71-523: BlueScope Steel Limited is an Australian flat product steel producer that was spun-off from BHP Billiton in 2002. BlueScope was formed when BHP Billiton spun-off its steel assets on 15 July 2002 as BHP Steel . It was renamed BlueScope on 17 November 2003. Early in 2004, BlueScope merged with the American firm Butler Manufacturing. Such a merger was considered a strategic move for both companies as they were similar in character and non-overlapping in
142-412: A BOS process is manufactured in one-twelfth the time. Today, electric arc furnaces (EAF) are a common method of reprocessing scrap metal to create new steel. They can also be used for converting pig iron to steel, but they use a lot of electrical energy (about 440 kWh per metric ton), and are thus generally only economical when there is a plentiful supply of cheap electricity. The steel industry
213-684: A carbon-intermediate steel by the 1st century AD. There is evidence that carbon steel was made in Western Tanzania by the ancestors of the Haya people as early as 2,000 years ago by a complex process of "pre-heating" allowing temperatures inside a furnace to reach 1300 to 1400 °C. Evidence of the earliest production of high carbon steel in South Asia is found in Kodumanal in Tamil Nadu ,
284-444: A change of volume. In this case, expansion occurs. Internal stresses from this expansion generally take the form of compression on the crystals of martensite and tension on the remaining ferrite, with a fair amount of shear on both constituents. If quenching is done improperly, the internal stresses can cause a part to shatter as it cools. At the very least, they cause internal work hardening and other microscopic imperfections. It
355-428: A ferrite BCC crystal form, but at higher carbon content it takes a body-centred tetragonal (BCT) structure. There is no thermal activation energy for the transformation from austenite to martensite. There is no compositional change so the atoms generally retain their same neighbours. Martensite has a lower density (it expands during the cooling) than does austenite, so that the transformation between them results in
426-445: A hard but brittle martensitic structure. The steel is then tempered, which is just a specialized type of annealing, to reduce brittleness. In this application the annealing (tempering) process transforms some of the martensite into cementite, or spheroidite and hence it reduces the internal stresses and defects. The result is a more ductile and fracture-resistant steel. When iron is smelted from its ore, it contains more carbon than
497-412: A narrow range of concentrations of mixtures of carbon and iron that make steel, several different metallurgical structures, with very different properties can form. Understanding such properties is essential to making quality steel. At room temperature , the most stable form of pure iron is the body-centred cubic (BCC) structure called alpha iron or α-iron. It is a fairly soft metal that can dissolve only
568-534: A small concentration of carbon, no more than 0.005% at 0 °C (32 °F) and 0.021 wt% at 723 °C (1,333 °F). The inclusion of carbon in alpha iron is called ferrite . At 910 °C, pure iron transforms into a face-centred cubic (FCC) structure, called gamma iron or γ-iron. The inclusion of carbon in gamma iron is called austenite. The more open FCC structure of austenite can dissolve considerably more carbon, as much as 2.1%, (38 times that of ferrite) carbon at 1,148 °C (2,098 °F), which reflects
639-448: A steel's final rolling, it is heat treated for strength; however, this is relatively rare. Steel was known in antiquity and was produced in bloomeries and crucibles . The earliest known production of steel is seen in pieces of ironware excavated from an archaeological site in Anatolia ( Kaman-Kalehöyük ) which are nearly 4,000 years old, dating from 1800 BC. Wootz steel
710-672: Is continuously cast into long slabs, cut and shaped into bars and extrusions and heat treated to produce a final product. Today, approximately 96% of steel is continuously cast, while only 4% is produced as ingots. The ingots are then heated in a soaking pit and hot rolled into slabs, billets , or blooms . Slabs are hot or cold rolled into sheet metal or plates. Billets are hot or cold rolled into bars, rods, and wire. Blooms are hot or cold rolled into structural steel , such as I-beams and rails . In modern steel mills these processes often occur in one assembly line , with ore coming in and finished steel products coming out. Sometimes after
