KHVH (830 kHz ) is a commercial AM radio station in Honolulu , Hawaii . It broadcasts a news/talk format and is owned by iHeartMedia, Inc. Its studios and offices are on Iwilei Road in the Kalihi neighborhood of Honolulu.
77-981: KHVH is powered at 10,000 watts , using a non-directional antenna . The transmitter is atop Kalia Tower, at the Hilton Hawaiian Village off Dillingham Boulevard near the Kapalama Canal. It also transmits on Oceanic Spectrum digital channel 881 for the entire state of Hawaii . Weekdays begin with a talk and information show hosted by Rick Hamada . The rest of the weekday schedule is nationally syndicated conservative talk programs: The Sean Hannity Show , The Glenn Beck Program , The Clay Travis and Buck Sexton Show , The Jesse Kelly Show , The Joe Pags Show and Coast to Coast AM with George Noory . Due to time zone differences, Hannity, Kelly, Pags, Travis and Sexton's shows are all recorded and delayed for broadcast at Hawaiian time . The 6 p.m. newscast from KHON-TV 2, Honolulu's Fox Network affiliate ,
154-546: A light bulb with a power rating of 100 W is turned on for one hour, the energy used is 100 watt hours (W·h), 0.1 kilowatt hour, or 360 kJ . This same amount of energy would light a 40-watt bulb for 2.5 hours, or a 50-watt bulb for 2 hours. Power stations are rated using units of power, typically megawatts or gigawatts (for example, the Three Gorges Dam in China is rated at approximately 22 gigawatts). This reflects
231-493: A kilogram is a milligram , not a microkilogram . The BIPM specifies 24 prefixes for the International System of Units (SI): The base units and the derived units formed as the product of powers of the base units with a numerical factor of one form a coherent system of units . Every physical quantity has exactly one coherent SI unit. For example, 1 m/s = 1 m / (1 s) is the coherent derived unit for velocity. With
308-408: A list of non-SI units accepted for use with SI , including the hour, minute, degree of angle, litre, and decibel. Although the term metric system is often used as an informal alternative name for the International System of Units, other metric systems exist, some of which were in widespread use in the past or are even still used in particular areas. There are also individual metric units such as
385-449: A period of one year: equivalent to approximately 114 megawatts of constant power output. The watt-second is a unit of energy, equal to the joule . One kilowatt hour is 3,600,000 watt seconds. While a watt per hour is a unit of rate of change of power with time, it is not correct to refer to a watt (or watt-hour) as a watt per hour. International System of Units The International System of Units , internationally known by
462-410: A positive or negative power. It can also be combined with other unit symbols to form compound unit symbols. For example, g/cm is an SI unit of density , where cm is to be interpreted as ( cm ) . Prefixes are added to unit names to produce multiples and submultiples of the original unit. All of these are integer powers of ten, and above a hundred or below a hundredth all are integer powers of
539-569: A specification for units of measurement. The International Bureau of Weights and Measures (BIPM) has described SI as "the modern form of metric system". In 1971 the mole became the seventh base unit of the SI. After the metre was redefined in 1960, the International Prototype of the Kilogram (IPK) was the only physical artefact upon which base units (directly the kilogram and indirectly
616-411: A thousand. For example, kilo- denotes a multiple of a thousand and milli- denotes a multiple of a thousandth, so there are one thousand millimetres to the metre and one thousand metres to the kilometre. The prefixes are never combined, so for example a millionth of a metre is a micrometre , not a millimillimetre . Multiples of the kilogram are named as if the gram were the base unit, so a millionth of
693-535: A turbine, which generates 648 MW e (i.e. electricity). Other SI prefixes are sometimes used, for example gigawatt electrical (GW e ). The International Bureau of Weights and Measures , which maintains the SI-standard, states that further information about a quantity should not be attached to the unit symbol but instead to the quantity symbol (e.g., P th = 270 W rather than P = 270 W th ) and so these unit symbols are non-SI. In compliance with SI,
770-486: A unit of time, namely 1 J/s. In this new definition, 1 absolute watt = 1.00019 international watts. Texts written before 1948 are likely to be using the international watt, which implies caution when comparing numerical values from this period with the post-1948 watt. In 1960, the 11th General Conference on Weights and Measures adopted the absolute watt into the International System of Units (SI) as
