Misplaced Pages

#0

130-589: The Holden HJ is a series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971. All HJ models, aside from the One Tonner, were easily identified from the HQ by having a squared-off frontal treatment with wraparound indicator lights. The rear of

260-421: A saddle blanket or pad in order to provide a comfortable fit for the horse. It also has sturdier stirrups and uses a cinch rather than a girth . Its most distinctive feature is the horn on the front of the saddle, originally used to dally a lariat when roping cattle. Other nations such as Australia and Argentina have stock saddles that usually do not have a horn, but have other features commonly seen in

390-708: A sword , spare horse shoes and other equipment. In the US, the McClellan saddle was introduced in the 1850s by George B. McClellan for use by the United States Cavalry , and the core design was used continuously, with some improvements, until the 1940s. Today, the McClellan saddle continues to be used by ceremonial mounted units in the U.S. Army. The basic design that inspired McClellan saw use by military units in several other nations, including Rhodesia and Mexico, and even to

520-746: A A$ 149 million government grant to build a localised version of the Chevrolet Cruze in Australia from 2011, Holden in 2009 announced that it would initially import the small car unchanged from South Korea as the Holden Cruze. Following the government grant announcement, Kevin Rudd , Australia's Prime Minister at the time, stated that production would support 600 new jobs at the Elizabeth facility; however, this failed to take into account Holden's previous announcement, whereby 600 jobs would be shed when production of

650-523: A V-shaped arrangement of strap billets on the sideboards for the attachment of the girth. This girthing system could be moved forward or back to obtain an optimum fit on a wide range of horses. From 1902 the Universal Military Saddle was manufactured with a fixed tree, broad panels to spread the load, and initially a front arch in three sizes. The advantage of this saddle was its lightness, ease of repair and comfort for horse and rider. From 1912

780-483: A base of wood with a thin leather covering that frequently has a lacquer finish. Central Asian saddles have no pad and must be ridden with a saddle blanket. The horn comes in particular good use during the rough horseback sport of buskashi , played throughout Central Asia, which involves two teams of riders wrestling over a decapitated goat's carcass. In the Near East, a saddle large enough to carry more than one person

910-687: A degree by the British in the Boer War . Military saddles are still produced and are now used in exhibitions, parades and other events. Saddles in Asia date to the time of the Scythians and Cimmerians . Modern Asian saddles can be divided into two groups: those from nomadic Eurasia, which have a prominent horn and leather covering, and those from East Asia, which have a high pommel and cantle. Central Asian saddles are noted for their wide seats and high horns. The saddle has

1040-497: A lack of Australian identity and internal company competition, decreasing the brand recognition and desirability of Holden in its domestic market. This led to the announcement, on 11 December 2013, that Holden would cease vehicle and engine production by the end of 2017. On 29 November 2016, engine production at the Fishermans Bend plant was shut down. On 20 October 2017, production of the last Holden designed Commodore ceased and

1170-465: A large four-storey factory on the site. By 1923, HMBB were producing 12,000 units per year. During this time, HMBB assembled bodies for Ford Motor Company of Australia until its Geelong plant was completed. From 1924, HMBB became the exclusive supplier of car bodies for GM in Australia, with manufacturing taking place at the new Holden Woodville Plant (which was actually in the adjacent suburb of Cheltenham ). These bodies were made to suit

1300-600: A leather covering. Japanese saddles are classified as Chinese-style ( karagura ) or Japanese-style ( yamatogura ). In the Nara period the Chinese style was adopted. Gradually the Japanese changed the saddle to suit their needs, and in the Heian period , the saddle typically associated with the samurai class was developed. These saddles, known as kura , were lacquered as protection from

1430-528: A market share of more than 50% in 1958 with the revised FC model. This was the first Holden to be tested on the new Lang Lang Proving Ground in Lang Lang, Victoria . In 1957, Holden's export markets grew to 17 countries, with new additions including Indonesia, Hong Kong, Singapore, Fiji, Sudan, the East Africa region, and South Africa. Indonesian market cars were assembled locally by P.T. Udatin. The opening of

SECTION 10

#1732876218000

1560-557: A number of chassis imported from manufacturers including Austin , Buick , Chevrolet , Cleveland , Dodge , Essex , Fiat , Hudson , Oakland , Oldsmobile , Overland , Reo , Studebaker and Willys-Knight . In 1926, General Motors (Australia) Limited was established with assembly plants at Newstead, Queensland ; Marrickville, New South Wales ; City Road, Melbourne, Victoria ; Birkenhead, South Australia ; and Cottesloe, Western Australia using bodies produced by HMBB and imported complete knock down chassis. In 1930 alone,

1690-557: A partner and effectively managed the company. In 1885, German-born H. A. Frost joined the business as a junior partner and J. A. Holden & Co became Holden & Frost Ltd. Edward Holden , James' grandson, joined the firm in 1905 with an interest in automobiles. From there, the firm evolved through various partnerships, and in 1908, Holden & Frost moved into the business of minor repairs to car upholstery. The company began to re-body older chassis using motor bodies produced by F. T. Hack and Co from 1914. Holden & Frost mounted

1820-560: A pommel and cantle with detachable bone/horn/hardened leather facings, leather thongs, a crupper , breastplate , and a felt shabrack adorned with animal motifs. These were located in Pazyryk burials finds. These saddles, found in the Ukok Plateau , Siberia were dated to 500-400 BC. Iconographic evidence of a predecessor to the modern saddle has been found in the art of the ancient Armenians , Assyrians , and steppe nomads depicted on

1950-417: A problem, as shorter trees are most often on saddles made for children, though a short tree with an unbalanced adult rider may create abnormal pressure points. While a horse's back can be measured for size and shape, the saddle must be tried on the individual animal to assure proper fit. Saddle blankets or pads can provide assistance to correct minor fit problems, as well as provide comfort and protection to

2080-502: A properly conditioned horse and rider. British Universal Pattern military saddles were used by the mounted forces from Australia, Britain, Canada, New Zealand and South Africa . The Steel Arch Universal Pattern Mark I was issued in 1891. This was found to irritate riders and in 1893 it was discontinued in favour of the Mark II . In 1898, the Mark III appeared, which had the addition of

