Misplaced Pages

#979020

68-647: Dune Park is a station in Westchester Township, Porter County, Indiana , located north of the municipalities of Chesterton and Porter . It is used by South Shore Line trains, and serves as the headquarters of the Northern Indiana Commuter Transportation District (NICTD), the umbrella agency that operates the South Shore Line. It is located at the intersection of U.S. Highway 12 and Indiana State Road 49 . Dune Park

136-404: A bar or pub . Other station facilities may include: toilets , left-luggage , lost-and-found , departures and arrivals schedules , luggage carts, waiting rooms , taxi ranks , bus bays and even car parks . Larger or staffed stations tend to have a greater range of facilities including also a station security office. These are usually open for travellers when there is sufficient traffic over

204-406: A bypass line, used by freight trains that do not need to stop at the terminus. Some termini have a newer set of through platforms underneath (or above, or alongside) the terminal platforms on the main level. They are used by a cross-city extension of the main line, often for commuter trains , while the terminal platforms may serve long-distance services. Examples of underground through lines include

272-404: A few intermediate stations that take the form of a stub-end station, for example at some zigzags . If there is a station building , it is usually located to the side of the tracks. In the case of intermediate stations used for both passenger and freight traffic, there is a distinction between those where the station building and goods facilities are on the same side of the tracks and those in which

340-472: A few small railway stations are designated as "halts" ( Irish : stadanna , sing. stad ). In some Commonwealth countries the term "halt" is used. In Australia, with its sparse rural populations, such stopping places were common on lines that were still open for passenger traffic. In the state of Victoria , for example, a location on a railway line where a small diesel railcar or railmotor could stop on request, allowing passengers to board or alight,

408-794: A further 40 from other companies at the Grouping of 1923. Peak building periods were before the First World War (145 built) and 1928–1939 (198 built). Ten more were opened by British Rail on ex-GWR lines. The GWR also built 34 "platforms". Many such stops remain on the national railway networks in the United Kingdom, such as Penmaenmawr in North Wales , Yorton in Shropshire , and The Lakes in Warwickshire , where passengers are requested to inform

476-418: A larger project to double track the South Shore Line between Gary and Michigan City , some improvements took place at Dune Park between 2021 and 2024. Unlike several other stations on the line which saw major improvements, the improvements at Dune Park were relatively minor since the station already had two tracks and a high-level platform. The main improvement was repurposing the northern track, which prior to

544-483: A layer of coal dust covering them and the bed". Another key requirement of the steam engine is a supply of water which is carried in the tenders or tanks of the engines. In Australia, water was also carried in water gins (a water tank mounted on a wagon) due to longer distances covered and scarcer water resources. In depots where the limescale content of water was high (known in some areas as ‘Hard Water'), water softening plants were introduced. At Norwich engine shed in

612-571: A line was dual-purpose there would often be a freight depot apart from the passenger station. This type of dual-purpose station can sometimes still be found today, though in many cases goods facilities are restricted to major stations. Many stations date from the 19th century and reflect the grandiose architecture of the time, lending prestige to the city as well as to railway operations. Countries where railways arrived later may still have such architecture, as later stations often imitated 19th-century styles. Various forms of architecture have been used in

680-533: A locomotive the engine had to be balanced quite precisely on the turntable and it could then be literally pushed around. Some turntables could be powered by fixing the vacuum brake of the engine to the turntable and using that to turn the engine. Later turntables were electrically operated. Many diesel locomotives in the UK have a cab at each end removing the need for the turntables. However, in Australia and America, there are

748-407: A long enough period of time to warrant the cost. In large cities this may mean facilities available around the clock. A basic station might only have platforms, though it may still be distinguished from a halt , a stopping or halting place that may not even have platforms. Many stations, either larger or smaller, offer interchange with local transportation; this can vary from a simple bus stop across

SECTION 10

#1733092797980

816-504: A member of on-board train staff if they wish to alight, or, if catching a train from the station, to make themselves clearly visible to the driver and use a hand signal as the train approaches. Most have had "Halt" removed from their names. Two publicly advertised and publicly accessible National Rail stations retain it: Coombe Junction Halt and St Keyne Wishing Well Halt . A number of other halts are still open and operational on privately owned, heritage, and preserved railways throughout