781-403: Is common for quench cracks to form when steel is water quenched, although they may not always be visible. There are many types of heat treating processes available to steel. The most common are annealing , quenching , and tempering . Annealing is the process of heating the steel to a sufficiently high temperature to relieve local internal stresses. It does not create a general softening of
SECTION 10
#1733093835964852-403: Is desirable. To become steel, it must be reprocessed to reduce the carbon to the correct amount, at which point other elements can be added. In the past, steel facilities would cast the raw steel product into ingots which would be stored until use in further refinement processes that resulted in the finished product. In modern facilities, the initial product is close to the final composition and
923-449: Is distinguishable from wrought iron (now largely obsolete), which may contain a small amount of carbon but large amounts of slag . Iron is commonly found in the Earth's crust in the form of an ore , usually an iron oxide, such as magnetite or hematite . Iron is extracted from iron ore by removing the oxygen through its combination with a preferred chemical partner such as carbon which
994-408: Is heat treated to contain both a ferritic and martensitic microstructure to produce a formable, high strength steel. Transformation Induced Plasticity (TRIP) steel involves special alloying and heat treatments to stabilize amounts of austenite at room temperature in normally austenite-free low-alloy ferritic steels. By applying strain, the austenite undergoes a phase transition to martensite without
1065-535: Is known as stainless steel . Tungsten slows the formation of cementite , keeping carbon in the iron matrix and allowing martensite to preferentially form at slower quench rates, resulting in high-speed steel . The addition of lead and sulphur decrease grain size, thereby making the steel easier to turn , but also more brittle and prone to corrosion. Such alloys are nevertheless frequently used for components such as nuts, bolts, and washers in applications where toughness and corrosion resistance are not paramount. For
1136-975: Is located at Port Kembla, New South Wales . In October 2011, No.6 Blast furnace, one of two at Port Kembla, was shut down, reducing the plant's production capacity by 50% after the company decided to exit the export market. Major products include steel slab, hot rolled coil, steel plate, automotive steel, galvanised steel, corrugated galvanised iron , Zincalume brand (55% aluminium , 43.5% zinc , 1.5% silicon ) coated steel, and Colorbond brand pre-painted steel . Tinplate production ceased in March 2007. Orrcon Steel supplies steel, tube and pipe to steel fabricators, furniture and trailer body manufacturers, housing and construction companies and pipeline and infrastructure engineering firms. It has distribution centres in Melbourne , Sydney , Brisbane , Perth and Adelaide . BlueScope reported Total CO2e emissions (Direct + Indirect) for
1207-687: Is often considered an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development . In 1980, there were more than 500,000 U.S. steelworkers. By 2000, the number of steelworkers had fallen to 224,000. The economic boom in China and India caused a massive increase in the demand for steel. Between 2000 and 2005, world steel demand increased by 6%. Since 2000, several Indian and Chinese steel firms have expanded to meet demand, such as Tata Steel (which bought Corus Group in 2007), Baosteel Group and Shagang Group . As of 2017 , though, ArcelorMittal
1278-507: Is one of the largest manufacturing industries in the world, but also one of the most energy and greenhouse gas emission intense industries, contributing 8% of global emissions. However, steel is also very reusable: it is one of the world's most-recycled materials, with a recycling rate of over 60% globally . The noun steel originates from the Proto-Germanic adjective * * stahliją or * * stakhlijan 'made of steel', which
1349-544: Is one of the world's most-recycled materials, with a recycling rate of over 60% globally; in the United States alone, over 82,000,000 metric tons (81,000,000 long tons; 90,000,000 short tons) were recycled in the year 2008, for an overall recycling rate of 83%. As more steel is produced than is scrapped, the amount of recycled raw materials is about 40% of the total of steel produced - in 2016, 1,628,000,000 tonnes (1.602 × 10 long tons; 1.795 × 10 short tons) of crude steel
1420-510: Is possible only by reducing iron's ductility. Steel was produced in bloomery furnaces for thousands of years, but its large-scale, industrial use began only after more efficient production methods were devised in the 17th century, with the introduction of the blast furnace and production of crucible steel . This was followed by the Bessemer process in England in the mid-19th century, and then by