2210-821: A range of Opel-derived cars comprising the Astra VXR and Insignia VXR (both based on the OPC models sold by Vauxhall) and Cascada . Later that year, Holden also announced plans to sell the European Astra and the South Korean Cruze alongside each other from 2017. Saddle The word "saddle" originates from the Old English word sadol which in turn comes from the Proto-Germanic language * sathulaz , with cognates in various other Indo-European languages , including

2340-522: A result of GM's toying with the Wankel rotary engine , as used by Mazda of Japan, an export agreement was initiated in 1975. This involved Holden exporting with powertrains , HJ, and later, HX series Premiers as the Mazda Roadpacer AP . Mazda then fitted these cars with the 13B rotary engine and three-speed automatic transmission. Production ended in 1977, after just 840 units sold. Development of

2470-528: A solid tree nor stirrups, these early treeless saddles and pads provided protection and comfort to the rider, with a slight increase in security. The Sarmatians also used a padded treeless early saddle, possibly as early as the seventh century BC and ancient Greek artworks of Alexander the Great of Macedon depict a saddle cloth. The Greeks called the saddlecloth or pad, ephippium (ἐφίππιον or ἐφίππειον). Early solid-treed saddles were made of felt that covered

2600-420: A steady decline. Total Holden sales peaked in 2002 at 178 392 vehicles and were stable up to 2005 before declining for the rest of the decade and the next. This downturn affected Holden's profits; the company recorded a combined gain of A$ 842.9 million from 2002 to 2004, and a combined loss of A$ 290 million from 2005 to 2006. Factors contributing to the loss included the development of an all-new model,

2730-723: A three-door hatchback variant. A final UC update appeared in 1978. During its production run, the Torana achieved legendary racing success in Australia, achieving victories at the Mount Panorama Circuit in Bathurst, New South Wales. In 1975, Holden introduced the compact Gemini , the Australian version of the " T-car ", based on the Opel Kadett C. The Gemini was an overseas design developed jointly with Isuzu, GM's Japanese affiliate; and

SECTION 20

#1732876218000

2860-408: A western saddle, including a deep seat, high cantle, and heavier leather. The tree of a western saddle is the most critical component, defining the size and shape of the finished product. The tree determines both the width and length of the saddle as it sits on the back of the horse, as well as the length of the seat for the rider, width of the swells (pommel), height of cantle, and, usually, shape of

2990-463: A wheelbase which was three inches (76.2  mm) longer than that of the sedans. The performance-orientated Monaro range included two-door coupe and four-door sedan models: The base model Monaro Coupe was not carried forward from the HQ series, and the new range also saw the demise of the Monaro GTS350 Coupe and Sedan, meaning that the imported Chevrolet 350-cubic-inch (5.7-litre) V8 engine

3120-740: A wooden frame. Chinese saddles are depicted among the cavalry horses in the Terracotta Army of the Qin dynasty , completed by 206 BC. Asian designs proliferated during China 's Han dynasty around approximately 200 BC. One of the earliest solid-treed saddles in the Western world was the "four horn" design, first used by the Romans as early as the 1st century BC. Neither design had stirrups. Recent archeological finds in Mongolia (e.g. Urd Ulaan Uneet site) suggest that

3250-435: Is a vital rule for fitting that no damage should occur to the horse's skin and no injury should be presented to any muscular or neural tissues beneath the saddle. Width of the saddle is the primary means by which a saddle is measured and fitted to a horse, though length of the tree and proper balance must also be considered. The gullet of a saddle must clear the withers of the horse, but yet must not be so narrow as to pinch

3380-409: Is an art and in ideal circumstances is performed by a professional saddle maker or saddle fitter. Custom-made saddles designed for an individual horse and rider will fit the best, but are also the most expensive. However, many manufactured saddles provide a decent fit if properly selected, and some minor adjustments can be made. The definition of a fitting saddle is still controversial; however, there

3510-628: Is associated with the Subeixi Culture, which is associated with the Jushi Kingdom described in later Chinese sources. The Subeixi people had contact with Scythians, and share a similar material culture with the Pazyryk culture , where later saddles were found. Eurasian and Northern Asian nomads on the Mongolian plateau developed an early form of saddle with a rudimentary frame, which included two parallel leather cushions, with girth attached to them,

3640-458: Is called a howdah which is fitted on elephants. Some of the largest examples of a saddle, elaborate howdah were used in warfare outfitted with weaponry, and alternatively for monarchs, maharajahs, and sultans. Saddles from East Asia differ from Central Asian saddles by their high pommel and cantle and lack of a horn. East Asian saddles can be divided into several types that are associated with certain nationalities and ethnic groups. Saddles used by

3770-501: Is considerable friction across the center line of a horse's back. The stirrup was one of the milestones in saddle development. The first stirrup-like object was invented in India in the 2nd century BC, and consisted of a simple leather strap in which the rider's toe was placed. It offered very little support, however. Mongolic Rouran tribes in Mongolia are thought to have been the inventors of

3900-454: Is its flatter appearance, the lack of a horn, and the self-padding design of the panels : a pair of pads attached to the underside of the seat and filled with wool, foam, or air. However, the length and angle of the flaps, the depth of the seat and height of the cantle all play a role in the use for which a particular saddle is intended. The "tree" that underlies the saddle is usually one of the defining features of saddle quality. Traditionally,

4030-673: The High Feature engine. This was built at the Fishermans Bend facility completed in 2003, with a maximum output of 900 engines per day. This has reportedly added A$ 5.2 billion to the Australian economy; exports account for about A$ 450 million alone. After the VZ, the High Feature engine powered the all-new Holden Commodore (VE) . In contrast to previous models, the VE no longer used an Opel-sourced platform adapted both mechanically and in size, but

Holden HJ - Misplaced Pages Continue

4160-603: The Adventra , a Commodore-based station wagon. The fourth model to be replaced with a South Korean alternative was the Vectra by the mid-size Epica in 2007. As a result of the split between GM and Isuzu, Holden lost the rights to use the "Rodeo" nameplate. Consequently, the Holden Rodeo was facelifted and relaunched as the Colorado in 2008. Following Holden's successful application for

4290-774: The Australian stock saddle . In Asia and throughout the world, there are numerous saddles of unique designs used by various nationalities and ethnic groups. English saddles are used for English riding throughout the world, not just in England or English-speaking countries. They are the saddles used in all of the Olympic equestrian disciplines. The term English saddle encompasses several different styles of saddle, including those used for eventing , show jumping and hunt seat , dressage , saddle seat , horse racing , horse surfing and polo . The major distinguishing feature of an English saddle