884-663: A new through-station, including the cases of Berlin Hauptbahnhof , Vienna Hauptbahnhof and numerous examples throughout the first century of railroading. Stuttgart 21 is a controversial project involving the replacement of a terminus station by a through-station. An American example of a terminal with this feature is Union Station in Washington, DC , where there are bay platforms on the main concourse level to serve terminating trains and standard island platforms one level below to serve trains continuing southward. The lower tracks run in

952-536: A number of shunting locomotives. Normally 0-4-0T or 0-6-0T tank engines, they would be allocated to shunting duties in goods yards, carriage sidings, goods depots and docks. Many large rail connected industrial sites also had engine sheds, primarily using shunting locomotives. Each railway company had its own architectural design of engine shed, but there were three basic designs of shed: The turntables for straight and dead end sheds were generally outside. Those in roundhouses could be inside, such as those at York in

1020-426: A number of single ended locomotives and turntables are still in use. Engine sheds would carry out basic maintenance and the bigger sheds would carry out more complex repairs. Locomotives that required further repair were sent to the company's locomotive works. Withdrawn locomotives could often be found at some depots before their final trips to the scrapyard. In the UK, the general practice is that one shed would have

1088-485: A number of smaller sub-sheds where there were fewer facilities. When engines allocated to sub-sheds required repairs, they were often exchanged for a similar engine or perhaps just visiting the main depot on a Sunday when traffic levels were considerably lower. In terms of locomotive allocation, it seems to have been the practice that for some railways locomotives were all allocated to the main shed but in others each shed had its specific allocation of locomotives. A list of

1156-407: A spot at the station to board and disembark trains is called station track or house track regardless of whether it is a main line or loop line. If such track is served by a platform , the track may be called platform track. A loop line without a platform, which is used to allow a train to clear the main line at the station only, is called passing track. A track at the station without a platform which

1224-417: A station and various other features set certain types apart. The first is the level of the tracks . Stations are often sited where a road crosses the railway: unless the crossing is a level crossing , the road and railway will be at different levels. The platforms will often be raised or lowered relative to the station entrance: the station buildings may be on either level, or both. The other arrangement, where

1292-576: A station stop does not. A station stop usually does not have any tracks other than the main tracks, and may or may not have switches (points, crossovers). An intermediate station does not have any other connecting route, unlike branch-off stations , connecting stations, transfer stations and railway junctions . In a broader sense, an intermediate station is generally any station on the route between its two terminal stations . The majority of stations are, in practice, intermediate stations. They are mostly designed as through stations ; there are only

1360-405: A station track as a temporary storage of a disabled train. A "terminus" or "terminal" is a station at the end of a railway line. Trains arriving there have to end their journeys (terminate) or reverse out of the station. Depending on the layout of the station, this usually permits travellers to reach all the platforms without the need to cross any tracks – the public entrance to the station and

1428-405: A three-way junction and platforms are built on all three sides, for example Shipley and Earlestown stations. In a station, there are different types of tracks to serve different purposes. A station may also have a passing loop with a loop line that comes off the straight main line and merge back to the main line on the other end by railroad switches to allow trains to pass. A track with

SECTION 20

#1733092797980

1496-449: A train, sometimes consisting of a short platform and a waiting area but sometimes indicated by no more than a sign, are variously referred to as "stops", " flag stops ", " halts ", or "provisional stopping places". The stations themselves may be at ground level, underground, or elevated. Connections may be available to intersecting rail lines or other transport modes such as buses , trams , or other rapid transit systems. Train station

1564-636: A tunnel beneath the concourse and emerge a few blocks away to cross the Potomac River into Virginia. Terminus stations in large cities are by far the biggest stations, with the largest being Grand Central Terminal in New York City. Other major cities, such as London, Boston , Paris, Istanbul , Tokyo, and Milan have more than one terminus, rather than routes straight through the city. Train journeys through such cities often require alternative transport ( metro , bus , taxi or ferry ) from one terminus to

