The Ford Crestline is an automobile which was produced by Ford in the United States for models years 1952 to 1954.
53-471: The Crestline was introduced as the top trim level of the 1952 Ford range, above the intermediate-level Customline and base level Mainline . It was offered in Victoria, Sunliner and Country Squire versions with 2-door hardtop , 2-door convertible and 4-door station wagon body styles respectively. Crestlines were offered only with a 239 cu in (3,920 cm) "flathead" V8 engine . The Crestline
106-426: A longitudinal engine layout and rear-wheel drive (or all-wheel drive). However, V8 engines have also occasionally been used in transverse engine front-wheel drive vehicles, sometimes using closer cylinder bore spacings and narrower cylinder bank angles to reduce their space requirements. The classification of 'big-block' or 'small-block' refers to the engine's external dimensions and does not necessarily indicate
159-539: A 2.5 L (153 cu in) V8 engine. BMW's first V8 engine was the 1954–1965 BMW OHV V8 engine , a petrol engine with overhead valves and all-aluminum construction. The company resumed production of V8 engines in 1992 with the BMW M60 aluminum double overhead camshaft engine, and V8 engines have remained in production until today. BMW's first turbocharged V8 engine was the 1998–2009 M67 twin-turbocharged diesel engine. The first turbocharged V8 petrol engine from BMW
212-413: A 239 cubic inch overhead valve Y-block unit, marking the end of an era. This engine produced 130 hp (97 kW) with a two-barrel carburetor . An impressive 160 hp (119 kW) 256 CI version with a Holley four-barrel was available in the official-use-only law enforcement model. The six-cylinder was up to 223 cu in (3.7 L) and now produced 115 hp. Another new addition
265-521: A 5.6 L (340 cu in) Chrysler LA engine and built on the chassis of a 1950s Chrysler Imperial. The 1934–1938 Tatra 77 rear-engined sedan was initially powered by 3.0 L (183 cu in) petrol V8, which was air-cooled and used an overhead camshaft that operated the valves using a 'walking beam' rocker arrangement. This model line continued until 1999 when the Tatra 700 ended production. Tatra also produced diesel V8 truck engines from
318-545: A 60-degree V-angle, since it was derived from the 60 degree V12 Rolls-Royce Meteor which in turn was based on the Rolls-Royce Merlin V12 engine . Other V-angles have been used occasionally. The Lancia Trikappa , Lancia Dilambda , and Lancia Astura , produced 1922–1939, used narrow angle V8 engines (based on the Lancia V4 engine ) with V-angles of 14–24 degrees. The 1932 Miller four-wheel drive racing cars used
371-565: A V-angle of 90 degrees and was built in displacements of 4.1 L (253 cu in) and 5.0 L (308 cu in), the latter being de-stroked to 5.0 L (304 cu in) in 1985. The Holden V8 engine was used in various models, including the Kingswood, Monaro, Torana, Commodore, and Statesman. Versions tuned for higher performance were sold by Holden Dealer Team and Holden Special Vehicles , including versions stroked to up to 5.7 L (350 cu in). The Holden V8 engine
424-579: A V8 engine was the 1965 Chrysler Valiant (AP6) , which was available with an American-built 4.5 L (273 cu in) Chrysler engine. The first locally designed V8 Ford was the 1966 Ford Falcon (XR) and the first V8 Holden was the 1968 Holden HK , both using engines supplied by their parent companies in the United States. The first V8 engine to be mass-produced in Australia was the 1969–2000 Holden V8 engine . This cast-iron overhead valve engine used
477-460: A V8 engine was the 1988 Audi V8 luxury sedan. Its first model to use a V8 diesel engine was the D2 A8 3.3 TDI in 2000. The first V8-engined Alfa Romeo road car was the 1967–1969 Alfa Romeo 33 Stradale mid-engined sports car, of which 18 were produced. This was followed by the 1970–1977 Alfa Romeo Montreal front-engined sports car. The engines for both cars are based on the 90-degree V8 engine from
530-406: A V8 engine with a V-angle of 45 degrees. The 8-cylinder versions of the 1945 through 1966 EMD 567 diesel locomotive engine also used a V-angle of 45 degrees. Most V8 engines fitted to road cars use a cross-plane crankshaft since this configuration produces less vibration due to the perfect primary balance and secondary balance. The cross-plane crankshaft has the four crank pins (numbered from
583-514: A common crankshaft and are arranged in a V configuration . The first known V8 was the Antoinette , designed by Léon Levavasseur , and built in 1904 by the French Antoinette company for use in speedboat racing, cars, and later, airplanes. Also in 1904, V8 engines began small-scale production by Renault and Buchet for use in race cars. Most engines use a V-angle (the angle between
