Misplaced Pages

#87912

67-698: Each team has five players on the pitch (and up to three substitutes), who compete to score in their opponent's goal, which is suspended two meters above the water. The ball can be thrown by hand or flicked with the paddle to pass between players and shoot at the goal. Pitches can be set up in swimming pools or any stretch of flat water, which should measure 35 meters by 23 meters. The kayaks are specifically designed for polo, faster and lighter than typical ones. The paddles are lighter and designed with pulling power and ball control in mind, with rounded blades for safety. Nose and tail boat bumpers, body protection, helmets and faceguards are compulsory. Canoe polo originated in

134-571: A battery -powered electric motor to drive a propeller or flippers, a sail (which essentially modifies it into a sailboat ), or even a completely independent gasoline outboard engine (which converts it into a de facto motorboat ). The kayak was first used by the indigenous Aleut , Inuit , Yupik and possibly Ainu people hunters in subarctic regions of the world. Kayaks ( Inuktitut : qajaq ( ᖃᔭᖅ Inuktitut pronunciation: [qaˈjaq] ), Yup'ik : qayaq (from qai- "surface; top"), Aleut : Iqyax ) were originally developed by

201-760: A combination thereof, and a skin of water-resistant and durable fabric. Many types have air sponsons built into the hull, making the kayak float even if flooded. Most modern kayaks differ greatly from the original traditional subarctic kayaks in design, manufacturing and usage. They are often designed with computer-aided design (CAD) software, often in combination with CAD customized for naval design. Human-powered watercraft Human-powered watercraft are watercraft propelled only by human power , instead of being propelled by wind power (via one or more sails ) or an engine . The three main methods of exerting human power are: While most human-powered watercraft use buoyancy to maintain their position relative to

268-666: A few companies, priced US$ 4,000 and up. An experienced woodworker can build one for about US$ 400 in 200 hours, though the exact cost and time depend on the builder's skill, the materials and the size and design. As a second kayak project, or for the serious builder with some woodworking expertise, a strip–built boat can be an impressive piece of work. Kits with pre-cut and milled wood strips are commercially available. Skin-on-frame (SOF) boats are often more traditional in design, materials, and construction. They were traditionally made with driftwood frames, jointed, pegged , and lashed together, and covered with stretched seal skin, as those were

335-424: A general rule, a longer kayak is faster: it has a higher hull speed . It can also be narrower for a given displacement, reducing the drag, and it will generally track (follow a straight line) better than a shorter kayak. On the other hand, it is less maneuverable. Very long kayaks are less robust, and may be harder to store and transport. Some recreational kayak makers try to maximize hull volume (weight capacity) for

402-631: A given length as shorter kayaks are easier to transport and store. Kayaks that are built to cover longer distances such as touring and sea kayaks are longer, generally 4.9 to 5.8 m (16 to 19 ft). With touring kayaks the keel is generally more defined (helping the kayaker track in a straight line). Whitewater kayaks, which generally depend upon river current for their forward motion, are short, to maximize maneuverability. These kayaks rarely exceed 2.4 m (8 ft) in length, and play boats may be only 1.5–1.8 m (5–6 ft) long. Recreational kayak designers try to provide more stability at

469-472: A heavily rockered boat is less likely to lock into the wave as the bow and stern are still above water. A boat with less rocker cuts into the wave and makes it harder to turn while surfing. The overall width of a kayak's cross-section is its beam . A wide hull is more stable and packs more displacement into a shorter length. A narrow hull has less drag and is generally easier to paddle; in waves, it will ride more easily and stay dryer. A narrower kayak makes

536-502: A higher center of gravity. A paddler with narrow shoulders will also want a narrower kayak. Newcomers will often want a craft with high primary stability (see above). The southern method is a wider kayak. The West Greenland method is a removable pair of outriggers, lashed across the stern deck. Such an outrigger pair is often homemade of a small plank and found floats such as empty bottles or plastic ducks. Outriggers are also made commercially, especially for fishing kayaks and sailing. If

