Misplaced Pages

#481518

79-515: MBASIC version 5 required a CP/M system with at least 28 KB of random-access memory (RAM) and at least one diskette drive. Unlike versions of Microsoft BASIC-80 that were customized by home computer manufacturers to use the particular hardware features of the computer, MBASIC relied only on the CP/M operating system calls for all input and output. Only the CP/M console (screen and keyboard), line printer , and disk devices were available. MBASIC in

158-416: A decimal (BCD) data type for financial calculations. All floating point operations were carried out in software since typical CP/M systems did not have floating point hardware . The built-in mathematics functions ( sine, cosine , tangent , natural log , exponential , square root ) only gave single precision results. A software pseudorandom number generator was provided; this relied on the user to key in

237-586: A BASIC program. These were typically placed in a reserved area of memory, or POKEd into string constants, as a series of machine codes ( opcodes ). MBASIC also provided hardware INP and OUT instructions that read and wrote directly to the 8080 hardware input/output ports. This could be used to control peripheral devices from a BASIC program if the system hardware permitted. Any MBASIC programs that made use of PEEK and POKE , and of machine code user functions, were not portable between machines without modifications. Besides Microsoft's BASIC-80 for CP/M,

316-550: A few dozen or few hundred bits of such memory could be provided. The first practical form of random-access memory was the Williams tube . It stored data as electrically charged spots on the face of a cathode-ray tube . Since the electron beam of the CRT could read and write the spots on the tube in any order, memory was random access. The capacity of the Williams tube was a few hundred to around

395-509: A finite number of operations it can support – for example, no FPUs directly support arbitrary-precision arithmetic . When a CPU is executing a program that calls for a floating-point operation that is not directly supported by the hardware, the CPU uses a series of simpler floating-point operations. In systems without any floating-point hardware, the CPU emulates it using a series of simpler fixed-point arithmetic operations that run on

474-863: A gate array to interface the ARM2 processor with the WE32206 to support the additional ARM floating-point instructions. Acorn later offered the FPA10 coprocessor, developed by ARM, for various machines fitted with the ARM3 processor. Coprocessors were available for the Motorola 68000 family , the 68881 and 68882 . These were common in Motorola 68020 / 68030 -based workstations , like the Sun-3 series. They were also commonly added to higher-end models of Apple Macintosh and Commodore Amiga series, but unlike IBM PC-compatible systems, sockets for adding

553-467: A hard drive. This entire pool of memory may be referred to as "RAM" by many developers, even though the various subsystems can have very different access times , violating the original concept behind the random access term in RAM. Even within a hierarchy level such as DRAM, the specific row, column, bank, rank , channel, or interleave organization of the components make the access time variable, although not to

632-424: A memory capacity that is a power of two. Usually several memory cells share the same address. For example, a 4 bit "wide" RAM chip has four memory cells for each address. Often the width of the memory and that of the microprocessor are different, for a 32 bit microprocessor, eight 4 bit RAM chips would be needed. Often more addresses are needed than can be provided by a device. In that case, external multiplexors to

711-404: A portion of a computer's RAM, allowing it to act as a much faster hard drive that is called a RAM disk . A RAM disk loses the stored data when the computer is shut down, unless memory is arranged to have a standby battery source, or changes to the RAM disk are written out to a nonvolatile disk. The RAM disk is reloaded from the physical disk upon RAM disk initialization. Sometimes, the contents of

790-404: A program and $ 40 for hardware-software combinations. The company also reserved the right to audit developers' financial records. Because authors' typical royalty rates for software was 10-25%, InfoWorld in 1980 stated that BASCOM's additional 9% royalty rate "could make software development downright unprofitable", concluding that "Microsoft has the technical solution [to CBASIC's flaws], but not

869-551: A relatively slow ROM chip are copied to read/write memory to allow for shorter access times. The ROM chip is then disabled while the initialized memory locations are switched in on the same block of addresses (often write-protected). This process, sometimes called shadowing , is fairly common in both computers and embedded systems . As a common example, the BIOS in typical personal computers often has an option called "use shadow BIOS" or similar. When enabled, functions that rely on data from

SECTION 10

#1733093751482

948-599: A seed number to obtain a sequence of numbers useful for games and some simulations. MBASIC permitted but did not require the LET keyword for assignment statements. Early versions of BASIC on microcomputers were infamous for one- or two-character variable names, which made the meanings of variables difficult to recall in complex programs. MBASIC version 5 allowed identifiers up to 40 characters long, which permitted programmers to give variables readable names. Program flow control in MBASIC