847-594: A version of the CGPM document (NIST SP 330) which clarifies usage for English-language publications that use American English . The concept of a system of units emerged a hundred years before the SI. In the 1860s, James Clerk Maxwell , William Thomson (later Lord Kelvin), and others working under the auspices of the British Association for the Advancement of Science , building on previous work of Carl Gauss , developed
SECTION 10
#1732983932255924-421: A wide range. For example, driving distances are normally given in kilometres (symbol km ) rather than in metres. Here the metric prefix ' kilo- ' (symbol 'k') stands for a factor of 1000; thus, 1 km = 1000 m . The SI provides twenty-four metric prefixes that signify decimal powers ranging from 10 to 10 , the most recent being adopted in 2022. Most prefixes correspond to integer powers of 1000;
1001-531: Is a decimal and metric system of units established in 1960 and periodically updated since then. The SI has an official status in most countries, including the United States , Canada , and the United Kingdom , although these three countries are among the handful of nations that, to various degrees, also continue to use their customary systems. Nevertheless, with this nearly universal level of acceptance,
1078-563: Is also carried on weeknights. Weekends feature specialty shows on money, health, golf, real estate, home improvement and technology, some of which are paid brokered programming . Syndicated weekend programs include The Kim Komando Show , The Weekend with Michael Brown and The Mark Moss Show as well as repeats of weekday programs. KHVH is an affiliate of the Las Vegas Raiders Radio Network . Most hours begin with an update from Fox News Radio . The station signed on
1155-458: Is important not to use the unit alone to specify the quantity. As the SI Brochure states, "this applies not only to technical texts, but also, for example, to measuring instruments (i.e. the instrument read-out needs to indicate both the unit and the quantity measured)". Furthermore, the same coherent SI unit may be a base unit in one context, but a coherent derived unit in another. For example,
1232-585: Is named after the Scottish inventor James Watt . The unit name was proposed by C. William Siemens in August 1882 in his President's Address to the Fifty-Second Congress of the British Association for the Advancement of Science . Noting that units in the practical system of units were named after leading physicists, Siemens proposed that watt might be an appropriate name for a unit of power. Siemens defined
1309-545: Is not coherent. The principle of coherence was successfully used to define a number of units of measure based on the CGS, including the erg for energy , the dyne for force , the barye for pressure , the poise for dynamic viscosity and the stokes for kinematic viscosity . A French-inspired initiative for international cooperation in metrology led to the signing in 1875 of the Metre Convention , also called Treaty of
1386-410: Is not fundamental or even unique – it is a matter of convention. The system allows for an unlimited number of additional units, called derived units , which can always be represented as products of powers of the base units, possibly with a nontrivial numeric multiplier. When that multiplier is one, the unit is called a coherent derived unit. For example, the coherent derived SI unit of velocity
1463-520: Is not the only way in which a base unit can be determined: the SI Brochure states that "any method consistent with the laws of physics could be used to realise any SI unit". Various consultative committees of the CIPM decided in 2016 that more than one mise en pratique would be developed for determining the value of each unit. These methods include the following: The International System of Units, or SI,
1540-468: Is otherwise identical to the SI Brochure. For example, since 1979, the litre may exceptionally be written using either an uppercase "L" or a lowercase "l", a decision prompted by the similarity of the lowercase letter "l" to the numeral "1", especially with certain typefaces or English-style handwriting. The American NIST recommends that within the United States "L" be used rather than "l". Metrologists carefully distinguish between
1617-790: Is the Hilton Hawaiian Village Hotel . KHVH 990 had its studios at the hotel. The KHVH transmitting tower still stands atop the Hilton's Kalia Tower. In 1986 KIKI 830 flipped to oldies while the Top 40 hit radio format moved to its FM sister station, the former KMAI-FM . It became KIKI-FM, known as "I94" (now co-owned "93.9 The Beat"). From 1986 through 1990, each year KIKI added an additional year to its repertoire; e.g., if it were playing songs from artists up until 1960, beginning January 1, it would then add songs from 1961, maintaining its oldies format. In 1993, KIKI and KHVH swapped signals when
SECTION 20
