Misplaced Pages

#509490

106-470: Modern homesteaders often use renewable energy options including solar and wind power . Many also choose to plant and grow heirloom vegetables and to raise heritage livestock. Homesteading is not defined by where someone lives, such as the city or the country, but by the lifestyle choices they make. Historically, homesteading has been used by governmental entities (engaged in national expansion) to help settle what were termed unsettled areas, especially in

212-401: A human timescale . The most widely used renewable energy types are solar energy , wind power , and hydropower . Bioenergy and geothermal power are also significant in some countries. Some also consider nuclear power a renewable power source , although this is controversial. Renewable energy installations can be large or small and are suited for both urban and rural areas. Renewable energy

318-408: A line shaft . Dogs were sometimes used on machines such as a treadmill, which could be adapted to churn butter. In the late 19th century specially designed power buildings leased space to small shops. These building supplied power to the tenants from a steam engine through line shafts. Electric motors were several times more efficient than small steam engines because central station generation

424-463: A faster rate than they are consumed". Solar power , wind power , hydroelectricity , geothermal energy, and biomass are widely agreed to be the main types of renewable energy. Renewable energy often displaces conventional fuels in four areas: electricity generation , hot water / space heating , transportation , and rural (off-grid) energy services. Although almost all forms of renewable energy cause much fewer carbon emissions than fossil fuels,

530-437: A given time. Solar energy can only be captured during the day, and ideally in cloudless conditions. Wind power generation can vary significantly not only day-to-day, but even month-to-month. This poses a challenge when transitioning away from fossil fuels: energy demand will often be higher or lower than what renewables can provide. Both scenarios can cause electricity grids to become overloaded, leading to power outages . In

636-948: A large portion of the total, such as Kenya (43%) and Indonesia (5%). Technical advances may eventually make geothermal power more widely available. For example, enhanced geothermal systems involve drilling around 10 kilometres (6.2 mi) into the Earth, breaking apart hot rocks and extracting the heat using water. In theory, this type of geothermal energy extraction could be done anywhere on Earth. There are also other renewable energy technologies that are still under development, including enhanced geothermal systems , concentrated solar power , cellulosic ethanol , and marine energy . These technologies are not yet widely demonstrated or have limited commercialization. Some may have potential comparable to other renewable energy technologies, but still depend on further breakthroughs from research, development and engineering. Enhanced geothermal systems (EGS) are

742-424: A light arc with carbon electrodes. However, it was not used to any great extent until a practical means of generating electricity was developed. Carbon arc lamps were started by making contact between two carbon electrodes, which were then separated to within a narrow gap. Because the carbon burned away, the gap had to be constantly readjusted. Several mechanisms were developed to regulate the arc. A common approach

848-407: A moment's notice, require no expense of time for its management and be of modest cost both in original cost and in daily expense. To be efficient steam engines needed to be several hundred horsepower. Steam engines and boilers also required operators and maintenance. For these reasons the smallest commercial steam engines were about 2 horsepower. This was above the need for many small shops. Also,

954-638: A more energy-dense biofuel like ethanol. Wood is the most significant biomass energy source as of 2012 and is usually sourced from a trees cleared for silvicultural reasons or fire prevention . Municipal wood waste – for instance, construction materials or sawdust – is also often burned for energy. The biggest per-capita producers of wood-based bioenergy are heavily forested countries like Finland, Sweden, Estonia, Austria, and Denmark. Bioenergy can be environmentally destructive if old-growth forests are cleared to make way for crop production. In particular, demand for palm oil to produce biodiesel has contributed to

1060-506: A new type of geothermal power which does not require natural hot water reservoirs or steam to generate power. Most of the underground heat within drilling reach is trapped in solid rocks, not in water. EGS technologies use hydraulic fracturing to break apart these rocks and release the heat they contain, which is then harvested by pumping water into the ground. The process is sometimes known as "hot dry rock" (HDR). Unlike conventional geothermal energy extraction, EGS may be feasible anywhere in

1166-585: A parliamentary committee recommended passage of the landmark 1882 Electric Lighting Act, which allowed the licensing of persons, companies or local authorities to supply electricity for any public or private purposes. The first large scale central power station in America was Edison's Pearl Street Station in New York, which began operating in September 1882. The station had six 200 horsepower Edison dynamos, each powered by

SECTION 10

#1733086199510

1272-409: A range of construction strategies and technologies that aim to optimize the distribution of solar heat in a building. Examples include solar chimneys , orienting a building to the sun, using construction materials that can store heat , and designing spaces that naturally circulate air . From 2020 to 2022, solar technology investments almost doubled from USD 162 billion to USD 308 billion, driven by

1378-430: A residential HP+PV system. It found that under typical inflation conditions, the lifecycle cost of natural gas and reversible, air-source heat pumps are nearly identical, which in part explains why heat pump sales have surpassed gas furnace sales in the U.S. for the first time during a period of high inflation. With higher rates of inflation or lower PV capital costs, PV becomes a hedge against rising prices and encourages