1491-434: Is possible to make very high-carbon (and other alloy material) steels, but such are not common. Cast iron is not malleable even when hot, but it can be formed by casting as it has a lower melting point than steel and good castability properties. Certain compositions of cast iron, while retaining the economies of melting and casting, can be heat treated after casting to make malleable iron or ductile iron objects. Steel
SECTION 20
#17330938359641562-400: Is quite ductile , or soft and easily formed. In steel, small amounts of carbon, other elements, and inclusions within the iron act as hardening agents that prevent the movement of dislocations . The carbon in typical steel alloys may contribute up to 2.14% of its weight. Varying the amount of carbon and many other alloying elements, as well as controlling their chemical and physical makeup in
1633-457: Is related to * * stahlaz or * * stahliją 'standing firm'. The carbon content of steel is between 0.02% and 2.14% by weight for plain carbon steel ( iron - carbon alloys ). Too little carbon content leaves (pure) iron quite soft, ductile, and weak. Carbon contents higher than those of steel make a brittle alloy commonly called pig iron . Alloy steel is steel to which other alloying elements have been intentionally added to modify
1704-441: Is the base metal of steel. Depending on the temperature, it can take two crystalline forms (allotropic forms): body-centred cubic and face-centred cubic . The interaction of the allotropes of iron with the alloying elements, primarily carbon, gives steel and cast iron their range of unique properties. In pure iron, the crystal structure has relatively little resistance to the iron atoms slipping past one another, and so pure iron
1775-529: Is the world's largest steel producer . In 2005, the British Geological Survey stated China was the top steel producer with about one-third of the world share; Japan , Russia , and the United States were second, third, and fourth, respectively, according to the survey. The large production capacity of steel results also in a significant amount of carbon dioxide emissions inherent related to
1846-498: Is then lost to the atmosphere as carbon dioxide. This process, known as smelting , was first applied to metals with lower melting points, such as tin , which melts at about 250 °C (482 °F), and copper , which melts at about 1,100 °C (2,010 °F), and the combination, bronze, which has a melting point lower than 1,083 °C (1,981 °F). In comparison, cast iron melts at about 1,375 °C (2,507 °F). Small quantities of iron were smelted in ancient times, in
1917-631: The Golconda area in Andhra Pradesh and Karnataka , regions of India , as well as in Samanalawewa and Dehigaha Alakanda, regions of Sri Lanka . This came to be known as wootz steel , produced in South India by about the sixth century BC and exported globally. The steel technology existed prior to 326 BC in the region as they are mentioned in literature of Sangam Tamil , Arabic, and Latin as
1988-586: The cementation process was described in a treatise published in Prague in 1574 and was in use in Nuremberg from 1601. A similar process for case hardening armour and files was described in a book published in Naples in 1589. The process was introduced to England in about 1614 and used to produce such steel by Sir Basil Brooke at Coalbrookdale during the 1610s. The raw material for this process were bars of iron. During
2059-592: The open-hearth furnace . With the invention of the Bessemer process, a new era of mass-produced steel began. Mild steel replaced wrought iron . The German states were the major steel producers in Europe in the 19th century. American steel production was centred in Pittsburgh , Bethlehem, Pennsylvania , and Cleveland until the late 20th century. Currently, world steel production is centered in China, which produced 54% of
2130-445: The 17th century, it was realized that the best steel came from oregrounds iron of a region north of Stockholm , Sweden. This was still the usual raw material source in the 19th century, almost as long as the process was used. Crucible steel is steel that has been melted in a crucible rather than having been forged , with the result that it is more homogeneous. Most previous furnaces could not reach high enough temperatures to melt
2201-470: The 17th century, the first step in European steel production has been the smelting of iron ore into pig iron in a blast furnace . Originally employing charcoal, modern methods use coke , which has proven more economical. In these processes, pig iron made from raw iron ore was refined (fined) in a finery forge to produce bar iron , which was then used in steel-making. The production of steel by
