The Ford Festiva is a subcompact car manufactured by Mazda and marketed by Ford for model years 1986-2002, over three generations in Japan , the Americas , and Australia as the Festiva — and notably, as the Aspire in its North American second generation.
79-643: Designed by Mazda using the DA platform and B series inline-four engines , the Festiva was manufactured in South Korea by Kia , under license. Kia began marketing the first generation in South Korea under license — as the Kia Pride . Australasia and Europe received the first version between 1987 and 1991 as the " Mazda 121 ". After 1991, Australasian sales began under the "Ford Festiva" name, while European sales continued as
158-612: A badge-engineered version of the Mazda Demio . The "Festiva" namelplate derived from the Spanish word for " festive ". The first generation Ford Festiva was designed by Mazda in Japan at the request of parent company Ford . The Mazda-designed and built three-door hatchback was launched in Japan in February 1986 under the name "Ford Festiva", with the 1.1 and 1.3-liter engines. Festiva utilized
237-406: A tachometer , and aluminum wheels. The Avella was the first South Korean car in its class to offer dual airbags and ABS-brakes. The Delta version received a slightly reworked front end from its hatchback siblings. While the standard Avellas received the 73 PS (54 kW) 1.3 liter Mazda B3 engine, higher spec versions were available both with an SOHC and a more powerful DOHC version of
316-652: A commonplace feature on them). There was also a panel van two-seater version in the UK and some other markets. Fuel injection appeared on the 1.3-litre-engined models in November 1994, referred to as the "1.3i". At this time, the 1.1-litre version was deleted. December 1995 saw the Start 1.3i three-door replace the L, and the Pride was then briefly discontinued in the UK in January 1999. In June 1999, it
395-504: A different VIN format and model code naming scheme. The model families were given two characters, and the model a third, based on their names. The following pre-1981 model groups are known: The next digit of the VIN specified the engine: The rear multi-link suspension is remarkably similar to the "E type" found in the HC's platform. Although also similar to Ford's own design, Mazda engineers said this
474-571: A hydraulic system to assist the driver of the vehicle . Sensors detect the position and torque exerted inside the steering column, and a computer module applies assistive torque via the motor, which connects either to the steering gear or steering column. This allows varied amounts of assistance to be applied depending on driving conditions. Engineers can therefore tailor steering-gear response to variable-rate and variable-damping suspension systems, optimizing ride, handling, and steering for each vehicle. This new technological feature also gave engineers
553-619: A new front bumper with an oval grille, reshaped headlamps, and other minor changes. The Aspire was dropped from the Ford range in the United States after 1997. The second generation Festiva continued to be sold in Australia until 2000 when it was replaced by the Ford Ka . Australian second-generation Festivas have U.S. side marker light cut-outs on each side of the vehicle (driver-side and passenger-side) at
632-705: A new generation Mazda 121, based on the Japanese market Autozam Revue . The Kia Pride badged version of the Festiva was manufactured in South Korea by Kia Motors from March 1987 to January 2000. Prior to its South Korean market release, exports as the Festiva had begun in December 1986 to Japan and the United States. The Pride was sold in four-door sedan form (in LX, GTX, and β trim levels), as well as three- and five-door hatchback forms (the CD-5) and five-door wagon body styles. The original Pride
711-524: A rack assist without a clutch was put into practical use in the Honda NSX (initially installed in automatics only). Since then, there has been a transition of trend from brush-attached motors to brushless motors in the rack type for ordinary vehicles and this method has become the mainstream. Other electric power steering systems (including 4WS) later appeared on the Honda NSX after 1990, the Honda Prelude and