603-417: A kayak feels when put on edge or when waves are passing under the hull perpendicular to the length of the boat. For kayak rolling , tertiary stability, or the stability of an upside-down kayak, is also important (lower tertiary stability makes rolling up easier). Primary stability is often a big concern to a beginner, while secondary stability matters both to beginners and experienced travelers. By example,

670-470: A low center of gravity (COG) will find all boats more stable; for a paddler with a high center of gravity, all boats will feel tippier. On average, women have a lower COG than men. Women generally may fit a kayak about 10% narrower than the kayak that would fit a similarly sized man. Commercial kayaks made for women are rare. Unisex kayaks are built for men. Younger children have proportionately smaller and lighter bodies, but near-adult-size heads, and thus

737-406: A machine. The deck and hull are often made separately and then joined at a horizontal seam. Plastic kayaks are rotationally molded ('rotomolded') from a various grades and types of polyethylene resins ranging from soft to hard. Such kayaks are seamless and particularly resistant to impact, but heavy. Inflatable kayaks are increasingly popular due to their ease of storage and transport, as well as

SECTION 10

#1733085923088

804-401: A personal craft, each built by the man who used it and closely fitting his size for maximum maneuverability . For this reason, kayaks were often designed ergonomically using one's own body proportions as units of measure . The paddler wore a tuilik , a garment that was stretched over the rim of the kayak coaming and sealed with drawstrings at the coaming, wrists, and hood edges. This enabled

871-765: A promotional match between the University of Kashmir and Islamia College on the waters of Nigeen Lake in Srinagar. Later this event was included in the annual water sports calendar of the university. The J&K Water Sports Association is also promoting this sport in Jammu and Kashmir on a larger scale. The game is now played in many countries throughout all inhabited continents, for recreation and serious sport. The sport has World Championships every two years and European, Asian, African, and Pan American Continental Championships held every year in between World Championship years. Internationally

938-402: A right angle, in a position called the "L" kayaking position. Other kayaks offer a different sitting position, in which the paddler's legs are not stretched out in front of them, and the thigh brace bears more on the inside than the top of the thighs (see diagram). A kayaker must be able to move the hull of their kayak by moving their lower body, and brace themselves against the hull (mostly with

1005-435: A series of small holes are drilled along the edges. Copper wire is then used to "stitch" the pieces together through the holes. After the pieces are temporarily stitched together, they are glued with epoxy and the seams reinforced with fiberglass. When the epoxy dries, the copper stitches are removed. Sometimes the entire boat is then covered in fiberglass for additional strength and waterproofing though this adds greatly to

1072-459: A single oar, is sweep or sweep-oar rowing . In this case the rowers are usually paired so that there is an oar on each side of the boat. Sweep-oared craft include: Moving a single stern-mounted oar from side to side, while changing the angle of the blade so as to generate forward thrust on both strokes, is single-oar sculling . Single-oar sculled craft include: Paddled watercraft, or paddlecraft, uses one or more handheld paddles , each with

1139-815: A sit-in kayak feel more secure in a kayak with a weight capacity substantially more than their own weight. Maximum volume in a sit-in kayak is helped by a wide hull with high sides. But paddling ease is helped by lower sides where the paddler sits and a narrower width. While the kayak's buoyancy must be more than the loaded kayak, the optimal amount of excess buoyancy varies somewhat with kayak type, purpose, and personal taste ( squirt boats , for instance, have very little positive buoyancy). Displacements vary with paddler weight. Most manufacturers include kayaks for paddlers weighing 65–85 kg (143–187 lb), with some kayaks for paddlers down to 50 kg (110 lb). Kayaks made for paddlers under 45 kg (100 lb) are almost all very beamy and intended for beginners. As