BlueScope - Misplaced Pages Continue
2272-600: The Arabs from Persia, who took it from India. It was originally created from several different materials including various trace elements , apparently ultimately from the writings of Zosimos of Panopolis . In 327 BC, Alexander the Great was rewarded by the defeated King Porus , not with gold or silver but with 30 pounds of steel. A recent study has speculated that carbon nanotubes were included in its structure, which might explain some of its legendary qualities, though, given
2343-463: The Linz-Donawitz process of basic oxygen steelmaking (BOS), developed in 1952, and other oxygen steel making methods. Basic oxygen steelmaking is superior to previous steelmaking methods because the oxygen pumped into the furnace limited impurities, primarily nitrogen, that previously had entered from the air used, and because, with respect to the open hearth process, the same quantity of steel from
2414-503: The addition of heat. Twinning Induced Plasticity (TWIP) steel uses a specific type of strain to increase the effectiveness of work hardening on the alloy. New South Wales Environment Protection Authority The NSW Environment Protection Authority (EPA) is an independent statutory authority that sits in the Environment portfolio as part of the Planning and Environment cluster. It
2485-646: The allegations, stating "we do not believe that BlueScope, or any current or former employees, have engaged in cartel conduct". In December 2020, Ellis was sentenced to eight months imprisonment and fined $ 10,000 after pleading guilty to obstructing the investigation, inciting two employees to give false information. In December 2022 the Australian Federal Court found that BlueScope and Ellis had attempted to induce eight steel distributors in Australia and an overseas manufacturer to enter agreements to fix and/or raise
2556-436: The austenite grain boundaries until the percentage of carbon in the grains has decreased to the eutectoid composition (0.8% carbon), at which point the pearlite structure forms. For steels that have less than 0.8% carbon (hypoeutectoid), ferrite will first form within the grains until the remaining composition rises to 0.8% of carbon, at which point the pearlite structure will form. No large inclusions of cementite will form at
2627-471: The austenite is for it to precipitate out of solution as cementite , leaving behind a surrounding phase of BCC iron called ferrite with a small percentage of carbon in solution. The two, cementite and ferrite, precipitate simultaneously producing a layered structure called pearlite , named for its resemblance to mother of pearl . In a hypereutectoid composition (greater than 0.8% carbon), the carbon will first precipitate out as large inclusions of cementite at
2698-494: The boundaries in hypoeutectoid steel. The above assumes that the cooling process is very slow, allowing enough time for the carbon to migrate. As the rate of cooling is increased the carbon will have less time to migrate to form carbide at the grain boundaries but will have increasingly large amounts of pearlite of a finer and finer structure within the grains; hence the carbide is more widely dispersed and acts to prevent slip of defects within those grains, resulting in hardening of
2769-521: The characteristics of steel. Common alloying elements include: manganese , nickel , chromium , molybdenum , boron , titanium , vanadium , tungsten , cobalt , and niobium . Additional elements, most frequently considered undesirable, are also important in steel: phosphorus , sulphur , silicon , and traces of oxygen , nitrogen , and copper . Plain carbon-iron alloys with a higher than 2.1% carbon content are known as cast iron . With modern steelmaking techniques such as powder metal forming, it
2840-514: The company acquired four companies consisting of most of the United States holdings of the Argentinian firm Ternium , those being Steelscape, ASC Profiles, Varco Pruden Buildings; and Metl-Span, which was acquired by NCI Building Systems in 2012. The four companies had been held by the Mexican Grupo IMSA prior to their purchase by Ternium. Steelscape originated in 1996 as BHP Coated Steel and
2911-566: The criteria against which the EPA must perform. The Environment Protection Authority has responsibilities and powers under a range of NSW environmental legislation. The Protection of the Environment Operations Act 1997 (POEO Act) Protection of the Environment Operations Act 1997 (POEO Act) is the key piece of environment protection legislation administered by the EPA. The object of the Act
