The Engineering Heritage Awards , formally known as the Engineering Heritage Hallmark Scheme , were established by the Institution of Mechanical Engineers (IMechE) in 1984 to identify and promote artefacts, locations, collections and landmarks of significant engineering importance.
159-555: In 1984, IMechE launched its Engineering Heritage Hallmark Scheme. For an object or artefact etc. to be considered for an award, an IMechE member would be required to complete a nomination form and submit it to the Institution. Upon submission, two referees would be appointed, one nominated by the Regional Committee where the object is located and a second independent referee. The submissions from both referees would then be reviewed by
318-465: A locomotive works at Forth Street, Newcastle, from which the following year the S&;DR ordered two steam locomotives and two stationary engines. On 16 September 1825, with the stationary engines in place, the first locomotive, Locomotion No. 1 , left the works, and the following day it was advertised that the railway would open on 27 September 1825. The cost of building the railway had greatly exceeded
477-629: A bill on 30 September 1820, the route having changed again as agreement had not been reached with Viscount Barrington about the line passing over his land. The railway was unopposed this time, but the bill nearly failed to enter the committee stage as the required four-fifths of shares had not been sold. Pease subscribed £7,000; from that time he had considerable influence over the railway and it became known as "the Quaker line". The Stockton and Darlington Railway Act 1821 ( 1 & 2 Geo. 4 . c. xliv), which received royal assent on 19 April 1821, allowed for
636-446: A branch from Nunthorpe to Battersby opened on 1 June 1864; passengers were carried from 1 April 1868. A branch from Barnard Castle to Middleton-in-Teesdale opened on 12 May 1868. The locomotive works at Darlington operated independently under Bouch until 1875, the locomotives having been renumbered by the NER a few years earlier. A variety of locomotives were used, the most common type were
795-488: A branch to a mine at Skelton. This Stockton and Darlington Railway Amalgamation Act 1858 ( 21 & 22 Vict. c. cxvi) also authorised the merger of the S&DR with the railways it held on lease. An application to Parliament for a jetty in the following year was unsuccessful, but in 1860 the Upsall, Normanby & Ormesby Railway received permission for a line with access to the river, the S&DR claim of exclusive rights to
954-403: A flatter bottom and squarer cross section, which increased their capacity. Walter Henry Wilson became a partner of the company in 1874. When Harland died in 1895, William James Pirrie became the chairman of the company and remained so until his death in 1924. Thomas Andrews , Pirrie's nephew, became the general manager and head of the draughting department in 1907. It was in this period that
1113-638: A fully integrated computer-controlled system. It is vital and effective in London's flood defences as well as being one of the capital's aesthetically pleasing major structures. Project sponsored by the Greater London Council . Consulting engineers Rendel Palmer and Tritton. Operated by the National Rivers Authority . Since its opening in 1911 it has provided a reliable crossing of the Tees, without
1272-481: A half miles ( 14 km) had been covered in two hours, and subtracting the 55 minutes accounted by the two stops, it had travelled at an average speed of 8 mph (13 km/h). Six waggons of coal were distributed to the poor, workers stopped for refreshments and many of the passengers from Brusselton alighted at Darlington, to be replaced by others. Two waggons for the Yarm Band were attached, and at 12:30 pm
1431-560: A horse to St Helen Auckland . The Bradshaw's railway guide for March 1843, after South Church opened, shows five services a day between Darlington and South Church via Shildon, with three between Shildon and St Helens. Also listed were six trains between Stockton and Hartlepool via Seaton over the Clarence Railway and the Stockton and Hartlepool Railway that had opened in 1841. By this time, Port Darlington had become overwhelmed by
1590-434: A jetty at Cargo Fleet , from where a ferry would carry the ore across the Tees to the blast furnaces. When the proposal was before Parliament the S&DR suggested that their Middlesbrough & Redcar could be extended to Saltburn , and the Tees crossed by a swing bridge. The Cleveland Railway received permission for a line from Skinningrove as far as Guisborough, and the S&DR permission for an extension to Saltburn and
1749-563: A link for the children of today with children of a bygone era. The steam driven extrusion plant was installed in 1897 and operated for over 70 years. Restored by the Hampshire Buildings Preservation Trust, this is thought to be the only working example in the country. Brick making machinery such as this was key to the expansion of our towns and cities. Designer: John Philip Holland Built by Vickers Maxim at Barrow-in-Furness and launched in 1901, this pioneer submarine
SECTION 10
#17330944486961908-507: A locomotive took them forward. When returning, regulations required that the carriages run loose down the Sunniside Incline and they were let to run into Crook station, controlled by the guard using the carriage brakes. Later, a 730 feet (220 m) viaduct replaced the two inclines at Hownes Gill ravine on 1 July 1858. A deviation replacing Nanny's Mayor's Incline, as well as a curve that allowed trains from Crook direct access to Rowley,
2067-576: A lucrative business, and the line was soon extended to a new port at Middlesbrough. While coal waggons were hauled by steam locomotives from the start, passengers were carried in coaches drawn by horses until carriages hauled by steam locomotives were introduced in 1833. The S&DR was involved in building the East Coast Main Line between York and Darlington, but its main expansion was at Middlesbrough Docks and west into Weardale and east to Redcar . It suffered severe financial difficulties at
2226-407: A man clinging to the outside of a waggon fell off and his foot was crushed by the following vehicle. As work on the final section of track to Stockton's quayside was still ongoing, the train halted at the temporary passenger terminus at St John's Well 3 hours, 7 minutes after leaving Darlington. The opening ceremony was considered a success and that evening 102 people sat down to a celebratory dinner at
2385-713: A maximum speed of 6 mph (9.7 km/h); the drivers were fined if caught travelling faster than 8 mph (13 km/h), and one was dismissed for completing the forty-mile return journey in 4 + 1 ⁄ 2 hours. On average there were about 40 coal trains a day, hauling 28 waggons with a weight of 116 tons. There were about 5,000 privately owned waggons, and at any one time about 1,000 stood at Shildon depot. The railway had modern passenger locomotives, some with four wheels. There were passenger stations at Stockton, Middlesbrough, Darlington, Shildon and West Auckland, and trains also stopped at Middlesbrough Junction, Yarm Junction, Fighting Cocks and Heighington. Some of
2544-523: A mine in the area and began moving ironstone 54 miles (87 km) to Consett, and the S&DR had paid the arrears on its debt and was able to pay a dividend the following year, albeit only 4 per cent; between 1849 and 1853 the traffic more than doubled. In 1852, the Leeds Northern Railway (LNR) built a line from Northallerton to a junction with the Stockton to Hartlepool line and a section of
2703-476: A new cast plaque was created. This was slightly modified in 2009 to reflect the rebranding of the Institution. The tilt hammers (1785) are probably the oldest set on their original site. They exemplify engineering technology in the heyday of water power. Together they symbolise the achievement of steel-makers and engineers which provided the foundations of the Industrial Revolution. On the opening day of
2862-453: A partner in the company. Wolff was the nephew of Gustav Schwabe , Hamburg , who was heavily invested in the Bibby Line , and the first three ships that the newly incorporated shipyard built were for that line. Harland made a success of the business through several innovations, notably replacing the wooden upper decks with iron ones which increased the strength of the ships; and giving the hulls
3021-452: A population of over 2,000 and at the 2011 census had over 138,000 people. In 1830, the company opened new offices at the corner of Northgate and Union Street in Darlington. Between 1831 and 1832 a second track was laid between Stockton and the foot of Brusselton Bank. Workshops were built at Shildon for the maintenance and construction of locomotives. In 1830 approximately 50 horses shared