1484-489: A rocking switch. Later segmented commutators were used to produce direct current. Around 1838-40, William Fothergill Cooke and Charles Wheatstone developed a telegraph. In 1840 Wheatstone was using a magneto that he developed to power the telegraph. Wheatstone and Cooke made an important improvement in electrical generation by using a battery-powered electromagnet in place of a permanent magnet, which they patented in 1845. The self-excited magnetic field dynamo did away with

1590-470: A separate steam engine. It was located in a business and commercial district and supplied 110 volt direct current to 85 customers with 400 lamps. By 1884 Pearl Street was supplying 508 customers with 10,164 lamps. By the mid-1880s, other electric companies were establishing central power stations and distributing electricity, including Crompton & Co. and the Swan Electric Light Company in

1696-451: A small steam engine and boiler cost about $ 7,000 while an old blind horse that could develop 1/2 horsepower cost $ 20 or less. Machinery to use horses for power cost $ 300 or less. Many power requirements were less than that of a horse. Shop machines, such as woodworking lathes, were often powered with a one- or two-man crank. Household sewing machines were powered with a foot treadle; however, factory sewing machines were steam-powered from

1802-616: A spectrum, with many homesteaders creating foodstuffs or crafts to appeal to high-end niche markets in order to meet financial needs. Other homesteaders come to the lifestyle following successful careers which provide the funding for land, housing , taxes , and specialized equipment such as solar panels , farm equipment , and electric generators . Modern government regulation—in the form of property taxes, building codes , food safety codes , zoning regulations, minimum wage and social security for occasional labor, and town council restrictions on landscaping and animal keeping—can increase

1908-585: A sustainable way. Similarly, many households in the developing and developed world suffer from fuel poverty and cannot heat their houses enough. Existing heating practices are often polluting. A key sustainable solution to heating is electrification ( heat pumps , or the less efficient electric heater ). The IEA estimates that heat pumps currently provide only 5% of space and water heating requirements globally, but could provide over 90%. Use of ground source heat pumps not only reduces total annual energy loads associated with heating and cooling, it also flattens

2014-421: A thermal battery into the heat pump+solar energy heating system. It is easier to sustainably produce electricity than it is to sustainably produce liquid fuels. Therefore, adoption of electric vehicles is a way to make transport more sustainable. Hydrogen vehicles may be an option for larger vehicles which have not yet been widely electrified, such as long distance lorries. While electric vehicle technology

2120-702: A variety of environmental conditions and perform more efficiently allowing a greater proportion of photon energy to end up in the storage compounds, i.e., carbohydrates (rather than building and sustaining living cells). However, prominent research faces hurdles, Sun Catalytix a MIT spin-off stopped scaling up their prototype fuel-cell in 2012 because it offers few savings over other ways to make hydrogen from sunlight. Most new renewables are solar, followed by wind then hydro then bioenergy. Investment in renewables, especially solar, tends to be more effective in creating jobs than coal, gas or oil. Worldwide, renewables employ about 12 million people as of 2020, with solar PV being

2226-563: Is pumped-storage hydroelectricity , which requires locations with large differences in height and access to water. Batteries , and specifically lithium-ion batteries , are also deployed widely. They contain cobalt , which is largely mined in Congo , a politically unstable region. More diverse geographical sourcing may ensure the stability of the supply-chain and their environmental impacts can be reduced by downcycling and recycling. Batteries typically store electricity for short periods; research

SECTION 20

#1733086199510

2332-452: Is thermal energy (heat) extracted from the Earth's crust . It originates from several different sources , of which the most significant is slow radioactive decay of minerals contained in the Earth's interior , as well as some leftover heat from the formation of the Earth . Some of the heat is generated near the Earth's surface in the crust, but some also flows from deep within the Earth from

2438-410: Is a "sticky" form of energy, in that it tends to stay in the continent or island where it is produced. It is also multi-sourced; if one source suffers a shortage, electricity can be produced from other sources, including renewable sources . As a result, in the long term it is a relatively resilient means of energy transmission. In the short term, because electricity must be supplied at the same moment it

2544-471: Is a more economical means of long-term renewable energy storage, in terms of capital expenditures compared to pumped hydroelectric or batteries. Solar power produced around 1.3 terrawatt-hours (TWh) worldwide in 2022, representing 4.6% of the world's electricity. Almost all of this growth has happened since 2010. Solar energy can be harnessed anywhere that receives sunlight; however, the amount of solar energy that can be harnessed for electricity generation

2650-537: Is a technology for generating electricity by mixing fresh water and salty sea water in large power cells. Most marine energy harvesting technologies are still at low technology readiness levels and not used at large scales. Tidal energy is generally considered the most mature, but has not seen wide deployment. The world's largest tidal power station is on Sihwa Lake , South Korea, which produces around 550 gigawatt-hours of electricity per year. Earth emits roughly 10 W of infrared thermal radiation that flows toward

2756-419: Is about 800 times denser than air , even a slow flowing stream of water, or moderate sea swell , can yield considerable amounts of energy. Water can generate electricity with a conversion efficiency of about 90%, which is the highest rate in renewable energy. There are many forms of water energy: Much hydropower is flexible, thus complementing wind and solar. In 2021, the world renewable hydropower capacity