1206-482: A somewhat shorter paddle appropriate and a shorter paddle puts less strain on the shoulder joints. Some paddlers are comfortable with a sit-in kayak so narrow that their legs extend fairly straight out. Others want sufficient width to permit crossing their legs inside the kayak. Primary (sometimes called initial ) stability describes how much a boat tips, or rocks back and forth when displaced from level by paddler weight shifts. Secondary stability describes how stable

1273-579: A steeper angle between gunwale and stem , which lends maneuverability. Most of the Aleut people in the Aleutian Islands eastward to Greenland Inuit relied on the kayak for hunting a variety of prey—primarily seals, though whales and caribou were important in some areas. Skin-on-frame kayaks are still being used for hunting by Inuit in Greenland, because the smooth and flexible skin glides silently through

1340-415: A stitch & glue hull and a strip-built deck. Kayaks made from wood sheathed in fiberglass have proven successful, especially as the price of epoxy resin has decreased in recent years. Stitch & glue designs typically use modern, marine-grade plywood with a thickness of about 3 to 5 mm (0.12 to 0.20 in). After cutting out the required pieces of hull and deck (kits often have these pre-cut),

1407-884: A stock off the shelf traditional design 20 foot long by 31 inch wide fiberglass tandem kayak paddled over 2,000 miles non-stop from Monterey , California to Hawaii , landing his vessel there on August 27, 1987, after 64 days of paddling. Gillet had navigated his kayak by using a traditional sextant and compass , along with approximately 600 pounds of food and water, including a device to convert sea water to fresh water. Within six days of reaching Hawaii, both he and his yellow kayak were featured on The Tonight Show , hosted by Johnny Carson . Inflatable rubberized fabric boats were first introduced in Europe and rotomolded plastic kayaks first appeared in 1973. Most kayaks today are made from roto-molded polyethylene resins. The development of plastic and rubberized inflatable kayaks arguably initiated

SECTION 20

#1733085923088

1474-599: A wide, flat-bottomed kayak will have high primary stability and feel very stable on flat water. However, when a steep wave breaks on such a boat, it can be easily overturned because the flat bottom is no longer level. By contrast, a kayak with a narrower, more rounded hull with more hull flare can be edged or leaned into waves and (in the hands of a skilled kayaker) provides a safer, more comfortable response on stormy seas. Kayaks with only moderate primary, but excellent secondary stability are, in general, considered more seaworthy , especially in challenging conditions. The shape of

1541-444: A widened blade on one or both ends, to push water and propel the watercraft.. Commonly seen paddlecrafts include: Pedals are attached to a crank and propelled in circles, or to a treadle and reciprocated , with the feet. The collected power is then transferred to the water with a paddle wheel , flippers , or to the air or water with a propeller . Pedaled craft include: A pole is held with both hands and used to push against

1608-433: Is a large open-sea canoe, ranging from 5.2 to 9.1 m (17 to 30 ft), made with seal skins and wood, originally paddled with single-bladed paddles and typically had more than one paddler. Subarctic builders designed and built their boats based on their own experience and that of the generations before them passed on through oral tradition. The word "kayak" means "man's boat" or "hunter's boat", and subarctic kayaks were

1675-399: Is an integral part of the structure, and will also affect the trade-offs made. Attempting to lift and carry a kayak by oneself or improperly is a significant cause of kayaking injuries. Good lifting technique, sharing loads, and not using needlessly large and heavy kayaks prevent injuries. If the displacement of a kayak is not enough to support the passenger(s) and gear, it will sink. If

1742-495: Is played either indoors in swimming pools or outdoors on a pitch which should measure 35 meters by 23 meters. The boundaries of the pitch are ideally marked using floating ropes (similar to lane markers in swimming), although for smaller venues the edges of the pool are frequently used. The area approximately 6 meters in front of each the goal can be defined as the Zone. This area is where defending players create formations to defend

1809-438: Is sometimes covered by a spray deck that prevents unwanted entry of water from waves or splashes. Even within these confines, kayaks vary vastly in respect to materials, length, and width, with some kayaks such as the sprint kayak designed to be fast and light, and others such as the whitewater kayak designed to be sturdy and maneuverable. Some modern paddlecrafts, which still claim the title "kayak", remove integral parts of

