The Aurora Subdivision or Aurora Sub is a railway line in Wisconsin and Illinois operated by BNSF Railway . It is part of BNSF's Chicago , Illinois, to Seattle , Washington, Northern Transcon . This segment runs about 262 miles (422 km) from the St. Croix Subdivision in La Crosse, Wisconsin , to the Chicago Subdivision in Aurora, Illinois .
58-623: The original line created by the Chicago, Burlington and Quincy Railroad ran out of Aurora, Illinois to Oregon, Illinois . In 1885, the line was continued from Oregon to connect to St. Paul, Minnesota . From then on, this track hosted some of the fastest trains in the world for the time period, including the Chicago, Burlington and Quincy Railroad 's Twin Cities Zephyr . The Northern Pacific North Coast Limited and Great Northern Empire Builder also ran to Minneapolis–Saint Paul and on to
116-514: A central role in bringing air brakes to freight service. The railroad had one of the first hump classification yards at its Cicero Avenue Yard in Chicago, allowing an operator in a tower to line switches remotely and allowing around-the-clock classification. The company also tested the twin cylinder car . Burlington-Rock Island Railroad The Burlington-Rock Island Railroad ( reporting mark BRI ) came into existence on July 7, 1930, through
174-579: A final freight train on the Leadville-Climax branch in Colorado. On July 1, 1965, Harry Murphy retired from his position as president of the CB&Q (he remained on the railroad as a director until October), and former Frisco Railway president Louis W. Menk took over as president and CEO. During his presidency, Louis Menk explored ways to reduce costs for the CB&Q's passenger operations and to reshape
232-460: A light, powerful diesel engine that could stand the rigors of continuous, unattended daily service. The experiences of developing these engines can be summed up shortly by General Motors Research vice-president Charles Kettering : "I do not recall any trouble with the dip stick." Ralph Budd, accused of gambling on diesel power, chirped that "I knew that the GM people were going to see the program through to
290-466: A massive 6,000-pound flywheel), and it had issues with overheating (even with the best metals of the day, its cylinder heads and liners would warp and melt in a matter of minutes), so it was therefore deemed impractical. Diesel engines of that era were obese, stationary monsters and were best suited for low-speed, continuous operation. It was not reliable for a railroad locomotive; there was no diesel engine suitable for that purpose then. Always innovating,
348-710: A subsequent public outcry and protest over the program's cancellation, the No. 4960 locomotive pulled the railroad's final excursion train on July 17. The railroad operated a number of streamlined passenger trains known as the Zephyrs which were one of the most famous and largest fleets of streamliners in the United States. The Burlington Zephyr , the first American diesel -electric powered streamlined passenger train, made its noted "dawn-to-dusk" run from Denver, Colorado , to Chicago, Illinois , on May 26, 1934. On November 11, 1934,
406-667: Is intermodal traffic and some freight traffic. Amtrak trains heading westward along the Chicago Subdivision immediately turn southwest toward Galesburg, Illinois , along the Mendota Subdivision as they pass through Aurora, but they currently (as of 2010) do not stop in the city. Metra commuter rail service to Chicago via the BNSF Railway Line terminates at the Aurora Transportation Center , but this
464-511: Is at the end of a spur parallel to the main line. There was an old train station on Broadway (Route 25) about a mile south of the Aurora Transportation Center, but it was demolished in 2013, following damage from a thunderstorm. The Aurora Subdivision is mostly single track with sidings between Aurora to Plum River, south of Savanna , with the exception of double track from Steward through Rochelle to Flagg Center. At Plum River, it
522-563: Is double track up until it crosses the Wisconsin River near Wyalusing State Park in Wisconsin, where it becomes single track again. The single track continues for a short distance until Crawford, south of Prairie du Chien , where it once again becomes double track to Grand Crossing, where the line becomes the St. Croix Subdivision. In La Crosse, the branch at Herrington had continued North and West to