1027-529: A single MOS transistor per capacitor. The first commercial DRAM IC chip, the 1K Intel 1103 , was introduced in October 1970. Synchronous dynamic random-access memory (SDRAM) was reintroduced with the Samsung KM48SL2000 chip in 1992. Early computers used relays , mechanical counters or delay lines for main memory functions. Ultrasonic delay lines were serial devices which could only reproduce data in

1106-432: A special FPU named FlexFPU, which uses simultaneous multithreading . Each physical integer core, two per module, is single-threaded, in contrast with Intel's Hyperthreading , where two virtual simultaneous threads share the resources of a single physical core. Some floating-point hardware only supports the simplest operations: addition, subtraction, and multiplication. But even the most complex floating-point hardware has

1185-491: A switch that lets the control circuitry on the chip read the capacitor's state of charge or change it. As this form of memory is less expensive to produce than static RAM, it is the predominant form of computer memory used in modern computers. Both static and dynamic RAM are considered volatile , as their state is lost or reset when power is removed from the system. By contrast, read-only memory (ROM) stores data by permanently enabling or disabling selected transistors, such that

1264-593: A thousand bits, but it was much smaller, faster, and more power-efficient than using individual vacuum tube latches. Developed at the University of Manchester in England, the Williams tube provided the medium on which the first electronically stored program was implemented in the Manchester Baby computer, which first successfully ran a program on 21 June, 1948. In fact, rather than the Williams tube memory being designed for

1343-724: A variant of MBASIC was also available as for the ISIS-II operating system. MSX-BASIC is also a well known successor of MBASIC, featuring several extensions specific to the MSX machines. All the functions of CP/M MBASIC were available in the IBM PC disk-based BASICA or GWBASIC which made migration of programs from CP/M systems to PC-compatibles possible. The tokens used to represent keywords were different, so CP/M programs had to be saved in ASCII source form. Typically screen formatting escape sequences put into

1422-525: Is a part of a computer system specially designed to carry out operations on floating-point numbers. Typical operations are addition , subtraction , multiplication , division , and square root . Some FPUs can also perform various transcendental functions such as exponential or trigonometric calculations, but the accuracy can be low, so some systems prefer to compute these functions in software. In general-purpose computer architectures , one or more FPUs may be integrated as execution units within

1501-615: Is a type of flip-flop circuit, usually implemented using FETs . This means that SRAM requires very low power when not being accessed, but it is expensive and has low storage density. A second type, DRAM, is based around a capacitor. Charging and discharging this capacitor can store a "1" or a "0" in the cell. However, the charge in this capacitor slowly leaks away, and must be refreshed periodically. Because of this refresh process, DRAM uses more power, but it can achieve greater storage densities and lower unit costs compared to SRAM. To be useful, memory cells must be readable and writable. Within

1580-595: Is available, the CORDIC methods are most commonly used for transcendental function evaluation. In most modern computer architectures, there is some division of floating-point operations from integer operations. This division varies significantly by architecture; some have dedicated floating-point registers, while some, like Intel x86 , go as far as independent clocking schemes. CORDIC routines have been implemented in Intel x87 coprocessors ( 8087 , 80287, 80387 ) up to

1659-403: Is far more expensive than the dynamic RAM used for larger memories. Static RAM also consumes far more power. CPU speed improvements slowed significantly partly due to major physical barriers and partly because current CPU designs have already hit the memory wall in some sense. Intel summarized these causes in a 2005 document. First of all, as chip geometries shrink and clock frequencies rise,

SECTION 20

#1733093751482

1738-419: Is more expensive to produce, but is generally faster and requires less dynamic power than DRAM. In modern computers, SRAM is often used as cache memory for the CPU . DRAM stores a bit of data using a transistor and capacitor pair (typically a MOSFET and MOS capacitor , respectively), which together comprise a DRAM cell. The capacitor holds a high or low charge (1 or 0, respectively), and the transistor acts as

1817-593: Is normally associated with volatile types of memory where stored information is lost if power is removed. The two main types of volatile random-access semiconductor memory are static random-access memory (SRAM) and dynamic random-access memory (DRAM). Non-volatile RAM has also been developed and other types of non-volatile memories allow random access for read operations, but either do not allow write operations or have other kinds of limitations. These include most types of ROM and NOR flash memory . The use of semiconductor RAM dates back to 1965 when IBM introduced