1876-514: The Bering Sea & Aleutian Islands , the oldest design, whose rounded shape and numerous chines give them an almost blimp -like appearance; West Greenland kayaks, with fewer chines and a more angular shape, with gunwales rising to a point at the bow and stern ; and East Greenland kayaks that appear similar to the West Greenland style, but often fit more snugly to the paddler and possess

1943-669: The Green River (Colorado River tributary) in Dinosaur National Monument in 1939 and the Middle Fork Salmon River in 1940. In 1941, Grant paddled a foldboat through Grand Canyon National Park . He outfitted his foldboat, named Escalante, with a sponson on each side of his boat and filled the boat with beach balls. As with nearly all American foldboat enthusiasts of the day, he did not know how to roll his boat. Fiberglass mixed with resin composites, invented in

2010-506: The Inuit , Yup'ik , and Aleut . They used the boats to hunt on inland lakes, rivers and coastal waters of the Arctic Ocean , North Atlantic , Bering Sea and North Pacific oceans. These first kayaks were constructed from stitched seal or other animal skins stretched over a wood or whalebone-skeleton frame. (Western Alaskan Natives used wood whereas the eastern Inuit used whalebone due to

2077-487: The Inuktitut word qajaq ( IPA: [qajɑq] ). In British English, the kayak is also considered to be a kind of canoe . There are countless different types of kayaks due to the craft being easily adaptable for different environments and purposes. The traditional kayak has an enclosed deck and one or more cockpits, each seating one occupant or kayaker , differentiating the craft from an open-deck canoe. The cockpit

Canoe polo - Misplaced Pages Continue

2144-427: The " eskimo roll " and rescue to become the preferred methods of recovery after capsizing, especially as few Inuit could swim; their waters are too cold for a swimmer to survive for long. Instead of a tuilik , most traditional kayakers today use a spray deck made of waterproof synthetic material stretchy enough to fit tightly around the cockpit rim and body of the kayaker, and which can be released rapidly from

2211-629: The 1930s and 1940s, were soon used to make kayaks and this type of watercraft saw increased use during the 1950s, including in the US. Kayak Slalom World Champion Walter Kirschbaum built a fiberglass kayak and paddled it through Grand Canyon in June 1960. He knew how to roll and only swam once, in Hance Rapid (see List of Colorado River rapids and features ). Like Grant's foldboat, Kirschbaum's fiberglass kayak had no seat and no thigh braces. In June 1987, Ed Gillet, using

2278-733: The Danube and four years later reached the Australian coast after having traveled roughly 14,000 miles across the Pacific. These watercraft were brought to the United States and used competitively in 1940 at the first National Whitewater Championship held in America near Middledam, Maine, on the Rapid River (Maine) . One "winner," Royal Little, crossed the finish line clinging to his overturned foldboat. Upstream,

2345-406: The ability to be deflated for extended portage. Although slower than hardshell kayaks, many higher-end models often constructed of hypalon, as opposed to cheaper PVC designs, begin to approach the performance of traditional sea kayaks. Being inflatable they are virtually unsinkable and often more stable than hardshell designs. New drop-stitch technology means slab, rather than tube shapes are used in

2412-406: The ball, or jostle for position within 6 meters of the goal. There are two referees (one on each side-line) and they are on foot rather than in boats. The score is kept by the scorekeeper and the timekeeper monitors the playing time and sending-off times. The goal lines are monitored by two line judges. Before play commences scrutineers check all kit for compliance with regulations. Canoe polo

2479-482: The ball. A shot clock may be used to speed up the game. The attacking team have 60 seconds to have a shot on the goal or they lose possession. The shot clock is reset when the ball is intercepted by the opposing team or the attacking team loses possession. The shot clock is a recent addition to the rules, and due to the expense and complexity of the equipment is not used universally. There are several attacking and defensive tactics all with different variations. Most of

