Misplaced Pages

#412587

63-611: He invented the Glehn system of compounding, and De Glehn types were built in large numbers in France, and were also built in smaller numbers in Belgium, Germany, New Zealand, and Russia, see Compound locomotive . Compounding lost favour from the 1900s, being replaced by superheating. However André Chapelon rebuilt many of the French De Glehn compounds from 1929 onwards. Alfred De Glehn was one of

126-536: A 4-cylinder compound rebuilt from an old British-built metre-gauge Pacific into a futuristic 4-8-0. Another historically important, albeit less numerous configuration also had its origins in France: the three-cylinder compound with two outside LP set at 90° fed by one HP cylinder between the frames with the crank set 135° from the others. It was first incorporated into a prototype for the French Nord Railway in 1887 to

189-565: A common crank, the latter system being much employed in the US in the early years of the 20th Century, notably on the Santa Fe. Jonathan Hornblower , the grandson of one of Newcomen 's engine erectors in Cornwall, patented a double-cylinder compound reciprocating beam engine in 1781. He was prevented from developing it further by James Watt , who claimed his own patents were infringed. A method to lessen

252-634: A large proportion of the German 4-cylinder compounds (such as the S 3/6), mostly on von Borries's later system. In spite of a sweeping standardisation policy by the Reichsbahn imposing simple expansion, a small but consequent number of Maffei Pacifics of a design dating from 1908 were nevertheless considered indispensable for hilly routes with severe axle load limitations and were built new as late as 1931. Livio Dante Porta in 1948 drew inspiration from Chapelon's 4700/240P rebuilds for "Argentina"; his first production,

315-463: A larger-volume low-pressure (LP) cylinder, (or two, - or more), thus extending the expansion part of the thermodynamic cycle . The cylinders can be said to work in "series" as opposed to the normal arrangement of a simple-expansion locomotive where they work in "parallel". In order to balance piston thrusts of a compound, the HP:LP cylinder volume ratio has to be carefully determined, usually by increasing

378-457: A new and curious design of compound engine, which first appeared on the Rete Adriatica 500 class express locomotive; it was notable for being an asymmetrical four-cylinder design, in which the two HP and the two LP cylinders were grouped together, with each couple being served by a single piston valve which admitted steam simultaneously to the opposite ends of the two cylinders. The prototype of

441-670: A number were also built in Germany and Belgium. Many gave long service: a 4-6-0 230.D  [ fr ] locomotive introduced 1909, stationed at Creil could often still be seen at the Gare du Nord, Paris in the late 1960s. Three of the 4-4-2 type were purchased by the Great Western Railway , one in 1903 and two slightly larger ones in 1905 under its Locomotive Superintendent George Jackson Churchward for use in comparative trials and were tested against his own designs. For comparison with

504-407: A rotary valve, called a lanterne allowing independent working or combinations of HP and LP groups. Most other systems employ starting valves of various kinds. Another criterion is whether the valve gears of the two groups are wholly independent or linked together in some way. These can be staggered with drive to more than one axle, in line concentrated on one axle or in tandem with HP and LP driving

567-559: A series of small 2-cylinder compound 0-4-2 tank locomotives for the Bayonne-Anglet-Biarritz Railway. These were entirely successful and worked for many years. Cross compound locomotives have a fundamental design issue, which is that if the HP cylinder is stopped "on center", the locomotive cannot start. To resolve this, all practical cross compound locomotives have some form of starting valve, which allows admission of HP steam into

630-676: A single rigid chassis that were never built, others with a rigid rear chassis on which the HP cylinders were mounted and an articulated LP front engine unit. The latter arrangement was adopted worldwide. The first application was a series of 600 mm gauge locomotives specially built by the Decauville Company for the Paris Exposition of 1889; the design was introduced to the North American railroading in 1900 with B&O No. 2400, and rapidly became popular there. US practice progressed to

693-522: A tandem compound has each pair of high- and low-pressure cylinders driving a common crosshead, connecting rod and crank; but unlike the Vauclain compound, the cylinders are mounted fore and aft of each other. The rear wall of the forward cylinder is usually the forward wall of the rear cylinder. The piston rod of the rear cylinder is connected to the crosshead in the usual way, but the forward cylinder may have its piston rod, or rods, in either of two forms: either

