Misplaced Pages

#832167

33-419: The Hayling Seaside Railway , formerly East Hayling Light Railway , is a 2 ft ( 610 mm ) narrow gauge railway on Hayling Island , Hampshire , England . It is mainly a diesel operated railway, though from time to time the railway hires steam locomotives from other narrow gauge railways. It operates passenger trains between Beachlands and Eastoke Corner. The Hayling Seaside Railway began life as

66-575: A new depot at Eastoke Corner as the lease on the depot at Beachlands had run out. As of February 2018, the railway runs out of the new Eastoke Corner depot. In September 2019, the owners (Mr & Mrs Haddock) put the business up for sale by lease or outright purchase, in regard to their wishes to retire and travel. 50°46′53″N 0°58′00″W  /  50.7815°N 0.9668°W  / 50.7815; -0.9668 2 ft and 600 mm gauge railways Most of these lines are tourist lines, which are often heritage railways or industrial lines, such as

99-581: A site was found within the Mill Rythe Holiday Camp where the EHLR was constructed and ran successfully for many years. Havant Council took the step of including a railway in their draft plan for Hayling's popular Pleasure Beach. Haddock submitted a plan for a narrow gauge railway to meet the Council's criteria, but the council refused planning permission. After a campaign lasting over 12 years, permission to build

132-477: The 1 ft  11 + 3 ⁄ 4  in ( 603 mm ) gauge Brecon Mountain Railway . South African Class NG15 2-8-2 The South African Railways Class NG15 2-8-2 is a class of narrow-gauge steam locomotives. In 1931, three narrow-gauge Class NG15 locomotives with a 2-8-2 Mikado type wheel arrangement, similar in design to the existing Class Hd and Class NG5 locomotives, were acquired by

165-638: The Brecon Mountain Railway in the United Kingdom and was loaded on a road rig for transport to Durban Harbour on 17 September 2001. In 1973, steam traction in the Langkloof began to be replaced by diesel-electric power upon the introduction of the General Electric -built Class 91-000 type GE UM6B diesel-electric locomotive. Diesel and steam served the Langkloof together for some years, but by

198-586: The Cape gauge Class 6 and Class 7 . Unlike the Class Hd and Class NG5 locomotives, their leading wheels were mounted in a Krauss-Helmholtz Bissel truck which was arranged in front instead of to the rear of the cylinders. The leading pair of coupled wheels of the Class NG15 had a limited amount of sideplay and were linked to the leading Bissel truck, while the axle of the leading coupled wheels still remained parallel to

231-743: The Eastern Cape for further service on the narrow-gauge line from Port Elizabeth to Avontuur . As a result of heavy traffic demands on the Otavi Railway in South West Africa (SWA), three additional locomotives were ordered in 1931. The Class NG15 2-8-2 Mikado type narrow-gauge steam locomotive was designed by the South African Railways (SAR) and built by Henschel and Son for the Otavi Mining and Railway Company. The company operated

264-731: The Ffestiniog Railway in Wales and the Cripple Creek and Victor Narrow Gauge Railroad in Colorado . World War I trench railways produced the greatest concentration of 600 mm ( 1 ft  11 + 5 ⁄ 8  in ) gauge railways to date. In preparation for World War II , the French Maginot Line and Alpine Line also used 600 mm ( 1 ft  11 + 5 ⁄ 8  in ) gauge railways for supply routes to

297-854: The Langkloof line to Avontuur. The first one was offloaded in Port Elizabeth in April 1961, still equipped with a single central buffer and side chains , the preferred drawgear on the ex-German lines in SWA. Their arrival increased the number of locomotives on the Avontuur Railway from a total of 23 in March 1961 to 43 by July. As a result, all but one of the Class NG10 as well as Class NG G11 no. 51, South Africa’s first Garratt , were withdrawn from service by July 1962. On

330-573: The South African Class NG15 2-8-2 locomotives started their career on the 600 mm ( 1 ft  11 + 5 ⁄ 8  in ) gauge. The Otavi Mining and Railway Company in South West Africa (now Namibia ) were transferred to the 2 ft gauge railways in South Africa and currently some surviving locomotives reside in Wales on the 1 ft  11 + 1 ⁄ 2  in ( 597 mm ) gauge Welsh Highland Railway and

363-506: The 352-mile long (566-kilometre) narrow-gauge Otavi Railway across the Namib Desert from Swakopmund on the Atlantic coast to Tsumeb and Grootfontein in northern SWA. The first three locomotives were delivered in 1931, numbered in the range from NG17 to NG19. They were followed by three more in 1939, numbered in the range from NG117 to NG119. Ten more of these locomotives were built for