SECTION 10
#1733085406869636-457: A mix of imported and local parts. A 4.4 L (269 cu in) version of the Rover V8 engine was produced in Australia for the ill-fated 1973–1975 Leyland P76 sedan. The engine had an overhead valve design and was the only all-aluminum engine made in Australia. The 1958–1965 Hongqi CA72 was a luxury car, of which approximately 200 were built for government officials. It was powered by
689-473: A single overhead camshaft and was rear-mounted in the vehicles. The company's first V8 road car was the 1973–1974 Dino 308 GT4 mid-engined sports car. The engine is a 90-degree all-aluminum V8 with double overhead camshafts. In 1975, the 2.0 L (122 cu in) engine in the Ferrari 208 GT4 became the smallest production V8 engine ever produced. The model lineage of mid-engined V8 road cars continues to
742-641: A strict ruleset to follow until the 1972 season, when engines were no longer allowed to be any bigger than 358 cu in (5.9 L) for the purpose of reducing speeds caused by the rapid aerodynamic advancements from 1969 to 1971. In the American Top Fuel class of drag racing, V8 engines displacing 500 cu in (8 L) today produce outputs of over 7,000 kW (10,000 hp). and 10,000 N⋅m (7,400 lb⋅ft). The engines used in Top Fuel and Funny car drag racing are typically based on
795-409: Is considered to be the first V8 engine produced in significant quantities. The 1914 Cadillac L-head V8 engine is considered the first road-going V8 engine to be mass-produced in significant quantities, with 13,000 sold the first year. This engine was built in the United States and was greatly assisted by Cadillac's pioneering use of electric starter motors . The popularity of V8 engines in cars
848-440: The 1962 , 1963 , 1964 , and 1965 seasons were won by drivers of V8-powered cars. From 1962 through 1965, the top three manufacturers in each season's Constructor's Championship all predominantly used V8 engines in their cars. In 1966, the engine capacity limits were increased to 3.0 L (183 cu in) (or 1.5 litres with a supercharger), and both the 1966 and 1967 Constructor's Championships were won by cars powered by
901-547: The Alfa Romeo Tipo 33 racing car, and have double overhead camshafts and a dry sump. The 33 Stradale engine has a displacement of 2.00 L (122 cu in) and a flat-plane crankshaft, while the Montreal uses an engine enlarged to 2.6 L (160 cu in) and uses a cross-plane crankshaft. The 2007–2010 Alfa Romeo 8C Competizione / Spider sports cars are powered by a 4.7 L (290 cu in) version of
954-612: The Australian Ford Falcon and Ford Fairlane models. It was also used in several low-volume DeTomaso sports cars and luxury sedans built in Italy. Australian production ceased in 1982 when Ford Australia temporarily stopped production of V8 cars. From 1991 until 2016, the Ford Falcon was available with the imported Ford Windsor , Ford Barra , or Ford Modular V8 engines; the latter was marketed as "Boss" and locally assembled from
1007-738: The Brabham-Repco V8 engine . From 1968 until 1981, the Cosworth DFV V8 engine dominated Formula One racing. During this time, the Manufacturers' Championship was won by Cosworth DFV-powered cars every season except 1975, 1976, 1977, and 1979, which 12-cylinder Ferraris won. After a long period of dominance, the Cosworth DFV was eventually outpaced by turbocharged straight-four and V6 engines. The next period of significant V8 usage in Formula One
1060-556: The Ferrari F136 engine with a cross-plane crankshaft. Ferrari's first contact with V8 engines was the Vittorio Jano -designed 1955 Lancia-Ferrari D50 , a Formula One racing car that the company acquired as part of its purchase of Lancia's Formula One racing department. The first Ferrari-developed V8 engines were used in the 1962 Ferrari 248 SP and Ferrari 268 SP sports prototype racing cars designed by Carlo Chiti . This engine had
1113-643: The Hewitt Touring Car became the first car built in the United States with a V8 engine. The engine was designed and built by Edward R. Hewitt who emphasized the V8's superiority to the typical I4 and I6 and six-cylinder engines of the time because of its lower weight and easier to make crankshaft compared to the I6s of equal power as well as the V8 not taking much more space than a I4. The 1910 De Dion-Bouton — built in France—
SECTION 20
