70-702: Kellingley Colliery , known affectionately as the 'Big K ', was a deep coal mine in North Yorkshire , England, 3.6 miles (5.8 km) east of Ferrybridge power station . It was owned and operated by UK Coal . The colliery closed on 18 December 2015, marking the end of deep-pit coal mining in Britain. The site is earmarked for commercial development. Exploratory boreholes sunk in the 1950s established that there were up to seven workable seams of coal at Kellingley. The sinking of its two shafts started in 1960. Its sandy and porous geology down to about 600 feet (180 m)
140-600: A European MP in the East Midlands region, stated he hoped the newly developed Deep Soft resource would provide coal extraction for a further ten years. In April 2014 it was announced that the pit would close by July 2015. The colliery's 600 employees had been reduced to 360 by the time of the closure in July 2015. At the time of closure, Thoresby was one of the two last remaining deep-mined coal sources owned by UK Coal, together with Kellingley which closed soon after. In 2015,
210-683: A coal preparation plant . Technical and economic feasibility are evaluated based on the following: regional geological conditions; overburden characteristics; coal seam continuity, thickness, structure, quality, and depth; strength of materials above and below the seam for roof and floor conditions; topography, especially altitude and slope; climate; land ownership as it affects the availability of land for mining and access; surface drainage patterns; groundwater conditions; availability of labor and materials; coal purchaser requirements in terms of tonnage, quality, and destination; and capital investment requirements. Surface mining and deep underground mining are
280-485: A methane explosion underground. On 27 September 2011, Gerry Gibson was killed and another miner injured after an underground roof collapse. As of 31 October 2015, 17 people were listed on the memorial to those who died during the operation of the mine. Kellingley Colliery closed on 18 December 2015, marking the end of deep mining in the United Kingdom. UK Coal had first proposed its extension by three years, alongside
350-697: A 70% increase over the 20 years since 1999. In 2018, the world production of brown coal (lignite) was 803.2 Mt, with Germany the world's largest producer at 166.3 Mt. China is most likely the second largest producer and consumer of lignite globally although specific lignite production data is not made available. Coal production has grown fastest in Asia, while Europe has declined. Since 2011, world coal production has been stable, with decreases in Europe and US offset by increases from China, Indonesia and Australia. The top coal mining nations are: Energy production from coal mining
420-440: A coal mine and its structures are a colliery , a coal mine is called a "pit", and above-ground mining structures are referred to as a " pit head ". In Australia , "colliery" generally refers to an underground coal mine. Coal mining has had many developments in recent years, from the early days of men tunneling, digging, and manually extracting the coal on carts to large open-cut and longwall mines. Mining at this scale requires
490-467: A coal seam occurring near the top of a ridge or hill, the entire top is removed in a series of parallel cuts. Overburden is deposited in nearby valleys and hollows. This method usually leaves the ridge and hilltops as flattened plateaus. The process is highly controversial for the drastic changes in topography, the practice of creating head-of-hollow-fills , or filling in valleys with mining debris, and for covering streams and disrupting ecosystems. Spoil
560-403: A greater proportion of the coal deposit than underground methods, as more of the coal seams in the strata may be exploited. This equipment can include the following: Draglines which operate by removing the overburden, power shovels, large trucks in which transport overburden and coal, bucket wheel excavators, and conveyors. In this mining method, explosives are first used in order to break through
630-472: A higher amount of energy per unit mass, specific energy or massic energy, and can often be obtained in areas where wood is not readily available. Though it was used historically as a domestic fuel, coal is now used mostly in industry, especially in smelting and alloy production, as well as electricity generation . Large-scale coal mining developed during the Industrial Revolution , and coal provided
700-440: A land use condition is not equal to the original use. Existing land uses (such as livestock grazing, crop and timber production) are temporarily eliminated in mining areas. High-value, intensive-land-use areas like urban and transportation systems are not usually affected by mining operations. If mineral values are sufficient, these improvements may be removed to an adjacent area. Strip mining eliminates existing vegetation, destroys