4420-724: The Daewoo Kalos , replaced the Opel Corsa as the source of the Barina. In the same year, the Viva, based on the Daewoo Lacetti , replaced the entry-level Holden Astra Classic, although the new-generation Astra introduced in 2004 continued on. The Captiva crossover SUV came next in 2006. After discontinuing the Frontera and Jackaroo models in 2003, Holden was only left with one all-wheel drive model:

4550-552: The Dandenong , Melbourne , production facility in 1956 brought further jobs; by 1959, Holden employed 19,000 workers country-wide. In 1959, complete knock-down assembly began in South Africa and Indonesia. In 1960, Holden introduced its third major new model, the FB . The car's style was inspired by 1950s Chevrolets, with tailfins and a wrap-around windscreen with "dog leg" A-pillars . By

4680-593: The Family II engine ceased in late 2009. In March 2012, Holden was given a $ 270 million lifeline by the Australian Federal Government (Labor Party of Australia) along with the South Australian and Victorian state governments. In return, Holden planned to inject over $ 1 billion into car manufacturing in Australia. They estimated the new investment package would return around $ 4 billion to

4810-545: The HR was introduced, including changes in the form of new front and rear styling and higher-capacity engines. More significantly, the HR fitted standard front seat belts; Holden thus became the first Australian automaker to provide the safety device as standard equipment across all models. This coincided with the completion of the production plant in Acacia Ridge, Queensland . By 1963, Holden

4940-665: The Han Chinese are noted by their use of inlay work for ornamentation. Tibetan saddles typically employ iron covers inlaid with precious metals on the pommel and cantle and universally come with padding. Mongolian saddles are similar to the Tibetan style except that they are typically smaller and the seat has a high ridge. Saddles from ethnic minority groups in China's southwest, such as in Sichuan and Yunnan provinces, have colorful lacquer work over

5070-685: The Holden Astra , as a result of a deal with Nissan. This arrangement ceased in 1989 when Holden entered a new alliance with Toyota, forming a new company: United Australian Automobile Industries (UAAI). UAAI resulted in Holden selling rebadged versions of Toyota's Corolla and Camry , as the Holden Nova and Apollo respectively, with Toyota re-branding the Commodore as the Lexcen. The company changed throughout

5200-513: The Statesman WB limousines were introduced in 1980. However, the designs, based on the HQ and updated HJ, HX and HZ models from the 1970s were less competitive than similar models in Ford's lineup. Thus, Holden abandoned those vehicle classes altogether in 1984. Sales of the Commodore also fell, with the effects of the 1979 energy crisis lessening, and for the first time the Commodore lost ground to

5330-479: The "Holden". The unofficial usage of the name "FX" originated within Holden, referring to the updated suspension on the 48–215 of 1953. During the 1950s, Holden dominated the Australian car market. GM invested heavily in production capacity, which allowed the company to meet increased postwar demand for motor cars. Less expensive, four-cylinder cars did not offer Holdens the ability to deal with rugged rural areas. Holden 48–215 sedans were produced in parallel with

Holden HJ - Misplaced Pages Continue

5460-409: The 18th century, fox hunting became increasingly popular in England. The high-cantle, high-pommel design of earlier saddles became a hindrance, unsafe and uncomfortable for riders as they jumped. Due to this fact, Guérinière's saddle design which included a low pommel and cantle and allowed for more freedom of movement for both horse and rider, became increasingly popular throughout northern Europe. In

5590-609: The 1950s, the declining sales of large sedan cars in Australia led the company to look to international markets to increase profitability. In 2013, Holden revealed it received A$ 2.17 billion in Federal Government assistance in the past 12 years, the amount was much larger than expected. Holden blamed a strong Australian currency, high manufacturing costs and a small domestic market among the reasons for exit of local manufacturing. The Australian population also blamed GM's consistent mishandling of rebadging Holden's lineup leading to

5720-546: The 1970s, Holden ran an advertising jingle "Football, Meat Pies, Kangaroos, and Holden cars", a localised version of the "Baseball, Hot Dogs, Apple Pies, and Chevrolet" jingle used by GM's Chevrolet division in the United States. Holden discontinued the Torana in 1979 and the Sunbird in 1980. After the 1978 introduction of the Commodore, the Torana became the "in-between" car, surrounded by the smaller and more economical Gemini and

5850-455: The 1990s, increasing its Australian market share from 21 percent in 1991 to 28.2 percent in 1999. Besides manufacturing Australia's best selling car, which was exported in significant numbers, Holden continued to export many locally produced engines to power cars made elsewhere. In this decade, Holden adopted a strategy of importing cars it needed to offer a full range of competitive vehicles. During 1998, General Motors-Holden's Ltd name

5980-624: The 5.7-litre LS unit. The UAAI badge-engineered cars first introduced in 1989 sold in far fewer numbers than anticipated, but the Holden Commodore, Toyota Camry, and Corolla were all successful when sold under their original nameplates. The first generation Nova and the donor Corolla were produced at Holden's Dandenong, Victoria facility until 1994. UAAI was dissolved in 1996, and Holden returned to selling only GM products. The Holden Astra and Vectra , both designed by Opel in Germany, replaced

6110-568: The 50-2106 coupé utility from 1951; the latter was known colloquially as the "ute" and became ubiquitous in Australian rural areas as the workhorse of choice. Production of both the utility and sedan continued with minor changes until 1953, when they were replaced by the facelifted FJ model, introducing a third panel van body style. The FJ was the first major change to the Holden since its 1948 introduction. Over time, it gained iconic status and remains one of Australia's most recognisable automotive symbols. A new horizontally slatted grille dominated

6240-730: The Assyrian stone relief carvings from the time of Ashurnasirpal II . Some of the earliest saddle-like equipment were fringed cloths or pads used by Assyrian cavalry around 700 BC. These were held on with a girth or surcingle that included breast straps and cruppers . From the earliest depictions, saddles became status symbols . To show off an individual's wealth and status, embellishments were added to saddles, including elaborate sewing and leather work, precious metals such as gold, carvings of wood and horn, and other ornamentation. The Scythians also developed an early saddle that included padding and decorative embellishments. Though they had neither