3180-501: A railway between England and Scotland and favoured a railway via the west coast. Railway financier George Hudson chaired a meeting of representatives of north-eastern railways that wished a railway to be built via the east coast. In the 1830s a number of railways had opened in the area between Darlington and Newcastle, and Robert Stephenson was engaged to select a route using these railways as much as possible. The Newcastle and Darlington Junction Railway (N&DJR) differed slightly from
3339-596: A railway that could be used by anyone with suitably built vehicles on payment of a toll, that was closed at night, and with which land owners within 5 miles (8 km) could build branches and make junctions; no mention was made of steam locomotives. This new railway initiated the construction of more railway lines, causing significant developments in railway mapping and cartography, iron and steel manufacturing, as well as in any industries requiring more efficient transportation. Concerned about Overton's competence, Pease asked George Stephenson , an experienced enginewright of
SECTION 20
#17330944486963498-538: A rebuilt Darlington Bank Top station, rejoining the route to Stockton from a junction south of Darlington and a new line to Oak Tree Junction. An extension from Stanhope to Wearhead opened in 1895, and the line over Stainmore to Tebay was doubled by the end of the century. From 1913 former S&DR lines were electrified with 1,500 VDC overhead lines and electric locomotives hauled coal trains between Shildon and Erimus Marshalling Yard , which had opened in 1908 between Middlesbrough and Thornaby. The trains took
3657-648: A series of bridges in Britain and also in the Republic of Ireland , such as the James Joyce Bridge and the restoration of Dublin 's Ha'penny Bridge , building on the success of its first foray into the civil engineering sector with the construction of the Foyle Bridge in the 1980s. Harland & Wolff's last shipbuilding project was MV Anvil Point , one of six near identical Point-class sealift ships built for use by
3816-494: A ship's hold could discharge coal from the bottom. About 18,500 tons of coal was transported to ships in the year ending June 1827, and this increased to over 52,000 tons the following year, 44.5% of the total carried. The locomotives were unreliable at first. Soon after opening, Locomotion No. 1 broke a wheel, and it was not ready for traffic until 12 or 13 October; Hope , the second locomotive, arrived in November 1825 but needed
3975-663: A speed of 18 knots. Designed by Roy Chadwick and Stuart Davies The last airworthy representative of the RAF's V-bomber fleet, the British strategic deterrent from 1955 to 1969, the Vulcan is a stirring example of British leadership in aviation. XH558 was in service until 1993 and is powered by four Rolls-Royce Olympus engines. Opened in 1866, the Talyllyn Railway is the oldest continuously operated narrow gauge railway in Britain. In 1951 it became
4134-400: A speed of 32 knots, twelve 6 inch guns and displacing 11,500 tons; HMS Belfast's success in battle is a tribute to her sound design and the skill and courage of her crew. A unique collection of working textile and power machinery enabling visitors to experience the whole process from spinning raw cotton to weaving finished cloth. Quarry Bank Mill is a site of educational importance, providing
4293-469: A speed of 42 mph (68 km/h) was recorded. Over 200,000 passengers were carried in the year to 1 October 1838, and in 1839 there were twelve trains each day between Middlesbrough and Stockton, six trains between Stockton and Darlington, and three between Darlington and Shildon, where a carriage was fitted with Rankine 's self-acting brake, taken over the Brussleton Inclines , and then drawn by
4452-577: A station until confirmation had been received that the line was clear. By 1857, a blast furnace had opened close to the Durham coalfield on the north side of the Tees. Backed by the rival West Hartlepool Harbour & Railway , the Durham & Cleveland Union Railway proposed a line from the mines in Skinningrove and Staithes , via Guisborough and a bridge over the Middlesbrough & Redcar Railway to
4611-606: A stationary engine. Sponsored by the Derwent Iron Company, the 10-mile (16 km) line was built by the S&DR and opened on 16 May 1845. A passenger service started to Hownes Gill and Stanhope (Crawley) on 1 September 1845; the Stanhope service was withdrawn at the end of 1846. Travelling north from Crook the carriages and waggons were drawn up the Sunniside Incline, a locomotive hauled the mixed train to Waskerley Park Junction, then they were let down Nanny Mayor's Incline and
4770-445: A stop and was run down by a locomotive. The rule book stated that locomotive-hauled trains had precedence over horse-drawn trains, but some horse drivers refused to give way and on one occasion a locomotive had to follow a horse-drawn train for over 2 miles (3 km). The committee decided in 1828 to replace horses with locomotives on the main line, starting with the coal trains, but there was resistance from some colliery owners. After
4929-400: A usable line could be built within the bounds of the act of Parliament, but another route would be shorter by 3 miles (5 km) and avoid deep cuttings and tunnels. Overton had kept himself available, but had no further involvement and the shareholders elected Stephenson Engineer on 22 January 1822, with a salary of £660 per year. On 23 May 1822 a ceremony in Stockton celebrated the laying of
Engineering Heritage Awards - Misplaced Pages Continue
5088-427: A week and a one-way journey on Tuesdays and Saturdays. In April 1826, the operation of the coach was contracted for £200 a year; by then the timetabled journey time had been reduced to 1 hour 15 minutes, and passengers were allowed to travel on the outside for 9d. A more comfortable coach, Express , started the same month and charged 1s 6d for travel inside. Innkeepers began running coaches, two to Shildon from July, and
5247-410: A week to ready it for the line – the cast-iron wheels were a source of trouble. Two more locomotives of a similar design arrived in 1826; that August, 16s 9d was spent on ale to motivate the men maintaining the engines. By the end of 1827, the company had also bought Chittaprat from Robert Wilson and Experiment from Stephenson. Timothy Hackworth , locomotive superintendent, used the boiler from
5406-574: Is held at the Ulster Folk and Transport Museum (UFTM). This has a photographic collection and a ships' plans collection (i.e., technical drawings). Around 8,000 prints of Harland & Wolff-built ships covering the period 1890-1945 are held in bound volumes in the UFTM's library. However the UFTM's collection of ships' plans is not currently available to the public nor is there a copy service. Selected early ship's plans (dating from 1860 to 1882) are reproduced in
5565-508: Is now known as the Titanic Quarter , and includes the £97 million Titanic Belfast visitor attraction. In recent years the company has seen its ship-related workload increase. While Harland & Wolff has had no recent involvement in shipbuilding projects, the company is increasingly involved in overhaul, re-fitting and ship repair, as well as the construction and repair of off-shore equipment such as oil platforms . On 1 February 2011 it
5724-466: Is powered by his greatest invention, the first practical steam turbine, which transformed high speed ship propulsion and established the foundation for present-day electrical power generation. It is an example of the first commercially successful internal combustion engine which was introduced at the 1867 Paris Exhibition. Reducing refuse to sterile, inert residue and extending the life of landfill sites are additional environmental and economic benefits of
5883-533: Is still dominated today by Harland & Wolff's famous twin gantry cranes , Samson and Goliath , built in 1974 and 1969 respectively. In late 2007, the 'Goliath' gantry crane was re-commissioned, having been moth-balled in 2003 due to the lack of heavy-lifting work at the yard. In June 2008, assembly work at the Belfast yard was underway on 60 Vestas V90-3MW wind turbines for the Robin Rigg Wind Farm . This
6042-491: The Bishop Auckland and Weardale Railway Act 1837 ( 7 Will. 4 & 1 Vict. c. cxxii) of July 1837 to build an 8 + 1 ⁄ 4 -mile (13.3 km) line from South Church to Crook . The line opened on 8 November 1843 with a station at Bishop Auckland . The Stanhope and Tyne Railway , a 33 + 3 ⁄ 4 -mile (54.3 km) line between South Shields and Stanhope had opened in 1834. Steam locomotives worked