SECTION 10

#1733094076413

756-404: A type of steam engine where steam is expanded in two or more stages. The locomotive was only one application of compounding. Two and three stages were used in ships, for example. Compounding became popular for railway locomotives from the early 1880s and by the 1890s were becoming common. Large numbers were constructed, mostly two- and four-cylinder compounds, in Germany, Austria, Hungary, and

819-453: A whole range of 3-cylinder Sauvage compounds. The only one to come into existence was 242A 1, a 4-8-4 prototype rebuilt in 1946 from an unsuccessful 4-8-2 3-cylinder simple. 242A 1 was probably the most important compound locomotive of all time, capable of developing a remarkable 5,300 cylinder horsepower (4,000 kW) for an engine unit weighing just 145.6 metric tons. One of the most efficient steam locomotives ever built, coal consumption

882-427: Is an ongoing debate. There are many configurations, but two basic types can be defined, according to how HP and LP piston strokes are phased and hence whether the HP exhaust is able to pass directly from HP to LP (Woolf compounds) or whether pressure fluctuations necessitate an intermediate "buffer" space in the form of a steam chest or pipe known as a receiver (receiver compounds). The eternal problem with compounds

945-486: Is buried in St Gluvias Churchyard. He invented the compound steam engine in 1781 and patented it on 16 July in the same year. This type of engine has two cylinders, an evolution from the single low pressure, condensing engines of Newcomen and later Watt (who introduced the separate condenser), it introduced a high-pressure cylinder before the low-pressure cylinder. The principle is that the steam first expands in

1008-455: Is starting: for all cylinders to take their weight, it is advisable to have some way of short-circuiting the HP cylinders and getting steam at a reduced pressure directly to the LP cylinders; hence many of the patented compound systems are associated with particular starting arrangements. The de Glehn 4-cylinder system is probably still the most sophisticated of all with independent HP & LP cut-off and

1071-415: Is that, if the engine is worked on a short cutoff, the steam is fully expanded in the HP cylinder and does no work in the LP cylinder, which causes unequal stresses in the engine. This problem is avoided if the engine has 3 or 4 cylinders, which was an element driving the development of the following types. Mallet also worked out schemes for compounds with independent divided drive for HP and LP, some with

1134-580: The FS Class 680 express locomotives and the FS Class 470 heavy freight locomotives, but no further application was approved after the widespread adoption of the superheater . André Chapelon 's celebrated abovementioned rebuilds from 1929 onwards were mostly of de Glehn compounds. Chapelon, along with other French engineers such as Gaston du Bousquet, and Marc de Caso brought these locomotives to their highest pinnacles of performance. Maffei in Munich also built

1197-677: The "simple Mallet", which used the same articulated arrangement but eliminated the compounding. Both simple and compound Mallet locomotives lasted to the end of steam. Mallet's aforementioned rigid wheelbase divided-drive schemes, although never actually applied, may have inspired Francis Webb in Britain. After trials with an old single-driver converted into a 2-cylinder compound in 1878, he introduced in 1882 his first Experiment class with similar divided-drive : 3-cylinder compounds with uncoupled driving wheels in which two small outside high-pressure cylinders exhausted into one large low-pressure one between

1260-533: The 1920s. In 1889 Samuel M. Vauclain of the Baldwin Locomotive Works devised the Vauclain compound locomotive. This design used a double-expansion engine fitted into the space occupied by a conventional single-expansion engine on the locomotive, using a single piston valve with conventional gear to control both the high- and low-pressure cylinders. The high-pressure cylinder could be placed above or below

1323-646: The 2 low-pressure cylinders are placed inside the frames. One class U survives U-127. It is preserved at the Museum of the Moscow Railway . The North British Locomotive Company of Glasgow built de Glehn compounds for the Bengal Nagpur Railway of India in 1906, which were very successful and economical on water. Further enlarged engines were built in 1929. In 1900 the Italian engineer Enrico Plancher developed