790-590: A sporting package that consisted of fog lights, rear spoiler, alloy wheels, blue face instrument cluster with tachometer, and upgraded interior trim. The Aspire had very few options for the base model: cassette player, automatic transmission, rear defrost and wiper, alloy wheels, and a comfort and convenience package that had several minor interior upgrades. Due to slow sales the SE model was dropped after 1995 along with all of its optional equipment. The base model also lost its optional alloy wheels and rear wiper. The performance with
869-414: A two-part frame with a rugged hinge in the middle; this hinge allows the front and rear axles to become non-parallel to steer the vehicle. Opposing hydraulic cylinders move the halves of the frame relative to each other to steer. The first power steering system on a vehicle was apparently installed in 1876 by a man with the surname of Fitts, but little else is known about him. The next power steering system
SECTION 10
#1733085564390948-455: Is a revival of the "E type" multi-link. Basis for Besturn B70 . Power steering Power steering is a system for reducing a driver's effort to turn a steering wheel of a motor vehicle , by using a power source to assist steering . Hydraulic or electric actuators add controlled energy to the steering mechanism, so the driver can provide less effort to turn the steered wheels when driving at typical speeds, and considerably reduce
1027-510: Is proportional to road speed, so that at low speeds the steering is very light, and at high speeds it is very difficult to move more than a small amount off centre. It was invented by Citroën of France. This system was first introduced in the Citroën SM in 1970, and was known as 'VariPower' in the UK and 'SpeedFeel' in the U.S. Electro-hydraulic power steering systems, sometimes abbreviated EHPS, and also sometimes called "hybrid" systems, use
1106-470: Is required or not, and this is a major reason for their introduction. Another major advantage is the elimination of a belt-driven engine accessory, and several high-pressure hydraulic hoses between the hydraulic pump, mounted on the engine, and the steering gear, mounted on the chassis. This greatly simplifies manufacturing and maintenance. By incorporating electronic stability control electric power steering systems can instantly vary torque assist levels to aid
1185-405: Is the medium by which pressure is transmitted. Common working liquids are based on mineral oil . Some modern systems also include an electronic control valve to reduce the hydraulic supply pressure as the vehicle's speed increases; this is variable-assist power steering. DIRAVI innovated the now common benefit of speed sensitive steering . In this power steering system, the force steering
1264-689: The Canadian Intellectual Property Office in 1958. Starting in the mid-1950s American manufacturers offered the technology as optional or standard equipment while it is widely offered internationally on modern vehicles, owing to the trends toward front-wheel drive , greater vehicle mass, reduced assembly line production costs, and wider tires , which all increase the required steering effort. Heavier vehicles, as are common in some countries, would be extremely difficult to maneuver at low speeds, while vehicles of lighter weight may not need power assisted steering at all. A study in 1999 on
1343-517: The Golf Mk3 Ecomatic , with an electric pump. This meant that the power steering would still operate while the engine was stopped by the computer to save fuel. Electro-hydraulic systems can be found in some cars by Ford , Volkswagen , Audi , Peugeot , Citroën , SEAT , Škoda , Suzuki , Opel , MINI , Toyota , Honda , and Mazda . Electric power steering ( EPS ) or motor-driven power steering ( MDPS ) uses an electric motor instead of
1422-493: The electronic stability control system to alter steering gear ratios and steering assist levels. In 2003, BMW introduced " active steering " system on the 5 Series . This system should not be confused with variable assist power steering, which varies steering assist torque, not steering ratios, nor with systems where the gear ratio is only varied as a function of steering angle. These last are more accurately called non-linear types (e.g. Direct-Steer offered by Mercedes-Benz );
1501-438: The front-wheel drive layout, and its mechanicals consisted of rack and pinion steering, independent front suspension with struts , coil springs and sway bar , and a torsion beam rear suspension . The Festiva was facelifted in 1989, receiving a redesigned grille insert and tail lamp lenses. In Japan at launch, the Festiva three-door was offered in L, L Special, S, Ghia, and Canvas Top specification levels. Ford retailed