580-938: The Texas Rocket . The Rocket was replaced in January 1945 by the Twin Star Rocket , listed as a Rock Island train running between Houston and Minneapolis-St. Paul . A major change in the BRI landscape came in 1950 when the Rock Island partnered with the Fort Worth and Denver Railway to lease the BRI's line section from Teague to Houston, which they called the Joint Texas division. The BRI never lived up to its financial promise, finally succumbing to foreclosure in April 1964. Its assets were purchased by
638-570: The Burlington , CB&Q , or as the Q , it operated extensive trackage in the states of Colorado , Illinois , Iowa , Missouri , Nebraska , Wisconsin , Wyoming , and also in Texas through subsidiaries Colorado and Southern Railway , Fort Worth and Denver Railway , and Burlington-Rock Island Railroad . Its primary connections included Chicago , Minneapolis–Saint Paul , St. Louis , Kansas City , and Denver . Because of this extensive trackage in
SECTION 10
#1733086337460696-616: The Galena and Chicago Union Railroad would bypass their towns in favor of West Chicago on its route; at the time, that was the only line running west from Chicago. The Aurora Branch was built from Aurora, through Batavia, to Turner Junction in what is now West Chicago. The line was built with old strap rail and minimal, if any, grading. Using a leased locomotive and cars, the Aurora Branch ran passenger and freight trains from Aurora to Chicago via its own line from Aurora to Turner Junction and one of
754-776: The Mississippi River at both Burlington and Quincy, giving the railroad through connections with the Burlington and Missouri River Railroad (B&MR) in Iowa and the Hannibal & St. Joseph Railroad (H&StJ) in Missouri. In 1860 the H&SJ carried the mail to the Pony Express upon reaching the Missouri River at St. Joseph, Missouri . In 1862 The first Railway Post Office was inaugurated on
812-619: The Trailways Transportation System , and still provides intercity service to this day as Burlington Trailways . 1940 was the final year the CB&Q added steam locomotives to their roster, having completed construction on their O-5A class locomotives at the West Burlington, Iowa shops. With their freight traffic weighing 31 million tons that year, the CB&Q saw no further necessity for any more steam or diesel locomotives to be added to their roster. In 1942, following
870-641: The Twin Cities , the Burlington Route formed a natural connection between Hill's home town (and headquarters) of St. Paul, Minnesota , and the railroad hub of Chicago. Moreover, Hill was willing to meet Perkins' $ 200-a-share asking price for the Burlington's stock. By 1900, Hill's Great Northern, in conjunction with the Northern Pacific Railway , held nearly 100 percent of Burlington's stock. By 1899,
928-420: The U.S. Supreme Court . The only major strike in the line's history came in 1888, the Burlington railway strike of 1888 . Unlike most strikes, which were based on unskilled workers, this one was based on the highly skilled well-paid engineers and firemen, a challenge to management prerogatives. A settlement would have been much cheaper, but President Perkins was determined to assert ownership rights and destroy
986-523: The 23 miles (37 km) of track from Hubbard to Mexia. Along with their partner the CB&Q, the BRI inaugurated the first streamlined passenger train service in Texas on October 1, 1936, the Sam Houston Zephyr . Listed as a CB&Q train, it ran from Dallas-Fort Worth to Houston. Not to be outdone, Rock Island in cooperation with the BRI inaugurated its own named streamlined passenger train in 1937,
1044-413: The BRI in 5 year intervals; the Rock Island started first and controlled the BRI until 1935. Soon after the reorganization an abandonment of the original right of way between Mexia and Cleburne began and was implemented in three stages, the first being the 30-mile (48 km) Cleburne to Hillsboro section (1932), next the 35-mile (56 km) section from Hillsboro to Hubbard (1935), and finally in 1942,
1102-640: The Burlington Railroad must be included into a powerful transcontinental system. Though the railroad stretched as far west as Denver and Billings, Montana , it had failed to reach the Pacific Coast during the 1880s and 1890s, when construction was less expensive. Though approached by E. H. Harriman of the Union Pacific Railroad , Perkins felt his railroad was a more natural fit with James J. Hill 's Great Northern Railway . With its river line to