SECTION 20

#1733094076413

1386-469: The Argentinian engineer L.D. Porta for new-built modern steam locomotives all of which would have used multiple expansion, some following this 3-cylinder compound system. These included locomotives of the 2-10-0 wheel arrangement, one of which was intended for fast freight work in the US, this being a high-pressure triple-expansion machine. Strange as this layout may seem, it had a number of advantages from

1449-481: The Dublin-Belfast expresses. Preserved examples are the rebuilt prototype Midland Compound, 1000 (BR 41000), and Great Northern Railway (Ireland) no. 85 Merlin. From 1896, Weymann introduced a 3-cylinder 2-6-0 type with divided drive and cranks at 120° for service on the heavily graded Swiss Jura-Simplon routes; eventually they numbered 147 units. Chapelon's aborted post-war locomotive replacement programme included

1512-568: The L.F.Loree, was built by the American Locomotive Company and the Delaware & Hudson Railroad in 1933. The main benefits sought from compounding are reduced fuel and water consumption plus higher power/weight ratio due to more expansion in the cylinder before the exhaust valve opens, which gives a higher efficiency; additional advantages include more-even torque and in many cases, superior riding qualities with consequent less wear on

1575-403: The LP cylinder diameter and/or by lengthening the stroke. In non-condensing engines, the HP:LP volume ratio is usually 1:2¼. On geared locomotives, cylinder volumes can be kept more or less identical by increasing LP piston speed. Compound may refer to any multiple-expansion engine. Added insight comes with the terms double, triple, quadruple. An experimental triple-expansion locomotive, named

1638-399: The LP cylinder on starting. In some cases this is manually operated by the locomotive driver, while in other cases it is automatic; in the latter case the valve is often referred to as an "intercepting valve". The primary difference between various forms of cross compound locomotives is in the design and operation of the intercepting valve. A second design issue of cross compound locomotives

1701-402: The Santa Fe having large numbers in several wheel arrangements. A characteristic feature of larger tandem compound locomotives was an "A-frame" crane mounted on each side of the smokebox, to allow removing the front cylinder (typically the LP cylinder) when the rear cylinder required service. A type long-familiar on French railways was the 4-cylinder de Glehn compound. The prototype, Nord 701 ,

1764-528: The United States. It declined in popularity due to a perceived increased maintenance requirement. Nonetheless, compound Mallets were built by the Norfolk and Western Railway up to 1952 and more importantly, Compound locomotives continued to be designed and built in France until the end of steam in the 1970's. French compounding of railway engines became so highly developed, eventually incorporating reheaters between

1827-612: The basis for an initial batch of five Midland Railway 1000 Class locomotives designed by Samuel Waite Johnson for the Midland Railway . These were followed from 1905 onwards by 40 of an enlarged production version where all the Smith fittings were replaced by a simplified starting arrangement incorporated into the regulator; this to the design of Johnson's successor, Richard Deeley . The original Johnson locomotives were rebuilt as Deeley compounds from 1914 onwards and were superheated. After

1890-548: The class was presented at the International Railway Congress of 1900 in Paris and was looked at with interest, while not meeting with outstanding success; however, on the long run the asymmetrical design, while simple, proved to be rather awkward, as it was difficult to equalize the work of each side of the locomotive and this caused hunting . The Plancher engine was used again on some Ferrovie dello Stato designs like

1953-581: The common stroke was 24 in (610 mm). The other two were both 2-4-0s on the Great Western Railway (GWR) – no. 7 , built in February 1886 for the standard gauge, and no. 8 built in May 1886 for the broad gauge. No. 7 had high-pressure cylinders 15 in (380 mm) diameter, low-pressure 23 in (580 mm). The cylinders of no. 8 were slightly smaller: high-pressure 14 in (360 mm), low-pressure 22 in (560 mm). In both GWR locomotives,

Alfred de Glehn - Misplaced Pages Continue

2016-410: The compound locomotive has two cylinders, a high-pressure cylinder on one side, and a low-pressure on the other side; the name reflects the steam flow from the HP to the LP across the locomotive. Most early attempts at compound locomotives were variations on the cross compound design, some notable ones being that of Baxter (1870) and Hudson (1873). Another was by Anatole Mallet who introduced in 1876