770-440: A large dining-room table, but with hydraulic jacks for legs. After the large pillars of coal have been mined away, the mobile roof support's legs shorten and it is withdrawn to a safe area. The mine roof typically collapses once the mobile roof supports leave an area. There are six principal methods of underground mining: Coal is mined commercially in over 50 countries. 7,921 million metric tons (Mt) of coal were produced in 2019,
SECTION 10
#1733085104803840-447: A method that currently accounts for about 60 percent of world coal production. In deep mining, the room and pillar or bord and pillar method progresses along the seam, while pillars and timber are left standing to support the mine roof. Once room and pillar mines have been developed to a stopping point limited by geology, ventilation, or economics, a supplementary version of room and pillar mining, termed second mining or retreat mining ,
910-551: A new coal mine. Thoresby Colliery Thoresby Colliery was a coal mine in north Nottinghamshire on the outskirts of Edwinstowe village. The mine, which opened in 1925, was the last working colliery in Nottinghamshire when it closed in 2015. The site has been cleared and it being redeveloped as a housing estate. Thoresby colliery opened in 1925. The first two shafts in 1925 were sunk to 690 metres (2,260 ft). The shafts were deepened by 109 metres (358 ft) in
980-574: A result of occupational exposures is coined occupational hearing loss . To protect miners' hearing, the US Mine Safety and Health Administration 's (MSHA) guidelines for noise place a Permissible Exposure Limit (PEL) for noise at 90 dBA time-weighted over 8 hours. A lower cutoff, 85 dBA, is set for a worker to fall into the MSHA Action Level which dictates that workers be placed into hearing conservation programs. Noise exposures vary depending on
1050-539: A similar extension to the life of Thoresby Colliery in Nottinghamshire , which closed in July 2015, but business minister Matthew Hancock argued that the £338 million said to be required for this plan "does not represent value for money". With the closure of Kellingley, the company made 450 miners redundant. Energy minister, Andrea Leadsom , said all miners at Kellingley would receive from UK Coal "the same severance package as miners at Thoresby". The shafts of
1120-485: A surface (also called an open cast) mine. Additionally, coal seam thickness and geology are factors in the selection of a mining method. The most economical method of coal extraction for surface mines is the electric shovel or drag line. The most economical form of underground mining is the long wall, which involves using two spinning drums with carbide bits that runs along sections of the coal seam. Many coals extracted from both surface and underground mines require washing in
1190-575: Is accomplished by drilling holes into the overburden, filling the holes with explosives, and detonating the explosive. The overburden is then removed, using large earth-moving equipment, such as draglines , shovel and trucks, excavator and trucks, or bucket-wheels and conveyors. This overburden is put into the previously mined (and now empty) strip. When all the overburden is removed, the underlying coal seam will be exposed (a 'block' of coal). This block of coal may be drilled and blasted (if hard) or otherwise loaded onto trucks or conveyors for transport to
1260-427: Is commonly started. Miners remove the coal in the pillars, thereby recovering as much coal from the coal seam as possible. A work area involved in pillar extraction is called a pillar section. Modern pillar sections use remote-controlled equipment, including large hydraulic mobile roof-supports, which can prevent cave-ins until the miners and their equipment have left a work area. The mobile roof supports are similar to
1330-418: Is dedicated to mining activities until it can be reshaped and reclaimed. If mining is allowed, resident human populations must be resettled off the mine site; economic activities, such as agriculture or hunting and gathering food and medicinal plants are interrupted. What becomes of the land surface after mining is determined by the manner in which the mining is conducted. Usually reclamation of disturbed lands to
1400-516: Is highly concentrated in certain jurisdictions, which also concentrates much of the social and economic impacts of the industry to these regions. The industry directly employs over seven million workers worldwide, which, in turn, creates millions of indirect jobs. In several parts of the world, producers have reached peak coal as some economies shift away from fossil fuels to address climate change. A 2020 study found that renewables jobs could feasibly be created in these geographies to replace many of