BlueScope - Misplaced Pages Continue
2982-422: The desired properties. Nickel and manganese in steel add to its tensile strength and make the austenite form of the iron-carbon solution more stable, chromium increases hardness and melting temperature, and vanadium also increases hardness while making it less prone to metal fatigue . To inhibit corrosion, at least 11% chromium can be added to steel so that a hard oxide forms on the metal surface; this
3053-413: The final steel (either as solute elements, or as precipitated phases), impedes the movement of the dislocations that make pure iron ductile, and thus controls and enhances its qualities. These qualities include the hardness , quenching behaviour , need for annealing , tempering behaviour , yield strength , and tensile strength of the resulting steel. The increase in steel's strength compared to pure iron
3124-625: The finest steel in the world exported to the Roman, Egyptian, Chinese and Arab worlds at that time – what they called Seric Iron . A 200 BC Tamil trade guild in Tissamaharama , in the South East of Sri Lanka, brought with them some of the oldest iron and steel artifacts and production processes to the island from the classical period . The Chinese and locals in Anuradhapura , Sri Lanka had also adopted
3195-503: The form of charcoal) in a crucible, was produced in Merv by the 9th to 10th century AD. In the 11th century, there is evidence of the production of steel in Song China using two techniques: a "berganesque" method that produced inferior, inhomogeneous steel, and a precursor to the modern Bessemer process that used partial decarburization via repeated forging under a cold blast . Since
3266-599: The hardenability of thick sections. High strength low alloy steel has small additions (usually < 2% by weight) of other elements, typically 1.5% manganese, to provide additional strength for a modest price increase. Recent corporate average fuel economy (CAFE) regulations have given rise to a new variety of steel known as Advanced High Strength Steel (AHSS). This material is both strong and ductile so that vehicle structures can maintain their current safety levels while using less material. There are several commercially available grades of AHSS, such as dual-phase steel , which
3337-865: The heart of the objectives under the Protection of the Environment Administration Act 1991 (POEA Act): The EPA was established originally in 1991 as an independent agency under the Protection of the Environment Administration Act . Between 2003 and 2012, the EPA was incorporated into the Department of Environment and Conservation. Following a significant pollution incident at Kooragang Island in Newcastle in August 2011, an independent review recommended that an EPA be re-formed as an independent agency. The agency
3408-494: The level of pricing for flat steel products. BlueScope was ordered to pay a $ 57.5 million penalty, the highest penalty ever imposed for cartel conduct in Australia. On 6 May 2020, a 59-year-old man was killed at BlueScope's Port Kembla facility after becoming trapped between a car and a crane, resulting in the site being temporarily shut. On 14 May 2020, BlueScope was the subject of a cyberattack that forced its production systems to be temporarily halted company-wide after ransomware
3479-439: The main production route. At the end of 2008, the steel industry faced a sharp downturn that led to many cut-backs. In 2021, it was estimated that around 7% of the global greenhouse gas emissions resulted from the steel industry. Reduction of these emissions are expected to come from a shift in the main production route using cokes, more recycling of steel and the application of carbon capture and storage technology. Steel
3550-483: The markets they operated in, such that acquisition of Butler, based in Kansas City , Missouri , would provide BlueScope with access to United States and Chinese markets. Butler was founded in 1901, operated in sixteen countries and focused on non-residential building and building component construction. At the time of the merger, Butler had a dozen production facilities across the United States, China and Mexico. In 2007,
3621-450: The most part, however, p-block elements such as sulphur, nitrogen , phosphorus , and lead are considered contaminants that make steel more brittle and are therefore removed from steel during the melting processing. The density of steel varies based on the alloying constituents but usually ranges between 7,750 and 8,050 kg/m (484 and 503 lb/cu ft), or 7.75 and 8.05 g/cm (4.48 and 4.65 oz/cu in). Even in
SECTION 50