1160-624: The Burlington Route was able to enter the trade markets in 1862. From that year to date, the railroad and its successors have paid dividends continuously, and never run into debt or defaulted on a loan—the only Class I U.S. railroad for which this is true. After extensive trackwork was planned, the Aurora Branch changed its name to the Chicago and Aurora Railroad in June 1852, and to Chicago, Burlington, and Quincy Railroad in 1856, and shortly reached its two other namesake cities, Burlington, Iowa , and Quincy, Illinois . In 1868 CB&Q completed bridges over
1218-613: The Burlington by GN and NP, expansion continued. In 1908, the CB&Q purchased both the Colorado and Southern Railway and the Fort Worth and Denver Railway , giving it access south to Dallas and the Gulf of Mexico ports in Houston and Galveston . It also extended its reach south in the Mississippi Valley region by opening up a new line from Concord, Illinois , south to Paducah, Kentucky . It
SECTION 20
#17330863374601276-661: The Burlington included: The California Zephyr is still operated daily by Amtrak as trains Five (westbound) and Six (eastbound). Another Amtrak train, the Illinois Zephyr , is a modern descendant of the Kansas City Zephyr and the American Royal Zephyr services. Multiple locomotives from the Burlington have been preserved, including two Zephyr power units, thirty-five steam locomotives , and thirty-four diesel locomotives . Originally, 5632 (O-5B 4-8-4)
1334-544: The CB&Q created a subsidiary, the Burlington Transportation Company , to operate intercity buses in tandem with its railway network. On January 1, 1932, the CB&Q received a new president; former Great Northern Railroad president Ralph Budd . By which time, the CB&Q was facing a decline in passenger ridership from the Depression, and U.S. President Franklin D. Roosevelt was exploring ways to help
1392-749: The CB&Q merged with the Great Northern, Northern Pacific, and the Spokane, Portland and Seattle (SP&S) railroads on March 2, 1970, to form the Burlington Northern Railroad (BN), with Louis Menk serving as the company's first president and CEO (twenty-six years later, the BN and Santa Fe Railroads merged to become the Burlington Northern and Santa Fe Railway (BNSF)). Most passenger operations would be assumed in 1971 by Amtrak . Beginning in
1450-741: The CB&Q's commercial passenger operations was completed on September 26, 1952, when the last of the 4-6-2 locomotives that operated for the Chicago-Aurora suburban service were retired; the remaining steam locomotives on the CB&Q were primarily reassigned as freight haulers and yard switchers. The first division on the CB&Q to be fully dieselized was the Casper Division in Wyoming, where EMD GP7 road switchers were delivered in 1951. In 1955, regular performance on class 3 overhauls on steam locomotives were discontinued, and Harry C. Murphy opted for
1508-408: The CB&Q's new steam excursion program, only two of which remained operational by 1961: 2-8-2 No. 4960 and 4-8-4 No. 5632. In 1962, the CB&Q's passenger department began sponsoring the excursion runs by offering ticket discounts to paying customers, and the Burlington began to host several school trains for school students. In 1964, steam excursion operations on the railroad had dwindled, in
1566-505: The CB&Q, completed in 1922. Burlington's rapid expansion after the American Civil War was based upon sound financial management, dominated by John Murray Forbes of Boston and assisted by Charles Elliott Perkins . Perkins was a powerful administrator who eventually forged a system out of previously loosely held affiliates, virtually tripling Burlington's size during his presidency from 1881 to 1901. Ultimately, Perkins believed
1624-654: The Downtown La Crosse Station. It then headed Northeast to re-join the main at a point north of Grand Crossing where the North La Crosse depot still stands today. Chicago, Burlington and Quincy Railroad The Chicago, Burlington and Quincy Railroad ( reporting mark CBQ ) was a railroad that operated in the Midwestern United States . Commonly referred to as the Burlington Route ,