1470-479: Is mostly used to generate electricity, and 75% of annual coal production is exported, mostly to eastern Asia. In 2007, 428 million tonnes of coal was mined in Australia. In 2007, coal provided about 85% of Australia's electricity production. In the fiscal year 2008/09, 487 million tonnes of coal was mined, and 261 million tonnes was exported. In the fiscal year 2013/14, 430.9 million tonnes of coal
SECTION 20
#17330851048031540-417: Is partially economically recoverable. Coal refuse is distinct from the byproducts of burning coal, such as fly ash . Piles of coal refuse can have significant negative environmental consequences, including the leaching of iron, manganese, and aluminum residues into waterways and acid mine drainage . The runoff can create both surface and groundwater contamination. The piles also create a fire hazard, with
1610-593: Is placed at the head of a narrow, steep-sided valley or hollow. In preparation for filling this area, vegetation and soil are removed and a rock drain constructed down the middle of the area to be filled, where a natural drainage course previously existed. When the fill is completed, this underdrain will form a continuous water runoff system from the upper end of the valley to the lower end of the fill. Typical head-of-hollow fills are graded and terraced to create permanently stable slopes. Most coal seams are too deep underground for opencast mining and require underground mining,
1680-436: Is referred to as 'overburden' and is removed in long strips. The overburden from the first strip is deposited in an area outside the planned mining area and referred to as out-of-pit dumping. Overburden from subsequent strips is deposited in the void left from mining the coal and overburden from the previous strip. This is referred to as in-pit dumping. It is often necessary to fragment the overburden by use of explosives. This
1750-515: Is removed and overburden dumped to the side. Dust, vibration, and diesel exhaust odors are created (affecting sight, sound, and smell). Residents of local communities often find such impacts disturbing or unpleasant. In case of mountaintop removal , tops are removed from mountains or hills to expose thick coal seams underneath. The soil and rock removed is deposited in nearby valleys, hollows and depressions, resulting in blocked (and contaminated) waterways. Removal of soil and rock overburden covering
1820-701: Is still common, with 4,000 new cases of black lung every year in the US (4 percent of workers annually) and 10,000 new cases every year in China (0.2 percent of workers). The use of water sprays in mining equipment reduces the risk to miners' lungs. Build-ups of a hazardous gas are known as damps, possibly from the German word Dampf which means steam or vapor: Noise is also a contributing factor to potential adverse effects on coal miners' health. Exposure to excessive noise can lead to noise-induced hearing loss . Hearing loss developed as
1890-435: Is used for both thermal and metallurgical coals . In New South Wales open casting for steam coal and anthracite is practiced. Surface mining accounts for around 80 percent of production in Australia, while in the US it is used for about 67 percent of production. Globally, about 40 percent of coal production involves surface mining. Strip mining exposes coal by removing earth above each coal seam. This earth to be removed
1960-496: The global energy economy . The major coal producing countries, though, such as China , Indonesia, India and Australia , have not reached peak production, with production increases replacing falls in Europe and the United States and proposed mines under development. The coal mining industry employs almost 2.7 million workers. The History of coal mining goes back thousands of years, with early mines documented in ancient China,
2030-400: The 1860s onward. By the late 20th century, coal was, for the most part, replaced in domestic as well as industrial and transportation usage by oil , natural gas or electricity produced from oil, gas, nuclear power or renewable energy sources. By 2010, coal produced over a fourth of the world's energy. Coal extraction methods vary depending on whether the mine is an underground mine or
2100-687: The 1950s. After privatisation of the National Coal Board in the 1990s the mine was taken over by RJB Mining (later UK Coal as UK Coal Thoresby Ltd). Coal seams worked by, or available to, the pit included the Top Hard seam, the Parkgate seam (after closure of Ollerton Colliery in 1994); the Deep Soft seam; and the High Hazels seam (working ceased 1983). In a 2009 underground visit, Roger Helmer , then