2546-403: The builder's personal use. Fiberglass hulls are stiffer than polyethylene hulls, but they are more prone to damage from impact, including cracking. Most modern kayaks have steep V sections at the bow and stern, and a shallow V amidships . Fiberglass kayaks may be "laid-up" in a mold by hand, in which case they are usually more expensive than polyethylene kayaks, which are rotationally molded in

2613-586: The cockpit to permit easy exit (in particular in a wet exit after a capsizing ). Inuit kayak builders had specific measurements for their boats. The length was typically three times the span of his outstretched arms. The width at the cockpit was the width of the builder's hips plus two fists (sometimes less). The typical depth was his fist plus the outstretched thumb (hitch hiker). Thus typical dimensions were about 5.2 m (17 ft) long by 51–56 cm (20–22 in) wide by 18 cm (7 in) deep. Traditional kayaks encompass three types: Baidarkas , from

2680-438: The cross section affects stability, maneuverability, and drag. Hull shapes are categorized by roundness, flatness, and by the presence and angle of chines . This cross-section may vary along the length of the boat. A chine typically increases secondary stability by effectively widening the beam of the boat when it heels (tips). A V-shaped hull tends to travel straight (track) well but makes turning harder. V-shaped hulls also have

2747-439: The designs with higher inflation pressures (up to 0.7 bar (10 psi)), leading to considerably faster, though often less stable kayaks which rival hardshell boats in performance. Solid wooden hulls don't necessarily require significant skill and handiwork, depending on how they are made. Three main types are popular, especially for the home builder: plywood stitch & glue (S&G), strip-built , and hybrids which have

Canoe polo - Misplaced Pages Continue

2814-408: The development of freestyle kayaking as we see it today since these boats could be made smaller, stronger, and more resilient than fiberglass boats. Typically, kayak design is largely a matter of trade-offs: directional stability ("tracking") vs maneuverability; stability vs speed; and primary vs secondary stability. Multihull kayaks face a different set of trade-offs. The paddler's body shape and size

2881-490: The displacement is excessive, the kayak will float too high, catch the wind and waves uncomfortably, and handle poorly; it will probably also be bigger and heavier than it needs to be. Being excessively big will create more drag, and the kayak will move more slowly and take more effort. Rolling is easier in lower-displacement kayaks. On the other hand, a higher deck will keep the paddler(s) drier and make self-rescue and coming through surf easier. Many beginning paddlers who use

2948-416: The feet) on each stroke. Most kayaks therefore have footrests and a backrest. Some kayaks fit snugly on the hips; others rely more on thigh braces. Mass-produced kayaks generally have adjustable bracing points. Many paddlers also customize their kayaks by putting in shims of closed-cell foam (usually EVA ), or more elaborate structures, to make it fit more tightly. Paddling puts substantial force through

3015-473: The floats are set so that they are both in the water, they give primary stability, but produce more drag . If they are set so that they are both out of the water when the kayak is balanced, they give secondary stability. Some kayak hulls are categorized according to the shape from bow to stern Common shapes include: Traditional-style and some modern types of kayaks (e.g. sit-on-top) require that paddler be seated with their legs stretched in front of them, in

3082-405: The goal from attackers. The game is officially played as a 14- to 20-minute game consisting of two 7- to 10-minute halves. The teams change ends at the half-time period, which is 1 to 3 minutes long. Each half begins with a "sprint" where each team lines up against its goal-line and the ball is thrown into the middle of the pitch by the referee. One player from each team sprints to win possession of

3149-415: The greatest secondary stability. Conversely, flat-bottomed hulls are easy to turn, but harder to direct in a constant direction. A round-bottomed boat has minimal area in contact with the water, and thus minimizes drag; however, it may be so unstable that it will not remain upright when floating empty, and needs continual effort to keep it upright. In a skin-on-frame kayak, chine placement may be constrained by

