, was precluded by the spinning crankcase; it was possible to adjust the air supply through a separate flap valve or "bloctube". The pilot needed to set the throttle to

4183-434: The general or unreserved coaches. India has some of the lowest train fares in the world, and lower class passenger fares are subsidised. Discounted fares are applicable for railway employees, the differently-abled, students, athletes, patients and those taking competitive examinations. Seats of lower class of accommodation are reserved for women or senior citizens in some trains. Rotary engine This type of engine

4272-453: The ignition using a "blip" switch . This was only true of the "Monosoupape" (single valve) type, which took most of the air into the cylinder through the exhaust valve, which remained open for a portion of the downstroke of the piston. Thus the mixture of fuel and air in the cylinder could not be controlled via the crankcase intake. The "throttle" (fuel valve) of a monosoupape provided only a limited degree of speed regulation, as opening it made

4361-538: The implementation of regional high-speed rail projects to provide services at 250–350 km/h (160–220 mph), and planning for corridors connecting commercial, tourist, and pilgrimage hubs. On 25 July 2013, Government of India established the High Speed Rail Corporation for the implementation of high-speed rail corridor projects and in 2014, the Diamond Quadrilateral high speed rail project

4450-540: The inertia problem of rotary engines. As early as 1906 Charles Benjamin Redrup had demonstrated to the Royal Flying Corps at Hendon a 'Reactionless' engine in which the crankshaft rotated in one direction and the cylinder block in the opposite direction, each one driving a propeller. A later development of this was the 1914 reactionless 'Hart' engine designed by Redrup in which there was only one propeller connected to

4539-474: The interests of better cooling, and the world's first production rotary engine, the 7-cylinder, air-cooled 50 hp (37 kW) " Omega " was shown at the 1908 Paris automobile show. The first Gnome Omega built still exists, and is now in the collection of the Smithsonian's National Air and Space Museum . The Seguins used the highest strength material available - recently developed nickel steel alloy - and kept

SECTION 50

#1732905969467

4628-594: The inventor Roger Ravaud fitted one to his Aéroscaphe , a combination hydrofoil /aircraft, which he entered in the motor boat and aviation contests at Monaco. Henry Farman 's use of the Gnome at the famous Rheims aircraft meet that year brought it to prominence, when he won the Grand Prix for the greatest non-stop distance flown—180 kilometres (110 mi)—and also set a world record for endurance flight. The very first successful seaplane flight, of Henri Fabre 's Le Canard ,

4717-411: The last three digits indicating the class. In 2018, the numbering system was changed with the first two digits indicating the year of manufacture and the last four digits indicating the sequence number. As of March 2022, Indian Railways manages and operates 7,308 stations. Prior to 2017, the stations were classified into seven categories based on their earnings. Since 2017, Indian Railways categorizes

4806-411: The late 1960s. With the introduction of high power electric locomotives in the 1990s, operating speeds of 130 km/h (81 mph) was achieved with further developments leading to speeds of maximum speeds of 160 km/h (99 mph) being realized in the early 2010s. Vande Bharat Express , an Electric Multiple Unit (EMU) run service introduced in 2019, is the fastest operational express train with

4895-420: The minimum essential amenities required by each station. Express trains stop at select set of stations identified using a combination of factors including commercial importance, traffic and capabilities. Indian Railways offers various travel classes on its coaches . For the purpose of identification in passenger trains , coaches in a train-set are assigned an alpha-numeric code. The first letter identifies

4984-405: The mixture too rich, while closing it made it too lean (in either case quickly stalling the engine, or damaging the cylinders). Early models featured a pioneering form of variable valve timing in an attempt to give greater control, but this caused the valves to burn and therefore it was abandoned. The only way of running a Monosoupape engine smoothly at reduced revs was with a switch that changed

5073-438: The normal firing sequence so that each cylinder fired only once per two or three engine revolutions, but the engine remained more or less in balance. As with excessive use of the "blip" switch: running the engine on such a setting for too long resulted in large quantities of unburned fuel and oil in the exhaust, and gathering in the lower cowling, where it was a notorious fire hazard. Most rotaries had normal inlet valves, so that

5162-404: The notable Manly–Balzer engine . The famous De Dion-Bouton company produced an experimental 4-cylinder rotary engine in 1899. Though intended for aviation use, it was not fitted to any aircraft. The Adams-Farwell firm's automobiles, with the firm's first rolling prototypes using 3-cylinder rotary engines designed by Fay Oliver Farwell in 1898, led to production Adams-Farwell cars with first