2170-589: The 1960s. In March 2004, the pit received £7.2 million from the Coal Investment Aid Scheme. Kellingley’s two main shafts were each almost 870 yards (800 m) deep. One was used to move men and materials, and the second to move coal from the Beeston seam, at a rate of up to 900 tonnes an hour. Kellingley primarily supplied local power stations. It also produced some housecoal-quality coal: larger-sized coals of higher calorific value . The Beeston seam
Kellingley Colliery - Misplaced Pages Continue
2240-573: The Roman Empire and other early historical economies. It became important in the Industrial Revolution of the 19th and 20th centuries, when it was primarily used to power steam engines, heat buildings and generate electricity. Coal mining continues as an important economic activity today, but has begun to decline due to the strong contribution coal plays in global warming and environmental issues, which result in decreasing demand and in some geographies, peak coal . Compared to wood fuels , coal yields
2310-542: The Thoresby Colliery Benevolent Fund, established in 1951, was wound up with £56,000 surplus which was distributed to five different local charities. The site is being reclaimed and redeveloped by Harworth Group , with a ten-year plan into housing and associated infrastructure, named Thoresby Vale, Edwinstowe. Initial plans were to include a country park and with five acres set aside for a primary school . Local MP Mark Spencer mentioned that provision
2380-787: The U.S., Examples include the Sago Mine disaster of 2006, and the 2007 mine accident in Utah 's Crandall Canyon Mine , where nine miners were killed and six entombed. In the decade 2005–2014, US coal mining fatalities averaged 28 per year. The most fatalities during the 2005–2014 decade were 48 in 2010, the year of the Upper Big Branch Mine disaster in West Virginia, which killed 29 miners. Chronic lung diseases, such as pneumoconiosis (black lung) were once common in miners, leading to reduced life expectancy . In some mining countries black lung
2450-608: The US Department of Labor's Mine Safety and Health Administration (MSHA) show that between 1990 and 2004, the industry cut the rate of injuries by more than half and fatalities by two-thirds. But according to the Bureau of Labor Statistics , even in 2006, mining remained the second most dangerous occupation in America, when measured by fatality rate . These numbers, however, include all mining activities, and oil and gas mining contribute to
2520-467: The border of North and West Yorkshire Coal mine Coal mining is the process of extracting coal from the ground or from a mine. Coal is valued for its energy content and since the 1880s has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. In the United Kingdom and South Africa ,
2590-581: The coal mining jobs as part of a just transition ; however, renewable energy was not suitable in some of the geographies with high concentrations of miners, such as in China, which is far and away the leading coal-mining nation. Coal refuse (also described as coal waste, rock, slag, coal tailings, waste material, rock bank, culm, boney, or gob ) is the material left over from coal mining, usually as tailings piles or spoil tips . For every tonne of hard coal generated by mining, 400 kg (880 lb) of waste material remains, which includes some lost coal that
2660-497: The coal preparation (or wash) plant. Once this strip is empty of coal, the process is repeated with a new strip being created next to it. This method is most suitable for areas with flat terrain. Equipment to be used depends on geological conditions. For example, to remove overburden that is loose or unconsolidated, a bucket wheel excavator might be the most productive. The life of some area mines may be more than 50 years. The contour mining method consists of removing overburden from
2730-857: The coal resource may cause burial and loss of topsoil, exposes parent material, and creates large infertile wastelands. Soil disturbance and associated compaction result in conditions conducive to erosion. Soil removal from the area to be surface-mined alters or destroys many natural soil characteristics, and reduces its biodiversity and productivity for agriculture. Soil structure may be disturbed by pulverization or aggregate breakdown. Top 10 hard and brown coal producers in 2012 were (in million metric tons): China 3,621, United States 922, India 629, Australia 432, Indonesia 410, Russia 351, South Africa 261, Germany 196, Poland 144, and Kazakhstan 122. Coal has been mined in every state of Australia, but mainly in Queensland, New South Wales and Victoria. It