3216-780: The late 19th century in Great Britain, with Punch magazine publishing a picture entitled "Polo on the Sea" in 1875. The modern sport was born in the demonstration event held at the National Canoe Exhibition in the Crystal Palace National Sports Centre of London in 1970. In response to the interest created at the Crystal Palace event, the first National Canoe Polo subcommittee of the British Canoe Union

3283-448: The legs, alternately with each stroke. The knees should therefore not be hyperextended . Separately, if the kneecap is in contact with the boat, or the knee joint is in torsion , this will cause pain and may injure the knee. Insufficient foot space will cause painful cramping and inefficient paddling. The paddler should generally be in a comfortable position. Today almost all kayaks are commercial products intended for sale rather than for

3350-454: The lightest kayaks. Like the older skin-on-frame kayaks, they are often home-built to fit a specific paddler. Engineer Xyla Foxlin built a kayak out of transparent fibreglass as well as LEDs to create a floating vessel that lights up at night, which she calls the Rainbowt . A special type of skin-on-frame kayak is the folding kayak . It has a collapsible frame, of wood, aluminum or plastic, or

3417-594: The most readily available materials in the Arctic regions (other skins and baleen framing members were also used at need). A "poor man's kayak" might be frameless and stuffed with a snow "frame". Today, seal skin is usually replaced with canvas or nylon cloth covered with paint , polyurethane , or a hypalon rubber coating, on a wooden or aluminum frame. Modern skin-on-frame kayaks often possess greater impact resistance than their fiberglass counterparts, but are less durable against abrasion or sharp objects. They are often

SECTION 50

#1733085923088

3484-402: The need to avoid the bones of the pelvis. Sea kayaks , designed for open water and rough conditions, are generally narrower at 55–65 cm (22–25 in) and have more secondary stability than recreational kayaks, which are wider 65–75 cm (26–30 in), and have a flatter hull shape and more primary stability. The body of the paddler must also be taken into account. A paddler with

3551-456: The opponent's arm, head or body that may result in personal injury and is illegal. Significant contact – Any high impact or continuous contact, that may result in equipment damage or personal injury. Specialized equipment is needed to play Canoe polo. Items required are: Kayak A kayak is a small, narrow human-powered watercraft typically propelled by means of a long, double-bladed paddle . The word kayak originates from

3618-399: The price of reduced speed, and compromise between tracking and maneuverability, ranging from 2.7–4.3 m (9–14 ft). Length alone does not fully predict a kayak's maneuverability: a second design element is rocker , i.e. its lengthwise curvature. A heavily rockered boat curves more, shortening its effective waterline. For example, an 5.5 m (18 ft) kayak with no rocker is in

3685-468: The river was "strewn with many badly buffeted and some wrecked boats." Two women were in the competition, Amy Lang and Marjory Hurd. With her partner Ken Hutchinson, Hurd won the double canoe race. Lang won the doubles foldboat event with her partner, Alexander "Zee" Grant. In the late 1930s and early 1940s, Alexander "Zee" Grant was most likely America's best foldboat pilot. Grant kayaked the Gates of Lodore on

3752-697: The roll taught this technique to Europeans during this time period. These boats were tough and intrepid individuals were soon doing amazing things in them. In June 1928, a German named Franz Romer Sea kayak rigged his 6.1 m (20 ft) long foldboat with a sail and departed from Las Palmas in the Canary Islands carrying 270 kg (590 lb) of tinned food and 210 L (55 U.S. gal) of water. Fifty-eight days and 5,060 km (2,730 nmi) later he reached Saint Thomas, U.S. Virgin Islands . Another German, Oskar Speck , paddled his foldboat down

3819-473: The rules concern the safety of the players involved or are designed to keep the game fast-paced and exciting to play and watch. Three general principles can be applied when determining the severity of a foul. Deliberate foul – A foul where no effort was made to avoid the illegal play. Any deliberate foul should receive a minimum of a green card- either immediately or at the next break in play if playing advantage. Dangerous foul – Is significant contact with