6201-493: The Middlesbrough and Guisborough Railway Act 1852 ( 15 & 16 Vict. c. lxxiii) on 17 June 1852; Pease had to guarantee dividends to raise the finance needed. The 9 + 1 ⁄ 2 -mile (15.3 km) single-track railway was worked by the S&DR, and opened to minerals on 11 November 1853 and passengers on 25 February 1854. With electric telegraph installed between stations, passenger trains were not permitted to leave
6360-660: The Wear Valley Railway Act 1845 ( 8 & 9 Vict. c. clii), was the Wear Valley Railway, a 12-mile (19 km) line from the Bishop Auckland & Weardale line to Frosterley . The line opened on 3 August 1847, and the act also gave the S&DR permission for the Bishopley branch, over which 500,000 tons of limestone travelled in 1868. The line was extended in 1862 from Frosterley to Stanhope . Just before
6519-564: The 0-6-0 s used on mineral trains. Later locomotives were of the Stephenson long boilered type. Most passenger locomotives were 2-4-0 s, though some were 2-2-2 s. Bouch designed two 4-4-0 locomotives for the line over Stainmore in 1860, and another fourteen with this wheel arrangement had been built by 1874. S&DR services and those on the ECML called at different stations in Darlington until 1887, when S&DR trains were diverted through
Engineering Heritage Awards - Misplaced Pages Continue
6678-582: The Belah Viaduct , 1,040 feet (320 m) long and 196 feet (60 m) high. A new station was built to replace the terminus at Barnard Castle. A mineral train ran between Barnard Castle and Barras on 26 March 1861, and mineral traffic worked through to Tebay from 4 July 1861. There was an opening ceremony on 7 August 1861 and the SD&;LUR west of Barnard Castle opened to passengers the following day. Two 4-4-0 locomotives with enclosed cabs had been built for
6837-507: The Geddes Committee recommended that the British government advance loans and subsidies to British shipyards to modernise production methods and shipyard infrastructure to preserve jobs. A major modernisation programme at the shipyard was undertaken, centred on the creation of a large construction graving dock serviced by two Krupp Goliath cranes, the iconic Samson and Goliath , enabling
6996-489: The Great North of England Railway (GNER), a line from York to Newcastle that used the route of the 1 + 1 ⁄ 2 -mile (2.4 km) Croft branch at Darlington. The railway was to be built in sections, and to allow both to open at the same time permission for the more difficult line through the hills from Darlington to Newcastle was to be sought in 1836 and a bill for the easier line south of Darlington to York presented
7155-475: The Ministry of Defence . The ship, built under licence from German shipbuilders Flensburger Schiffbau-Gesellschaft , was launched in 2003. The company unsuccessfully tendered against Chantiers de l'Atlantique for the construction of Cunard line 's Queen Mary 2 . In 2003, Harland & Wolff's parent company sold 185 acres of surplus shipyard land and buildings to Harcourt Developments for £47 million. This
7314-611: The North Eastern Railway in 1863, transferring 200 route miles (320 route kilometres) of line and about 160 locomotives, but continued to operate independently as the Darlington Section until 1876. S&DR opening was seen as proof of steam railway effectiveness and its anniversary was celebrated in 1875, 1925 and 1975. Much of the original route is now served by the Tees Valley Line , operated by Northern . Coal from
7473-546: The River Wear who supplied London and feared competition, and it had been necessary to restrict the rate for transporting coal destined for ships to 1 ⁄ 2 d per ton per mile, which had been assumed would make the business uneconomic. There was interest from London for 100,000 tons a year, so the company began investigations in September 1825. In January 1826, the first staith opened at Stockton, designed so waggons over
7632-635: The Royal Air Force . In the Second World War , this factory built Short Stirling bombers as the Hereford was removed from service. The shipyard was busy in the Second World War, building six aircraft carriers , two cruisers (including HMS Belfast ) and 131 other naval ships; and repairing over 22,000 vessels. It also manufactured tanks and artillery components. It was in this period that
7791-524: The Royal Fleet Auxiliary 's three new Fleet Solid Support vessels. Harland & Wolff was formed in 1861 by Edward James Harland (1831–1895) and Hamburg -born Gustav Wilhelm Wolff (1834–1913) who came to the UK aged 14. In 1858 Harland, then general manager, bought the small shipyard on Queen's Island from his employer Robert Hickson. After buying Hickson's shipyard, Harland made his assistant Wolff
7950-514: The Stockton & Darlington Railway , 27 September 1825, he drove this engine, hauling the inaugural train, on the world's first steam-worked public railway. Developed from the P1127, a concept by the Hawker Aircraft and Bristol Siddeley Engines design teams under the leadership of Sir Sydney Camm and Sir Stanley Hooker . It incorporates ten different climatic zones, created and maintained by
8109-524: The Union , which served the Yarm branch from 16 October. There were no stations: in Darlington the coaches picked up passengers near the north road crossing, whereas in Stockton they picked up at different places on the quay. Between 30,000 and 40,000 passengers were carried between July 1826 and June 1827. The export of coal had become the railway's main business, but the staiths at Stockton had inadequate storage and
SECTION 50
#17330944486968268-621: The ocean liners for the White Star Line , including Olympic -class trio – RMS Olympic , RMS Titanic and HMHS Britannic . Outside of White Star Line, other ships that have been built include the Royal Navy 's HMS Belfast ; Royal Mail Line 's Andes ; Shaw, Savill & Albion 's Southern Cross ; Union-Castle 's RMS Pendennis Castle ; P&O 's Canberra ; and Hamburg-America 's SS Amerika of 1905. Harland and Wolff's official history, Shipbuilders to
8427-502: The 1950s. Stockton %26 Darlington Railway The Stockton and Darlington Railway ( S&DR ) was a railway company that operated in north-east England from 1825 to 1863. The world's first public railway to use steam locomotives , its first line connected collieries near Shildon with Darlington and Stockton in County Durham, and was officially opened on 27 September 1825. The movement of coal to ships rapidly became
8586-538: The Belfast yard completed its first new vessel since Anvil Point in 2003. It is a barge for the waste management company, Cory , the first of an order for 23 such craft. From 2025 the yard is expecting to complete the final assembly of three naval support ships for the Royal Navy as part of the Team Resolute Consortium. On 16 September 2024, it was reported that Harland & Wolff entered administration for
8745-774: The Belfast yard. The installation of the 1.2MW SeaGen Tidal System was begun in Strangford Lough in April 2008. In July 2010, Harland & Wolff secured a contract to make a prototype tidal energy turbine for Scotrenewables Ltd. Manufacture of the SR250 device was completed in May 2011 and has been undergoing testing in Orkney since. Since April 2012, the booming offshore wind power industry has taken centre stage. Harland & Wolff had been working on three innovative meteorological mast foundations for
8904-649: The Brusselton Inclines were bypassed by a line from the north end of Shildon Tunnel; the same year a passenger service started on the Hagger Leases branch and a mineral line opened from Crook via two inclines to Waterhouse. The section of the SD&LUR between West Auckland and Barnard Castle opened for minerals in July 1863 and passengers on 1 August 1863, together with a direct line from Bishop Auckland to West Auckland. Stations at Evenwood and Cockfield replaced stations on
9063-555: The Dogger Bank and Firth of Forth offshore wind farms, as well as putting the finishing touches to two Siemens substations for the Gwynt y Môr offshore wind farm. Seventy-five per cent of the company's work was based on offshore renewable energy . Harland & Wolff was one of many UK and international companies profiting from the emergence of UK wind- and marine-generated electricity, which had been attracting significant inward investment. As
9222-509: The Duke of Cleveland's estate, as he had opposed an earlier railway. An application that year failed, but the Darlington and Barnard Castle Railway Act 1854 ( 17 & 18 Vict. c. cxv) was given royal assent on 3 July 1854 and the 15 + 1 ⁄ 4 -mile (24.5 km) railway opened on 8 July 1856. Cleveland iron ore is high in phosphorus and needs to be mixed with purer ores, such as those on
9381-642: The First World War. During the 1920s, Catholic workers, Socialists and labour activists were routinely expelled from their jobs in the shipyard: Similar actions had occurred in June 1898 and July, 1912. See The Troubles in Ulster (1920–1922) . The company started an aircraft manufacturing subsidiary with Short Brothers , called Short & Harland Limited in 1936. Its first order was for 189 Handley Page Hereford bombers built under licence from Handley Page for