#17330938359643692-436: The oxidation rate of iron increases rapidly beyond 800 °C (1,470 °F), it is important that smelting take place in a low-oxygen environment. Smelting, using carbon to reduce iron oxides, results in an alloy ( pig iron ) that retains too much carbon to be called steel. The excess carbon and other impurities are removed in a subsequent step. Other materials are often added to the iron/carbon mixture to produce steel with
3763-449: The product but only locally relieves strains and stresses locked up within the material. Annealing goes through three phases: recovery , recrystallization , and grain growth . The temperature required to anneal a particular steel depends on the type of annealing to be achieved and the alloying constituents. Quenching involves heating the steel to create the austenite phase then quenching it in water or oil . This rapid cooling results in
3834-741: The production methods of creating wootz steel from the Chera Dynasty Tamils of South India by the 5th century AD. In Sri Lanka, this early steel-making method employed a unique wind furnace, driven by the monsoon winds, capable of producing high-carbon steel. Since the technology was acquired from the Tamilians from South India, the origin of steel technology in India can be conservatively estimated at 400–500 BC. The manufacture of wootz steel and Damascus steel , famous for its durability and ability to hold an edge, may have been taken by
3905-471: The solid-state, by heating the ore in a charcoal fire and then welding the clumps together with a hammer and in the process squeezing out the impurities. With care, the carbon content could be controlled by moving it around in the fire. Unlike copper and tin, liquid or solid iron dissolves carbon quite readily. All of these temperatures could be reached with ancient methods used since the Bronze Age . Since
3976-401: The steel. At the very high cooling rates produced by quenching, the carbon has no time to migrate but is locked within the face-centred austenite and forms martensite . Martensite is a highly strained and stressed, supersaturated form of carbon and iron and is exceedingly hard but brittle. Depending on the carbon content, the martensitic phase takes different forms. Below 0.2% carbon, it takes on
4047-556: The steel. The early modern crucible steel industry resulted from the invention of Benjamin Huntsman in the 1740s. Blister steel (made as above) was melted in a crucible or in a furnace, and cast (usually) into ingots. The modern era in steelmaking began with the introduction of Henry Bessemer 's process in 1855, the raw material for which was pig iron. His method let him produce steel in large quantities cheaply, thus mild steel came to be used for most purposes for which wrought iron
4118-555: The technology of that time, such qualities were produced by chance rather than by design. Natural wind was used where the soil containing iron was heated by the use of wood. The ancient Sinhalese managed to extract a ton of steel for every 2 tons of soil, a remarkable feat at the time. One such furnace was found in Samanalawewa and archaeologists were able to produce steel as the ancients did. Crucible steel , formed by slowly heating and cooling pure iron and carbon (typically in
4189-492: The twelve months ending 30 June 2020 at 10,280 Kt (-120 /-1.2% y-o-y). In August 2019, the Australian Competition & Consumer Commission launched a civil case against BlueScope and its former general manager of sales and marketing Jason Ellis for engaging in cartel conduct, alleging that they tried to induce competitors to enter contracts to fix prices for flat steel products between 2013 and 2014. BlueScope denied
4260-522: The upper carbon content of steel, beyond which is cast iron. When carbon moves out of solution with iron, it forms a very hard, but brittle material called cementite (Fe 3 C). When steels with exactly 0.8% carbon (known as a eutectoid steel), are cooled, the austenitic phase (FCC) of the mixture attempts to revert to the ferrite phase (BCC). The carbon no longer fits within the FCC austenite structure, resulting in an excess of carbon. One way for carbon to leave
4331-428: The world's steel in 2023. Further refinements in the process, such as basic oxygen steelmaking (BOS), largely replaced earlier methods by further lowering the cost of production and increasing the quality of the final product. Today more than 1.6 billion tons of steel is produced annually. Modern steel is generally identified by various grades defined by assorted standards organizations . The modern steel industry
SECTION 60