1580-568: The "Kia Pride". Kia ended production of the Pride in 2000. Ongoing production of the first generation overlapped its second generation, introduced in 1993 and marketed prominently as the Ford Aspire in North America and as the Kia Avella in South Korea and other markets. The second generation was marketed for model years 1993-2000, and a third generation was sold between 1996 and 2002 in Japan as
1659-590: The "shades" trim. The European premiere for the 121 was at the Geneva Auto Salon in March 1988. The 1.1-liter version was added in July 1989. Trim levels were L and LX, with an SR version also available in the UK. In Europe, the car's ventilation system, developed with American consumers in mind, was notable for its refinement for the class. An interesting design feature was that the rear seat back could be reclined somewhat, and
SECTION 20
#17330855643901738-501: The "significantly worse than average" terminology used in 2008). The Ford Aspire was sold in North America from 1994 until 1997. It was the replacement for the Ford Festiva. It was the first car in its class to have dual airbags standard and anti-lock brakes optional. It came in two and four door body styles, both hatchbacks. The 2-door was available in base and SE trim while the 4-door was only available in base trim. The SE model offered
1817-405: The 1.5 liter B5 engine. The 105 PS (77 kW) DOHC version was only available in the four-door Avella Delta. Five-speed manuals as well as three- or four-speed automatic transmissions were available. Sales of the second generation Festiva ended in 1996 for the Japanese market, being replaced by generation three—a badge engineered Mazda Demio (DW). Known as the "Ford Festiva Mini Wagon",
1896-436: The 121 as a single three-door hatchback body variant in 1987 to sit below the larger 323 model. Despite being manufactured there, the 121 was not sold in Japan under the "Mazda" brand. Australian specification 121s were fitted with the 1.3-liter B3 engine, mated to a five-speed manual transmission. European markets also received the 55 PS (40 kW) 1.1-liter B1 engine with a four-speed manual transmission. The 121
1975-594: The 1980s. The company's model codes form the fourth and fifth characters of the VIN on post-1981 vehicles. The first character is a letter representing the model family, while the second is a sequential letter for subsequent models. For example, the Mazda N family used by the Mazda Miata started at NA and was updated in 1998 to NB and in 2006 to NC. The 2016 and newer MX-5s are designated ND. Mazda generally starts car model codes at
2054-604: The Beck Roadster kit car) built the Festiva Shogun . Inspired by the Australian Giocattolo project, they started a company called Special Editions, Inc., to produce a limited run of 250 cars. These cars were powered by a mid-mounted Yamaha V6 sourced from the first generation Ford Taurus SHO , producing 220 hp (164 kW). The Festiva Shogun was displayed in the Ford tent at the 1990 Monterey Historics and Ford
2133-563: The British and American armies. Chrysler Corporation introduced the first commercially available passenger car power steering system on the 1951 Chrysler Imperial under the name "Hydraguide". The Chrysler system was based on some of Davis' expired patents. General Motors introduced the 1952 Cadillac with a power steering system using the work Davis had done for the company almost twenty years earlier. Charles F. Hammond from Detroit filed several patents for improvements of power steering with
2212-430: The Festiva under license as the "Kia Pride". Starting from late 1987 for the 1988 model year , Kia began exports to the United States under the "Ford Festiva" name. Canadian sales began in January 1989, marketed at Ford and Mercury dealerships. Ford offered a single 1.3-liter B3 four-cylinder engine and three trim levels: L, L Plus, and LX. The two base models featured a four-speed manual overdrive transmission, with
2291-629: The Japanese market Festiva via the Autorama dealership network. At the 1986 Tokyo Motor Show , the sporty GT and GT-X models were shown, with a unique twin-cam 1.3-liter engine (BJ). It has a special body kit and a prominent bonnet bulge, and went on sale on 1 December 1986. By then, the Festiva Cargo L (commercial version) had also been added to the lineup, in either a two- or a five-seat version. Beginning in 1989, Autorama also began selling left-hand drive, Korean-assembled five-door hatchbacks (and later