1896-489: Is reduced by the size of the shadowed ROMs. The ' memory wall is the growing disparity of speed between CPU and the response time of memory (known as memory latency ) outside the CPU chip. An important reason for this disparity is the limited communication bandwidth beyond chip boundaries, which is also referred to as bandwidth wall . From 1986 to 2000, CPU speed improved at an annual rate of 55% while off-chip memory response time only improved at 10%. Given these trends, it

1975-423: Is the processor-memory performance gap, which can be addressed by 3D integrated circuits that reduce the distance between the logic and memory aspects that are further apart in a 2D chip. Memory subsystem design requires a focus on the gap, which is widening over time. The main method of bridging the gap is the use of caches ; small amounts of high-speed memory that houses recent operations and instructions nearby

2054-467: The 8-bit computers of the late '70s and early '80s would be complete without mentioning the importance of the PEEK and POKE functions for directly reading and writing to memory. Since these systems typically had no memory protection , this allowed a programmer to access portions of the operating system, or functions that would not otherwise be available. This also provided opportunities for user programs to hang

2133-493: The 80287 , and 80386/80386SX -based machines – for the 80387 and 80387SX respectively, although early ones were socketed for the 80287, since the 80387 did not exist yet. Other companies manufactured co-processors for the Intel x86 series. These included Cyrix and Weitek . Acorn Computers opted for the WE32206 to offer single , double and extended precision to its ARM powered Archimedes range, introducing

2212-542: The 80486 microprocessor series, as well as in the Motorola 68881 and 68882 for some kinds of floating-point instructions, mainly as a way to reduce the gate counts (and complexity) of the FPU subsystem. Floating-point operations are often pipelined . In earlier superscalar architectures without general out-of-order execution , floating-point operations were sometimes pipelined separately from integer operations. The modular architecture of Bulldozer microarchitecture uses

2291-570: The Atanasoff–Berry Computer , the Williams tube and the Selectron tube . In 1966, Robert Dennard invented modern DRAM architecture for which there is a single MOS transistor per capacitor. While examining the characteristics of MOS technology, he found it was capable of building capacitors , and that storing a charge or no charge on the MOS capacitor could represent the 1 and 0 of a bit, while

2370-569: The IBM 701 . This was carried forward to its successors the 709, 7090, and 7094. In 1963, Digital announced the PDP-6 , which had floating point as a standard feature. In 1963, the GE-235 featured an "Auxiliary Arithmetic Unit" for floating point and double-precision calculations. Historically, some systems implemented floating point with a coprocessor rather than as an integrated unit (but now in addition to

2449-420: The central processing unit ; however, many embedded processors do not have hardware support for floating-point operations (while they increasingly have them as standard). When a CPU is executing a program that calls for a floating-point operation, there are three ways to carry it out: In 1954, the IBM 704 had floating-point arithmetic as a standard feature, one of its major improvements over its predecessor

MBASIC - Misplaced Pages Continue

2528-432: The 1960s with bipolar memory, which used bipolar transistors . Although it was faster, it could not compete with the lower price of magnetic core memory. In 1957, Frosch and Derick manufactured the first silicon dioxide field-effect transistors at Bell Labs, the first transistors in which drain and source were adjacent at the surface. Subsequently, in 1960, a team demonstrated a working MOSFET at Bell Labs. This led to

2607-501: The BIOS's ROM instead use DRAM locations (most can also toggle shadowing of video card ROM or other ROM sections). Depending on the system, this may not result in increased performance, and may cause incompatibilities. For example, some hardware may be inaccessible to the operating system if shadow RAM is used. On some systems the benefit may be hypothetical because the BIOS is not used after booting in favor of direct hardware access. Free memory

2686-540: The Baby, the Baby was a testbed to demonstrate the reliability of the memory. Magnetic-core memory was invented in 1947 and developed up until the mid-1970s. It became a widespread form of random-access memory, relying on an array of magnetized rings. By changing the sense of each ring's magnetization, data could be stored with one bit stored per ring. Since every ring had a combination of address wires to select and read or write it, access to any memory location in any sequence