5251-562: The operating expense of their total-loss lubrication system, and by the mid-1920s, rotaries had been more or less completely displaced even in British service, largely by the new generation of air-cooled "stationary" radials such as the Armstrong Siddeley Jaguar and Bristol Jupiter . Experiments with the concept of the rotary engine continued. The first version of the 1921 Michel engine , an unusual opposed-piston cam engine , used

5340-619: The operational speed of the passenger trains to 160 km/h (99 mph). In 2014, the Diamond Quadrilateral high-speed rail network project was launched by Government of India and is envisioned to connect the four major metro cities of India namely: Chennai, Delhi, Kolkata and Mumbai. The Ministry of Railways envisaged to have dedicated standard gauge tracks capable of top speeds of 300–350 km/h (190–220 mph) with trains running on elevated corridors to isolate high-speed train tracks by 2026 and identified probable routes for

5429-406: The passenger and fare details along with berth or seat number(s) allocated to them on the ticket. In case of no confirmed reservation, a wait-list number is assigned and wait-listed tickets get confirmed if there are cancellations of already reserved tickets. Reservation against cancellation tickets is an intermediate category between the waiting and confirmed lists in sleeper classes which allows

SECTION 60

#1732905969467

5518-672: The pilot applied full power at the top of a loop at low airspeeds. Trainee Camel pilots were warned to attempt their first hard right turns only at altitudes above 1,000 ft (300 m). The Camel's most famous German foe, the Fokker Dr.I triplane , also used a rotary engine, usually the Oberursel Ur.II clone of the French-built Le Rhone 9J 110 hp powerplant. Even before the First World War, attempts were made to overcome

5607-533: The pioneer of the internal combustion rotary engine. A machine powered by his engine took part in the Paris-Bordeaux-Paris race of 1895 and the system was put into production by Darracq and Company London in 1900. Lawrence Hargrave first developed a rotary engine in 1889 using compressed air, intending to use it in powered flight. Materials weight and lack of quality machining prevented it becoming an effective power unit. Stephen M. Balzer of New York,

5696-519: The poor quality of the German powerplant, which was prone to wearing out after only a few hours of combat flight. The favourable power-to-weight ratio of the rotaries was their greatest advantage. While larger, heavier aircraft relied almost exclusively on conventional in-line engines, many fighter aircraft designers preferred rotaries right up to the end of the war. Rotaries had a number of disadvantages, notably very high fuel consumption, partially because

5785-511: The power of its twinned M-2 rotary engines. Although rotary engines were mostly used in aircraft, a few cars and motorcycles were built with rotary engines. Perhaps the first was the Millet motorcycle of 1892. A famous motorcycle, winning many races, was the Megola , which had a rotary engine inside the front wheel. Another motorcycle with a rotary engine was Charles Redrup 's 1912 Redrup Radial , which

5874-402: The presence of the fuel, and its gum-forming tendency was irrelevant in a total-loss lubrication system. An unfortunate side-effect was that World War I pilots inhaled and swallowed a considerable amount of the oil during flight, leading to persistent diarrhoea . Flying clothing worn by rotary engine pilots was routinely soaked with oil. The rotating mass of the engine also made it, in effect,

5963-510: The principle of a rotary engine, in that its "cylinder block" rotated. This was soon replaced by a version with the same cylinders and cam, but with stationary cylinders and the cam track rotating in lieu of a crankshaft. A later version abandoned the cam altogether and used three coupled crankshafts. By 1930 the Soviet helicopter pioneers, Boris N. Yuriev and Alexei M. Cheremukhin, both employed by Tsentralniy Aerogidrodinamicheskiy Institut (TsAGI,

6052-448: The rev count rose, the rotary was putting more and more power into spinning the engine, with less remaining to provide useful thrust through the propeller. One clever attempt to rescue the design, in a similar manner to Redrup's British "reactionless" engine concept, was made by Siemens . The crankcase (with the propeller still fastened directly to the front of it) and cylinders spun counterclockwise at 900 rpm, as seen externally from

6141-431: The safety factor of a dual ignition system, and was the last known rotary engine design to use such a cylinder head valving format. The 9N also featured an unusual ignition setup that allowed output values of one-half, one-quarter and one-eighth power levels to be achieved through use of the coupe-switch and a special five-position rotary switch that selected which of the trio of alternate power levels would be selected when