2370-572: The Japanese-only model range consisted of a single five-door hatchback body style available with either a 1.3- or 1.5-liter engine. Transmission options were a three-speed or four-speed automatic and a five-speed manual. Production continued until Mazda ceased manufacture of the equivalent Demio in 2002. [REDACTED] Media related to Ford Festiva at Wikimedia Commons Mazda D platform#DA This list of Mazda model codes describes following model codes which have been used by Mazda since
2449-489: The Kia Pride in 1991 under their own name. These additional sedan and five-door hatchback body variants were also imported from South Korea to Japan in left-hand drive form (Japan officially being a right-hand drive market) as the "Ford Festiva 5" (from May 1991) and "Festiva β", respectively. In Taiwan , it was assembled using complete knock-down kits from 1989 via the local joint venture Ford Lio Ho . Mazda began selling
Ford Festiva - Misplaced Pages Continue
2528-561: The Kia Rio, completely independently, and finished their relationship with Ford. Like the first generation, the 2008 edition of the Used Car Safety Ratings (UCSR) by Monash University in Australia found the second series Festiva to provide a "worse than average" (two out of five stars) safety protection level in the event of an accident. In the 2010 edition, the scoring was downgraded to "very poor" (equivalent to one of five stars, or
2607-421: The LX upgraded to a five-speed unit. A tachometer and tilt steering wheel also featured on the LX trim, as did alloy wheels , remote mirrors , cloth interior seating, and an AM / FM cassette radio. Ford released a minor facelift in North America for the 1990 model year, shifting from carburetor to fuel injection with five-speed manual or optional three-speed automatic transmissions. Ford also replaced
2686-505: The Pride in 1997. The sedan was called the Yueda Kia Pride YQZ6390, the hatchback either YQZ6370 or YQZ7141. Chinese production ended in December 2003. The second model Ford Festiva, launched in 1993, was jointly developed between Kia and Ford, retaining most of the drivetrain of the previous model with a more rounded body style. This new Festiva was slightly longer, wider, more aerodynamic, and suspended by MacPherson struts in
2765-554: The Pride in Cairo, Egypt, circa 1998. The Kia Pride firstly involved in a joint venture in Zhuhai, Guangdong Province with automobile company Guangtong Motors, where they were producing cars under a licence. The batch of cars would firstly be imported into China where parts are brought in later and the company would assemble the finished product. Jiangsu Yueda Auto Works (later Yueda Kia Motors, currently Jiangsu Yueda Kia Motors ) began assembly of
2844-607: The RZ 450e featuring a steer-by-wire system which eliminates the mechanical linkage between the steering wheel and the wheels, marking a significant advancement in power steering technology. In 2000, the Honda S2000 Type V featured the first electric power variable gear ratio steering (VGS) system. In 2002, Toyota introduced the "Variable Gear Ratio Steering" (VGRS) system on the Lexus LX 470 and Landcruiser Cygnus, and also incorporated
2923-560: The SAIPA 141, while continuing to sell the Iranian version of the Pride under the names SAIPA Saba GLXi (four-door sedan), SAIPA Nasim Safari (five-door wagon) and SAIPA Nasim DMi (five-door hatchback). Compared to these versions, the SAIPA 141 features revised rear styling with a longer liftback tail, and different interior design. Beginning in 2007, the SAIPA 141 was assembled and sold in Venezuela under
3002-897: The Subaru SVX in 1991, the Nissan 300ZX (Z32; after the Version 3 onwards), Silvia, Skyline, and the Laurel in 1993, the MG F, the FIAT Punto Mk2 in 1999, the Honda S2000 in 1999, Toyota Prius in 2000, the BMW Z4 in 2002, and the Mazda RX-8 in 2003. The system has been used by various automobile manufacturers, and most commonly applied for smaller cars to reduce fuel consumption and manufacturing costs . In 2023, Lexus introduced
3081-567: The United States. The agreement with Ford materialized in accordance with Kia's strategy implemented in the mid-1980s to progressively fill the void at the low-cost end of the market slowly being abdicated by the Japanese brands pursuing more expensive models with higher profit margins. Compared to rival automakers in Japan, and also Europe and North America, Kia's main competitive advantage was its lower-paid South Korean workforce—which translated into lower-priced cars. The 2008 edition of Monash University 's Used Car Safety Ratings (UCSR), found that