#17329839322551694-427: Is the metre per second , with the symbol m/s . The base and coherent derived units of the SI together form a coherent system of units ( the set of coherent SI units ). A useful property of a coherent system is that when the numerical values of physical quantities are expressed in terms of the units of the system, then the equations between the numerical values have exactly the same form, including numerical factors, as
1771-424: Is the inverse of electrical resistance , with the consequence that the siemens is the inverse of the ohm, and similarly, the ohm and siemens can be replaced with a ratio of an ampere and a volt, because those quantities bear a defined relationship to each other. Other useful derived quantities can be specified in terms of the SI base and derived units that have no named units in the SI, such as acceleration, which has
1848-523: Is the rate at which electrical work is performed when a current of one ampere (A) flows across an electrical potential difference of one volt (V), meaning the watt is equivalent to the volt-ampere (the latter unit, however, is used for a different quantity from the real power of an electrical circuit). 1 W = 1 V ⋅ A . {\displaystyle \mathrm {1~W=1~V{\cdot }A} .} Two additional unit conversions for watt can be found using
1925-467: Is the unit of power or radiant flux in the International System of Units (SI), equal to 1 joule per second or 1 kg⋅m ⋅s . It is used to quantify the rate of energy transfer . The watt is named in honor of James Watt (1736–1819), an 18th-century Scottish inventor , mechanical engineer , and chemist who improved the Newcomen engine with his own steam engine in 1776. Watt's invention
2002-529: The ISO/IEC 80000 series of standards, which define the International System of Quantities (ISQ), specifies base and derived quantities that necessarily have the corresponding SI units. Many non-SI units continue to be used in the scientific, technical, and commercial literature. Some units are deeply embedded in history and culture, and their use has not been entirely replaced by their SI alternatives. The CIPM recognised and acknowledged such traditions by compiling
2079-399: The centimetre–gram–second system of units or cgs system in 1874. The systems formalised the concept of a collection of related units called a coherent system of units. In a coherent system, base units combine to define derived units without extra factors. For example, using meters per second is coherent in a system that uses meter for length and seconds for time, but kilometre per hour
2156-658: The speed of light in vacuum c , the hyperfine transition frequency of caesium Δ ν Cs , the Planck constant h , the elementary charge e , the Boltzmann constant k , the Avogadro constant N A , and the luminous efficacy K cd . The nature of the defining constants ranges from fundamental constants of nature such as c to the purely technical constant K cd . The values assigned to these constants were fixed to ensure continuity with previous definitions of
2233-419: The sverdrup and the darcy that exist outside of any system of units. Most of the units of the other metric systems are not recognised by the SI. Sometimes, SI unit name variations are introduced, mixing information about the corresponding physical quantity or the conditions of its measurement; however, this practice is unacceptable with the SI. "Unacceptability of mixing information with units: When one gives
2310-496: The BIPM publishes a mises en pratique , ( French for 'putting into practice; implementation', ) describing the current best practical realisations of the unit. The separation of the defining constants from the definitions of units means that improved measurements can be developed leading to changes in the mises en pratique as science and technology develop, without having to revise the definitions. The published mise en pratique
2387-475: The IPK. During extraordinary verifications carried out in 2014 preparatory to redefinition of metric standards, continuing divergence was not confirmed. Nonetheless, the residual and irreducible instability of a physical IPK undermined the reliability of the entire metric system to precision measurement from small (atomic) to large (astrophysical) scales. By avoiding the use of an artefact to define units, all issues with
KHVH - Misplaced Pages Continue
2464-583: The International Committee for Weights and Measures (CIPM ), and the International Bureau of Weights and Measures (BIPM ). All the decisions and recommendations concerning units are collected in a brochure called The International System of Units (SI) , which is published in French and English by the BIPM and periodically updated. The writing and maintenance of the brochure is carried out by one of
2541-475: The Metre Convention". This working document was Practical system of units of measurement . Based on this study, the 10th CGPM in 1954 defined an international system derived six base units: the metre, kilogram, second, ampere, degree Kelvin, and candela. The 9th CGPM also approved the first formal recommendation for the writing of symbols in the metric system when the basis of the rules as they are now known