6370-534: The Australian Government to halt the lowering of car import tariffs. By 1997, the federal government had already cut tariffs to 22.5 percent, from 57.5 percent ten years earlier; by 2000, a plan was formulated to reduce the tariffs to 15 percent. Holden was critical, saying that Australia's population was not large enough, and that the changes could tarnish the local industry. Holden reintroduced its defunct Statesman title in 1990—this time under

6500-508: The Australian economy and see GM Holden continue making cars in Australia until at least 2022. In mid-2013, Holden sought a further A$ 265 million, in addition to the A$ 275 ;million that was already committed by the Federal, South Australian and Victorian governments to remain viable as a car manufacturer in Australia. A source close to Holden informed the Australian news publication that

6630-409: The Australian government outlining the production of the first Australian-designed car. Ford's proposal was the government's first choice, but required substantial financial assistance. GM's study was ultimately chosen because of its low level of government intervention. After the war, Holden returned to producing vehicle bodies, this time for Buick, Chevrolet, Pontiac, and Vauxhall. The Oldsmobile Ace

SECTION 50

#1732876218000

6760-593: The Commodore's recovery strategy involved the 1988 VN , a significantly wider model powered by the American-designed, Australian-assembled 3.8-litre Buick V6 engine . Holden began to sell the subcompact Suzuki Swift -based Barina in 1985. The Barina was launched concurrently with the Suzuki -sourced Holden Drover , followed by the Scurry later on in 1985. In the previous year, Nissan Pulsar hatchbacks were rebadged as

6890-415: The Dandenong line on 25 October 1962. Following the Chevrolet V8 fitted to the HK, the first Australian-designed and mass-produced V8, the Holden V8 engine debuted in the Hurricane concept of 1969 before fitment to facelifted HT model . This was available in two capacities: 253 and 308 cubic inches (4.1 and 5.0 L). Late in HT production, use of the new Tri-Matic automatic transmission, first seen in

7020-420: The Elizabeth plant was shut down. Holden produced nearly 7.7 million vehicles. On 17 February 2020, General Motors announced that the Holden marque would be retired by 2021. On 30 October 2020, the GM Australia Design Studio at Fishermans Bend was shut down. Holden has been replaced by GM Specialty Vehicles (GMSV), which imports the Chevrolet Silverado and the Chevrolet Corvette . The parts supplier known as

7150-502: The Ford Falcon. Sales in other segments also suffered when competition from Ford intensified, and other Australian manufacturers: Mitsubishi , Nissan and Toyota gained market share. When released in 1982, the Camira initially generated good sales, which later declined because buyers considered the 1.6-litre engine underpowered, and the car's build and ride quality below-average. The Camira lasted just seven years, and contributed to Holden's accumulated losses of over A$ 500 million by

7280-418: The Holden Trade Club was renamed GM Trade Parts. An extensive Holden service network continues to help maintain the many Holdens that remain in operation in Australia. In 1852 James Alexander Holden emigrated to South Australia from Walsall , Staffordshire, U.K, and in 1856 established J. A. Holden & Co. , a saddlery business in Adelaide . In 1879 J. A. Holden's eldest son Henry James Holden , became

7410-430: The Holden marque, as the Statesman and Caprice . For 1991, Holden updated the Statesman and Caprice with a range of improvements, including the introduction of four-wheel anti-lock brakes (ABS); although, a rear-wheel system had been standard on the Statesman Caprice from March 1976. ABS was added to the short-wheelbase Commodore range in 1992. Another returning variant was the full-size utility, and on this occasion it

7540-433: The Kingswood sedan, station wagon, and utility body styles to Indonesia, Trinidad and Tobago, Pakistan, the Philippines, and South Africa in complete knock-down form. Holden launched the new HQ series in 1971. At this time, the company was producing all of its passenger cars in Australia, and every model was of Australian design; however, by the end of the decade, Holden was producing cars based on overseas designs. The HQ

7670-421: The LC Torana was phased in as Powerglide stock was exhausted, but Holden's official line was that the HG of 1971 was the first full-sized Holden to receive it. Despite the arrival of serious competitors—namely, the Ford Falcon, Chrysler Valiant , and Japanese cars—in the 1960s, Holden's locally produced large six- and eight-cylinder cars remained Australia's top-selling vehicles. Sales were boosted by exporting

7800-449: The Latin sella . Some saddles also include: There is evidence, though disputed, that humans first began riding the horse not long after domestication , possibly as early as 4000 BC. The earliest saddle known thus far was discovered inside a woman's tomb in the Turpan basin , in what is now Xinjiang , China , dating to between 727–396 BC. The saddle is made of cushioned cow hide, and shows signs of usage and repair. The tomb

7930-510: The Monaro GTS models. The cab/chassis model was marketed as the Holden One Tonner, which in base form still used its own unique front treatment introduced with the previous HQ range, and would continue with the model until 1980. If a cab chassis or van was optioned as a BO6 (ambulance) it was fitted with the HJ Premier front and door trims. 2.8-litre and 3.3-litre inline six-cylinder engines were available, as were 4.2-litre and 5.0-litre V8 units. The two Monaro GTS models were only offered with

SECTION 60

#1732876218000

8060-445: The Mongolic Rouran tribes had sophisticated, wooden frame saddles as early as the 3rd century AD. The wooden frame saddle found at the Urd Ulaan Uneet site in Mongolia is one of the earliest examples found in Central and East Asia. The development of the solid saddle tree was significant; it raised the rider above the horse's back, and distributed the rider's weight on either side of the animal's spine instead of pinpointing pressure at

8190-408: The Torana continued in with the larger mid-sized LH series released in 1974, offered only as a four-door sedan. The LH Torana was one of the few cars worldwide engineered to accommodate four-, six-, and eight-cylinder engines. This trend continued until Holden introduced the Sunbird in 1976, essentially the four-cylinder Torana with a new name. Designated LX, both the Sunbird and Torana introduced

8320-454: The Toyota-sourced Holden Nova and Apollo. This came after the 1994 introduction of the Opel Corsa replacing the already available Suzuki Swift as the source for the Holden Barina. Sales of the full-size Holden Suburban SUV sourced from Chevrolet commenced in 1998—lasting until 2001. Also in 1998, local assembly of the Vectra began at Elizabeth, South Australia. These cars were exported to Japan and Southeast Asia with Opel badges. However,