9540-915: The GNER route in the southern section before joining the Durham Junction Railway at Rainton and using the Pontop & South Shields Railway from Washington to Brockley Whins, where a new curve onto the Brandling Junction Railway allowed direct access to Gateshead. This required the construction of 25 + 1 ⁄ 2 miles (41.0 km) of new line, 9 miles (14 km) less than the GNER route, but trains would need to travel 7 + 1 ⁄ 2 miles (12.1 km) further. This route ran parallel to S&DR lines for 5 miles (8.0 km) and Pease argued that it should run over these as it would add only 1 + 1 ⁄ 2 miles (2.4 km). The bill
9699-666: The H&;W Belfast shipyard by focusing on smaller ships of up to 119 metres in the shipbuilding and ship repair market. In February 2021, InfraStrata acquired two BiFab yards, the £850,000 deal was struck for the Methil and Arnish yards, (but not the Burntisland facility). These Scottish facilities will trade under the Harland & Wolff brand. In September 2021, Infrastrata plc was renamed Harland & Wolff Group Holdings plc. In April 2023,
SECTION 60
#17330944486969858-474: The Hagger Leases Branch and to build a bridge across the Tees at least 72 feet (22 m) wide and 19 feet (5.8 m) above low water, so as not to affect shipping. Two members of the management committee resigned, as they felt that Stockton would be adversely affected by the line, and Meynell, the S&DR chairman, stepped down from leadership. The Clarence Railway was approved a few days later, with
10017-743: The Hagger Leases branch. In 1859, a company had been formed to link the Newcastle & Carlisle Railway with the SD&R via the Derwent Valley; by 1860 this had grown into the Newcastle, Derwent & Weardale Railway, which now bypassed the SD&R and linked with the SD&LUR, and the North British and London and North Western (LNWR) railways were providing two-thirds of the capital. The LNWR proposed to build warehouses in Hartlepool and buy shares in
10176-452: The Institution's Technical Support department before a decision was taken on the application. In 2007, the Institution established the Heritage Committee to relaunch and promote the now renamed Engineering Heritage Awards. It simplified the application process, making it more transparent and with a quicker decision-making process. Furthermore, the criteria were changed, and the Institution's own library and information service became involved in
10335-447: The NER than eventually becoming part of the LNWR, entered negotiations. Opposed by the NER, the Newcastle, Derwent & Weardale Railway bill was approved by the House of Commons in 1861, but the line was eventually rejected by the House of Lords. The SD&LUR and EVR were absorbed by the S&DR on 30 June 1862. With 200 route miles (320 km) of line and about 160 locomotives, the Stockton and Darlington Railway became part of
10494-410: The North Eastern Railway on 13 July 1863. Due to a clause in the act of Parliament, the railway was managed as the independent Darlington Section until 1876, when the lines became the NER's Central Division. After the restoration of the dividend in 1851, by the end of 1854 payments had recovered to 8 per cent and then had not dropped below 7 + 1 ⁄ 2 per cent. The NER had built a branch in
10653-513: The North Eastern area of the London and North Eastern Railway (LNER). The passenger service was withdrawn north of Tow Law on 1 May 1939. Britain's railways were nationalised on 1 January 1948 and the lines were placed under the control of British Railways . In the early 1950s control was split between the North Eastern and London Midland regions with Kirkby Stephen as the boundary. Local passenger trains were withdrawn between Kirkby Stephen and Tebay on 1 December 1952. The service along Weardale
10812-457: The Old Channel of the Tees. The S&DR prepared to return to Parliament but withdrew after a design for a drawbridge was agreed with the Navigation Company. The line to Middlesbrough was laid with malleable iron rails weighing 33 lb/yd (16 kg/m), resting on oak blocks. The suspension bridge had been designed to carry 150 tons, but the cast iron retaining plates split when it was tested with just 66 tons and loaded trains had to cross with
10971-451: The S&DR bought out the coach companies in August 1832, a mixed passenger and small goods service began between Stockton and Darlington on 7 September 1833, travelling at 12–14 miles per hour (19–23 km/h); locomotive-hauled services began to Shildon in December 1833 and to Middlesbrough on 7 April 1834. The company had returned the five per cent dividend that had been promised by Edward Pease, and this had increased to eight per cent by
11130-474: The S&DR had share capital of £250,000 but owed £650,000, most of this without the authority of Parliament until 1849; the debt was converted into shares in 1851. In mid-1850, Henry Bolckow and John Vaughan discovered a seam of iron ore at Eston . They opened a mine, laid a branch line to the Middlesbrough & Redcar Railway and started hauling ironstone over the S&DR to their blast furnaces west of Bishop Auckland. By 1851, Derwent Iron had opened
11289-419: The S&DR installed Alexander Bain 's "I and V" electric telegraph to regulate the passage of trains through the tunnel. The SD&R provided a 3 + 1 ⁄ 4 hour service between Darlington and Newcastle, with a four-horse omnibus from South Church to Rainton Meadows on the Durham Junction Railway , from where trains ran to Gateshead , on the south side of the River Tyne near Newcastle. By 1839,
11448-608: The S&DR introduced a service between Darlington and Coxhoe, on the Clarence Railway, where an omnibus took passengers the 3 + 1 ⁄ 2 miles (5.6 km) to the Durham & Sunderland Railway at Shincliffe. Early in 1842, the nominally independent Shildon Tunnel Company opened its 1,225-yard (1,120 m) tunnel through the hills at Shildon to the Wear basin and after laying 2 miles (3.2 km) of track to South Church station , south of Bishop Auckland , opened in May 1842. In 1846,
11607-573: The S&DR's line near today's Newton Aycliffe station with Haverton and Stockton, via a route that was 6 miles (10 km) shorter than via the route of the S&DR, and named the Clarence Railway in honour of the Duke of Clarence, later King William IV . Meetings held in Stockton in early 1828 supported the Tees Navigation and the Clarence Railway, but the S&DR received permission for its branch on 23 May 1828 after promising to complete
11766-646: The SD&LUR crossed the Pennines via Kirkby Stephen to meet the West Coast Main Line (WCML) at Tebay , on the section then controlled by the Lancaster and Carlisle Railway , and also linked Barnard Castle with West Auckland. The EVR was a branch from Kirkby Stephen to the WCML near Penrith via Appleby . The routes were surveyed by Thomas Bouch and SD&LUR received permission on 13 July 1857. The EVR route followed
11925-640: The Town Hall. The railway that opened in September 1825 was 25 miles (40 km) long and ran from Phoenix Pit, Old Etherley Colliery, to Cottage Row, Stockton; there was also a 1 ⁄ 2 mile (800 m) branch to the depot at Darlington, 1 ⁄ 2 mile (800 m) of the Hagger Leases branch, and a 3 ⁄ 4 mile (1,200 m) branch to Yarm. Most of the track used 28 pounds per yard (13.9 kg/m) malleable iron rails, and 4 miles (6.4 km) of 57 + 1 ⁄ 2 lb/yd (28.5 kg/m) cast iron rails were used for junctions. The line
12084-469: The West Hartlepool Harbour & Railway. The North Eastern Railway (NER), formed in 1854 by amalgamation, at the time was the largest railway company in the country and controlled the East Coast Main Line from Knottingley , south of York, through Darlington to Berwick-upon-Tweed . When they approached the S&DR with a proposal to merge, the directors deciding they preferred a merger with
12243-512: The World , was published in 1986. Today, the company is focused on supporting five sectors: Defence , Energy , Cruise & Ferry , Renewables and Commercial . It offers services including technical services, fabrication & construction, repair & maintenance, in-service support, conversion and decommissioning. In 2022, the company was awarded a major naval contract as part of Team Resolute (alongside Navantia UK and BMT ), to deliver
12402-424: The aircraft factory. With the rise of the jet-powered airliner in the late 1950s, the demand for ocean liners declined. This, coupled with competition from Japan , led to difficulties for the British shipbuilding industry. The last liner that the company launched was MV Arlanza for Royal Mail Line in 1960; the last liner completed was SS Canberra for P&O in 1961. In the 1960s, notable achievements for