2862-520: Is common in Iceland, or to generate electricity. At smaller scales, geothermal power can be generated with geothermal heat pumps , which can extract heat from ground temperatures of under 30 °C (86 °F), allowing them to be used at relatively shallow depths of a few meters. Electricity generation requires large plants and ground temperatures of at least 150 °C (302 °F). In some countries, electricity produced from geothermal energy accounts for

2968-501: Is consumed, it is somewhat unstable, compared to fuels that can be delivered and stored on-site. However, that can be mitigated by grid energy storage and distributed generation . Solar and wind are variable renewable energy sources that supply electricity intermittently depending on the weather and the time of day. Most electrical grids were constructed for non-intermittent energy sources such as coal-fired power plants. As larger amounts of solar and wind energy are integrated into

3074-401: Is enough fuel for breeder reactors to satisfy the world's energy needs for 5 billion years at 1983's total energy consumption rate, thus making nuclear energy effectively a renewable energy. In addition to seawater the average crustal granite rocks contain significant quantities of uranium and thorium with which breeder reactors can supply abundant energy for the remaining lifespan of the sun on

3180-701: Is expected to be the first step in the electrification of the chemical industry with an expected large-scale implementation by 2025. Some cities in the United States have started prohibiting gas hookups for new houses, with state laws passed and under consideration to either require electrification or prohibit local requirements. The UK government is experimenting with electrification for home heating to meet its climate goals. Ceramic and Induction heating for cooktops as well as industrial applications (for instance steam crackers) are examples of technologies that can be used to transition away from natural gas. Electricity

3286-518: Is influenced by weather conditions , geographic location and time of day. There are two mainstream ways of harnessing solar energy: solar thermal , which converts solar energy into heat; and photovoltaics (PV), which converts it into electricity. PV is far more widespread, accounting for around two thirds of the global solar energy capacity as of 2022. It is also growing at a much faster rate, with 170 GW newly installed capacity in 2021, compared to 25 GW of solar thermal. Passive solar refers to

Homesteading - Misplaced Pages Continue

3392-460: Is more valuable than VRE countries with large hydroelectric developments such as Canada and Norway are spending billions to expand their grids to trade with neighboring countries having limited hydro. Biomass is biological material derived from living, or recently living organisms. Most commonly, it refers to plants or plant-derived materials. As an energy source, biomass can either be used directly via combustion to produce heat, or converted to

3498-596: Is not possible to use or store excess electricity. Electrical energy storage is a collection of methods used to store electrical energy. Electrical energy is stored during times when production (especially from intermittent sources such as wind power , tidal power , solar power ) exceeds consumption, and returned to the grid when production falls below consumption. Pumped-storage hydroelectricity accounts for more than 85% of all grid power storage . Batteries are increasingly being deployed for storage and grid ancillary services and for domestic storage. Green hydrogen

3604-520: Is often associated with unsustainable deforestation . As part of the global effort to limit climate change , most countries have committed to net zero greenhouse gas emissions . In practice, this means phasing out fossil fuels and replacing them with low-emissions energy sources. This much needed process, coined as "low-carbon substitutions" in contrast to other transition processes including energy additions, needs to be accelerated multiple times in order to successfully mitigating climate change. At

3710-501: Is often deployed together with further electrification . This has several benefits: electricity can move heat and vehicles efficiently and is clean at the point of consumption. Variable renewable energy sources are those that have a fluctuating nature, such as wind power and solar power. In contrast, controllable renewable energy sources include dammed hydroelectricity , bioenergy , or geothermal power . Renewable energy systems have rapidly become more efficient and cheaper over

3816-552: Is ongoing into technology with sufficient capacity to last through seasons. Pumped hydro storage and power-to-gas with capacity for multi-month usage has been implemented in some locations. As of 2018, thermal energy storage is typically not as convenient as burning fossil fuels . High upfront costs form a barrier for implementation. Seasonal thermal energy storage requires large capacity; it has been implemented in some high-latitude regions for household heat. The earliest commercial uses of electricity were electroplating and

3922-409: Is produced even during poor weather; during optimal weather energy generation may have to be curtailed . The final mismatch may be covered by using dispatchable energy sources such as hydropower, bioenergy, or natural gas. Energy storage helps overcome barriers for intermittent renewable energy, and is therefore an important aspect of a sustainable energy system. The most commonly used storage method

4028-472: Is relatively mature in road transport, electric shipping and aviation are still early in their development, hence sustainable liquid fuels may have a larger role to play in these sectors. A large fraction of the world population cannot afford sufficient cooling for their homes. In addition to air conditioning , which requires electrification and additional power demand, passive building design and urban planning will be needed to ensure cooling needs are met in

4134-477: Is that the heated water can be stored until it is needed, eliminating the need for a separate energy storage system. Solar thermal power can also be converted to electricity by using the steam generated from the heated water to drive a turbine connected to a generator. However, because generating electricity this way is much more expensive than photovoltaic power plants, there are very few in use today. Humans have harnessed wind energy since at least 3500 BC. Until