#17330854068691166-526: The 1915 Cadillac engine. A flat-plane crankshaft is used by many V8 engines fitted to racing cars. From the gas dynamics aspect, the flat-plane crankshaft allows for even exhaust gas pulses to be achieved with a simple exhaust system. The design was popularized in motor racing by the 1961–1965 Coventry Climax FWMV Formula One engine, and the 1967–1985 Cosworth DFV engine was highly successful in Formula One. Several production sports cars have used flat-plane V8 engines, such as every Ferrari V8 model (from
1219-653: The 1939 Tatra 81 to the present day Tatra 815 . French manufacturers were pioneering in their use of V8 engines in the early 1900s with the 1904 Antoinette aircraft engine (the first known V8 engine) and the 1910 De Dion-Bouton . However, there were few French automotive V8 engines in the following decades, with manufacturers such as Delage , Delahaye , Talbot-Lago , Bugatti , and Hotchkiss using six-cylinder or straight-eight engines instead. From 1935 until 1954, Matford (Ford's French subsidiary, later renamed to ' Ford SAF ') produced cars with V8 engines, closely based on contemporary American Ford models. Simca purchased
1272-466: The 1954 model year, with an updated design offered in 1955 . The model lines were again reshuffled, with the base model now called " Mainline " and mid-level called " Customline ". The top " Crestline " included the "Sunliner" convertible , and the "Victoria" hardtop , a tradition going back to 1932 with the Ford Victoria 2-door coupe. The station wagon continued with the "Country Squire". Inside
1325-678: The 1973 Ferrari 308 GT4 to the 2019–present Ferrari F8 Tributo ), the Lotus Esprit V8 , the Porsche 918 Spyder , and the McLaren MP4-12C . The first V8 engine used in a road-going car was the 1905 Rolls-Royce built in the United Kingdom. This model was initially equipped with a 3.5 L (214 cu in) V8 engine. However, only three cars were made before Rolls-Royce reverted to using straight-six engines for their cars. In 1907,
1378-475: The 2019–present Ferrari F8 Tributo . Five-valve-per-cylinder versions were used from 1994 until 2005 in the Ferrari F355 and Ferrari 360 . Turbocharging was introduced on the 1984–1987 Ferrari 288 GTO flagship car, and the range of entry-level mid-engined sports cars switched to turbocharging with the 2015 Ferrari 488 . The Formula One team resumed using V8 engines for the 2006–2013 seasons, beginning with
1431-500: The 8.2 L (500 cu in) V8 engine used in the 1971–1978 Cadillac Eldorado and BMW's 3.0 L (183 cu in) M60B30 V8 engine found in cars such as the BMW E34 530i. V8 engines intended for motorsport are often small and short-stroke to maximize RPMs and thus power. The Cosworth DFV 3.0 L (183 cu in) is such an engine. Due to its large external dimensions, V8 engines are typically used in cars that use
1484-561: The Ford SAF in 1954 and continued to produce various models powered by the Ford Flathead V8 until 1969. After WW2, France imposed very steep tax horsepower charges - the owners of cars with engines above 2 L were financially penalized, so France had a small domestic market for larger-engined cars, such as the V8. Despite this, Facel Vega produced luxury and sports cars powered by Chrysler V8 engines from 1954 through 1964. One of
1537-466: The United States, but received some visual alterations mostly consisting of additional chrome. The bumpers were deeper, wraparound units, while the taillights were redesigned, a full-length chrome strip was fitted along the side, and an airplane-shaped bonnet ornament was fitted. The interior was now available in either Vynex or leather. V8 engine A V8 engine is an eight- cylinder piston engine in which two banks of four cylinders share
1590-402: The actual engine displacement. Engines with displacements from 6.0 to 6.6 L (366 to 403 cu in) have been classified as both small-block and big-block, depending on the particular manufacturer's range of engines. V8 engines have been used in many forms of motorsport, from Formula One , IndyCar , NASCAR , DTM and V8 Supercars circuit racing, to Top Fuel drag racing. Among
1643-511: The aluminium-conversion Chrysler 426 Hemi engine and run on highly explosive nitromethane fuel. The world's fastest non-jet-powered (i.e., piston-engine powered) wheeled land vehicle, the Speed Demon, which achieved a speed of 744.072 km/h (462.345 mph) in 2017, is powered by a V8 engine based on the Chevrolet small-block engine design. The first Australian-designed car to use
Ford Crestline - Misplaced Pages Continue
1696-463: The corner markers were plain rectangular lights rather than the circular "intakes". All 1953 Fords featured commemorative steering wheels marking the company's 50th anniversary. Mechanical changes included two-inch wider tread, and a k-bar frame with five cross-members. William Clay Ford paced the Indianapolis 500 in a Sunliner convertible with a dummy Continental tire kit (Coronado kit). This