12561-406: The business environment became increasingly competitive the yard began to have difficulty in generating enough business to meet overhead expenses. The yard was last profitable in 2015 and the following year it had an operating loss of £6 million. In 2018, the parent company Fred. Olsen & Co. restructured and decided to place Harland and Wolff up for sale. No buyer emerged and on 5 August 2019
12720-565: The collieries of Killingworth, to meet him in Darlington. On 12 May 1821 the shareholders appointed Thomas Meynell as chairman and Jonathan Backhouse as treasurer; a majority of the managing committee, which included Thomas Richardson , Edward Pease and his son Joseph Pease , were Quakers. The committee designed a seal, showing waggons being pulled by a horse, and adopted the Latin motto Periculum privatum utilitas publica ("At private risk for public service"). By 23 July 1821 it had decided that
12879-613: The collieries to Simpasture for forwarding to Port Clarence, rather than the lower shipping rate. By July 1834, the Exchequer Loan Commissioners had taken control of the Clarence Railway. The Croft branch opened in October 1829. Construction of the suspension bridge across the Tees started in July 1829, but was suspended in October after the Tees Navigation Company pointed out the S&DR had no permission to cross
13038-457: The commissioners' steam tugs arrived. The police then kept watch on the works until they were finished. Henry Pease , a S&DR director and Quaker, visited his brother Joseph in mid-1859 at his house by the sea at Marske-by-the-Sea . Returning late for dinner, he explained he had walked to Saltburn, then a group of fisherman's cottages, where he had had a "sort of prophetic vision" of a town with gardens. With other S&DR directors he planned
13197-507: The committee then made an experimental journey to Darlington before taking the locomotive and coach to Shildon in preparation for the opening day, with James Stephenson, George's elder brother, at the controls. On 27 September, between 7 am and 8 am, 12 waggons of coal were drawn up Etherley North Bank by a rope attached to the stationary engine at the top, and then let down the South Bank to St Helen's Auckland . A waggon of flour bags
13356-455: The company announced that they would cease trading and entered formal administration. Subsequently, on 1 October 2019, it was announced that the shipyard had been bought for £6 million by the London-based energy firm, InfraStrata. In August 2020, InfraStrata also bought the dormant Appledore shipyard for £7 million. The deal will see the shipyard renamed H&W Appledore complementing
13515-498: The company built Olympic and the two other ships in her class, Titanic and Britannic , between 1909 and 1914. It commissioned Sir William Arrol & Co. to construct a massive twin slipway and gantry structure for the project. In 1912, due primarily to increasing political instability in Ireland, the company acquired another shipyard at Govan in Glasgow , Scotland. It bought
13674-543: The company's workforce peaked at around 35,000 people. However, many of the vessels built in this era were commissioned right at the end of the Second World War, as Harland and Wolff were focused on ship repair in the first three years of the war. The yard on Queen's Island was heavily bombed by the Luftwaffe in April and May 1941 during the Belfast Blitz , causing considerable damage to the shipbuilding facilities and destroying
13833-619: The early 1960s when the company opted to consolidate its operations in Belfast. In the First World War , Harland and Wolff built Abercrombie-class monitors and cruisers , including the 15-inch gun armed "large light cruiser" HMS Glorious . In 1918, the company opened a new shipyard on the eastern side of the Musgrave Channel which was named the East Yard. This yard specialised in mass-produced ships of standard design developed in
13992-567: The early 1960s, was demolished. The nationalised company was sold by the British government in 1989 to a management/employee buy-out in partnership with the Norwegian shipping magnate Fred Olsen ; this buy-out led to a new company called Harland & Wolff Holdings Plc . By this time, the number of people employed by the company had fallen to around 3,000. For the next few years, Harland & Wolff specialised in building standard Suezmax oil tankers , and has continued to concentrate on vessels for
14151-524: The east bank of the River Eden , a mile longer than a more expensive route on the west bank, and its act received royal assent on 21 May 1858. Bouch had laid out an economical route that followed the contours and avoided tunnels, but there were formidable gradients up to the 1,370-foot-high (420 m) Stainmore Summit . Land for two tracks was purchased, and a single track line was laid; valleys were crossed by viaducts, three made from wrought iron, including
14310-497: The end of the 1840s and was nearly taken over by the York, Newcastle and Berwick Railway , before the discovery of iron ore in Cleveland and the subsequent increase in revenue meant it could pay its debts. At the beginning of the 1860s it took over railways that had crossed the Pennines to join the West Coast Main Line at Tebay and Clifton, near Penrith . The company was taken over by
14469-479: The estimates. By September 1825, the company had borrowed £60,000 in short-term loans and needed to start earning an income to ward off its creditors. A railway coach, named Experiment , arrived on the evening of 26 September 1825 and was attached to Locomotion No. 1 , which had been placed on the rails for the first time at Aycliffe Lane station following the completion of its journey by road from Newcastle earlier that same day. Pease, Stephenson and other members of
14628-484: The first Chief Mechanical Engineer, Sir John Anderson (1814–1886), Vice President of the Institution of Mechanical Engineers. A & J Inglis Ltd – Glasgow Built in 1946 for the London & North Eastern Railway , Waverley is the last seagoing paddle steamer in the world. She has a displacement of 693 tons and Rankin & Blackmore triple expansion steam engine producing 2100 ihp at 58 rpm. In acceptance trials she achieved
14787-447: The first track at St John's Well, the rails 4 ft 8 in ( 1,422 mm ) apart, the same gauge used by Stephenson on his Killingworth Railway . Stephenson advocated the use of steam locomotives on the line. Pease visited Killingworth in mid-1822 and the directors visited Hetton colliery railway , on which Stephenson had introduced steam locomotives. A new bill was presented, requesting Stephenson's deviations from
14946-411: The following year. Pease specified a formation wide enough for four tracks, so freight could be carried at 30 miles per hour (48 km/h) and passengers at 60 mph (97 km/h), and George Stephenson had drawn up detailed plans by November. The Act for the 34 + 1 ⁄ 2 miles (55.5 km) from Newcastle to Darlington was given royal assent on 4 July 1836, but little work had been done by
15105-541: The foreshore having been rejected. The jetty was also opposed by the Tees Conservancy Commissioners and they moored barges along the foreshore to obstruct construction. In what became known as the Battle of the Tees, a fight broke out when a steam tug sent by the commissioners interrupted men moving the barges. The barges were successfully moved, but a more serious fight developed the following night when three of
15264-403: The formal opening of the new dock took place on 12 May 1842. The S&DR provided most of the finance, and the dock was absorbed by the company in 1849. The GNER had authority for a railway from York to Newcastle; it opened to Darlington in 1841 having spent all of its authorised capital and could not start work on the extension to Newcastle. At the time Parliament was considering the route of
15423-542: The former London & Glasgow Engineering & Iron Shipbuilding Co's Middleton and Govan New shipyards in Govan and Mackie & Thomson's Govan Old Yard, which had been owned by William Beardmore and Company . The three neighbouring yards were amalgamated and redeveloped to provide a total of seven building berths, a fitting-out basin and extensive workshops. Harland & Wolff specialised in building tankers and cargo ships at Govan. The nearby shipyard of A. & J. Inglis , on
15582-535: The former Marconi shipyards on the Clyde and at Barrow-in-Furness thus rendering H&W's involvement surplus to requirements. Faced with competitive pressures, Harland & Wolff sought to shift and broaden their portfolio, focusing less on shipbuilding and more on design and structural engineering, as well as ship repair, offshore construction projects and competing for other projects to do with metal engineering and construction. This led to Harland and Wolff constructing