4240-662: Is to slow and eventually stop climate change , which is widely agreed to be caused mostly by greenhouse gas emissions . In general, renewable energy sources cause much lower emissions than fossil fuels. The International Energy Agency estimates that to achieve net zero emissions by 2050, 90% of global electricity generation will need to be produced from renewable sources. Renewables also cause much less air pollution than fossil fuels, improving public health, and are less noisy . The deployment of renewable energy still faces obstacles, especially fossil fuel subsidies , lobbying by incumbent power providers, and local opposition to

4346-463: The 2023 United Nations Climate Change Conference , around three-quarters of the world's countries set a goal of tripling renewable energy capacity by 2030. The European Union aims to generate 40% of its electricity from renewables by the same year. Renewable energy is more evenly distributed around the world than fossil fuels, which are concentrated in a limited number of countries. It also brings health benefits by reducing air pollution caused by

Homesteading - Misplaced Pages Continue

4452-501: The Faraday disk , a type of homopolar generator , using a copper disc rotating between the poles of a horseshoe magnet . Faraday's first electromagnetic generator produced a small DC voltage. Around 1832, Hippolyte Pixii improved the magneto by using a wire wound horseshoe, with the extra coils of conductor generating more current, but it was AC. André-Marie Ampère suggested a means of converting current from Pixii's magneto to DC using

4558-488: The NASA Office of Science and Technology Policy examined the concept and concluded that with current and near-future technologies it would be economically uncompetitive. Collection of static electricity charges from water droplets on metal surfaces is an experimental technology that would be especially useful in low-income countries with relative air humidity over 60%. Breeder reactors could, in principle, depending on

4664-505: The mantle and core . Geothermal energy extraction is viable mostly in countries located on tectonic plate edges, where the Earth's hot mantle is more exposed. As of 2023, the United States has by far the most geothermal capacity (2.7 GW, or less than 0.2% of the country's total energy capacity ), followed by Indonesia and the Philippines. Global capacity in 2022 was 15 GW. Geothermal energy can be either used directly to heat homes, as

4770-408: The telegraph . In the years 1831–1832, Michael Faraday discovered the operating principle of electromagnetic generators. The principle, later called Faraday's law , is based on an electromotive force generated in an electrical conductor that is subjected to a varying magnetic flux as, for example, a wire moving through a magnetic field. Faraday built the first electromagnetic generator, called

4876-564: The 1850s, many of these problems were solved by the arc lamp invented by William Petrie and William Staite. The lamp used a magneto-electric generator and had a self-regulating mechanism to control the gap between the two carbon rods. Their light was used to light up the National Gallery in London and was a great novelty at the time. These arc lamps and designs similar to it, powered by large magnetos, were first installed on English lighthouses in

4982-605: The 1930s and 1940s. The attractiveness of back-to-the-land movements dates from the Roman era , and has been noted in Asian poetry and philosophy tracts as well ( Agriculturalism ). In the 1700s, the philosophy of physiocracy developed in France and by the 1800s and early 1900s the philosophy of Agrarianism had taken hold in many places around the world. The ideas of modern homesteading proponents, such as Ralph Borsodi , gained in popularity in

5088-531: The 1960s in the United States. Self-sufficiency movements in the 1990s and 2000s began to apply the concept to urban and suburban settings, known as urban homesteading . According to author John Seymour , "urban homesteading" incorporates small-scale sustainable agriculture and homemaking . In homesteading, social and government support systems are frequently eschewed in favor of self-reliance and relative deprivation in order to maximize independence and self-determination . The degree of independence occurs along

5194-431: The 1970s and 1980s—from 49% of the world's population in 1970 to 76% in 1990. By the early 2010s, 81–83% of the world's population had access to electricity. Clean energy is mostly generated in the form of electricity, such as renewable energy or nuclear power . Switching to these energy sources requires that end uses, such as transport and heating, be electrified for the world's energy systems to be sustainable. In

5300-400: The 20th century, it was primarily used to power ships, windmills and water pumps. Today, the vast majority of wind power is used to generate electricity using wind turbines. Modern utility-scale wind turbines range from around 600 kW to 9 MW of rated power. The power available from the wind is a function of the cube of the wind speed, so as wind speed increases, power output increases up to

5406-437: The U.S. and Canada the use of heat pumps (HP) is economic if powered with solar photovoltaic (PV) devices to offset propane heating in rural areas and natural gas heating in cities. A 2023 study investigated: (1) a residential natural gas-based heating system and grid electricity, (2) a residential natural gas-based heating system with PV to serve the electric load, (3) a residential HP system with grid electricity, and (4)

SECTION 50

#1733086199510

5512-471: The U.S. from 1870 to 1880 each man-hour was provided with .55 hp. In 1950 each man-hour was provided with 5 hp, or a 2.8% annual increase, declining to 1.5% from 1930 to 1950. The period of electrification of factories and households from 1900 to 1940, was one of high productivity and economic growth. Most studies of electrification and electric grids focused on industrial core countries in Europe and