#17330938359644402-409: The world. Steel is used in buildings, as concrete reinforcing rods, in bridges, infrastructure, tools, ships, trains, cars, bicycles, machines, electrical appliances, furniture, and weapons. Iron is always the main element in steel, but many other elements may be present or added. Stainless steels , which are resistant to corrosion and oxidation , typically need an additional 11% chromium . Iron
4473-697: Was developed in Southern India and Sri Lanka in the 1st millennium BCE. Metal production sites in Sri Lanka employed wind furnaces driven by the monsoon winds, capable of producing high-carbon steel. Large-scale wootz steel production in India using crucibles occurred by the sixth century BC, the pioneering precursor to modern steel production and metallurgy. High-carbon steel was produced in Britain at Broxmouth Hillfort from 490–375 BC, and ultrahigh-carbon steel
4544-823: Was discovered in one of its systems. In July 2020, BlueScope was fined $ 30,000 by the New South Wales Environment Protection Authority for failing to comply with dioxin air emission limits on six occasions between March and April 2020. In response, BlueScope completed air emissions modelling and engaged an independent consultant to undertake a health assessment of the elevated emissions. Finished products are transported around Australia by rail freight operator Pacific National . In February 2007 Pacific National secured Australia's largest ever rail freight contract ($ 1 billion) with BlueScope Steel and OneSteel , to carry approximately three million tonnes of steel product each year for seven years. The contract
4615-534: Was established as an independent governing board in February 2012 separate from the Office of Environment & Heritage . The EPA is the state’s primary environmental regulator, working with businesses, government, community and environment groups to manage and reduce pollution, waste and adverse impacts on the environment. The EPA’s vision is a "Healthy Environment, Healthy Community and Healthy Business". The vision goes to
4686-502: Was formerly used. The Gilchrist-Thomas process (or basic Bessemer process ) was an improvement to the Bessemer process, made by lining the converter with a basic material to remove phosphorus. Another 19th-century steelmaking process was the Siemens-Martin process , which complemented the Bessemer process. It consisted of co-melting bar iron (or steel scrap) with pig iron. These methods of steel production were rendered obsolete by
4757-772: Was originally owned by BlueScope. In March 2012 a new coated steel manufacturing plant was inaugurated in Jamshedpur , India . In February 2014, BlueScope purchased Orrcon Steel from Hills . Its products included RHS, SHS and CHS structural tubular steel, hot-rolled structural steel and fencing, roofing and building accessories. Because of lower energy prices in the United States than in Australia, BlueScope in 2019 decided to expand its investment in America by $ 1 billion. The corporate headquarters are located at Level 24, 181 William Street, Melbourne . The company has 16,000 personnel. Its largest operating plant, an integrated steelworks,
4828-438: Was produced globally, with 630,000,000 tonnes (620,000,000 long tons; 690,000,000 short tons) recycled. Modern steels are made with varying combinations of alloy metals to fulfil many purposes. Carbon steel , composed simply of iron and carbon, accounts for 90% of steel production. Low alloy steel is alloyed with other elements, usually molybdenum , manganese, chromium, or nickel, in amounts of up to 10% by weight to improve
4899-729: Was produced in the Netherlands from the 2nd-4th centuries AD. The Roman author Horace identifies steel weapons such as the falcata in the Iberian Peninsula , while Noric steel was used by the Roman military . The Chinese of the Warring States period (403–221 BC) had quench-hardened steel, while Chinese of the Han dynasty (202 BC—AD 220) created steel by melting together wrought iron with cast iron, thus producing
4970-407: Was renewed for a further seven years from January 2015. In January 2022, Qube Holdings and SCT Logistics will take over from Pacific National. Steel Steel is an alloy of iron and carbon with improved strength and fracture resistance compared to other forms of iron. Because of its high tensile strength and low cost, steel is one of the most commonly manufactured materials in
5041-494: Was subsequently re-established in February 2012 as a statutory authority with an independent governing board. The EPA has offices in Albury , Armidale , Bathurst , Broken Hill , Coffs Harbour , Dubbo , Grafton , Griffith , Kempsey , Newcastle , Parramatta , Queanbeyan , Sydney and Wollongong . The EPA regulates activities that can impact the environment and human health, including: The EPA Strategic Plan 2017–21 lists
#963036