3160-426: The ability to add new driver assistance features. This includes features such as lane assist, wind drift correction, etc. On Fiat group cars the amount of assistance can be regulated using a button named "CITY" that switches between two different assist curves, while most other EPS systems have variable assist. These give more assistance as the vehicle slows down, and less at faster speeds. A mechanical linkage between
3239-461: The automatic was slower than the manual, with 0–60 mph times of 16.2 seconds. Power steering was only available with the 5-door automatic. The Aspire was given a facelift in 1997 with redesigned front and rear bumpers, a new radio, and new seat facings. The Aspire was discontinued after 1997, due to slow sales. The version of the Festiva sold in Korea, from March 1994, was badged "Kia Avella". "Avella"
Ford Festiva - Misplaced Pages Continue
3318-413: The bottom end usually resists being rotated, the bar will twist by an amount proportional to the applied torque. The difference in position between the opposite ends of the torsion bar controls a valve. The valve allows fluid to flow to the cylinder which provides steering assistance; the greater the "twist" of the torsion bar, the greater the force. Since the hydraulic pumps are positive-displacement type,
3397-417: The car as the "Ford Festiva" from Kia's South Korean production facility. Where the Mazda was sold as a three-door hatchback, the Ford was sold initially as a five-door only. From January 1993, a Festiva three-door, badged "Festiva Trio" was launched in Australia. Both versions were powered by the overhead camshaft carbureted 1.3-liter B3 engine with the five-speed manual transmission; a three-speed automatic
3476-492: The driver in corrective maneuvers. In 1986, NSK put the world’s first electric power steering system for battery forklifts into practical use. In 1988, Koyo Seiko (currently JTEKT) and NSK co-developed a column system exclusively for minicars sold only in the domestic market of Japan. The first-ever electric power steering system for mass-produced passenger cars appeared on the Suzuki Cervo in 1988. However, this simple method
3555-450: The driver, steering assist loss may or may not lead to a crash. The difficulty of steering with inoperative power steering is compounded by the choice of steering ratios in assisted steering gears vs. fully manual. The NHTSA has assisted car manufacturers with recalling EPS systems prone to failure. Electric systems have an advantage in fuel efficiency because there is no belt-driven hydraulic pump constantly running, whether assistance
3634-439: The economy slowing down because of the first Gulf War, conspired against the project taking off and only seven cars (plus the prototype) were built. Mazda began producing the Festiva as the "Mazda 121" for Australia (and Europe) in 1987, but this model was never retailed in Japan. The 121 ended production in 1990, and was officially discontinued by Mazda Australia in February 1991. From October 1991, Ford Australia began importing
3713-534: The engine stalled. In 1988, the Subaru XT6 was fitted with a unique Cybrid adaptive electro-hydraulic steering system that changed the level of assistance based on the vehicle's speed. In 1990, Toyota introduced its second-generation MR2 with electro-hydraulic power steering. This avoided running hydraulic lines from the engine (which was behind the driver in the MR2) up to the steering rack. In 1994 Volkswagen produced
3792-509: The first generation Festiva provides a "worse than average" (two out of five stars) level of safety in the event of an accident , in a comparison to other "light cars". The safety rating was not calculated solely on the basis of the protection of the vehicle's occupants, with protection for "cyclists, pedestrians and drivers of other vehicles" included to give a "better guide to the total community impact of vehicle safety." In 1990, racer/journalist Rick Titus and engineer Chuck Beck (creator of
3871-438: The first practical power steering system. Davis moved to General Motors and refined the hydraulic-assisted power steering system, but the automaker calculated it would be too expensive to produce. Davis then signed up with Bendix , a parts manufacturer for automakers. Military needs during World War II for easier steering on heavy vehicles boosted the need for power assistance on armored cars and tank-recovery vehicles for