2618-471: The Metre, by 17 nations. The General Conference on Weights and Measures (French: Conférence générale des poids et mesures – CGPM), which was established by the Metre Convention, brought together many international organisations to establish the definitions and standards of a new system and to standardise the rules for writing and presenting measurements. Initially the convention only covered standards for
2695-402: The SI "has been used around the world as the preferred system of units, the basic language for science, technology, industry, and trade." The only other types of measurement system that still have widespread use across the world are the imperial and US customary measurement systems . The international yard and pound are defined in terms of the SI. The quantities and equations that provide
2772-509: The SI Brochure notes that the name of the unit with the symbol °C is correctly spelled as 'degree Celsius ': the first letter of the name of the unit, 'd', is in lowercase, while the modifier 'Celsius' is capitalised because it is a proper name. The English spelling and even names for certain SI units and metric prefixes depend on the variety of English used. US English uses the spelling deka- , meter , and liter , and International English uses deca- , metre , and litre . The name of
2849-455: The SI unit m/s . A combination of base and derived units may be used to express a derived unit. For example, the SI unit of force is the newton (N), the SI unit of pressure is the pascal (Pa) – and the pascal can be defined as one newton per square metre (N/m ). Like all metric systems, the SI uses metric prefixes to systematically construct, for the same physical quantity, a set of units that are decimal multiples of each other over
2926-490: The SI units. The ISQ is formalised, in part, in the international standard ISO/IEC 80000 , which was completed in 2009 with the publication of ISO 80000-1 , and has largely been revised in 2019–2020. The SI is regulated and continually developed by three international organisations that were established in 1875 under the terms of the Metre Convention . They are the General Conference on Weights and Measures (CGPM ),
3003-403: The abbreviation SI (from French Système international d'unités ), is the modern form of the metric system and the world's most widely used system of measurement . Coordinated by the International Bureau of Weights and Measures (abbreviated BIPM from French : Bureau international des poids et mesures ) it is the only system of measurement with official status in nearly every country in
3080-467: The above equation and Ohm's law . 1 W = 1 V 2 / Ω = 1 A 2 ⋅ Ω , {\displaystyle \mathrm {1~W=1~V^{2}/\Omega =1~A^{2}{\cdot }\Omega } ,} where ohm ( Ω {\displaystyle \Omega } ) is the SI derived unit of electrical resistance . The watt
3157-665: The air in April ;1951 ; 73 years ago ( 1951-04 ) , before Hawaii was a state. Its original call sign was KIKI and it was powered at only 250 watts. Its studios were at 320 Ward Avenue. In the 1960s and 70s, KIKI had a Top 40 format and was an affiliate of the ABC Contemporary Network . The original KHVH 990 signed on the air in 1957. The call letters KHVH stand for Kaiser Hawaiian Village Hotel in Waikiki , originally owned by Henry J. Kaiser . Today it
KHVH - Misplaced Pages Continue
3234-511: The ampere is a base unit when it is a unit of electric current, but a coherent derived unit when it is a unit of magnetomotive force. According to the SI Brochure, unit names should be treated as common nouns of the context language. This means that they should be typeset in the same character set as other common nouns (e.g. Latin alphabet in English, Cyrillic script in Russian, etc.), following
3311-428: The ampere, mole and candela) depended for their definition, making these units subject to periodic comparisons of national standard kilograms with the IPK. During the 2nd and 3rd Periodic Verification of National Prototypes of the Kilogram, a significant divergence had occurred between the mass of the IPK and all of its official copies stored around the world: the copies had all noticeably increased in mass with respect to
3388-515: The base units. The SI selects seven units to serve as base units , corresponding to seven base physical quantities. They are the second , with the symbol s , which is the SI unit of the physical quantity of time ; the metre , symbol m , the SI unit of length ; kilogram ( kg , the unit of mass ); ampere ( A , electric current ); kelvin ( K , thermodynamic temperature ); mole ( mol , amount of substance ); and candela ( cd , luminous intensity ). The base units are defined in terms of