2800-538: The colliery were emptied of cables and ropes and then filled with a concrete block about 10 metres deep. Demolition started on the surface buildings and the site was levelled out before ownership is transferred to Harworth Estates for future redevelopment. On Saturday 19 December 2015, thousands of people turned out for a march in Yorkshire to commemorate the end of deep coal mining in the UK and, specifically, Kellingley's last shift
2870-401: The cooling brine was stopped and the frozen ground allowed to thaw. Grout , a thin cement mixture, was pumped at high pressure through holes bored through the shaft's concrete lining into the water-bearing strata. When it set, most of the water leaking into the shafts was stopped and the ground around the upper part of the shafts was stabilised. The pressure needed to pump in the mixture caused
Kellingley Colliery - Misplaced Pages Continue
2940-499: The day before. Starting at Knottingley Town Hall the last miners, their families and many former miners marched to the Social Club. In late-November 2016, a two-part television programme based on the last weeks of the colliery was broadcast with the name The Last Miners . The site is intended for future phased development over a 10-year plan into commercial units to nurture employment opportunities. 2: The Selby Coalfield straddled
3010-429: The developed world. Modern coal mining in the US has an average 23 deaths per year due to mine accidents (2001–2020). However, in lesser developed countries and some developing countries, many miners continue to die annually, either through direct accidents in coal mines or through adverse health consequences from working under poor conditions. China , in particular, has the highest number of coal mining related deaths in
3080-455: The disruptive activities of blasting, ripping, and excavating coal. Stripping of overburden eliminates and destroys archeological and historic features, unless they are removed beforehand. The removal of vegetative cover and activities associated with the construction of haul roads, stockpiling of topsoil, displacement of overburden and hauling of soil and coal increase the quantity of dust around mining operations. Dust degrades air quality in
3150-571: The fatalities occurring in the first half of the 20th century. 3,242 died in 1907, the worst year ever; in 2020 there were five. Open cut hazards are principally mine wall failures and vehicle collisions; underground mining hazards include suffocation, gas poisoning, roof collapse, rock burst , outbursts , and gas explosions. Firedamp explosions can trigger the far more dangerous coal dust explosions, which can engulf an entire mine. Most of these risks are greatly reduced in modern mines, and multiple fatality incidents are now rare in most parts of
3220-457: The genetic soil profile, displaces or destroys wildlife and habitat, alters current land uses, and to some extent permanently changes the general topography of the area mined. Adverse impacts on geological features of human interest may occur in a coal strip mine. Geomorphic and geophysical features and outstanding scenic resources may be sacrificed by indiscriminate mining. Paleontological, cultural, and other historic values may be endangered due to
3290-425: The ground above to heave, causing the winding engine towers mounted above the shafts to tilt slightly. This had been anticipated and provision had been made to jack up the four legs that each tower stood on. The procedure was done regularly during the pumping phase to bring the towers into alignment. To keep the shafts to the correct alignment, plumb lines were used. Four steel lines, evenly spaced, were suspended around
3360-450: The immediate area, has an adverse impact on vegetative life, and constitutes health and safety hazards for mine workers and nearby residents. Surface mining disrupts virtually all aesthetic elements of the landscape. Alteration of land forms often imposes unfamiliar and discontinuous configurations. New linear patterns appear as material is extracted and waste piles are developed. Different colors and textures are exposed as vegetative cover
3430-508: The inside of each shaft, all the way to the bottom. The colliery began production in April 1965. During planning and building the surface infrastructure for the new colliery, employment of 3,000 mineworkers was expected at completion. Because of updated methods and machinery, only about 2,000 men were employed there at any one time. Many of the miners relocated from Scotland to work at the colliery, having lost their jobs at Scottish pits that closed in