3950-427: The flow rate they deliver is directly proportional to the speed of the engine. This means that at high engine speeds the steering would naturally operate faster than at low engine speeds. Because this would be undesirable, a restricting orifice and flow-control valve direct some of the pump's output back to the hydraulic reservoir at high engine speeds. A pressure relief valve prevents a dangerous build-up of pressure when
4029-579: The four-door sedan as well). The Hatchback was sold as the Ford Festiva 5 , while the four-door sedan was called the Festiva β . Neither version sold particularly well in Japan. 973 cars were brought in during 1989, with the aim of selling 2,000 the following year. Production of the Japanese market Ford Festiva ended in December 1992, with sales from stock continuing for another month. In mid-1986, another Ford partner, Kia Motors in South Korea began production of
SECTION 50
#17330855643904108-587: The front and a torsion beam axle in the rear. While it was sold in certain markets as a second generation Festiva, Ford renamed it the "Aspire" in North American markets, where the five-door model was offered for the first time. In South Korea, the car was badged "Kia Avella". The sedan version was mainly restricted to the South Korean market, although it was also available with Festiva badging in Taiwan. Depending on
4187-454: The front and rear. Instead of housing orange reflectors/lights at the front sides and red reflectors/lights at the rear sides, there are non-lit orange reflectors at all four locations. These redundant reflectors, coupled with the orange side indicator repeater (which is not required in the U.S., and was not included on the Aspire) make for a unique side profile. Kia developed their following model,
4266-476: The hydraulic cylinder's piston reaches the end of its stroke. The steering booster is arranged so that should the booster fail, the steering will continue to work (although the wheel will feel heavier). Loss of power steering can significantly affect the handling of a vehicle. Each vehicle owner's manual gives instructions for inspection of fluid levels and regular maintenance of the power steering system. The working liquid, also called " hydraulic fluid " or "oil",
4345-441: The letter "A", but van and truck variants often get different names, usually starting at "V". Note: The US-built Mazda6 and Tribute do not use the Mazda model code in the VIN; in its place is an AutoAlliance code. Instead of the model code letter, position four in the VIN specifies the vehicle's safety systems, and position five specifies the marque , due to being built in a multi-brand facility. Prior to 1981, Mazda used
4424-531: The manual front seat belts with motorized versions (Canadian market models kept the manual front seat belts), and fitted manual rear seat belts as standard. For the 1991 model year, the L Plus and LX models were combined into a single GL trim. Optional power steering was deleted for 1992, and the GL gained alloy wheels and an available sport package. The final 1993 model year brought no changes. Over its life, Ford marketed roughly 350,000 Kia-manufactured Festiva models in
4503-453: The market, some retained the SOHC, throttle-body injected motor, while others received an engine with a DOHC cylinder head and MPI also designed by Mazda. These engines were: Transmission options comprised a 5-speed manual transmission , although all models could be optioned with a 4-speed automatic . Australian and U.S. models were equipped with a 3-speed automatic. In 1997, the Festiva received
4582-422: The more fluid the valves allow through to the cylinder, and so the more force is applied to steer the wheels. One design for measuring the torque applied to the steering wheel has a torque sensor – a torsion bar at the lower end of the steering column. As the steering wheel rotates, so does the steering column, as well as the upper end of the torsion bar. Since the torsion bar is relatively thin and flexible, and
4661-421: The name SAIPA 151, with a 500-kilogram (1,100 lb) payload. The platform/engine of the Kia Pride also formed the basis for the Iranian P.K (2000 to 2005) and New P.K (2005 to 2007) models, which utilize Renault 5 bodies. In Iran, the Pride continues to be the most common car with approximately 40 percent of vehicles in the country being a Pride-derived SAIPA. Arab American Vehicles (AAV) manufactured