1682-475: The G&CU's two tracks east from there to Chicago. The G&CU required the Aurora Branch to turn over 70 percent of their revenue per ton-mile handled on that railroad; as a result, in the mid-1850s, surveys were ordered to determine the best route for a railroad line to Chicago. The line from Aurora to Chicago was built through the fledgling towns of Naperville , Lisle , Downers Grove , Hinsdale , Berwyn , and
1740-457: The H&StJ to sort mail on the trains way across Missouri. The B&MR continued building west into Nebraska as a separate company, the Burlington & Missouri River Rail Road , founded in 1869. During the summer of 1870 it reached Lincoln , the newly designated capital of Nebraska and by 1872 it reached Kearney, Nebraska . That same year the B&MR across Iowa was absorbed by the CB&Q. By
1798-560: The Trinity and Brazos Valley went into receivership in 1914. A series of receivers were appointed including John W. Robbins (1914), L.H. Atwell, Jr, and in 1919, Gen. John A. Hulen. Hulen eventually became the first president of the BRI when the T&BV was reorganized. Hulen had begun improvements on the Trinity and Brazos while he was receiver, and this trend was continued after the reorganization. The two parent companies rotated their management of
Aurora Subdivision - Misplaced Pages Continue
1856-461: The United States' entrance into World War II , the railroad's freight traffic increased to 49 million tons, with Ralph Budd (now named President Roosevelt's federal transportation commissioner) poised to ensure his company would help the war effort. In 1943, the War Production Board authorized EMC (now reincorporated as EMD) to construct sixteen FT locomotives for delivery to the CB&Q
1914-615: The company had rostered 1,205 locomotives, 936 passenger cars and 40,720 freight cars. In 1901, a rebuffed Harriman tried to gain an indirect influence over the Burlington by launching a stock raid on the Northern Pacific. Though Hill managed to fend off this attack on his nascent system, it led to the creation of the Northern Securities Company , and later, the Northern Securities Co. v. United States ruling by
1972-507: The following year, by which time, the road's freight traffic peaked 57 million tons. After World War II ended, the CB&Q began ordering additional diesel locomotives from EMD, as part of a $ 140-million program to dieselize their roster. August 31, 1949, was Ralph Budd's final day as president of the railroad before he would retire during that year's Chicago Railroad Fair , and Harry C. Murphy succeeded him in September. Dieselisation of
2030-643: The former Burlington-Rock Island Railroad ). In 1970, it merged with the Northern Pacific Railway and the Great Northern Railway to form the Burlington Northern Railroad . The earliest predecessor of the Chicago, Burlington and Quincy, the Aurora Branch Railroad , was chartered by act of the Illinois General Assembly on October 2, 1848. The charter was obtained by citizens of Aurora and Batavia, Illinois , who were concerned that
2088-534: The last commercial steam assignment for the railroad at Herrin Junction on January 27, 1959 (the only major U.S. railroads to operate revenue steam after this date were Union Pacific, Illinois Central , Nickel Plate Road , Norfolk and Western , Grand Trunk Western , Duluth, Missabe and Iron Range , and Lake Superior and Ishpeming ). CB&Q subsidiary Colorado and Southern eventually ended their commercial steam operations on October 11, 1962, when 2-8-0 No. 641 pulled
2146-476: The midwest and mountain states, the railroad used the advertising slogans "Everywhere West", "Way of the Zephyrs ", and "The Way West". In 1967, it reported 19,565 million net ton-miles of revenue freight and 723 million passenger miles; corresponding totals for C&S were 1,100 and 10 and for FW&D were 1,466 and 13. At the end of the year, CB&Q operated 8,538 route-miles, C&S operated 708, and FW&D operated 1,362 (these totals may or may not include
2204-585: The owning partners, each receiving an uncontested half interest in the property. The railroad's tangible assets became part of the Fort Worth and Denver and Rock Island railroads in 1965 and the Burlington-Rock Island Railroad was no more. Rock Island went out of business on March 31, 1980, leaving the Fort Worth and Denver in sole control; it in turn merged into the Burlington Northern system on December 31, 1982. Burlington Northern would merge with