2765-465: The CP/M convention of CR / LF at the end of each line) or else as fixed-record-length random access files, which, given a sufficiently determined programmer, could be used to perform database-type record manipulation. The Microsoft Binary Format for floating point numbers was proprietary to the implementation, which meant that data could only be interchanged with other programs using ASCII text representation or else with extensive programming to convert

2844-414: The CP/M interpreter. Random-access memory Random-access memory ( RAM ; / r æ m / ) is a form of electronic computer memory that can be read and changed in any order, typically used to store working data and machine code . A random-access memory device allows data items to be read or written in almost the same amount of time irrespective of the physical location of data inside

2923-793: The CP/M operating system itself all had to share the 64 kilobyte address space of the 8080 processor. Typically when first starting MBASIC there would be less than 32 kB memory available for programs and data, even on a machine equipped with a full 64 kilobytes of RAM. Comment lines, prefixed with the REM keyword or an apostrophe, could be placed in the program text but took up valuable memory space, which discouraged BASIC users from fully documenting their code. To allow larger and more complex programs to be run, later versions of MBASIC supported functions that allowed portions of program text to be read in and executed under program control (the " CHAIN " and MERGE statements). No support for "shell" command execution

3002-470: The CP/M version would be replaced with the cursor positioning commands found in the PC versions of BASIC, otherwise little rewriting would be needed. Microsoft sold a CP/M BASIC compiler (known as BASCOM ) which used a similar source language to MBASIC. A program debugged under MBASIC could be compiled with BASCOM. Since program text was no longer in memory and the run-time elements of the compiler were smaller than

3081-464: The CPU, e.g. GPUs  – that are coprocessors not always built into the CPU ;– have FPUs as a rule, while first generations of GPUs did not). This could be a single integrated circuit , an entire circuit board or a cabinet. Where floating-point calculation hardware has not been provided, floating-point calculations are done in software, which takes more processor time, but avoids

3160-402: The MOS transistor could control writing the charge to the capacitor. This led to his development of a single-transistor DRAM memory cell. In 1967, Dennard filed a patent under IBM for a single-transistor DRAM memory cell, based on MOS technology. The first commercial DRAM IC chip was the Intel 1103 , which was manufactured on an 8   μm MOS process with a capacity of 1   kbit , and

3239-486: The RAM comes in an easily upgraded form of modules called memory modules or DRAM modules about the size of a few sticks of chewing gum. These can be quickly replaced should they become damaged or when changing needs demand more storage capacity. As suggested above, smaller amounts of RAM (mostly SRAM) are also integrated in the CPU and other ICs on the motherboard , as well as in hard-drives, CD-ROMs , and several other parts of

MBASIC - Misplaced Pages Continue

3318-444: The RAM device, multiplexing and demultiplexing circuitry is used to select memory cells. Typically, a RAM device has a set of address lines A 0 , A 1 , . . . A n {\displaystyle A_{0},A_{1},...A_{n}} , and for each combination of bits that may be applied to these lines, a set of memory cells are activated. Due to this addressing, RAM devices virtually always have

3397-575: The SP95 memory chip for the System/360 Model 95 . Dynamic random-access memory (DRAM) allowed replacement of a 4 or 6-transistor latch circuit by a single transistor for each memory bit, greatly increasing memory density at the cost of volatility. Data was stored in the tiny capacitance of each transistor, and had to be periodically refreshed every few milliseconds before the charge could leak away. Toshiba 's Toscal BC-1411 electronic calculator , which

3476-458: The binary format. MBASIC supported the following data types: String operators included substring selection, concatenation, assignment, and testing for equality. Arrays of the above types were allowed with up to 7 dimensions, but no functions or operators worked on arrays; for example, there was no assignment of arrays. Unlike some other BASIC implementations of the time, MBASIC did not provide support for matrix operations, complex numbers , or

3555-405: The computer system. In addition to serving as temporary storage and working space for the operating system and applications, RAM is used in numerous other ways. Most modern operating systems employ a method of extending RAM capacity, known as "virtual memory". A portion of the computer's hard drive is set aside for a paging file or a scratch partition , and the combination of physical RAM and

3634-434: The cost of the extra hardware. For a particular computer architecture, the floating-point unit instructions may be emulated by a library of software functions; this may permit the same object code to run on systems with or without floating-point hardware. Emulation can be implemented on any of several levels: in the CPU as microcode , as an operating system function, or in user-space code. When only integer functionality