15741-545: The former S&DR line from Shildon to Simpasture Junction, joining the former Clarence Railway line to Carlton, where a later line allowed access to the Stockton to Middlesbrough extension. The locomotives operated for 20 years, but then coal traffic had reduced, which made it uneconomical to maintain the electrification system. As a result of the Railways Act 1921 , on 1 January 1923 the North Eastern Railway became
15900-473: The horse downhill, allowing it to rest while the train descended under gravity. The S&DR made their use compulsory from November 1828. Passenger traffic started on 10 October 1825, after the required licence was purchased, using the Experiment coach hauled by a horse. The coach was initially timetabled to travel from Stockton to Darlington in two hours, with a fare of 1s, and made a return journey four days
16059-418: The inland mines in southern County Durham used to be taken away on packhorses , and then horse and carts as the roads were improved. A canal was proposed by George Dixon in 1767 and again by John Rennie in 1815, but both schemes failed. The harbour of Stockton-on-Tees invested considerably during the early 19th century in straightening the Tees in order to improve navigation on the river downstream of
16218-481: The late 1850s from Durham to Bishop Auckland, but used a separate station in the town until December 1867, when all services began to use the S&DR station. The Sunniside Incline was replaced by a deviation, albeit with gradients of 1 in 51 and 1 in 52, which opened for mineral traffic on 10 April 1867 and for passengers on 2 March 1868; after 1868 trains on this line were extended to serve Benfieldside station (later known as Blackhill and then Consett ). In Cleveland,
16377-409: The line in 1860 by Stephenson and Co, and the S&DR worked traffic from the start: two return services a day were provided for passengers. The EVR opened to mineral traffic on 8 April 1862 and passengers on 9 June 1862, to the south-facing junction at Clifton (later Clifton & Lowther ). The S&DR had presented a bill in 1861 to provide better connections for passengers on the WCML by extending
16536-472: The line opened on 22 July 1847, the Wear Valley Railway absorbed the Shildon Tunnel, Bishop Auckland & Weardale Railway, Weardale Extension Railway and Wear & Derwent Railway and then the S&DR leased the Wear Valley Railway and Middlesbrough & Redcar Railways for 999 years. This required a payment of £47,000 each year, exceeding the SD&R's net revenue; traffic from the Derwent Iron Company
16695-651: The line up to Penrith , and to link up with the Cockermouth, Keswick and Penrith Railway to provide access for mineral traffic to Cumberland. The L&CR agreed to allow the S&DR running rights over its line and services were extended to Penrith from 1 August 1863. In 1854, there were five or six trains a day between Darlington and Redcar and three a day between Darlington and Frosterley. Travelling at average speeds of 19–24 miles per hour (31–39 km/h), passengers were charged from 1d per mile for third class to 2.2d per mile for first. Horses were still used on trains in
16854-408: The line would be a railway with edge rails, rather than a plateway , and appointed Stephenson to make a fresh survey of the line. Stephenson recommended using malleable iron rails, even though he owned a share of the patent for the alternative cast iron rails, and both types were used. Stephenson was assisted by his 18-year-old son Robert during the survey, and by the end of 1821 had reported that
17013-484: The locomotive started for Stockton, now hauling 31 vehicles with 550 passengers. On the 5 miles (8 km) of nearly level track east of Darlington the train struggled to reach more than 4 mph (6.4 km/h). At Eaglescliffe near Yarm crowds waited for the train to cross the Stockton to Yarm turnpike. Approaching Stockton, running alongside the turnpike as it skirted the western edge of Preston Park , it gained speed and reached 15 mph (24 km/h) again, before
17172-593: The mid-1850s: a horse-drawn coach was still independently operated between Middlesbrough and Stockton in 1854 on Sundays, as the only S&DR services that run on that day were the mail trains, and locomotives replaced horses on passenger trains to West Auckland in 1856. The S&DR opened a carriage works south of Darlington North Road station in 1853 and later it built a locomotive works nearby to replace its works at Shildon. Designed by William Bouch , who had taken over from Hackworth as Locomotive Supervisor in 1840, it completed its first locomotive in 1864. In 1858
17331-441: The modified road coaches were still in use, but there were also modern railway carriages, some first class with three compartments each seating eight passengers, and second class carriages that seated up to 40. Luggage and sometimes the guard travelled on the carriage roof; a passenger travelling third class suffered serious injuries after falling from the roof in 1840. Passenger trains averaged 22–25 mph (35–40 km/h), and
17490-426: The need for approach embankments, allowing freedom of passage to ocean-going vessels. Designed by Mr GC Imbault of Cleveland Bridge & Engineering Company and built by Sir William Arrol & Co. It earned a worldwide reputation for the quality of the railway axles produced in the 19th century. It was a pioneering example of integrated engineering, combining research, design, and manufacture and testing. Turbinia
17649-745: The north bank of the Clyde and the east bank of the Kelvin, was also purchased by Harland & Wolff in 1919, along with the Meadowside shipyard of D. and W. Henderson and Company , on the north bank of the Clyde but on the west bank of the Kelvin. The company also bought a stake in the company's primary steel supplier, David Colville & Sons . Harland & Wolff also established shipyards at Bootle in Liverpool , North Woolwich in London and Southampton . However, these shipyards were all eventually closed, beginning in
17808-557: The north of Darlington to reach Stockton . The Scottish engineer Robert Stevenson was said to favour the railway, and the Quaker Edward Pease supported it at a public meeting in Darlington on 13 November 1818, promising a five per cent return on investment. Approximately two-thirds of the shares were sold locally, and the rest were bought by Quakers nationally. A private bill was presented to Parliament in March 1819, but as
17967-413: The offshore oil and gas industry. It has made some forays outside this market. In the late 1990s, the yard was part of the then British Aerospace team for the Royal Navy 's Future Carrier (CVF) programme. It was envisaged that the ship would be assembled at the Harland & Wolff dry-dock in Belfast. In 1999, BAE merged with Marconi Electronic Systems . The new company, BAE Systems Marine , included
18126-507: The opening celebration on 18 June 1844, through services ran from London to Gateshead the following day. The N&DJR made an offer to lease the GNER and buy it within five years, and GNER shares increased in value by 44 per cent as the N&;DJR took over on 1 July 1845; the N&DJR became part of the larger York, Newcastle and Berwick Railway (YN&BR) in 1847. The Bishop Auckland & Weardale Railway (BA&WR) received permission in
18285-667: The original route and the use of "loco-motives or moveable engines", and this received royal assent on 23 May 1823 as the Stockton and Darlington Railway Act 1823 ( 4 Geo. 4 . c. xxxiii). The line included embankments up to 48 feet (15 m) high, and Stephenson designed an iron truss bridge to cross the River Gaunless . The Skerne Bridge over the River Skerne was designed by the Durham architect Ignatius Bonomi . In 1823, Stephenson and Pease opened Robert Stephenson and Company ,
18444-413: The price of coal dropped from 18 to 12 shillings , and by the beginning of 1827 was 8 shillings 6 pence (8s 6d). At first, the drivers had been paid a daily wage, but after February 1826 they were paid 1 ⁄ 4 d per ton per mile; from this they had to pay assistants and fireman and to buy coal for the locomotive. The 1821 act of Parliament had received opposition from the owners of collieries on
18603-419: The procession. The train stopped when the waggon carrying the company surveyors and engineers lost a wheel; the waggon was left behind and the train continued. The train stopped again, this time for 35 minutes to repair the locomotive and the train set off again, reaching 15 mph (24 km/h) before it was welcomed by an estimated 10,000 people as it came to a stop at the Darlington branch junction. Eight and
18762-524: The quay until 1848, when it was replaced by a station on the Middlesbrough line on the other side of the Tees. Before May 1829, Thomas Richardson had bought about 500 acres (200 ha) near Port Darlington, and with Joseph and Edward Pease and others he formed the Owners of the Middlesbrough Estate to develop it. Middlesbrough had only a few houses before the coming of the railway, but a year later had