SECTION 10

#1733084935833

396-502: The Avontuur Railway, the Class NG15 was nicknamed Kalahari , inappropriately so since its previous stamping ground was across the Namib desert to the west of the Kalahari . Garratts initially continued to operate in the Langkloof since the Class NG15 was not allowed to work beyond Humansdorp from Port Elizabeth because of a lack of turning facilities, the only existing triangle at the time being

429-446: The Class Hd, Class NG5 and Class NG15 Mikado locomotives operated in a common pool. They were the most powerful non-articulated narrow-gauge steam locomotives in SAR service. In 1960, when all the SWA narrow-gauge lines were widened to Cape gauge, the Class Hd and Class NG5 locomotives were withdrawn from service while the 21 Class NG15 locomotives were all shipped to Port Elizabeth for use on

462-570: The Class NG15 with its spacious cab soon became the enginemen’s favourites. They were free-steaming and fast and there was little difference in hauling capacity between the two types. The Class NG15s and their crews were soon doing round trips of just over 200 miles (322 kilometres) in one shift to Assegaaibos and back, unheard of in the Garratt days. In the fruit season the Kalaharis regularly logged more than 3,000 miles (4,828 kilometres) per month. During

495-511: The Class NG5 locomotive, the sharpest curves on the Avontuur line had been eased and the experience gained in the process was taken into consideration during the design of the Class NG15. Like the Class NG5, the locomotives were built on plate frames and their valves were actuated by Walschaerts valve gear , but they were fitted with piston valves instead of flat slide valves. While the sand boxes of

528-404: The Class NG5 with a working order weight of 31 long tons 4 hundredweight (31,700 kilograms), compared to the 25 long tons 11 hundredweight 3 quarters (26,000 kilograms) of the Class NG5's tender. The tenders had low-slung sides, with the bottom part of the water tank extending down to below axle level on either side of the tender bogies to lower the vehicle's roll centre on

561-580: The East Hayling Light Railway (EHLR), formed by Bob Haddock, a member of the society who in the mid-1980s attempted to reinstate the "Hayling Billy" Line . Havant Borough Council had already decided to turn the disused railway line into a cycle-way and footpath which precluded any chance of rebuilding the line as standard gauge, the option preferred by the committee of the society. Some members including Haddock decided to create their own railway elsewhere on Hayling Island and after numerous setbacks,

594-605: The Otavi line by Société Franco-Belge and delivered in two batches of five in 1950 and 1953, numbered in the ranges from NG120 to NG124 and NG132 to NG136 respectively. In 1958, five more of these locomotives, built by Henschel and numbered in the range from TC1 to TC5, were delivered to the Tsumeb Copper Corporation for use by the SAR in terms of an agreement between the SAR and the Corporation. They were later renumbered in

627-579: The SAR range from NG144 to NG148. The Class NG15 2-8-2 locomotive was a development of the Class Hd and Class NG5 locomotives which had been acquired for the Otavi Mining and Railway Company in SWA in 1912 and 1921 respectively. In the 1920s, one of the Class NG5 locomotives was sent to the Avontuur Railway in South Africa for trials, but since it jammed on the tighter curves in the Langkloof despite having one set of flangeless coupled wheels , it

660-685: The South African Railways for the Otavi Mining and Railway Company in South West Africa . More were purchased for the Otavi Railway and the Tsumeb Copper Corporation during the subsequent years, eventually bringing the total number of these locomotives to 21 by 1958. When the narrow-gauge Otavi Railway was regauged to Cape gauge in 1960, all 21 locomotives were taken over by the South African Railways. They were transferred to

693-467: The end of 1986, preparations commenced to celebrate the 80th anniversary of the opening of the Apple Train line to Avontuur on 1 January 1907. Numbers NG122 and NG124 were repainted at Humewood diesel depot in red and green respectively and no. NG122 was fitted with a headboard with an apple logo. The red no. NG122 was named Starking after the red apple variety grown in the Langkloof and the green no. NG124

SECTION 20

#1733084935833

726-561: The engine on 11 April 2003 and the tender on 18 July 2003. No. NG146 appeared to be staged out of use until late April 1992, when it was found being repaired. It re-entered traffic on the ACR’s Izotsha trains on the Harding line before the end of May 1992. After a triangle was installed at Paddock in June 1994 it was also able to work Paddock trains. The locomotive was eventually sold by its owner to