5618-559: The UK, Thomson-Houston Electric Company and Westinghouse in the US and Siemens in Germany . By 1890 there were 1000 central stations in operation. The 1902 census listed 3,620 central stations. By 1925 half of power was provided by central stations. One of the biggest problems facing the early power companies was the hourly variable demand. When lighting was practically the only use of electricity, demand

5724-460: The United States, Canada , and Australia . This resulted in the violent relocation of many Indigenous people. Guided by legal homestead principles , many of these "homestead acts" were instituted in the 19th and 20th centuries and targeted specific areas, with most being discontinued after a set time-frame or goal. Renewed interest in homesteading was brought about by U.S. President Franklin D. Roosevelt 's program of Subsistence Homesteading in

5830-496: The United States. Elsewhere, wired electricity was often carried on and through the circuits of colonial rule. Some historians and sociologists considered the interplay of colonial politics and the development of electric grids: in India, Rao showed that linguistics-based regional politics—not techno-geographical considerations—led to the creation of two separate grids; in colonial Zimbabwe (Rhodesia), Chikowero showed that electrification

5936-457: The adoption of heat pumps by also locking in both electricity and heating cost growth. The study concludes: "The real internal rate of return for such prosumer technologies is 20x greater than a long-term certificate of deposit , which demonstrates the additional value PV and HP technologies offer prosumers over comparably secure investment vehicles while making substantive reductions in carbon emissions." This approach can be improved by integrating

6042-461: The battery to power electromagnets. This type of dynamo was made by several people in 1866. The first practical generator, the Gramme machine , was made by Z.T. Gramme, who sold many of these machines in the 1870s. British engineer R.E.B. Crompton improved the generator to allow better air cooling and made other mechanical improvements. Compound winding, which gave more stable voltage with load, improved

6148-446: The burning of fossil fuels. The potential worldwide savings in health care costs have been estimated at trillions of dollars annually. The two most important forms of renewable energy, solar and wind, are intermittent energy sources : they are not available constantly, resulting in lower capacity factors . In contrast, fossil fuel power plants are usually able to produce precisely the amount of energy an electricity grid requires at

6254-778: The cold outer space. Solar energy hits the surface and atmosphere of the earth and produces heat. Using various theorized devices like emissive energy harvester (EEH) or thermoradiative diode, this energy flow can be converted into electricity. In theory, this technology can be used during nighttime. Producing liquid fuels from oil-rich (fat-rich) varieties of algae is an ongoing research topic. Various microalgae grown in open or closed systems are being tried including some systems that can be set up in brownfield and desert lands. There have been numerous proposals for space-based solar power , in which very large satellites with photovoltaic panels would be equipped with microwave transmitters to beam power back to terrestrial receivers. A 2024 study by

6360-543: The crops used to produce bioethanol and biodiesel are grown specifically for this purpose, although used cooking oil accounted for 14% of the oil used to produce biodiesel as of 2015. The biomass used to produce biofuels varies by region. Maize is the major feedstock in the United States, while sugarcane dominates in Brazil. In the European Union, where biodiesel is more common than bioethanol, rapeseed oil and palm oil are

6466-412: The deforestation of tropical rainforests in Brazil and Indonesia. In addition, burning biomass still produces carbon emissions, although much less than fossil fuels (39 grams of CO 2 per megajoule of energy, compared to 75 g/MJ for fossil fuels). Some biomass sources are unsustainable at current rates of exploitation (as of 2017). Biofuels are primarily used in transportation, providing 3.5% of

SECTION 60

#1733086199510

6572-523: The electric demand curve by eliminating the extreme summer peak electric supply requirements. However, heat pumps and resistive heating alone will not be sufficient for the electrification of industrial heat. This because in several processes higher temperatures are required which cannot be achieved with these types of equipment. For example, for the production of ethylene via steam cracking temperatures as high as 900 °C are required. Hence, drastically new processes are required. Nevertheless, power-to-heat

6678-585: The fastest-growing renewable energy technology. It is cheap, low-maintenance and scalable; adding to an existing PV installation as demanded arises is simple. Its main disadvantage is its poor performance in cloudy weather. PV systems range from small, residential and commercial rooftop or building integrated installations, to large utility-scale photovoltaic power station . A household's solar panels can either be used for just that household or, if connected to an electrical grid, can be aggregated with millions of others. The first utility-scale solar power plant

6784-740: The first electrical engineering firms in the world. Various forms of incandescent light bulbs had numerous inventors; however, the most successful early bulbs were those that used a carbon filament sealed in a high vacuum. These were invented by Joseph Swan in 1878 in Britain and by Thomas Edison in 1879 in the US. Edison’s lamp was more successful than Swan’s because Edison used a thinner filament, giving it higher resistance and thus conducting much less current. Edison began commercial production of carbon filament bulbs in 1880. Swan's light began commercial production in 1881. Swan's house, in Low Fell , Gateshead,

6890-548: The fuel cycle employed, extract almost all of the energy contained in uranium or thorium , decreasing fuel requirements by a factor of 100 compared to widely used once-through light water reactors , which extract less than 1% of the energy in the actinide metal (uranium or thorium) mined from the earth. The high fuel-efficiency of breeder reactors could greatly reduce concerns about fuel supply, energy used in mining, and storage of radioactive waste . With seawater uranium extraction (currently too expensive to be economical), there