6230-514: The same in 1962 with field trials commencing in 1967. The coaches were manufactured by the Integral Coach Factory at Madras and hauled by diesel locomotives . On 19 February 1969, the Government of India announced the introduction of a new express train capable of reaching speeds of up to 120 km/h (75 mph) in the railway budget . On 1 March 1969, the first Rajdhani Express

6319-452: The same. A 174 km (108 mi) segment of track in the Tughlakabad – Agra Cantonment section supports semi-high speed passenger traffic of up to 160 km/h (99 mph). The early express rail coaches were based on a prototype by a Swiss company and were termed as ICF coaches after Integral coach factory (ICF), the first coach manufacturing unit in India. These coaches, manufactured from 1955 to 2018, were largely in use till

6408-442: The stations by commercial importance into three different categories namely Non Suburban Group (NSG), Suburban Group (SG) and Halt Group (HG). These are further subdivided into subcategories based on their commercial importance (NSG 1-6, SG 1-3 and from HG 1-3). The commercial importance of a station is determined by taking into account its passenger footfall, earnings and strategic importance and these categories are used to determine

6497-477: The time needed for turnaround at the terminal station with faster acceleration and deceleration, enabling the train to travel at a top speed for longer distance. Coaches are manufactured by five manufacturing units of the Indian Railways and public sector companies BEML and BHEL. The coaching stock have unique five or six digit identifiers. Till 2018, the first two digits indicating the year of manufacture and

6586-600: The time the war ended, the rotary engine had become obsolete, and it disappeared from use quite quickly. The British Royal Air Force probably used rotary engines for longer than most other operators. The RAF's standard post-war fighter, the Sopwith Snipe , used the Bentley BR2 rotary as the most powerful (at some 230 hp (170 kW)) rotary engine ever built by the Allies of World War I . The standard RAF training aircraft of

6675-779: The train are: The train has mordern LHB rakes with a maximum speed of 110 km/h. The train consists of 22 coaches: Both trains are hauled by a Gonda Loco Shed based WAP-7 electric locomotive from Sambalpur to Gorakhpur and vice versa. Train used to reverse its direction once at; But the Chandrapura Junction line has once again resumed. The train does not touch NSC Bose Gomoh any more. It runs with 4 Sleeper coaches, 3 Second sitting coaches, 10 III AC Coaches, 2 II AC Tier Coach and 1 AC First cum II Tier AC Coach along with 1 Divyangjan Cum Guard Coach & 1 Generator Car. New route of maurya Express sambalpur(SBP)To Hatia(HTE) To Gorakhpur(GKP) This Indian express train article

6764-401: The two types of engine. Like "fixed" radial engines, rotaries were generally built with an odd number of cylinders (usually 5, 7 or 9), so that a consistent every-other-piston firing order could be maintained, to provide smooth running. Rotary engines with an even number of cylinders were mostly of the "two row" type. Most rotary engines were arranged with the cylinders pointing outwards from

6853-458: The valve tappet rollers, a system later abandoned due to valves burning. The weight of the Monosoupape was slightly less than the earlier two-valve engines, and it used less lubricating oil. The 100 hp Monosoupape was built with 9 cylinders, and developed its rated power at 1,200 rpm. The later 160 hp nine-cylinder Gnome 9N rotary engine used the Monosoupape valve design while adding

6942-478: The weight down by machining components from solid metal, using the best American and German machine tools to create the engine's components; the cylinder wall of a 50 hp Gnome was only 1.5 mm (0.059 inches) thick, while the connecting rods were milled with deep central channels to reduce weight. While somewhat low powered in terms of units of power per litre, its power-to-weight ratio was an outstanding 1 hp (0.75 kW) per kg. The following year, 1909,

7031-508: Was a three-cylinder 303 cc rotary engine fitted to a number of motorcycles by Redrup. In 1904 the Barry engine , also designed by Redrup, was built in Wales: a rotating 2-cylinder boxer engine weighing 6.5 kg was mounted inside a motorcycle frame. The early-1920s German Megola motorcycle used a five-cylinder rotary engine within its front wheel design. In the 1940s Cyril Pullin developed