2079-518: The design of Edouard Sauvage. Nord 3.101  [ fr ] remained a solitary example but nonetheless put in 42 years' service. On the British North Eastern Railway there appeared in 1898 a prototype 4-4-0 compound locomotive, no. 1619 ( NER Class 3CC ) with this same layout to the design of Walter Mackersie Smith (this itself being rebuilt from an earlier Worsdell/Von Borries 2-cylinder compound prototype of 1893). This formed

2142-435: The early years of the 20th century. The problem not only affected compounds, but was dramatic in their case due to the long steam cycle which made them particularly sensitive to temperature-drop and condensation of the steam during its lengthy passage. In rebuilding older locomotives from 1929 onwards, Chapelon was able to inexpensively obtain what seemed almost "magical" improvements in power and economy by improving flow through

2205-573: The family remaining in England followed his example about 1917, during the First World War , when Britain was at war with Germany. De Glehn died at his home at Mulhouse in Alsace at the age of 88. His house had been commandeered as the German district headquarters during the war. Compound locomotive#De Glehn A compound locomotive is a steam locomotive which is powered by a compound engine ,

2268-631: The formation of the London, Midland and Scottish Railway in 1923, and after comparative trials against locomotives of the constituent companies, the Midland compound was deemed the best and adopted in a slightly modified version, the LMS Compound 4-4-0 , from 1925 to 1932 as the LMS standard class 4 express locomotive reaching a final total of 245 locomotives. The LMS locomotives were not universally appreciated especially on

2331-440: The frames. Other similar classes followed, progressively enlarged. The uncoupled driving wheels were problematic as the two pairs of wheels could be rotating in opposite directions on starting, if a locomotive had previously backed onto its train. The arrangement appears to have been adopted due to lack of space, but Tuplin has pointed out that if Walschaert's valve gear had been fitted, the driving wheels could have been coupled in

2394-415: The high and low pressure stages as well as the initial use of superheaters, that France achieved the highest power to weight ratio and the highest horsepower to fire grate-area ratio of any steam locomotives ever built. In the usual arrangement for a compound engine the steam is first expanded in one or two high-pressure (HP) cylinders, then having given up some heat and lost some pressure, it exhausts into

2457-490: The high-pressure cylinder and afterwards expands again in the low-pressure cylinder. Even though this was a revolutionary new steam technology, he was unfortunately prevented from pursuing his invention by litigation with James Watt ( Boulton & Watt ) over intellectual property . His compound engine principle was not revived until 1804 (by Arthur Woolf ) following the expiration of Boulton and Watt's patent. Hornblower's compound engine principle contributed significantly to

2520-458: The increases in steam engine efficiency , and it was the foundation of the expansion engine. See Also McNaught'ed Engines After the patent litigation with Boulton & Watt, Hornblower came up with an idea for a new kind of rotary engine . He worked on it for several years and patented it on 5 June 1798. The engine's construction was the most complex so far, but as before he ran into trouble with Watt's patents on these subjects. He invented

2583-401: The inside of the frames for easy access. Later he had studies made of steam passages to reduce throttling which paved the way for Chapelon's work 27 years later. This turned into a very efficient layout copied by many railroads in France, Belgium, Germany, and England. As such, the de Glehn type was built in large numbers in France, in various wheel arrangements, for service at home and abroad;

Alfred de Glehn - Misplaced Pages Continue

2646-665: The later de Glehn compounds, the 4-cylinder simple 4-4-2 locomotive no. 40 North Star was specially built. Although a number of items of French practice were adopted by the Great Western as a result of these trials, the de Glehn compound system was not one of them. In 1904 The Pennsylvania railroad ordered a copy of the Nord Atlantic called "the French aristocrat" on the Pennsy, but too light which made her underpowered due to low traction. She

2709-454: The low-pressure cylinder, each had its own piston rod connected to a common crosshead, so that one connecting rod and crank was required for each pair of cylinders. Substantial fuel efficiencies were achieved, but maintenance difficulties doomed the type. Most were converted to conventional engines. The tandem compound first appeared on the Erie Railroad in 1867. Like the Vauclain compound,