6996-403: The grid, changes have to be made to the energy system to ensure that the supply of electricity is matched to demand. In 2019, these sources generated 8.5% of worldwide electricity, a share that has grown rapidly. There are various ways to make the electricity system more flexible. In many places, wind and solar production are complementary on a daily and a season scale: There is more wind during

7102-687: The horizontal axis units currently in use. As offshore wind speeds average ~90% greater than that of land, offshore resources can contribute substantially more energy than land-stationed turbines. Investments in wind technologies reached USD 161 billion in 2020, with onshore wind dominating at 80% of total investments from 2013 to 2022. Offshore wind investments nearly doubled to USD 41 billion between 2019 and 2020, primarily due to policy incentives in China and expansion in Europe. Global wind capacity increased by 557 GW between 2013 and 2021, with capacity additions increasing by an average of 19% each year. Since water

7208-446: The introduction of such power by changing over from an earlier power source. In the context of history of technology and economic development , electrification refers to the build-out of the electricity generation and electric power distribution systems. In the context of sustainable energy , electrification refers to the build-out of super grids with energy storage to accommodate the energy transition to renewable energy and

7314-509: The load factor around the world was greater than 50%, mainly due to motor load. Before widespread power distribution from central stations, many factories, large hotels, apartment and office buildings had their own power generation. Often this was economically attractive because the exhaust steam could be used for building and industrial process heat, which today is known as cogeneration or combined heat and power (CHP). Most self-generated power became uneconomical as power prices fell. As late as

7420-462: The load factor. The way this was eventually accomplished was through motor load. Motors are used more during daytime and many run continuously. Electric street railways were ideal for load balancing. Many electric railways generated their own power and also sold power and operated distribution systems. The load factor adjusted upward by the turn of the 20th century—at Pearl Street the load factor increased from 19.3% in 1884 to 29.4% in 1908. By 1929,

7526-408: The main feedstocks. China, although it produces comparatively much less biofuel, uses mostly corn and wheat. In many countries, biofuels are either subsidized or mandated to be included in fuel mixtures . There are many other sources of bioenergy that are more niche, or not yet viable at large scales. For instance, bioethanol could be produced from the cellulosic parts of crops, rather than only

7632-504: The main sequence of stellar evolution. Artificial photosynthesis uses techniques including nanotechnology to store solar electromagnetic energy in chemical bonds by splitting water to produce hydrogen and then using carbon dioxide to make methanol. Researchers in this field strived to design molecular mimics of photosynthesis that use a wider region of the solar spectrum, employ catalytic systems made from abundant, inexpensive materials that are robust, readily repaired, non-toxic, stable in

7738-471: The marginal cost of home production of food in areas affected by these restrictions. Careful choice of homesteading location is essential for economic success. Potential benefits of homesteading include a satisfying standard of living and a healthier, more rewarding lifestyle than more conventional patterns of living. Renewable energy Renewable energy (or green energy ) will be energy from renewable natural resources that are replenished on

7844-408: The maximum output for the particular turbine. Areas where winds are stronger and more constant, such as offshore and high-altitude sites, are preferred locations for wind farms. Wind-generated electricity met nearly 4% of global electricity demand in 2015, with nearly 63 GW of new wind power capacity installed. Wind energy was the leading source of new capacity in Europe, the US and Canada, and

7950-472: The medium-term, this variability may require keeping some gas-fired power plants or other dispatchable generation on standby until there is enough energy storage, demand response , grid improvement, and/or baseload power from non-intermittent sources. In the long-term, energy storage is an important way of dealing with intermittency. Using diversified renewable energy sources and smart grids can also help flatten supply and demand. Sector coupling of

8056-533: The mid 1850s, but the technology suffered power limitations. The first successful arc lamp (the Yablochkov candle ) was developed by Russian engineer Pavel Yablochkov using the Gramme generator . Its advantage lay in the fact that it did not require the use of a mechanical regulator like its predecessors. It was first exhibited at the Paris Exposition of 1878 and was heavily promoted by Gramme. The arc light

8162-530: The night and in winter, when solar energy production is low. Linking distant geographical regions through long-distance transmission lines allows for further cancelling out of variability. Energy demand can be shifted in time through energy demand management and the use of smart grids , matching the times when variable energy production is highest. With storage, energy produced in excess can be released when needed. Building additional capacity for wind and solar generation can help to ensure that enough electricity

8268-434: The operating characteristics of generators. The improvements in electrical generation technology in the 19th century increased its efficiency and reliability greatly. The first magnetos only converted a few percent of mechanical energy to electricity. By the end of the 19th century the highest efficiencies were over 90%. Sir Humphry Davy invented the carbon arc lamp in 1802 upon discovering that electricity could produce

8374-479: The past 30 years. A large majority of worldwide newly installed electricity capacity is now renewable. Renewable energy sources, such as solar and wind power, have seen significant cost reductions over the past decade, making them more competitive with traditional fossil fuels. In most countries, photovoltaic solar or onshore wind are the cheapest new-build electricity. From 2011 to 2021, renewable energy grew from 20% to 28% of global electricity supply. Power from