1632-464: Is Arbroath . Occasionally, a station serves two or more railway lines at differing levels. This may be due to the station's position at a point where two lines cross (example: Berlin Hauptbahnhof ), or may be to provide separate station capacity for two types of service, such as intercity and suburban (examples: Paris-Gare de Lyon and Philadelphia's 30th Street Station ), or for two different destinations. Stations may also be classified according to

1700-539: Is a comparatively new station, built in 1985 to serve as a regional commuter station and as NICTD's corporate headquarters. The station was designed to replace the South Shore's former nearby station at Tremont, Indiana , a location that was becoming depopulated with the expansion of the nearby Indiana Dunes National Lakeshore (now Indiana Dunes National Park ). The Dune Park station was built with substantial parking space to consolidate local commuter service, and in 1994

1768-455: Is any longer served by trains), or military base (such as Lympstone Commando ) or railway yard. The only two such "private" stopping places on the national system, where the "halt" designation is still officially used, seem to be Staff Halt (at Durnsford Road, Wimbledon) and Battersea Pier Sidings Staff Halt, both of which are solely for railway staff. In Portugal , railway stops are called halts ( Portuguese : apeadeiro ). In Ireland ,

1836-404: Is frequently, but not always, the final destination of trains arriving at the station. Especially in continental Europe, a city may have a terminus as its main railway station, and all main lines converge on it. In such cases all trains arriving at the terminus must leave in the reverse direction from that of their arrival. There are several ways in which this can be accomplished: There may also be

1904-576: Is the Bahnbetriebswerk or Bw , which has similar functions, with major repairs and overhauls being carried out at Ausbesserungswerke . The number of those was reduced drastically following the changeover from steam to diesel and electric traction, and most modern Bw in Germany are specialised depots, often responsible for a single locomotive class . Engine sheds could be found in many towns and cities, as well as in rural locations. They were built by

1972-507: Is the terminology typically used in the U.S. In Europe, the terms train station and railway station are both commonly used, with railroad being obsolete. In British Commonwealth usage, where railway station is the traditional term, the word station is commonly understood to mean a railway station unless otherwise specified. In the United States, the term depot is sometimes used as an alternative name for station , along with

2040-411: Is used for trains to pass the station without stopping is called through track. There may be other sidings at the station which are lower speed tracks for other purposes. A maintenance track or a maintenance siding, usually connected to a passing track, is used for parking maintenance equipment, trains not in service, autoracks or sleepers . A refuge track is a dead-end siding that is connected to

2108-611: The Shinkansen in Japan, THSR in Taiwan, TGV lines in France, and ICE lines in Germany. Stations normally have staffed ticket sales offices, automated ticket machines , or both, although on some lines tickets are sold on board the trains. Many stations include a shop or convenience store . Larger stations usually have fast-food or restaurant facilities. In some countries, stations may also have

Dune Park station - Misplaced Pages Continue

2176-961: The Thameslink platforms at St Pancras in London, the Argyle and North Clyde lines of Glasgow's suburban rail network , in Antwerp in Belgium, the RER at the Gare du Nord in Paris, the Milan suburban railway service 's Passante railway , and many of the numerous S-Bahn lines at terminal stations in Germany, Austria and Switzerland, such as at Zürich Hauptbahnhof . Due to the disadvantages of terminus stations there have been multiple cases in which one or several terminus stations were replaced with

2244-419: The 1950s and 1960s, the rise of manufacturing industry saw many staff leaving the railway for better working conditions (and pay) and many railways started to modernise as a result. The maintenance of the new diesel locomotives in filthy steam sheds soon proved difficult and, although some old sheds survived, many new diesel depots were built on new sites or on the sites of the old steam sheds. The major problem

2312-587: The British Isles. The word is often used informally to describe national rail network stations with limited service and low usage, such as the Oxfordshire Halts on the Cotswold Line . It has also sometimes been used for stations served by public services but accessible only by persons travelling to/from an associated factory (for example IBM near Greenock and British Steel Redcar – although neither of these