18921-400: The remaining locomotives as soon as possible. In 1828, two locomotive boilers exploded within four months, both killing the driver and both due to the safety valves being left fixed down while the engine was stationary. Horses were also used on the line, and they could haul up to four waggons. The dandy waggon was introduced in mid-1828; it was a small cart at the end of the train that carried
19080-515: The river and proposed that the railway delay application to Parliament, but, despite opposition, at a meeting in January 1828 it was decided to proceed. A more direct northerly route from Auckland to the Tees had been considered since 1819, and the Tees & Weardale Railway had applied unsuccessfully to Parliament for permission for such a line in 1823, 1824 and 1825. This now became a 11 + 1 ⁄ 2 -mile (18.5 km) line linking Simpasture on
19239-460: The route passed through Earl of Eldon 's estate and one of the Earl of Darlington 's fox coverts, it was opposed and defeated by 13 votes. Overton surveyed a new line that avoided Darlington's estate and agreement was reached with Eldon, but another application was deferred early in 1820, as the death of King George III had made it unlikely a bill would pass that parliamentary year. The promoters lodged
19398-448: The route ran parallel to the S&DR alongside the Yarm to Stockton Road. The S&DR was originally on the east side of the road, but the LNR built its line with four tracks on the other side of the road, leasing two to the S&DR for a rental of 1s a year. On 25 January 1853, the LNR and SD&R opened a joint station at Eaglescliffe with an island platform between the tracks, and one side
19557-456: The same gauge as the S&DR. The route of the Clarence Railway was afterwards amended to reach Samphire Batts, later known as Port Clarence , and traffic started in August 1833; by the middle of 1834 Port Clarence had opened and 28 miles (45 km) of line was in use. The S&DR charged the 2 + 1 ⁄ 4 d per ton per mile landsale rate for coal it carried the 10 miles (16 km) from
19716-488: The saving using locomotives was 30 per cent. Young also showed that Pease and Richardson were both concerned about their investment in the Newcastle works and Pease unsuccessfully tried to sell his share to George Stephenson. New locomotives were ordered from Stephenson's, but the first was too heavy when it arrived in February 1828. It was rebuilt with six wheels and hailed as a great improvement, Hackworth being told to convert
19875-501: The scheme. Introduced in 1886, it was the first successful engine of its type in the United Kingdom. The quality of his mechanical engineering has lasted. Used to join the tubulars of offshore oil platforms, the design in cast steel represented a significant milestone for both the development of casting technology and offshore structures. Ashby Road Tamworth Staffordshire B79 0BU In recognition of James Watt's improvements to
20034-509: The second time in 5 years. The company is expected to continue operations normally, while its non-core operations will wind down. A collection of Harland & Wolff papers are held at Public Record Office of Northern Ireland (PRONI). The Harland & Wolff archive in PRONI comprises c.2,000 files, c.200 volumes and c.16,000 documents, 1861–1987, documenting most aspects of the history of Belfast's famous shipbuilding firm. A further major archive
20193-471: The section east of Annfield, and in the western section inclines were worked by stationary engines or gravity, with horses hauling waggons over level track. The lime kilns and the line between Stanhope and Carrhouse closed in 1840, and with the Stanhope to Annfield section losing money, the insolvent railway company was dissolved on 5 February 1841. The northern section became the Pontop and South Shields Railway and
20352-567: The shipyard to build much larger post-war merchant ships, including one of 333,000 tonnes. The shipyard had a long-standing reputation as a Protestant closed shop, and in 1970, during the Troubles , 500 Catholic workers were expelled from their role. Continuing financial problems led to the company's nationalisation , though not as part of British Shipbuilders , in 1977. In 1971, the Arrol Gantry complex, within which many ships were built until
20511-411: The size of ships was limited by the depth of the Tees. A branch from Stockton to Haverton, on the north bank of the Tees, was proposed in 1826, and the engineer Thomas Storey proposed a shorter and cheaper line to Middlesbrough , south of the Tees in July 1827. Later approved by George Stephenson, this plan was ratified by the shareholders on 26 October. The Tees Navigation Company was about to improve
20670-494: The southern section from Stanhope to Carrhouse was bought by the newly formed Derwent Iron Company at Consett, renamed the Wear & Derwent Railway , and used to transport limestone from quarries in the Stanhope area to its works at Consett. The Weardale Extension Railway ran from Waskerley on the Wear & Derwent to Crook on the BA&;WR and included the Sunniside Incline worked by
20829-451: The steam engine. ‘Old Bess’ was built by Boulton and Watt in 1777 and used to power their Soho Manufactory until 1848. This engine was the precursor of much of the power-generating plant on show in the Museum and is the oldest surviving of Watt's engines. Engine No. 6 (known as The William Prescott) is the largest working steam engine in the World. Powering the last steam driven weaving mill in
20988-448: The time he retired in 1832. When the treasurer Jonathan Backhouse retired in 1833 to become a Quaker minister, he was replaced by Joseph Pease. On 13 October 1835, the York and North Midland Railway (Y&NMR) was formed to connect York to London by a line to a junction with the planned North Midland Railway . Representatives of the Y&;NMR and S&DR met two weeks later and formed
21147-560: The time the 43 miles (69 km) from Croft to York received permission on 12 July the following year. In August a general meeting decided to start work on the southern section, but construction was delayed, and after several bridges collapsed the engineer Thomas Storey was replaced by Robert Stephenson. The S&DR sold its Croft branch to the GNER, and the railway opened for coal traffic on 4 January 1841 using S&DR locomotives. The railway opened to passengers with its own locomotives on 30 March. Between November 1841 and February 1842,
21306-488: The town and was subsequently looking for ways to increase trade to recoup those costs. A few years later, a canal was proposed on a route that bypassed Darlington and Yarm, and a meeting was held in Yarm to oppose the route. The Welsh engineer George Overton was consulted, and he advised building a tramroad. Overton carried out a survey and planned a route from the Etherley and Witton Collieries to Shildon , and then passing to
21465-479: The town, with gardens and Zetland Hotel by the station, and bought a house at 5 Britannia Terrace, where he stayed for a few weeks every summer. The extension opened in 1861, a station on the through line replacing the terminus at Redcar. A railway to serve Barnard Castle , from the S&DR at a junction near North Road station and along the River Tees, was proposed in 1852; this route bypassed as far as possible
21624-401: The track had been upgraded with rails weighing 64 lb/yd (32 kg/m). The railway had about 30 steam locomotives, most of them six coupled , that ran with four-wheeled tenders with two water butts, each capable of holding 600 imperial gallons (2,700 L; 720 US gal) of water. The line descended from Shildon to Stockton, assisting the trains that carried coal to the docks at
21783-417: The traffic with 19 locomotives, but travelled at different speeds, so to help regulate traffic horse-drawn trains were required to operate in groups of four or five. This had led to horses, startled by a passing locomotive and coming off their dandy cart, being run down by the following train. On one occasion a driver fell asleep in the dandy cart of the preceding train and his horse, no longer being led, came to
21942-413: The train left carrying between 450 and 600 people, most travelling in empty waggons but some on top of waggons full of coal. Brakesmen were placed between the waggons, and the train set off, led by a man on horseback with a flag. It picked up speed on the gentle downward slope and reached 10 to 12 miles per hour (16 to 19 km/h), leaving behind men on field hunters (horses) who had tried to keep up with