8480-571: The power generation sector with other sectors may increase flexibility: for example the transport sector can be coupled by charging electric vehicles and sending electricity from vehicle to grid . Similarly the industry sector can be coupled by hydrogen produced by electrolysis, and the buildings sector by thermal energy storage for space heating and cooling. Building overcapacity for wind and solar generation can help ensure sufficient electricity production even during poor weather. In optimal weather, it may be necessary to curtail energy generation if it

8586-482: The primary challenges for new developments. It is popular to repower old dams thereby increasing their efficiency and capacity as well as quicker responsiveness on the grid. Where circumstances permit existing dams such as the Russell Dam built in 1985 may be updated with "pump back" facilities for pumped-storage which is useful for peak loads or to support intermittent wind and solar power. Because dispatchable power

8692-412: The rate charged by the gas company, so the town council decided to use electricity. The system lit up arc lamps on the main streets and incandescent lamps on a few side streets with hydroelectric power. By 1882 between 8 and 10 households were connected, with a total of 57 lights. The system was not a commercial success, and the town reverted to gas. The first large scale central distribution supply plant

8798-429: The renewable energy sector. Globally in 2020 there are over 10 million jobs associated with the renewable energy industries, with solar photovoltaics being the largest renewable employer. The clean energy sectors added about 4.7 million jobs globally between 2019 and 2022, totaling 35 million jobs by 2022. Electrification Electrification is the process of powering by electricity and, in many contexts,

8904-585: The second largest in China. In Denmark, wind energy met more than 40% of its electricity demand while Ireland, Portugal and Spain each met nearly 20%. Globally, the long-term technical potential of wind energy is believed to be five times total current global energy production, or 40 times current electricity demand, assuming all practical barriers needed were overcome. This would require wind turbines to be installed over large areas, particularly in areas of higher wind resources, such as offshore, and likely also industrial use of new types of VAWT turbines in addition to

9010-523: The sector's increasing maturity and cost reductions, particularly in solar photovoltaic (PV), which accounted for 90% of total investments. China and the United States were the main recipients, collectively making up about half of all solar investments since 2013. Despite reductions in Japan and India due to policy changes and COVID-19 , growth in China, the United States, and a significant increase from Vietnam's feed-in tariff program offset these declines. Globally,

9116-418: The seed as is common today. Sweet sorghum may be a promising alternative source of bioethanol, due to its tolerance of a wide range of climates. Cow dung can be converted into methane. There is also a great deal of research involving algal fuel , which is attractive because algae is a non-food resource, grows around 20 times faster than most food crops, and can be grown almost anywhere. Geothermal energy

9222-451: The solar sector added 714 gigawatts (GW) of solar PV and concentrated solar power (CSP) capacity between 2013 and 2021, with a notable rise in large-scale solar heating installations in 2021, especially in China, Europe, Turkey, and Mexico. A photovoltaic system , consisting of solar cells assembled into panels , converts light into electrical direct current via the photoelectric effect . PV has several advantages that make it by far

9328-513: The sun and wind accounted for most of this increase, growing from a combined 2% to 10%. Use of fossil energy shrank from 68% to 62%. In 2022, renewables accounted for 30% of global electricity generation and are projected to reach over 42% by 2028. Many countries already have renewables contributing more than 20% of their total energy supply, with some generating over half or even all their electricity from renewable sources. The main motivation to replace fossil fuels with renewable energy sources

9434-795: The switch of end-uses to electricity. The electrification of particular sectors of the economy, particularly out of context, is called by modified terms such as factory electrification , household electrification , rural electrification and railway electrification . In the context of sustainable energy , terms such as transport electrification (referring to electric vehicles ) or heating electrification (referring to heat pumps ) are used. It may also apply to changing industrial processes such as smelting, melting, separating or refining from coal or coke heating, or to chemical processes to some type of electric process such as electric arc furnace , electric induction or resistance heating, or electrolysis or electrolytic separating. Electrification

9540-468: The technology employing the most at almost 4 million. However, as of February 2024, the world's supply of workforce for solar energy is lagging greatly behind demand as universities worldwide still produce more workforce for fossil fuels than for renewable energy industries. In 2021, China accounted for almost half of the global increase in renewable electricity. There are 3,146 gigawatts installed in 135 countries, while 156 countries have laws regulating

9646-407: The ten biggest solar power stations are in China, including the biggest, Golmud Solar Park in China. Unlike photovoltaic cells that convert sunlight directly into electricity, solar thermal systems convert it into heat. They use mirrors or lenses to concentrate sunlight onto a receiver, which in turn heats a water reservoir. The heated water can then be used in homes. The advantage of solar thermal

9752-501: The term is not synonymous with low-carbon energy . Some non-renewable sources of energy, such as nuclear power , generate almost no emissions, while some renewable energy sources can be very carbon-intensive, such as the burning of biomass if it is not offset by planting new plants. Renewable energy is also distinct from sustainable energy , a more abstract concept that seeks to group energy sources based on their overall permanent impact on future generations of humans. For example, biomass

