An elevator test tower is a structure usually 100 to over 200 metres (300 feet to over 600 feet) tall that is designed to evaluate the stress and fatigue limits of specific elevator cars in a controlled environment. Tests are also carried out in the test tower to ensure reliability and safety in current elevator designs and address any failures that may arise.
20-716: The National Lift Tower (previously called the Express Lift Tower ) is a lift-testing tower built by the Express Lift Company (a lifts division of the General Electric Company ) off Weedon Road in Northampton , England. The structure was commissioned in 1978 with construction commencing in 1980 and was officially opened by Queen Elizabeth II on 12 November 1982. It has been a Grade II Listed Building since 1997. The tower can be viewed from Arbury Hill ,
40-529: A travel of 100 metres (328 ft 1 in) and a theoretical maximum speed of 10 m/s (33 ft/s). The tower's renovation was officially completed in July 2010. Further building work was planned with planning permission being sought to build a visitor's centre incorporating a 100-seater auditorium and cafe. However, permission for this structure was denied by Northampton Borough Council in March 2012. Abseiling at
60-432: A travel of 100 metres (328 ft 1 in) and a theoretical maximum speed of 10 m/s (33 ft/s). The tower's renovation was officially completed in July 2010. Further building work was planned with planning permission being sought to build a visitor's centre incorporating a 100-seater auditorium and cafe. However, permission for this structure was denied by Northampton Borough Council in March 2012. Abseiling at
80-432: The Express Lift Tower ) is a lift-testing tower built by the Express Lift Company (a lifts division of the General Electric Company ) off Weedon Road in Northampton , England. The structure was commissioned in 1978 with construction commencing in 1980 and was officially opened by Queen Elizabeth II on 12 November 1982. It has been a Grade II Listed Building since 1997. The tower can be viewed from Arbury Hill ,
100-901: The National Lift Tower in Northampton , England ; the Solae Tower in Inazawa , Japan ; and the TK Elevator Test Tower in Rottweil , Germany (owned by ThyssenKrupp ). In 1888, Otis completed an elevator test tower at their factory in Yonkers, New York ; this was possibly the first elevator test tower in the United States . This engineering-related article is a stub . You can help Misplaced Pages by expanding it . National Lift Tower The National Lift Tower (previously called
120-440: The abbey. A cemetery of c. 300 burials was excavated during winter 2000–2001. The bones were analyzed to determine the health and burial practices in the late-medieval population of Northampton. Designed by architect Maurice Walton of Stimpson Walton Bond, the tower is 127.5 metres (418 ft 4 in) tall, 14.6 m (47 ft 11 in) in diameter at the base and tapers to 8.5 m (27 ft 11 in) at
140-439: The abbey. A cemetery of c. 300 burials was excavated during winter 2000–2001. The bones were analyzed to determine the health and burial practices in the late-medieval population of Northampton. Designed by architect Maurice Walton of Stimpson Walton Bond, the tower is 127.5 metres (418 ft 4 in) tall, 14.6 m (47 ft 11 in) in diameter at the base and tapers to 8.5 m (27 ft 11 in) at
160-549: The highest point in Northamptonshire . The tower is in St James End , west of Northampton town centre. The area is named after Northampton Abbey , an Augustinian monastery dedicated to St James, which was founded in 1104–1105. When the former Express Lift factory, which included the lift-testing tower, was redeveloped for housing in 1999–2000, excavations were carried out to determine the location and remains of any parts of
180-436: The highest point in Northamptonshire . The tower is in St James End , west of Northampton town centre. The area is named after Northampton Abbey , an Augustinian monastery dedicated to St James, which was founded in 1104–1105. When the former Express Lift factory, which included the lift-testing tower, was redeveloped for housing in 1999–2000, excavations were carried out to determine the location and remains of any parts of
200-402: The lift cars (frame) into free fall conditions with rated mass at tripping speeds as required by the designers of the safety gear to ensure the lift cars decelerated and stopped within the requirements of the standard. Buffer testing involved impacting them with the maximum and minimum mass at tripping speeds to ensure decelerations were within that requirement by the standard in both cases the aim
220-402: The lift cars (frame) into free fall conditions with rated mass at tripping speeds as required by the designers of the safety gear to ensure the lift cars decelerated and stopped within the requirements of the standard. Buffer testing involved impacting them with the maximum and minimum mass at tripping speeds to ensure decelerations were within that requirement by the standard in both cases the aim
SECTION 10
#1733093111394240-560: The top. The only lift-testing tower in Britain, and one of only two in Europe, it was granted Grade II listed building status on 30 October 1997, making it the youngest listed building in the UK at the time. The building's small, obround shaped windows were a design motif of the Express Lift Company, whose lift control panels featured control buttons and floor indicators of the same shape. In January 1997,
260-416: The top. The only lift-testing tower in Britain, and one of only two in Europe, it was granted Grade II listed building status on 30 October 1997, making it the youngest listed building in the UK at the time. The building's small, obround shaped windows were a design motif of the Express Lift Company, whose lift control panels featured control buttons and floor indicators of the same shape. In January 1997,
280-621: The tower fell out of use after Express was taken over by Otis (who typically used its test facilities in the United States). In 1999, the tower and surrounding land was sold to Wilcon Homes for development. From the time it was built, one shaft was specifically used by the British Standards Institution (BSI) for type testing of lift safety components at the time under the BS 5655 and BS EN81 standards. Safety Gear testing involved putting
300-449: The tower fell out of use after Express was taken over by Otis (who typically used its test facilities in the United States). In 1999, the tower and surrounding land was sold to Wilcon Homes for development. From the time it was built, one shaft was specifically used by the British Standards Institution (BSI) for type testing of lift safety components at the time under the BS 5655 and BS EN81 standards. Safety Gear testing involved putting
320-554: The tower has been going on since May 2011 with over £140,000 having been raised for charity in the period to May 2012. Northampton Borough Council has now granted approval for it to be used up to 24 times a year for abseiling. As of 2015, the tower was being used as the world's tallest drainage-testing facility. The tower once housed a transmitter on the top of it, for broadcasting community radio station Revolution Radio on FM 96.1 MHz, which launched on 12 June 2021. Elevator test tower Examples of an elevator test tower are
340-471: Was re-opened for business in October 2009. The tower is used by lift companies for research, development, testing and marketing. As well as being a resource for the lift industry, the building is also available to companies requiring tall vertical spaces, for example companies wishing to test working-at-height safety devices. There are six lift shafts of varying heights and speeds, including a high-speed shaft with
360-421: Was re-opened for business in October 2009. The tower is used by lift companies for research, development, testing and marketing. As well as being a resource for the lift industry, the building is also available to companies requiring tall vertical spaces, for example companies wishing to test working-at-height safety devices. There are six lift shafts of varying heights and speeds, including a high-speed shaft with
380-466: Was to ensure if the lift ever went into free fall or uncontrolled downward movement the safety components stopped the lift without causing any serious injury to the occupant. BSI ceased using the test tower soon after the site was acquired for housing in 1997–1998. The building is now privately owned and has been renamed the National Lift Tower. Following extensive renovation and repairs, the tower
400-404: Was to ensure if the lift ever went into free fall or uncontrolled downward movement the safety components stopped the lift without causing any serious injury to the occupant. BSI ceased using the test tower soon after the site was acquired for housing in 1997–1998. The building is now privately owned and has been renamed the National Lift Tower. Following extensive renovation and repairs, the tower
#393606