2262-465: The rail industry improve. Ralph Budd subsequently asked for a streamlined stainless-steel train to be built, and this resulted in the railroad introducing the famous Zephyrs . As early as 1897, the railroad invested in alternatives to steam power, namely, internal-combustion engines. The railroad's shops in Aurora had built a three-horsepower distillate motor in that year, but it was not reliable (requiring
2320-497: The railroad purchased "doodlebug" gas-electric combine cars from Electro-Motive Corporation (EMC) and built their own, sending them out to do the jobs of a steam locomotive and a single car. After the positive results the doodlebug cars created, and after having purchased and used three General Electric steeple-cab switchers powered by distillate engines, Ralph Budd requested the Winton Engine Company to design and construct
2378-566: The railroad's remaining steam fleet to use up their previously-restored mileage throughout the next year. By which time, the majority of the Burlington's steam fleet were relegated to operate east of Lincoln, Nebraska, with only two steam locomotives held for back-up service west of Lincoln. The final division on the CB&Q to be fully dieselized was the Beardstown Division in Southern Illinois, where 2-8-2 locomotive No. 4997 worked
Aurora Subdivision - Misplaced Pages Continue
2436-564: The reorganization of its predecessor, the Trinity and Brazos Valley Railway Company (T&BV), nicknamed the "Boll Weevil Line." Like its predecessor, the BRI was jointly owned by the Chicago, Burlington and Quincy Railroad (CB&Q) and the Chicago, Rock Island and Pacific Railroad (Rock Island), with each company owning half of the railroad. "It took its new name from the two owning systems and operated 303 miles (488 km) of track in 1930." The Trinity and Brazos Valley Railway (T&BV)
2494-407: The road's freight operations. Passenger service was markedly reduced, as people had shifted to using private automobiles for transportation. In late 1966, Louis Menk became president of the Northern Pacific, leaving William John Quinn in charge of the CB&Q. As the financial situation of American railroading continued to decline throughout the 1960s, forcing restructuring across the country,
2552-490: The summer of 1955, the CB&Q hosted a series of occasional steam excursion trains per request of railfan clubs, such as the Illinois Railroad Club. Harry C. Murphy was a steam fan who recognized the popularity in steam locomotives, and he authorized additional steam excursion trains to take place on the railroad throughout the late 1950s and early 1960s. Twenty-one steam locomotives of varying classes took part in
2610-863: The system grew. By the early 1900s, the shops at Aurora served the Chicago Division, the shops in Galesburg, Illinois served the Galesburg Division, the shops in Hannibal, Missouri served the St. Louis Division, the shops in West Burlington, Iowa and in Creston, Iowa served the Iowa Division, and the shops in Denver, Colorado served the McCook and Red Cloud Divisions. The latter were the final steam era shops built for
2668-584: The time the Missouri River bridge at Plattsmouth, Nebraska , was completed the B&MR in Nebraska was well on its way to Denver . That same year, the Nebraska B&MR was purchased by the CB&Q, which completed the line to Denver by 1882. Early repair shops for rolling stock were built by the Aurora Branch Railroad in Chicago, but the first true shop site was established at Aurora, Illinois in 1855. These were capable of repairing and building locomotives, freight cars, and passenger cars. Other shop sites were established or inherited from predecessor lines as
2726-486: The train was put into regularly scheduled service between Lincoln, Nebraska , and Kansas City, Missouri . Although the distinctive, articulated stainless steel trains were well known, and the railroad adopted the "Way of the Zephyrs " advertising slogan, they did not attract passengers back to the rails en masse , and the last one was retired from revenue service with the advent of Amtrak . The Zephyr fleet included: Other named passenger trains which operated on
2784-404: The union threat. The fight dragged on 10 months before the financially and emotionally exhausted strikers finally gave up, and Perkins declared a total victory. However, he had spent heavily on strikebreakers, lawsuits, and police protection, hurting the balance sheets and putting the railroad in a poor position to face the nationwide depression of the Panic of 1893 . Following the purchase of