2772-431: The low-pressure cylinders were in front, and the stroke was 21 in (530 mm). No. 7 ceased work in 1887, being dismantled in 1890; no. 8 never entered regular service, failing when on trial - it was partially dismantled in 1892. Both locomotives were renewed in 1894 as standard gauge simple-expansion 4-4-0s. Tandem compound locomotives were very common in the United States prior to WW1, with some railroads such as

2835-456: The magnitude of the continual heating and cooling of a single-expansion steam engine that leads to inefficiency was invented in 1804 by British engineer Arthur Woolf . Woolf patented his stationary Woolf high-pressure compound engine in 1805. The first design of a compound railway locomotive on record belongs to Thomas Craddock, who patented a design for a condensing compound locomotive in 1846. In 1850 United Kingdom patent number 13029

2898-420: The normal way. Wheel arrangements varied: 2-2-2-0, 2-2-2-2, 2-2-2-2T, 2-2-4-0T and 0-8-0; the last were freight locomotives and the only ones of this type to have all wheels coupled. Webb's next stage consisted of two classes of 4-cylinder compound 4-4-0s one 4-6-0 type and finally more 0-8-0s The latter are considered to have been the most successful Webb compounds and some lasted in their original condition into

2961-609: The old LNWR section where they went hand in hand with operating methods imposed by the Midland Railway constituent but in Scotland they were received as the solution to serious endemic express locomotive problems and were generally well liked. Five larger 3-cylinder locomotives were built to the same general pattern by Beyer, Peacock and Company to the design of G.T. Glover for the Great Northern Railway (Ireland) in 1932 for

3024-432: The piston rod of the rear cylinder is extended forwards to also carry the forward piston; or if the forward cylinder be the low-pressure cylinder (and thus larger in diameter than the high-pressure cylinder behind), it may have two long piston rods which pass above and below, or to either side, of the high-pressure cylinder in order to reach the common crosshead. In Great Britain, there were three tandem compounds. The first

3087-546: The point of view of equalising piston thrusts and arrangement of steam passages. It was claimed that with proper maintenance and operating procedures, such locomotives could compete with modern forms of traction. Other projects were for small 2-cylinder compounds: notably a locomotive for sugar plantations in Cuba, burning bagasse . In Britain, compounding was much more widely used on road locomotives (steam rollers, traction engines and steam lorries) than on rail. The usual arrangement

3150-525: The steam circuit, at the same time putting in a larger superheater to increase the initial steam temperature and delay condensation in the LP cylinders. To prevent severe condensation taking place, the L.N.E.R. applied resuperheat to their water-tube boilered No. 10,000 to make up for inadequate HP superheat. The Paris-Orleans Railway designed a demonstrator 2-12-0 locomotive, No. 160-A1 (tested 1948-51), with resuperheat between HP and LP stages. They also fitted steam jackets to both HP/LP cylinders for what

3213-461: The system but no further examples followed. Whether the above locomotive is, strictly speaking, a compound is subject to debate: the first recognisable compound application to a locomotive was on Erie Railway's No 122, an ordinary American type fitted in 1867 with tandem compound cylinders following J.F. Lay's patent no. 70341. Nothing is known of this locomotive's subsequent career and it does not appear to have been reproduced. The simplest form of

SECTION 50

#1733094076413

3276-403: The track and running gear. Where heavy grades and low axle loads were combined, the compound locomotive was often deemed to be the most viable solution. Successful design of a compound locomotive demands a firm grasp of thermo- and fluid dynamics; that such has frequently not been the case is why many productions in the past have been far from optimal. This is especially true of locomotives built in

3339-422: The trailing axle. In 1891 two production locomotives, Nord 2.121 and 2.122 , were placed in service with the cylinder positions inverted at du Bousquet's insistence, that is outside HP and inside LP, one of which initially had uncoupled driving axles as before but this arrangement proved inferior to the coupled version. The type was greatly improved by du Bousquet who refined the layout of rods and valve gear along