7120-513: Was approved by the government. In April 2016, the WAP-5 hauled Gatimaan Express became the fastest commercial train in India, with a maximum operational speed of 160 km/h (99 mph). In 2018, Integral Coach Factory in Chennai, rolled out a semi-high-speed EMU train-set , capable of reaching 180 km/h (110 mph). In 2019, the first Vande Bharat Express entered commercial service with

7209-463: Was credited as the first engine able to run for ten hours between overhauls. In 1913 the Seguin brothers introduced the new Monosoupape ("single valve") series, which replaced inlet valves in the pistons by using a single valve in each cylinder head, which doubled as inlet and exhaust valve. The engine speed was controlled by varying the opening time and extent of the exhaust valves using levers acting on

7298-667: Was done manually. Centralized computer reservation system was deployed in September 1996. The ticketing network at stations is computerized with the exception of few stations. The Indian Railways website went online in February 2000 and online ticketing was introduced on 3 August 2002 through IRCTC. Indian Railways now provides multiple channels for passengers to book tickets through website , smartphone apps , SMS , rail reservation counters at train stations, or through private ticket booking counters. Reserved tickets may be booked up to 60 days in advance and confirmed reservation tickets will show

7387-487: Was flagged off from New Delhi to Howrah , which reached a maximum speed of 120 km/h (75 mph) and completed the 1,450 km (900 mi) trip in 17 hours 20 minutes at an average speed of 84 km/h (52 mph). In 1980, the WAP-1 electric locomotives capable of reaching speeds of 130 km/h (81 mph) were introduced to haul express trains. Shatabdi Express introduced in 1988, were capable of running at

7476-409: Was joined by his brother Laurent who designed a rotary engine specifically for aircraft use, using Gnom engine cylinders. The brothers' first experimental engine is said to have been a 5-cylinder model that developed 34 hp (25 kW), and was a radial rather than rotary engine, but no photographs survive of the five-cylinder experimental model. The Seguin brothers then turned to rotary engines in

7565-1043: Was launched as Amrit Bharat Express . A high-speed rail line is under-construction between Mumbai and Ahmedabad which will become the first true high-speed rail line when completed in 2026. As of 2023 , the maximum operational speed of 160 km/h (99 mph) is achieved by Gatimaan Express and Vande Bharat Express on the above section. India Railways operates various categories of express trains including Vande Bharat Express , Rajdhani Express , Shatabdi Express , Amrit Bharat Express , Garib Rath Express , Double Decker Express , Tejas Express , Gatimaan Express , Humsafar Express , Duronto Express , Yuva Express , Uday Express , Jan Shatabdi Express , Sampark Kranti Express , Vivek Express , Rajya Rani Express , Mahamana Express , Antyodaya Express , Jan Sadharan Express , Suvidha Express and Intercity Express . As of 2022 , Indian Railways operated 2,999 express trains on average daily. In 1986, computerized ticketing and reservations were introduced before which ticketing

7654-441: Was often accomplished instead by intermittently cutting the ignition using the blip switch. Cutting cylinders using ignition switches had the drawback of letting fuel continue to pass through the engine, oiling up the spark plugs and making smooth restarting problematic. Also, the raw oil-fuel mix could collect in the cowling. As this could cause a serious fire when the switch was released, it became common practice for part or all of

7743-428: Was powered by a Gnome Omega on March 28, 1910, near Marseille . Production of Gnome rotaries increased rapidly, with some 4,000 being produced before World War I, and Gnome also produced a two-row version (the 100 h.p. Double Omega), the larger 80 hp Gnome Lambda and the 160 hp two-row Double Lambda. By the standards of other engines of the period, the Gnome was considered not particularly temperamental, and

7832-579: Was the work of the three Seguin brothers, Louis, Laurent and Augustin. They were talented engineers and the grandsons of famous French engineer Marc Seguin . In 1906 the eldest brother, Louis, had formed the Société des Moteurs Gnome to build stationary engines for industrial use, having licensed production of the Gnom single-cylinder stationary engine from Motorenfabrik Oberursel —who, in turn, built licensed Gnome engines for German aircraft during World War I. Louis

7921-399: Was widely used as an alternative to conventional inline engines ( straight or V ) during World War I and the years immediately preceding that conflict. It has been described as "a very efficient solution to the problems of power output, weight, and reliability". By the early 1920s, the inherent limitations of this type of engine had rendered it obsolete. A rotary engine is essentially

#466533