1749-411: The crankshaft can be machined from a flat billet and does not require counterweights so it is lighter. However, it produces more vibration due to a secondary imbalance. Most early V8 road car engines also used a flat-plane crankshaft since this was simpler to design and build than a cross-plane crankshaft. Early flat-plane V8 engines included the 1910 De Dion-Bouton engine, the 1915 Peerless engine, and
1802-456: The first German V8 engines was the 1928–1945 Argus As 10 aircraft engine. This engine was air-cooled, used an 'inverted V' design, and was used in several training, surveillance, and communications airplanes. From 1933 until 1940, the Horch 830 luxury cars were powered by V8 engines (sold alongside Horch's larger straight-eight engines). Shortly after, the 1934–1937 Stoewer Greif V8 was powered by
1855-399: The first V8 Formula One cars to compete were the 1952 AFM entry and the 1954 Lancia D50 , with a development of the latter powering Juan Manuel Fangio's 1956 car to victory in the driver's championship. The 1.5 L Formula One era of 1961–1965 included V8 engines from Ferrari, Coventry Climax, British Racing Motors (BRM), and Automobili Turismo e Sport (ATS). The driver's championships for
1908-523: The front) at angles of 0, 90, 270, and 180 degrees, which results in a cross shape for the crankshaft when it is viewed from one end. The rumbling exhaust sound produced by a typical cross-plane V8 engine is partly due to the uneven firing order within each of the two banks of four cylinders. A usual firing order of L-R-L-L-R-L-R-R (or R-L-R-R-L-R-L-L) results in uneven intake and exhaust pulse spacing for each bank. When separate exhaust systems are used for each bank of cylinders, this uneven pulsing results in
1961-594: The most expensive Ford. The 1952 Ford was also produced by Ford Australia from October 1952 to 1955. A four-door sedan was offered as the V8 Customline and a two-door coupe utility was marketed as the V8 Mainline Utility . Along with the general improvements for all 1952 Fords, the Australian-assembled model also got increased ground clearance to better cope with Australian road conditions. The Utility
2014-510: The roof. 13,144 were sold in the single year of production, more than the two years of Crown Victoria Skyliner production that would follow. New 223 cu in (3,650 cm) straight-six and 239 cu in (3,920 cm) overhead valve V8 engines were offered. The Crestline was replaced by the Ford Fairlane in the 1955 Ford range. 1952 Ford 239 CID (3.9 L) Flathead V8 The Ford line of cars
2067-679: The rumbling sound typically associated with V8 engines. However, racing engines seek to avoid these uneven exhaust pressure pulses to maximize the power output. The 1960s cross-plane V8 racing engines used long primary exhaust pipes (such as the Ford GT40 endurance racing car) or located the exhaust ports on the inside of the V-angle (such as the Lotus 38 IndyCar) to link the exhaust systems from each bank and provide even exhaust gas pulses),. A flat-plane crankshaft configuration provides two benefits. Mechanically,
2120-421: The two banks of cylinders) of 90 degrees. This angle results in good engine balance , which results in low vibrations. However, the downside is the greater width of the engine compared to those that use a smaller V-angle. V8 engines with a 60-degree V-angle were used in the 1996–1999 Ford Taurus SHO , the 2005–2011 Volvo XC90 , and the 2006–2009 Volvo S80 . The Ford engine used a 60-degree V-angle because it
2173-482: Was 115 in (2,921 mm). In these years, an overdrive transmission option was available and they didn't have a voltmeter but had an ampmeter. 1953 was Ford's 50th anniversary. The big news for 1953 was the availability of power-assisted brakes and steering, which had previously been limited to the Mercury and Lincoln lines. The center grill bullet lost its ring and was now flanked by vertical black stripes, while
Ford Crestline - Misplaced Pages Continue
2226-407: Was a "flight-style" control panel and new pedals suspended from below the dashboard. A voltmeter, gas gauge, temp. gauge, and oil pressure were standard. The clock and radio were in the center of the dash. The grille sported a single center "bullet" surrounded by a chrome ring as well as "jet intake" corner markers. New trunk hinges were used that would not crush the contents of the trunk. Wheelbase