3500-552: The main source of primary energy for industry and transportation in industrial areas from the 18th century to the 1950s. Coal remains an important energy source. Coal is also mined today on a large scale by open pit methods wherever the coal strata strike the surface or are relatively shallow. Britain developed the main techniques of underground coal mining from the late 18th century onward, with further progress being driven by 19th-century and early 20th-century progress. However, oil and gas were increasingly used as alternatives from
3570-404: The majority of fatalities. Coal mining resulted in 47 fatalities that year. One study, though, has suggested that hazards of modern mining are now more accretive with workers facing long-term health impacts, such as sleep deprivation, that build up over time. Strip mining severely alters the landscape, which reduces the value of the natural environment in the surrounding land. The land surface
SECTION 50
#17330851048033640-461: The method of extraction. For example, a study has found that among surface coal mine operations, dragline equipment produced the loudest sound at a range of 88–112 dBA. Within longwall sections, stageloaders used to transport coal from the mining face and shearers used for extraction represent some of the highest noise exposures. Auxiliary fans (up to 120 dBA), continuous mining machines (up to 109 dBA), and roof bolters (up to 103 dBA) represent some of
3710-465: The mining workforce. in 2015 US coal mines had 65,971 employees, the lowest figure since EIA began collecting data in 1978. However, a 2016 study reported that a relatively minor investment would allow most coal workers to retrain for the solar energy industry. Coal mining has been a very dangerous activity and the list of historical coal mining disasters is long. In the U.S., 104,895 coal miners were killed in mine accidents since 1900, 90 percent of
3780-411: The nearby Church of St Edmund King and Martyr, Kellington . The church tower was dismantled, and rebuilt after the underpinning was completed. From March to June 2004, workers took sporadic strike action. On 30 September 2008 miner Don Cook died in a rock fall. Miner Ian Cameron died after equipment fell on him on 18 October 2009. On 30 November 2010, 200 workers were evacuated from the pit following
3850-469: The noisiest equipment within continuous mining sections. Exposures to noise exceeding 90 dBA can lead to adverse effects on workers' hearing. The use of administrative controls and engineering controls can be used to reduce noise exposures. Improvements in mining methods (e.g. longwall mining), hazardous gas monitoring (such as safety-lamps or more modern electronic gas monitors), gas drainage, electrical equipment , and ventilation have reduced many of
3920-585: The open pit methods, due to thickness of the seam 20–25 metres (60–90 feet). Coals occurring below 90 m (300 ft) are usually deep mined. However, there are open pit mining operations working on coal seams up to 300–460 metres (1,000–1,500 feet) below ground level, for instance Tagebau Hambach in Germany. When coal seams are near the surface, it may be economical to extract the coal using open-cut , also referred to as open-cast, open-pit, mountaintop removal or strip, mining methods. Opencast coal mining recovers
3990-421: The operation reaches a predetermined stripping ratio (tons of overburden/tons of coal), it is not profitable to continue. Depending on the equipment available, it may not be technically feasible to exceed a certain height of highwall. At this point, it is possible to produce more coal with the augering method in which spiral drills bore tunnels into a highwall laterally from the bench to extract coal without removing
4060-408: The overburden. Mountaintop coal mining is a surface mining practice involving removal of mountaintops to expose coal seams, and disposing of associated mining overburden in adjacent "valley fills." Valley fills occur in steep terrain where there are limited disposal alternatives. Mountaintop removal mining combines area and contour strip mining methods. In areas with rolling or steep terrain with
4130-425: The potential to spontaneously ignite. Because most coal refuse harbors toxic components, it is not easily reclaimed by replanting with plants like beach grasses. The use of sophisticated sensing equipment to monitor air quality is common and has replaced the use of small animals such as canaries, often referred to as " miner's canaries ". In the United States, the increase in technology has significantly decreased
4200-399: The risks of rock falls, explosions, and unhealthy air quality. Gases released during the mining process can be recovered to generate electricity and improve worker safety with gas engines . Another innovation in recent years is the use of closed circuit escape respirators , respirators that contain oxygen for situations where mine ventilation is compromised. Statistical analyses performed by