3465-445: The base units. After the redefinition, the SI is defined by fixing the numerical values of seven defining constants. This has the effect that the distinction between the base units and derived units is, in principle, not needed, since all units, base as well as derived, may be constructed directly from the defining constants. Nevertheless, the distinction is retained because "it is useful and historically well established", and also because
3542-416: The base units. Twenty-two coherent derived units have been provided with special names and symbols. The seven base units and the 22 coherent derived units with special names and symbols may be used in combination to express other coherent derived units. Since the sizes of coherent units will be convenient for only some applications and not for others, the SI provides twenty-four prefixes which, when added to
3619-401: The coherent set and the multiples and sub-multiples of coherent units formed by using the SI prefixes. The kilogram is the only coherent SI unit whose name and symbol include a prefix. For historical reasons, the names and symbols for multiples and sub-multiples of the unit of mass are formed as if the gram were the base unit. Prefix names and symbols are attached to the unit name gram and
3696-463: The committees of the CIPM. The definitions of the terms "quantity", "unit", "dimension", etc. that are used in the SI Brochure are those given in the international vocabulary of metrology . The brochure leaves some scope for local variations, particularly regarding unit names and terms in different languages. For example, the United States' National Institute of Standards and Technology (NIST) has produced
3773-476: The context in which the SI units are defined are now referred to as the International System of Quantities (ISQ). The ISQ is based on the quantities underlying each of the seven base units of the SI . Other quantities, such as area , pressure , and electrical resistance , are derived from these base quantities by clear, non-contradictory equations. The ISQ defines the quantities that are measured with
3850-595: The corresponding equations between the physical quantities. Twenty-two coherent derived units have been provided with special names and symbols as shown in the table below. The radian and steradian have no base units but are treated as derived units for historical reasons. The derived units in the SI are formed by powers, products, or quotients of the base units and are unlimited in number. Derived units apply to some derived quantities , which may by definition be expressed in terms of base quantities , and thus are not independent; for example, electrical conductance
3927-497: The defining constants. For example, the kilogram is defined by taking the Planck constant h to be 6.626 070 15 × 10 J⋅s , giving the expression in terms of the defining constants All units in the SI can be expressed in terms of the base units, and the base units serve as a preferred set for expressing or analysing the relationships between units. The choice of which and even how many quantities to use as base quantities
SECTION 50
#17329839322554004-410: The definition of a unit and its realisation. The SI units are defined by declaring that seven defining constants have certain exact numerical values when expressed in terms of their SI units. The realisation of the definition of a unit is the procedure by which the definition may be used to establish the value and associated uncertainty of a quantity of the same kind as the unit. For each base unit
4081-403: The definitions. A consequence is that as science and technologies develop, new and superior realisations may be introduced without the need to redefine the unit. One problem with artefacts is that they can be lost, damaged, or changed; another is that they introduce uncertainties that cannot be reduced by advancements in science and technology. The original motivation for the development of the SI
4158-517: The development of the CGS system. The International System of Units consists of a set of defining constants with corresponding base units, derived units, and a set of decimal-based multipliers that are used as prefixes. The seven defining constants are the most fundamental feature of the definition of the system of units. The magnitudes of all SI units are defined by declaring that seven constants have certain exact numerical values when expressed in terms of their SI units. These defining constants are
4235-534: The electrical units in terms of length, mass, and time using dimensional analysis was beset with difficulties – the dimensions depended on whether one used the ESU or EMU systems. This anomaly was resolved in 1901 when Giovanni Giorgi published a paper in which he advocated using a fourth base unit alongside the existing three base units. The fourth unit could be chosen to be electric current , voltage , or electrical resistance . Electric current with named unit 'ampere'