3713-448: The development of metal–oxide–semiconductor (MOS) memory by John Schmidt at Fairchild Semiconductor in 1964. In addition to higher speeds, MOS semiconductor memory was cheaper and consumed less power than magnetic core memory. The development of silicon-gate MOS integrated circuit (MOS IC) technology by Federico Faggin at Fairchild in 1968 enabled the production of MOS memory chips . MOS memory overtook magnetic core memory as

3792-408: The device are used to activate the correct device that is being accessed. RAM is often byte addressable, although it is also possible to make RAM that is word-addressable. One can read and over-write data in RAM. Many computer systems have a memory hierarchy consisting of processor registers , on- die SRAM caches, external caches , DRAM , paging systems and virtual memory or swap space on

3871-437: The dominant memory technology in the early 1970s. Integrated bipolar static random-access memory (SRAM) was invented by Robert H. Norman at Fairchild Semiconductor in 1963. It was followed by the development of MOS SRAM by John Schmidt at Fairchild in 1964. SRAM became an alternative to magnetic-core memory, but required six MOS transistors for each bit of data. Commercial use of SRAM began in 1965, when IBM introduced

3950-405: The economic one". MBASIC was an important tool during the era of 8-bit CP/M computers. Skilled users could write routines in MBASIC to automate tasks that in modern-day systems would be performed by powerful application program commands or scripting languages. Exchange of useful MBASIC programs was a common function of computer users' groups . Keying in long BASIC listings from a magazine article

4029-510: The execution of those instructions. In the 1980s, it was common in IBM PC /compatible microcomputers for the FPU to be entirely separate from the CPU , and typically sold as an optional add-on. It would only be purchased if needed to speed up or enable math-intensive programs. The IBM PC, XT , and most compatibles based on the 8088 or 8086 had a socket for the optional 8087 coprocessor. The AT and 80286 -based systems were generally socketed for

SECTION 50

#1733093751482

4108-410: The extent that access time to rotating storage media or a tape is variable. The overall goal of using a memory hierarchy is to obtain the fastest possible average access time while minimizing the total cost of the entire memory system (generally, the memory hierarchy follows the access time with the fast CPU registers at the top and the slow hard drive at the bottom). In many modern personal computers,

4187-412: The fundamental building block of computer memory . The memory cell is an electronic circuit that stores one bit of binary information and it must be set to store a logic 1 (high voltage level) and reset to store a logic 0 (low voltage level). Its value is maintained/stored until it is changed by the set/reset process. The value in the memory cell can be accessed by reading it. In SRAM, the memory cell

4266-609: The gap between RAM and hard disk speeds, although RAM continues to be an order of magnitude faster, with single-lane DDR5 8000MHz capable of 128 GB/s, and modern GDDR even faster. Fast, cheap, non-volatile solid state drives have replaced some functions formerly performed by RAM, such as holding certain data for immediate availability in server farms - 1 terabyte of SSD storage can be had for $ 200, while 1 TB of RAM would cost thousands of dollars. Floating-point unit A floating-point unit ( FPU ), numeric processing unit ( NPU ), colloquially math coprocessor ,

4345-459: The integer arithmetic logic unit . The software that lists the necessary series of operations to emulate floating-point operations is often packaged in a floating-point library . In some cases, FPUs may be specialized, and divided between simpler floating-point operations (mainly addition and multiplication) and more complicated operations, like division. In some cases, only the simple operations may be implemented in hardware or microcode , while

4424-401: The interpreter, more memory was available for user data. Speed of real program execution increased about 3 fold. Developers welcomed BASCOM as an alternative to the popular but slow and clumsy CBASIC . Unlike CBASIC, BASCOM did not need a preprocessor for MBASIC source code so could be debugged interactively. A disadvantage was Microsoft's requirement of a 9% royalty for each compiled copy of

4503-541: The means of producing inductance within solid state devices, resistance-capacitance (RC) delays in signal transmission are growing as feature sizes shrink, imposing an additional bottleneck that frequency increases don't address. The RC delays in signal transmission were also noted in "Clock Rate versus IPC: The End of the Road for Conventional Microarchitectures" which projected a maximum of 12.5% average annual CPU performance improvement between 2000 and 2014. A different concept