8450-501: The Vectra did not achieve sufficient sales in Australia to justify local assembly, and reverted to being fully imported in 2000. In the 1990s, Holden's share of the Australian market surged and peaked at 27.5 percent in 2000 before declining to 15.2 percent in 2006. From March 2003, Holden no longer held the number one sales position in Australia, losing ground to Toyota. Commodore sales had peaked in 1998 at 94 642 vehicles and were relatively stable up to 2004 before going into

8580-440: The basic fleet model , the Standard , became the Belmont. On 3 March 1969, Alexander Rhea , managing director of General Motors-Holden's at the time, was joined by press photographers and the Federal Minister of Shipping and Transport, Ian Sinclair as the two men drove the two-millionth Holden, an HK Brougham, off the production line. This came just over half a decade since the one-millionth car, an EJ Premier sedan, rolled off

8710-486: The body, and painted and trimmed it. The company began to produce complete motorcycle sidecar bodies after 1913. After 1917, wartime trade restrictions led the company to start full-scale production of vehicle body shells. H. J. Holden founded a new company in late 1917, and registered Holden's Motor Body Builders Ltd (HMBB) on 25 February 1919, specialising in car bodies and using the former F. T. Hack & Co facility at 400 King William Street in Adelaide before erecting

8840-402: The car company is losing money on every vehicle that it produces and consequently initiated negotiations to reduce employee wages by up to A$ 200 per week to cut costs, following the announcement of 400 job cuts and an assembly line reduction of 65 (400 to 335) cars per day. From 2001 to 2012, Holden received over A$ 150 million a year in subsidy from Australian government. The subsidy from 2007

8970-411: The company in 2002 as a representative of GM. This was increased to 50.9 percent in 2005, but when GM further increased its stake to 70.1 percent around the time of its 2009 Chapter 11 reorganisation , Holden's interest was relinquished and transferred to another (undisclosed) part of GM. The commencement of the Holden-branded Daewoo models began with the 2005 Holden Barina, which based on

9100-446: The country under Holden management. In the postwar period, this decentralisation was slowly reduced and, by 1989, the consolidation of final assembly at Elizabeth in South Australia was largely completed, except for some operations that continued at Dandenong until 1994. Engine manufacturing was consolidated at Fishermans Bend , which was expanded to supply markets overseas. Although Holden's involvement in exports had fluctuated from

9230-404: The development days, the six-cylinder Torana was reserved for motor racing, but research had shown a business case existed for such a model. The LC Torana was the first application of Holden's new three-speed Tri-Matic automatic transmission. This was the result of Holden's A$ 16.5 million transformation of the Woodville, South Australia, factory for its production. Holden's association with

9360-484: The early 1990s. The plants had belonged to General Motors from 1926 until 1990 in an earlier and quite separate operation from GM's Holden operations in Australia. Holden's production became increasingly concentrated in South Australia and Victoria after World War II . However, Holden had factories in all five mainland states of Australia when GM took over in 1931, due to the combining of Holden and GM factories around

9490-659: The early 20th century, Captain Frederico Caprilli revolutionized the jumping saddle by placing the flap at an angle that allowed a rider to achieve the forward seat necessary for jumping high fences and traveling rapidly across rugged terrain. The modern Western saddle was developed from the Spanish saddles that were brought by the Spanish Conquistadors when they came to the Americas . These saddles were adapted to suit

9620-722: The eight-cylinder engines. 13B Wankel in the Mazda Roadpacer AP which is a rebadged HJ Premier. The Holden HJ was replaced by the Holden HX series in July 1976, HJ production having totalled 176,202 vehicles. The Statesman HJ range of long-wheelbase luxury sedans developed from the Holden HJ series was also released in 1974. The two models in the range, the de Ville and the Caprice, were marketed as Statesmans rather than as Holdens. Holden Holden , formerly known as General Motors-Holden ,

9750-477: The end of 2017. As a result, 2,900 jobs would be lost over four years. Beyond 2017 Holden's Australian presence would consist of a national sales company, a parts distribution centre and a global design studio. In May 2014, GM reversed their decision to abandon the Lang Lang Proving Ground and decided to keep it as part of its engineering capability in Australia. In 2015, Holden again began selling

9880-641: The end of 2020. Holden's primary products were its own models developed in-house, such as the Holden Commodore , Holden Caprice , and the Holden Ute . However, Holden had also offered badge-engineered models under sharing arrangements with Nissan , Suzuki , Toyota , Isuzu , and then GM subsidiaries Opel , Vauxhall and Chevrolet . The vehicle lineup had included models from GM Korea , GM Thailand, and GM North America. Holden had also distributed GM's German Opel marque in Australia in 2012 and 2013. Holden

10010-769: The engine locally for the Camira model, and to export markets - primarily to GM's plants in Europe for installation in Opel/Vauxhall vehicles. While GM Australia's commercial vehicle range had originally been mostly based on Bedford products, these had gradually been replaced by Isuzu products as the Bedford brand was being retired in Britain. This process began in the 1970s and by 1982 Holden's commercial vehicle arm no longer offered any Bedford products. The new Holden WB commercial vehicles and

10140-600: The firm, largely through the use of public relations , a then novel form of business communication which was imported to Australia through the formation of General Motors (Australia) Limited. Throughout the 1920s, Holden also supplied 60 W-class tramcar bodies to the Melbourne & Metropolitan Tramways Board , of which several examples have been preserved in both Australia and New Zealand. Holden's second full-scale car factory, located in Fishermans Bend ( Port Melbourne ),

10270-516: The four-wheel drive Jackaroo (1981), the Shuttle (1982) van and the Piazza (1986) three-door sports hatchback. The second generation Holden Gemini from 1985 was also based on an Isuzu design, although, its manufacture was undertaken in Australia. In 1981, the Fishermans Bend engine plant began production of the Family II - part of a global engine programme for GM's compact vehicles. The plant supplied

10400-591: The front end of the FJ, which received various other trim and minor mechanical revisions. In 1954, Holden began exporting the FJ to New Zealand. Although little changed from the 48–215, marketing campaigns and price cuts kept FJ sales steady until a completely redesigned model was launched. At the 2005 Australian International Motor Show in Sydney, Holden paid homage to the FJ with the Efijy concept car . Commercial success underpinned