4312-515: The energy company Ørsted A/S uses the unit megawatt for produced electrical power and the equivalent unit megajoule per second for delivered heating power in a combined heat and power station such as Avedøre Power Station . When describing alternating current (AC) electricity, another distinction is made between the watt and the volt-ampere . While these units are equivalent for simple resistive circuits , they differ when loads exhibit electrical reactance . Radio stations usually report
4389-439: The exception of the kilogram (for which the prefix kilo- is required for a coherent unit), when prefixes are used with the coherent SI units, the resulting units are no longer coherent, because the prefix introduces a numerical factor other than one. For example, the metre, kilometre, centimetre, nanometre, etc. are all SI units of length, though only the metre is a coherent SI unit. The complete set of SI units consists of both
4466-492: The loss, damage, and change of the artefact are avoided. A proposal was made that: The new definitions were adopted at the 26th CGPM on 16 November 2018, and came into effect on 20 May 2019. The change was adopted by the European Union through Directive (EU) 2019/1258. Prior to its redefinition in 2019, the SI was defined through the seven base units from which the derived units were constructed as products of powers of
4543-460: The maximum power output it can achieve at any point in time. A power station's annual energy output, however, would be recorded using units of energy (not power), typically gigawatt hours. Major energy production or consumption is often expressed as terawatt hours for a given period; often a calendar year or financial year. One terawatt hour of energy is equal to a sustained power delivery of one terawatt for one hour, or approximately 114 megawatts for
4620-574: The metre and the kilogram. This became the foundation of the MKS system of units. At the close of the 19th century three different systems of units of measure existed for electrical measurements: a CGS-based system for electrostatic units , also known as the Gaussian or ESU system, a CGS-based system for electromechanical units (EMU), and an International system based on units defined by the Metre Convention for electrical distribution systems. Attempts to resolve
4697-431: The name and symbol of a coherent unit produce twenty-four additional (non-coherent) SI units for the same quantity; these non-coherent units are always decimal (i.e. power-of-ten) multiples and sub-multiples of the coherent unit. The current way of defining the SI is a result of a decades-long move towards increasingly abstract and idealised formulation in which the realisations of the units are separated conceptually from
SECTION 60
#17329839322554774-453: The only ones that do not are those for 10, 1/10, 100, and 1/100. The conversion between different SI units for one and the same physical quantity is always through a power of ten. This is why the SI (and metric systems more generally) are called decimal systems of measurement units . The grouping formed by a prefix symbol attached to a unit symbol (e.g. ' km ', ' cm ') constitutes a new inseparable unit symbol. This new symbol can be raised to
4851-721: The outlets became sister stations , owned by Clear Channel Communications based in San Antonio . The oldies format and KIKI call letters moved to 990 AM, while the talk format and KHVH call sign moved to 830 AM. The station once broadcast in AM stereo using the C-QUAM system. In 2014, Clear Channel switched its corporate name to iHeartMedia, Inc. [REDACTED] Pre-1993 KIKI "83 AM Stereo" logo. 21°19′26″N 157°52′32″W / 21.32389°N 157.87556°W / 21.32389; -157.87556 Watt The watt (symbol: W )
4928-488: The power of their transmitters in units of watts, referring to the effective radiated power . This refers to the power that a half-wave dipole antenna would need to radiate to match the intensity of the transmitter's main lobe . The terms power and energy are closely related but distinct physical quantities. Power is the rate at which energy is generated or consumed and hence is measured in units (e.g. watts) that represent energy per unit time . For example, when
5005-478: The quantity symbols, formatting of numbers and the decimal marker, expressing measurement uncertainty, multiplication and division of quantity symbols, and the use of pure numbers and various angles. In the United States, the guideline produced by the National Institute of Standards and Technology (NIST) clarifies language-specific details for American English that were left unclear by the SI Brochure, but
5082-559: The unit of power. In the electric power industry , megawatt electrical ( MWe or MW e ) refers by convention to the electric power produced by a generator, while megawatt thermal or thermal megawatt (MWt, MW t , or MWth, MW th ) refers to thermal power produced by the plant. For example, the Embalse nuclear power plant in Argentina uses a fission reactor to generate 2,109 MW t (i.e. heat), which creates steam to drive