4582-436: The memory cannot be altered. Writable variants of ROM (such as EEPROM and NOR flash ) share properties of both ROM and RAM, enabling data to persist without power and to be updated without requiring special equipment. ECC memory (which can be either SRAM or DRAM) includes special circuitry to detect and/or correct random faults (memory errors) in the stored data, using parity bits or error correction codes . In general,

4661-481: The memory, in contrast with other direct-access data storage media (such as hard disks and magnetic tape ), where the time required to read and write data items varies significantly depending on their physical locations on the recording medium, due to mechanical limitations such as media rotation speeds and arm movement. In today's technology, random-access memory takes the form of integrated circuit (IC) chips with MOS (metal–oxide–semiconductor) memory cells . RAM

4740-467: The monolithic (single-chip) 16-bit SP95 SRAM chip for their System/360 Model 95 computer, and Toshiba used bipolar DRAM memory cells for its 180-bit Toscal BC-1411 electronic calculator , both based on bipolar transistors . While it offered higher speeds than magnetic-core memory , bipolar DRAM could not compete with the lower price of the then-dominant magnetic-core memory. In 1966, Dr. Robert Dennard invented modern DRAM architecture in which there's

4819-906: The more complex operations are implemented as software. In some current architectures, the FPU functionality is combined with SIMD units to perform SIMD computation; an example of this is the augmentation of the x87 instructions set with SSE instruction set in the x86-64 architecture used in newer Intel and AMD processors. Several models of the PDP-11 , such as the PDP-11/45, PDP-11/34a, PDP-11/44, and PDP-11/70, supported an add-on floating-point unit to support floating-point instructions. The PDP-11/60, MicroPDP-11/23 and several VAX models could execute floating-point instructions without an add-on FPU (the MicroPDP-11/23 required an add-on microcode option), and offered add-on accelerators to further speed

SECTION 60

#1733093751482

4898-443: The order it was written. Drum memory could be expanded at relatively low cost but efficient retrieval of memory items requires knowledge of the physical layout of the drum to optimize speed. Latches built out of triode vacuum tubes , and later, out of discrete transistors , were used for smaller and faster memories such as registers . Such registers were relatively large and too costly to use for large amounts of data; generally only

4977-571: The paging file form the system's total memory. (For example, if a computer has 2 GB (1024 B) of RAM and a 1 GB page file, the operating system has 3 GB total memory available to it.) When the system runs low on physical memory, it can " swap " portions of RAM to the paging file to make room for new data, as well as to read previously swapped information back into RAM. Excessive use of this mechanism results in thrashing and generally hampers overall system performance, mainly because hard drives are far slower than RAM. Software can "partition"

5056-577: The processor, speeding up the execution of those operations or instructions in cases where they are called upon frequently. Multiple levels of caching have been developed to deal with the widening gap, and the performance of high-speed modern computers relies on evolving caching techniques. There can be up to a 53% difference between the growth in speed of processor and the lagging speed of main memory access. Solid-state hard drives have continued to increase in speed, from ~400 Mbit/s via SATA3 in 2012 up to ~7 GB/s via NVMe / PCIe in 2024, closing

5135-435: The same type, simply because it takes longer for signals to traverse a larger circuit. Constructing a memory unit of many gibibytes with a response time of one clock cycle is difficult or impossible. Today's CPUs often still have a mebibyte of 0 wait state cache memory, but it resides on the same chip as the CPU cores due to the bandwidth limitations of chip-to-chip communication. It must also be constructed from static RAM, which

5214-454: The screen for editing, or saved to disk in either a compressed binary format or as plain ASCII text. Every source line was identified with a number, which could be used as the target of a GOTO or GOSUB transfer. Only line editing commands were provided. It was often beneficial to save a program as plain text and edit it with a full featured editor. Program text, variables , disk buffers and

5293-400: The system (by accident, usually). For example, a CP/M programmer might use a POKE function to allow BASIC to switch the console device to the serial port, if the system BIOS supported this. For machines with real-time clocks, a set of PEEK instructions might have been used to access the time. For more complex operations, MBASIC allowed user-defined functions that could be called from

5372-400: The term RAM refers solely to solid-state memory devices (either DRAM or SRAM), and more specifically the main memory in most computers. In optical storage, the term DVD-RAM is somewhat of a misnomer since, it is not random access; it behaves much like a hard disc drive if somewhat slower. Aside, unlike CD-RW or DVD-RW , DVD-RAM does not need to be erased before reuse. The memory cell is