10530-437: The horn. Traditional trees were made of wood or wood laminate covered with rawhide and this style is still manufactured today, though modern synthetic materials are also used. The rawhide is stretched and molded around the tree, with minimal padding between the tree and the exterior leather, usually a bit of relatively thin padding on the seat, and a sheepskin cover on the underside of the skirts to prevent chafing and rubbing on

10660-407: The horse's back, but no amount of padding can compensate for a poor-fitting saddle. For example, saddles that are either too wide or too narrow for the horse will cause change in pressure points and ultimately muscle atrophy in the epaxial muscles . The common problems associated with saddle fitting problems are: bridging, ill-fitting headplates and incorrect stuffing of the panels. Depending on

10790-441: The horse's back. The tree must be positioned so that the tree points (English) or bars (Western) do not interfere with the movement of the horse's shoulder. The seat of the saddle must be positioned so that the rider, when riding correctly, is placed over the horse's center of balance . The bars of the saddle must not be so long that they place pressure beyond the last rib of the horse. A too-short tree alone does not usually create

10920-421: The horse. Though a western saddle is often considerably heavier than an English saddle, the tree is designed to spread out the weight of the rider and any equipment the rider may be carrying so that there are fewer pounds per square inch on the horse's back and, when properly fitted, few if any pressure points. Thus, the design, in spite of its weight, can be used for many hours with relatively little discomfort to

11050-450: The integrated spring steel and gullet plate, some without). Synthetic materials vary widely in quality. Polyurethane trees are often very well-made, but some cheap saddles are made with fiberglass trees of limited durability. Synthetic trees are often lighter, more durable, and easier to customize. Some designs are intended to be more flexible and move with the horse. Several companies offer flexible trees or adjustable gullets that allow

11180-535: The introduction of the HJ , heralding new front-panel styling and a revised rear fascia. This new bodywork was to remain, albeit with minor upgrades, through the HX and HZ series. Detuned engines adhering to government emission standards were brought in with the HX series, whilst the HZ brought considerably improved road handling and comfort with the introduction of radial-tuned suspension. As

11310-585: The larger Holden six-cylinder and V8 engines. Initially, the Commodore maintained Holden's sales leadership in Australia. However, some of the compromises resulting from the adoption of a design intended for another market hampered the car's acceptance. In particular, it was narrower than its predecessor and its Falcon rival, making it less comfortable for three rear-seat passengers. With the abandonment of left-hand drive markets, Holden exported almost 100,000 Commodores to markets such as New Zealand, Thailand, Hong Kong, Malaysia, Indonesia, Malta and Singapore. During

11440-570: The larger, more sophisticated Commodore. The closest successor to the Torana was the Camira , released in 1982 as Australia's version of GM's medium-sized " J-car ". The 1980s were challenging for Holden and the Australian automotive industry. The Australian Government tried to revive the industry with the Button car plan , which encouraged car makers to focus on producing fewer models at higher, more economical volumes, and to export cars. The decade opened with

11570-499: The life of the VL. The decision to opt for a Japanese-made transmission led to the closure of the Woodville, South Australia assembly plant. Emboldened by the apparent sign of turnaround, GM paid off Holden's mounted losses of A$ 780 million on 19 December 1986. At GM headquarters' request, Holden was then reorganised and recapitalised, separating the engine and car manufacturing divisions in

11700-647: The manufacture of Chevrolets and Pontiacs ended in 1968, coinciding with the year of Holden's next major new model, the HK . This included Holden's first V8 engine , a Chevrolet engine imported from Canada. Models based on the HK series included an extended-length prestige model, the Brougham ; and a two-door coupé , the Monaro . The mainstream Holden Special was rebranded the Kingswood , and

11830-450: The matter. The engine change was necessitated by the legal requirement that all new cars sold in Australia after 1986 had to consume unleaded petrol. Because it was unfeasible to convert the existing six-cylinder engine to run on unleaded fuel, the Nissan engine was chosen as the best engine available. However, changing currency exchange rates doubled the cost of the engine and transmission over

11960-577: The mid-1980s. In 1984, Holden introduced the VK Commodore , with significant styling changes from the previous VH . The Commodore was next updated in 1986 as the VL , which had new front and rear styling. Controversially, the VL was powered by the 3.0-litre Nissan RB30 six-cylinder engine and had a Nissan-built, electronically controlled four-speed automatic transmission. Holden even went to court in 1984 to stop local motoring magazine Wheels from reporting on

12090-452: The modern English and Western saddles. One variant of the English saddle was developed by François Robinchon de la Guérinière , a French riding master and author of "Ecole de Cavalerie" who made major contributions to what today is known as classical dressage . He put great emphasis on the proper development of a "three point" seat that is still used today by many dressage riders. In

12220-505: The modern stirrup, but the first dependable representation of a rider with paired stirrups was found in China in a Jin Dynasty tomb of about 302 AD. The stirrup appeared to be in widespread use across China by 477 AD, and later spread to Europe. This invention gave great support for the rider, and was essential in later warfare . Accounts of the cavalry system of the Mali Empire describe

12350-492: The needs of vaqueros and cowboys of Mexico, Texas and California , including the addition of a horn that allowed a lariat to be tied or dallied for the purpose of holding cattle and other livestock. In the Western world there are two basic types of saddles used today for horseback riding , usually called the English saddle and the "stock" saddle. The best known stock saddle is the American western saddle , followed by

12480-494: The new Falcon in Australia, only months after its introduction in the United States. To Holden's advantage, the Falcon was not durable, particularly in the front suspension, making it ill-suited for Australian conditions. In response to the Falcon, Holden introduced the facelifted EK series in 1961; the new model featured two-tone paintwork and optional Hydramatic automatic transmission. A restyled EJ series came in 1962, debuting

12610-469: The new luxury oriented Premier model. The EH update came a year later, bringing the new Red motor , providing better performance than the previous Grey motor . The HD series of 1965 had the introduction of the Powerglide automatic transmission. At the same time, an "X2" performance option with a more powerful version of the 179-cubic-inch (2.9 L) six-cylinder engine was made available. In 1966,