22101-466: The unsuccessful Chittaprat to build the Royal George in the works at Shildon; it started work at the end of November. John Wesley Hackworth later published an account stating that locomotives would have been abandoned were it not for the fact that Pease and Thomas Richardson were partners with Stephenson in the Newcastle works, and that when Timothy Hackworth was commissioned to rebuild Chittaprat it
22260-478: The verification of details being submitted. The Award plaque was also redesigned (see below). Since 1984, the plaques presented to EHHS and EHA recipients have changed four times. The original plaque was a blue ceramic disc approximately 40 cm in wide. This was replaced in the 1990s by a rectangular steel plate mounted on a wooden base. With the launch of the Engineering Heritage Awards in 2008,
22419-403: The volume of imports and exports and work started in 1839 on Middlesbrough Dock, which had been laid out by William Cubitt , capable of holding 150 ships, and built by resident civil engineer George Turnbull . The suspension bridge across the Tees was replaced by a cast iron bridge on masonry piers in 1841. After three years and an expenditure of £122,000 (equivalent to £9.65m at 2011 prices),
22578-402: The waggons split into groups of four linked by a 9-yard-long (8.2 m) chain. For the opening ceremony on 27 December 1830, "Globe", a new locomotive designed by Hackworth for passenger trains, hauled people in carriages and waggons fitted with seats across the bridge to the staiths at Port Darlington, which had berths for six ships. Stockton continued to be served by a station on the line to
22737-645: The west coast in Cumberland and Lancashire . In the early 1850s, this ore was travelling the long way round over the Newcastle & Carlisle Railway to the Barrow-in-Furness area, and Durham coke was returning. Both the South Durham & Lancashire Union Railway (SD&LUR) and the Eden Valley Railway (EVR) companies were formed on 20 September 1856. Taking advantage of the new railway at Barnard Castle,
22896-542: The workers could be paid. By August 1827 the company had paid its debts and was able to raise more money; that month the Black Boy branch opened and construction began on the Croft and Hagger Leases branches. During 1827 shares rose from £120 at the start to £160 at the end. The line was initially used to carry coal to Darlington and Stockton, carrying 10,000 tons in the first three months and earning nearly £2,000. In Stockton,
23055-405: The world This horizontal tandem compound condensing engine was built by W Roberts and Sons of Nelson in 1894 and powered the mill until Queen Street Manufacturing Company closed down in 1982. Now 'Peace' is preserved and can be seen working in her original location. Launched in 1938 at Harland & Wolff , the only surviving major Royal navy warship from WWII. Four 20,000 hp steam turbines,
23214-543: The world's first volunteer operated preserved railway. At 7.25 miles long and with a gauge of 2 feet and 3 inches, the Talyllyn Railway is an important part of Welsh industrial heritage. Willans Works, Newbold Road, Rugby. CV21 2NH Moved in 2017 to the Internal Fire – Museum of Power in West Wales. Central Valve Steam Engine Willans & Robinson Built in 1901 at Rugby, this 140 hp three crank compound engine
23373-410: The yard included the tanker Myrina , which was the first supertanker built in the UK and the largest vessel ever launched down a slipway, as it was in September 1967. In the same period the yard also built the semi-submersible drilling rig Sea Quest which, due to its three-legged design, was launched down three parallel slipways. This was a first and only time this was ever done. In the mid-1960s,
23532-402: Was "as a last experiment" to "make an engine in his own way". Both Tomlinson and Rolt state this claim was unfounded and the company had shown earlier that locomotives were superior to horses, Tomlinson showing that coal was being moved using locomotives at half the cost of horses. Robert Young states that the company was unsure as to the real costs as they reported to shareholders in 1828 that
23691-606: Was announced that Harland & Wolff had won the contract to refurbish SS Nomadic , effectively rekindling its nearly 150-year association with the White Star Line. Structural steel work on the ship began on 10 February 2011 and was completed in time for the 2012 Belfast Titanic Festival. In July 2012 Harland & Wolff was to carry out the dry docking and service of the Husky Oil SeaRose FPSO (Floating Production, Storage and Offloading) vessel. Belfast's skyline
23850-540: Was attached and horses hauled the train across the Gaunless Bridge to the bottom of Brusselton West Bank , where thousands watched the second stationary engine draw the train up the incline. The train was let down the East Bank to Mason's Arms Crossing at Shildon Lane End, where Locomotion No. 1 , Experiment and 21 new coal waggons fitted with seats were waiting. The directors had allowed room for 300 passengers, but
24009-492: Was in service for 57 years. Willans engines ran at 350 to 500rpm and could be direct-coupled to generators. In 1892 they accounted for 68% of all electricity generated in Britain, dominating this market until the advent of steam turbines. Jaguar E-type Designed by Malcolm Sayer under the direction of Sir William Lyons (HonFIMechE) the Jaguar E-type is a direct descendant of the cars which won five Le Mans 24 hour races during
24168-498: Was opened for freight on 23 May 1859 and for passenger traffic on 4 July 1859. The Middlesbrough & Redcar Railway , a short extension to Redcar, received permission on 21 July 1845 in the Middlesbrough and Redcar Railway Act 1845 ( 8 & 9 Vict. c. cxxvii). The line branched off before the Middlesbrough terminus, which was closed and a new through station opened with the line on 4 June 1846. Also authorised in July 1845, by
24327-475: Was powered by a 160 hp petrol engine and had a surface speed of 8 knots. A 70 hp electric motor gave a submerged speed of 7 knots. Holland 1 was the Royal Navy's first operational submarine. 1671 to 1967 The Royal Arsenal produced much of the armaments required by this country during the growth of the British Empire and through two World Wars. Many important mechanical innovations were developed by
24486-434: Was presented unchanged to Parliament in 1842, and was opposed by the S&DR. Despite this, the Newcastle and Darlington Junction Railway Act 1842 ( 5 & 6 Vict. c. lxxx) received royal assent on 18 June 1842, and a second act of Parliament the following year, the Great North of England Railway Act 1843 ( 6 & 7 Vict. c. viii), secured the deviations from the GNER route in the south recommended by Stephenson. After
24645-533: Was reduced during a period of financial difficulty and the Black Boy colliery switched to sending its coal to Hartlepool. No dividend was paid in 1848 and the next few years; lease payments were made out of reserves. The S&DR announced a bill in November 1848 to permit a lease by and amalgamation with the YN&;BR, but this was withdrawn after the YN&BR share price crashed and its chairman Hudson resigned after questions were raised about his share dealings. In 1850
24804-542: Was single track with four passing loops each mile; square sleepers supported each rail separately so that horses could walk between them. Stone was used for the sleepers to the west of Darlington and oak to the east; Stephenson would have preferred all of them to have been stone, but the transport cost was too high as they were quarried in the Auckland area. The railway opened with the company owing money and unable to raise further loans; Pease advanced money twice early in 1826 so
24963-534: Was the second offshore wind farm assembled by the company for Vestas having completed the logistics for the Barrow Offshore Wind Farm in 2006. In August 2011 Harland and Wolff completed the logistics for the Ormonde Wind Farm which consisted of 30 REpower 5MW turbines. In March 2008, the construction of the world's first commercial tidal stream turbine, for Marine Current Turbines, was completed at
25122-464: Was used by S&DR trains and the other by the LNR. Rather than allow trains to approach the platform line from either direction, the Board of Trade inspecting officer ruled that trains approaching on a line without a platform must first pass through and then reverse into the platform line. The Middlesbrough & Guisborough Railway, with two branches into the iron-rich hills, was approved by Parliament in
25281-460: Was withdrawn on 29 June 1953 and services north of Crook on 11 June 1956. Harland %26 Wolff Harland & Wolff is a British shipbuilding and fabrication company headquartered in London with sites in Belfast , Arnish , Appledore and Methil . It specialises in ship repair , shipbuilding and offshore construction . Harland & Wolff is famous for having built the majority of
#695304