2380-449: The British sub-sheds can be found here . The drivers and fireman were the visible face of the engine shed and, as such, certain sheds had reputations for clean locomotives thanks to the dedication of those men. Many companies allocated a specific main line locomotive to a crew and they would usually take a personal interest in the cleanliness of their engine; some companies offered a prize to

2448-721: The National Park are accessible from the station on U.S. 12 and the Calumet Trail . The station is also adjacent to the Indiana Dunes State Park , which is accessible to the north via Indiana 49. Dune Park was also the name of a former section of the Indiana Dunes, between Ogden Dunes, Indiana and Dune Acres, that was physically leveled in the 1960s to create the Port of Indiana steelmaking and industrial complex. As part of

2516-473: The South Shore Line ceased to offer its traditional flag stop service to Dune Acres and Kemil Road , several miles west and east of Dune Park respectively. Users of these low-volume stops were instructed to instead use the consolidated Dune Park station. "Dune Park" is so called because it the station is physically surrounded by land owned by the Indiana Dunes National Park . Major units of

2584-582: The UK, or outside, such as that at the East Broad Top Railroad & Coal Company in Rockhill, Pennsylvania , USA. There were six primary activities that took place at sheds. When a steam engine arrived on shed, it would drop its fire and the ash that had built up would be removed. Disposal of the ash was a filthy job and carried out at quiet times, although some bigger depots had facilities for disposing of ash more efficiently. Study of photographs from

2652-400: The UK, the sludge was discharged into a tank and emptied every three years or so with the sludge being dumped into the sea at Lowestoft. Tender locomotives required turning so they were facing the right way before their next duty. In the early days, these were typically around 45 feet long. As the technology improved and engines got bigger, then the turntables got longer. In order to turn

2720-474: The compound forms train depot , railway depot , and railroad depot —it is used for both passenger and freight facilities. The term depot is not used in reference to vehicle maintenance facilities in the U.S., whereas it is used as such in Canada and the United Kingdom. The world's first recorded railway station, for trains drawn by horses rather than engined locomotives , began passenger service in 1807. It

2788-529: The construction of stations, from those boasting grand, intricate, Baroque - or Gothic -style edifices, to plainer utilitarian or modernist styles. Stations in Europe tended to follow British designs and were in some countries, like Italy, financed by British railway companies. Train stations built more recently often have a similar feel to airports, with a simple, abstract style. Examples of modern stations include those on newer high-speed rail networks, such as

Dune Park station - Misplaced Pages Continue

2856-602: The crew of the best kept engine. Many drivers would spend their own time on improving their knowledge and sharing best practice with younger drivers. The footplate staff (as drivers and fireman were known) were unionised from the 19th century and in the UK were generally in the ASLEF whilst other shed staff tended to be in the Amalgamated Society of Railway Servants (later National Union of Railwaymen ). Many engine shed workers put up with very poor conditions for many years. In

2924-484: The cross-loading of freight and may be known as transshipment stations, where they primarily handle containers. They are also known as container stations or terminals. Motive power depot A motive power depot ( MPD ) or locomotive depot , or traction maintenance depot ( TMD ), is where locomotives are usually housed, repaired and maintained. They were originally known as "running sheds", "engine sheds" or just "sheds". Facilities are provided for refuelling and

2992-470: The goods facilities are on the opposite side of the tracks from the station building. Intermediate stations also occur on some funicular and cable car routes. A halt , in railway parlance in the Commonwealth of Nations , Ireland and Portugal , is a small station, usually unstaffed or with very few staff, and with few or no facilities. In some cases, trains stop only on request , when passengers on

3060-401: The layout of the platforms. Apart from single-track lines, the most basic arrangement is a pair of tracks for the two directions; there is then a basic choice of an island platform between, two separate platforms outside the tracks ( side platforms ), or a combination of the two. With more tracks, the possibilities expand. Some stations have unusual platform layouts due to space constraints of

3128-417: The less developed KTM East Coast railway line to serve rural 'kampongs' (villages), that require train services to stay connected to important nodes, but do not have a need for staff. People boarding at halts who have not bought tickets online can buy it through staff on board. In rural and remote communities across Canada and the United States, passengers wanting to board the train at such places had to flag