4270-565: The seam in a pattern following the contours along a ridge or around the hillside. This method is most commonly used in areas with rolling to steep terrain. It was once common to deposit the spoil on the downslope side of the bench thus created, but this method of spoil disposal consumed much additional land and created severe landslide and erosion problems. To alleviate these problems, a variety of methods were devised to use freshly cut overburden to refill mined-out areas. These haul-back or lateral movement methods generally consist of an initial cut with
SECTION 60
#17330851048034340-432: The spoil deposited downslope or at some other site and spoil from the second cut refilling the first. A ridge of undisturbed natural material 15 to 20 ft (5 to 6 m) wide is often intentionally left at the outer edge of the mined area. This barrier adds stability to the reclaimed slope by preventing spoil from slumping or sliding downhill. The limitations of contour strip mining are both economic and technical. When
4410-476: The surface or overburden, of the mining area. The overburden is then removed by draglines or by shovel and truck. Once the coal seam is exposed, it is drilled, fractured and thoroughly mined in strips. The coal is then loaded onto large trucks or conveyors for transport to either the coal preparation plant or directly to where it will be used. Most open cast mines in the United States extract bituminous coal . In Canada, Australia, and South Africa, open cast mining
4480-524: The two basic methods of mining. The choice of mining method depends primarily on depth, density, overburden, and thickness of the coal seam; seams relatively close to the surface, at depths less than approximately 55 m (180 ft), are usually surface mined. Coal that occurs at depths of 55 to 90 m (180 to 300 ft) are usually deep mined, but in some cases surface mining techniques can be used. For example, some western U.S. coal that occur at depths in excess of 60 m (200 ft) are mined by
4550-452: The use of draglines , trucks, conveyors , hydraulic jacks , and shearers. The coal mining industry has a long history of significant negative environmental impacts on local ecosystems, health impacts on local communities and workers, and contributes heavily to the global environmental crises, such as poor air quality and climate change . For these reasons, coal has been one of the first fossil fuels to be phased out of various parts of
4620-441: The world, with official statistics claiming that 6,027 deaths occurred in 2004. To compare, 28 deaths were reported in the U.S. in the same year. Coal production in China is twice that in the US, while the number of coal miners is around 50 times that of the US, making deaths in coal mines in China 4 times as common per worker (108 times as common per unit output) as in the US. Mine disasters have still occurred in recent years in
4690-545: Was accessed after a £55 million investment programme undertaken by UK Coal. It was expected to extend the life of the colliery until at least 2015. Coal reserves accessible in the Silkstone seam were anticipated to extend its life to 2019. Miners took part in the 1984 miners' strike , although there was a higher number opposed to the strike at Kellingley than in most other pits in Yorkshire . A miner from Kellingley, Joe Green,
4760-400: Was killed after being hit by a lorry on 15 June 1984. A sit-in was held by 200 striking men on 26 September 1984. From January 1985 onwards, some miners returned to work , with the first coal since the strike began produced on 8 January 1985, and the strike formally ended on 3 March 1985. In 1990 and 1991, the proposed extension to the colliery necessitated the excavation and underpinning of
4830-531: Was mined, and 375.1 million tonnes was exported. In 2013/14, coal provided about 69% of Australia's electricity production. In 2013, Australia was the world's fifth-largest coal producer, after China, the United States, India, and Indonesia. However, in terms of proportion of production exported, Australia is the world's second largest coal exporter, as it exports roughly 73% of its coal production. Indonesia exports about 87% of its coal production. A court in Australia has cited climate change in ruling against
4900-403: Was waterlogged. Boreholes drilled around each shaft position had sub-zero-temperature brine pumped through them to freeze the ground down to about 640 feet (200 m). The sinking personnel had to work in sub-zero temperatures until the shafts were below this frozen ground. The shafts were eventually sunk to a depth of around 870 yards (800 m). After a concrete lining sealed the shafts,
#802197