12740-409: The outcome of a A$ 600 million development programme that spanned more than five years. The new model featured a rounded exterior body shell, improved handling and many firsts for an Australian-built car. Also, a stronger body structure increased crash safety. The locally produced Buick-sourced V6 engine powered the Commodore range, as did the 5.0-litre Holden V8 engine, and was replaced in 1999 by

12870-486: The process. This involved the splitting of Holden into Holden's Motor Company (HMC) and Holden's Engine Company (HEC). For the most part, car bodies were now manufactured at Elizabeth, with engines as before, confined to the Fishermans Bend plant in Port Melbourne, Victoria. The engine manufacturing business was successful, building four-cylinder Family II engines for use in cars built overseas. The final phase of

13000-625: The production line's closure in 2016. Holden's ultimate survival, though, depended on continued negotiations with the Federal Government—to secure funding for the period from 2016 to 2022—and the final decision of the global headquarters in Detroit, US. Following an unsuccessful attempt to secure the extra funding required from the new Liberal/National coalition government, on 11 December 2013, General Motors announced that Holden would cease engine and vehicle manufacturing operations in Australia by

13130-505: The resettling to the new Holden headquarters on 191 Salmon Street, Port Melbourne, Victoria. Holden caused controversy in 2005 with their Holden Employee Pricing television advertisement, which ran from October to December 2005. The campaign publicised, "for the first time ever, all Australians can enjoy the financial benefit of Holden Employee Pricing". However, this did not include a discounted dealer delivery fee and savings on factory fitted options and accessories that employees received. At

13260-512: The rider's seat bones, reducing the pressure (force per unit area) on any one part of the horse's back, thus greatly increasing the comfort of the horse and prolonging its useful life. The invention of the solid saddle tree also allowed development of the true stirrup as it is known today. Without a solid tree, the rider's weight in the stirrups creates abnormal pressure points and makes the horse's back sore. Thermography studies on "treeless" and flexible tree saddle designs have found that there

13390-410: The rider, the saddle may need to be adjusted or replaced entirely to ensure proper fitment. Riding a saddle that doesn't properly secure and balance the rider can cause pain in the hips and back, as well as saddle sores under the bones that make contact with the saddle during riding. On horseback, a rider's pelvis may receive a saddle-horn injury due to falling onto the saddle after being bounced into

13520-521: The rise of Holden as a cultural icon, as the Holden car became synonymous with the 'Australian way of life', coming to symbolise the stability of post-war Australian capitalism. Holden's next model, the FE , launched in 1956, offered in a new station wagon body style dubbed "Station Sedan" in the company's sales literature. In the same year, Holden commenced exports to Malaya , Thailand, and North Borneo . Strong sales continued in Australia, and Holden achieved

13650-425: The saddle was built on an adjustable tree and consequently only one size was needed. Its advantage over the fixed tree 1902 pattern was its ability to maintain a better fit on the horse's back as the horse gained or lost weight. This saddle was made using traditional methods and featured a seat blocked from sole leather, which maintained its shape well. Military saddles were fitted with metal staples and dees to carry

13780-432: The same saddle to be used on different sizes of horses. Western saddles are saddles originally designed to be used on horses on working cattle ranches in the United States. Used today in a wide variety of western riding activities, they are the "cowboy saddles" familiar to movie viewers, rodeo fans, and those who have gone on tourist trail rides. The Western saddle has minimal padding of its own, and must be used with

13910-573: The same time, employees were given a further discount of 25 to 29 percent on selected models. Holden revived the Monaro coupe in 2001. Based on the Commodore VX architecture, the coupe attracted worldwide attention after being shown as a concept car at Australian auto shows. The VX Commodore received its first major update in 2002 with the VY series. A mildly facelifted VZ model launched in 2004, introducing

14040-418: The sedan models featured a new bumper and wraparound triangular taillights, while all other body styles kept the previous HQ's rear styling. Sedan and wagon also had revised rear quarter panels. The mainstream passenger car range consisted of 4-door sedan and 5-door wagon models in three trim levels. The Premier was distinguished from the cheaper models by a four headlight frontal treatment. Wagons rode on

14170-595: The shut-down of the Pagewood, New South Wales production plant and introduction of the light commercial Rodeo , sourced from Isuzu in Japan. The Rodeo was available in both two- and four-wheel drive chassis cab models with a choice of petrol and diesel powerplants. The range was updated in 1988 with the TF series, based on the Isuzu TF . Other cars sourced from Isuzu during the 1980s were

14300-677: The still independent Woodville plant built bodies for Austin, Chrysler , DeSoto , Morris , Hillman , Humber , Hupmobile , and Willys-Overland , as well as GM cars. The last of this line of business was the assembly of Hillman Minx sedans in 1948. The Great Depression led to a substantial downturn in production by Holden, from 34,000 units annually in 1930 to just 1,651 units one year later. In 1931, GM purchased HMBB and merged it with General Motors (Australia) Pty Ltd to form General Motors-Holden's Ltd (GM-H). Its acquisition of Holden allowed General Motors to inherit an Australian identity, which it used to cultivate nationalist appeal for

14430-499: The strong Australian dollar and the cost of reducing the workforce at the Elizabeth plant, including the loss of 1,400 jobs after the closure of the third-shift assembly line in 2005, after two years in operation. Holden fared better in 2007, posting an A$ 6 million loss. This was followed by an A$ 70.2 million loss in the 2008, an A$ 210.6 million loss in 2009, and a profit of A$ 112 million in 2010. On 18 May 2005, "Holden Ltd" became "GM Holden Ltd", coinciding with

14560-466: The time it was introduced, many considered the appearance dated. Much of the motoring industry at the time noted that the adopted style did not translate well to the more compact Holden. The FB became the first Holden that was adapted for left-hand drive markets, enhancing its export potential, and as such was exported to New Caledonia, New Hebrides , the Philippines, and Hawaii. In 1960, Ford unveiled

14690-410: The tree of an English saddle is built of laminated layers of high quality wood reinforced with spring steel along its length, with a riveted gullet plate. These trees are semi-adjustable and are considered "spring trees". They have some give, but a minimum amount of flexibility. More recently, saddle manufacturers are using various materials to replace wood and create a synthetic molded tree (some with