2842-421: The very end. Actually, I wasn't taking a gamble at all." The manifestation of this gamble was the eight-cylinder Winton 8-201A engine that powered the Burlington Zephyr (built 1934) on its record-breaking run, and it opened the door for developing the long line of diesel engines that has powered Electro-Motive locomotives for the next seventy years. In 1936, the CB&Q would become one of the founding members of
2900-421: The wake of rising operation and maintenance costs and a loss of experienced steam locomotive mechanics; the only factors that kept the CB&Q's steam program going were public demand and Harry Murphy's passion for steam. In the process of reducing operating costs for the railroad, Harry Murphy's successor, Louis Menk, ordered for the CB&Q's steam excursion program to be shut down by August 1, 1966. Despite
2958-441: The west coast on this track. However, with the advent of Amtrak in 1971, the Empire Builder changed its route between Chicago and the Twin Cities to run on the route of the former Milwaukee Road Hiawatha instead. Today, there is no regular passenger service on the line. However, the line does host occasional passenger trains in the form of excursions or for reroutes of the Empire Builder when necessary. The main freight
SECTION 50
#17330863374603016-438: The west side of Chicago. It was opened in 1864, and passenger and freight service began. Regular commuter train service started in 1864 and remains operational to this day, making it the oldest surviving regular passenger service in Chicago. Both the original Chicago line, and to a much lesser extent, the old Aurora Branch right of way, are still in regular use today by the Burlington's present successor BNSF Railway . The company
3074-482: Was bought by Burlington in 1908. Due to the influx of funds from these well-heeled financial partners, by 1907 the T&BV line had been extended to Houston from the Mexia terminal, with a line also added between Waxahachie and Teague . Trackage rights were also soon arranged with other railroads linking the T&BV with Waxahachie and Dallas , Cleburne and Fort Worth , and Houston and Galveston . With ongoing financial problems resulting from inadequate revenue,
3132-434: Was during this period that the Burlington was at its largest, exceeding just over 12,000 route miles in 14 states by the 1920s. With the First World War having the same effect on the railroad as on all other railroads, during the 1920s, the Burlington Route had an increasingly heavy amount of equipment flooding the yards. With the advent of the Great Depression , the CB&Q held a good portion of this for scrap. In 1929,
3190-427: Was never acted upon, and was repealed by an act of February 14, 1855, which instead reorganized the line as the Chicago, Burlington and Quincy Railroad. The new railroad was formed by the consolidation of the Chicago and Aurora Railroad, the Central Military Tract, the west end of the Peoria & Oquawka, and the Northern Cross Railroad companies. With a steady acquisition of locomotives, cars, equipment, and trackage,
3248-428: Was originally chartered on October 9, 1902, its first trackage consisting of an 88-mile (142 km) line from Cleburne, Texas , to Mexia, Texas , which was finished in January 1904. Due to a shortage of operating capital to complete the project, the railroad was acquired in August 1905 by the Colorado and Southern Railway , which later sold a half interest in its investment to the Rock Island. The Colorado and Southern
3306-423: Was preserved, but later scrapped. The Burlington was a leader in innovation; among its firsts were use of the printing telegraph (1910), train radio communications (1915), streamlined passenger diesel power (1934) and vista-dome coaches (1945). In 1927, the railroad was one of the first to use Centralized Traffic Control (CTC) and by the end of 1957 had equipped 1,500 miles (2,400 km) of its line. It played
3364-406: Was renamed Chicago and Aurora Railroad on June 22, 1852, and given expanded powers to extend from Aurora to a point north of LaSalle ; this extension, to Mendota, was completed on October 20, 1853. Another amendment, passed February 28, 1854, authorized the company to build east from Aurora to Chicago via Naperville , and changed its name to Chicago and Southwestern Railroad. The latter provision
#459540