9858-484: The use of land for renewable installations. Like all mining, the extraction of minerals required for many renewable energy technologies also results in environmental damage . In addition, although most renewable energy sources are sustainable , some are not. Renewable energy is usually understood as energy harnessed from continuously occurring natural phenomena. The International Energy Agency defines it as "energy derived from natural processes that are replenished at

9964-484: The world's transport energy demand in 2022, up from 2.7% in 2010. Biojet is expected to be important for short-term reduction of carbon dioxide emissions from long-haul flights. Aside from wood, the major sources of bioenergy are bioethanol and biodiesel . Bioethanol is usually produced by fermenting the sugar components of crops like sugarcane and maize , while biodiesel is mostly made from oils extracted from plants, such as soybean oil and corn oil . Most of

10070-502: The world, depending on the cost of drilling. EGS projects have so far primarily been limited to demonstration plants , as the technology is capital-intensive due to the high cost of drilling. Marine energy (also sometimes referred to as ocean energy) is the energy carried by ocean waves , tides , salinity , and ocean temperature differences . Technologies to harness the energy of moving water include wave power , marine current power , and tidal power . Reverse electrodialysis (RED)

10176-455: Was 1,360 GW. Only a third of the world's estimated hydroelectric potential of 14,000 TWh/year has been developed. New hydropower projects face opposition from local communities due to their large impact, including relocation of communities and flooding of wildlife habitats and farming land. High cost and lead times from permission process, including environmental and risk assessments, with lack of environmental and social acceptance are therefore

10282-517: Was built in 1982 in Hesperia, California by ARCO . The plant was not profitable and was sold eight years later. However, over the following decades, PV cells became significantly more efficient and cheaper. As a result, PV adoption has grown exponentially since 2010. Global capacity increased from 230 GW at the end of 2015 to 890 GW in 2021. PV grew fastest in China between 2016 and 2021, adding 560 GW, more than all advanced economies combined. Four of

10388-483: Was called "the greatest engineering achievement of the 20th Century" by the National Academy of Engineering , and it continues in both rich and poor countries. Electric lighting is highly desirable. The light is much brighter than oil or gas lamps, and there is no soot. Although early electricity was very expensive compared to today, it was far cheaper and more convenient than oil or gas lighting. Electric lighting

10494-422: Was high during the first hours before the workday and the evening hours when demand peaked. As a consequence, most early electric companies did not provide daytime service, with two-thirds providing no daytime service in 1897. The ratio of the average load to the peak load of a central station is called the load factor. For electric companies to increase profitability and lower rates, it was necessary to increase

10600-550: Was installed along the half mile length of Avenue de l'Opéra , Place du Theatre Francais and around the Place de l'Opéra in 1878. R. E. B. Crompton developed a more sophisticated design in 1878 which gave a much brighter and steadier light than the Yablochkov candle. In 1878, he formed Crompton & Co. and began to manufacture, sell and install the Crompton lamp. His concern was one of

10706-485: Was more efficient than small steam engines and because line shafts and belts had high friction losses. Electric motors were more efficient than human or animal power. The conversion efficiency for animal feed to work is between 4 and 5% compared to over 30% for electricity generated using coal. Electrification and economic growth are highly correlated. In economics, the efficiency of electrical generation has been shown to correlate with technological progress . In

10812-463: Was opened at Holborn Viaduct in London in 1882. Equipped with 1000 incandescent lightbulbs that replaced the older gas lighting, the station lit up Holborn Circus including the offices of the General Post Office and the famous City Temple church . The supply was a direct current at 110 V; due to power loss in the copper wires, this amounted to 100 V for the customer. Within weeks,

10918-605: Was racially based and served the white settler community while excluding Africans; and in Mandate Palestine, Shamir claimed that British electric concessions to a Zionist-owned company deepened the economic disparities between Arabs and Jews. While electrification of cities and homes has existed since the late 19th century, about 840 million people (mostly in Africa) had no access to grid electricity in 2017, down from 1.2 billion in 2010. Vast gains in electrification were seen in

11024-400: Was so much safer than oil or gas that some companies were able to pay for the electricity with the insurance savings. In 1851, Charles Babbage stated: One of the inventions most important to a class of highly skilled workers (engineers) would be a small motive power - ranging perhaps from the force of from half a man to that of two horses, which might commence as well as cease its action at

11130-545: Was the world's first to have working light bulbs installed. The Lit & Phil Library in Newcastle , was the first public room lit by electric light, and the Savoy Theatre was the first public building in the world lit entirely by electricity. The first central station providing public power is believed to be one at Godalming , Surrey, UK, in autumn 1881. The system was proposed after the town failed to reach an agreement on

11236-440: Was to feed a carbon electrode by gravity and maintain the gap with a pair of electromagnets, one of which retracted the upper carbon after the arc was started and the second controlled a brake on the gravity feed. Arc lamps of the time had very intense light output – in the range of 4,000 candlepower (candelas) – and released a lot of heat, and they were a fire hazard, all of which made them inappropriate for lighting homes. In

#509490