3196-530: The loading and unloading of goods and may well have marshalling yards (classification yards) for the sorting of wagons. The world's first goods terminal was the 1830 Park Lane Goods Station at the South End Liverpool Docks. Built in 1830, the terminal was reached by a 1.24-mile (2 km) tunnel. As goods are increasingly moved by road, many former goods stations, as well as the goods sheds at passenger stations, have closed. Many are used purely for

3264-403: The main reception facilities being at the far end of the platforms. Sometimes the track continues for a short distance beyond the station, and terminating trains continue forward after depositing their passengers, before either proceeding to sidings or reversing to the station to pick up departing passengers. Bondi Junction , Australia and Kristiansand Station , Norway are examples. A terminus

3332-784: The other. For instance, in Istanbul transfers from the Sirkeci Terminal (the European terminus) and the Haydarpaşa Terminal (the Asian terminus) historically required crossing the Bosphorus via alternative means, before the Marmaray railway tunnel linking Europe and Asia was completed. Some cities, including New York, have both termini and through lines. Terminals that have competing rail lines using

3400-443: The outer walls constructed of dry blocks much in the style of a dry stone wall with smaller pieces behind these. As technology advanced and the bigger sheds got busier, this process became mechanised and huge coaling towers above the neighbourhoods indicated where the engine shed was. The sheds were not clean places to work. The large east London depot of Stratford had an engineman's dormitory and its occupants would "wake up with

3468-585: The platform indicate that they wish to board, or passengers on the train inform the crew that they wish to alight. These can sometimes appear with signals and sometimes without. The Great Western Railway in Great Britain began opening haltes on 12 October 1903; from 1905, the French spelling was Anglicised to "halt". These GWR halts had the most basic facilities, with platforms long enough for just one or two carriages; some had no raised platform at all, necessitating

SECTION 50

#1733092797980

3536-466: The provision of steps on the carriages. Halts were normally unstaffed, tickets being sold on the train. On 1 September 1904, a larger version, known on the GWR as a "platform" instead of a "halt", was introduced; these had longer platforms, and were usually staffed by a senior grade porter, who sold tickets and sometimes booked parcels or milk consignments. From 1903 to 1947 the GWR built 379 halts and inherited

3604-629: The railway companies to accommodate the locomotives that provided their local train services. Each engine shed would have an allocation of locomotives that would reflect the duties carried out by that depot. Most depots had a mixture of passenger, freight and shunting locomotives, but some, such as Mexborough , had predominantly freight locomotives, reflecting the industrial nature of that area in South Yorkshire . Others, such as Kings Cross engine shed in London, predominantly provided locomotives for passenger workings. Nearly all depots at that time had

3672-402: The renovation only existed as a siding and to allow freight trains to pass through the station without interference from the high-level platform. The improved station added a new low-level platform adjacent to the northern track while keeping the existing high-level platform adjacent to the southern track, but also added gauntlet track to the southern track to allow freight trains to pass through

3740-533: The replenishing of water, lubricating oil and grease and, for steam engines , the disposal of ash. There are often workshops for day-to-day repairs and maintenance, but locomotive building and major overhauls are usually carried out at locomotive works. (Note: In American English , the term depot is used to refer to passenger stations or goods (freight) facilities, not to vehicle maintenance facilities.) The equivalent of such depots in German-speaking countries

3808-405: The station entrance and platforms are on the same level, is also common, but is perhaps rarer in urban areas , except when the station is a terminus. Stations located at level crossings can be problematic if the train blocks the roadway while it stops, causing road traffic to wait for an extended period of time. Stations also exist where the station buildings are above the tracks. An example of this

3876-477: The station frequently set up a jointly owned terminal railroad to own and operate the station and its associated tracks and switching operations. During a journey, the term station stop may be used in announcements, to differentiate halts during which passengers may alight and halts for another reasons, such as a locomotive change . While a junction or interlocking usually divides two or more lines or routes, and thus has remotely or locally operated signals ,