759-536: The fixed border defenses. Australia has over 4,000 kilometres (2,500 mi) of 2 ft ( 610 mm ) gauge sugar cane railway networks in the coastal areas of Queensland , which carry more than 30 million tonnes of sugar cane a year. Many 2 ft ( 610 mm ) gauge and 600 mm ( 1 ft  11 + 5 ⁄ 8  in ) gauge railways are used in amusement parks and theme parks worldwide. The interchange of rolling stock between these similar track gauges occasionally occurred; for example,

792-702: The last years of steam traction on the Avontuur Railway, the Class NG15 was the only non-Garratt steam locomotive working in the Langkloof. Outside the apple season, the Class NG15 became well known for hauling the Apple Express from the Humewood Road railway station in Port Elizabeth to Loerie and back every Saturday to cater for tourists. It gained further fame when the Apple Express instituted an annual train race marathon, where athletes could compete against an Apple Express train filled with spectators. Towards

825-552: The late 1980s road transport had triumphed over rail transport on the apple route as well and the narrow-gauge steam fleet was withdrawn from service. Engine no. NG147, the last Kalahari , was plinthed next to the now unused Avontuur Station while the red no. NG122 Starking is on display at the Outeniqua Transport Museum in George . The builders, works numbers and SAR renumbering of the Class NG15 locomotives are listed in

858-405: The narrow track gauge. The original tenders were built as flat-sided box-shaped vehicles. A second tender version was delivered with the later batches of locomotives, with the coal bunker sides set inward for reasons unknown. The new shape made no difference to the crew's rearward field of vision and the only likely benefit was a reduced axle load as a result of the reduced coal capacity. In SWA,

891-436: The older locomotives were mounted on top of the boiler, aft of the dome on the Class Hd and ahead of the dome on the Class NG5, those of the Class NG15 were arranged on the running boards. The seats of the driver and stoker were mounted on poles which allowed them to be swung around to outside the cab and crews could often be seen riding outside in hot weather. Similar swing-seats were used on the SAR's narrow-gauge Garratts and on

924-478: The one at the end of the line at Avontuur. More turning facilities had not been required until then since the Langkloof had for years been the domain of bi-directional Garratt locomotives. During 1963-1964, turning facilities were installed at Assegaaibos, Louterwater and Misgund . From then on the use of Garratts west of Assegaaibos was confined mainly, but not entirely, to the daily transship and pick-up (T&P) workings. Even though Garratts were still present,

957-677: The other three coupled axles at all times. This linking of a pony truck and coupled axle is known as a Krauss-Helmholtz bogie , an invention of Richard von Helmholtz who was the chief designer at the Krauss works in Munich from 1884 to 1917. On standard-gauge railways in Europe , the inclusion of a Krauss-Helmholtz bogie has allowed the use of large 2-10-0 locomotives on sharply curved mountain sections. Some early electric locomotives also used Krauss-Helmholtz bogies. The Class NG15 had larger tenders than

990-618: The railway was granted, but only after the Council's decision was overturned by the Department of the Environment. Following the closure of the EHLR at Mill Rythe, work started in October 2001 on the building of Beachlands Station on land leased from the neighbouring Funland Amusement Park. Work continued through 2002 and into 2003 and the line finally opened to passengers on 5 July 2003 , re-christened as "The Hayling Seaside Railway". As of 2006 there

1023-470: Was a mile of track in place and it was planned to extend it to the ferry terminal connecting the island with Portsmouth so providing a useful transport link. However, in 2015 the Portsmouth to Hayling ferry was withdrawn from operation due to the owners becoming bankrupt so this extension looks doubtful. In the early part of 2015, after a lengthy period of campaigning for the local authority work started on

Hayling Seaside Railway - Misplaced Pages Continue

1056-601: Was named Granny Smith after the green apples that finished off each season. In 1990, numbers NG19 and NG146 were sold to private individuals and relocated to the Alfred County Railway (ACR) at Port Shepstone in Natal. No. NG19 was stored in poor condition, amongst others without a cab and chimney, and was never used by the ACR. It is believed the owner sold it to or came to an arrangement with Sandstone Estates who collected

1089-401: Was returned to SWA. The usual practice of the SAR in the steam era was to design locomotives in their own drawing offices and to then go out and find a builder. The drawing board work for the Class NG15 has been attributed to a Chief Mechanical Engineer of the Otavi Railway, a German engineer known in SWA as Mr. Peters, who was employed as a draughtsman by the SAR. Since the earlier trials with

#832167