2279-501: Was again refreshed for 1952 , although remaining similar to the all-new 1949 Fords . This time, curved one-piece windshield glass joined a new "Mileage Maker" straight-6 engine with 101 hp. The 226 CID (3.7 L) L-head straight-6 was replaced by an overhead valve 215 CID (3.5 L) Mileage Maker with 101 hp (75 kW), while the old 239 CID (3.9 L) Flathead V8 remained with 110 hp (82 kW). This design would continue through
2332-475: Was also the last year for real wood trim on the Country Squire wagon. Toward the end of the year, Ford added "Master-Guide" power steering as an option on cars with V8s. Full instrumentation was still used. An unusual service provided by Ford was that the radio preset buttons would already be set to local stations by the dealer. The heater was $ 74. The long-lived flathead V8 engine was replaced for 1954 by
2385-657: Was also used in touring car racing and formed the basis of the Repco-Holden engine used in Formula 5000 racing. In 1999, the Holden V8 engine began to be replaced by the imported General Motors LS1 V8 engine. In 1971, Ford Australia began local production of the Ford 'Cleveland' V8 , an overhead valve cast-iron engine. The engine was produced in displacements of 4.9 L (302 cu in) and 5.8 L (351 cu in) for use in
2438-541: Was based on a V6 engine with a 60-degree V-angle. Both the Ford and Volvo engines were used in transverse engine chassis, which were designed for a front-wheel-drive layout (with an on-demand all-wheel drive system in the case of the Volvos ). To reduce the vibrations caused by the unbalanced 60-degree V-angle, the Volvo engines used a balance shaft and offset split crankpins . The Rolls-Royce Meteorite tank engine also used
2491-565: Was developed by Ford Australia using the chassis of the US Ford two-door convertible. Both models were updated in 1953 and 1954 along the lines of the US Fords and were powered by a 110 hp (82 kW) iteration of the 3.9 litre Flathead V8 which went into Australian production in 1952. The Australian 1954s (arriving in June 1954) retained the flathead V8 rather than the new overhead-valve unit used in
2544-559: Was first used on the Mercedes-Benz M113 engine in 2002 and turbocharging was first used on non-commercial diesel V8 engines in 1999 with the OM628 and on petrol engines with the M278 engine in 2010. Porsche's first road car to use a V8 engine was the 1978 Porsche 928 coupe. Its first to use a V8 diesel engine was the second-generation Cayenne S Diesel in 2014. Audi's first road car to use
2597-496: Was from 2006 to 2013 , when the rules mandated use of 2.4 L (146 cu in) naturally-aspirated V8 engines, with regular power outputs between 730 and 810 hp (in order to reduce the power outputs being achieved by the previous 3.0 litre V10 engines). These were replaced by 1.6 litre turbocharged V6 engines for the 2014 and later seasons. V8 engines have dominated American premier stock car racing NASCAR series since its inaugural 1949 season . However, there wasn't
2650-466: Was significantly increased following the 1932 introduction of the Ford Flathead V8 . By the early 21st century, the use of V8 engines in passenger vehicles declined as automobile manufacturers opted for more fuel efficient , lower capacity engines, or hybrid and electric drivetrains . The displacement of modern V8 engines is typically from 3.5 to 6.4 L (214 to 391 cu in). However, larger and smaller examples have been produced, such as
2703-434: Was the " Crestline Skyliner " two-door hardtop , which featured an acrylic glass panel over the front half of the roof. Also added was the new "Astra-Dial Control Panel" speedometer, which has a clear, plastic covering on the top, which let sunlight illuminate it in the day-time. New power accessories included a four-way power front seat. The "woody" Country Squire wagon now used artificial fiberglass panels but remained
SECTION 50
#17330854068692756-488: Was the 2008–present BMW N63 engine. Their first eight-cylinder engine since passenger car and motorsport straight-eight engine production stopped in 1944 and 1955 respectively, Mercedes-Benz began production of the Mercedes-Benz M100 petrol V8 engine in 1963 and has continued production of V8 engines to the present day. The M100 had a single overhead camshaft, a cast-iron block, and an aluminium head. Supercharging
2809-511: Was updated with minor styling and trim changes for 1953. It retained its position as the top trim level in the Ford range while body styles and engine availability also remained unchanged. For 1954 the Crestline was again updated with minor styling and trim changes. Fordor Sedan and Skyliner versions were added, the latter being a 2-door hardtop with a tinted acrylic glass panel in the front section of
#868131