3944-561: The station location, or the alignment of the tracks. Examples include staggered platforms, such as at Tutbury and Hatton railway station on the Crewe–Derby line , and curved platforms, such as Cheadle Hulme railway station on the Macclesfield to Manchester Line. Stations at junctions can also have unusual shapes – a Keilbahnhof (or "wedge-shaped" station) is sited where two lines split. Triangular stations also exist where two lines form

4012-480: The station on that track (rather than being limited to only using the northern track) without interference from the high-level platform. The new platform is accessible to passengers with disabilities using a mobile wheelchair lift but is only used occasionally, such as during service disruptions. During normal operations, all trains stop at the southern high-level platform. V-Line Train station Locations at which passengers only occasionally board or leave

4080-422: The steam era show it was not uncommon for piles of ash to be scattered around the depot site. After completing their last duty and arriving on shed, locomotives would have a regular boiler washout to remove scale, improve efficiency and protect safety. Locomotives generally ran on coal. Initially this job was done by hand and many depots had significant coal stacks on site. These would be neatly constructed with

4148-557: The street to underground rapid-transit urban rail stations. In many African, South American, and Asian countries, stations are also used as a place for public markets and other informal businesses. This is especially true on tourist routes or stations near tourist destinations . As well as providing services for passengers and loading facilities for goods, stations can sometimes have locomotive and rolling stock depots, usually with facilities for storing and refuelling rolling stock and carrying out minor repairs. The basic configuration of

SECTION 60

#1733092797980

4216-442: The train down to stop it, hence the name " flag stops " or "flag stations". Accessibility for disabled people is mandated by law in some countries. Considerations include: In the United Kingdom, rail operators will arrange alternative transport (typically a taxi ) at no extra cost to the ticket holder if the station they intend to travel to or from is inaccessible. Goods or freight stations deal exclusively or predominantly with

4284-602: The world was Crown Street railway station in Liverpool, England , built in 1830, on the locomotive-hauled Liverpool to Manchester line. The station was slightly older than the still extant Liverpool Road railway station terminal in Manchester. The station was the first to incorporate a train shed . Crown Street station was demolished in 1836, as the Liverpool terminal station moved to Lime Street railway station . Crown Street station

4352-575: Was The Mount in Swansea , Wales, on the Oystermouth (later the Swansea and Mumbles ) Railway. The world's oldest station for engined trains was at Heighington , on the Stockton and Darlington railway in north-east England built by George Stephenson in the early 19th century, operated by locomotive Locomotion No. 1 . The station opened in 1827 and was in use until the 1970s. The building, Grade II*-listed ,

4420-526: Was called a "rail motor stopping place" (RMSP). Usually situated near a level crossing , it was often designated solely by a sign beside the railway. The passenger could hail the driver to stop, and could buy a ticket from the train guard or conductor. In South Australia, such facilities were called "provisional stopping places". They were often placed on routes on which "school trains" (services conveying children from rural localities to and from school) operated. In West Malaysia , halts are commonplace along

4488-623: Was converted to a goods station terminal. The first stations had little in the way of buildings or amenities. The first stations in the modern sense were on the Liverpool and Manchester Railway , opened in 1830. Manchester's Liverpool Road Station , the second oldest terminal station in the world, is preserved as part of the Museum of Science and Industry in Manchester . It resembles a row of Georgian houses. Early stations were sometimes built with both passenger and freight facilities, though some railway lines were goods-only or passenger-only, and if

4556-514: Was in bad condition, but was restored in 1984 as an inn. The inn closed in 2017; in 2024 there were plans to renovate the derelict station in time for the 200th anniversary of the opening of the railway line. The two-storey Mount Clare station in Baltimore , Maryland , United States, which survives as a museum, first saw passenger service as the terminus of the horse-drawn Baltimore and Ohio Railroad on 22 May 1830. The oldest terminal station in

4624-458: Was the disposal of oil, which initially was left lying around causing pollution and safety issues. The new depots were equipped to deal with diesel fuel and the ability to access the underside, as well as upper body work, was improved. The tasks were not that much different in that diesel locomotives were fuelled rather than coaled, although they did require water as early diesels were equipped with steam generators for train heating purposes. Since

#979020