3886-451: The shape and size of the boat determines performance and optimal uses. The hull and deck are built with thin strips of lightweight wood, often thuja (Western Red cedar) , pine or redwood . The strips are edge-glued together around a form, stapled or clamped in place, and allowed to dry. Structural strength comes from a layer of fiberglass cloth and epoxy resin, layered inside and outside the hull . Strip–built kayaks are sold commercially by

3953-547: The sport is organized by the Canoe Polo committee of the International Canoe Federation , as one of the disciplines of the sport of canoeing. The game is often described as a combination of water polo , basketball and kayaking . The tactics and playing of the game are not unlike basketball or water polo but with the added complexity of the boats, which can be used to tackle an opposition player in possession of

4020-469: The surface of the water, a few, such as human-powered hydrofoils and human-powered submarines , use hydrofoils , either alone or in addition to buoyancy. Oars are held at one end, have a blade on the other end, and pivot in between in oarlocks . Oared craft include: Using oars in pairs, with one hand on each oar, is two-oar sculling . The oars may also be called sculls. Two-oared sculled craft include: Using oars individually, with both hands on

4087-469: The traditional design; for instance, by eliminating the cockpit and seating the paddler on top of a canoe-like open deck, commonly known as a sit-on-top kayak. Other designs include inflated air chambers surrounding the craft; replacing the single hull with twin hulls; and replacing handheld paddles with other human-powered propulsion methods such as pedal -driven propeller and "flippers". Some kayaks are also fitted with external sources of propulsion, such as

SECTION 60

#1733085923088

4154-589: The treeless landscape) . Kayaks are believed to be at least 4,000 years old. The oldest kayaks remaining are exhibited in the North America department of the State Museum of Ethnology in Munich , with the oldest dating from 1577. Subarctic people made many types of boats for different purposes. The Aleut baidarka was made in double or triple cockpit designs, for hunting and transporting passengers or goods. An umiak

4221-446: The water from end to end. In contrast, the bow and stern of a rockered boat are out of the water, shortening its lengthwise waterline to only 4.9 m (16 ft). Rocker is generally most evident at the ends, and in moderation improves handling. Similarly, although a rockered whitewater boat may only be about a meter shorter than a typical recreational kayak, its waterline is far shorter and its maneuverability far greater. When surfing,

4288-399: The waves. Contemporary traditional-style kayaks trace their origins primarily to the native boats of Alaska, northern Canada , and Southwest Greenland . The use of fabric kayaks on wooden frames called a foldboat or folding kayak (German Faltboot or Hardernkahn) became widely popular in Europe beginning in 1907 when they were mass-produced by Johannes Klepper and others. This type of kayak

4355-517: The weight and is unnecessary. Construction is fairly straightforward, but because plywood does not bend to form compound curves, design choices are limited. This is a good choice for the first-time kayak builder as the labor and skills required (especially for kit versions) is considerably less than for strip-built boats which can take three times as long to build. Strip-built designs are similar in shape to rigid fiberglass kayaks but are generally both lighter and tougher. Like their fiberglass counterparts

4422-563: Was formed, and it was this committee that developed the modern framework of the game. The National Championships were held every year at the National Canoe Exhibition, and this activity led to the inclusion of Canoe Polo in the demonstration games at Duisburg , Germany in 1987. In India, Canoe Polo was initiated by the University of Kashmir , Srinagar in 2008 when the University Aquatics Coach Muhammad Yusuf conducted

4489-434: Was introduced to England and Europe by John MacGregor (sportsman) in 1860, but Klepper was the first person to mass-produce these boats made of collapsible wooden frames covered by waterproof rubberized canvas. By 1929, Klepper and Company were making 90 foldboats a day. Joined by other European manufacturers, by the mid-1930s there were an estimated half-million foldboat kayaks in use throughout Europe. First Nation masters of

#87912