4740-452: The name Venirauto Turpial. The plan was to reach 92 percent local parts content, but this was generally regarded as unrealistic and Venirauto's total annual production generally hovered around 2,000 cars. Another variant, known as the SAIPA 132 began production in 2008 and differs from the Saba with its revised front and rear styling. The company introduced a coupe utility body style in 2008 under
4819-559: The new Avella (Ford Aspire/WB Festiva). Until the Mazda 121 was replaced in late 1990, Kia-badged cars were only exported to certain tertiary markets. The Pride was replaced by the Rio beginning in 1999. The Pride launched in the United Kingdom in June 1991, fitted with either the 1.1- B1 or 1.3-litre B3 engines. The 1.1 was only available as a three-door in the basic L trim ( whitewall tyres were
SECTION 60
#17330855643904898-406: The perceptual fidelity of steering force feedback, found that ordinary real-world truck and car drivers naturally expect an increase in feedback torque as speed increases, and for this reason early forms of power steering, which lacked such effect, were met with disapproval. Hydraulic power steering systems work by using a hydraulic system to multiply force applied to the steering wheel inputs to
4977-404: The physical effort necessary to turn the wheels when a vehicle is stopped or moving slowly. Power steering can also be engineered to provide some artificial feedback of forces acting on the steered wheels. Hydraulic power steering systems for cars augment steering effort via an actuator, a hydraulic cylinder that is part of a servo system . These systems have a direct mechanical connection between
5056-531: The power steering system. Other power steering systems (such as those in the largest off-road construction vehicles) have no direct mechanical connection to the steering linkage; they require electrical power. Systems of this kind, with no mechanical connection, are sometimes called " drive by wire " or "steer by wire", by analogy with aviation's " fly-by-wire ". In this context, "wire" refers to electrical cables that carry power and data, not thin wire rope mechanical control cables. Some construction vehicles have
5135-429: The same hydraulic assist technology as standard systems, but the hydraulic pressure comes from a pump driven by an electric motor instead of a drive belt at the engine. In 1965, Ford experimented with a fleet of "wrist-twist instant steering" equipped Mercury Park Lanes that replaced the conventional large steering wheel with two 5-inch (127 mm) rings, a fast 15:1 gear ratio, and an electric hydraulic pump in case
5214-507: The seat could be moved longitudinally, adding up to 50 litres (11 imp gal) of space to the otherwise very small luggage compartment. Mazda issued an update for the 121 (released in October 1989 for the Australian market) with a new grille insert, body-hued exterior trim, redesigned instrumentation and interior seats and trim. The Mazda variant was discontinued in 1991, being replaced by
5293-399: The steering wheel and the linkage that steers the wheels. This means that power-steering system failure (to augment effort) still permits the vehicle to be steered using manual effort alone. Electric power steering systems use electric motors to provide the assistance instead of hydraulic systems. As with hydraulic types, power to the actuator (motor, in this case) is controlled by the rest of
5372-491: The steering wheel and the steering gear is retained in EPS. In the event of component failure or power failure that causes a failure to provide assistance, the mechanical linkage serves as a back-up. If EPS fails, the driver encounters a situation where heavy effort is required to steer. This heavy effort is similar to that of an inoperative hydraulic steering assist system . Depending on the driving situation, driving skill and strength of
5451-412: The vehicle's steered (usually front) road wheels. The hydraulic pressure typically comes from a gerotor or rotary vane pump driven by the vehicle's engine. A double-acting hydraulic cylinder applies a force to the steering gear, which in turn steers the roadwheels. The steering wheel operates valves to control flow to the cylinder. The more torque the driver applies to the steering wheel and column,