14820-457: The use of stirrups and saddles in the cavalry. Stirrups and saddles brought about innovation in new tactics, such as mass charges with thrusting spears and swords. Saddles were improved upon during the Middle Ages , as knights needed saddles that were stronger and offered more support. The resulting saddle had a higher cantle and pommel (to prevent the rider from being unseated in warfare) and

14950-528: The weather. Early samurai warfare was conducted primarily on horseback and the kura provided a rugged, stable, comfortable platform for shooting arrows, but it was not well suited for speed or distance. In the Edo period horses were no longer needed for warfare and Japanese saddles became quite elaborate and were decorated with mother of pearl inlays, gold leaf, and designs in colored lacquer. A saddle, regardless of type, must fit both horse and rider. Saddle fitting

15080-428: Was also produced from 1946 to 1948. From here, Holden continued to pursue the goal of producing an Australian car. This involved compromise with GM, as Holden's managing director, Laurence Hartnett , favoured development of a local design, while GM preferred to see an American design as the basis for "Australia's Own Car". In the end, the design was based on a previously rejected postwar Chevrolet proposal. The Holden

15210-549: Was an Australian subsidiary company of General Motors . Founded in Adelaide, South Australia , it was an automobile manufacturer , importer, and exporter that sold cars under its own marque in Australia. In its last three years, it switched entirely to importing cars. It was headquartered in Port Melbourne , with major industrial operations in the states of South Australia and Victoria . The 164-year-old company ceased trading at

15340-522: Was based on the Commodore. The VN Commodore received a major facelift in 1993 with the VR —compared to the VN, approximately 80 percent of the car model was new. Exterior changes resulted in a smoother overall body and a "twin-kidney" grille—a Commodore styling trait that remained until the 2002 VY model and, as of 2013, remains a permanent staple on HSV variants. Holden introduced the all-new VT Commodore in 1997,

15470-487: Was based on the Holden developed GM Zeta platform , that was earmarked to become a "Global RWD Architecture", until plans were cancelled due to the 2007/08 global financial crisis . Throughout the 1990s, Opel had also been the source of many Holden models. To increase profitability, Holden looked to the South Korean Daewoo brand for replacements after acquiring a 44.6 percent stake—worth US$ 251 million—in

15600-593: Was built on a wooden tree that supported more weight from a rider with armor and weapons. This saddle, a predecessor to the modern Western saddle , was originally padded with wool or horsehair and covered in leather or textiles. It was later modified for cattle tending and bullfighting in addition to the continual development for use in war. Other saddles, derived from earlier, treeless designs, sometimes added solid trees to support stirrups, but were kept light for use by messengers and for horse racing . The saddle eventually branched off into different designs that became

15730-678: Was exporting cars to Africa, the Middle East, Southeast Asia, the Pacific Islands, and the Caribbean. Holden began assembling the compact HA series Vauxhall Viva in 1964. This was superseded by the Holden Torana in 1967, a development of the Viva ending Vauxhall production in Australia. Holden offered the LC, a Torana with new styling, in 1969 with the availability of Holden's six-cylinder engine. In

15860-588: Was founded in 1856 as a saddlery manufacturer in South Australia before moving into the automotive field in 1898. It became a subsidiary of the United States–based General Motors (GM) in 1931, when the company was renamed General Motors-Holden's Ltd . It was renamed Holden Ltd in 1998 and adopted the name GM Holden Ltd in 2005. Holden briefly owned assembly plants in New Zealand during

15990-417: Was launched in 1948, creating long waiting lists extending through 1949 and beyond. The name "Holden" was chosen in honour of Sir Edward Holden, the company's first chairman and grandson of J. A. Holden. Other names considered were "GeM", "Austral", "Melba", "Woomerah", "Boomerang", "Emu", and "Canbra", a phonetic spelling of Canberra . Although officially designated " 48-215 ", the car was marketed simply as

16120-408: Was more than Holden's capital investment of the same period. From 2004, Holden was only able to make a profit in 2010 and 2011. Industry Minister Kim Carr confirmed on 10 July 2013 that talks had been scheduled between the Australian government and Holden. On 13 August 2013, 1,700 employees at the Elizabeth plant in South Australia voted to accept a three-year wage freeze to decrease the chances of

16250-568: Was no longer offered in any Holden model. Commercial vehicle derivatives included coupe utility , panel van and cab chassis truck models: There were two special vehicle packages available based upon various commercial vehicles: The base utility and panel van models did not carry the Belmont name which had been applied to their HQ series equivalents, and they were marketed simply as the Holden utility and Holden panel van respectively, while The Sandman variants were equipped with various features from

16380-405: Was not marketed as a "Holden", but rather a "Statesman". The HQ framework led to a new generation of two-door Monaros, and despite the introduction of the similar-sized competitors, the HQ range became the top-selling Holden of all time, with 485,650 units sold in three years; 14,558 units were exported and 72,290 CKD kits were constructed. The HQ series was facelifted in 1974 with

16510-490: Was opened on 5 November 1936 by Prime Minister Joseph Lyons , with construction beginning in 1939 on a new plant in Pagewood , New South Wales . However, World War II delayed car production with efforts shifted to the construction of vehicle bodies, field guns, aircraft, and engines. Before the war ended, the Australian government took steps to encourage an Australian automotive industry. Both GM and Ford provided studies to

16640-604: Was powered by a 1.6-litre four-cylinder engine. Fast becoming a popular car, the Gemini rapidly attained sales leadership in its class, and the nameplate lived on until 1987. Holden's most popular car to date, the Commodore, was introduced in 1978 as the VB . The new family car was loosely based on the Opel Rekord E body shell, but with the front from the Opel Senator grafted to accommodate

16770-499: Was shortened to "Holden Ltd". On 26 April 1990, GM's New Zealand subsidiary Holden New Zealand announced that production at the assembly plant based in Trentham would be phased out and vehicles would be imported duty-free—this came after the 1984 closure of the Petone assembly line due to low output volumes. During the 1990s, Holden, other Australian automakers and trade unions pressured

16900-501: Was thoroughly re-engineered, featuring a perimeter frame and semi-monocoque (unibody) construction. Other firsts included an all-coil suspension and an extended wheelbase for station wagons, while the utilities and panel vans retained the traditional coil/leaf suspension configuration. The series included the new prestige Statesman brand, which also had a longer wheelbase, replacing the Brougham. The Statesman remains noteworthy because it

#0