3402-573: The twelve children of Robert von Glehn, a Prussian nobleman originally from the Baltic provinces, whose family had estates near Tallinn in Estonia, who had settled in England and married a Scotswoman. Their house in Sydenham, London , was a meeting place of artistic, literary and musical people, including George Grove , Arthur Sullivan , Jenny Lind , and J. R. Green . Louise Creighton , an author and activist,

3465-619: The young Hornblower was educated at Truro Grammar School . He was baptised at Trelever on 25 July 1773, aged 20 (he and his family were much involved in Baptist churches in Cornwall), and was apprenticed to a metal-working tradesman at Penryn . He married twice, first to his cousin Rosamund Phillips in 1775 and later to Elizabeth Jordan with whom he had two surviving daughters, Rosamund (1789) and Elizabeth (1790). He died on 23 February 1815 and

3528-536: Was a 2-2-2-0 designed by Alfred de Glehn , an engineer at the Société Alsacienne de Constructions Mécaniques (SACM), and ordered by Gaston du Bousquet , chief engineer of the Nord Railway. It had a 4-cylinder layout with the driving wheels uncoupled, and bore a superficial resemblance to a Webb compound, except that inside HP cylinders drove the leading driving axle whilst the LP cylinders were outside, driving

3591-510: Was awarded to James Samuel , the engineer of the Eastern Counties Railway , for a "continuous expansion locomotive", a method of steam locomotive compounding, although the idea appears to have come from one John Nicholson , a driver on the line. In this system, the two cylinders alternated as high and low pressure, with the change-over occurring halfway through each stroke. Two locomotives, one passenger and one goods, were converted to

3654-517: Was believed by Chapelon to be the first time for a compound locomotive. Resuperheating was also by Porta on his prototype 4-8-0 rebuild: 'La Argentina' (tested around the same time in Argentina). Proponents of simple expansion argue that use of early cut-off in the cylinder thus expanding small quantities of steam at each piston stroke obviates the need for the complication and initial expense of compounding and indeed multi-cylinder single expansion – this

3717-413: Was just 850 g/hp (1.1 g/W) per hour and water consumption was 6.45 L/hp (8.6 mL/W) per hour at 3,000 hp (2,200 kW). A typical simple-expansion locomotive could consume approximately double these amounts to generate the same output. A layout with more or less 120° crank setting (the final setting was to be empirically determined) with HP cylinder placed on the left-hand side was fully developed by

3780-463: Was no. 224 of the North British Railway which was built in 1871 as a 4-4-0 simple-expansion locomotive, being the pioneer of the 224 Class ; it was converted to a tandem compound in 1885, but reverted to simple in 1887. As a compound, the high-pressure cylinders were 13 inches (330 mm) diameter, placed in front of the low-pressure cylinders, which were 20 in (510 mm) diameter;

3843-456: Was one high-pressure cylinder and one low-pressure cylinder (double crank compound), however a superposed Vauclain-style single crank compound type did exist. Jonathan Hornblower Jonathan Hornblower (5 July 1753 – 23 February 1815) was an English pioneer of steam power . The son of Jonathan Hornblower the Elder and the brother of Jabez Carter Hornblower , two fellow pioneers,

SECTION 60

#1733094076413

3906-652: Was one of De Glehn's sisters. One of his brothers, Alexander von Glehn, was a coffee-merchant and built narrow-gauge railways in France. Alexander was the treasurer of the Protestant Evangelical Society of Relief in Paris which provided help to victims of the Franco-Prussian War, and Alexander’s son Wilfrid de Glehn was a British painter. Alfred De Glehn changed the nobiliary particle in his name from "von" to "de" when he settled in France. Other members of

3969-569: Was scrapped in 1912. In New Zealand the locally built NZR A class of 1906 and the NZR X class of 1908 were de Glehn compounds, though mostly later converted to simple superheated locomotives (and the A class to 2 cylinders only). In Russia, from 1906 the Putilov Company (later the Kirov Plant ) built the 4-cylinder Class U locomotive. The 2 high-pressure cylinders were placed outside the frames, and

#412587