5451-558: The transistor leakage current increases, leading to excess power consumption and heat... Secondly, the advantages of higher clock speeds are in part negated by memory latency, since memory access times have not been able to keep pace with increasing clock frequencies. Third, for certain applications, traditional serial architectures are becoming less efficient as processors get faster (due to the so-called von Neumann bottleneck ), further undercutting any gains that frequency increases might otherwise buy. In addition, partly due to limitations in

5530-507: The uncustomized form had no functions for graphics , color, joysticks, mice, serial communications , networking , sound, or even a real-time clock function. MBASIC did not fully support the features of the host CP/M operating system, for example, it did not support CP/M's user areas for organizing files on a diskette. Since CP/M systems were typically single-user and stand alone, there was no provision for file or record locking, or any form of multitasking . Apart from these limitations, MBASIC

5609-494: Was Samsung's 64   Mbit DDR SDRAM chip, released in June 1998. GDDR (graphics DDR) is a form of DDR SGRAM (synchronous graphics RAM), which was first released by Samsung as a 16   Mbit memory chip in 1998. The two widely used forms of modern RAM are static RAM (SRAM) and dynamic RAM (DRAM). In SRAM, a bit of data is stored using the state of a six- transistor memory cell , typically using six MOSFETs. This form of RAM

5688-446: Was considered at the time to be a powerful and useful implementation of BASIC. MBASIC is an interpreter . Program source text was stored in memory in tokenized form, with BASIC keywords replaced by one-byte tokens which saved memory space and speeded execution. Any line prefixed with a line number was stored as program text; BASIC statements not prefixed with a line number were executed immediately as commands. Programs could be listed on

5767-445: Was controlled by IF...THEN...ELSE... conditional tests, WHILE...WEND loops, and GOTO and GOSUB instructions. No CASE statement was available, although an ON...GOTO... (computed GOTO) provided multi-way branches. Subroutines had no parameters and all variables were global. MBASIC did not make structured programming mandatory for programmers and it was easy to write spaghetti code . No discussion of BASICs on

5846-445: Was expected that memory latency would become an overwhelming bottleneck in computer performance. Another reason for the disparity is the enormous increase in the size of memory since the start of the PC revolution in the 1980s. Originally, PCs contained less than 1 mebibyte of RAM, which often had a response time of 1 CPU clock cycle, meaning that it required 0 wait states. Larger memory units are inherently slower than smaller ones of

5925-410: Was introduced in 1965, used a form of capacitor-bipolar DRAM, storing 180-bit data on discrete memory cells , consisting of germanium bipolar transistors and capacitors. While it offered higher speeds than magnetic-core memory, bipolar DRAM could not compete with the lower price of the then dominant magnetic-core memory. Capacitors had also been used for earlier memory schemes, such as the drum of

6004-477: Was one way of "bootstrapping" software into a new CP/M system. At least one compiler for a high-level language was written in MBASIC, and many small games and utility programs ranging from a few lines to a few thousand lines of code were written. MBASIC is also the name of a commercial BASIC compiler for the Microchip Technology PIC microcontroller family developed by Basic Micro, Inc., unrelated to

6083-460: Was possible. Magnetic core memory was the standard form of computer memory until displaced by semiconductor memory in integrated circuits (ICs) during the early 1970s. Prior to the development of integrated read-only memory (ROM) circuits, permanent (or read-only ) random-access memory was often constructed using diode matrices driven by address decoders , or specially wound core rope memory planes. Semiconductor memory appeared in

6162-495: Was provided, though this functionality could be duplicated by a determined programmer. A particular advantage of MBASIC was the full-text error messages provided for syntax and run-time errors. MBASIC also had a "trace" function that displayed line numbers as they were executed. While this occupied the same screen space as normal program output, it was useful for detecting conditions such as endless loops . Data could be read and stored to disk as either sequential files (delimited by

6241-433: Was released in 1970. The earliest DRAMs were often synchronized with the CPU clock (clocked) and were used with early microprocessors. In the mid-1970s, DRAMs moved to the asynchronous design, but in the 1990s returned to synchronous operation. In 1992 Samsung released KM48SL2000, which had a capacity of 16   Mbit . and mass-produced in 1993. The first commercial DDR SDRAM ( double data rate SDRAM) memory chip

#481518