5159-465: The unit symbol g respectively. For example, 10 kg is written milligram and mg , not microkilogram and μkg . Several different quantities may share the same coherent SI unit. For example, the joule per kelvin (symbol J/K ) is the coherent SI unit for two distinct quantities: heat capacity and entropy ; another example is the ampere, which is the coherent SI unit for both electric current and magnetomotive force . This illustrates why it
5236-545: The unit whose symbol is t and which is defined according to 1 t = 10 kg is 'metric ton' in US English and 'tonne' in International English. Symbols of SI units are intended to be unique and universal, independent of the context language. The SI Brochure has specific rules for writing them. In addition, the SI Brochure provides style conventions for among other aspects of displaying quantities units:
5313-556: The unit within the existing system of practical units as "the power conveyed by a current of an Ampère through the difference of potential of a Volt". In October 1908, at the International Conference on Electric Units and Standards in London, so-called international definitions were established for practical electrical units. Siemens' definition was adopted as the international watt. (Also used: 1 A × 1 Ω.) The watt
5390-435: The usual grammatical and orthographical rules of the context language. For example, in English and French, even when the unit is named after a person and its symbol begins with a capital letter, the unit name in running text should start with a lowercase letter (e.g., newton, hertz, pascal) and is capitalised only at the beginning of a sentence and in headings and publication titles . As a nontrivial application of this rule,
5467-626: The world, employed in science, technology, industry, and everyday commerce. The SI comprises a coherent system of units of measurement starting with seven base units , which are the second (symbol s, the unit of time ), metre (m, length ), kilogram (kg, mass ), ampere (A, electric current ), kelvin (K, thermodynamic temperature ), mole (mol, amount of substance ), and candela (cd, luminous intensity ). The system can accommodate coherent units for an unlimited number of additional quantities. These are called coherent derived units , which can always be represented as products of powers of
5544-465: Was chosen as the base unit, and the other electrical quantities derived from it according to the laws of physics. When combined with the MKS the new system, known as MKSA, was approved in 1946. In 1948, the 9th CGPM commissioned a study to assess the measurement needs of the scientific, technical, and educational communities and "to make recommendations for a single practical system of units of measurement, suitable for adoption by all countries adhering to
5621-420: Was defined as equal to 10 units of power in the practical system of units. The "international units" were dominant from 1909 until 1948. After the 9th General Conference on Weights and Measures in 1948, the international watt was redefined from practical units to absolute units (i.e., using only length, mass, and time). Concretely, this meant that 1 watt was defined as the quantity of energy transferred in
5698-402: Was established by the Metre Convention of 1875, brought together many international organisations to establish the definitions and standards of a new system and to standardise the rules for writing and presenting measurements. The system was published in 1960 as a result of an initiative that began in 1948, and is based on the metre–kilogram–second system of units (MKS) combined with ideas from
5775-685: Was fundamental for the Industrial Revolution . When an object's velocity is held constant at one meter per second against a constant opposing force of one newton , the rate at which work is done is one watt. 1 W = 1 J / s = 1 N ⋅ m / s = 1 k g ⋅ m 2 ⋅ s − 3 . {\displaystyle \mathrm {1~W=1~J{/}s=1~N{\cdot }m{/}s=1~kg{\cdot }m^{2}{\cdot }s^{-3}} .} In terms of electromagnetism , one watt
5852-464: Was laid down. These rules were subsequently extended and now cover unit symbols and names, prefix symbols and names, how quantity symbols should be written and used, and how the values of quantities should be expressed. The 10th CGPM in 1954 resolved to create an international system of units and in 1960, the 11th CGPM adopted the International System of Units , abbreviated SI from the French name Le Système international d'unités , which included
5929-399: Was the diversity of units that had sprung up within the centimetre–gram–second (CGS) systems (specifically the inconsistency between the systems of electrostatic units and electromagnetic units ) and the lack of coordination between the various disciplines that used them. The General Conference on Weights and Measures (French: Conférence générale des poids et mesures – CGPM), which
#254745