5530-421: The wheels comes from the car's high pressure hydraulic system and is always the same no matter what the road speed is. Turning the steering wheel moves the wheels simultaneously to a corresponding angle via a hydraulic cylinder. In order to give some artificial steering feel, there is a separate hydraulically operated system that tries to turn the steering wheel back to centre position. The amount of pressure applied
5609-488: Was a made-up portmanteau word, combining aveo (Latin for "desire") and ella (Spanish for "she"). Available in sedan (Avella Delta), three-door and five-door hatchback body styles. Sales of the Kia Avella totalled 115,576 between 1994 and 1995 but dropped to only 27,850 in 1998. The Avella was primarily intended for export markets carrying Ford badging, as South Korean customers tended to prefer sedans over hatchbacks. It
5688-407: Was considering providing SHO engines directly; the deal fell through after executives test drove the car and deemed it a little too raucous for the company to put their imprimatur on. With the car not being an official Ford product, Special Editions had to buy SHOs from dealers and remove the engines, increasing the price by over ten percent. The price increase, the cancellation of a Japanese order, and
5767-415: Was not widely adopted by other automakers in the initial years due to the unnatural steering feel of the motor caused by the inertia at the time of rapid steering for danger avoidance in slower speed driving, as well as at the time of faster speed driving in which the electromagnetic clutch makes the steering force smaller, returning to the manual steering mode. In the year 1990, a direct full control system of
5846-452: Was only available as a three-door hatchback, while the five-door was added in June 1988. The four-door sedan model, the Pride Beta, arrived in November 1990, and the range was completed by the three-door van and five-door wagon in February 1992. In November 1993 the Pride received a minor facelift and production was also moved to Kia's Asia Motors subsidiary's Gwangju plant as Kia focused on
5925-659: Was optional for the five-door. Standard equipment in Australia included an AM/FM radio, tachometer, intermittent windscreen wipers , remote releases for the rear door and fuel tank filler door, with air-conditioning available as an option. Ford discontinued the WA Festiva in the Australian market in March 1994 in way for the WB Festiva. Ford Australia's action was paralleled in Europe where Kia started exporting three- and five-door hatchback, four-door sedan, and five-door wagon variants of
6004-523: Was put on a Columbia 5-ton truck in 1903 where a separate electric motor was used to assist the driver in turning the front wheels. Robert E. Twyford , a resident of Pittsburgh , Pennsylvania , included a mechanical power steering mechanism as part of his patent (U.S. Patent 646,477) issued on April 3, 1900 for the first four-wheel drive system. Francis W. Davis , an engineer of the truck division of Pierce-Arrow , began exploring how steering could be made easier, and in 1926 invented and demonstrated
6083-551: Was relaunched in an entry-level three-door now called S with the higher-level three- and five-doors known as the SX. Sales of the relaunched model ended in June 2000. SAIPA has built the Kia Pride in Iran under license since 1993 and using up to 85 percent local parts as the SAIPA Pride from 2001 to 2005. Since 2003, SAIPA has produced a new five-door liftback model based on the Pride called
6162-403: Was sold in Australia from March 1987. It featured a sliding rear bench seat , which increased cargo space by as much as 180 millimeters (7.1 in). Levels of trim in Australia comprised the base-line "deluxe", the "super deluxe", and the "fun top" (based on the super deluxe), featuring a large electric sliding canvas sunroof . From October 1988, the super deluxe was discontinued and replaced by
6241-691: Was sold in a very few export markets with Kia badging, such as Malta and Russia . The Kia Avella was discontinued in 1999 although production for some export markets continued until 2000; it and the Pride (first generation Festiva) were collectively replaced by the Kia Rio in 1999. All Avellas came standard with 13 inch wheels, a four-speaker stereo, heated rear glass, anti-lock brakes (ABS), driver's side airbag , and door impact beams. Optional equipment included air conditioning , power locks, power mirrors, power windows, folding rear seats, dimming interior mirror,
#389610